| /** |
| ****************************************************************************** |
| * @file stm32g4xx_hal_dma.c |
| * @author MCD Application Team |
| * @brief DMA HAL module driver. |
| * This file provides firmware functions to manage the following |
| * functionalities of the Direct Memory Access (DMA) peripheral: |
| * + Initialization and de-initialization functions |
| * + IO operation functions |
| * + Peripheral State and errors functions |
| @verbatim |
| ============================================================================== |
| ##### How to use this driver ##### |
| ============================================================================== |
| [..] |
| (#) Enable and configure the peripheral to be connected to the DMA Channel |
| (except for internal SRAM / FLASH memories: no initialization is |
| necessary). Please refer to the Reference manual for connection between peripherals |
| and DMA requests. |
| |
| (#) For a given Channel, program the required configuration through the following parameters: |
| Channel request, Transfer Direction, Source and Destination data formats, |
| Circular or Normal mode, Channel Priority level, Source and Destination Increment mode |
| using HAL_DMA_Init() function. |
| |
| Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX |
| thanks to: |
| (##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE() ; |
| (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE(); |
| |
| (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error |
| detection. |
| |
| (#) Use HAL_DMA_Abort() function to abort the current transfer |
| |
| -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. |
| |
| *** Polling mode IO operation *** |
| ================================= |
| [..] |
| (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source |
| address and destination address and the Length of data to be transferred |
| (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this |
| case a fixed Timeout can be configured by User depending from his application. |
| |
| *** Interrupt mode IO operation *** |
| =================================== |
| [..] |
| (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() |
| (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() |
| (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of |
| Source address and destination address and the Length of data to be transferred. |
| In this case the DMA interrupt is configured |
| (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine |
| (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can |
| add his own function to register callbacks with HAL_DMA_RegisterCallback(). |
| |
| *** DMA HAL driver macros list *** |
| ============================================= |
| [..] |
| Below the list of macros in DMA HAL driver. |
| |
| (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. |
| (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. |
| (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. |
| (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. |
| (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. |
| (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. |
| (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. |
| |
| [..] |
| (@) You can refer to the DMA HAL driver header file for more useful macros |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx_hal.h" |
| |
| /** @addtogroup STM32G4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup DMA DMA |
| * @brief DMA HAL module driver |
| * @{ |
| */ |
| |
| #ifdef HAL_DMA_MODULE_ENABLED |
| |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| /* Private macro -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private function prototypes -----------------------------------------------*/ |
| /** @defgroup DMA_Private_Functions DMA Private Functions |
| * @{ |
| */ |
| static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); |
| |
| static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); |
| static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions ---------------------------------------------------------*/ |
| |
| /** @defgroup DMA_Exported_Functions DMA Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @brief Initialization and de-initialization functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### Initialization and de-initialization functions ##### |
| =============================================================================== |
| [..] |
| This section provides functions allowing to initialize the DMA Channel source |
| and destination addresses, incrementation and data sizes, transfer direction, |
| circular/normal mode selection, memory-to-memory mode selection and Channel priority value. |
| [..] |
| The HAL_DMA_Init() function follows the DMA configuration procedures as described in |
| reference manual. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Initialize the DMA according to the specified |
| * parameters in the DMA_InitTypeDef and initialize the associated handle. |
| * @param hdma Pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) |
| { |
| uint32_t tmp; |
| |
| /* Check the DMA handle allocation */ |
| if (hdma == NULL) |
| { |
| return HAL_ERROR; |
| } |
| |
| /* Check the parameters */ |
| assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); |
| assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); |
| assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); |
| assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); |
| assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); |
| assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); |
| assert_param(IS_DMA_MODE(hdma->Init.Mode)); |
| assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); |
| |
| assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); |
| |
| /* Compute the channel index */ |
| if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) |
| { |
| /* DMA1 */ |
| hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; |
| hdma->DmaBaseAddress = DMA1; |
| } |
| else |
| { |
| /* DMA2 */ |
| hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; |
| hdma->DmaBaseAddress = DMA2; |
| } |
| |
| /* Change DMA peripheral state */ |
| hdma->State = HAL_DMA_STATE_BUSY; |
| |
| /* Get the CR register value */ |
| tmp = hdma->Instance->CCR; |
| |
| /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ |
| tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | |
| DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | |
| DMA_CCR_DIR | DMA_CCR_MEM2MEM)); |
| |
| /* Prepare the DMA Channel configuration */ |
| tmp |= hdma->Init.Direction | |
| hdma->Init.PeriphInc | hdma->Init.MemInc | |
| hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | |
| hdma->Init.Mode | hdma->Init.Priority; |
| |
| /* Write to DMA Channel CR register */ |
| hdma->Instance->CCR = tmp; |
| |
| /* Initialize parameters for DMAMUX channel : |
| DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask |
| */ |
| DMA_CalcDMAMUXChannelBaseAndMask(hdma); |
| |
| if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) |
| { |
| /* if memory to memory force the request to 0*/ |
| hdma->Init.Request = DMA_REQUEST_MEM2MEM; |
| } |
| |
| /* Set peripheral request to DMAMUX channel */ |
| hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); |
| |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) |
| { |
| /* Initialize parameters for DMAMUX request generator : |
| DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask |
| */ |
| DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); |
| |
| /* Reset the DMAMUX request generator register*/ |
| hdma->DMAmuxRequestGen->RGCR = 0U; |
| |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| } |
| else |
| { |
| hdma->DMAmuxRequestGen = 0U; |
| hdma->DMAmuxRequestGenStatus = 0U; |
| hdma->DMAmuxRequestGenStatusMask = 0U; |
| } |
| |
| /* Initialize the error code */ |
| hdma->ErrorCode = HAL_DMA_ERROR_NONE; |
| |
| /* Initialize the DMA state*/ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Allocate lock resource and initialize it */ |
| hdma->Lock = HAL_UNLOCKED; |
| |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief DeInitialize the DMA peripheral. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) |
| { |
| |
| /* Check the DMA handle allocation */ |
| if (NULL == hdma) |
| { |
| return HAL_ERROR; |
| } |
| |
| /* Check the parameters */ |
| assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); |
| |
| /* Disable the selected DMA Channelx */ |
| __HAL_DMA_DISABLE(hdma); |
| |
| /* Compute the channel index */ |
| if ((uint32_t)(hdma->Instance) < (uint32_t)(DMA2_Channel1)) |
| { |
| /* DMA1 */ |
| hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; |
| hdma->DmaBaseAddress = DMA1; |
| } |
| else |
| { |
| /* DMA2 */ |
| hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA2_Channel1) / ((uint32_t)DMA2_Channel2 - (uint32_t)DMA2_Channel1)) << 2; |
| hdma->DmaBaseAddress = DMA2; |
| } |
| |
| /* Reset DMA Channel control register */ |
| hdma->Instance->CCR = 0; |
| |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Initialize parameters for DMAMUX channel : |
| DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ |
| |
| DMA_CalcDMAMUXChannelBaseAndMask(hdma); |
| |
| /* Reset the DMAMUX channel that corresponds to the DMA channel */ |
| hdma->DMAmuxChannel->CCR = 0; |
| |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| /* Reset Request generator parameters if any */ |
| if (((hdma->Init.Request > 0U) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR3))) |
| { |
| /* Initialize parameters for DMAMUX request generator : |
| DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask |
| */ |
| DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); |
| |
| /* Reset the DMAMUX request generator register*/ |
| hdma->DMAmuxRequestGen->RGCR = 0U; |
| |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| } |
| |
| hdma->DMAmuxRequestGen = 0U; |
| hdma->DMAmuxRequestGenStatus = 0U; |
| hdma->DMAmuxRequestGenStatusMask = 0U; |
| |
| /* Clean callbacks */ |
| hdma->XferCpltCallback = NULL; |
| hdma->XferHalfCpltCallback = NULL; |
| hdma->XferErrorCallback = NULL; |
| hdma->XferAbortCallback = NULL; |
| |
| /* Initialize the error code */ |
| hdma->ErrorCode = HAL_DMA_ERROR_NONE; |
| |
| /* Initialize the DMA state */ |
| hdma->State = HAL_DMA_STATE_RESET; |
| |
| /* Release Lock */ |
| __HAL_UNLOCK(hdma); |
| |
| return HAL_OK; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions |
| * @brief Input and Output operation functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### IO operation functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to: |
| (+) Configure the source, destination address and data length and Start DMA transfer |
| (+) Configure the source, destination address and data length and |
| Start DMA transfer with interrupt |
| (+) Abort DMA transfer |
| (+) Poll for transfer complete |
| (+) Handle DMA interrupt request |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Start the DMA Transfer. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param SrcAddress The source memory Buffer address |
| * @param DstAddress The destination memory Buffer address |
| * @param DataLength The length of data to be transferred from source to destination (up to 256Kbytes-1) |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| /* Check the parameters */ |
| assert_param(IS_DMA_BUFFER_SIZE(DataLength)); |
| |
| /* Process locked */ |
| __HAL_LOCK(hdma); |
| |
| if (HAL_DMA_STATE_READY == hdma->State) |
| { |
| /* Change DMA peripheral state */ |
| hdma->State = HAL_DMA_STATE_BUSY; |
| hdma->ErrorCode = HAL_DMA_ERROR_NONE; |
| |
| /* Disable the peripheral */ |
| __HAL_DMA_DISABLE(hdma); |
| |
| /* Configure the source, destination address and the data length & clear flags*/ |
| DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); |
| |
| /* Enable the Peripheral */ |
| __HAL_DMA_ENABLE(hdma); |
| } |
| else |
| { |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| status = HAL_BUSY; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Start the DMA Transfer with interrupt enabled. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param SrcAddress The source memory Buffer address |
| * @param DstAddress The destination memory Buffer address |
| * @param DataLength The length of data to be transferred from source to destination (up to 256Kbytes-1) |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, |
| uint32_t DataLength) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| /* Check the parameters */ |
| assert_param(IS_DMA_BUFFER_SIZE(DataLength)); |
| |
| /* Process locked */ |
| __HAL_LOCK(hdma); |
| |
| if (HAL_DMA_STATE_READY == hdma->State) |
| { |
| /* Change DMA peripheral state */ |
| hdma->State = HAL_DMA_STATE_BUSY; |
| hdma->ErrorCode = HAL_DMA_ERROR_NONE; |
| |
| /* Disable the peripheral */ |
| __HAL_DMA_DISABLE(hdma); |
| |
| /* Configure the source, destination address and the data length & clear flags*/ |
| DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); |
| |
| /* Enable the transfer complete interrupt */ |
| /* Enable the transfer Error interrupt */ |
| if (NULL != hdma->XferHalfCpltCallback) |
| { |
| /* Enable the Half transfer complete interrupt as well */ |
| __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); |
| } |
| else |
| { |
| __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); |
| __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); |
| } |
| |
| /* Check if DMAMUX Synchronization is enabled*/ |
| if ((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) |
| { |
| /* Enable DMAMUX sync overrun IT*/ |
| hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; |
| } |
| |
| if (hdma->DMAmuxRequestGen != 0U) |
| { |
| /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ |
| /* enable the request gen overrun IT*/ |
| hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; |
| } |
| |
| /* Enable the Peripheral */ |
| __HAL_DMA_ENABLE(hdma); |
| } |
| else |
| { |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| /* Remain BUSY */ |
| status = HAL_BUSY; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Abort the DMA Transfer. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| if(hdma->State != HAL_DMA_STATE_BUSY) |
| { |
| /* no transfer ongoing */ |
| hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; |
