| /** |
| ****************************************************************************** |
| * @file stm32h7xx_hal_conf_template.h |
| * @author MCD Application Team |
| * @brief HAL configuration template file. |
| * This file should be copied to the application folder and renamed |
| * to stm32h7xx_hal_conf.h. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_HAL_CONF_H |
| #define STM32H7xx_HAL_CONF_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /* ########################## Module Selection ############################## */ |
| /** |
| * @brief This is the list of modules to be used in the HAL driver |
| */ |
| #define HAL_MODULE_ENABLED |
| #define HAL_ADC_MODULE_ENABLED |
| #define HAL_CEC_MODULE_ENABLED |
| #define HAL_COMP_MODULE_ENABLED |
| #define HAL_CORDIC_MODULE_ENABLED |
| #define HAL_CORTEX_MODULE_ENABLED |
| #define HAL_CRC_MODULE_ENABLED |
| #define HAL_CRYP_MODULE_ENABLED |
| #define HAL_DAC_MODULE_ENABLED |
| #define HAL_DCMI_MODULE_ENABLED |
| #define HAL_DFSDM_MODULE_ENABLED |
| #define HAL_DMA_MODULE_ENABLED |
| #define HAL_DMA2D_MODULE_ENABLED |
| #define HAL_DTS_MODULE_ENABLED |
| #define HAL_DSI_MODULE_ENABLED |
| #define HAL_ETH_MODULE_ENABLED |
| #define HAL_EXTI_MODULE_ENABLED |
| #define HAL_FDCAN_MODULE_ENABLED |
| #define HAL_FLASH_MODULE_ENABLED |
| #define HAL_GFXMMU_MODULE_ENABLED |
| #define HAL_FMAC_MODULE_ENABLED |
| #define HAL_GPIO_MODULE_ENABLED |
| #define HAL_HASH_MODULE_ENABLED |
| #define HAL_HCD_MODULE_ENABLED |
| #define HAL_HRTIM_MODULE_ENABLED |
| #define HAL_HSEM_MODULE_ENABLED |
| #define HAL_I2C_MODULE_ENABLED |
| #define HAL_I2S_MODULE_ENABLED |
| #define HAL_IRDA_MODULE_ENABLED |
| #define HAL_IWDG_MODULE_ENABLED |
| #define HAL_JPEG_MODULE_ENABLED |
| #define HAL_LPTIM_MODULE_ENABLED |
| #define HAL_LTDC_MODULE_ENABLED |
| #define HAL_MDIOS_MODULE_ENABLED |
| #define HAL_MDMA_MODULE_ENABLED |
| #define HAL_MMC_MODULE_ENABLED |
| #define HAL_NAND_MODULE_ENABLED |
| #define HAL_NOR_MODULE_ENABLED |
| #define HAL_OPAMP_MODULE_ENABLED |
| #define HAL_OSPI_MODULE_ENABLED |
| #define HAL_OTFDEC_MODULE_ENABLED |
| #define HAL_PCD_MODULE_ENABLED |
| #define HAL_PWR_MODULE_ENABLED |
| #define HAL_PSSI_MODULE_ENABLED |
| #define HAL_QSPI_MODULE_ENABLED |
| #define HAL_RAMECC_MODULE_ENABLED |
| #define HAL_RCC_MODULE_ENABLED |
| #define HAL_RNG_MODULE_ENABLED |
| #define HAL_RTC_MODULE_ENABLED |
| #define HAL_SAI_MODULE_ENABLED |
| #define HAL_SD_MODULE_ENABLED |
| #define HAL_SDRAM_MODULE_ENABLED |
| #define HAL_SMARTCARD_MODULE_ENABLED |
| #define HAL_SMBUS_MODULE_ENABLED |
| #define HAL_SPDIFRX_MODULE_ENABLED |
| #define HAL_SPI_MODULE_ENABLED |
| #define HAL_SRAM_MODULE_ENABLED |
| #define HAL_SWPMI_MODULE_ENABLED |
| #define HAL_TIM_MODULE_ENABLED |
| #define HAL_UART_MODULE_ENABLED |
| #define HAL_USART_MODULE_ENABLED |
| #define HAL_WWDG_MODULE_ENABLED |
| |
| /* ########################## Oscillator Values adaptation ####################*/ |
| /** |
| * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
| * This value is used by the RCC HAL module to compute the system frequency |
| * (when HSE is used as system clock source, directly or through the PLL). |
| */ |
| #if !defined (HSE_VALUE) |
| #define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz */ |
| #endif /* HSE_VALUE */ |
| |
| #if !defined (HSE_STARTUP_TIMEOUT) |
| #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ |
| #endif /* HSE_STARTUP_TIMEOUT */ |
| |
| /** |
| * @brief Internal oscillator (CSI) default value. |
| * This value is the default CSI value after Reset. |
| */ |
| #if !defined (CSI_VALUE) |
| #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ |
| #endif /* CSI_VALUE */ |
| |
| /** |
| * @brief Internal High Speed oscillator (HSI) value. |
| * This value is used by the RCC HAL module to compute the system frequency |
| * (when HSI is used as system clock source, directly or through the PLL). |
| */ |
| #if !defined (HSI_VALUE) |
| #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ |
| #endif /* HSI_VALUE */ |
| |
| /** |
| * @brief External Low Speed oscillator (LSE) value. |
| * This value is used by the UART, RTC HAL module to compute the system frequency |
| */ |
| #if !defined (LSE_VALUE) |
| #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ |
| #endif /* LSE_VALUE */ |
| |
| |
| #if !defined (LSE_STARTUP_TIMEOUT) |
| #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ |
| #endif /* LSE_STARTUP_TIMEOUT */ |
| |
| #if !defined (LSI_VALUE) |
| #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ |
| #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
| The real value may vary depending on the variations |
| in voltage and temperature.*/ |
| |
| /** |
| * @brief External clock source for I2S peripheral |
| * This value is used by the I2S HAL module to compute the I2S clock source |
| * frequency, this source is inserted directly through I2S_CKIN pad. |
| */ |
| #if !defined (EXTERNAL_CLOCK_VALUE) |
| #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ |
| #endif /* EXTERNAL_CLOCK_VALUE */ |
| |
| /* Tip: To avoid modifying this file each time you need to use different HSE, |
| === you can define the HSE value in your toolchain compiler preprocessor. */ |
| |
| /* ########################### System Configuration ######################### */ |
| /** |
| * @brief This is the HAL system configuration section |
| */ |
| #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ |
| #define TICK_INT_PRIORITY (0x0FUL) /*!< tick interrupt priority */ |
| #define USE_RTOS 0 |
| #define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ |
| #define USE_SPI_CRC 1U /*!< use CRC in SPI */ |
| |
| #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
| #define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
| #define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ |
| #define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ |
| #define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
| #define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
| #define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
| #define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
| #define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
| #define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
| #define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ |
| #define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
| #define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ |
| #define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ |
| #define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
| #define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
| #define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
| #define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
| #define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
| #define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
| #define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ |
| #define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ |
| #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
| #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
| #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
| #define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ |
| #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
| #define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
| #define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
| #define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
| #define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ |
| #define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ |
| #define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ |
| #define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
| #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
| #define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
| #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
| #define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
| #define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
| #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
| #define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
| #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
| #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
| #define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ |
| #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
| #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
| #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
| #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
| |
| /* ########################### Ethernet Configuration ######################### */ |
| #define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ |
| #define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ |
| |
| #define ETH_MAC_ADDR0 (0x02UL) |
| #define ETH_MAC_ADDR1 (0x00UL) |
| #define ETH_MAC_ADDR2 (0x00UL) |
| #define ETH_MAC_ADDR3 (0x00UL) |
| #define ETH_MAC_ADDR4 (0x00UL) |
| #define ETH_MAC_ADDR5 (0x00UL) |
| |
| /* ########################## Assert Selection ############################## */ |
| /** |
| * @brief Uncomment the line below to expanse the "assert_param" macro in the |
| * HAL drivers code |
| */ |
| /* #define USE_FULL_ASSERT 1 */ |
| |
| |
| /* Includes ------------------------------------------------------------------*/ |
| /** |
| * @brief Include module's header file |
| */ |
| |
| #ifdef HAL_RCC_MODULE_ENABLED |
| #include "stm32h7xx_hal_rcc.h" |
| #endif /* HAL_RCC_MODULE_ENABLED */ |
| |
| #ifdef HAL_GPIO_MODULE_ENABLED |
| #include "stm32h7xx_hal_gpio.h" |
| #endif /* HAL_GPIO_MODULE_ENABLED */ |
| |
| #ifdef HAL_DMA_MODULE_ENABLED |
| #include "stm32h7xx_hal_dma.h" |
| #endif /* HAL_DMA_MODULE_ENABLED */ |
| |
| #ifdef HAL_MDMA_MODULE_ENABLED |
| #include "stm32h7xx_hal_mdma.h" |
| #endif /* HAL_MDMA_MODULE_ENABLED */ |
| |
| #ifdef HAL_HASH_MODULE_ENABLED |
| #include "stm32h7xx_hal_hash.h" |
| #endif /* HAL_HASH_MODULE_ENABLED */ |
| |
| #ifdef HAL_DCMI_MODULE_ENABLED |
| #include "stm32h7xx_hal_dcmi.h" |
| #endif /* HAL_DCMI_MODULE_ENABLED */ |
| |
| #ifdef HAL_DMA2D_MODULE_ENABLED |
| #include "stm32h7xx_hal_dma2d.h" |
| #endif /* HAL_DMA2D_MODULE_ENABLED */ |
| |
| #ifdef HAL_DSI_MODULE_ENABLED |
| #include "stm32h7xx_hal_dsi.h" |
| #endif /* HAL_DSI_MODULE_ENABLED */ |
| |
| #ifdef HAL_DFSDM_MODULE_ENABLED |
| #include "stm32h7xx_hal_dfsdm.h" |
| #endif /* HAL_DFSDM_MODULE_ENABLED */ |
| |
| #ifdef HAL_DTS_MODULE_ENABLED |
| #include "stm32h7xx_hal_dts.h" |
| #endif /* HAL_DTS_MODULE_ENABLED */ |
| |
| #ifdef HAL_ETH_MODULE_ENABLED |
| #include "stm32h7xx_hal_eth.h" |
| #endif /* HAL_ETH_MODULE_ENABLED */ |
| |
| #ifdef HAL_EXTI_MODULE_ENABLED |
| #include "stm32h7xx_hal_exti.h" |
| #endif /* HAL_EXTI_MODULE_ENABLED */ |
| |
| #ifdef HAL_CORTEX_MODULE_ENABLED |
| #include "stm32h7xx_hal_cortex.h" |
| #endif /* HAL_CORTEX_MODULE_ENABLED */ |
| |
| #ifdef HAL_ADC_MODULE_ENABLED |
| #include "stm32h7xx_hal_adc.h" |
| #endif /* HAL_ADC_MODULE_ENABLED */ |
| |
| #ifdef HAL_FDCAN_MODULE_ENABLED |
| #include "stm32h7xx_hal_fdcan.h" |
| #endif /* HAL_FDCAN_MODULE_ENABLED */ |
| |
| #ifdef HAL_CEC_MODULE_ENABLED |
| #include "stm32h7xx_hal_cec.h" |
| #endif /* HAL_CEC_MODULE_ENABLED */ |
| |
| #ifdef HAL_COMP_MODULE_ENABLED |
| #include "stm32h7xx_hal_comp.h" |
| #endif /* HAL_COMP_MODULE_ENABLED */ |
| |
| #ifdef HAL_CORDIC_MODULE_ENABLED |
| #include "stm32h7xx_hal_cordic.h" |
| #endif /* HAL_CORDIC_MODULE_ENABLED */ |
| |
| #ifdef HAL_CRC_MODULE_ENABLED |
| #include "stm32h7xx_hal_crc.h" |
| #endif /* HAL_CRC_MODULE_ENABLED */ |
| |
| #ifdef HAL_CRYP_MODULE_ENABLED |
| #include "stm32h7xx_hal_cryp.h" |
| #endif /* HAL_CRYP_MODULE_ENABLED */ |
| |
| #ifdef HAL_DAC_MODULE_ENABLED |
| #include "stm32h7xx_hal_dac.h" |
| #endif /* HAL_DAC_MODULE_ENABLED */ |
| |
| #ifdef HAL_FLASH_MODULE_ENABLED |
| #include "stm32h7xx_hal_flash.h" |
| #endif /* HAL_FLASH_MODULE_ENABLED */ |
| |
| #ifdef HAL_GFXMMU_MODULE_ENABLED |
| #include "stm32h7xx_hal_gfxmmu.h" |
| #endif /* HAL_GFXMMU_MODULE_ENABLED */ |
| |
| #ifdef HAL_FMAC_MODULE_ENABLED |
| #include "stm32h7xx_hal_fmac.h" |
| #endif /* HAL_FMAC_MODULE_ENABLED */ |
| |
| #ifdef HAL_HRTIM_MODULE_ENABLED |
| #include "stm32h7xx_hal_hrtim.h" |
| #endif /* HAL_HRTIM_MODULE_ENABLED */ |
| |
| #ifdef HAL_HSEM_MODULE_ENABLED |
| #include "stm32h7xx_hal_hsem.h" |
| #endif /* HAL_HSEM_MODULE_ENABLED */ |
| |
| #ifdef HAL_SRAM_MODULE_ENABLED |
| #include "stm32h7xx_hal_sram.h" |
| #endif /* HAL_SRAM_MODULE_ENABLED */ |
| |
| #ifdef HAL_NOR_MODULE_ENABLED |
| #include "stm32h7xx_hal_nor.h" |
| #endif /* HAL_NOR_MODULE_ENABLED */ |
| |
| #ifdef HAL_NAND_MODULE_ENABLED |
| #include "stm32h7xx_hal_nand.h" |
| #endif /* HAL_NAND_MODULE_ENABLED */ |
| |
| #ifdef HAL_I2C_MODULE_ENABLED |
| #include "stm32h7xx_hal_i2c.h" |
| #endif /* HAL_I2C_MODULE_ENABLED */ |
| |
| #ifdef HAL_I2S_MODULE_ENABLED |
| #include "stm32h7xx_hal_i2s.h" |
| #endif /* HAL_I2S_MODULE_ENABLED */ |
| |
| #ifdef HAL_IWDG_MODULE_ENABLED |
| #include "stm32h7xx_hal_iwdg.h" |
| #endif /* HAL_IWDG_MODULE_ENABLED */ |
| |
| #ifdef HAL_JPEG_MODULE_ENABLED |
| #include "stm32h7xx_hal_jpeg.h" |
| #endif /* HAL_JPEG_MODULE_ENABLED */ |
| |
| #ifdef HAL_MDIOS_MODULE_ENABLED |
| #include "stm32h7xx_hal_mdios.h" |
| #endif /* HAL_MDIOS_MODULE_ENABLED */ |
| |
| #ifdef HAL_MMC_MODULE_ENABLED |
| #include "stm32h7xx_hal_mmc.h" |
| #endif /* HAL_MMC_MODULE_ENABLED */ |
| |
| #ifdef HAL_LPTIM_MODULE_ENABLED |
| #include "stm32h7xx_hal_lptim.h" |
| #endif /* HAL_LPTIM_MODULE_ENABLED */ |
| |
| #ifdef HAL_LTDC_MODULE_ENABLED |
| #include "stm32h7xx_hal_ltdc.h" |
| #endif /* HAL_LTDC_MODULE_ENABLED */ |
| |
| #ifdef HAL_OPAMP_MODULE_ENABLED |
| #include "stm32h7xx_hal_opamp.h" |
| #endif /* HAL_OPAMP_MODULE_ENABLED */ |
| |
| #ifdef HAL_OSPI_MODULE_ENABLED |
| #include "stm32h7xx_hal_ospi.h" |
| #endif /* HAL_OSPI_MODULE_ENABLED */ |
| |
| #ifdef HAL_OTFDEC_MODULE_ENABLED |
| #include "stm32h7xx_hal_otfdec.h" |
| #endif /* HAL_OTFDEC_MODULE_ENABLED */ |
| |
| #ifdef HAL_PSSI_MODULE_ENABLED |
| #include "stm32h7xx_hal_pssi.h" |
| #endif /* HAL_PSSI_MODULE_ENABLED */ |
| |
| #ifdef HAL_PWR_MODULE_ENABLED |
| #include "stm32h7xx_hal_pwr.h" |
| #endif /* HAL_PWR_MODULE_ENABLED */ |
| |
| #ifdef HAL_QSPI_MODULE_ENABLED |
| #include "stm32h7xx_hal_qspi.h" |
| #endif /* HAL_QSPI_MODULE_ENABLED */ |
| |
| #ifdef HAL_RAMECC_MODULE_ENABLED |
| #include "stm32h7xx_hal_ramecc.h" |
| #endif /* HAL_RAMECC_MODULE_ENABLED */ |
| |
| #ifdef HAL_RNG_MODULE_ENABLED |
| #include "stm32h7xx_hal_rng.h" |
| #endif /* HAL_RNG_MODULE_ENABLED */ |
| |
| #ifdef HAL_RTC_MODULE_ENABLED |
| #include "stm32h7xx_hal_rtc.h" |
| #endif /* HAL_RTC_MODULE_ENABLED */ |
| |
| #ifdef HAL_SAI_MODULE_ENABLED |
| #include "stm32h7xx_hal_sai.h" |
| #endif /* HAL_SAI_MODULE_ENABLED */ |
| |
| #ifdef HAL_SD_MODULE_ENABLED |
| #include "stm32h7xx_hal_sd.h" |
| #endif /* HAL_SD_MODULE_ENABLED */ |
| |
| #ifdef HAL_SDRAM_MODULE_ENABLED |
| #include "stm32h7xx_hal_sdram.h" |
| #endif /* HAL_SDRAM_MODULE_ENABLED */ |
| |
| #ifdef HAL_SPI_MODULE_ENABLED |
| #include "stm32h7xx_hal_spi.h" |
| #endif /* HAL_SPI_MODULE_ENABLED */ |
| |
| #ifdef HAL_SPDIFRX_MODULE_ENABLED |
| #include "stm32h7xx_hal_spdifrx.h" |
| #endif /* HAL_SPDIFRX_MODULE_ENABLED */ |
| |
| #ifdef HAL_SWPMI_MODULE_ENABLED |
| #include "stm32h7xx_hal_swpmi.h" |
| #endif /* HAL_SWPMI_MODULE_ENABLED */ |
| |
| #ifdef HAL_TIM_MODULE_ENABLED |
| #include "stm32h7xx_hal_tim.h" |
| #endif /* HAL_TIM_MODULE_ENABLED */ |
| |
| #ifdef HAL_UART_MODULE_ENABLED |
| #include "stm32h7xx_hal_uart.h" |
| #endif /* HAL_UART_MODULE_ENABLED */ |
| |
| #ifdef HAL_USART_MODULE_ENABLED |
| #include "stm32h7xx_hal_usart.h" |
| #endif /* HAL_USART_MODULE_ENABLED */ |
| |
| #ifdef HAL_IRDA_MODULE_ENABLED |
| #include "stm32h7xx_hal_irda.h" |
| #endif /* HAL_IRDA_MODULE_ENABLED */ |
| |
| #ifdef HAL_SMARTCARD_MODULE_ENABLED |
| #include "stm32h7xx_hal_smartcard.h" |
| #endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
| |
| #ifdef HAL_SMBUS_MODULE_ENABLED |
| #include "stm32h7xx_hal_smbus.h" |
| #endif /* HAL_SMBUS_MODULE_ENABLED */ |
| |
| #ifdef HAL_WWDG_MODULE_ENABLED |
| #include "stm32h7xx_hal_wwdg.h" |
| #endif /* HAL_WWDG_MODULE_ENABLED */ |
| |
| #ifdef HAL_PCD_MODULE_ENABLED |
| #include "stm32h7xx_hal_pcd.h" |
| #endif /* HAL_PCD_MODULE_ENABLED */ |
| |
| #ifdef HAL_HCD_MODULE_ENABLED |
| #include "stm32h7xx_hal_hcd.h" |
| #endif /* HAL_HCD_MODULE_ENABLED */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| #ifdef USE_FULL_ASSERT |
| /** |
| * @brief The assert_param macro is used for function's parameters check. |
| * @param expr: If expr is false, it calls assert_failed function |
| * which reports the name of the source file and the source |
| * line number of the call that failed. |
| * If expr is true, it returns no value. |
| * @retval None |
| */ |
| #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
| /* Exported functions ------------------------------------------------------- */ |
| void assert_failed(uint8_t *file, uint32_t line); |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif /* USE_FULL_ASSERT */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_HAL_CONF_H */ |
| |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
