| /** |
| ****************************************************************************** |
| * @file stm32h7xx_ll_mdma.h |
| * @author MCD Application Team |
| * @brief Header file of MDMA LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_LL_MDMA_H |
| #define STM32H7xx_LL_MDMA_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx.h" |
| |
| /** @addtogroup STM32H7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (MDMA) |
| |
| /** @defgroup MDMA_LL MDMA |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup MDMA_LL_Private_Variables MDMA Private Variables |
| * @{ |
| */ |
| /* Array used to get the MDMA channel register offset versus channel index LL_MDMA_CHANNEL_x */ |
| static const uint32_t LL_MDMA_CH_OFFSET_TAB[] = |
| { |
| (uint32_t)(MDMA_Channel0_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel1_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel2_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel3_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel4_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel5_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel6_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel7_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel8_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel9_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel10_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel11_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel12_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel13_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel14_BASE - MDMA_BASE), |
| (uint32_t)(MDMA_Channel15_BASE - MDMA_BASE) |
| }; |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup MDMA_LL_Private_Constants MDMA Private Constants |
| * @{ |
| */ |
| /** |
| * @} |
| */ |
| |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /* Exported types ------------------------------------------------------------*/ |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup MDMA_LL_ES_INIT MDMA Exported Init structure |
| * @{ |
| */ |
| typedef struct |
| { |
| uint32_t SrcAddress; /*!< Specifies the transfer source address |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSourceAddress() */ |
| |
| uint32_t DstAddress; /*!< Specifies the transfer destination address |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestinationAddress() */ |
| |
| uint32_t RequestMode; /*!< Specifies the request mode Hardware or Software. |
| This parameter can be a value of @ref MDMA_LL_EC_REQUEST_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetRequestMode() */ |
| |
| uint32_t TriggerMode; /*!< Specifies the transfer trigger mode. |
| This parameter can be a value of @ref MDMA_LL_EC_TRIGGER_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetTriggerMode() */ |
| |
| uint32_t HWTrigger; /*!< Specifies the HW transfer trigger used when RequestMode is HW. |
| This parameter can be a value of @ref MDMA_LL_EC_HW_TRIGGER_SELCTION |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetHWTrigger() */ |
| |
| uint32_t BlockDataLength; /*!< Specifies the length of a block transfer in bytes |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0x00010000. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkDataLength() */ |
| |
| uint32_t BlockRepeatCount; /*!< Specifies the Block Repeat Count |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0x00000FFF. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkRepeatCount() */ |
| |
| uint32_t BlockRepeatDestAddrUpdateMode; /*!< Specifies the block repeat destination address update mode. |
| This parameter can be a value of @ref MDMA_LL_EC_BLK_RPT_DEST_ADDR_UPDATE_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkRepeatDestAddrUpdate() */ |
| |
| uint32_t BlockRepeatSrcAddrUpdateMode; /*!< Specifies the block repeat source address update mode. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_BLK_RPT_ADDR_UPDATE_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkRepeatSrcAddrUpdate() */ |
| |
| uint32_t BlockRepeatDestAddrUpdateVal; /*!< Specifies the block repeat destination address update value. |
| This parameter can be a value Between 0 to 0x0000FFFF |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkRptDestAddrUpdateValue() */ |
| |
| uint32_t BlockRepeatSrcAddrUpdateVal; /*!< Specifies the block repeat source address update value. |
| This parameter can be a value Between 0 to 0x0000FFFF |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBlkRptSrcAddrUpdateValue() */ |
| |
| uint32_t LinkAddress; /*!< Specifies the linked list next transfer node address. |
| This parameter can be a value Between 0 to 0xFFFFFFFF |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetLinkAddress() */ |
| |
| uint32_t WordEndianess; /*!< Specifies the Word transfer endianness |
| This parameter can be a value of @ref MDMA_LL_EC_WORD_ENDIANNESS. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetWordEndianness() */ |
| |
| uint32_t HalfWordEndianess; /*!< Specifies the Half Word transfer endianness |
| This parameter can be a value of @ref MDMA_LL_EC_HALFWORD_ENDIANNESS. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetHalfWordEndianness() */ |
| |
| uint32_t ByteEndianess; /*!< Specifies the Byte transfer endianness |
| This parameter can be a value of @ref MDMA_LL_EC_BYTE_ENDIANNESS. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetByteEndianness() */ |
| |
| uint32_t Priority; /*!< Specifies the channel priority level. |
| This parameter can be a value of @ref MDMA_LL_EC_PRIORITY |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetChannelPriorityLevel() */ |
| |
| uint32_t BufferableWriteMode; /*!< Specifies the transfer Bufferable Write Mode. |
| This parameter can be a value of @ref MDMA_LL_EC_BUFF_WRITE_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_EnableBufferableWrMode() |
| and LL_MDMA_DisableBufferableWrMode */ |
| |
| |
| uint32_t PaddingAlignment; /*!< Specifies the transfer Padding and Alignment. |
| This parameter can be a value of @ref MDMA_LL_EC_PADDING_ALIGNMENT_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetPaddingAlignment() */ |
| |
| uint32_t PackMode; /*!< Specifies the transfer Packing enabled or disabled. |
| This parameter can be a value of @ref MDMA_LL_EC_PACKING_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_EnablePacking() |
| and LL_MDMA_DisablePacking() */ |
| |
| uint32_t BufferTransferLength; /*!< Specifies the length of a buffer transfer in bytes |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000007F. |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetBufferTransferLength() */ |
| |
| uint32_t DestBurst; /*!< Specifies the destination burst size. |
| This parameter can be a value of @ref MDMA_LL_EC_DEST_BURST |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestinationBurstSize() */ |
| |
| uint32_t SrctBurst; /*!< Specifies the source burst size. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_BURST |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSourceBurstSize() */ |
| |
| uint32_t DestIncSize; /*!< Specifies the destination increment size. |
| This parameter can be a value of @ref MDMA_LL_EC_DEST_INC_OFFSET_SIZE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestinationIncSize() */ |
| |
| uint32_t SrcIncSize; /*!< Specifies the source increment size. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_INC_OFFSET_SIZE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSourceIncSize() */ |
| |
| uint32_t DestDataSize; /*!< Specifies the destination data size. |
| This parameter can be a value of @ref MDMA_LL_EC_DEST_DATA_SIZE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestinationDataSize() */ |
| |
| uint32_t SrcDataSize; /*!< Specifies the source data size. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_DATA_SIZE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSourceDataSize() */ |
| |
| uint32_t DestIncMode; /*!< Specifies the destination increment mode. |
| This parameter can be a value of @ref MDMA_LL_EC_DEST_INC_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestinationIncMode() */ |
| |
| uint32_t SrcIncMode; /*!< Specifies the source increment mode. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_INC_MODE |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSourceIncMode() */ |
| |
| |
| uint32_t DestBus; /*!< Specifies the destination transfer bus, System AXI or AHB/TCM bus. |
| This parameter can be a value of @ref MDMA_LL_EC_DEST_BUS |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetDestBusSelection() */ |
| |
| uint32_t SrcBus; /*!< Specifies the source transfer bus, System AXI or AHB/TCM bus. |
| This parameter can be a value of @ref MDMA_LL_EC_SRC_BUS |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetSrcBusSelection() */ |
| |
| uint32_t MaskAddress; /*!< Specifies the address to be updated (written) with MaskData after a request is served. |
| MaskAddress and MaskData could be used to automatically clear a peripheral flag when the request is served |
| This parameter can be a value Between 0 to 0xFFFFFFFF |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetMaskAddress() */ |
| |
| uint32_t MaskData; /*!< Specifies the value to be written to MaskAddress after a request is served. |
| MaskAddress and MaskData could be used to automatically clear a peripheral flag when the request is served |
| This parameter can be a value Between 0 to 0xFFFFFFFF |
| This feature can be modified afterwards using unitary function @ref LL_MDMA_SetMaskData() */ |
| |
| } LL_MDMA_InitTypeDef; |
| |
| /** |
| * @brief LL MDMA linked list node structure definition |
| * @note The Linked list node allows to define a new MDMA configuration |
| * (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers). |
| * When CLAR register is configured to a non NULL value , each time a transfer ends, |
| * a new configuration (linked list node) is automatically loaded from the address given in CLAR register. |
| */ |
| typedef struct |
| { |
| __IO uint32_t CTCR; /*!< New CTCR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CBNDTR; /*!< New CBNDTR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CSAR; /*!< New CSAR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CDAR; /*!< New CDAR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CBRUR; /*!< New CBRUR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CLAR; /*!< New CLAR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CTBR; /*!< New CTBR register configuration for the given MDMA linked list node */ |
| __IO uint32_t Reserved; /*!< Reserved register*/ |
| __IO uint32_t CMAR; /*!< New CMAR register configuration for the given MDMA linked list node */ |
| __IO uint32_t CMDR; /*!< New CMDR register configuration for the given MDMA linked list node */ |
| |
| }LL_MDMA_LinkNodeTypeDef; |
| |
| /** |
| * @} |
| */ |
| #endif /*USE_FULL_LL_DRIVER*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup MDMA_LL_Exported_Constants MDMA Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup MDMA_LL_EC_CHANNEL CHANNEL |
| * @{ |
| */ |
| #define LL_MDMA_CHANNEL_0 0x00000000U |
| #define LL_MDMA_CHANNEL_1 0x00000001U |
| #define LL_MDMA_CHANNEL_2 0x00000002U |
| #define LL_MDMA_CHANNEL_3 0x00000003U |
| #define LL_MDMA_CHANNEL_4 0x00000004U |
| #define LL_MDMA_CHANNEL_5 0x00000005U |
| #define LL_MDMA_CHANNEL_6 0x00000006U |
| #define LL_MDMA_CHANNEL_7 0x00000007U |
| #define LL_MDMA_CHANNEL_8 0x00000008U |
| #define LL_MDMA_CHANNEL_9 0x00000009U |
| #define LL_MDMA_CHANNEL_10 0x0000000AU |
| #define LL_MDMA_CHANNEL_11 0x0000000BU |
| #define LL_MDMA_CHANNEL_12 0x0000000CU |
| #define LL_MDMA_CHANNEL_13 0x0000000DU |
| #define LL_MDMA_CHANNEL_14 0x0000000EU |
| #define LL_MDMA_CHANNEL_15 0x0000000FU |
| #define LL_MDMA_CHANNEL_ALL 0xFFFF0000U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_WORD_ENDIANNESS Word Endianness |
| * @{ |
| */ |
| #define LL_MDMA_WORD_ENDIANNESS_PRESERVE 0x00000000U /*!< Little endianness preserved for words */ |
| #define LL_MDMA_WORD_ENDIANNESS_EXCHANGE MDMA_CCR_WEX /*!< word order exchanged when destination data size is double word */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_HALFWORD_ENDIANNESS Half Word Endianness |
| * @{ |
| */ |
| #define LL_MDMA_HALFWORD_ENDIANNESS_PRESERVE 0x00000000U /*!< Little endianness preserved for half words */ |
| #define LL_MDMA_HALFWORD_ENDIANNESS_EXCHANGE MDMA_CCR_HEX /*!< half word order exchanged when destination data size is word or double word */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_BYTE_ENDIANNESS Byte Endianness |
| * @{ |
| */ |
| #define LL_MDMA_BYTE_ENDIANNESS_PRESERVE 0x00000000U /*!< Little endianness preserved for bytes */ |
| #define LL_MDMA_BYTE_ENDIANNESS_EXCHANGE MDMA_CCR_BEX /*!< byte order exchanged when destination data size is half word , word or double word */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_PRIORITY Transfer Priority level |
| * @{ |
| */ |
| #define LL_MDMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ |
| #define LL_MDMA_PRIORITY_MEDIUM MDMA_CCR_PL_0 /*!< Priority level : Medium */ |
| #define LL_MDMA_PRIORITY_HIGH MDMA_CCR_PL_1 /*!< Priority level : High */ |
| #define LL_MDMA_PRIORITY_VERYHIGH MDMA_CCR_PL /*!< Priority level : Very_High */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_BUFF_WRITE_MODE Bufferable Write Mode |
| * @{ |
| */ |
| #define LL_MDMA_BUFF_WRITE_DISABLE 0x00000000U /*!< destination write operation is non-bufferable */ |
| #define LL_MDMA_BUFF_WRITE_ENABLE MDMA_CTCR_BWM /*!< destination write operation is bufferable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_REQUEST_MODE Request Mode |
| * @{ |
| */ |
| #define LL_MDMA_REQUEST_MODE_HW 0x00000000U /*!< Request mode is Hardware */ |
| #define LL_MDMA_REQUEST_MODE_SW MDMA_CTCR_SWRM /*!< Request mode is Software */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_TRIGGER_MODE Trigger Mode |
| * @{ |
| */ |
| #define LL_MDMA_BUFFER_TRANSFER 0x00000000U /*!< Each MDMA request (SW or HW) triggers a buffer transfer */ |
| #define LL_MDMA_BLOCK_TRANSFER MDMA_CTCR_TRGM_0 /*!< Each MDMA request (SW or HW) triggers a block transfer */ |
| #define LL_MDMA_REPEAT_BLOCK_TRANSFER MDMA_CTCR_TRGM_1 /*!< Each MDMA request (SW or HW) triggers a repeated block transfer */ |
| #define LL_MDMA_FULL_TRANSFER MDMA_CTCR_TRGM /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_PADDING_ALIGNMENT_MODE Padding Alignment Mode |
| * @{ |
| */ |
| #define LL_MDMA_DATAALIGN_RIGHT 0x00000000U /*!< Right Aligned, padded w/ 0s (default) */ |
| #define LL_MDMA_DATAALIGN_RIGHT_SIGNED MDMA_CTCR_PAM_0 /*!< Right Aligned, Sign extended , |
| Note : this mode is allowed only if the Source data size smaller than Destination data size */ |
| #define LL_MDMA_DATAALIGN_LEFT MDMA_CTCR_PAM_1 /*!< Left Aligned (padded with 0s) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_PACKING_MODE Transfer Packing |
| * @{ |
| */ |
| #define LL_MDMA_PACK_DISABLE 0x00000000U /*!< Packing disabled */ |
| #define LL_MDMA_PACK_ENABLE MDMA_CTCR_PKE /*!< Packing enabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_DEST_BURST Transfer Destination Burst |
| * @{ |
| */ |
| #define LL_MDMA_DEST_BURST_SINGLE 0x00000000U /*!< Single transfer */ |
| #define LL_MDMA_DEST_BURST_2BEATS MDMA_CTCR_DBURST_0 /*!< Burst 2 beats */ |
| #define LL_MDMA_DEST_BURST_4BEATS MDMA_CTCR_DBURST_1 /*!< Burst 4 beats */ |
| #define LL_MDMA_DEST_BURST_8BEATS (MDMA_CTCR_DBURST_0 | MDMA_CTCR_DBURST_1) /*!< Burst 8 beats */ |
| #define LL_MDMA_DEST_BURST_16BEATS MDMA_CTCR_DBURST_2 /*!< Burst 16 beats */ |
| #define LL_MDMA_DEST_BURST_32BEATS (MDMA_CTCR_DBURST_0 | MDMA_CTCR_DBURST_2) /*!< Burst 32 beats */ |
| #define LL_MDMA_DEST_BURST_64BEATS (MDMA_CTCR_DBURST_1 | MDMA_CTCR_DBURST_2) /*!< Burst 64 beats */ |
| #define LL_MDMA_DEST_BURST_128BEATS (MDMA_CTCR_DBURST) /*!< Burst 128 beats */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_BURST Transfer Source Burst |
| * @{ |
| */ |
| #define LL_MDMA_SRC_BURST_SINGLE 0x00000000U /*!< Single transfer */ |
| #define LL_MDMA_SRC_BURST_2BEATS MDMA_CTCR_SBURST_0 /*!< Burst 2 beats */ |
| #define LL_MDMA_SRC_BURST_4BEATS MDMA_CTCR_SBURST_1 /*!< Burst 4 beats */ |
| #define LL_MDMA_SRC_BURST_8BEATS (MDMA_CTCR_SBURST_0 | MDMA_CTCR_SBURST_1) /*!< Burst 8 beats */ |
| #define LL_MDMA_SRC_BURST_16BEATS MDMA_CTCR_SBURST_2 /*!< Burst 16 beats */ |
| #define LL_MDMA_SRC_BURST_32BEATS (MDMA_CTCR_SBURST_0 | MDMA_CTCR_SBURST_2) /*!< Burst 32 beats */ |
| #define LL_MDMA_SRC_BURST_64BEATS (MDMA_CTCR_SBURST_1 | MDMA_CTCR_SBURST_2) /*!< Burst 64 beats */ |
| #define LL_MDMA_SRC_BURST_128BEATS MDMA_CTCR_SBURST /*!< Burst 128 beats */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_DEST_INC_OFFSET_SIZE Destination Increment Offset Size |
| * @{ |
| */ |
| #define LL_MDMA_DEST_INC_OFFSET_BYTE 0x00000000U /*!< offset is Byte (8-bit) */ |
| #define LL_MDMA_DEST_INC_OFFSET_HALFWORD MDMA_CTCR_DINCOS_0 /*!< offset is Half Word (16-bit) */ |
| #define LL_MDMA_DEST_INC_OFFSET_WORD MDMA_CTCR_DINCOS_1 /*!< offset is Word (32-bit) */ |
| #define LL_MDMA_DEST_INC_OFFSET_DOUBLEWORD MDMA_CTCR_DINCOS /*!< offset is Double Word (64-bit) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_INC_OFFSET_SIZE Source Increment Offset Size |
| * @{ |
| */ |
| #define LL_MDMA_SRC_INC_OFFSET_BYTE 0x00000000U /*!< offset is Byte (8-bit) */ |
| #define LL_MDMA_SRC_INC_OFFSET_HALFWORD MDMA_CTCR_SINCOS_0 /*!< offset is Half Word (16-bit) */ |
| #define LL_MDMA_SRC_INC_OFFSET_WORD MDMA_CTCR_SINCOS_1 /*!< offset is Word (32-bit) */ |
| #define LL_MDMA_SRC_INC_OFFSET_DOUBLEWORD MDMA_CTCR_SINCOS /*!< offset is Double Word (64-bit) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_DEST_DATA_SIZE Destination Data Size |
| * @{ |
| */ |
| #define LL_MDMA_DEST_DATA_SIZE_BYTE 0x00000000U /*!< Destination data size is Byte */ |
| #define LL_MDMA_DEST_DATA_SIZE_HALFWORD MDMA_CTCR_DSIZE_0 /*!< Destination data size is half word */ |
| #define LL_MDMA_DEST_DATA_SIZE_WORD MDMA_CTCR_DSIZE_1 /*!< Destination data size is word */ |
| #define LL_MDMA_DEST_DATA_SIZE_DOUBLEWORD MDMA_CTCR_DSIZE /*!< Destination data size is double word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_DATA_SIZE Source Data Size |
| * @{ |
| */ |
| #define LL_MDMA_SRC_DATA_SIZE_BYTE 0x00000000U /*!< Source data size is Byte */ |
| #define LL_MDMA_SRC_DATA_SIZE_HALFWORD MDMA_CTCR_SSIZE_0 /*!< Source data size is half word */ |
| #define LL_MDMA_SRC_DATA_SIZE_WORD MDMA_CTCR_SSIZE_1 /*!< Source data size is word */ |
| #define LL_MDMA_SRC_DATA_SIZE_DOUBLEWORD MDMA_CTCR_SSIZE /*!< Source data size is double word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_DEST_INC_MODE Destination Increment Mode |
| * @{ |
| */ |
| #define LL_MDMA_DEST_FIXED 0x00000000U /*!< Destination address pointer is fixed */ |
| #define LL_MDMA_DEST_INCREMENT MDMA_CTCR_DINC_1 /*!< Destination address pointer is incremented after each data transfer */ |
| #define LL_MDMA_DEST_DECREMENT MDMA_CTCR_DINC /*!< Destination address pointer is decremented after each data transfer */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_INC_MODE Source Increment Mode |
| * @{ |
| */ |
| #define LL_MDMA_SRC_FIXED 0x00000000U /*!< Destination address pointer is fixed */ |
| #define LL_MDMA_SRC_INCREMENT MDMA_CTCR_SINC_1 /*!< Destination address pointer is incremented after each data transfer */ |
| #define LL_MDMA_SRC_DECREMENT MDMA_CTCR_SINC /*!< Destination address pointer is decremented after each data transfer */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_BLK_RPT_DEST_ADDR_UPDATE_MODE Block Repeat Destination address Update Mode |
| * @{ |
| */ |
| #define LL_MDMA_BLK_RPT_DEST_ADDR_INCREMENT 0x00000000U /*!< Destination address pointer is incremented after each block transfer by Destination Update Value */ |
| #define LL_MDMA_BLK_RPT_DEST_ADDR_DECREMENT MDMA_CBNDTR_BRDUM /*!< Destination address pointer is decremented after each block transfer by Destination Update Value */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_BLK_RPT_ADDR_UPDATE_MODE Source Block Repeat address Update Mode |
| * @{ |
| */ |
| #define LL_MDMA_BLK_RPT_SRC_ADDR_INCREMENT 0x00000000U /*!< Source address pointer is incremented after each block transfer by Source Update Value */ |
| #define LL_MDMA_BLK_RPT_SRC_ADDR_DECREMENT MDMA_CBNDTR_BRSUM /*!< Source address pointer is decremented after each block transfer by Source Update Value */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_DEST_BUS Destination BUS Selection |
| * @{ |
| */ |
| #define LL_MDMA_DEST_BUS_SYSTEM_AXI 0x00000000U /*!< System/AXI bus is used as destination */ |
| #define LL_MDMA_DEST_BUS_AHB_TCM MDMA_CTBR_DBUS /*!< AHB bus/TCM is used as destination */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_SRC_BUS Source BUS Selection |
| * @{ |
| */ |
| #define LL_MDMA_SRC_BUS_SYSTEM_AXI 0x00000000U /*!< System/AXI bus is used as source */ |
| #define LL_MDMA_SRC_BUS_AHB_TCM MDMA_CTBR_SBUS /*!< AHB bus/TCM is used as source */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_HW_TRIGGER_SELCTION HW Trigger Selection |
| * @{ |
| */ |
| #define LL_MDMA_REQ_DMA1_STREAM0_TC 0x00000000U /*!< MDMA HW Trigger (request) is DMA1 Stream 0 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM1_TC 0x00000001U /*!< MDMA HW Trigger (request) is DMA1 Stream 1 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM2_TC 0x00000002U /*!< MDMA HW Trigger (request) is DMA1 Stream 2 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM3_TC 0x00000003U /*!< MDMA HW Trigger (request) is DMA1 Stream 3 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM4_TC 0x00000004U /*!< MDMA HW Trigger (request) is DMA1 Stream 4 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM5_TC 0x00000005U /*!< MDMA HW Trigger (request) is DMA1 Stream 5 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM6_TC 0x00000006U /*!< MDMA HW Trigger (request) is DMA1 Stream 6 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA1_STREAM7_TC 0x00000007U /*!< MDMA HW Trigger (request) is DMA1 Stream 7 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM0_TC 0x00000008U /*!< MDMA HW Trigger (request) is DMA2 Stream 0 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM1_TC 0x00000009U /*!< MDMA HW Trigger (request) is DMA2 Stream 1 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM2_TC 0x0000000AU /*!< MDMA HW Trigger (request) is DMA2 Stream 2 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM3_TC 0x0000000BU /*!< MDMA HW Trigger (request) is DMA2 Stream 3 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM4_TC 0x0000000CU /*!< MDMA HW Trigger (request) is DMA2 Stream 4 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM5_TC 0x0000000DU /*!< MDMA HW Trigger (request) is DMA2 Stream 5 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM6_TC 0x0000000EU /*!< MDMA HW Trigger (request) is DMA2 Stream 6 Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2_STREAM7_TC 0x0000000FU /*!< MDMA HW Trigger (request) is DMA2 Stream 7 Transfer Complete Flag */ |
| #if defined (LTDC) |
| #define LL_MDMA_REQ_LTDC_LINE_IT 0x00000010U /*!< MDMA HW Trigger (request) is LTDC Line interrupt Flag */ |
| #endif /* LTDC */ |
| #if defined (JPEG) |
| #define LL_MDMA_REQ_JPEG_INFIFO_TH 0x00000011U /*!< MDMA HW Trigger (request) is JPEG Input FIFO threshold Flag */ |
| #define LL_MDMA_REQ_JPEG_INFIFO_NF 0x00000012U /*!< MDMA HW Trigger (request) is JPEG Input FIFO not full Flag */ |
| #define LL_MDMA_REQ_JPEG_OUTFIFO_TH 0x00000013U /*!< MDMA HW Trigger (request) is JPEG Output FIFO threshold Flag */ |
| #define LL_MDMA_REQ_JPEG_OUTFIFO_NE 0x00000014U /*!< MDMA HW Trigger (request) is JPEG Output FIFO not empty Flag */ |
| #define LL_MDMA_REQ_JPEG_END_CONVERSION 0x00000015U /*!< MDMA HW Trigger (request) is JPEG End of conversion Flag */ |
| #endif /* JPEG */ |
| #if defined (QUADSPI) |
| #define LL_MDMA_REQ_QUADSPI_FIFO_TH 0x00000016U /*!< MDMA HW Trigger (request) is QSPI FIFO threshold Flag */ |
| #define LL_MDMA_REQ_QUADSPI_TC 0x00000017U /*!< MDMA HW Trigger (request) is QSPI Transfer complete Flag */ |
| #endif /* QUADSPI */ |
| #if defined (OCTOSPI1) |
| #define LL_MDMA_REQ_OCTOSPI1_FIFO_TH 0x00000016U /*!< MDMA HW Trigger (request) is OCTOSPI1 FIFO threshold Flag */ |
| #define LL_MDMA_REQ_OCTOSPI1_TC 0x00000017U /*!< MDMA HW Trigger (request) is OCTOSPI1 Transfer complete Flag */ |
| #endif /* OCTOSPI1 */ |
| #define LL_MDMA_REQ_DMA2D_CLUT_TC 0x00000018U /*!< MDMA HW Trigger (request) is DMA2D CLUT Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2D_TC 0x00000019U /*!< MDMA HW Trigger (request) is DMA2D Transfer Complete Flag */ |
| #define LL_MDMA_REQ_DMA2D_TW 0x0000001AU /*!< MDMA HW Trigger (request) is DMA2D Transfer Watermark Flag */ |
| #if defined (DSI) |
| #define LL_MDMA_REQ_DSI_TEARING_EFFECT 0x0000001BU /*!< MDMA HW Trigger (request) is DSI Tearing Effect Flag */ |
| #define LL_MDMA_REQ_DSI_END_REFRESH 0x0000001CU /*!< MDMA HW Trigger (request) is DSI End of refresh Flag */ |
| #endif /* DSI */ |
| #define LL_MDMA_REQ_SDMMC1_END_DATA 0x0000001DU /*!< MDMA HW Trigger (request) is SDMMC1 End of Data Flag */ |
| #define LL_MDMA_REQ_SDMMC1_DMA_ENDBUFFER 0x0000001EU /*!< MDMA HW Trigger (request) is SDMMC1 Internal DMA buffer End Flag : This trigger is available starting from STM32H7 Rev.B devices */ |
| #define LL_MDMA_REQ_SDMMC1_COMMAND_END 0x0000001FU /*!< MDMA HW Trigger (request) is SDMMC1 Command End Flag : This trigger is available starting from STM32H7 Rev.B devices */ |
| #if defined (OCTOSPI2) |
| #define LL_MDMA_REQ_OCTOSPI2_FIFO_TH 0x00000020U /*!< MDMA HW Trigger (request) is OCTOSPI2 FIFO threshold Flag */ |
| #define LL_MDMA_REQ_OCTOSPI2_TC 0x00000021U /*!< MDMA HW Trigger (request) is OCTOSPI2 Transfer complete Flag */ |
| #endif /* OCTOSPI2 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EC_XFER_ERROR_DIRECTION Transfer Error Direction |
| * @{ |
| */ |
| #define LL_MDMA_READ_ERROR 0x00000000U /*!< Last transfer error on the channel was a related to a read access */ |
| #define LL_MDMA_WRITE_ERROR MDMA_CESR_TED /*!< Last transfer error on the channel was a related to a write access */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup MDMA_LL_Exported_Macros MDMA Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup MDMA_LL_EM_WRITE_READ Common Write and read registers macros |
| * @{ |
| */ |
| /** |
| * @brief Write a value in MDMA register |
| * @param __INSTANCE__ MDMA Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_MDMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) |
| |
| /** |
| * @brief Read a value in MDMA register |
| * @param __INSTANCE__ MDMA Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_MDMA_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EM_CONVERT_DMAxCHANNELy Convert MDMAxChannely |
| * @{ |
| */ |
| /** |
| * @brief Convert MDMAx_Channely into MDMAx |
| * @param __CHANNEL_INSTANCE__ MDMAx_Channely |
| * @retval MDMAx |
| */ |
| #define LL_MDMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (MDMA) |
| |
| /** |
| * @brief Convert MDMAx_Channely into LL_MDMA_CHANNEL_y |
| * @param __CHANNEL_INSTANCE__ MDMAx_Channely |
| * @retval LL_MDMA_CHANNEL_y |
| */ |
| #define LL_MDMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ |
| (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel0 )) ? LL_MDMA_CHANNEL_0 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel1 )) ? LL_MDMA_CHANNEL_1 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel2 )) ? LL_MDMA_CHANNEL_2 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel3 )) ? LL_MDMA_CHANNEL_3 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel4 )) ? LL_MDMA_CHANNEL_4 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel5 )) ? LL_MDMA_CHANNEL_5 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel6 )) ? LL_MDMA_CHANNEL_6 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel7 )) ? LL_MDMA_CHANNEL_7 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel8 )) ? LL_MDMA_CHANNEL_8 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel9 )) ? LL_MDMA_CHANNEL_9 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel10)) ? LL_MDMA_CHANNEL_10 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel11)) ? LL_MDMA_CHANNEL_11 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel12)) ? LL_MDMA_CHANNEL_12 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel13)) ? LL_MDMA_CHANNEL_13 : \ |
| ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)MDMA_Channel14)) ? LL_MDMA_CHANNEL_14 : \ |
| LL_MDMA_CHANNEL_15) |
| |
| /** |
| * @brief Convert MDMA Instance MDMAx and LL_MDMA_CHANNEL_y into MDMAx_Channely |
| * @param __MDMA_INSTANCE__ MDMAx |
| * @param __CHANNEL__ LL_MDMA_CHANNEL_y |
| * @retval MDMAx_Channely |
| */ |
| #define LL_MDMA_GET_CHANNEL_INSTANCE(__MDMA_INSTANCE__, __CHANNEL__) \ |
| (((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_0 )) ? MDMA_Channel0 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_1 )) ? MDMA_Channel1 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_2 )) ? MDMA_Channel2 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_3 )) ? MDMA_Channel3 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_4 )) ? MDMA_Channel4 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_5 )) ? MDMA_Channel5 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_6 )) ? MDMA_Channel6 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_7 )) ? MDMA_Channel7 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_8 )) ? MDMA_Channel8 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_9 )) ? MDMA_Channel9 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_10)) ? MDMA_Channel10 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_11)) ? MDMA_Channel11 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_12)) ? MDMA_Channel12 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_13)) ? MDMA_Channel13 : \ |
| ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_MDMA_CHANNEL_14)) ? MDMA_Channel14 : \ |
| MDMA_Channel15) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup MDMA_LL_Exported_Functions MDMA Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup MDMA_LL_EF_Configuration Configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable MDMA channel. |
| * @rmtoll CCR EN LL_MDMA_EnableChannel |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableChannel(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_EN); |
| } |
| |
| /** |
| * @brief Disable MDMA channel. |
| * @rmtoll CCR EN LL_MDMA_DisableChannel |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableChannel(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_EN); |
| } |
| |
| /** |
| * @brief Check if MDMA channel is enabled or disabled. |
| * @rmtoll CCR EN LL_MDMA_IsEnabledChannel |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledChannel(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_EN) == (MDMA_CCR_EN)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Generate a SW transfer request on the MDMA channel. |
| * @rmtoll CCR SWRQ LL_MDMA_GenerateSWRequest |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_GenerateSWRequest(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_SWRQ); |
| } |
| |
| /** |
| * @brief Configure Transfer endianness parameters : Word, Half word and Bytes Endianness. |
| * @rmtoll CCR WEX LL_MDMA_ConfigXferEndianness\n |
| * @rmtoll CCR HEX LL_MDMA_ConfigXferEndianness\n |
| * @rmtoll CCR BEX LL_MDMA_ConfigXferEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_MDMA_WORD_ENDIANNESS_PRESERVE or @ref LL_MDMA_WORD_ENDIANNESS_EXCHANGE |
| * @arg @ref LL_MDMA_HALFWORD_ENDIANNESS_PRESERVE or @ref LL_MDMA_HALFWORD_ENDIANNESS_EXCHANGE |
| * @arg @ref LL_MDMA_BYTE_ENDIANNESS_PRESERVE or @ref LL_MDMA_BYTE_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigXferEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, |
| MDMA_CCR_WEX | MDMA_CCR_HEX | MDMA_CCR_BEX, Configuration); |
| } |
| |
| /** |
| * @brief Set Words Endianness. |
| * @rmtoll CCR WEX LL_MDMA_SetWordEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Endianness This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_WORD_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_WORD_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetWordEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Endianness) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_WEX, Endianness); |
| } |
| |
| /** |
| * @brief Get Words Endianness. |
| * @rmtoll CCR WEX LL_MDMA_GetWordEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_WORD_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_WORD_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetWordEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_WEX)); |
| } |
| |
| /** |
| * @brief Set Half Words Endianness. |
| * @rmtoll CCR HEX LL_MDMA_SetHalfWordEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Endianness This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_HALFWORD_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_HALFWORD_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetHalfWordEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Endianness) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_HEX, Endianness); |
| } |
| |
| /** |
| * @brief Get Half Words Endianness. |
| * @rmtoll CCR HEX LL_MDMA_GetHalfWordEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_HALFWORD_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_HALFWORD_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetHalfWordEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_HEX)); |
| } |
| |
| /** |
| * @brief Set Bytes Endianness. |
| * @rmtoll CCR BEX LL_MDMA_SetByteEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Endianness This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_BYTE_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_BYTE_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetByteEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Endianness) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_BEX, Endianness); |
| } |
| |
| /** |
| * @brief Get Bytes Endianness. |
| * @rmtoll CCR BEX LL_MDMA_GetByteEndianness |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_BYTE_ENDIANNESS_PRESERVE |
| * @arg @ref LL_MDMA_BYTE_ENDIANNESS_EXCHANGE |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetByteEndianness(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_BEX)); |
| } |
| |
| /** |
| * @brief Set Channel priority level. |
| * @rmtoll CCR PL LL_MDMA_SetChannelPriorityLevel |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Priority This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_PRIORITY_LOW |
| * @arg @ref LL_MDMA_PRIORITY_MEDIUM |
| * @arg @ref LL_MDMA_PRIORITY_HIGH |
| * @arg @ref LL_MDMA_PRIORITY_VERYHIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetChannelPriorityLevel(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Priority) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_PL, Priority); |
| } |
| |
| /** |
| * @brief Get Channel priority level. |
| * @rmtoll CCR PL LL_MDMA_GetChannelPriorityLevel |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_PRIORITY_LOW |
| * @arg @ref LL_MDMA_PRIORITY_MEDIUM |
| * @arg @ref LL_MDMA_PRIORITY_HIGH |
| * @arg @ref LL_MDMA_PRIORITY_VERYHIGH |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetChannelPriorityLevel(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR, MDMA_CCR_PL)); |
| } |
| |
| /** |
| * @brief Configure MDMA transfer parameters. |
| * @rmtoll CTCR BWM LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR SWRM LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR TRGM LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR PAM LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR PKE LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR TLEN LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR DBURST LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR SBURST LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR DINCOS LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR SINCOS LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR DSIZE LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR SSIZE LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR DINC LL_MDMA_ConfigTransfer\n |
| * @rmtoll CTCR SINC LL_MDMA_ConfigTransfer |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_MDMA_BUFF_WRITE_DISABLE or @ref LL_MDMA_BUFF_WRITE_ENABLE |
| * @arg @ref LL_MDMA_REQUEST_MODE_HW or @ref LL_MDMA_REQUEST_MODE_SW |
| * @arg @ref LL_MDMA_BUFFER_TRANSFER or @ref LL_MDMA_BLOCK_TRANSFER or @ref LL_MDMA_REPEAT_BLOCK_TRANSFER or @ref LL_MDMA_FULL_TRANSFER |
| * @arg @ref LL_MDMA_DATAALIGN_RIGHT or @ref LL_MDMA_DATAALIGN_RIGHT_SIGNED or @ref LL_MDMA_DATAALIGN_LEFT |
| * @arg @ref LL_MDMA_PACK_DISABLE or @ref LL_MDMA_PACK_ENABLE |
| * @arg @ref LL_MDMA_DEST_BURST_SINGLE or @ref LL_MDMA_DEST_BURST_2BEATS or @ref LL_MDMA_DEST_BURST_4BEATS or @ref LL_MDMA_DEST_BURST_8BEATS |
| * or @ref LL_MDMA_DEST_BURST_16BEATS or @ref LL_MDMA_DEST_BURST_32BEATS or @ref LL_MDMA_DEST_BURST_64BEATS or @ref LL_MDMA_DEST_BURST_128BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_SINGLE or @ref LL_MDMA_SRC_BURST_2BEATS or @ref LL_MDMA_SRC_BURST_4BEATS or @ref LL_MDMA_SRC_BURST_8BEATS |
| * or @ref LL_MDMA_SRC_BURST_16BEATS or @ref LL_MDMA_SRC_BURST_32BEATS or @ref LL_MDMA_SRC_BURST_64BEATS or @ref LL_MDMA_SRC_BURST_128BEATS |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_BYTE or @ref LL_MDMA_DEST_INC_OFFSET_HALFWORD or @ref LL_MDMA_DEST_INC_OFFSET_WORD or @ref LL_MDMA_DEST_INC_OFFSET_DOUBLEWORD |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_BYTE or @ref LL_MDMA_SRC_INC_OFFSET_HALFWORD or @ref LL_MDMA_SRC_INC_OFFSET_WORD or @ref LL_MDMA_SRC_INC_OFFSET_DOUBLEWORD |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_BYTE or @ref LL_MDMA_DEST_DATA_SIZE_HALFWORD or @ref LL_MDMA_DEST_DATA_SIZE_WORD or @ref LL_MDMA_DEST_DATA_SIZE_DOUBLEWORD |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_BYTE or @ref LL_MDMA_SRC_DATA_SIZE_HALFWORD or @ref LL_MDMA_SRC_DATA_SIZE_WORD or @ref LL_MDMA_SRC_DATA_SIZE_DOUBLEWORD |
| * @arg @ref LL_MDMA_DEST_FIXED or @ref LL_MDMA_DEST_INCREMENT or @ref LL_MDMA_DEST_DECREMENT |
| * @arg @ref LL_MDMA_SRC_FIXED or @ref LL_MDMA_SRC_INCREMENT or @ref LL_MDMA_SRC_DECREMENT |
| * @param BufferXferLength This parameter can be a value Between 0 to 0x0000007F |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigTransfer(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Configuration, uint32_t BufferXferLength) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, |
| Configuration | ((BufferXferLength << MDMA_CTCR_TLEN_Pos) & MDMA_CTCR_TLEN_Msk)); |
| } |
| |
| /** |
| * @brief Enable Bufferable Write Mode. |
| * @rmtoll CTCR BWM LL_MDMA_EnableBufferableWrMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableBufferableWrMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_BWM); |
| } |
| |
| /** |
| * @brief Disable Bufferable Write Mode. |
| * @rmtoll CTCR BWM LL_MDMA_DisableBufferableWrMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableBufferableWrMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_BWM); |
| } |
| |
| /** |
| * @brief Check if Bufferable Write Mode is enabled or disabled. |
| * @rmtoll CTCR BWM LL_MDMA_IsEnabledBufferableWrMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledBufferableWrMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_BWM) == (MDMA_CTCR_BWM)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set Request Mode. |
| * @rmtoll CTCR SWRM LL_MDMA_SetRequestMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param RequestMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_REQUEST_MODE_HW |
| * @arg @ref LL_MDMA_REQUEST_MODE_SW |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetRequestMode(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t RequestMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SWRM, RequestMode); |
| } |
| |
| /** |
| * @brief Get Request Mode. |
| * @rmtoll CTCR SWRM LL_MDMA_GetRequestMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_REQUEST_MODE_HW |
| * @arg @ref LL_MDMA_REQUEST_MODE_SW |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetRequestMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SWRM)); |
| } |
| |
| /** |
| * @brief Set Trigger Mode. |
| * @rmtoll CTCR TRGM LL_MDMA_SetTriggerMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param TriggerMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_BUFFER_TRANSFER |
| * @arg @ref LL_MDMA_BLOCK_TRANSFER |
| * @arg @ref LL_MDMA_REPEAT_BLOCK_TRANSFER |
| * @arg @ref LL_MDMA_FULL_TRANSFER |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetTriggerMode(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t TriggerMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_TRGM, TriggerMode); |
| } |
| |
| /** |
| * @brief Get Trigger Mode. |
| * @rmtoll CTCR TRGM LL_MDMA_GetTriggerMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_BUFFER_TRANSFER |
| * @arg @ref LL_MDMA_BLOCK_TRANSFER |
| * @arg @ref LL_MDMA_REPEAT_BLOCK_TRANSFER |
| * @arg @ref LL_MDMA_FULL_TRANSFER |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetTriggerMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_TRGM)); |
| } |
| |
| /** |
| * @brief Set Padding Alignment. |
| * @rmtoll CTCR PAM LL_MDMA_SetPaddingAlignment |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param PaddingAlignment This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DATAALIGN_RIGHT |
| * @arg @ref LL_MDMA_DATAALIGN_RIGHT_SIGNED |
| * @arg @ref LL_MDMA_DATAALIGN_LEFT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetPaddingAlignment(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t PaddingAlignment) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_PAM, PaddingAlignment); |
| } |
| |
| /** |
| * @brief Get Padding Alignment. |
| * @rmtoll CTCR PAM LL_MDMA_GetPaddingAlignment |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DATAALIGN_RIGHT |
| * @arg @ref LL_MDMA_DATAALIGN_RIGHT_SIGNED |
| * @arg @ref LL_MDMA_DATAALIGN_LEFT |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetPaddingAlignment(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_PAM)); |
| } |
| |
| |
| /** |
| * @brief Enable Packing. |
| * @rmtoll CTCR PKE LL_MDMA_EnablePacking |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnablePacking(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_PKE); |
| } |
| |
| /** |
| * @brief Disable Packing. |
| * @rmtoll CTCR PKE LL_MDMA_DisablePacking |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisablePacking(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_PKE); |
| } |
| |
| /** |
| * @brief Check if packing is enabled or disabled. |
| * @rmtoll CTCR PKE LL_MDMA_IsEnabledPacking |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledPacking(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_PKE) == (MDMA_CTCR_PKE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set Buffer Transfer Length. |
| * @rmtoll CTCR TLEN LL_MDMA_SetBufferTransferLength |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Length Between 0 to 0x0000007F |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBufferTransferLength(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Length) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_TLEN, |
| (Length << MDMA_CTCR_TLEN_Pos) & MDMA_CTCR_TLEN_Msk); |
| } |
| |
| /** |
| * @brief Get Buffer Transfer Length. |
| * @rmtoll CTCR TLEN LL_MDMA_GetBufferTransferLength |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x0000007F |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBufferTransferLength(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return(READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_TLEN) >> MDMA_CTCR_TLEN_Pos); |
| } |
| |
| /** |
| * @brief Set Destination burst transfer. |
| * @rmtoll CTCR DBURST LL_MDMA_SetDestinationBurstSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Dburst This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_BURST_SINGLE |
| * @arg @ref LL_MDMA_DEST_BURST_2BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_4BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_8BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_16BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_32BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_64BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_128BEATS |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestinationBurstSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Dburst) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DBURST, Dburst); |
| } |
| |
| /** |
| * @brief Get Destination burst transfer. |
| * @rmtoll CTCR DBURST LL_MDMA_GetDestinationBurstSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_BURST_SINGLE |
| * @arg @ref LL_MDMA_DEST_BURST_2BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_4BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_8BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_16BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_32BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_64BEATS |
| * @arg @ref LL_MDMA_DEST_BURST_128BEATS |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestinationBurstSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return(READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DBURST)); |
| } |
| |
| /** |
| * @brief Set Source burst transfer. |
| * @rmtoll CTCR SBURST LL_MDMA_SetSourceBurstSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Sburst This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_BURST_SINGLE |
| * @arg @ref LL_MDMA_SRC_BURST_2BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_4BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_8BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_16BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_32BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_64BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_128BEATS |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSourceBurstSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Sburst) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SBURST, Sburst); |
| } |
| |
| /** |
| * @brief Get Source burst transfer. |
| * @rmtoll CTCR SBURST LL_MDMA_GetSourceBurstSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_BURST_SINGLE |
| * @arg @ref LL_MDMA_SRC_BURST_2BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_4BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_8BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_16BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_32BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_64BEATS |
| * @arg @ref LL_MDMA_SRC_BURST_128BEATS |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSourceBurstSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return(READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SBURST)); |
| } |
| |
| /** |
| * @brief Set Destination Increment Offset Size. |
| * @rmtoll CTCR DINCOS LL_MDMA_SetDestinationIncSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param IncSize This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_BYTE |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_HALFWORD |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_WORD |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestinationIncSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t IncSize) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DINCOS, IncSize); |
| } |
| |
| /** |
| * @brief Get Destination Increment Offset Size. |
| * @rmtoll CTCR DINCOS LL_MDMA_GetDestinationIncSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_BYTE |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_HALFWORD |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_WORD |
| * @arg @ref LL_MDMA_DEST_INC_OFFSET_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestinationIncSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DINCOS)); |
| } |
| |
| /** |
| * @brief Set Source Increment Offset Size. |
| * @rmtoll CTCR SINCOS LL_MDMA_SetSourceIncSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param IncSize This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_BYTE |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_HALFWORD |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_WORD |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSourceIncSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t IncSize) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SINCOS, IncSize); |
| } |
| |
| /** |
| * @brief Get Source Increment Offset Size. |
| * @rmtoll CTCR SINCOS LL_MDMA_GetSourceIncSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_BYTE |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_HALFWORD |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_WORD |
| * @arg @ref LL_MDMA_SRC_INC_OFFSET_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSourceIncSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SINCOS)); |
| } |
| |
| /** |
| * @brief Set Destination Data Size. |
| * @rmtoll CTCR DSIZE LL_MDMA_SetDestinationDataSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestDataSize This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_BYTE |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_HALFWORD |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_WORD |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestinationDataSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestDataSize) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DSIZE, DestDataSize); |
| } |
| |
| /** |
| * @brief Get Destination Data Size. |
| * @rmtoll CTCR DSIZE LL_MDMA_GetDestinationDataSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_BYTE |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_HALFWORD |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_WORD |
| * @arg @ref LL_MDMA_DEST_DATA_SIZE_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestinationDataSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DSIZE)); |
| } |
| |
| /** |
| * @brief Set Source Data Size. |
| * @rmtoll CTCR SSIZE LL_MDMA_SetSourceDataSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcDataSize This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_BYTE |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_HALFWORD |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_WORD |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSourceDataSize(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcDataSize) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SSIZE, SrcDataSize); |
| } |
| |
| /** |
| * @brief Get Source Data Size. |
| * @rmtoll CTCR SSIZE LL_MDMA_GetSourceDataSize |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_BYTE |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_HALFWORD |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_WORD |
| * @arg @ref LL_MDMA_SRC_DATA_SIZE_DOUBLEWORD |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSourceDataSize(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SSIZE)); |
| } |
| |
| /** |
| * @brief Set Destination Increment Mode. |
| * @rmtoll CTCR DINC LL_MDMA_SetDestinationIncMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestIncMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_FIXED |
| * @arg @ref LL_MDMA_DEST_INCREMENT |
| * @arg @ref LL_MDMA_DEST_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestinationIncMode(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestIncMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DINC, DestIncMode); |
| } |
| |
| /** |
| * @brief Get Destination Increment Mode. |
| * @rmtoll CTCR DINC LL_MDMA_GetDestinationIncMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_FIXED |
| * @arg @ref LL_MDMA_DEST_INCREMENT |
| * @arg @ref LL_MDMA_DEST_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestinationIncMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_DINC)); |
| } |
| |
| /** |
| * @brief Set Source Increment Mode. |
| * @rmtoll CTCR SINC LL_MDMA_SetSourceIncMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcIncMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_FIXED |
| * @arg @ref LL_MDMA_SRC_INCREMENT |
| * @arg @ref LL_MDMA_SRC_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSourceIncMode(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcIncMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SINC, SrcIncMode); |
| } |
| |
| /** |
| * @brief Get Source Increment Mode. |
| * @rmtoll CTCR SINC LL_MDMA_GetSourceIncMode |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_FIXED |
| * @arg @ref LL_MDMA_SRC_INCREMENT |
| * @arg @ref LL_MDMA_SRC_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSourceIncMode(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTCR, MDMA_CTCR_SINC)); |
| } |
| |
| /** |
| * @brief Configure MDMA Block number of data and repeat Count. |
| * @rmtoll CBNDTR BRC LL_MDMA_ConfigBlkCounters\n |
| * @rmtoll CBNDTR BNDT LL_MDMA_ConfigBlkCounters |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param BlockRepeatCount Between 0 to 0x00000FFF |
| * @param BlkDataLength Between 0 to 0x00010000 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigBlkCounters(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t BlockRepeatCount, uint32_t BlkDataLength) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, |
| MDMA_CBNDTR_BRC | MDMA_CBNDTR_BNDT, |
| ((BlockRepeatCount << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC_Msk) | (BlkDataLength & MDMA_CBNDTR_BNDT_Msk)); |
| } |
| |
| /** |
| * @brief Set Block Number of data bytes to transfer. |
| * @rmtoll CBNDTR BNDT LL_MDMA_SetBlkDataLength |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param BlkDataLength Between 0 to 0x00010000 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkDataLength(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t BlkDataLength) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BNDT, (BlkDataLength & MDMA_CBNDTR_BNDT_Msk)); |
| } |
| |
| /** |
| * @brief Get Block Number of data bytes to transfer. |
| * @rmtoll CBNDTR BNDT LL_MDMA_GetBlkDataLength |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x00010000 |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkDataLength(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BNDT)); |
| } |
| |
| /** |
| * @brief Set Block Repeat Count. |
| * @rmtoll CBNDTR BRC LL_MDMA_SetBlkRepeatCount |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param BlockRepeatCount Between 0 to 0x00000FFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkRepeatCount(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t BlockRepeatCount) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRC, |
| (BlockRepeatCount << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC_Msk); |
| } |
| |
| /** |
| * @brief Get Block Repeat Count. |
| * @rmtoll CBNDTR BRC LL_MDMA_GetBlkRepeatCount |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x00000FFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkRepeatCount(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRC) >> MDMA_CBNDTR_BRC_Pos); |
| } |
| |
| /** |
| * @brief Configure MDMA block repeat address update mode. |
| * @rmtoll CBNDTR BRDUM LL_MDMA_ConfigBlkRepeatAddrUpdate\n |
| * @rmtoll CBNDTR BRSUM LL_MDMA_ConfigBlkRepeatAddrUpdate |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_MDMA_BLK_RPT_DEST_ADDR_INCREMENT or @ref LL_MDMA_BLK_RPT_DEST_ADDR_DECREMENT |
| * @arg @ref LL_MDMA_BLK_RPT_SRC_ADDR_INCREMENT or @ref LL_MDMA_BLK_RPT_SRC_ADDR_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigBlkRepeatAddrUpdate(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, |
| MDMA_CBNDTR_BRDUM | MDMA_CBNDTR_BRSUM, |
| Configuration); |
| } |
| |
| /** |
| * @brief Set Block Repeat Destination address Update Mode. |
| * @rmtoll CBNDTR BRDUM LL_MDMA_SetBlkRepeatDestAddrUpdate |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestAdrUpdateMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_BLK_RPT_DEST_ADDR_INCREMENT |
| * @arg @ref LL_MDMA_BLK_RPT_DEST_ADDR_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkRepeatDestAddrUpdate(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestAdrUpdateMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRDUM, DestAdrUpdateMode); |
| } |
| |
| /** |
| * @brief Get Block Repeat Destination address Update Mode. |
| * @rmtoll CBNDTR BRDUM LL_MDMA_GetBlkRepeatDestAddrUpdate |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_BLK_RPT_DEST_ADDR_INCREMENT |
| * @arg @ref LL_MDMA_BLK_RPT_DEST_ADDR_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkRepeatDestAddrUpdate(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRDUM)); |
| } |
| |
| /** |
| * @brief Set Block Repeat Source address Update Mode. |
| * @rmtoll CBNDTR BRSUM LL_MDMA_SetBlkRepeatSrcAddrUpdate |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcAdrUpdateMode This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_BLK_RPT_SRC_ADDR_INCREMENT |
| * @arg @ref LL_MDMA_BLK_RPT_SRC_ADDR_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkRepeatSrcAddrUpdate(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcAdrUpdateMode) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRSUM, SrcAdrUpdateMode); |
| } |
| |
| /** |
| * @brief Get Block Repeat Source address Update Mode. |
| * @rmtoll CBNDTR BRSUM LL_MDMA_GetBlkRepeatSrcAddrUpdate |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_BLK_RPT_SRC_ADDR_INCREMENT |
| * @arg @ref LL_MDMA_BLK_RPT_SRC_ADDR_DECREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkRepeatSrcAddrUpdate(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBNDTR, MDMA_CBNDTR_BRSUM)); |
| } |
| |
| /** |
| * @brief Configure the Source and Destination addresses. |
| * @note This API must not be called when the MDMA channel is enabled. |
| * @rmtoll CSAR SAR LL_MDMA_ConfigAddresses\n |
| * @rmtoll CDAR DAR LL_MDMA_ConfigAddresses |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigAddresses(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcAddress, uint32_t DstAddress) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CSAR, SrcAddress); |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CDAR, DstAddress); |
| } |
| /** |
| * @brief Set transfer Source address. |
| * @rmtoll CSAR SAR LL_MDMA_SetSourceAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSourceAddress(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcAddress) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CSAR, SrcAddress); |
| } |
| |
| /** |
| * @brief Get transfer Source address. |
| * @rmtoll CSAR SAR LL_MDMA_GetSourceAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSourceAddress(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CSAR)); |
| } |
| |
| /** |
| * @brief Set transfer Destination address. |
| * @rmtoll CDAR DAR LL_MDMA_SetDestinationAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestinationAddress(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestAddress) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CDAR, DestAddress); |
| } |
| |
| /** |
| * @brief Get transfer Destination address. |
| * @rmtoll CDAR DAR LL_MDMA_GetDestinationAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestinationAddress(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CDAR)); |
| } |
| |
| /** |
| * @brief Configure the Source and Destination Block repeat addresses Update value. |
| * @note This API must not be called when the MDMA channel is enabled. |
| * @rmtoll CBRUR DUV LL_MDMA_ConfigBlkRptAddrUpdateValue\n |
| * @rmtoll CBRUR SUV LL_MDMA_ConfigBlkRptAddrUpdateValue |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrctAdrUpdateValue Min_Data = 0 and Max_Data = 0x0000FFFF |
| * @param DestAdrUpdateValue Between Min_Data = 0 and Max_Data = 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigBlkRptAddrUpdateValue(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrctAdrUpdateValue, uint32_t DestAdrUpdateValue) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBRUR, |
| (SrctAdrUpdateValue & MDMA_CBRUR_SUV_Msk) | ((DestAdrUpdateValue << MDMA_CBRUR_DUV_Pos) & MDMA_CBRUR_DUV_Msk)); |
| } |
| |
| /** |
| * @brief Set transfer Destination address Update Value. |
| * @rmtoll CBRUR DUV LL_MDMA_SetBlkRptDestAddrUpdateValue |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestAdrUpdateValue Between 0 to 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkRptDestAddrUpdateValue(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestAdrUpdateValue) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBRUR, MDMA_CBRUR_DUV, |
| ((DestAdrUpdateValue << MDMA_CBRUR_DUV_Pos) & MDMA_CBRUR_DUV_Msk)); |
| } |
| |
| /** |
| * @brief Get transfer Destination address Update Value. |
| * @rmtoll CBRUR DUV LL_MDMA_GetBlkRptDestAddrUpdateValue |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkRptDestAddrUpdateValue(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBRUR, MDMA_CBRUR_DUV) >> MDMA_CBRUR_DUV_Pos); |
| } |
| |
| /** |
| * @brief Set transfer Source address Update Value. |
| * @rmtoll CBRUR SUV LL_MDMA_SetBlkRptSrcAddrUpdateValue |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcAdrUpdateValue Between 0 to 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetBlkRptSrcAddrUpdateValue(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcAdrUpdateValue) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBRUR, MDMA_CBRUR_SUV, SrcAdrUpdateValue); |
| } |
| |
| /** |
| * @brief Get transfer Source address Update Value. |
| * @rmtoll CBRUR SUV LL_MDMA_GetBlkRptSrcAddrUpdateValue |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x0000FFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetBlkRptSrcAddrUpdateValue(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CBRUR, MDMA_CBRUR_SUV)); |
| } |
| |
| /** |
| * @brief Set transfer Link Address. |
| * @rmtoll CLAR LAR LL_MDMA_SetLinkAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param LinkAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetLinkAddress(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t LinkAddress) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CLAR, LinkAddress); |
| } |
| |
| /** |
| * @brief Get transfer Link Address. |
| * @rmtoll CLAR LAR LL_MDMA_GetLinkAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetLinkAddress(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CLAR)); |
| } |
| |
| /** |
| * @brief Configure MDMA source and destination bus selection. |
| * @rmtoll CTBR DBUS LL_MDMA_ConfigBusSelection\n |
| * @rmtoll CTBR SBUS LL_MDMA_ConfigBusSelection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_MDMA_DEST_BUS_SYSTEM_AXI or @ref LL_MDMA_DEST_BUS_AHB_TCM |
| * @arg @ref LL_MDMA_SRC_BUS_SYSTEM_AXI or @ref LL_MDMA_SRC_BUS_AHB_TCM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ConfigBusSelection(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, |
| MDMA_CTBR_DBUS | MDMA_CTBR_SBUS, |
| Configuration); |
| } |
| |
| /** |
| * @brief Set Destination Bus Selection. |
| * @rmtoll CTBR DBUS LL_MDMA_SetDestBusSelection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param DestBus This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_BUS_SYSTEM_AXI |
| * @arg @ref LL_MDMA_DEST_BUS_AHB_TCM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetDestBusSelection(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t DestBus) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_DBUS, DestBus); |
| } |
| |
| /** |
| * @brief Get Destination Bus Selection. |
| * @rmtoll CTBR DBUS LL_MDMA_GetDestBusSelection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_DEST_BUS_SYSTEM_AXI |
| * @arg @ref LL_MDMA_DEST_BUS_AHB_TCM |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetDestBusSelection(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_DBUS)); |
| } |
| |
| /** |
| * @brief Set Source Bus Selection. |
| * @rmtoll CTBR SBUS LL_MDMA_SetSrcBusSelection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param SrcBus This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_BUS_SYSTEM_AXI |
| * @arg @ref LL_MDMA_SRC_BUS_AHB_TCM |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetSrcBusSelection(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t SrcBus) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_SBUS, SrcBus); |
| } |
| |
| /** |
| * @brief Get Source Bus Selection. |
| * @rmtoll CTBR SBUS LL_MDMA_GetSrcBusSelection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_SRC_BUS_SYSTEM_AXI |
| * @arg @ref LL_MDMA_SRC_BUS_AHB_TCM |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetSrcBusSelection(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_SBUS)); |
| } |
| |
| /** |
| * @brief Set Transfer hardware trigger (Request). |
| * @rmtoll CTBR TSEL LL_MDMA_SetHWTrigger |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param HWRequest This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM0_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM1_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM2_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM3_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM4_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM5_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM6_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM7_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM0_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM1_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM2_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM3_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM4_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM5_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM6_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM7_TC |
| * @arg @ref LL_MDMA_REQ_LTDC_LINE_IT (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_INFIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_INFIFO_NF (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_OUTFIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_OUTFIFO_NE (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_END_CONVERSION (*) |
| * @arg @ref LL_MDMA_REQ_QUADSPI_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_QUADSPI_TC (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI1_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI1_TC (*) |
| * @arg @ref LL_MDMA_REQ_DMA2D_CLUT_TC |
| * @arg @ref LL_MDMA_REQ_DMA2D_TC |
| * @arg @ref LL_MDMA_REQ_DMA2D_TW |
| * @arg @ref LL_MDMA_REQ_DSI_TEARING_EFFECT (*) |
| * @arg @ref LL_MDMA_REQ_DSI_END_REFRESH (*) |
| * @arg @ref LL_MDMA_REQ_SDMMC1_END_DATA |
| * @arg @ref LL_MDMA_REQ_SDMMC1_DMA_ENDBUFFER (*) |
| * @arg @ref LL_MDMA_REQ_SDMMC1_COMMAND_END (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI2_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI2_TC (*) |
| * @note (*) Availability depends on devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetHWTrigger(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t HWRequest) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| MODIFY_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_TSEL, HWRequest); |
| } |
| |
| /** |
| * @brief Get Transfer hardware trigger (Request). |
| * @rmtoll CTBR TSEL LL_MDMA_GetHWTrigger |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM0_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM1_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM2_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM3_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM4_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM5_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM6_TC |
| * @arg @ref LL_MDMA_REQ_DMA1_STREAM7_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM0_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM1_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM2_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM3_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM4_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM5_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM6_TC |
| * @arg @ref LL_MDMA_REQ_DMA2_STREAM7_TC |
| * @arg @ref LL_MDMA_REQ_LTDC_LINE_IT (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_INFIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_INFIFO_NF (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_OUTFIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_OUTFIFO_NE (*) |
| * @arg @ref LL_MDMA_REQ_JPEG_END_CONVERSION (*) |
| * @arg @ref LL_MDMA_REQ_QUADSPI_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_QUADSPI_TC (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI1_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI1_TC (*) |
| * @arg @ref LL_MDMA_REQ_DMA2D_CLUT_TC |
| * @arg @ref LL_MDMA_REQ_DMA2D_TC |
| * @arg @ref LL_MDMA_REQ_DMA2D_TW |
| * @arg @ref LL_MDMA_REQ_DSI_TEARING_EFFECT (*) |
| * @arg @ref LL_MDMA_REQ_DSI_END_REFRESH (*) |
| * @arg @ref LL_MDMA_REQ_SDMMC1_END_DATA |
| * @arg @ref LL_MDMA_REQ_SDMMC1_DMA_ENDBUFFER (*) |
| * @arg @ref LL_MDMA_REQ_SDMMC1_COMMAND_END (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI2_FIFO_TH (*) |
| * @arg @ref LL_MDMA_REQ_OCTOSPI2_TC (*) |
| * @note (*) Availability depends on devices. |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetHWTrigger(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CTBR, MDMA_CTBR_TSEL)); |
| } |
| |
| /** |
| * @brief Set Mask Address. |
| * @rmtoll CMAR MAR LL_MDMA_SetMaskAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param MaskAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetMaskAddress(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t MaskAddress) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CMAR, MaskAddress); |
| } |
| |
| /** |
| * @brief Get Mask Address. |
| * @rmtoll CMAR MAR LL_MDMA_GetMaskAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetMaskAddress(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CMAR)); |
| } |
| |
| /** |
| * @brief Set Mask Data. |
| * @rmtoll CMDR MDR LL_MDMA_SetMaskData |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @param MaskData Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_SetMaskData(MDMA_TypeDef *MDMAx, uint32_t Channel, uint32_t MaskData) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CMDR, MaskData); |
| } |
| |
| /** |
| * @brief Get Mask Data. |
| * @rmtoll CMDR MDR LL_MDMA_GetMaskData |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetMaskData(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_REG(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CMDR)); |
| } |
| |
| /** |
| * @brief Get Transfer Error Direction. |
| * @rmtoll CESR TED LL_MDMA_GetXferErrorDirection |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_MDMA_READ_ERROR |
| * @arg @ref LL_MDMA_WRITE_ERROR |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetXferErrorDirection(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_TED)); |
| } |
| |
| /** |
| * @brief Get Transfer Error LSB Address. |
| * @rmtoll CESR TEA LL_MDMA_GetXferErrorLSBAddress |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval Between 0 to 0x0000007F |
| * @retval None |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_GetXferErrorLSBAddress(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return (READ_BIT(((MDMA_Channel_TypeDef *)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_TEA)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EF_FLAG_Management FLAG_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Get MDMA Channel x Global Interrupt flag. |
| * @rmtoll GISR0 GIFx LL_MDMA_IsActiveFlag_GI |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_GI(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| return ((READ_BIT(MDMAx->GISR0 ,(MDMA_GISR0_GIF0 << (Channel & 0x0000000FU)))==(MDMA_GISR0_GIF0 << (Channel & 0x0000000FU))) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Transfer Error interrupt flag. |
| * @rmtoll CISR TEIF LL_MDMA_IsActiveFlag_TE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_TE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_TEIF) == (MDMA_CISR_TEIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Channel Transfer Complete interrupt flag. |
| * @rmtoll CISR CTCIF LL_MDMA_IsActiveFlag_CTC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_CTC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_CTCIF) == (MDMA_CISR_CTCIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Block Repeat Transfer complete interrupt flag. |
| * @rmtoll CISR BRTIF LL_MDMA_IsActiveFlag_BRT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_BRT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_BRTIF) == (MDMA_CISR_BRTIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Block Transfer complete interrupt flag. |
| * @rmtoll CISR BTIF LL_MDMA_IsActiveFlag_BT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_BT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_BTIF) == (MDMA_CISR_BTIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x buffer transfer complete interrupt flag. |
| * @rmtoll CISR TCIF LL_MDMA_IsActiveFlag_TC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_TC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_TCIF) == (MDMA_CISR_TCIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x ReQuest Active flag. |
| * @rmtoll CISR CRQA LL_MDMA_IsActiveFlag_CRQA |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_CRQA(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CISR, MDMA_CISR_CRQA) == (MDMA_CISR_CRQA)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Block Size Error flag. |
| * @rmtoll CESR BSE LL_MDMA_IsActiveFlag_BSE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_BSE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_BSE) == (MDMA_CESR_BSE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Address/Size Error flag. |
| * @rmtoll CESR ASE LL_MDMA_IsActiveFlag_ASE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_ASE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_ASE) == (MDMA_CESR_ASE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Transfer Error Mask Data flag. |
| * @rmtoll CESR TEMD LL_MDMA_IsActiveFlag_TEMD |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_TEMD(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_TEMD) == (MDMA_CESR_TEMD)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get MDMA Channel x Transfer Error Link Data flag. |
| * @rmtoll CESR TELD LL_MDMA_IsActiveFlag_TELD |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsActiveFlag_TELD(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CESR, MDMA_CESR_TELD) == (MDMA_CESR_TELD)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear MDMA Channel x Transfer Error interrupt flag. |
| * @rmtoll CIFCR CTEIF LL_MDMA_ClearFlag_TE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ClearFlag_TE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CIFCR ,MDMA_CIFCR_CTEIF); |
| } |
| |
| /** |
| * @brief Clear MDMA Channel x Channel Transfer Complete interrupt flag. |
| * @rmtoll CIFCR CCTCIF LL_MDMA_ClearFlag_CTC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ClearFlag_CTC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CIFCR ,MDMA_CIFCR_CCTCIF); |
| } |
| |
| /** |
| * @brief Clear MDMA Channel x Block Repeat Transfer complete interrupt flag. |
| * @rmtoll CIFCR CBRTIF LL_MDMA_ClearFlag_BRT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ClearFlag_BRT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CIFCR ,MDMA_CIFCR_CBRTIF); |
| } |
| |
| /** |
| * @brief Clear MDMA Channel x Block Transfer complete interrupt flag. |
| * @rmtoll CIFCR CBTIF LL_MDMA_ClearFlag_BT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ClearFlag_BT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CIFCR ,MDMA_CIFCR_CBTIF); |
| } |
| |
| /** |
| * @brief Clear MDMA Channel x buffer transfer Complete Interrupt Flag. |
| * @rmtoll CIFCR CLTCIF LL_MDMA_ClearFlag_TC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_ClearFlag_TC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| WRITE_REG(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CIFCR ,MDMA_CIFCR_CLTCIF); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup MDMA_LL_EF_IT_Management IT_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable MDMA Channel x Transfer Error interrupt. |
| * @rmtoll CCR TEIE LL_MDMA_EnableIT_TE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableIT_TE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TEIE); |
| } |
| |
| /** |
| * @brief Enable MDMA Channel x Channel Transfer Complete interrupt. |
| * @rmtoll CCR CTCIE LL_MDMA_EnableIT_CTC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableIT_CTC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_CTCIE); |
| } |
| |
| /** |
| * @brief Enable MDMA Channel x Block Repeat Transfer interrupt. |
| * @rmtoll CCR BRTIE LL_MDMA_EnableIT_BRT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableIT_BRT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BRTIE); |
| } |
| |
| /** |
| * @brief Enable MDMA Channel x Block Transfer interrupt. |
| * @rmtoll CCR BTIE LL_MDMA_EnableIT_BT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableIT_BT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BTIE); |
| } |
| |
| /** |
| * @brief Enable MDMA Channel x buffer transfer complete interrupt. |
| * @rmtoll CCR TCIE LL_MDMA_EnableIT_TC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_EnableIT_TC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| SET_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TCIE); |
| } |
| |
| /** |
| * @brief Disable MDMA Channel x Transfer Error interrupt. |
| * @rmtoll CCR TEIE LL_MDMA_DisableIT_TE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableIT_TE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TEIE); |
| } |
| |
| /** |
| * @brief Disable MDMA Channel x Channel Transfer Complete interrupt. |
| * @rmtoll CCR CTCIE LL_MDMA_DisableIT_CTC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableIT_CTC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_CTCIE); |
| } |
| |
| /** |
| * @brief Disable MDMA Channel x Block Repeat Transfer interrupt. |
| * @rmtoll CCR BRTIE LL_MDMA_DisableIT_BRT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableIT_BRT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BRTIE); |
| } |
| |
| /** |
| * @brief Disable MDMA Channel x Block Transfer interrupt. |
| * @rmtoll CCR BTIE LL_MDMA_DisableIT_BT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableIT_BT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BTIE); |
| } |
| |
| /** |
| * @brief Disable MDMA Channel x buffer transfer complete interrupt. |
| * @rmtoll CCR TCIE LL_MDMA_DisableIT_TC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_MDMA_DisableIT_TC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| CLEAR_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TCIE); |
| } |
| |
| /** |
| * @brief Check if MDMA Channel x Transfer Error interrupt is enabled. |
| * @rmtoll CCR TEIE LL_MDMA_IsEnabledIT_TE |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledIT_TE(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TEIE) == MDMA_CCR_TEIE) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if MDMA Channel x Channel Transfer Complete interrupt is enabled. |
| * @rmtoll CCR CTCIE LL_MDMA_IsEnabledIT_CTC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledIT_CTC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_CTCIE) == MDMA_CCR_CTCIE) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if MDMA Channel x Block Repeat Transfer complete interrupt is enabled. |
| * @rmtoll CCR BRTIE LL_MDMA_IsEnabledIT_BRT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledIT_BRT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BRTIE) == MDMA_CCR_BRTIE) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if MDMA Channel x Block Transfer interrupt is enabled. |
| * @rmtoll CCR BTIE LL_MDMA_IsEnabledIT_BT |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledIT_BT(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_BTIE) == MDMA_CCR_BTIE) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if MDMA Channel x buffer transfer complete interrupt is enabled. |
| * @rmtoll CCR TCIE LL_MDMA_IsEnabledIT_TC |
| * @param MDMAx MDMAx Instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_MDMA_CHANNEL_0 |
| * @arg @ref LL_MDMA_CHANNEL_1 |
| * @arg @ref LL_MDMA_CHANNEL_2 |
| * @arg @ref LL_MDMA_CHANNEL_3 |
| * @arg @ref LL_MDMA_CHANNEL_4 |
| * @arg @ref LL_MDMA_CHANNEL_5 |
| * @arg @ref LL_MDMA_CHANNEL_6 |
| * @arg @ref LL_MDMA_CHANNEL_7 |
| * @arg @ref LL_MDMA_CHANNEL_8 |
| * @arg @ref LL_MDMA_CHANNEL_9 |
| * @arg @ref LL_MDMA_CHANNEL_10 |
| * @arg @ref LL_MDMA_CHANNEL_11 |
| * @arg @ref LL_MDMA_CHANNEL_12 |
| * @arg @ref LL_MDMA_CHANNEL_13 |
| * @arg @ref LL_MDMA_CHANNEL_14 |
| * @arg @ref LL_MDMA_CHANNEL_15 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_MDMA_IsEnabledIT_TC(MDMA_TypeDef *MDMAx, uint32_t Channel) |
| { |
| uint32_t mdma_base_addr = (uint32_t)MDMAx; |
| |
| return ((READ_BIT(((MDMA_Channel_TypeDef*)(mdma_base_addr + LL_MDMA_CH_OFFSET_TAB[Channel]))->CCR ,MDMA_CCR_TCIE) == MDMA_CCR_TCIE) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup MDMA_LL_EF_Init Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| uint32_t LL_MDMA_Init(MDMA_TypeDef *MDMAx, uint32_t Channel, LL_MDMA_InitTypeDef *MDMA_InitStruct); |
| uint32_t LL_MDMA_DeInit(MDMA_TypeDef *MDMAx, uint32_t Channel); |
| void LL_MDMA_StructInit(LL_MDMA_InitTypeDef *MDMA_InitStruct); |
| void LL_MDMA_CreateLinkNode(LL_MDMA_InitTypeDef *MDMA_InitStruct, LL_MDMA_LinkNodeTypeDef *pNode); |
| void LL_MDMA_ConnectLinkNode(LL_MDMA_LinkNodeTypeDef *pPrevLinkNode, LL_MDMA_LinkNodeTypeDef *pNewLinkNode); |
| void LL_MDMA_DisconnectNextLinkNode(LL_MDMA_LinkNodeTypeDef *pLinkNode); |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* MDMA */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_LL_MDMA_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
