| /** |
| ****************************************************************************** |
| * @file stm32g0xx_hal_tim_ex.h |
| * @author MCD Application Team |
| * @brief Header file of TIM HAL Extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2018 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32G0xx_HAL_TIM_EX_H |
| #define STM32G0xx_HAL_TIM_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g0xx_hal_def.h" |
| |
| /** @addtogroup STM32G0xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup TIMEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Types TIM Extended Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief TIM Hall sensor Configuration Structure definition |
| */ |
| |
| typedef struct |
| { |
| uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Input_Capture_Polarity */ |
| |
| uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ |
| |
| uint32_t IC1Filter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| |
| uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ |
| } TIM_HallSensor_InitTypeDef; |
| |
| /** |
| * @brief TIM Break/Break2 input configuration |
| */ |
| typedef struct |
| { |
| uint32_t Source; /*!< Specifies the source of the timer break input. |
| This parameter can be a value of @ref TIMEx_Break_Input_Source */ |
| uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. |
| This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ |
| uint32_t Polarity; /*!< Specifies the break input source polarity. |
| This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ |
| } TIMEx_BreakInputConfigTypeDef; |
| |
| /** |
| * @} |
| */ |
| /* End of exported types -----------------------------------------------------*/ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup TIMEx_Remap TIM Extended Remapping |
| * @{ |
| */ |
| #define TIM_TIM1_ETR_GPIO 0x00000000U /* !< TIM1_ETR is connected to GPIO */ |
| #if defined(COMP1) && defined(COMP2) |
| #define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /* !< TIM1_ETR is connected to COMP1 output */ |
| #define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /* !< TIM1_ETR is connected to COMP2 output */ |
| #endif /* COMP1 && COMP2 */ |
| #define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD1 */ |
| #define TIM_TIM1_ETR_ADC1_AWD2 TIM1_AF1_ETRSEL_2 /* !< TIM1_ETR is connected to ADC1 AWD2 */ |
| #define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */ |
| #if defined(COMP3) |
| #define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to COMP3 output */ |
| #endif /* COMP3 */ |
| #if defined(TIM2) |
| #define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */ |
| #define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */ |
| #define TIM_TIM2_ETR_COMP2 TIM2_AF1_ETRSEL_1 /* !< TIM2_ETR is connected to COMP2 output */ |
| #define TIM_TIM2_ETR_LSE (TIM2_AF1_ETRSEL_1 | TIM2_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to LSE */ |
| #if defined(COMP3) |
| #define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to MCO */ |
| #define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to MCO2 */ |
| #define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP3 output */ |
| #endif /* COMP3 */ |
| #endif /* TIM2 */ |
| #if defined(TIM3) |
| #define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */ |
| #if defined(COMP1) && defined(COMP2) |
| #define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /* !< TIM3_ETR is connected to COMP1 output */ |
| #define TIM_TIM3_ETR_COMP2 TIM3_AF1_ETRSEL_1 /* !< TIM3_ETR is connected to COMP2 output */ |
| #endif /* COMP1 && COMP2 */ |
| #if defined(COMP3) |
| #define TIM_TIM3_ETR_COMP3 (TIM3_AF1_ETRSEL_1 | TIM3_AF1_ETRSEL_0) /* !< TIM3_ETR is connected to COMP3 output */ |
| #endif /* COMP3 */ |
| #endif /* TIM3 */ |
| #if defined(TIM4) |
| #define TIM_TIM4_ETR_GPIO 0x00000000U /* !< TIM4_ETR is connected to GPIO */ |
| #if defined(COMP1) && defined(COMP2) |
| #define TIM_TIM4_ETR_COMP1 TIM4_AF1_ETRSEL_0 /* !< TIM4_ETR is connected to COMP1 output */ |
| #define TIM_TIM4_ETR_COMP2 TIM4_AF1_ETRSEL_1 /* !< TIM4_ETR is connected to COMP2 output */ |
| #endif /* COMP1 && COMP2 */ |
| #if defined(COMP3) |
| #define TIM_TIM4_ETR_COMP3 (TIM4_AF1_ETRSEL_1 | TIM4_AF1_ETRSEL_0) /* !< TIM4_ETR is connected to COMP3 output */ |
| #endif /* COMP3 */ |
| #endif /* TIM4 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIMEx_Break_Input TIM Extended Break input |
| * @{ |
| */ |
| #define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ |
| #define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source |
| * @{ |
| */ |
| #define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /* !< An external source (GPIO) is connected to the BKIN pin */ |
| #if defined(COMP1) && defined(COMP2) |
| #define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /* !< The COMP1 output is connected to the break input */ |
| #define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /* !< The COMP2 output is connected to the break input */ |
| #endif /* COMP1 && COMP2 */ |
| #if defined(COMP3) |
| #define TIM_BREAKINPUTSOURCE_COMP3 0x00000008U /* !< The COMP3 output is connected to the break input */ |
| #endif /* COMP3 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling |
| * @{ |
| */ |
| #define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ |
| #define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity |
| * @{ |
| */ |
| #define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ |
| #define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection |
| * @{ |
| */ |
| #define TIM_TIM1_TI1_GPIO 0x00000000U /* !< TIM1_TI1 is connected to GPIO */ |
| #if defined(COMP1) |
| #define TIM_TIM1_TI1_COMP1 0x00000001U /* !< TIM1_TI1 is connected to COMP1 OUT */ |
| #endif /* COMP1 */ |
| |
| #define TIM_TIM1_TI2_GPIO 0x00000000U /* !< TIM1_TI2 is connected to GPIO */ |
| #if defined(COMP2) |
| #define TIM_TIM1_TI2_COMP2 0x00000100U /* !< TIM1_TI2 is connected to COMP2 OUT */ |
| #endif /* COMP2 */ |
| |
| #define TIM_TIM1_TI3_GPIO 0x00000000U /* !< TIM1_TI3 is connected to GPIO */ |
| #if defined(COMP3) |
| #define TIM_TIM1_TI3_COMP3 0x00010000U /* !< TIM1_TI3 is connected to COMP3 OUT */ |
| #endif /* COMP3 */ |
| |
| #if defined(TIM2) |
| #define TIM_TIM2_TI1_GPIO 0x00000000U /* !< TIM2_TI1 is connected to GPIO */ |
| #define TIM_TIM2_TI1_COMP1 0x00000001U /* !< TIM2_TI1 is connected to COMP1 OUT */ |
| |
| #define TIM_TIM2_TI2_GPIO 0x00000000U /* !< TIM2_TI2 is connected to GPIO */ |
| #define TIM_TIM2_TI2_COMP2 0x00000100U /* !< TIM2_TI2 is connected to COMP2 OUT */ |
| |
| #define TIM_TIM2_TI3_GPIO 0x00000000U /* !< TIM2_TI3 is connected to GPIO */ |
| #if defined(COMP3) |
| #define TIM_TIM2_TI3_COMP3 0x00010000U /* !< TIM2_TI3 is connected to COMP3 OUT */ |
| #endif /* COMP3 */ |
| #endif /* TIM2 */ |
| |
| #define TIM_TIM3_TI1_GPIO 0x00000000U /* !< TIM3_TI1 is connected to GPIO */ |
| #if defined(COMP1) |
| #define TIM_TIM3_TI1_COMP1 0x00000001U /* !< TIM3_TI1 is connected to COMP1 OUT */ |
| #endif /* COMP1 */ |
| |
| #define TIM_TIM3_TI2_GPIO 0x00000000U /* !< TIM3_TI2 is connected to GPIO */ |
| #if defined(COMP2) |
| #define TIM_TIM3_TI2_COMP2 0x00000100U /* !< TIM3_TI2 is connected to COMP2 OUT */ |
| #endif /* COMP2 */ |
| |
| #define TIM_TIM3_TI3_GPIO 0x00000000U /* !< TIM3_TI3 is connected to GPIO */ |
| #if defined(COMP3) |
| #define TIM_TIM3_TI3_COMP3 0x00010000U /* !< TIM3_TI3 is connected to COMP3 OUT */ |
| #endif /* COMP3 */ |
| |
| #if defined(TIM4) |
| #define TIM_TIM4_TI1_GPIO 0x00000000U /* !< TIM4_TI1 is connected to GPIO */ |
| #if defined(COMP1) |
| #define TIM_TIM4_TI1_COMP1 0x00000001U /* !< TIM4_TI1 is connected to COMP1 OUT */ |
| #endif /* COMP1 */ |
| |
| #define TIM_TIM4_TI2_GPIO 0x00000000U /* !< TIM4_TI2 is connected to GPIO */ |
| #if defined(COMP2) |
| #define TIM_TIM4_TI2_COMP2 0x00000100U /* !< TIM4_TI2 is connected to COMP2 OUT */ |
| #endif /* COMP2 */ |
| |
| #define TIM_TIM4_TI3_GPIO 0x00000000U /* !< TIM4_TI3 is connected to GPIO */ |
| #if defined(COMP3) |
| #define TIM_TIM4_TI3_COMP3 0x00010000U /* !< TIM4_TI3 is connected to COMP3 OUT */ |
| #endif /* COMP3 */ |
| #endif /* TIM4 */ |
| |
| #define TIM_TIM14_TI1_GPIO 0x00000000U /* !< TIM14_TI1 is connected to GPIO */ |
| #define TIM_TIM14_TI1_RTC 0x00000001U /* !< TIM14_TI1 is connected to RTC clock */ |
| #define TIM_TIM14_TI1_HSE_32 0x00000002U /* !< TIM14_TI1 is connected to HSE div 32 */ |
| #define TIM_TIM14_TI1_MCO 0x00000003U /* !< TIM14_TI1 is connected to MCO */ |
| #if defined(RCC_MCO2_SUPPORT) |
| #define TIM_TIM14_TI1_MCO2 0x00000004U /* !< TIM14_TI1 is connected to MCO2 */ |
| #endif |
| |
| #if defined(TIM15) |
| #define TIM_TIM15_TI1_GPIO 0x00000000U /* !< TIM15_TI1 is connected to GPIO */ |
| #define TIM_TIM15_TI1_TIM2_CH1 0x00000001U /* !< TIM15_TI1 is connected to TIM2 CH1 */ |
| #define TIM_TIM15_TI1_TIM3_CH1 0x00000002U /* !< TIM15_TI1 is connected to TIM3 CH1 */ |
| |
| #define TIM_TIM15_TI2_GPIO 0x00000000U /* !< TIM15_TI2 is connected to GPIO */ |
| #define TIM_TIM15_TI2_TIM2_CH2 0x00000100U /* !< TIM15_TI2 is connected to TIM2 CH2 */ |
| #define TIM_TIM15_TI2_TIM3_CH2 0x00000200U /* !< TIM15_TI2 is connected to TIM3 CH2 */ |
| #endif /* TIM15 */ |
| |
| #define TIM_TIM16_TI1_GPIO 0x00000000U /* !< TIM16_TI1 is connected to GPIO */ |
| #define TIM_TIM16_TI1_LSI 0x00000001U /* !< TIM16_TI1 is connected to LSI */ |
| #define TIM_TIM16_TI1_LSE 0x00000002U /* !< TIM16_TI1 is connected to LSE */ |
| #define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /* !< TIM16_TI1 is connected to TRC wakeup interrupt */ |
| #if defined(RCC_MCO2_SUPPORT) |
| #define TIM_TIM16_TI1_MCO2 0x00000004U /* !< TIM16_TI1 is connected to MCO2 */ |
| #endif /* RCC_MCO2_SUPPORT */ |
| |
| #define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17_TI1 is connected to GPIO */ |
| #if defined(RCC_HSI48_SUPPORT) |
| #define TIM_TIM17_TI1_HSI48 0x00000001U /* !< TIM17_TI1 is connected to HSI48/256 */ |
| #endif /* RCC_HSI48_SUPPORT */ |
| #define TIM_TIM17_TI1_HSE_32 0x00000002U /* !< TIM17_TI1 is connected to HSE div 32 */ |
| #define TIM_TIM17_TI1_MCO 0x00000003U /* !< TIM17_TI1 is connected to MCO */ |
| #if defined(RCC_MCO2_SUPPORT) |
| #define TIM_TIM17_TI1_MCO2 0x00000004U /* !< TIM17_TI1 is connected to MCO2 */ |
| #endif /* RCC_MCO2_SUPPORT */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported constants -------------------------------------------------*/ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported macro -----------------------------------------------------*/ |
| |
| /* Private macro -------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Private_Macros TIM Extended Private Macros |
| * @{ |
| */ |
| #define IS_TIM_REMAP(__REMAP__) ((((__REMAP__) & 0xFFFC3FFFU) == 0x00000000U)) |
| |
| #define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ |
| ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) |
| |
| #if defined(COMP1) && defined(COMP2) && defined(COMP3) |
| #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ |
| ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ |
| ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ |
| ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP3)) |
| #elif defined(COMP1) && defined(COMP2) |
| #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ |
| ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ |
| ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2)) |
| #else |
| #define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) ((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) |
| #endif /* COMP1 && COMP2 && COMP3 */ |
| |
| #define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ |
| ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) |
| |
| #define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ |
| ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) |
| |
| #define IS_TIM_TISEL(__TISEL__) ((((__TISEL__) & 0xF0F0F0F0U) == 0x00000000U)) |
| |
| /** |
| * @} |
| */ |
| /* End of private macro ------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions |
| * @brief Timer Hall Sensor functions |
| * @{ |
| */ |
| /* Timer Hall Sensor functions **********************************************/ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); |
| |
| void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); |
| |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions |
| * @brief Timer Complementary Output Compare functions |
| * @{ |
| */ |
| /* Timer Complementary Output Compare functions *****************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions |
| * @brief Timer Complementary PWM functions |
| * @{ |
| */ |
| /* Timer Complementary PWM functions ****************************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions |
| * @brief Timer Complementary One Pulse functions |
| * @{ |
| */ |
| /* Timer Complementary One Pulse functions **********************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions |
| * @brief Peripheral Control functions |
| * @{ |
| */ |
| /* Extended Control functions ************************************************/ |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, |
| TIM_MasterConfigTypeDef *sMasterConfig); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, |
| TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, |
| TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); |
| HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); |
| HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); |
| HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); |
| |
| HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); |
| HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions |
| * @brief Extended Callbacks functions |
| * @{ |
| */ |
| /* Extended Callback **********************************************************/ |
| void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions |
| * @brief Extended Peripheral State functions |
| * @{ |
| */ |
| /* Extended Peripheral State functions ***************************************/ |
| HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported functions -------------------------------------------------*/ |
| |
| /* Private functions----------------------------------------------------------*/ |
| /** @addtogroup TIMEx_Private_Functions TIMEx Private Functions |
| * @{ |
| */ |
| void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); |
| void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); |
| /** |
| * @} |
| */ |
| /* End of private functions --------------------------------------------------*/ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* STM32G0xx_HAL_TIM_EX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |