| /** |
| ****************************************************************************** |
| * @file stm32g4xx_ll_lptim.c |
| * @author MCD Application Team |
| * @brief LPTIM LL module driver. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * ****************************************************************************** |
| */ |
| #if defined(USE_FULL_LL_DRIVER) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32g4xx_ll_lptim.h" |
| #include "stm32g4xx_ll_bus.h" |
| #include "stm32g4xx_ll_rcc.h" |
| |
| |
| #ifdef USE_FULL_ASSERT |
| #include "stm32_assert.h" |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif |
| |
| /** @addtogroup STM32G4xx_LL_Driver |
| * @{ |
| */ |
| |
| |
| |
| /** @addtogroup LPTIM_LL |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @addtogroup LPTIM_LL_Private_Macros |
| * @{ |
| */ |
| #define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \ |
| || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL)) |
| |
| #define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \ |
| || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128)) |
| |
| #define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \ |
| || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE)) |
| |
| #define IS_LL_LPTIM_OUTPUT_POLARITY(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_REGULAR) \ |
| || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE)) |
| /** |
| * @} |
| */ |
| |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup LPTIM_Private_Functions LPTIM Private Functions |
| * @{ |
| */ |
| /** |
| * @} |
| */ |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup LPTIM_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup LPTIM_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief Set LPTIMx registers to their reset values. |
| * @param LPTIMx LP Timer instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: LPTIMx registers are de-initialized |
| * - ERROR: invalid LPTIMx instance |
| */ |
| ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx) |
| { |
| ErrorStatus result = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_LPTIM_INSTANCE(LPTIMx)); |
| |
| if (LPTIMx == LPTIM1) |
| { |
| LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPTIM1); |
| LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPTIM1); |
| } |
| else |
| { |
| result = ERROR; |
| } |
| |
| return result; |
| } |
| |
| /** |
| * @brief Set each fields of the LPTIM_InitStruct structure to its default |
| * value. |
| * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure |
| * @retval None |
| */ |
| void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct) |
| { |
| /* Set the default configuration */ |
| LPTIM_InitStruct->ClockSource = LL_LPTIM_CLK_SOURCE_INTERNAL; |
| LPTIM_InitStruct->Prescaler = LL_LPTIM_PRESCALER_DIV1; |
| LPTIM_InitStruct->Waveform = LL_LPTIM_OUTPUT_WAVEFORM_PWM; |
| LPTIM_InitStruct->Polarity = LL_LPTIM_OUTPUT_POLARITY_REGULAR; |
| } |
| |
| /** |
| * @brief Configure the LPTIMx peripheral according to the specified parameters. |
| * @note LL_LPTIM_Init can only be called when the LPTIM instance is disabled. |
| * @note LPTIMx can be disabled using unitary function @ref LL_LPTIM_Disable(). |
| * @param LPTIMx LP Timer Instance |
| * @param LPTIM_InitStruct pointer to a @ref LL_LPTIM_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: LPTIMx instance has been initialized |
| * - ERROR: LPTIMx instance hasn't been initialized |
| */ |
| ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct) |
| { |
| ErrorStatus result = SUCCESS; |
| /* Check the parameters */ |
| assert_param(IS_LPTIM_INSTANCE(LPTIMx)); |
| assert_param(IS_LL_LPTIM_CLOCK_SOURCE(LPTIM_InitStruct->ClockSource)); |
| assert_param(IS_LL_LPTIM_CLOCK_PRESCALER(LPTIM_InitStruct->Prescaler)); |
| assert_param(IS_LL_LPTIM_WAVEFORM(LPTIM_InitStruct->Waveform)); |
| assert_param(IS_LL_LPTIM_OUTPUT_POLARITY(LPTIM_InitStruct->Polarity)); |
| |
| /* The LPTIMx_CFGR register must only be modified when the LPTIM is disabled |
| (ENABLE bit is reset to 0). |
| */ |
| if (LL_LPTIM_IsEnabled(LPTIMx) == 1UL) |
| { |
| result = ERROR; |
| } |
| else |
| { |
| /* Set CKSEL bitfield according to ClockSource value */ |
| /* Set PRESC bitfield according to Prescaler value */ |
| /* Set WAVE bitfield according to Waveform value */ |
| /* Set WAVEPOL bitfield according to Polarity value */ |
| MODIFY_REG(LPTIMx->CFGR, |
| (LPTIM_CFGR_CKSEL | LPTIM_CFGR_PRESC | LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL), |
| LPTIM_InitStruct->ClockSource | \ |
| LPTIM_InitStruct->Prescaler | \ |
| LPTIM_InitStruct->Waveform | \ |
| LPTIM_InitStruct->Polarity); |
| } |
| |
| return result; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Disable the LPTIM instance |
| * @rmtoll CR ENABLE LL_LPTIM_Disable |
| * @param LPTIMx Low-Power Timer instance |
| * @note The following sequence is required to solve LPTIM disable HW limitation. |
| * Please check Errata Sheet ES0335 for more details under "MCU may remain |
| * stuck in LPTIM interrupt when entering Stop mode" section. |
| * @retval None |
| */ |
| void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx) |
| { |
| LL_RCC_ClocksTypeDef rcc_clock; |
| uint32_t tmpclksource = 0; |
| uint32_t tmpIER; |
| uint32_t tmpCFGR; |
| uint32_t tmpCMP; |
| uint32_t tmpARR; |
| uint32_t tmpOR; |
| |
| /* Check the parameters */ |
| assert_param(IS_LPTIM_INSTANCE(LPTIMx)); |
| |
| __disable_irq(); |
| |
| /********** Save LPTIM Config *********/ |
| /* Save LPTIM source clock */ |
| switch ((uint32_t)LPTIMx) |
| { |
| case LPTIM1_BASE: |
| tmpclksource = LL_RCC_GetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE); |
| break; |
| default: |
| break; |
| } |
| |
| /* Save LPTIM configuration registers */ |
| tmpIER = LPTIMx->IER; |
| tmpCFGR = LPTIMx->CFGR; |
| tmpCMP = LPTIMx->CMP; |
| tmpARR = LPTIMx->ARR; |
| tmpOR = LPTIMx->OR; |
| |
| /************* Reset LPTIM ************/ |
| (void)LL_LPTIM_DeInit(LPTIMx); |
| |
| /********* Restore LPTIM Config *******/ |
| LL_RCC_GetSystemClocksFreq(&rcc_clock); |
| |
| if ((tmpCMP != 0UL) || (tmpARR != 0UL)) |
| { |
| /* Force LPTIM source kernel clock from APB */ |
| switch ((uint32_t)LPTIMx) |
| { |
| case LPTIM1_BASE: |
| LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM1_CLKSOURCE_PCLK1); |
| break; |
| default: |
| break; |
| } |
| |
| if (tmpCMP != 0UL) |
| { |
| /* Restore CMP and ARR registers (LPTIM should be enabled first) */ |
| LPTIMx->CR |= LPTIM_CR_ENABLE; |
| LPTIMx->CMP = tmpCMP; |
| |
| /* Polling on CMP write ok status after above restore operation */ |
| do |
| { |
| rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ |
| } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); |
| |
| LL_LPTIM_ClearFlag_CMPOK(LPTIMx); |
| } |
| |
| if (tmpARR != 0UL) |
| { |
| LPTIMx->CR |= LPTIM_CR_ENABLE; |
| LPTIMx->ARR = tmpARR; |
| |
| LL_RCC_GetSystemClocksFreq(&rcc_clock); |
| /* Polling on ARR write ok status after above restore operation */ |
| do |
| { |
| rcc_clock.SYSCLK_Frequency--; /* Used for timeout */ |
| } while (((LL_LPTIM_IsActiveFlag_ARROK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL)); |
| |
| LL_LPTIM_ClearFlag_ARROK(LPTIMx); |
| } |
| |
| /* Restore LPTIM source kernel clock */ |
| LL_RCC_SetLPTIMClockSource(tmpclksource); |
| } |
| |
| /* Restore configuration registers (LPTIM should be disabled first) */ |
| LPTIMx->CR &= ~(LPTIM_CR_ENABLE); |
| LPTIMx->IER = tmpIER; |
| LPTIMx->CFGR = tmpCFGR; |
| LPTIMx->OR = tmpOR; |
| |
| __enable_irq(); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |