| /** |
| ****************************************************************************** |
| * @file stm32h7xx_hal_pssi.h |
| * @author MCD Application Team |
| * @brief Header file of PSSI HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_HAL_PSSI_H |
| #define STM32H7xx_HAL_PSSI_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx_hal_def.h" |
| |
| /** @addtogroup STM32H7xx_HAL_Driver |
| * @{ |
| */ |
| #if defined(PSSI) |
| /** @addtogroup PSSI PSSI |
| * @brief PSSI HAL module driver |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup PSSI_Exported_Types PSSI Exported Types |
| * @{ |
| */ |
| |
| |
| /** |
| * @brief PSSI Init structure definition |
| */ |
| typedef struct |
| { |
| uint32_t DataWidth; /* !< Configures the parallel bus width 8 lines or 16 lines */ |
| uint32_t BusWidth; /* !< Configures the parallel bus width 8 lines or 16 lines */ |
| uint32_t ControlSignal; /* !< Configures Data enable and Data ready */ |
| uint32_t ClockPolarity; /* !< Configures the PSSI Input Clock polarity */ |
| uint32_t DataEnablePolarity; /* !< Configures the PSSI Data Enable polarity */ |
| uint32_t ReadyPolarity; /* !< Configures the PSSI Ready polarity */ |
| |
| } PSSI_InitTypeDef; |
| |
| |
| /** |
| * @brief HAL PSSI State structures definition |
| */ |
| typedef enum |
| { |
| HAL_PSSI_STATE_RESET = 0x00U, /* !< PSSI not yet initialized or disabled */ |
| HAL_PSSI_STATE_READY = 0x01U, /* !< Peripheral initialized and ready for use */ |
| HAL_PSSI_STATE_BUSY = 0x02U, /* !< An internal process is ongoing */ |
| HAL_PSSI_STATE_BUSY_TX = 0x03U, /* !< Transmit process is ongoing */ |
| HAL_PSSI_STATE_BUSY_RX = 0x04U, /* !< Receive process is ongoing */ |
| HAL_PSSI_STATE_TIMEOUT = 0x05U, /* !< Timeout state */ |
| HAL_PSSI_STATE_ERROR = 0x06U, /* !< PSSI state error */ |
| HAL_PSSI_STATE_ABORT = 0x07U, /* !< PSSI process is aborted */ |
| |
| } HAL_PSSI_StateTypeDef; |
| |
| /** |
| * @brief PSSI handle Structure definition |
| */ |
| typedef struct __PSSI_HandleTypeDef |
| { |
| PSSI_TypeDef *Instance; /*!< PSSI register base address. */ |
| PSSI_InitTypeDef Init; /*!< PSSI Initialization Structure. */ |
| uint32_t *pBuffPtr; /*!< PSSI Data buffer. */ |
| uint32_t XferCount; /*!< PSSI transfer count */ |
| uint32_t XferSize; /*!< PSSI transfer size */ |
| DMA_HandleTypeDef *hdmatx; /*!< PSSI Tx DMA Handle parameters */ |
| DMA_HandleTypeDef *hdmarx; /*!< PSSI Rx DMA Handle parameters */ |
| |
| void (* TxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ |
| void (* RxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ |
| void (* ErrorCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer complete callback. */ |
| void (* AbortCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer error callback. */ |
| |
| void (* MspInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp Init callback. */ |
| void (* MspDeInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp DeInit callback. */ |
| |
| HAL_LockTypeDef Lock; /*!< PSSI lock. */ |
| __IO HAL_PSSI_StateTypeDef State; /*!< PSSI transfer state. */ |
| __IO uint32_t ErrorCode; /*!< PSSI error code. */ |
| |
| } PSSI_HandleTypeDef; |
| |
| |
| /** |
| * @brief HAL PSSI Callback pointer definition |
| */ |
| typedef void (*pPSSI_CallbackTypeDef)(PSSI_HandleTypeDef *hpssi); /*!< Pointer to a PSSI common callback function */ |
| |
| /** |
| * @} |
| */ |
| /** |
| * @brief HAL PSSI Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_PSSI_TX_COMPLETE_CB_ID = 0x00U, /*!< PSSI Tx Transfer completed callback ID */ |
| HAL_PSSI_RX_COMPLETE_CB_ID = 0x01U, /*!< PSSI Rx Transfer completed callback ID */ |
| HAL_PSSI_ERROR_CB_ID = 0x03U, /*!< PSSI Error callback ID */ |
| HAL_PSSI_ABORT_CB_ID = 0x04U, /*!< PSSI Abort callback ID */ |
| |
| HAL_PSSI_MSPINIT_CB_ID = 0x05U, /*!< PSSI Msp Init callback ID */ |
| HAL_PSSI_MSPDEINIT_CB_ID = 0x06U /*!< PSSI Msp DeInit callback ID */ |
| |
| } HAL_PSSI_CallbackIDTypeDef; |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup PSSI_Exported_Constants PSSI Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup PSSI_Error_Code PSSI Error Code |
| * @{ |
| */ |
| #define HAL_PSSI_ERROR_NONE 0x00000000U /*!< No error */ |
| #define HAL_PSSI_ERROR_NOT_SUPPORTED 0x00000001U /*!< Not supported operation */ |
| #define HAL_PSSI_ERROR_UNDER_RUN 0x00000002U /*!< FIFO Under-run error */ |
| #define HAL_PSSI_ERROR_OVER_RUN 0x00000004U /*!< FIFO Over-run error */ |
| #define HAL_PSSI_ERROR_DMA 0x00000008U /*!< Dma error */ |
| #define HAL_PSSI_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ |
| #define HAL_PSSI_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid callback error */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PSSI_DATA_WIDTH PSSI Data Width |
| * @{ |
| */ |
| |
| #define HAL_PSSI_8BITS 0x00000000U /*!< 8 Bits */ |
| #define HAL_PSSI_16BITS 0x00000001U /*!< 16 Bits */ |
| #define HAL_PSSI_32BITS 0x00000002U /*!< 32 Bits */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PSSI_BUS_WIDTH PSSI Bus Width |
| * @{ |
| */ |
| |
| #define HAL_PSSI_8LINES 0x00000000U /*!< 8 data lines */ |
| #define HAL_PSSI_16LINES PSSI_CR_EDM /*!< 16 data lines */ |
| /** |
| * @} |
| */ |
| /** @defgroup PSSI_MODE PSSI mode |
| * @{ |
| */ |
| #define HAL_PSSI_UNIDIRECTIONAL 0x00000000U /*!< Uni-directional mode */ |
| #define HAL_PSSI_BIDIRECTIONAL 0x00000001U /*!< Bi-directional mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PSSI_ControlSignal Configuration |
| * @{ |
| */ |
| #define HAL_PSSI_DE_RDY_DISABLE (0x0U << PSSI_CR_DERDYCFG_Pos) /*!< Neither DE nor RDY are enabled */ |
| #define HAL_PSSI_RDY_ENABLE (0x1U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled */ |
| #define HAL_PSSI_DE_ENABLE (0x2U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled */ |
| #define HAL_PSSI_DE_RDY_ALT_ENABLE (0x3U << PSSI_CR_DERDYCFG_Pos) /*!< Both RDY and DE alternate functions enabled */ |
| #define HAL_PSSI_MAP_RDY_BIDIR_ENABLE (0x4U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on RDY pin */ |
| #define HAL_PSSI_RDY_MAP_ENABLE (0x5U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled, mapped to DE pin */ |
| #define HAL_PSSI_DE_MAP_ENABLE (0x6U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled, mapped to RDY pin */ |
| #define HAL_PSSI_MAP_DE_BIDIR_ENABLE (0x7U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on DE pin */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup PSSI_Data_Enable_Polarity Data Enable Polarity |
| * @{ |
| */ |
| #define HAL_PSSI_DEPOL_ACTIVE_LOW 0x0U /*!< Active Low */ |
| #define HAL_PSSI_DEPOL_ACTIVE_HIGH PSSI_CR_DEPOL /*!< Active High */ |
| /** |
| * @} |
| */ |
| /** @defgroup PSSI_Reday_Polarity Reday Polarity |
| * @{ |
| */ |
| #define HAL_PSSI_RDYPOL_ACTIVE_LOW 0x0U /*!< Active Low */ |
| #define HAL_PSSI_RDYPOL_ACTIVE_HIGH PSSI_CR_RDYPOL /*!< Active High */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PSSI_Clock_Polarity Clock Polarity |
| * @{ |
| */ |
| #define HAL_PSSI_FALLING_EDGE 0x0U /*!< Fallling Edge */ |
| #define HAL_PSSI_RISING_EDGE 0x1U /*!< Rising Edge */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup PSSI_DEFINITION PSSI definitions |
| * @{ |
| */ |
| |
| #define PSSI_MAX_NBYTE_SIZE 0x10000U /* 64 KB */ |
| #define PSSI_TIMEOUT_TRANSMIT 0x0000FFFFU /*!< Timeout Value */ |
| |
| #define PSSI_CR_OUTEN_INPUT 0x00000000U /*!< Input Mode */ |
| #define PSSI_CR_OUTEN_OUTPUT PSSI_CR_OUTEN /*!< Output Mode */ |
| |
| #define PSSI_CR_DMA_ENABLE PSSI_CR_DMAEN /*!< DMA Mode Enable */ |
| #define PSSI_CR_DMA_DISABLE (~PSSI_CR_DMAEN) /*!< DMA Mode Disble */ |
| |
| #define PSSI_CR_16BITS PSSI_CR_EDM /*!< 16 Lines Mode */ |
| #define PSSI_CR_8BITS (~PSSI_CR_EDM) /*!< 8 Lines Mode */ |
| |
| #define PSSI_FLAG_RTT1B PSSI_SR_RTT1B /*!< 1 Byte Fifo Flag*/ |
| #define PSSI_FLAG_RTT4B PSSI_SR_RTT4B /*!< 4 Bytes Fifo Flag*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PSSI_Interrupts PSSI Interrupts |
| * @{ |
| */ |
| |
| #define PSSI_FLAG_OVR_RIS PSSI_RIS_OVR_RIS /*!< Overrun, Underrun errors flag */ |
| #define PSSI_FLAG_MASK PSSI_RIS_OVR_RIS_Msk /*!< Overrun, Underrun errors Mask */ |
| #define PSSI_FLAG_OVR_MIS PSSI_MIS_OVR_MIS /*!< Overrun, Underrun masked errors flag */ |
| /** |
| * @} |
| */ |
| /** |
| * @} |
| */ |
| /* Exported macros ------------------------------------------------------------*/ |
| /** @defgroup PSSI_Exported_Macros PSSI Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset PSSI handle state |
| * @param __HANDLE__ specifies the PSSI handle. |
| * @retval None |
| */ |
| |
| #define HAL_PSSI_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->State = HAL_PSSI_STATE_RESET;\ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| }while(0) |
| |
| |
| /** |
| * @brief Enable the PSSI. |
| * @param __HANDLE__ PSSI handle |
| * @retval None. |
| */ |
| #define HAL_PSSI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= PSSI_CR_ENABLE) |
| /** |
| * @brief Disable the PSSI. |
| * @param __HANDLE__ PSSI handle |
| * @retval None. |
| */ |
| #define HAL_PSSI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (~PSSI_CR_ENABLE)) |
| |
| /* PSSI pripheral STATUS */ |
| /** |
| * @brief Get the PSSI pending flags. |
| * @param __HANDLE__ PSSI handle |
| * @param __FLAG__ flag to check. |
| * This parameter can be any combination of the following values: |
| * @arg PSSI_FLAG_RTT1B: FIFO is ready to transfer one byte |
| * @arg PSSI_FLAG_RTT4B: FIFO is ready to transfer four bytes |
| * @retval The state of FLAG. |
| */ |
| |
| #define HAL_PSSI_GET_STATUS(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR & (__FLAG__)) |
| |
| |
| |
| /* Interrupt & Flag management */ |
| /** |
| * @brief Get the PSSI pending flags. |
| * @param __HANDLE__ PSSI handle |
| * @param __FLAG__ flag to check. |
| * This parameter can be any combination of the following values: |
| * @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag |
| * @retval The state of FLAG. |
| */ |
| #define HAL_PSSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->RIS & (__FLAG__)) |
| |
| /** |
| * @brief Clear the PSSI pending flags. |
| * @param __HANDLE__ PSSI handle |
| * @param __FLAG__ specifies the flag to clear. |
| * This parameter can be any combination of the following values: |
| * @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag |
| * @retval None |
| */ |
| #define HAL_PSSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) |
| |
| /** |
| * @brief Enable the specified PSSI interrupts. |
| * @param __HANDLE__ PSSI handle |
| * @param __INTERRUPT__ specifies the PSSI interrupt sources to be enabled. |
| * This parameter can be any combination of the following values: |
| * @arg PSSI_FLAG_OVR_RIS: Configuration error mask |
| * @retval None |
| */ |
| #define HAL_PSSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the specified PSSI interrupts. |
| * @param __HANDLE__ PSSI handle |
| * @param __INTERRUPT__ specifies the PSSI interrupt sources to be disabled. |
| * This parameter can be any combination of the following values: |
| * @arg PSSI_IT_OVR_IE: Configuration error mask |
| * @retval None |
| */ |
| #define HAL_PSSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified PSSI interrupt source is enabled or not. |
| * @param __HANDLE__ PSSI handle |
| * @param __INTERRUPT__ specifies the PSSI interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg PSSI_IT_OVR_IE: Data Buffer overrun/underrun error interrupt mask |
| * @retval The state of INTERRUPT source. |
| */ |
| #define HAL_PSSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the PSSI Control signal is valid. |
| * @param __CONTROL__ Control signals configuration |
| * @retval Valid or not. |
| */ |
| |
| #define IS_PSSI_CONTROL_SIGNAL(__CONTROL__) (((__CONTROL__) == HAL_PSSI_DE_RDY_DISABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_RDY_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_DE_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_DE_RDY_ALT_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_MAP_RDY_BIDIR_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_RDY_MAP_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_DE_MAP_ENABLE ) || \ |
| ((__CONTROL__) == HAL_PSSI_MAP_DE_BIDIR_ENABLE )) |
| /** |
| * @brief Check whether the PSSI Bus Width is valid. |
| * @param __BUSWIDTH__ PSSI Bush width |
| * @retval Valid or not. |
| */ |
| |
| #define IS_PSSI_BUSWIDTH(__BUSWIDTH__) (((__BUSWIDTH__) == HAL_PSSI_8LINES ) || \ |
| ((__BUSWIDTH__) == HAL_PSSI_16LINES )) |
| |
| /** |
| * @brief Check whether the PSSI Clock Polarity is valid. |
| * @param __CLOCKPOL__ PSSI Clock Polarity |
| * @retval Valid or not. |
| */ |
| |
| #define IS_PSSI_CLOCK_POLARITY(__CLOCKPOL__) (((__CLOCKPOL__) == HAL_PSSI_FALLING_EDGE ) || \ |
| ((__CLOCKPOL__) == HAL_PSSI_RISING_EDGE )) |
| /** |
| * @brief Check whether the PSSI Data Enable Polarity is valid. |
| * @param __DEPOL__ PSSI DE Polarity |
| * @retval Valid or not. |
| */ |
| |
| #define IS_PSSI_DE_POLARITY(__DEPOL__) (((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_LOW ) || \ |
| ((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_HIGH )) |
| /** |
| * @brief Check whether the PSSI Ready Polarity is valid. |
| * @param __RDYPOL__ PSSI RDY Polarity |
| * @retval Valid or not. |
| */ |
| |
| #define IS_PSSI_RDY_POLARITY(__RDYPOL__) (((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_LOW ) || \ |
| ((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_HIGH )) |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup PSSI_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup PSSI_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization and de-initialization functions *******************************/ |
| HAL_StatusTypeDef HAL_PSSI_Init(PSSI_HandleTypeDef *hpssi); |
| HAL_StatusTypeDef HAL_PSSI_DeInit(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_MspInit(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_MspDeInit(PSSI_HandleTypeDef *hpssi); |
| /* Callbacks Register/UnRegister functions ***********************************/ |
| |
| HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, pPSSI_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_PSSI_UnRegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup PSSI_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* IO operation functions *******************************************************/ |
| HAL_StatusTypeDef HAL_PSSI_Transmit(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_PSSI_Receive(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_PSSI_Transmit_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size); |
| HAL_StatusTypeDef HAL_PSSI_Receive_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size); |
| HAL_StatusTypeDef HAL_PSSI_Abort_DMA(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup PSSI_Exported_Functions_Group3 |
| * @{ |
| */ |
| void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi); |
| void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup PSSI_Exported_Functions_Group4 |
| * @{ |
| */ |
| /* Peripheral State functions ***************************************************/ |
| HAL_PSSI_StateTypeDef HAL_PSSI_GetState(PSSI_HandleTypeDef *hpssi); |
| uint32_t HAL_PSSI_GetError(PSSI_HandleTypeDef *hpssi); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| |
| /** |
| * @} |
| */ |
| #endif /* PSSI */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_HAL_PSSI_H */ |
| |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
