| /** |
| ****************************************************************************** |
| * @file stm32g4xx_ll_crc.h |
| * @author MCD Application Team |
| * @brief Header file of CRC LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32G4xx_LL_CRC_H |
| #define STM32G4xx_LL_CRC_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx.h" |
| |
| /** @addtogroup STM32G4xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(CRC) |
| |
| /** @defgroup CRC_LL CRC |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup CRC_LL_Exported_Constants CRC Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length |
| * @{ |
| */ |
| #define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ |
| #define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ |
| #define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ |
| #define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse |
| * @{ |
| */ |
| #define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ |
| #define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ |
| #define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ |
| #define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse |
| * @{ |
| */ |
| #define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ |
| #define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value |
| * @brief Normal representation of this polynomial value is |
| * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . |
| * @{ |
| */ |
| #define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value |
| * @{ |
| */ |
| #define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup CRC_LL_Exported_Macros CRC Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros |
| * @{ |
| */ |
| |
| /** |
| * @brief Write a value in CRC register |
| * @param __INSTANCE__ CRC Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) |
| |
| /** |
| * @brief Read a value in CRC register |
| * @param __INSTANCE__ CRC Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup CRC_LL_Exported_Functions CRC Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup CRC_LL_EF_Configuration CRC Configuration functions |
| * @{ |
| */ |
| |
| /** |
| * @brief Reset the CRC calculation unit. |
| * @note If Programmable Initial CRC value feature |
| * is available, also set the Data Register to the value stored in the |
| * CRC_INIT register, otherwise, reset Data Register to its default value. |
| * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit |
| * @param CRCx CRC Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) |
| { |
| SET_BIT(CRCx->CR, CRC_CR_RESET); |
| } |
| |
| /** |
| * @brief Configure size of the polynomial. |
| * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize |
| * @param CRCx CRC Instance |
| * @param PolySize This parameter can be one of the following values: |
| * @arg @ref LL_CRC_POLYLENGTH_32B |
| * @arg @ref LL_CRC_POLYLENGTH_16B |
| * @arg @ref LL_CRC_POLYLENGTH_8B |
| * @arg @ref LL_CRC_POLYLENGTH_7B |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) |
| { |
| MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); |
| } |
| |
| /** |
| * @brief Return size of the polynomial. |
| * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize |
| * @param CRCx CRC Instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_CRC_POLYLENGTH_32B |
| * @arg @ref LL_CRC_POLYLENGTH_16B |
| * @arg @ref LL_CRC_POLYLENGTH_8B |
| * @arg @ref LL_CRC_POLYLENGTH_7B |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); |
| } |
| |
| /** |
| * @brief Configure the reversal of the bit order of the input data |
| * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode |
| * @param CRCx CRC Instance |
| * @param ReverseMode This parameter can be one of the following values: |
| * @arg @ref LL_CRC_INDATA_REVERSE_NONE |
| * @arg @ref LL_CRC_INDATA_REVERSE_BYTE |
| * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD |
| * @arg @ref LL_CRC_INDATA_REVERSE_WORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) |
| { |
| MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); |
| } |
| |
| /** |
| * @brief Return type of reversal for input data bit order |
| * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode |
| * @param CRCx CRC Instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_CRC_INDATA_REVERSE_NONE |
| * @arg @ref LL_CRC_INDATA_REVERSE_BYTE |
| * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD |
| * @arg @ref LL_CRC_INDATA_REVERSE_WORD |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); |
| } |
| |
| /** |
| * @brief Configure the reversal of the bit order of the Output data |
| * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode |
| * @param CRCx CRC Instance |
| * @param ReverseMode This parameter can be one of the following values: |
| * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE |
| * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) |
| { |
| MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); |
| } |
| |
| /** |
| * @brief Configure the reversal of the bit order of the Output data |
| * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode |
| * @param CRCx CRC Instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE |
| * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); |
| } |
| |
| /** |
| * @brief Initialize the Programmable initial CRC value. |
| * @note If the CRC size is less than 32 bits, the least significant bits |
| * are used to write the correct value |
| * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. |
| * @rmtoll INIT INIT LL_CRC_SetInitialData |
| * @param CRCx CRC Instance |
| * @param InitCrc Value to be programmed in Programmable initial CRC value register |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) |
| { |
| WRITE_REG(CRCx->INIT, InitCrc); |
| } |
| |
| /** |
| * @brief Return current Initial CRC value. |
| * @note If the CRC size is less than 32 bits, the least significant bits |
| * are used to read the correct value |
| * @rmtoll INIT INIT LL_CRC_GetInitialData |
| * @param CRCx CRC Instance |
| * @retval Value programmed in Programmable initial CRC value register |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_GetInitialData(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_REG(CRCx->INIT)); |
| } |
| |
| /** |
| * @brief Initialize the Programmable polynomial value |
| * (coefficients of the polynomial to be used for CRC calculation). |
| * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. |
| * @note Please check Reference Manual and existing Errata Sheets, |
| * regarding possible limitations for Polynomial values usage. |
| * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 |
| * @rmtoll POL POL LL_CRC_SetPolynomialCoef |
| * @param CRCx CRC Instance |
| * @param PolynomCoef Value to be programmed in Programmable Polynomial value register |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) |
| { |
| WRITE_REG(CRCx->POL, PolynomCoef); |
| } |
| |
| /** |
| * @brief Return current Programmable polynomial value |
| * @note Please check Reference Manual and existing Errata Sheets, |
| * regarding possible limitations for Polynomial values usage. |
| * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 |
| * @rmtoll POL POL LL_CRC_GetPolynomialCoef |
| * @param CRCx CRC Instance |
| * @retval Value programmed in Programmable Polynomial value register |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_REG(CRCx->POL)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_LL_EF_Data_Management Data_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Write given 32-bit data to the CRC calculator |
| * @rmtoll DR DR LL_CRC_FeedData32 |
| * @param CRCx CRC Instance |
| * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) |
| { |
| WRITE_REG(CRCx->DR, InData); |
| } |
| |
| /** |
| * @brief Write given 16-bit data to the CRC calculator |
| * @rmtoll DR DR LL_CRC_FeedData16 |
| * @param CRCx CRC Instance |
| * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) |
| { |
| __IO uint16_t *pReg; |
| |
| pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ |
| *pReg = InData; |
| } |
| |
| /** |
| * @brief Write given 8-bit data to the CRC calculator |
| * @rmtoll DR DR LL_CRC_FeedData8 |
| * @param CRCx CRC Instance |
| * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) |
| { |
| *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; |
| } |
| |
| /** |
| * @brief Return current CRC calculation result. 32 bits value is returned. |
| * @rmtoll DR DR LL_CRC_ReadData32 |
| * @param CRCx CRC Instance |
| * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_ReadData32(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_REG(CRCx->DR)); |
| } |
| |
| /** |
| * @brief Return current CRC calculation result. 16 bits value is returned. |
| * @note This function is expected to be used in a 16 bits CRC polynomial size context. |
| * @rmtoll DR DR LL_CRC_ReadData16 |
| * @param CRCx CRC Instance |
| * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). |
| */ |
| __STATIC_INLINE uint16_t LL_CRC_ReadData16(CRC_TypeDef *CRCx) |
| { |
| return (uint16_t)READ_REG(CRCx->DR); |
| } |
| |
| /** |
| * @brief Return current CRC calculation result. 8 bits value is returned. |
| * @note This function is expected to be used in a 8 bits CRC polynomial size context. |
| * @rmtoll DR DR LL_CRC_ReadData8 |
| * @param CRCx CRC Instance |
| * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). |
| */ |
| __STATIC_INLINE uint8_t LL_CRC_ReadData8(CRC_TypeDef *CRCx) |
| { |
| return (uint8_t)READ_REG(CRCx->DR); |
| } |
| |
| /** |
| * @brief Return current CRC calculation result. 7 bits value is returned. |
| * @note This function is expected to be used in a 7 bits CRC polynomial size context. |
| * @rmtoll DR DR LL_CRC_ReadData7 |
| * @param CRCx CRC Instance |
| * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). |
| */ |
| __STATIC_INLINE uint8_t LL_CRC_ReadData7(CRC_TypeDef *CRCx) |
| { |
| return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); |
| } |
| |
| /** |
| * @brief Return data stored in the Independent Data(IDR) register. |
| * @note This register can be used as a temporary storage location for one 32-bit long data. |
| * @rmtoll IDR IDR LL_CRC_Read_IDR |
| * @param CRCx CRC Instance |
| * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). |
| */ |
| __STATIC_INLINE uint32_t LL_CRC_Read_IDR(CRC_TypeDef *CRCx) |
| { |
| return (uint32_t)(READ_REG(CRCx->IDR)); |
| } |
| |
| /** |
| * @brief Store data in the Independent Data(IDR) register. |
| * @note This register can be used as a temporary storage location for one 32-bit long data. |
| * @rmtoll IDR IDR LL_CRC_Write_IDR |
| * @param CRCx CRC Instance |
| * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) |
| { |
| *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; |
| } |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx); |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(CRC) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32G4xx_LL_CRC_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |