| /** |
| ****************************************************************************** |
| * @file stm32h7xx_hal_nand.h |
| * @author MCD Application Team |
| * @brief Header file of NAND HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_HAL_NAND_H |
| #define STM32H7xx_HAL_NAND_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx_ll_fmc.h" |
| |
| /** @addtogroup STM32H7xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup NAND |
| * @{ |
| */ |
| |
| /* Exported typedef ----------------------------------------------------------*/ |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup NAND_Exported_Types NAND Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief HAL NAND State structures definition |
| */ |
| typedef enum |
| { |
| HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */ |
| HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */ |
| HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */ |
| HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */ |
| } HAL_NAND_StateTypeDef; |
| |
| /** |
| * @brief NAND Memory electronic signature Structure definition |
| */ |
| typedef struct |
| { |
| /*<! NAND memory electronic signature maker and device IDs */ |
| |
| uint8_t Maker_Id; |
| |
| uint8_t Device_Id; |
| |
| uint8_t Third_Id; |
| |
| uint8_t Fourth_Id; |
| } NAND_IDTypeDef; |
| |
| /** |
| * @brief NAND Memory address Structure definition |
| */ |
| typedef struct |
| { |
| uint16_t Page; /*!< NAND memory Page address */ |
| |
| uint16_t Plane; /*!< NAND memory Zone address */ |
| |
| uint16_t Block; /*!< NAND memory Block address */ |
| |
| } NAND_AddressTypeDef; |
| |
| /** |
| * @brief NAND Memory info Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes |
| for 8 bits addressing or words for 16 bits addressing */ |
| |
| uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes |
| for 8 bits addressing or words for 16 bits addressing */ |
| |
| uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */ |
| |
| uint32_t BlockNbr; /*!< NAND memory number of total blocks */ |
| |
| uint32_t PlaneNbr; /*!< NAND memory number of planes */ |
| |
| uint32_t PlaneSize; /*!< NAND memory zone size measured in number of blocks */ |
| |
| FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This |
| parameter is mandatory for some NAND parts after the read |
| command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence. |
| Example: Toshiba THTH58BYG3S0HBAI6. |
| This parameter could be ENABLE or DISABLE |
| Please check the Read Mode sequnece in the NAND device datasheet */ |
| } NAND_DeviceConfigTypeDef; |
| |
| /** |
| * @brief NAND handle Structure definition |
| */ |
| #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) |
| typedef struct __NAND_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ |
| { |
| FMC_NAND_TypeDef *Instance; /*!< Register base address */ |
| |
| FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ |
| |
| HAL_LockTypeDef Lock; /*!< NAND locking object */ |
| |
| __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */ |
| |
| NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */ |
| |
| #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) |
| void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp Init callback */ |
| void (* MspDeInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp DeInit callback */ |
| void (* ItCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND IT callback */ |
| #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ |
| } NAND_HandleTypeDef; |
| |
| #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL NAND Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_NAND_MSP_INIT_CB_ID = 0x00U, /*!< NAND MspInit Callback ID */ |
| HAL_NAND_MSP_DEINIT_CB_ID = 0x01U, /*!< NAND MspDeInit Callback ID */ |
| HAL_NAND_IT_CB_ID = 0x02U /*!< NAND IT Callback ID */ |
| } HAL_NAND_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL NAND Callback pointer definition |
| */ |
| typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand); |
| #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup NAND_Exported_Macros NAND Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset NAND handle state |
| * @param __HANDLE__ specifies the NAND handle. |
| * @retval None |
| */ |
| #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) |
| #define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_NAND_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) |
| #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup NAND_Exported_Functions NAND Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| /* Initialization/de-initialization functions ********************************/ |
| HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, |
| FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); |
| HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); |
| |
| HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig); |
| |
| HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); |
| |
| void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); |
| void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); |
| void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); |
| void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions |
| * @{ |
| */ |
| |
| /* IO operation functions ****************************************************/ |
| HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); |
| |
| HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, |
| uint32_t NumPageToRead); |
| HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, |
| uint32_t NumPageToWrite); |
| HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, |
| uint8_t *pBuffer, uint32_t NumSpareAreaToRead); |
| HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, |
| uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); |
| |
| HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, |
| uint32_t NumPageToRead); |
| HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, |
| uint32_t NumPageToWrite); |
| HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, |
| uint16_t *pBuffer, uint32_t NumSpareAreaToRead); |
| HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, |
| uint16_t *pBuffer, uint32_t NumSpareAreaTowrite); |
| |
| HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); |
| |
| uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); |
| |
| #if (USE_HAL_NAND_REGISTER_CALLBACKS == 1) |
| /* NAND callback registering/unregistering */ |
| HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, |
| pNAND_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId); |
| #endif /* USE_HAL_NAND_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions |
| * @{ |
| */ |
| |
| /* NAND Control functions ****************************************************/ |
| HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); |
| HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); |
| HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions |
| * @{ |
| */ |
| /* NAND State functions *******************************************************/ |
| HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand); |
| uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup NAND_Private_Constants NAND Private Constants |
| * @{ |
| */ |
| #define NAND_DEVICE 0x80000000UL |
| #define NAND_WRITE_TIMEOUT 0x01000000UL |
| |
| #define CMD_AREA (1UL<<16U) /* A16 = CLE high */ |
| #define ADDR_AREA (1UL<<17U) /* A17 = ALE high */ |
| |
| #define NAND_CMD_AREA_A ((uint8_t)0x00) |
| #define NAND_CMD_AREA_B ((uint8_t)0x01) |
| #define NAND_CMD_AREA_C ((uint8_t)0x50) |
| #define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) |
| |
| #define NAND_CMD_WRITE0 ((uint8_t)0x80) |
| #define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) |
| #define NAND_CMD_ERASE0 ((uint8_t)0x60) |
| #define NAND_CMD_ERASE1 ((uint8_t)0xD0) |
| #define NAND_CMD_READID ((uint8_t)0x90) |
| #define NAND_CMD_STATUS ((uint8_t)0x70) |
| #define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) |
| #define NAND_CMD_RESET ((uint8_t)0xFF) |
| |
| /* NAND memory status */ |
| #define NAND_VALID_ADDRESS 0x00000100UL |
| #define NAND_INVALID_ADDRESS 0x00000200UL |
| #define NAND_TIMEOUT_ERROR 0x00000400UL |
| #define NAND_BUSY 0x00000000UL |
| #define NAND_ERROR 0x00000001UL |
| #define NAND_READY 0x00000040UL |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup NAND_Private_Macros NAND Private Macros |
| * @{ |
| */ |
| |
| /** |
| * @brief NAND memory address computation. |
| * @param __ADDRESS__ NAND memory address. |
| * @param __HANDLE__ NAND handle. |
| * @retval NAND Raw address value |
| */ |
| #define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ |
| (((__ADDRESS__)->Block + \ |
| (((__ADDRESS__)->Plane) * \ |
| ((__HANDLE__)->Config.PlaneSize))) * \ |
| ((__HANDLE__)->Config.BlockSize))) |
| |
| /** |
| * @brief NAND memory Column address computation. |
| * @param __HANDLE__ NAND handle. |
| * @retval NAND Raw address value |
| */ |
| #define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize) |
| |
| /** |
| * @brief NAND memory address cycling. |
| * @param __ADDRESS__ NAND memory address. |
| * @retval NAND address cycling value. |
| */ |
| #define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ |
| #define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ |
| #define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ |
| #define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ |
| |
| /** |
| * @brief NAND memory Columns cycling. |
| * @param __ADDRESS__ NAND memory address. |
| * @retval NAND Column address cycling value. |
| */ |
| #define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) & 0xFFU) /* 1st Column addressing cycle */ |
| #define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_HAL_NAND_H */ |
