blob: 7a7ea709a3e65802f8d7d44cf0d92c7a605fd6d7 [file] [log] [blame]
/**
******************************************************************************
* @file stm32g4xx_hal_dma_ex.c
* @author MCD Application Team
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The DMA Extension HAL driver can be used as follows:
(+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
(+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from
the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler.
As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMAEx_MUX_IRQHandler should be
called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project
(exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator)
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g4xx_hal.h"
/** @addtogroup STM32G4xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx DMAEx
* @brief DMA Extended HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private Constants ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
* @{
*/
/** @defgroup DMAEx_Exported_Functions_Group1 DMAEx Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the DMAMUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function.
(+) Configure the DMAMUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function.
Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used
to respectively enable/disable the request generator.
@endverbatim
* @{
*/
/**
* @brief Configure the DMAMUX synchronization parameters for a given DMA channel (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID));
assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig-> SyncPolarity));
assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable));
assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable));
assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber));
/*Check if the DMA state is ready */
if (hdma->State == HAL_DMA_STATE_READY)
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Set the new synchronization parameters (and keep the request ID filled during the Init)*/
MODIFY_REG(hdma->DMAmuxChannel->CCR, \
(~DMAMUX_CxCR_DMAREQ_ID), \
((pSyncConfig->SyncSignalID) << DMAMUX_CxCR_SYNC_ID_Pos) | ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \
pSyncConfig->SyncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \
((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos));
/* Process UnLocked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
/*DMA State not Ready*/
return HAL_ERROR;
}
}
/**
* @brief Configure the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef :
* contains the request generator parameters.
*
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator(DMA_HandleTypeDef *hdma,
HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
assert_param(IS_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID));
assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity));
assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if ((hdma->State == HAL_DMA_STATE_READY) && (hdma->DMAmuxRequestGen != 0U))
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Set the request generator new parameters */
hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \
((pRequestGeneratorConfig->RequestNumber - 1U) << (POSITION_VAL(DMAMUX_RGxCR_GNBREQ) & 0x1FU)) | \
pRequestGeneratorConfig->Polarity;
/* Process UnLocked */
__HAL_UNLOCK(hdma);
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Enable the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
{
/* Enable the request generator*/
hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Disable the DMAMUX request generator block used by the given DMA channel (instance).
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator(DMA_HandleTypeDef *hdma)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
/* check if the DMA state is ready
and DMA is using a DMAMUX request generator block
*/
if ((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0))
{
/* Disable the request generator*/
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE;
return HAL_OK;
}
else
{
return HAL_ERROR;
}
}
/**
* @brief Handles DMAMUX interrupt request.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA channel.
* @retval None
*/
void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma)
{
/* Check for DMAMUX Synchronization overrun */
if ((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U)
{
/* Disable the synchro overrun interrupt */
hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE;
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_SYNC;
if (hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
if (hdma->DMAmuxRequestGen != 0)
{
/* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */
if ((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U)
{
/* Disable the request gen overrun interrupt */
hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE;
/* Clear the DMAMUX request generator overrun flag */
hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask;
/* Update error code */
hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN;
if (hdma->XferErrorCallback != NULL)
{
/* Transfer error callback */
hdma->XferErrorCallback(hdma);
}
}
}
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/