[LL][RTC] Correct misleading note about shadow registers
diff --git a/Inc/stm32g0xx_ll_rtc.h b/Inc/stm32g0xx_ll_rtc.h index 5e56f36..affc938 100644 --- a/Inc/stm32g0xx_ll_rtc.h +++ b/Inc/stm32g0xx_ll_rtc.h
@@ -1121,7 +1121,7 @@ /** * @brief Get time format (AM or PM notation) - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). @@ -1155,7 +1155,7 @@ /** * @brief Get Hours in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). @@ -1190,7 +1190,7 @@ /** * @brief Get Minutes in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). @@ -1225,7 +1225,7 @@ /** * @brief Get Seconds in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). @@ -1275,7 +1275,7 @@ /** * @brief Get time (hour, minute and second) in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). @@ -1421,7 +1421,7 @@ /** * @brief Get Year in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format * @rmtoll RTC_DR YT LL_RTC_DATE_GetYear\n @@ -1455,7 +1455,7 @@ /** * @brief Get Week day - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @rmtoll RTC_DR WDU LL_RTC_DATE_GetWeekDay * @param RTCx RTC Instance @@ -1502,7 +1502,7 @@ /** * @brief Get Month in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format * @rmtoll RTC_DR MT LL_RTC_DATE_GetMonth\n @@ -1544,7 +1544,7 @@ /** * @brief Get Day in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format * @rmtoll RTC_DR DT LL_RTC_DATE_GetDay\n @@ -1606,7 +1606,7 @@ /** * @brief Get date (WeekDay, Day, Month and Year) in BCD format - * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set * before reading this bit * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, * and __LL_RTC_GET_DAY are available to get independently each parameter.