| /** |
| ****************************************************************************** |
| * @file stm32g0xx_hal_rcc_ex.h |
| * @author MCD Application Team |
| * @brief Header file of RCC HAL Extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2018 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32G0xx_HAL_RCC_EX_H |
| #define STM32G0xx_HAL_RCC_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g0xx_hal_def.h" |
| |
| /** @addtogroup STM32G0xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup RCCEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /** @defgroup RCCEx_Exported_Types RCCEx Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief RCC extended clocks structure definition |
| */ |
| typedef struct |
| { |
| uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. |
| This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ |
| |
| uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source. |
| This parameter can be a value of @ref RCCEx_USART1_Clock_Source */ |
| #if (RCC_CCIPR_USART2SEL) |
| uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source. |
| This parameter can be a value of @ref RCCEx_USART2_Clock_Source */ |
| #endif |
| #if (RCC_CCIPR_LPUART1SEL) |
| uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source |
| This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ |
| #endif |
| uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source |
| This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */ |
| |
| uint32_t I2s1ClockSelection; /*!< Specifies I2S1 clock source |
| This parameter can be a value of @ref RCCEx_I2S1_Clock_Source */ |
| |
| #if (RCC_CCIPR_LPTIM1SEL) |
| uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source |
| This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */ |
| #endif |
| #if (RCC_CCIPR_LPTIM2SEL) |
| uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source |
| This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */ |
| #endif |
| #if defined(RNG) |
| uint32_t RngClockSelection; /*!< Specifies RNG clock source |
| This parameter can be a value of @ref RCCEx_RNG_Clock_Source */ |
| #endif |
| uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source |
| This parameter can be a value of @ref RCCEx_ADC_Clock_Source */ |
| #if defined(CEC) |
| uint32_t CecClockSelection; /*!< Specifies CEC Clock clock source |
| This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ |
| #endif |
| #if (RCC_CCIPR_TIM1SEL) |
| uint32_t Tim1ClockSelection; /*!< Specifies TIM1 Clock clock source |
| This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */ |
| #endif |
| #if (RCC_CCIPR_TIM15SEL) |
| uint32_t Tim15ClockSelection; /*!< Specifies TIM15 Clock clock source |
| This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */ |
| #endif |
| uint32_t RTCClockSelection; /*!< Specifies RTC clock source. |
| This parameter can be a value of @ref RCC_RTC_Clock_Source */ |
| } RCC_PeriphCLKInitTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source |
| * @{ |
| */ |
| #define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */ |
| #define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection |
| * @{ |
| */ |
| #define RCC_PERIPHCLK_USART1 0x00000001U |
| #if defined(RCC_CCIPR_USART2SEL) |
| #define RCC_PERIPHCLK_USART2 0x00000002U |
| #endif /* RCC_CCIPR_USART2SEL */ |
| #if defined(RCC_CCIPR_LPUART1SEL) |
| #define RCC_PERIPHCLK_LPUART1 0x00000020U |
| #endif /* RCC_CCIPR_LPUART1SEL */ |
| #define RCC_PERIPHCLK_I2C1 0x00000040U |
| #if defined(RCC_CCIPR_LPTIM1SEL) |
| #define RCC_PERIPHCLK_LPTIM1 0x00000200U |
| #endif /* RCC_CCIPR_LPTIM1SEL */ |
| #if defined(RCC_CCIPR_LPTIM2SEL) |
| #define RCC_PERIPHCLK_LPTIM2 0x00000400U |
| #endif /* RCC_CCIPR_LPTIM2SEL */ |
| #define RCC_PERIPHCLK_I2S1 0x00000800U |
| #define RCC_PERIPHCLK_ADC 0x00004000U |
| #define RCC_PERIPHCLK_RTC 0x00020000U |
| #if defined(RCC_CCIPR_RNGSEL) |
| #define RCC_PERIPHCLK_RNG 0x00040000U |
| #endif /* RCC_CCIPR_RNGSEL */ |
| #if defined(RCC_CCIPR_CECSEL) |
| #define RCC_PERIPHCLK_CEC 0x00080000U |
| #endif /* RCC_CCIPR_CECSEL */ |
| #if defined(RCC_CCIPR_TIM1SEL) |
| #define RCC_PERIPHCLK_TIM1 0x00200000U |
| #endif /* RCC_CCIPR_TIM1SEL */ |
| #if defined(RCC_CCIPR_TIM15SEL) |
| #define RCC_PERIPHCLK_TIM15 0x00400000U |
| #endif /* RCC_CCIPR_TIM15SEL */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RCCEx_USART1_Clock_Source RCC USART1 Clock Source |
| * @{ |
| */ |
| #define RCC_USART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART 1 clock */ |
| #define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0 /*!< SYSCLK clock selected as USART 1 clock */ |
| #define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1 /*!< HSI clock selected as USART 1 clock */ |
| #define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1) /*!< LSE clock selected as USART 1 clock */ |
| /** |
| * @} |
| */ |
| |
| #if defined(RCC_CCIPR_USART2SEL) |
| /** @defgroup RCCEx_USART2_Clock_Source RCC USART2 Clock Source |
| * @{ |
| */ |
| #define RCC_USART2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as USART 2 clock */ |
| #define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0 /*!< SYSCLK clock selected as USART 2 clock */ |
| #define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1 /*!< HSI clock selected as USART 2 clock */ |
| #define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1) /*!< LSE clock selected as USART 2 clock */ |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_USART2SEL */ |
| #if defined(RCC_CCIPR_LPUART1SEL) |
| /** @defgroup RCCEx_LPUART1_Clock_Source RCC LPUART1 Clock Source |
| * @{ |
| */ |
| #define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPUART 1 clock */ |
| #define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock selected as LPUART 1 clock */ |
| #define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock selected as LPUART 1 clock */ |
| #define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1) /*!< LSE clock selected as LPUART 1 clock */ |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_LPUART1SEL */ |
| |
| /** @defgroup RCCEx_I2C1_Clock_Source RCC I2C1 Clock Source |
| * @{ |
| */ |
| #define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as I2C1 clock */ |
| #define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0 /*!< SYSCLK clock selected as I2C1 clock */ |
| #define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1 /*!< HSI clock selected as I2C1 clock */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RCCEx_I2S1_Clock_Source RCC I2S1 Clock Source |
| * @{ |
| */ |
| #define RCC_I2S1CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK clock selected as I2S1 clock */ |
| #define RCC_I2S1CLKSOURCE_PLL RCC_CCIPR_I2S1SEL_0 /*!< PLL "P" selected as I2S1 clock */ |
| #define RCC_I2S1CLKSOURCE_HSI RCC_CCIPR_I2S1SEL_1 /*!< HSI clock selected as I2S1 clock */ |
| #define RCC_I2S1CLKSOURCE_EXT RCC_CCIPR_I2S1SEL /*!< External I2S clock source selected as I2S1 clock */ |
| |
| /** |
| * @} |
| */ |
| |
| #if (RCC_CCIPR_LPTIM1SEL) |
| /** @defgroup RCCEx_LPTIM1_Clock_Source RCC LPTIM1 Clock Source |
| * @{ |
| */ |
| #define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 1 clock */ |
| #define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0 /*!< LSI clock selected as LPTimer 1 clock */ |
| #define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1 /*!< HSI clock selected as LPTimer 1 clock */ |
| #define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL /*!< LSE clock selected as LPTimer 1 clock */ |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_LPTIM1SEL */ |
| |
| #if (RCC_CCIPR_LPTIM2SEL) |
| /** @defgroup RCCEx_LPTIM2_Clock_Source RCC LPTIM2 Clock Source |
| * @{ |
| */ |
| #define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as LPTimer 2 clock */ |
| #define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0 /*!< LSI clock selected as LPTimer 2 clock */ |
| #define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1 /*!< HSI clock selected as LPTimer 2 clock */ |
| #define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL /*!< LSE clock selected as LPTimer 2 clock */ |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_LPTIM2SEL */ |
| |
| #if defined(RNG) |
| /** @defgroup RCCEx_RNG_Clock_Source RCC RNG Clock Source |
| * @{ |
| */ |
| #define RCC_RNGCLKSOURCE_NONE 0x00000000U /*!< No clock selected */ |
| #define RCC_RNGCLKSOURCE_HSI_DIV8 RCC_CCIPR_RNGSEL_0 /*!< HSI oscillator divided by 8 clock selected as RNG clock */ |
| #define RCC_RNGCLKSOURCE_SYSCLK RCC_CCIPR_RNGSEL_1 /*!< SYSCLK selected as RNG clock */ |
| #define RCC_RNGCLKSOURCE_PLL (RCC_CCIPR_RNGSEL_0|RCC_CCIPR_RNGSEL_1) /*!< PLL "Q" selected as RNG clock */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RCCEx_RNG_Division_factor RCC RNG Division factor |
| * @{ |
| */ |
| #define RCC_RNGCLK_DIV1 0x00000000U /*!< RNG clock not divided */ |
| #define RCC_RNGCLK_DIV2 RCC_CCIPR_RNGDIV_0 /*!< RNG clock divided by 2 */ |
| #define RCC_RNGCLK_DIV4 RCC_CCIPR_RNGDIV_1 /*!< RNG clock divided by 4 */ |
| #define RCC_RNGCLK_DIV8 (RCC_CCIPR_RNGDIV_0|RCC_CCIPR_RNGDIV_1) /*!< RNG clock divided by 8 */ |
| |
| /** |
| * @} |
| */ |
| #endif /* RNG */ |
| |
| /** @defgroup RCCEx_ADC_Clock_Source RCC ADC Clock Source |
| * @{ |
| */ |
| |
| #define RCC_ADCCLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as ADC clock */ |
| #define RCC_ADCCLKSOURCE_PLLADC RCC_CCIPR_ADCSEL_0 /*!< PLL "P" (PLLADC) used as ADC clock */ |
| #define RCC_ADCCLKSOURCE_HSI RCC_CCIPR_ADCSEL_1 /*!< HSI used as ADC clock */ |
| /** |
| * @} |
| */ |
| |
| #if defined(CEC) |
