Google Git
Sign in
pigweed / third_party / github / STMicroelectronics / stm32h7xx_hal_driver / 7d7c53a49dbf527a331697d8833dd8dc0862556c / . / Inc / stm32h7xx_ll_exti.h
blob: be46b247ecc6062d3b338bf82f92f3474dffaa46 [file] [log] [blame]
/**
******************************************************************************
* @file stm32h7xx_ll_exti.h
* @author MCD Application Team
* @brief Header file of EXTI LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32H7xx_LL_EXTI_H
#define __STM32H7xx_LL_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx.h"
/** @addtogroup STM32H7xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private Macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure
* @{
*/
typedef struct
{
uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
uint32_t Line_64_95; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 64 to 95
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
uint8_t Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_MODE. */
uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */
} LL_EXTI_InitTypeDef;
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants
* @{
*/
/** @defgroup EXTI_LL_EC_LINE LINE
* @{
*/
#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */
#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */
#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */
#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */
#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */
#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */
#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */
#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */
#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */
#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */
#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */
#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */
#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */
#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */
#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */
#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */
#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */
#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */
#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */
#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */
#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */
#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */
#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */
#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */
#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */
#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */
#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */
#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */
#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */
#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */
#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */
#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/
#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */
#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */
#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */
#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */
#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */
#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */
#define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */
#if defined(USB2_OTG_FS)
#define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */
#endif /* USB2_OTG_FS */
#if defined(DSI)
#define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */
#endif /* DSI */
#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */
#define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */
#define LL_EXTI_LINE_49 EXTI_IMR2_IM49 /*!< Extended line 49 */
#define LL_EXTI_LINE_50 EXTI_IMR2_IM50 /*!< Extended line 50 */
#define LL_EXTI_LINE_51 EXTI_IMR2_IM51 /*!< Extended line 51 */
#define LL_EXTI_LINE_52 EXTI_IMR2_IM52 /*!< Extended line 52 */
#define LL_EXTI_LINE_53 EXTI_IMR2_IM53 /*!< Extended line 53 */
#define LL_EXTI_LINE_54 EXTI_IMR2_IM54 /*!< Extended line 54 */
#define LL_EXTI_LINE_55 EXTI_IMR2_IM55 /*!< Extended line 55 */
#define LL_EXTI_LINE_56 EXTI_IMR2_IM56 /*!< Extended line 56 */
#define LL_EXTI_LINE_57 EXTI_IMR2_IM57 /*!< Extended line 57 */
#define LL_EXTI_LINE_58 EXTI_IMR2_IM58 /*!< Extended line 58 */
#define LL_EXTI_LINE_59 EXTI_IMR2_IM59 /*!< Extended line 59 */
#define LL_EXTI_LINE_60 EXTI_IMR2_IM60 /*!< Extended line 60 */
#define LL_EXTI_LINE_61 EXTI_IMR2_IM61 /*!< Extended line 61 */
#define LL_EXTI_LINE_62 EXTI_IMR2_IM62 /*!< Extended line 62 */
#define LL_EXTI_LINE_63 EXTI_IMR2_IM63 /*!< Extended line 63 */
#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/
#define LL_EXTI_LINE_64 EXTI_IMR3_IM64 /*!< Extended line 64 */
#define LL_EXTI_LINE_65 EXTI_IMR3_IM65 /*!< Extended line 65 */
#define LL_EXTI_LINE_66 EXTI_IMR3_IM66 /*!< Extended line 66 */
#define LL_EXTI_LINE_67 EXTI_IMR3_IM67 /*!< Extended line 67 */
#define LL_EXTI_LINE_68 EXTI_IMR3_IM68 /*!< Extended line 68 */
#define LL_EXTI_LINE_69 EXTI_IMR3_IM69 /*!< Extended line 69 */
#define LL_EXTI_LINE_70 EXTI_IMR3_IM70 /*!< Extended line 70 */
#define LL_EXTI_LINE_71 EXTI_IMR3_IM71 /*!< Extended line 71 */
#define LL_EXTI_LINE_72 EXTI_IMR3_IM72 /*!< Extended line 72 */
#define LL_EXTI_LINE_73 EXTI_IMR3_IM73 /*!< Extended line 73 */
#define LL_EXTI_LINE_74 EXTI_IMR3_IM74 /*!< Extended line 74 */
#if defined(ADC3)
#define LL_EXTI_LINE_75 EXTI_IMR3_IM75 /*!< Extended line 75 */
#endif /* ADC3 */
#if defined(SAI4)
#define LL_EXTI_LINE_76 EXTI_IMR3_IM76 /*!< Extended line 76 */
#endif /* SAI4 */
#if defined(DUAL_CORE)
#define LL_EXTI_LINE_77 EXTI_IMR3_IM77 /*!< Extended line 77 */
#define LL_EXTI_LINE_78 EXTI_IMR3_IM78 /*!< Extended line 78 */
#define LL_EXTI_LINE_79 EXTI_IMR3_IM79 /*!< Extended line 79 */
#define LL_EXTI_LINE_80 EXTI_IMR3_IM80 /*!< Extended line 80 */
#define LL_EXTI_LINE_82 EXTI_IMR3_IM82 /*!< Extended line 82 */
#define LL_EXTI_LINE_84 EXTI_IMR3_IM84 /*!< Extended line 84 */
#endif /* DUAL_CORE */
#define LL_EXTI_LINE_85 EXTI_IMR3_IM85 /*!< Extended line 85 */
#if defined(ETH)
#define LL_EXTI_LINE_86 EXTI_IMR3_IM86 /*!< Extended line 86 */
#endif /* ETH */
#define LL_EXTI_LINE_87 EXTI_IMR3_IM87 /*!< Extended line 87 */
#if defined(DTS)
#define LL_EXTI_LINE_88 EXTI_IMR3_IM88 /*!< Extended line 87 */
#endif /* DTS */
#define LL_EXTI_LINE_ALL_64_95 EXTI_IMR3_IM /*!< All Extended line not reserved*/
#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */
#if defined(USE_FULL_LL_DRIVER)
#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EC_MODE Mode
* @{
*/
#define LL_EXTI_MODE_IT ((uint8_t)0x01U) /*!< Cortex-M7 Interrupt Mode */
#define LL_EXTI_MODE_EVENT ((uint8_t)0x02U) /*!< Cortex-M7 Event Mode */
#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x03U) /*!< Cortex-M7 Interrupt & Event Mode */
#if defined(DUAL_CORE)
#define LL_EXTI_MODE_C1_IT LL_EXTI_MODE_IT /*!< Cortex-M7 Interrupt Mode */
#define LL_EXTI_MODE_C1_EVENT LL_EXTI_MODE_EVENT /*!< Cortex-M7 Event Mode */
#define LL_EXTI_MODE_C1_IT_EVENT LL_EXTI_MODE_IT_EVENT /*!< Cortex-M7 Interrupt & Event Mode */
#define LL_EXTI_MODE_C2_IT ((uint8_t)0x10U) /*!< Cortex-M4 Interrupt Mode */
#define LL_EXTI_MODE_C2_EVENT ((uint8_t)0x20U) /*!< Cortex-M4 Event Mode */
#define LL_EXTI_MODE_C2_IT_EVENT ((uint8_t)0x30U) /*!< Cortex-M4 Interrupt & Event Mode */
#endif /* DUAL_CORE */
/**
* @}
*/
/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger
* @{
*/
#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */
#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */
#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */
#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */
/**
* @}
*/
/** @defgroup EXTI_LL_D3_PEND_CLR D3 Pend Clear Source
* @{
*/
#define LL_EXTI_D3_PEND_CLR_DMACH6 ((uint8_t)0x00U) /*!< DMA ch6 event selected as D3 domain pendclear source */
#define LL_EXTI_D3_PEND_CLR_DMACH7 ((uint8_t)0x01U) /*!< DMA ch7 event selected as D3 domain pendclear source */
#if defined (LPTIM4)
#define LL_EXTI_D3_PEND_CLR_LPTIM4 ((uint8_t)0x02U) /*!< LPTIM4 out selected as D3 domain pendclear source */
#else
#define LL_EXTI_D3_PEND_CLR_LPTIM2 ((uint8_t)0x02U) /*!< LPTIM2 out selected as D3 domain pendclear source */
#endif /*LPTIM4*/
#if defined (LPTIM5)
#define LL_EXTI_D3_PEND_CLR_LPTIM5 ((uint8_t)0x03U) /*!< LPTIM5 out selected as D3 domain pendclear source */
#else
#define LL_EXTI_D3_PEND_CLR_LPTIM3 ((uint8_t)0x02U) /*!< LPTIM3 out selected as D3 domain pendclear source */
#endif /*LPTIM5*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros
* @{
*/
/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in EXTI register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__))
/**
* @brief Read a value in EXTI register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions
* @{
*/
/** @defgroup EXTI_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31
* @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95
* @rmtoll IMR3 IMx LL_EXTI_EnableIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableIT_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->IMR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
* @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95
* @rmtoll IMR3 IMx LL_EXTI_DisableIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableIT_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->IMR3, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
* @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63
* @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95
* @rmtoll IMR3 IMx LL_EXTI_IsEnabledIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
#if defined(DUAL_CORE)
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2
* @rmtoll C2IMR1 IMx LL_C2_EXTI_EnableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2IMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2
* @rmtoll C2IMR2 IMx LL_C2_EXTI_EnableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2IMR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95
* @rmtoll C2IMR3 IMx LL_C2_EXTI_EnableIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableIT_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2IMR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2
* @rmtoll C2IMR1 IMx LL_C2_EXTI_DisableIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2IMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2
* @rmtoll C2IMR2 IMx LL_C2_EXTI_DisableIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2IMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 for cpu2
* @rmtoll C2IMR3 IMx LL_C2_EXTI_DisableIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableIT_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2IMR3, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 for cpu2
* @rmtoll C2IMR1 IMx LL_C2_EXTI_IsEnabledIT_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 for cpu2
* @rmtoll C2IMR2 IMx LL_C2_EXTI_IsEnabledIT_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2IMR2, ExtiLine) == (ExtiLine))? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95
* @rmtoll C2IMR3 IMx LL_C2_EXTI_IsEnabledIT_64_95
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
#endif /* DUAL_CORE */
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Event_Management Event_Management
* @{
*/
/**
* @brief Enable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Event request for Lines in range 64 to 95
* @rmtoll EMR3 EMx LL_EXTI_EnableEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableEvent_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->EMR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 64 to 95
* @rmtoll EMR3 EMx LL_EXTI_DisableEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableEvent_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->EMR3, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63
* @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95
* @rmtoll EMR3 EMx LL_EXTI_IsEnabledEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
#if defined(DUAL_CORE)
/**
* @brief Enable ExtiLine Event request for Lines in range 0 to 31 for cpu2
* @rmtoll C2EMR1 EMx LL_C2_EXTI_EnableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableEvent_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2EMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Event request for Lines in range 32 to 63 for cpu2
* @rmtoll C2EMR2 EMx LL_C2_EXTI_EnableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2EMR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Event request for Lines in range 64 to 95 for cpu2
* @rmtoll C2EMR3 EMx LL_C2_EXTI_EnableEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_EnableEvent_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->C2EMR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31 for cpu2
* @rmtoll C2EMR1 EMx LL_C2_EXTI_DisableEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableEvent_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2EMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 32 to 63 for cpu2
* @rmtoll C2EMR2 EMx LL_C2_EXTI_DisableEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2EMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Event request for Lines in range 64 to 95 for cpu2
* @rmtoll C2EMR3 EMx LL_C2_EXTI_DisableEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_DisableEvent_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->C2EMR3, ExtiLine);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 for cpu2
* @rmtoll C2EMR1 EMx LL_C2_EXTI_IsEnabledEvent_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_22
* @arg @ref LL_EXTI_LINE_23
* @arg @ref LL_EXTI_LINE_24
* @arg @ref LL_EXTI_LINE_25
* @arg @ref LL_EXTI_LINE_26
* @arg @ref LL_EXTI_LINE_27
* @arg @ref LL_EXTI_LINE_28
* @arg @ref LL_EXTI_LINE_29
* @arg @ref LL_EXTI_LINE_30
* @arg @ref LL_EXTI_LINE_31
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 for cpu2
* @rmtoll C2EMR2 EMx LL_C2_EXTI_IsEnabledEvent_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_32
* @arg @ref LL_EXTI_LINE_33
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_36
* @arg @ref LL_EXTI_LINE_37
* @arg @ref LL_EXTI_LINE_38
* @arg @ref LL_EXTI_LINE_39
* @arg @ref LL_EXTI_LINE_40
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_42
* @arg @ref LL_EXTI_LINE_43
* @arg @ref LL_EXTI_LINE_44
* @arg @ref LL_EXTI_LINE_46
* @arg @ref LL_EXTI_LINE_47
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @arg @ref LL_EXTI_LINE_54
* @arg @ref LL_EXTI_LINE_55
* @arg @ref LL_EXTI_LINE_56
* @arg @ref LL_EXTI_LINE_57
* @arg @ref LL_EXTI_LINE_58
* @arg @ref LL_EXTI_LINE_59
* @arg @ref LL_EXTI_LINE_60
* @arg @ref LL_EXTI_LINE_61
* @arg @ref LL_EXTI_LINE_62
* @arg @ref LL_EXTI_LINE_63
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 for cpu2
* @rmtoll C2EMR3 EMx LL_C2_EXTI_IsEnabledEvent_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_64
* @arg @ref LL_EXTI_LINE_65
* @arg @ref LL_EXTI_LINE_66
* @arg @ref LL_EXTI_LINE_67
* @arg @ref LL_EXTI_LINE_68
* @arg @ref LL_EXTI_LINE_69
* @arg @ref LL_EXTI_LINE_70
* @arg @ref LL_EXTI_LINE_71
* @arg @ref LL_EXTI_LINE_72
* @arg @ref LL_EXTI_LINE_73
* @arg @ref LL_EXTI_LINE_74
* @arg @ref LL_EXTI_LINE_75
* @arg @ref LL_EXTI_LINE_76
* @arg @ref LL_EXTI_LINE_77
* @arg @ref LL_EXTI_LINE_78
* @arg @ref LL_EXTI_LINE_79
* @arg @ref LL_EXTI_LINE_80
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_87
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
#endif /* DUAL_CORE */
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Rising Edge Trigger for Lines in range 64 to 95
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR3 RTx LL_EXTI_EnableRisingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableRisingTrig_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->RTSR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 64 to 95
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a rising edge on a configurable interrupt
* line occurs during a write operation in the EXTI_RTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll RTSR3 RTx LL_EXTI_DisableRisingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableRisingTrig_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->RTSR3, ExtiLine);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
* @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 32 to 63
* @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if rising edge trigger is enabled for Lines in range 64 to 95
* @rmtoll RTSR3 RTx LL_EXTI_IsEnabledRisingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->RTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management
* @{
*/
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR1, ExtiLine);
}
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR2, ExtiLine);
}
/**
* @brief Enable ExtiLine Falling Edge Trigger for Lines in range 64 to 95
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for
* the same interrupt line. In this case, both generate a trigger
* condition.
* @rmtoll FTSR3 FTx LL_EXTI_EnableFallingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_EnableFallingTrig_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->FTSR3, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR1, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR2, ExtiLine);
}
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 64 to 95
* @note The configurable wakeup lines are edge-triggered. No glitch must be
* generated on these lines. If a Falling edge on a configurable interrupt
* line occurs during a write operation in the EXTI_FTSR register, the
* pending bit is not set.
* Rising and falling edge triggers can be set for the same interrupt line.
* In this case, both generate a trigger condition.
* @rmtoll FTSR3 FTx LL_EXTI_DisableFallingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_DisableFallingTrig_64_95(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->FTSR3, ExtiLine);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
* @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @note Please check each device line mapping for EXTI Line availability
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 32 to 63
* @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if falling edge trigger is enabled for Lines in range 64 to 95
* @rmtoll FTSR3 FTx LL_EXTI_IsEnabledFallingTrig_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->FTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management
* @{
*/
/**
* @brief Generate a software Interrupt Event for Lines in range 0 to 31
* @note If the interrupt is enabled on this line in the EXTI_C1IMR1, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR1
* register (by writing a 1 into the bit)
* @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @note Please check each device line mapping for EXTI Line availability
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER1, ExtiLine);
}
/**
* @brief Generate a software Interrupt Event for Lines in range 32 to 63
* @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR2
* register (by writing a 1 into the bit)
* @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER2, ExtiLine);
}
/**
* @brief Generate a software Interrupt Event for Lines in range 64 to 95
* @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to
* this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2
* resulting in an interrupt request generation.
* This bit is cleared by clearing the corresponding bit in the EXTI_PR3
* register (by writing a 1 into the bit)
* @rmtoll SWIER3 SWIx LL_EXTI_GenerateSWI_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_GenerateSWI_64_95(uint32_t ExtiLine)
{
SET_BIT(EXTI->SWIER3, ExtiLine);
}
/**
* @}
*/
/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management
* @{
*/
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR3 PIFx LL_EXTI_IsActiveFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 64 to 95
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR3 PIFx LL_EXTI_ReadFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_64_95(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->PR3, ExtiLine));
}
/**
* @brief Clear ExtLine Flags for Lines in range 0 to 31
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR1, ExtiLine);
}
/**
* @brief Clear ExtLine Flags for Lines in range 32 to 63
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR2, ExtiLine);
}
/**
* @brief Clear ExtLine Flags for Lines in range 64 to 95
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll PR3 PIFx LL_EXTI_ClearFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_EXTI_ClearFlag_64_95(uint32_t ExtiLine)
{
WRITE_REG(EXTI->PR3, ExtiLine);
}
#if defined(DUAL_CORE)
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR1 PIFx LL_C2_EXTI_IsActiveFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_ALL_0_31
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR2 PIFx LL_C2_EXTI_IsActiveFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_ALL_32_63
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR3 PIFx LL_C2_EXTI_IsActiveFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @arg @ref LL_EXTI_LINE_ALL_64_95
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->C2PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 0 to 31 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR1 PIFx LL_C2_EXTI_ReadFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_0_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->C2PR1, ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 32 to 63 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR2 PIFx LL_C2_EXTI_ReadFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_32_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->C2PR2, ExtiLine));
}
/**
* @brief Read ExtLine Combination Flag for Lines in range 64 to 95 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR3 PIFx LL_C2_EXTI_ReadFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval @note This bit is set when the selected edge event arrives on the interrupt
*/
__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_64_95(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->C2PR3, ExtiLine));
}
/**
* @brief Clear ExtLine Flags for Lines in range 0 to 31 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR1 PIFx LL_C2_EXTI_ClearFlag_0_31
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_16
* @arg @ref LL_EXTI_LINE_17
* @arg @ref LL_EXTI_LINE_18
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_ClearFlag_0_31(uint32_t ExtiLine)
{
WRITE_REG(EXTI->C2PR1, ExtiLine);
}
/**
* @brief Clear ExtLine Flags for Lines in range 32 to 63 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR2 PIFx LL_C2_EXTI_ClearFlag_32_63
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_51
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_ClearFlag_32_63(uint32_t ExtiLine)
{
WRITE_REG(EXTI->C2PR2, ExtiLine);
}
/**
* @brief Clear ExtLine Flags for Lines in range 64 to 95 for cpu2
* @note This bit is set when the selected edge event arrives on the interrupt
* line. This bit is cleared by writing a 1 to the bit.
* @rmtoll C2PR3 PIFx LL_C2_EXTI_ClearFlag_64_95
* @param ExtiLine This parameter can be a combination of the following values:
* @arg @ref LL_EXTI_LINE_82
* @arg @ref LL_EXTI_LINE_84
* @arg @ref LL_EXTI_LINE_85
* @arg @ref LL_EXTI_LINE_86
* @retval None
*/
__STATIC_INLINE void LL_C2_EXTI_ClearFlag_64_95(uint32_t ExtiLine)
{
WRITE_REG(EXTI->C2PR3, ExtiLine);
}
#endif /* DUAL_CORE */
/**
* @brief Enable ExtiLine D3 Pending Mask for Lines in range 0 to 31
* @rmtoll D3PMR1 MRx LL_D3_EXTI_EnablePendMask_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_25
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_0_31(uint32_t ExtiLine)
{
SET_BIT(EXTI->D3PMR1, ExtiLine);
}
/**
* @brief Enable ExtiLine D3 Pending Mask for Lines in range 32 to 63
* @rmtoll D3PMR2 MRx LL_D3_EXTI_EnablePendMask_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_32_63(uint32_t ExtiLine)
{
SET_BIT(EXTI->D3PMR2, ExtiLine);
}
/**
* @brief Disable ExtiLine D3 Pending Mask for Lines in range 0 to 31
* @rmtoll D3PMR1 MRx LL_D3_EXTI_DisablePendMask_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_25
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_0_31(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->D3PMR1, ExtiLine);
}
/**
* @brief Disable ExtiLine D3 Pending Mask for Lines in range 32 to 63
* @rmtoll D3PMR2 MRx LL_D3_EXTI_DisablePendMask_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_32_63(uint32_t ExtiLine)
{
CLEAR_BIT(EXTI->D3PMR2, ExtiLine);
}
/**
* @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 0 to 31
* @rmtoll D3PMR1 MRx LL_D3_EXTI_IsEnabledPendMask_0_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_25
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_0_31(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->D3PMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 32 to 63
* @rmtoll D3PMR2 MRx LL_D3_EXTI_IsEnabledPendMask_32_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_41
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_32_63(uint32_t ExtiLine)
{
return ((READ_BIT(EXTI->D3PMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U);
}
/**
* @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15
* @rmtoll D3PCR1L PCSx LL_D3_EXTI_SetPendClearSel_0_15
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @param ClrSrc This parameter can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_0_15(uint32_t ExtiLine, uint32_t ClrSrc)
{
MODIFY_REG(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc));
}
/**
* @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31
* @rmtoll D3PCR1H PCSx LL_D3_EXTI_SetPendClearSel_16_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_25
* @param ClrSrc This parameter can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_16_31(uint32_t ExtiLine, uint32_t ClrSrc)
{
MODIFY_REG(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * ClrSrc));
}
/**
* @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47
* @rmtoll D3PCR2L PCSx LL_D3_EXTI_SetPendClearSel_32_47
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_41
* @param ClrSrc This parameter can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_32_47(uint32_t ExtiLine, uint32_t ClrSrc)
{
MODIFY_REG(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc));
}
/**
* @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63
* @rmtoll D3PCR2H PCSx LL_D3_EXTI_SetPendClearSel_48_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @param ClrSrc This parameter can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
* @retval None
*/
__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_48_63(uint32_t ExtiLine, uint32_t ClrSrc)
{
MODIFY_REG(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * ClrSrc));
}
/**
* @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15
* @rmtoll D3PCR1L PCSx LL_D3_EXTI_GetPendClearSel_0_15
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_0
* @arg @ref LL_EXTI_LINE_1
* @arg @ref LL_EXTI_LINE_2
* @arg @ref LL_EXTI_LINE_3
* @arg @ref LL_EXTI_LINE_4
* @arg @ref LL_EXTI_LINE_5
* @arg @ref LL_EXTI_LINE_6
* @arg @ref LL_EXTI_LINE_7
* @arg @ref LL_EXTI_LINE_8
* @arg @ref LL_EXTI_LINE_9
* @arg @ref LL_EXTI_LINE_10
* @arg @ref LL_EXTI_LINE_11
* @arg @ref LL_EXTI_LINE_12
* @arg @ref LL_EXTI_LINE_13
* @arg @ref LL_EXTI_LINE_14
* @arg @ref LL_EXTI_LINE_15
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_0_15(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine));
}
/**
* @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31
* @rmtoll D3PCR1H PCSx LL_D3_EXTI_GetPendClearSel_16_31
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_19
* @arg @ref LL_EXTI_LINE_20
* @arg @ref LL_EXTI_LINE_21
* @arg @ref LL_EXTI_LINE_25
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_16_31(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)));
}
/**
* @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47
* @rmtoll D3PCR2L PCSx LL_D3_EXTI_GetPendClearSel_32_47
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_34
* @arg @ref LL_EXTI_LINE_35
* @arg @ref LL_EXTI_LINE_41
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_32_47(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine));
}
/**
* @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63
* @rmtoll D3PCR2H PCSx LL_D3_EXTI_GetPendClearSel_48_63
* @param ExtiLine This parameter can be one of the following values:
* @arg @ref LL_EXTI_LINE_48
* @arg @ref LL_EXTI_LINE_49
* @arg @ref LL_EXTI_LINE_50
* @arg @ref LL_EXTI_LINE_51
* @arg @ref LL_EXTI_LINE_52
* @arg @ref LL_EXTI_LINE_53
* @retval Returned value can be one of the following values:
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6
* @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4
* @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5
*/
__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_48_63(uint32_t ExtiLine)
{
return (uint32_t)(READ_BIT(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions
* @{,
*/
ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct);
ErrorStatus LL_EXTI_DeInit(void);
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* EXTI */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32H7xx_LL_EXTI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/