blob: cd0c2b795ee96b32c5e75f99a7513cef377496a2 [file] [log] [blame]
/**
******************************************************************************
* @file stm32h7xx_hal_crc.h
* @author MCD Application Team
* @brief Header file of CRC HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_CRC_H
#define STM32H7xx_HAL_CRC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup CRC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CRC_Exported_Types CRC Exported Types
* @{
*/
/**
* @brief CRC HAL State Structure definition
*/
typedef enum
{
HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */
HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */
HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */
HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */
HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */
} HAL_CRC_StateTypeDef;
/**
* @brief CRC Init Structure definition
*/
typedef struct
{
uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 +
X^4 + X^2+ X +1.
In that case, there is no need to set GeneratingPolynomial field.
If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and
CRCLength fields must be set. */
uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
0xFFFFFFFF value. In that case, there is no need to set InitValue field. If
otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
respectively equal to 7, 8, 16 or 32. This field is written in normal,
representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1
is written 0x65. No need to specify it if DefaultPolynomialUse is set to
DEFAULT_POLYNOMIAL_ENABLE. */
uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
Value can be either one of
@arg @ref CRC_POLYLENGTH_32B (32-bit CRC),
@arg @ref CRC_POLYLENGTH_16B (16-bit CRC),
@arg @ref CRC_POLYLENGTH_8B (8-bit CRC),
@arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */
uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
is set to DEFAULT_INIT_VALUE_ENABLE. */
uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
Can be either one of the following values
@arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion
@arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D
becomes 0x58D43CB2
@arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion,
0x1A2B3C4D becomes 0xD458B23C
@arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D
becomes 0xB23CD458 */
uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
Can be either
@arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion,
@arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted
into 0x22CC4488 */
} CRC_InitTypeDef;
/**
* @brief CRC Handle Structure definition
*/
typedef struct
{
CRC_TypeDef *Instance; /*!< Register base address */
CRC_InitTypeDef Init; /*!< CRC configuration parameters */
HAL_LockTypeDef Lock; /*!< CRC Locking object */
__IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
Can be either
@arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes
(8-bit data)
@arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of
half-words (16-bit data)
@arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words
(32-bit data)
Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization
error must occur if InputBufferFormat is not one of the three values listed
above */
} CRC_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRC_Exported_Constants CRC Exported Constants
* @{
*/
/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
* @{
*/
#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */
/**
* @}
*/
/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
* @{
*/
#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */
/**
* @}
*/
/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
* @{
*/
#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */
#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */
/**
* @}
*/
/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
* @{
*/
#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */
#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */
/**
* @}
*/
/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral
* @{
*/
#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */
#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */
#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */
#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */
/**
* @}
*/
/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
* @{
*/
#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */
#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */
#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */
#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */
/**
* @}
*/
/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
* @{
*/
/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
* an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
* to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
* the CRC APIs to provide a correct result */
#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */
#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */
#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */
#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup CRC_Exported_Macros CRC Exported Macros
* @{
*/
/** @brief Reset CRC handle state.
* @param __HANDLE__ CRC handle.
* @retval None
*/
#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
/**
* @brief Reset CRC Data Register.
* @param __HANDLE__ CRC handle
* @retval None
*/
#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
/**
* @brief Set CRC INIT non-default value
* @param __HANDLE__ CRC handle
* @param __INIT__ 32-bit initial value
* @retval None
*/
#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
/**
* @brief Store data in the Independent Data (ID) register.
* @param __HANDLE__ CRC handle
* @param __VALUE__ Value to be stored in the ID register
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
* @retval None
*/
#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
/**
* @brief Return the data stored in the Independent Data (ID) register.
* @param __HANDLE__ CRC handle
* @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits
* @retval Value of the ID register
*/
#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @defgroup CRC_Private_Macros CRC Private Macros
* @{
*/
#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
((LENGTH) == CRC_POLYLENGTH_16B) || \
((LENGTH) == CRC_POLYLENGTH_8B) || \
((LENGTH) == CRC_POLYLENGTH_7B))
#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
/**
* @}
*/
/* Include CRC HAL Extended module */
#include "stm32h7xx_hal_crc_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRC_Exported_Functions CRC Exported Functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
/**
* @}
*/
/* Peripheral Control functions ***********************************************/
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
* @{
*/
uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
/**
* @}
*/
/* Peripheral State and Error functions ***************************************/
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
* @{
*/
HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_CRC_H */