| /** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source |
| * @{ |
| */ |
| #define RCC_CECCLKSOURCE_HSI_DIV488 0x00000000U /*!< HSI oscillator clock divided by 488 used as default CEC clock */ |
| #define RCC_CECCLKSOURCE_LSE RCC_CCIPR_CECSEL /*!< LSE oscillator clock used as CEC clock */ |
| /** |
| * @} |
| */ |
| #endif /* CEC */ |
| |
| #if (RCC_CCIPR_TIM1SEL) |
| /** @defgroup RCCEx_TIM1_Clock_Source RCC TIM1 Clock Source |
| * @{ |
| */ |
| #define RCC_TIM1CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 1 clock */ |
| #define RCC_TIM1CLKSOURCE_PLL RCC_CCIPR_TIM1SEL /*!< PLL "Q" clock selected as Timer 1 clock */ |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_TIM1SEL */ |
| |
| #if (RCC_CCIPR_TIM15SEL) |
| /** @defgroup RCCEx_TIM15_Clock_Source RCC TIM15 Clock Source |
| * @{ |
| */ |
| #define RCC_TIM15CLKSOURCE_PCLK1 0x00000000U /*!< APB clock selected as Timer 15 clock */ |
| #define RCC_TIM15CLKSOURCE_PLL RCC_CCIPR_TIM15SEL /*!< PLL "Q" clock selected as Timer 15 clock */ |
| |
| /** |
| * @} |
| */ |
| #endif /* RCC_CCIPR_TIM15SEL */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros |
| * @{ |
| */ |
| |
| |
| /** @brief Macro to configure the I2C1 clock (I2C1CLK). |
| * |
| * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock |
| * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock |
| */ |
| #define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the I2C1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock |
| * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock |
| */ |
| #define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))) |
| |
| /** @brief Macro to configure the I2S1 clock (I2S1CLK). |
| * |
| * @param __I2S1_CLKSOURCE__ specifies the I2S1 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock |
| */ |
| #define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the I2S1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_I2S1CLKSOURCE_SYSCLK System Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_PLL PLLP Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_HSI HSI Clock selected as I2S1 clock |
| * @arg @ref RCC_I2S1CLKSOURCE_EXT External clock selected as I2S1 clock |
| */ |
| #define __HAL_RCC_GET_I2S1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_I2S1SEL))) |
| |
| |
| /** @brief Macro to configure the USART1 clock (USART1CLK). |
| * |
| * @param __USART1_CLKSOURCE__ specifies the USART1 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock |
| */ |
| #define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the USART1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_USART1CLKSOURCE_PCLK1 PCLK1 selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock |
| * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock |
| */ |
| #define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))) |
| |
| #if defined(RCC_CCIPR_USART2SEL) |
| /** @brief Macro to configure the USART2 clock (USART2CLK). |
| * |
| * @param __USART2_CLKSOURCE__ specifies the USART2 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock |
| */ |
| #define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__)) |
| |
| /** @brief Macro to get the USART2 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock |
| * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock |
| */ |
| #define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL))) |
| #endif /* RCC_CCIPR_USART2SEL */ |
| |
| #if defined(RCC_CCIPR_LPUART1SEL) |
| /** @brief Macro to configure the LPUART1 clock (LPUART1CLK). |
| * |
| * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock |
| */ |
| #define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the LPUART1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock |
| * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock |
| */ |
| #define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL))) |
| #endif /* RCC_CCIPR_LPUART1SEL */ |
| |
| #if (RCC_CCIPR_LPTIM1SEL) |
| /** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK). |
| * |
| * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock |
| */ |
| #define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the LPTIM1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock |
| * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock |
| */ |
| #define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL))) |
| #endif /* RCC_CCIPR_LPTIM1SEL */ |
| |
| #if (RCC_CCIPR_LPTIM2SEL) |
| /** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK). |
| * |
| * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock |
| */ |
| #define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__)) |
| |
| /** @brief Macro to get the LPTIM2 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPTIM2 clock |
| * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock |
| */ |
| #define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL))) |
| #endif /* RCC_CCIPR_LPTIM2SEL */ |
| |
| #if defined(CEC) |
| /** @brief Macro to configure the CEC clock (CECCLK). |
| * |
| * @param __CEC_CLKSOURCE__ specifies the CEC clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 selected as CEC clock |
| * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock |
| */ |
| #define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__)) |
| |
| /** @brief Macro to get the CEC clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_CECCLKSOURCE_HSI_DIV488 HSI_DIV_488 Clock selected as CEC clock |
| * @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock |
| */ |
| #define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_CECSEL))) |
| #endif /* CEC */ |
| |
| #if defined(RNG) |
| /** @brief Macro to configure the RNG clock. |
| * |
| * |
| * @param __RNG_CLKSOURCE__ specifies the RNG clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divided by 8 selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System Clock selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock |
| */ |
| #define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__)) |
| |
| /** @brief Macro to get the RNG clock. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_HSI_DIV8 HSI Clock divide by 8 selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_SYSCLK System clock selected as RNG clock |
| * @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock |
| */ |
| #define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGSEL))) |
| |
| /** @brief Macro to configure the RNG clock. |
| * |
| * |
| * @param __RNG_CLKDIV__ specifies the RNG clock division factor. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided |
| * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 |
| * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 |
| * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 |
| */ |
| #define __HAL_RCC_RNGDIV_CONFIG(__RNG_CLKDIV__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__)) |
| |
| /** @brief Macro to get the RNG clock division factor. |
| * @retval The division factor can be one of the following values: |
| * @arg @ref RCC_RNGCLK_DIV1 RNG Clock not divided |
| * @arg @ref RCC_RNGCLK_DIV2 RNG Clock divided by 2 |
| * @arg @ref RCC_RNGCLK_DIV4 RNG Clock divided by 4 |
| * @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8 |
| */ |
| #define __HAL_RCC_GET_RNG_DIV() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_RNGDIV))) |
| #endif /* RNG */ |
| |
| /** @brief Macro to configure the ADC interface clock |
| * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock |
| * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock |
| * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock |
| */ |
| #define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__)) |
| |
| /** @brief Macro to get the ADC clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_ADCCLKSOURCE_PLLADC PLL "P" (PLLADC) Clock selected as ADC clock |
| * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock |
| * @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock |
| */ |
| #define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))) |
| |
| #if (RCC_CCIPR_TIM1SEL) |
| /** @brief Macro to configure the TIM1 interface clock |
| * @param __TIM1_CLKSOURCE__ specifies the TIM1 digital interface clock source. |
| * This parameter can be one of the following values: |
| * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock |
| * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock |
| */ |
| #define __HAL_RCC_TIM1_CONFIG(__TIM1_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__)) |
| |
| /** @brief Macro to get the TIM1 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_TIM1CLKSOURCE_PLL PLLQ Output Clock selected as TIM1 clock |
| * @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock |
| */ |
| #define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM1SEL))) |
| #endif /* RCC_CCIPR_TIM1SEL */ |
| |
| #if (RCC_CCIPR_TIM15SEL) |
| /** @brief Macro to configure the TIM15 interface clock |
| * @param __TIM15_CLKSOURCE__ specifies the TIM15 digital interface clock source. |
| * This parameter can be one of the following values: |
| * @arg RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock |
| * @arg RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock |
| */ |
| #define __HAL_RCC_TIM15_CONFIG(__TIM15_CLKSOURCE__) \ |
| MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__)) |
| |
| /** @brief Macro to get the TIM15 clock source. |
| * @retval The clock source can be one of the following values: |
| * @arg @ref RCC_TIM15CLKSOURCE_PLL PLLQ Output Clock selected as TIM15 clock |
| * @arg @ref RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock |
| */ |
| #define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CCIPR, RCC_CCIPR_TIM15SEL))) |
| #endif /* RCC_CCIPR_TIM15SEL */ |
| |
| /** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management |
| * @brief macros to manage the specified RCC Flags and interrupts. |
| * @{ |
| */ |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup RCCEx_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup RCCEx_Exported_Functions_Group1 |
| * @{ |
| */ |
| |
| HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); |
| void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); |
| uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup RCCEx_Exported_Functions_Group2 |
| * @{ |
| */ |
| |
| void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource); |
| void HAL_RCCEx_DisableLSCO(void); |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup RCCEx_Private_Macros RCCEx Private Macros |
| * @{ |
| */ |
| |
| #define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ |
| ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) |
| |
| #if defined(STM32G081xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) |
| #elif defined(STM32G071xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15)) |
| #elif defined(STM32G070xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) |
| #elif defined(STM32G041xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) |
| #elif defined(STM32G031xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1)) |
| #elif defined(STM32G030xx) |
| #define IS_RCC_PERIPHCLOCK(__SELECTION__) \ |
| ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ |
| (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) |
| #endif /* STM32G081xx */ |
| |
| #define IS_RCC_USART1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \ |
| ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \ |
| ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI)) |
| |
| #if (RCC_CCIPR_USART2SEL) |
| #define IS_RCC_USART2CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \ |
| ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \ |
| ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI)) |
| #endif /* RCC_CCIPR_USART2SEL */ |
| |
| #if (RCC_CCIPR_LPUART1SEL) |
| #define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \ |
| ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \ |
| ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI)) |
| #endif /* RCC_CCIPR_LPUART1SEL */ |
| |
| #define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \ |
| ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI)) |
| |
| #define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \ |
| ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \ |
| ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \ |
| ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT)) |
| |
| #if (RCC_CCIPR_LPTIM1SEL) |
| #define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \ |
| ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \ |
| ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \ |
| ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE)) |
| #endif /* RCC_CCIPR_LPTIM1SEL */ |
| |
| #if (RCC_CCIPR_LPTIM2SEL) |
| #define IS_RCC_LPTIM2CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \ |
| ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \ |
| ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \ |
| ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE)) |
| #endif /* RCC_CCIPR_LPTIM2SEL */ |
| |
| #define IS_RCC_ADCCLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \ |
| ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI)) |
| |
| #if defined(RNG) |
| #define IS_RCC_RNGCLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \ |
| ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \ |
| ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \ |
| ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL)) |
| #define IS_RCC_RNGDIV(__DIV__) \ |
| (((__DIV__) == RCC_RNGCLK_DIV1) || \ |
| ((__DIV__) == RCC_RNGCLK_DIV2) || \ |
| ((__DIV__) == RCC_RNGCLK_DIV4) || \ |
| ((__DIV__) == RCC_RNGCLK_DIV8)) |
| #endif /* RNG */ |
| |
| #if defined(CEC) |
| #define IS_RCC_CECCLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \ |
| ((__SOURCE__) == RCC_CECCLKSOURCE_LSE)) |
| #endif /* CEC */ |
| |
| #if (RCC_CCIPR_TIM1SEL) |
| #define IS_RCC_TIM1CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \ |
| ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1)) |
| #endif /* RCC_CCIPR_TIM1SEL */ |
| |
| #if (RCC_CCIPR_TIM15SEL) |
| #define IS_RCC_TIM15CLKSOURCE(__SOURCE__) \ |
| (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \ |
| ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1)) |
| #endif /* RCC_CCIPR_TIM15SEL */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32G0xx_HAL_RCC_EX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |