| /** |
| ****************************************************************************** |
| * @file stm32g4xx_hal_def.h |
| * @author MCD Application Team |
| * @brief This file contains HAL common defines, enumeration, macros and |
| * structures definitions. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2018 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32G4xx_HAL_DEF |
| #define __STM32G4xx_HAL_DEF |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx.h" |
| #include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ |
| #include <stddef.h> |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /** |
| * @brief HAL Status structures definition |
| */ |
| typedef enum |
| { |
| HAL_OK = 0x00U, |
| HAL_ERROR = 0x01U, |
| HAL_BUSY = 0x02U, |
| HAL_TIMEOUT = 0x03U |
| } HAL_StatusTypeDef; |
| |
| /** |
| * @brief HAL Lock structures definition |
| */ |
| typedef enum |
| { |
| HAL_UNLOCKED = 0x00U, |
| HAL_LOCKED = 0x01U |
| } HAL_LockTypeDef; |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| |
| #define HAL_MAX_DELAY 0xFFFFFFFFU |
| |
| #define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) |
| #define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) |
| |
| #define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ |
| do{ \ |
| (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ |
| (__DMA_HANDLE__).Parent = (__HANDLE__); \ |
| } while(0) |
| |
| #define UNUSED(X) (void)X |
| |
| /** @brief Reset the Handle's State field. |
| * @param __HANDLE__: specifies the Peripheral Handle. |
| * @note This macro can be used for the following purpose: |
| * - When the Handle is declared as local variable; before passing it as parameter |
| * to HAL_PPP_Init() for the first time, it is mandatory to use this macro |
| * to set to 0 the Handle's "State" field. |
| * Otherwise, "State" field may have any random value and the first time the function |
| * HAL_PPP_Init() is called, the low level hardware initialization will be missed |
| * (i.e. HAL_PPP_MspInit() will not be executed). |
| * - When there is a need to reconfigure the low level hardware: instead of calling |
| * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). |
| * In this later function, when the Handle's "State" field is set to 0, it will execute the function |
| * HAL_PPP_MspInit() which will reconfigure the low level hardware. |
| * @retval None |
| */ |
| #define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) |
| |
| #if (USE_RTOS == 1U) |
| /* Reserved for future use */ |
| #error " USE_RTOS should be 0 in the current HAL release " |
| #else |
| #define __HAL_LOCK(__HANDLE__) \ |
| do{ \ |
| if((__HANDLE__)->Lock == HAL_LOCKED) \ |
| { \ |
| return HAL_BUSY; \ |
| } \ |
| else \ |
| { \ |
| (__HANDLE__)->Lock = HAL_LOCKED; \ |
| } \ |
| }while (0U) |
| |
| #define __HAL_UNLOCK(__HANDLE__) \ |
| do{ \ |
| (__HANDLE__)->Lock = HAL_UNLOCKED; \ |
| }while (0U) |
| #endif /* USE_RTOS */ |
| |
| #if defined ( __GNUC__ ) |
| #ifndef __weak |
| #define __weak __attribute__((weak)) |
| #endif /* __weak */ |
| #ifndef __packed |
| #define __packed __attribute__((__packed__)) |
| #endif /* __packed */ |
| #endif /* __GNUC__ */ |
| |
| |
| /* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ |
| #if defined (__GNUC__) /* GNU Compiler */ |
| #ifndef __ALIGN_END |
| #define __ALIGN_END __attribute__ ((aligned (4U))) |
| #endif /* __ALIGN_END */ |
| #ifndef __ALIGN_BEGIN |
| #define __ALIGN_BEGIN |
| #endif /* __ALIGN_BEGIN */ |
| #else |
| #ifndef __ALIGN_END |
| #define __ALIGN_END |
| #endif /* __ALIGN_END */ |
| #ifndef __ALIGN_BEGIN |
| #if defined (__CC_ARM) /* ARM Compiler */ |
| #define __ALIGN_BEGIN __align(4U) |
| #elif defined (__ICCARM__) /* IAR Compiler */ |
| #define __ALIGN_BEGIN |
| #endif /* __CC_ARM */ |
| #endif /* __ALIGN_BEGIN */ |
| #endif /* __GNUC__ */ |
| |
| /** |
| * @brief __RAM_FUNC definition |
| */ |
| #if defined ( __CC_ARM ) |
| /* ARM Compiler |
| ------------ |
| RAM functions are defined using the toolchain options. |
| Functions that are executed in RAM should reside in a separate source module. |
| Using the 'Options for File' dialog you can simply change the 'Code / Const' |
| area of a module to a memory space in physical RAM. |
| Available memory areas are declared in the 'Target' tab of the 'Options for Target' |
| dialog. |
| */ |
| #define __RAM_FUNC |
| |
| #elif defined ( __ICCARM__ ) |
| /* ICCARM Compiler |
| --------------- |
| RAM functions are defined using a specific toolchain keyword "__ramfunc". |
| */ |
| #define __RAM_FUNC __ramfunc |
| |
| #elif defined ( __GNUC__ ) |
| /* GNU Compiler |
| ------------ |
| RAM functions are defined using a specific toolchain attribute |
| "__attribute__((section(".RamFunc")))". |
| */ |
| #define __RAM_FUNC __attribute__((section(".RamFunc"))) |
| |
| #endif /* __CC_ARM */ |
| |
| /** |
| * @brief __NOINLINE definition |
| */ |
| #if defined ( __CC_ARM ) || defined ( __GNUC__ ) |
| /* ARM & GNUCompiler |
| ---------------- |
| */ |
| #define __NOINLINE __attribute__ ( (noinline) ) |
| |
| #elif defined ( __ICCARM__ ) |
| /* ICCARM Compiler |
| --------------- |
| */ |
| #define __NOINLINE _Pragma("optimize = no_inline") |
| |
| #endif /* __CC_ARM || __GNUC__ */ |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* ___STM32G4xx_HAL_DEF */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |