| /** |
| ****************************************************************************** |
| * @file stm32h7xx_hal_swpmi.h |
| * @author MCD Application Team |
| * @brief Header file of SWPMI HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_HAL_SWPMI_H |
| #define STM32H7xx_HAL_SWPMI_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx_hal_def.h" |
| |
| /** @addtogroup STM32H7xx_HAL_Driver |
| * @{ |
| */ |
| |
| |
| /** @addtogroup SWPMI |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Types SWPMI Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief SWPMI Init Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t VoltageClass; /*!< Specifies the SWP Voltage Class. |
| This parameter can be a value of @ref SWPMI_Voltage_Class */ |
| |
| uint32_t BitRate; /*!< Specifies the SWPMI Bitrate. |
| This parameter must be a number between 0 and 255U. |
| The Bitrate is computed using the following formula: |
| SWPMI_freq = SWPMI_clk / (((BitRate) + 1) * 4) |
| */ |
| |
| uint32_t TxBufferingMode; /*!< Specifies the transmission buffering mode. |
| This parameter can be a value of @ref SWPMI_Tx_Buffering_Mode */ |
| |
| uint32_t RxBufferingMode; /*!< Specifies the reception buffering mode. |
| This parameter can be a value of @ref SWPMI_Rx_Buffering_Mode */ |
| |
| }SWPMI_InitTypeDef; |
| |
| |
| /** |
| * @brief HAL SWPMI State structures definition |
| */ |
| typedef enum |
| { |
| HAL_SWPMI_STATE_RESET = 0x00, /*!< Peripheral Reset state */ |
| HAL_SWPMI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| HAL_SWPMI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| HAL_SWPMI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| HAL_SWPMI_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| HAL_SWPMI_STATE_ERROR = 0x04 /*!< Error */ |
| }HAL_SWPMI_StateTypeDef; |
| |
| /** |
| * @brief SWPMI handle Structure definition |
| */ |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| typedef struct __SWPMI_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_SWPMI_REGISTER_CALLBACKS */ |
| { |
| SWPMI_TypeDef *Instance; /*!< SWPMI registers base address */ |
| |
| SWPMI_InitTypeDef Init; /*!< SWPMI communication parameters */ |
| |
| uint32_t *pTxBuffPtr; /*!< Pointer to SWPMI Tx transfer Buffer */ |
| |
| uint32_t TxXferSize; /*!< SWPMI Tx Transfer size */ |
| |
| uint32_t TxXferCount; /*!< SWPMI Tx Transfer Counter */ |
| |
| uint32_t *pRxBuffPtr; /*!< Pointer to SWPMI Rx transfer Buffer */ |
| |
| uint32_t RxXferSize; /*!< SWPMI Rx Transfer size */ |
| |
| uint32_t RxXferCount; /*!< SWPMI Rx Transfer Counter */ |
| |
| DMA_HandleTypeDef *hdmatx; /*!< SWPMI Tx DMA Handle parameters */ |
| |
| DMA_HandleTypeDef *hdmarx; /*!< SWPMI Rx DMA Handle parameters */ |
| |
| HAL_LockTypeDef Lock; /*!< SWPMI object */ |
| |
| __IO HAL_SWPMI_StateTypeDef State; /*!< SWPMI communication state */ |
| |
| __IO uint32_t ErrorCode; /*!< SWPMI Error code */ |
| |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| void (*RxCpltCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI receive complete callback */ |
| void (*RxHalfCpltCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI receive half complete callback */ |
| void (*TxCpltCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI transmit complete callback */ |
| void (*TxHalfCpltCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI transmit half complete callback */ |
| void (*ErrorCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI error callback */ |
| void (*MspInitCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI MSP init callback */ |
| void (*MspDeInitCallback) (struct __SWPMI_HandleTypeDef *hswpmi); /*!< SWPMI MSP de-init callback */ |
| #endif |
| |
| }SWPMI_HandleTypeDef; |
| |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief SWPMI callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_SWPMI_RX_COMPLETE_CB_ID = 0x00U, /*!< SWPMI receive complete callback ID */ |
| HAL_SWPMI_RX_HALFCOMPLETE_CB_ID = 0x01U, /*!< SWPMI receive half complete callback ID */ |
| HAL_SWPMI_TX_COMPLETE_CB_ID = 0x02U, /*!< SWPMI transmit complete callback ID */ |
| HAL_SWPMI_TX_HALFCOMPLETE_CB_ID = 0x03U, /*!< SWPMI transmit half complete callback ID */ |
| HAL_SWPMI_ERROR_CB_ID = 0x04U, /*!< SWPMI error callback ID */ |
| HAL_SWPMI_MSPINIT_CB_ID = 0x05U, /*!< SWPMI MSP init callback ID */ |
| HAL_SWPMI_MSPDEINIT_CB_ID = 0x06U /*!< SWPMI MSP de-init callback ID */ |
| }HAL_SWPMI_CallbackIDTypeDef; |
| |
| /** |
| * @brief SWPMI callback pointer definition |
| */ |
| typedef void (*pSWPMI_CallbackTypeDef)(SWPMI_HandleTypeDef *hswpmi); |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Constants SWPMI Exported Constants |
| * @{ |
| */ |
| |
| /** |
| * @defgroup SWPMI_Error_Code SWPMI Error Code Bitmap |
| * @{ |
| */ |
| #define HAL_SWPMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ |
| #define HAL_SWPMI_ERROR_CRC ((uint32_t)0x00000004) /*!< frame error */ |
| #define HAL_SWPMI_ERROR_OVR ((uint32_t)0x00000008) /*!< Overrun error */ |
| #define HAL_SWPMI_ERROR_UDR ((uint32_t)0x0000000C) /*!< Underrun error */ |
| #define HAL_SWPMI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ |
| #define HAL_SWPMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Transfer timeout */ |
| #define HAL_SWPMI_ERROR_TXBEF_TIMEOUT ((uint32_t)0x00000040) /*!< End Tx buffer timeout */ |
| #define HAL_SWPMI_ERROR_TRANSCEIVER_NOT_READY ((uint32_t)0x00000080) /*!< Transceiver not ready */ |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| #define HAL_SWPMI_ERROR_INVALID_CALLBACK ((uint32_t)0x00000100) /*!< Invalid callback error */ |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Voltage_Class SWPMI Voltage Class |
| * @{ |
| */ |
| #define SWPMI_VOLTAGE_CLASS_C ((uint32_t)0x00000000) |
| #define SWPMI_VOLTAGE_CLASS_B SWPMI_OR_CLASS |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Tx_Buffering_Mode SWPMI Tx Buffering Mode |
| * @{ |
| */ |
| #define SWPMI_TX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_TX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_TX_MULTI_SOFTWAREBUFFER SWPMI_CR_TXMODE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Rx_Buffering_Mode SWPMI Rx Buffering Mode |
| * @{ |
| */ |
| #define SWPMI_RX_NO_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_RX_SINGLE_SOFTWAREBUFFER ((uint32_t)0x00000000) |
| #define SWPMI_RX_MULTI_SOFTWAREBUFFER SWPMI_CR_RXMODE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Flags SWPMI Status Flags |
| * Elements values convention: 0xXXXXXXXX |
| * - 0xXXXXXXXX : Flag mask in the ISR register |
| * @{ |
| */ |
| #define SWPMI_FLAG_RXBFF SWPMI_ISR_RXBFF |
| #define SWPMI_FLAG_TXBEF SWPMI_ISR_TXBEF |
| #define SWPMI_FLAG_RXBERF SWPMI_ISR_RXBERF |
| #define SWPMI_FLAG_RXOVRF SWPMI_ISR_RXOVRF |
| #define SWPMI_FLAG_TXUNRF SWPMI_ISR_TXUNRF |
| #define SWPMI_FLAG_RXNE SWPMI_ISR_RXNE |
| #define SWPMI_FLAG_TXE SWPMI_ISR_TXE |
| #define SWPMI_FLAG_TCF SWPMI_ISR_TCF |
| #define SWPMI_FLAG_SRF SWPMI_ISR_SRF |
| #define SWPMI_FLAG_SUSP SWPMI_ISR_SUSP |
| #define SWPMI_FLAG_DEACTF SWPMI_ISR_DEACTF |
| #define SWPMI_FLAG_RDYF SWPMI_ISR_RDYF |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SWPMI_Interrupt_definition SWPMI Interrupts Definition |
| * Elements values convention: 0xXXXX |
| * - 0xXXXX : Flag mask in the IER register |
| * @{ |
| */ |
| #define SWPMI_IT_RDYIE SWPMI_IER_RDYIE |
| #define SWPMI_IT_SRIE SWPMI_IER_SRIE |
| #define SWPMI_IT_TCIE SWPMI_IER_TCIE |
| #define SWPMI_IT_TIE SWPMI_IER_TIE |
| #define SWPMI_IT_RIE SWPMI_IER_RIE |
| #define SWPMI_IT_TXUNRIE SWPMI_IER_TXUNRIE |
| #define SWPMI_IT_RXOVRIE SWPMI_IER_RXOVRIE |
| #define SWPMI_IT_RXBERIE SWPMI_IER_RXBERIE |
| #define SWPMI_IT_TXBEIE SWPMI_IER_TXBEIE |
| #define SWPMI_IT_RXBFIE SWPMI_IER_RXBFIE |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Macros SWPMI Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset SWPMI handle state. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @retval None |
| */ |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| #define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->State = HAL_SWPMI_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_SWPMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SWPMI_STATE_RESET) |
| #endif |
| |
| /** |
| * @brief Enable the SWPMI peripheral. |
| * @param __HANDLE__ SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) |
| |
| /** |
| * @brief Disable the SWPMI peripheral. |
| * @param __HANDLE__ SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPACT) |
| |
| /** |
| * @brief Enable the SWPMI transceiver. |
| * @param __HANDLE__ SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_TRANSCEIVER_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPEN) |
| |
| /** |
| * @brief Disable the SWPMI transceiver. |
| * @param __HANDLE__ SWPMI handle |
| * @retval None |
| */ |
| #define __HAL_SWPMI_TRANSCEIVER_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, SWPMI_CR_SWPEN) |
| |
| /** @brief Check whether the specified SWPMI flag is set or not. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __FLAG__: specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_FLAG_RXBFF Receive buffer full flag. |
| * @arg SWPMI_FLAG_TXBEF Transmit buffer empty flag. |
| * @arg SWPMI_FLAG_RXBERF Receive CRC error flag. |
| * @arg SWPMI_FLAG_RXOVRF Receive overrun error flag. |
| * @arg SWPMI_FLAG_TXUNRF Transmit underrun error flag. |
| * @arg SWPMI_FLAG_RXNE Receive data register not empty. |
| * @arg SWPMI_FLAG_TXE Transmit data register empty. |
| * @arg SWPMI_FLAG_TCF Transfer complete flag. |
| * @arg SWPMI_FLAG_SRF Slave resume flag. |
| * @arg SWPMI_FLAG_SUSP SUSPEND flag. |
| * @arg SWPMI_FLAG_DEACTF DEACTIVATED flag. |
| * @arg SWPMI_FLAG_RDYF Transceiver ready flag. |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->ISR, (__FLAG__)) == (__FLAG__)) |
| |
| /** @brief Clear the specified SWPMI ISR flag. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __FLAG__: specifies the flag to clear. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_FLAG_RXBFF Receive buffer full flag. |
| * @arg SWPMI_FLAG_TXBEF Transmit buffer empty flag. |
| * @arg SWPMI_FLAG_RXBERF Receive CRC error flag. |
| * @arg SWPMI_FLAG_RXOVRF Receive overrun error flag. |
| * @arg SWPMI_FLAG_TXUNRF Transmit underrun error flag. |
| * @arg SWPMI_FLAG_TCF Transfer complete flag. |
| * @arg SWPMI_FLAG_SRF Slave resume flag. |
| * @arg SWPMI_FLAG_RDYF Transceiver ready flag. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->ICR, (__FLAG__)) |
| |
| /** @brief Enable the specified SWPMI interrupt. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __INTERRUPT__ specifies the SWPMI interrupt source to enable. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_RDYIE Transceiver ready interrupt. |
| * @arg SWPMI_IT_SRIE Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE Transmit interrupt. |
| * @arg SWPMI_IT_RIE Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBEIE Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE Receive buffer full interrupt. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) |
| |
| /** @brief Disable the specified SWPMI interrupt. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __INTERRUPT__ specifies the SWPMI interrupt source to disable. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_RDYIE Transceiver ready interrupt. |
| * @arg SWPMI_IT_SRIE Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE Transmit interrupt. |
| * @arg SWPMI_IT_RIE Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBEIE Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE Receive buffer full interrupt. |
| * @retval None |
| */ |
| #define __HAL_SWPMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->IER, (__INTERRUPT__)) |
| |
| /** @brief Check whether the specified SWPMI interrupt has occurred or not. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __IT__ specifies the SWPMI interrupt to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_RDYIE Transceiver ready interrupt. |
| * @arg SWPMI_IT_SRIE Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE Transmit interrupt. |
| * @arg SWPMI_IT_RIE Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBERIE Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE Receive buffer full interrupt. |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_IT(__HANDLE__, __IT__) (READ_BIT((__HANDLE__)->Instance->ISR,(__IT__)) == (__IT__)) |
| |
| /** @brief Check whether the specified SWPMI interrupt source is enabled or not. |
| * @param __HANDLE__ specifies the SWPMI Handle. |
| * @param __IT__ specifies the SWPMI interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg SWPMI_IT_RDYIE Transceiver ready interrupt. |
| * @arg SWPMI_IT_SRIE Slave resume interrupt. |
| * @arg SWPMI_IT_TCIE Transmit complete interrupt. |
| * @arg SWPMI_IT_TIE Transmit interrupt. |
| * @arg SWPMI_IT_RIE Receive interrupt. |
| * @arg SWPMI_IT_TXUNRIE Transmit underrun error interrupt. |
| * @arg SWPMI_IT_RXOVRIE Receive overrun error interrupt. |
| * @arg SWPMI_IT_RXBERIE Receive CRC error interrupt. |
| * @arg SWPMI_IT_TXBEIE Transmit buffer empty interrupt. |
| * @arg SWPMI_IT_RXBFIE Receive buffer full interrupt. |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_SWPMI_GET_IT_SOURCE(__HANDLE__, __IT__) ((READ_BIT((__HANDLE__)->Instance->IER, (__IT__)) == (__IT__)) ? SET : RESET) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup SWPMI_Exported_Functions SWPMI Exported Functions |
| * @{ |
| */ |
| /* Initialization/de-initialization functions ********************************/ |
| HAL_StatusTypeDef HAL_SWPMI_Init(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_DeInit(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_MspInit(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_MspDeInit(SWPMI_HandleTypeDef *hswpmi); |
| |
| #if (USE_HAL_SWPMI_REGISTER_CALLBACKS == 1) |
| /* SWPMI callbacks register/unregister functions ********************************/ |
| HAL_StatusTypeDef HAL_SWPMI_RegisterCallback(SWPMI_HandleTypeDef *hswpmi, |
| HAL_SWPMI_CallbackIDTypeDef CallbackID, |
| pSWPMI_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_SWPMI_UnRegisterCallback(SWPMI_HandleTypeDef *hswpmi, |
| HAL_SWPMI_CallbackIDTypeDef CallbackID); |
| #endif |
| |
| /* IO operation functions *****************************************************/ |
| HAL_StatusTypeDef HAL_SWPMI_Transmit(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_SWPMI_Receive(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_SWPMI_Transmit_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Receive_IT(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Transmit_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_Receive_DMA(SWPMI_HandleTypeDef *hswpmi, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SWPMI_DMAStop(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_EnableLoopback(SWPMI_HandleTypeDef *hswpmi); |
| HAL_StatusTypeDef HAL_SWPMI_DisableLoopback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_IRQHandler(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_TxCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_TxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_RxCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_RxHalfCpltCallback(SWPMI_HandleTypeDef *hswpmi); |
| void HAL_SWPMI_ErrorCallback(SWPMI_HandleTypeDef *hswpmi); |
| |
| /* Peripheral Control and State functions ************************************/ |
| HAL_SWPMI_StateTypeDef HAL_SWPMI_GetState(SWPMI_HandleTypeDef *hswpmi); |
| uint32_t HAL_SWPMI_GetError(SWPMI_HandleTypeDef *hswpmi); |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Types SWPMI Private Types |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Variables SWPMI Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Constants SWPMI Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup SWPMI_Private_Macros SWPMI Private Macros |
| * @{ |
| */ |
| |
| |
| #define IS_SWPMI_VOLTAGE_CLASS(__CLASS__) (((__CLASS__) == SWPMI_VOLTAGE_CLASS_C) || \ |
| ((__CLASS__) == SWPMI_VOLTAGE_CLASS_B)) |
| |
| #define IS_SWPMI_BITRATE_VALUE(__VALUE__) (((__VALUE__) <= 255U)) |
| |
| |
| #define IS_SWPMI_TX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_TX_NO_SOFTWAREBUFFER) || \ |
| ((__MODE__) == SWPMI_TX_MULTI_SOFTWAREBUFFER)) |
| |
| |
| #define IS_SWPMI_RX_BUFFERING_MODE(__MODE__) (((__MODE__) == SWPMI_RX_NO_SOFTWAREBUFFER) || \ |
| ((__MODE__) == SWPMI_RX_MULTI_SOFTWAREBUFFER)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32H7xx_HAL_SWPMI_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
