blob: 4180c713c3144e246d12e92cdf9f4d99786d6255 [file] [log] [blame]
/**
******************************************************************************
* @file stm32h7xx_hal_swpmi.h
* @author MCD Application Team
* @brief Header file of SWPMI HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_SWPMI_H
#define STM32H7xx_HAL_SWPMI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup SWPMI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SWPMI_Exported_Types SWPMI Exported Types
* @{
*/
/**
* @brief SWPMI Init Structure definition
*/
typedef struct
{
uint32_t VoltageClass; /*!< Specifies the SWP Voltage Class.
This parameter can be a value of @ref SWPMI_Voltage_Class */
uint32_t BitRate; /*!< Specifies the SWPMI Bitrate.
This parameter must be a number between 0 and 255U.
The Bitrate is computed using the following formula:
SWPMI_freq = SWPMI_clk / (((BitRate) + 1) * 4)
*/
uint32_t TxBufferingMode; /*!< Specifies the transmission buffering mode.
This parameter can be a value of @ref SWPMI_Tx_Buffering_Mode */
uint32_t RxBufferingMode; /*!< Specifies the reception buffering mode.
This parameter can be a value of @ref SWPMI_Rx_Buffering_Mode */
} SWPMI_InitTypeDef;
/**
* @brief HAL SWPMI State structures definition
*/
typedef enum
{
HAL_SWPMI_STATE_RESET = 0x00, /*!< Peripheral Reset state */
HAL_SWPMI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SWPMI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
HAL_SWPMI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
HAL_SWPMI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
HAL_SWPMI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
HAL_SWPMI_STATE_TIMEOUT = 0x03, /*!< Timeout state */
HAL_SWPMI_STATE_ERROR = 0x04 /*!< Error */
} HAL_SWPMI_StateTypeDef;
/**
* @brief SWPMI handle Structure definition
*/
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
typedef struct __SWPMI_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_SWPMI_REGISTER_CALLBACKS */
{
SWPMI_TypeDef *Instance; /*!< SWPMI registers base address */
SWPMI_InitTypeDef Init; /*!< SWPMI communication parameters */
uint32_t *pTxBuffPtr; /*!< Pointer to SWPMI Tx transfer Buffer */
uint32_t TxXferSize; /*!< SWPMI Tx Transfer size */
uint32_t TxXferCount; /*!< SWPMI Tx Transfer Counter */
uint32_t *pRxBuffPtr; /*!< Pointer to SWPMI Rx transfer Buffer */
uint32_t RxXferSize; /*!< SWPMI Rx Transfer size */
uint32_t RxXferCount; /*!< SWPMI Rx Transfer Counter */
DMA_HandleTypeDef *hdmatx; /*!< SWPMI Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< SWPMI Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /*!< SWPMI object */
__IO HAL_SWPMI_StateTypeDef State; /*!< SWPMI communication state */
__IO uint32_t ErrorCode; /*!< SWPMI Error code */
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
void (*RxCpltCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI receive complete callback */
void (*RxHalfCpltCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI receive half complete callback */
void (*TxCpltCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI transmit complete callback */
void (*TxHalfCpltCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI transmit half complete callback */
void (*ErrorCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI error callback */
void (*MspInitCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI MSP init callback */
void (*MspDeInitCallback)(struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI MSP de-init callback */
#endif
} SWPMI_HandleTypeDef;
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
/**
* @brief SWPMI callback ID enumeration definition
*/
typedef enum
{
HAL_SWPMI_RX_COMPLETE_CB_ID = 0x00U, /*!< SWPMI receive complete callback ID */
HAL_SWPMI_RX_HALFCOMPLETE_CB_ID = 0x01U, /*!< SWPMI receive half complete callback ID */
HAL_SWPMI_TX_COMPLETE_CB_ID = 0x02U, /*!< SWPMI transmit complete callback ID */
HAL_SWPMI_TX_HALFCOMPLETE_CB_ID = 0x03U, /*!< SWPMI transmit half complete callback ID */
HAL_SWPMI_ERROR_CB_ID = 0x04U, /*!< SWPMI error callback ID */
HAL_SWPMI_MSPINIT_CB_ID = 0x05U, /*!< SWPMI MSP init callback ID */
HAL_SWPMI_MSPDEINIT_CB_ID = 0x06U /*!< SWPMI MSP de-init callback ID */
} HAL_SWPMI_CallbackIDTypeDef;
/**
* @brief SWPMI callback pointer definition
*/
typedef void (*pSWPMI_CallbackTypeDef)(SWPMI_HandleTypeDef *hswpmi);
#endif
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SWPMI_Exported_Constants SWPMI Exported Constants
* @{
*/
/**
* @defgroup SWPMI_Error_Code SWPMI Error Code Bitmap
* @{
*/
#define HAL_SWPMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
#define HAL_SWPMI_ERROR_CRC ((uint32_t)0x00000004) /*!< frame error */
#define HAL_SWPMI_ERROR_OVR ((uint32_t)0x00000008) /*!< Overrun error */
#define HAL_SWPMI_ERROR_UDR ((uint32_t)0x0000000C) /*!< Underrun error */
#define HAL_SWPMI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
#define HAL_SWPMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Transfer timeout */
#define HAL_SWPMI_ERROR_TXBEF_TIMEOUT ((uint32_t)0x00000040) /*!< End Tx buffer timeout */
#define HAL_SWPMI_ERROR_TRANSCEIVER_NOT_READY ((uint32_t)0x00000080) /*!< Transceiver not ready */
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
#define HAL_SWPMI_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100) /*!< Invalid callback error */
#endif
/**
* @}
*/
/** @defgroup SWPMI_Voltage_Class SWPMI Voltage Class
* @{
*/
#define SWPMI_VOLTAGE_CLASS_C ((uint32_t)0x00000000)
#define SWPMI_VOLTAGE_CLASS_B SWPMI_OR_CLASS
/**
* @}
*/
/** @defgroup SWPMI_Tx_Buffering_Mode SWPMI Tx Buffering Mode
* @{
*/
#define SWPMI_TX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000)
#define SWPMI_TX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000)
#define SWPMI_TX_MULTI_SOFTWAREBUFFER SWPMI_CR_TXMODE
/**
* @}
*/
/** @defgroup SWPMI_Rx_Buffering_Mode SWPMI Rx Buffering Mode
* @{
*/
#define SWPMI_RX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000)
#define SWPMI_RX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000)
#define SWPMI_RX_MULTI_SOFTWAREBUFFER SWPMI_CR_RXMODE
/**
* @}
*/
/** @defgroup SWPMI_Flags SWPMI Status Flags
* Elements values convention: 0xXXXXXXXX
* - 0xXXXXXXXX : Flag mask in the ISR register
* @{
*/
#define SWPMI_FLAG_RXBFF SWPMI_ISR_RXBFF
#define SWPMI_FLAG_TXBEF SWPMI_ISR_TXBEF
#define SWPMI_FLAG_RXBERF SWPMI_ISR_RXBERF
#define SWPMI_FLAG_RXOVRF SWPMI_ISR_RXOVRF
#define SWPMI_FLAG_TXUNRF SWPMI_ISR_TXUNRF
#define SWPMI_FLAG_RXNE SWPMI_ISR_RXNE
#define SWPMI_FLAG_TXE SWPMI_ISR_TXE
#define SWPMI_FLAG_TCF SWPMI_ISR_TCF
#define SWPMI_FLAG_SRF SWPMI_ISR_SRF
#define SWPMI_FLAG_SUSP SWPMI_ISR_SUSP
#define SWPMI_FLAG_DEACTF SWPMI_ISR_DEACTF
#define SWPMI_FLAG_RDYF SWPMI_ISR_RDYF
/**
* @}
*/
/** @defgroup SWPMI_Interrupt_definition SWPMI Interrupts Definition
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the IER register
* @{
*/
#define SWPMI_IT_RDYIE SWPMI_IER_RDYIE
#define SWPMI_IT_SRIE SWPMI_IER_SRIE
#define SWPMI_IT_TCIE SWPMI_IER_TCIE
#define SWPMI_IT_TIE SWPMI_IER_TIE
#define SWPMI_IT_RIE SWPMI_IER_RIE
#define SWPMI_IT_TXUNRIE SWPMI_IER_TXUNRIE
#define SWPMI_IT_RXOVRIE SWPMI_IER_RXOVRIE
#define SWPMI_IT_RXBERIE SWPMI_IER_RXBERIE
#define SWPMI_IT_TXBEIE SWPMI_IER_TXBEIE
#define SWPMI_IT_RXBFIE SWPMI_IER_RXBFIE
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup SWPMI_Exported_Macros SWPMI Exported Macros
* @{
*/
/** @brief Reset SWPMI handle state.
* @param __HANDLE__ specifies the SWPMI Handle.
* @retval None
*/
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
#define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_SWPMI_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SWPMI_STATE_RESET)
#endif
/**
* @brief Enable the SWPMI peripheral.
* @param __HANDLE__ SWPMI handle
* @retval None
*/
#define __HAL_SWPMI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT)
/**
* @brief Disable the SWPMI peripheral.
* @param __HANDLE__ SWPMI handle
* @retval None
*/
#define __HAL_SWPMI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT)
/**
* @brief Enable the SWPMI transceiver.
* @param __HANDLE__ SWPMI handle
* @retval None
*/
#define __HAL_SWPMI_TRANSCEIVER_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPEN)
/**
* @brief Disable the SWPMI transceiver.
* @param __HANDLE__ SWPMI handle
* @retval None
*/
#define __HAL_SWPMI_TRANSCEIVER_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPEN)
/** @brief Check whether the specified SWPMI flag is set or not.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg SWPMI_FLAG_RXBFF Receive buffer full flag.
* @arg SWPMI_FLAG_TXBEF Transmit buffer empty flag.
* @arg SWPMI_FLAG_RXBERF Receive CRC error flag.
* @arg SWPMI_FLAG_RXOVRF Receive overrun error flag.
* @arg SWPMI_FLAG_TXUNRF Transmit underrun error flag.
* @arg SWPMI_FLAG_RXNE Receive data register not empty.
* @arg SWPMI_FLAG_TXE Transmit data register empty.
* @arg SWPMI_FLAG_TCF Transfer complete flag.
* @arg SWPMI_FLAG_SRF Slave resume flag.
* @arg SWPMI_FLAG_SUSP SUSPEND flag.
* @arg SWPMI_FLAG_DEACTF DEACTIVATED flag.
* @arg SWPMI_FLAG_RDYF Transceiver ready flag.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SWPMI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->ISR, (__FLAG__)) == (__FLAG__))
/** @brief Clear the specified SWPMI ISR flag.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be one of the following values:
* @arg SWPMI_FLAG_RXBFF Receive buffer full flag.
* @arg SWPMI_FLAG_TXBEF Transmit buffer empty flag.
* @arg SWPMI_FLAG_RXBERF Receive CRC error flag.
* @arg SWPMI_FLAG_RXOVRF Receive overrun error flag.
* @arg SWPMI_FLAG_TXUNRF Transmit underrun error flag.
* @arg SWPMI_FLAG_TCF Transfer complete flag.
* @arg SWPMI_FLAG_SRF Slave resume flag.
* @arg SWPMI_FLAG_RDYF Transceiver ready flag.
* @retval None
*/
#define __HAL_SWPMI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->ICR, (__FLAG__))
/** @brief Enable the specified SWPMI interrupt.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __INTERRUPT__ specifies the SWPMI interrupt source to enable.
* This parameter can be one of the following values:
* @arg SWPMI_IT_RDYIE Transceiver ready interrupt.
* @arg SWPMI_IT_SRIE Slave resume interrupt.
* @arg SWPMI_IT_TCIE Transmit complete interrupt.
* @arg SWPMI_IT_TIE Transmit interrupt.
* @arg SWPMI_IT_RIE Receive interrupt.
* @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt.
* @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt.
* @arg SWPMI_IT_RXBEIE Receive CRC error interrupt.
* @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt.
* @arg SWPMI_IT_RXBFIE Receive buffer full interrupt.
* @retval None
*/
#define __HAL_SWPMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__))
/** @brief Disable the specified SWPMI interrupt.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __INTERRUPT__ specifies the SWPMI interrupt source to disable.
* This parameter can be one of the following values:
* @arg SWPMI_IT_RDYIE Transceiver ready interrupt.
* @arg SWPMI_IT_SRIE Slave resume interrupt.
* @arg SWPMI_IT_TCIE Transmit complete interrupt.
* @arg SWPMI_IT_TIE Transmit interrupt.
* @arg SWPMI_IT_RIE Receive interrupt.
* @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt.
* @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt.
* @arg SWPMI_IT_RXBEIE Receive CRC error interrupt.
* @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt.
* @arg SWPMI_IT_RXBFIE Receive buffer full interrupt.
* @retval None
*/
#define __HAL_SWPMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__))
/** @brief Check whether the specified SWPMI interrupt has occurred or not.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __IT__ specifies the SWPMI interrupt to check.
* This parameter can be one of the following values:
* @arg SWPMI_IT_RDYIE Transceiver ready interrupt.
* @arg SWPMI_IT_SRIE Slave resume interrupt.
* @arg SWPMI_IT_TCIE Transmit complete interrupt.
* @arg SWPMI_IT_TIE Transmit interrupt.
* @arg SWPMI_IT_RIE Receive interrupt.
* @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt.
* @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt.
* @arg SWPMI_IT_RXBERIE Receive CRC error interrupt.
* @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt.
* @arg SWPMI_IT_RXBFIE Receive buffer full interrupt.
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SWPMI_GET_IT(__HANDLE__, __IT__) (READ_BIT((__HANDLE__)->Instance->ISR,(__IT__)) == (__IT__))
/** @brief Check whether the specified SWPMI interrupt source is enabled or not.
* @param __HANDLE__ specifies the SWPMI Handle.
* @param __IT__ specifies the SWPMI interrupt source to check.
* This parameter can be one of the following values:
* @arg SWPMI_IT_RDYIE Transceiver ready interrupt.
* @arg SWPMI_IT_SRIE Slave resume interrupt.
* @arg SWPMI_IT_TCIE Transmit complete interrupt.
* @arg SWPMI_IT_TIE Transmit interrupt.
* @arg SWPMI_IT_RIE Receive interrupt.
* @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt.
* @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt.
* @arg SWPMI_IT_RXBERIE Receive CRC error interrupt.
* @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt.
* @arg SWPMI_IT_RXBFIE Receive buffer full interrupt.
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SWPMI_GET_IT_SOURCE(__HANDLE__, __IT__) ((READ_BIT((__HANDLE__)->Instance->IER, (__IT__)) == (__IT__)) ? SET : RESET)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SWPMI_Exported_Functions SWPMI Exported Functions
* @{
*/
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_SWPMI_Init(SWPMI_HandleTypeDef *hswpmi);
HAL_StatusTypeDef HAL_SWPMI_DeInit(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_MspInit(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_MspDeInit(SWPMI_HandleTypeDef *hswpmi);
#if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1)
/* SWPMI callbacks register/unregister functions ********************************/
HAL_StatusTypeDef HAL_SWPMI_RegisterCallback(SWPMI_HandleTypeDef *hswpmi,
HAL_SWPMI_CallbackIDTypeDef CallbackID,
pSWPMI_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_SWPMI_UnRegisterCallback(SWPMI_HandleTypeDef *hswpmi,
HAL_SWPMI_CallbackIDTypeDef CallbackID);
#endif
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SWPMI_Receive(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SWPMI_Receive_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SWPMI_Receive_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SWPMI_DMAStop(SWPMI_HandleTypeDef *hswpmi);
HAL_StatusTypeDef HAL_SWPMI_EnableLoopback(SWPMI_HandleTypeDef *hswpmi);
HAL_StatusTypeDef HAL_SWPMI_DisableLoopback(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_IRQHandler(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_TxCpltCallback(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_TxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_RxCpltCallback(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_RxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi);
void HAL_SWPMI_ErrorCallback(SWPMI_HandleTypeDef *hswpmi);
/* Peripheral Control and State functions ************************************/
HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi);
uint32_t HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi);
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup SWPMI_Private_Types SWPMI Private Types
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup SWPMI_Private_Variables SWPMI Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SWPMI_Private_Constants SWPMI Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup SWPMI_Private_Macros SWPMI Private Macros
* @{
*/
#define IS_SWPMI_VOLTAGE_CLASS(__CLASS__) (((__CLASS__) == SWPMI_VOLTAGE_CLASS_C) || \
((__CLASS__) == SWPMI_VOLTAGE_CLASS_B))
#define IS_SWPMI_BITRATE_VALUE(__VALUE__) (((__VALUE__) <= 255U))
#define IS_SWPMI_TX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_TX_NO_SOFTWAREBUFFER) || \
((__MODE__) == SWPMI_TX_MULTI_SOFTWAREBUFFER))
#define IS_SWPMI_RX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_RX_NO_SOFTWAREBUFFER) || \
((__MODE__) == SWPMI_RX_MULTI_SOFTWAREBUFFER))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_SWPMI_H */