| |
| status = HAL_ERROR; |
| } |
| else |
| { |
| /* Disable DMA IT */ |
| __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); |
| |
| /* disable the DMAMUX sync overrun IT*/ |
| hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; |
| |
| /* Disable the channel */ |
| __HAL_DMA_DISABLE(hdma); |
| |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| if (hdma->DMAmuxRequestGen != 0U) |
| { |
| /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ |
| /* disable the request gen overrun IT*/ |
| hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; |
| |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| } |
| } |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| return status; |
| } |
| |
| /** |
| * @brief Aborts the DMA Transfer in Interrupt mode. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| if (HAL_DMA_STATE_BUSY != hdma->State) |
| { |
| /* no transfer ongoing */ |
| hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| status = HAL_ERROR; |
| } |
| else |
| { |
| /* Disable DMA IT */ |
| __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); |
| |
| /* Disable the channel */ |
| __HAL_DMA_DISABLE(hdma); |
| |
| /* disable the DMAMUX sync overrun IT*/ |
| hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; |
| |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| if (hdma->DMAmuxRequestGen != 0U) |
| { |
| /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ |
| /* disable the request gen overrun IT*/ |
| hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; |
| |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| } |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| /* Call User Abort callback */ |
| if (hdma->XferAbortCallback != NULL) |
| { |
| hdma->XferAbortCallback(hdma); |
| } |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Polling for transfer complete. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param CompleteLevel Specifies the DMA level complete. |
| * @param Timeout Timeout duration. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, |
| uint32_t Timeout) |
| { |
| uint32_t temp; |
| uint32_t tickstart; |
| |
| if (HAL_DMA_STATE_BUSY != hdma->State) |
| { |
| /* no transfer ongoing */ |
| hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; |
| __HAL_UNLOCK(hdma); |
| return HAL_ERROR; |
| } |
| |
| /* Polling mode not supported in circular mode */ |
| if (0U != (hdma->Instance->CCR & DMA_CCR_CIRC)) |
| { |
| hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; |
| return HAL_ERROR; |
| } |
| |
| /* Get the level transfer complete flag */ |
| if (HAL_DMA_FULL_TRANSFER == CompleteLevel) |
| { |
| /* Transfer Complete flag */ |
| |
| temp = (uint32_t)DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1FU); |
| } |
| else |
| { |
| /* Half Transfer Complete flag */ |
| temp = (uint32_t)DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1FU); |
| } |
| |
| /* Get tick */ |
| tickstart = HAL_GetTick(); |
| |
| while (0U == (hdma->DmaBaseAddress->ISR & temp)) |
| { |
| if ((0U != (hdma->DmaBaseAddress->ISR & ((uint32_t)DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1FU))))) |
| { |
| /* When a DMA transfer error occurs */ |
| /* A hardware clear of its EN bits is performed */ |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Update error code */ |
| hdma->ErrorCode = HAL_DMA_ERROR_TE; |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| return HAL_ERROR; |
| } |
| /* Check for the Timeout */ |
| if (Timeout != HAL_MAX_DELAY) |
| { |
| if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) |
| { |
| /* Update error code */ |
| hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| return HAL_ERROR; |
| } |
| } |
| } |
| |
| /*Check for DMAMUX Request generator (if used) overrun status */ |
| if (hdma->DMAmuxRequestGen != 0U) |
| { |
| /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ |
| if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) |
| { |
| /* Disable the request gen overrun interrupt */ |
| hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; |
| |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| |
| /* Update error code */ |
| hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; |
| } |
| } |
| |
| /* Check for DMAMUX Synchronization overrun */ |
| if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) |
| { |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| /* Update error code */ |
| hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; |
| } |
| |
| if (HAL_DMA_FULL_TRANSFER == CompleteLevel) |
| { |
| /* Clear the transfer complete flag */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* The selected Channelx EN bit is cleared (DMA is disabled and |
| all transfers are complete) */ |
| hdma->State = HAL_DMA_STATE_READY; |
| } |
| else |
| { |
| /* Clear the half transfer complete flag */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1FU)); |
| } |
| |
| /* Process unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief Handle DMA interrupt request. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval None |
| */ |
| void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) |
| { |
| uint32_t flag_it = hdma->DmaBaseAddress->ISR; |
| uint32_t source_it = hdma->Instance->CCR; |
| |
| /* Half Transfer Complete Interrupt management ******************************/ |
| if ((0U != (flag_it & ((uint32_t)DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1FU)))) && (0U != (source_it & DMA_IT_HT))) |
| { |
| /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ |
| if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) |
| { |
| /* Disable the half transfer interrupt */ |
| __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); |
| } |
| /* Clear the half transfer complete flag */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* DMA peripheral state is not updated in Half Transfer */ |
| /* but in Transfer Complete case */ |
| |
| if (hdma->XferHalfCpltCallback != NULL) |
| { |
| /* Half transfer callback */ |
| hdma->XferHalfCpltCallback(hdma); |
| } |
| } |
| /* Transfer Complete Interrupt management ***********************************/ |
| else if ((0U != (flag_it & ((uint32_t)DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1FU)))) |
| && (0U != (source_it & DMA_IT_TC))) |
| { |
| if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) |
| { |
| /* Disable the transfer complete and error interrupt */ |
| __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| } |
| /* Clear the transfer complete flag */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| if (hdma->XferCpltCallback != NULL) |
| { |
| /* Transfer complete callback */ |
| hdma->XferCpltCallback(hdma); |
| } |
| } |
| /* Transfer Error Interrupt management **************************************/ |
| else if ((0U != (flag_it & ((uint32_t)DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x1FU)))) |
| && (0U != (source_it & DMA_IT_TE))) |
| { |
| /* When a DMA transfer error occurs */ |
| /* A hardware clear of its EN bits is performed */ |
| /* Disable ALL DMA IT */ |
| __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); |
| |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = ((uint32_t)DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Update error code */ |
| hdma->ErrorCode = HAL_DMA_ERROR_TE; |
| |
| /* Change the DMA state */ |
| hdma->State = HAL_DMA_STATE_READY; |
| |
| /* Process Unlocked */ |
| __HAL_UNLOCK(hdma); |
| |
| if (hdma->XferErrorCallback != NULL) |
| { |
| /* Transfer error callback */ |
| hdma->XferErrorCallback(hdma); |
| } |
| } |
| else |
| { |
| /* Nothing To Do */ |
| } |
| return; |
| } |
| |
| /** |
| * @brief Register callbacks |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param CallbackID User Callback identifer |
| * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. |
| * @param pCallback pointer to private callbacsk function which has pointer to |
| * a DMA_HandleTypeDef structure as parameter. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| /* Process locked */ |
| __HAL_LOCK(hdma); |
| |
| if (HAL_DMA_STATE_READY == hdma->State) |
| { |
| switch (CallbackID) |
| { |
| case HAL_DMA_XFER_CPLT_CB_ID: |
| hdma->XferCpltCallback = pCallback; |
| break; |
| |
| case HAL_DMA_XFER_HALFCPLT_CB_ID: |
| hdma->XferHalfCpltCallback = pCallback; |
| break; |
| |
| case HAL_DMA_XFER_ERROR_CB_ID: |
| hdma->XferErrorCallback = pCallback; |
| break; |
| |
| case HAL_DMA_XFER_ABORT_CB_ID: |
| hdma->XferAbortCallback = pCallback; |
| break; |
| |
| default: |
| status = HAL_ERROR; |
| break; |
| } |
| } |
| else |
| { |
| status = HAL_ERROR; |
| } |
| |
| /* Release Lock */ |
| __HAL_UNLOCK(hdma); |
| |
| return status; |
| } |
| |
| /** |
| * @brief UnRegister callbacks |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param CallbackID User Callback identifer |
| * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) |
| { |
| HAL_StatusTypeDef status = HAL_OK; |
| |
| /* Process locked */ |
| __HAL_LOCK(hdma); |
| |
| if (HAL_DMA_STATE_READY == hdma->State) |
| { |
| switch (CallbackID) |
| { |
| case HAL_DMA_XFER_CPLT_CB_ID: |
| hdma->XferCpltCallback = NULL; |
| break; |
| |
| case HAL_DMA_XFER_HALFCPLT_CB_ID: |
| hdma->XferHalfCpltCallback = NULL; |
| break; |
| |
| case HAL_DMA_XFER_ERROR_CB_ID: |
| hdma->XferErrorCallback = NULL; |
| break; |
| |
| case HAL_DMA_XFER_ABORT_CB_ID: |
| hdma->XferAbortCallback = NULL; |
| break; |
| |
| case HAL_DMA_XFER_ALL_CB_ID: |
| hdma->XferCpltCallback = NULL; |
| hdma->XferHalfCpltCallback = NULL; |
| hdma->XferErrorCallback = NULL; |
| hdma->XferAbortCallback = NULL; |
| break; |
| |
| default: |
| status = HAL_ERROR; |
| break; |
| } |
| } |
| else |
| { |
| status = HAL_ERROR; |
| } |
| |
| /* Release Lock */ |
| __HAL_UNLOCK(hdma); |
| |
| return status; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| |
| /** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions |
| * @brief Peripheral State and Errors functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### Peripheral State and Errors functions ##### |
| =============================================================================== |
| [..] |
| This subsection provides functions allowing to |
| (+) Check the DMA state |
| (+) Get error code |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Return the DMA hande state. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval HAL state |
| */ |
| HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) |
| { |
| /* Return DMA handle state */ |
| return hdma->State; |
| } |
| |
| /** |
| * @brief Return the DMA error code. |
| * @param hdma : pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval DMA Error Code |
| */ |
| uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) |
| { |
| return hdma->ErrorCode; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup DMA_Private_Functions |
| * @{ |
| */ |
| |
| /** |
| * @brief Sets the DMA Transfer parameter. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @param SrcAddress The source memory Buffer address |
| * @param DstAddress The destination memory Buffer address |
| * @param DataLength The length of data to be transferred from source to destination |
| * @retval HAL status |
| */ |
| static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) |
| { |
| /* Clear the DMAMUX synchro overrun flag */ |
| hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; |
| |
| if (hdma->DMAmuxRequestGen != 0U) |
| { |
| /* Clear the DMAMUX request generator overrun flag */ |
| hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; |
| } |
| |
| /* Clear all flags */ |
| hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1FU)); |
| |
| /* Configure DMA Channel data length */ |
| hdma->Instance->CNDTR = DataLength; |
| |
| /* Memory to Peripheral */ |
| if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) |
| { |
| /* Configure DMA Channel destination address */ |
| hdma->Instance->CPAR = DstAddress; |
| |
| /* Configure DMA Channel source address */ |
| hdma->Instance->CMAR = SrcAddress; |
| } |
| /* Peripheral to Memory */ |
| else |
| { |
| /* Configure DMA Channel source address */ |
| hdma->Instance->CPAR = SrcAddress; |
| |
| /* Configure DMA Channel destination address */ |
| hdma->Instance->CMAR = DstAddress; |
| } |
| } |
| |
| /** |
| * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on stream number |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Stream. |
| * @retval None |
| */ |
| static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) |
| { |
| uint32_t dmamux_base_addr; |
| uint32_t channel_number; |
| DMAMUX_Channel_TypeDef *DMAMUX1_ChannelBase; |
| |
| /* check if instance is not outside the DMA channel range */ |
| if ((uint32_t)hdma->Instance < (uint32_t)DMA2_Channel1) |
| { |
| /* DMA1 */ |
| DMAMUX1_ChannelBase = DMAMUX1_Channel0; |
| } |
| else |
| { |
| /* DMA2 */ |
| #if defined (STM32G471xx) || defined (STM32G473xx) || defined (STM32G474xx) || defined (STM32G483xx) || defined (STM32G484xx) |
| DMAMUX1_ChannelBase = DMAMUX1_Channel8; |
| #elif defined (STM32G431xx) || defined (STM32G441xx) || defined (STM32GBK1CB) |
| DMAMUX1_ChannelBase = DMAMUX1_Channel6; |
| #else |
| DMAMUX1_ChannelBase = DMAMUX1_Channel7; |
| #endif /* STM32G4x1xx) */ |
| } |
| dmamux_base_addr = (uint32_t)DMAMUX1_ChannelBase; |
| channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U; |
| hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)(uint32_t)(dmamux_base_addr + ((hdma->ChannelIndex >> 2U) * ((uint32_t)DMAMUX1_Channel1 - (uint32_t)DMAMUX1_Channel0))); |
| hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; |
| hdma->DMAmuxChannelStatusMask = 1UL << (channel_number & 0x1FU); |
| } |
| |
| /** |
| * @brief Updates the DMA handle with the DMAMUX request generator params |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA Channel. |
| * @retval None |
| */ |
| |
| static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) |
| { |
| uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; |
| |
| /* DMA Channels are connected to DMAMUX1 request generator blocks*/ |
| hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); |
| |
| hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; |
| |
| hdma->DMAmuxRequestGenStatusMask = 1UL << ((request - 1U) & 0x1FU); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* HAL_DMA_MODULE_ENABLED */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |