| /** |
| ****************************************************************************** |
| * @file stm32h7xx_ll_hsem.h |
| * @author MCD Application Team |
| * @brief Header file of HSEM LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32H7xx_LL_HSEM_H |
| #define STM32H7xx_LL_HSEM_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx.h" |
| |
| /** @addtogroup STM32H7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(HSEM) |
| |
| /** @defgroup HSEM_LL HSEM |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup HSEM_LL_Exported_Constants HSEM Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup HSEM_LL_EC_COREID COREID Defines |
| * @{ |
| */ |
| #define LL_HSEM_COREID_NONE 0U |
| #define LL_HSEM_COREID_CPU1 HSEM_CR_COREID_CPU1 |
| #if defined(DUAL_CORE) |
| #define LL_HSEM_COREID_CPU2 HSEM_CR_COREID_CPU2 |
| #endif /* DUAL_CORE */ |
| #define LL_HSEM_COREID HSEM_CR_COREID_CURRENT |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HSEM_LL_EC_GET_FLAG Get Flags Defines |
| * @brief Flags defines which can be used with LL_HSEM_ReadReg function |
| * @{ |
| */ |
| |
| #define LL_HSEM_SEMAPHORE_0 HSEM_C1IER_ISE0 |
| #define LL_HSEM_SEMAPHORE_1 HSEM_C1IER_ISE1 |
| #define LL_HSEM_SEMAPHORE_2 HSEM_C1IER_ISE2 |
| #define LL_HSEM_SEMAPHORE_3 HSEM_C1IER_ISE3 |
| #define LL_HSEM_SEMAPHORE_4 HSEM_C1IER_ISE4 |
| #define LL_HSEM_SEMAPHORE_5 HSEM_C1IER_ISE5 |
| #define LL_HSEM_SEMAPHORE_6 HSEM_C1IER_ISE6 |
| #define LL_HSEM_SEMAPHORE_7 HSEM_C1IER_ISE7 |
| #define LL_HSEM_SEMAPHORE_8 HSEM_C1IER_ISE8 |
| #define LL_HSEM_SEMAPHORE_9 HSEM_C1IER_ISE9 |
| #define LL_HSEM_SEMAPHORE_10 HSEM_C1IER_ISE10 |
| #define LL_HSEM_SEMAPHORE_11 HSEM_C1IER_ISE11 |
| #define LL_HSEM_SEMAPHORE_12 HSEM_C1IER_ISE12 |
| #define LL_HSEM_SEMAPHORE_13 HSEM_C1IER_ISE13 |
| #define LL_HSEM_SEMAPHORE_14 HSEM_C1IER_ISE14 |
| #define LL_HSEM_SEMAPHORE_15 HSEM_C1IER_ISE15 |
| #if (HSEM_SEMID_MAX == 15) |
| #define LL_HSEM_SEMAPHORE_ALL 0x0000FFFFU |
| #else /* HSEM_SEMID_MAX == 31 */ |
| #define LL_HSEM_SEMAPHORE_16 HSEM_C1IER_ISE16 |
| #define LL_HSEM_SEMAPHORE_17 HSEM_C1IER_ISE17 |
| #define LL_HSEM_SEMAPHORE_18 HSEM_C1IER_ISE18 |
| #define LL_HSEM_SEMAPHORE_19 HSEM_C1IER_ISE19 |
| #define LL_HSEM_SEMAPHORE_20 HSEM_C1IER_ISE20 |
| #define LL_HSEM_SEMAPHORE_21 HSEM_C1IER_ISE21 |
| #define LL_HSEM_SEMAPHORE_22 HSEM_C1IER_ISE22 |
| #define LL_HSEM_SEMAPHORE_23 HSEM_C1IER_ISE23 |
| #define LL_HSEM_SEMAPHORE_24 HSEM_C1IER_ISE24 |
| #define LL_HSEM_SEMAPHORE_25 HSEM_C1IER_ISE25 |
| #define LL_HSEM_SEMAPHORE_26 HSEM_C1IER_ISE26 |
| #define LL_HSEM_SEMAPHORE_27 HSEM_C1IER_ISE27 |
| #define LL_HSEM_SEMAPHORE_28 HSEM_C1IER_ISE28 |
| #define LL_HSEM_SEMAPHORE_29 HSEM_C1IER_ISE29 |
| #define LL_HSEM_SEMAPHORE_30 HSEM_C1IER_ISE30 |
| #define LL_HSEM_SEMAPHORE_31 HSEM_C1IER_ISE31 |
| #define LL_HSEM_SEMAPHORE_ALL 0xFFFFFFFFU |
| #endif /* HSEM_SEMID_MAX == 15 */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup HSEM_LL_Exported_Macros HSEM Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup HSEM_LL_EM_WRITE_READ Common Write and read registers Macros |
| * @{ |
| */ |
| |
| /** |
| * @brief Write a value in HSEM register |
| * @param __INSTANCE__ HSEM Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_HSEM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) |
| |
| /** |
| * @brief Read a value in HSEM register |
| * @param __INSTANCE__ HSEM Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_HSEM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup HSEM_LL_Exported_Functions HSEM Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup HSEM_LL_EF_Data_Management Data_Management |
| * @{ |
| */ |
| |
| |
| /** |
| * @brief Return 1 if the semaphore is locked, else return 0. |
| * @rmtoll R LOCK LL_HSEM_IsSemaphoreLocked |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsSemaphoreLocked(HSEM_TypeDef *HSEMx, uint32_t Semaphore) |
| { |
| return ((READ_BIT(HSEMx->R[Semaphore], HSEM_R_LOCK) == (HSEM_R_LOCK_Msk)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get core id. |
| * @rmtoll R COREID LL_HSEM_GetCoreId |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_HSEM_COREID_NONE |
| * @arg @ref LL_HSEM_COREID_CPU1 |
| * @arg @ref LL_HSEM_COREID_CPU2 |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_GetCoreId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) |
| { |
| return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_COREID_Msk)); |
| } |
| |
| /** |
| * @brief Get process id. |
| * @rmtoll R PROCID LL_HSEM_GetProcessId |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @retval Process number. Value between Min_Data=0 and Max_Data=255 |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_GetProcessId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) |
| { |
| return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_PROCID_Msk)); |
| } |
| |
| /** |
| * @brief Get the lock by writing in R register. |
| * @note The R register has to be read to determined if the lock is taken. |
| * @rmtoll R LOCK LL_HSEM_SetLock |
| * @rmtoll R COREID LL_HSEM_SetLock |
| * @rmtoll R PROCID LL_HSEM_SetLock |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @param process Process id. Value between Min_Data=0 and Max_Data=255 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_SetLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) |
| { |
| WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); |
| } |
| |
| /** |
| * @brief Get the lock with 2-step lock. |
| * @rmtoll R LOCK LL_HSEM_2StepLock |
| * @rmtoll R COREID LL_HSEM_2StepLock |
| * @rmtoll R PROCID LL_HSEM_2StepLock |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @param process Process id. Value between Min_Data=0 and Max_Data=255 |
| * @retval 1 lock fail, 0 lock successful or already locked by same process and core |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_2StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) |
| { |
| WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); |
| return ((HSEMx->R[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID | process)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get the lock with 1-step lock. |
| * @rmtoll RLR LOCK LL_HSEM_1StepLock |
| * @rmtoll RLR COREID LL_HSEM_1StepLock |
| * @rmtoll RLR PROCID LL_HSEM_1StepLock |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @retval 1 lock fail, 0 lock successful or already locked by same core |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_1StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore) |
| { |
| return ((HSEMx->RLR[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Release the lock of the semaphore. |
| * @note In case of LL_HSEM_1StepLock usage to lock a semaphore, the process is 0. |
| * @rmtoll R LOCK LL_HSEM_ReleaseLock |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @param process Process number. Value between Min_Data=0 and Max_Data=255 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_ReleaseLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) |
| { |
| WRITE_REG(HSEMx->R[Semaphore], (LL_HSEM_COREID | process)); |
| } |
| |
| /** |
| * @brief Get the lock status of the semaphore. |
| * @rmtoll R LOCK LL_HSEM_GetStatus |
| * @param HSEMx HSEM Instance. |
| * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 |
| * @retval 0 semaphore is free, 1 semaphore is locked */ |
| __STATIC_INLINE uint32_t LL_HSEM_GetStatus(HSEM_TypeDef *HSEMx, uint32_t Semaphore) |
| { |
| return ((HSEMx->R[Semaphore] != 0U) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set the key. |
| * @rmtoll KEYR KEY LL_HSEM_SetKey |
| * @param HSEMx HSEM Instance. |
| * @param key Key value. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_SetKey(HSEM_TypeDef *HSEMx, uint32_t key) |
| { |
| WRITE_REG(HSEMx->KEYR, key << HSEM_KEYR_KEY_Pos); |
| } |
| |
| /** |
| * @brief Get the key. |
| * @rmtoll KEYR KEY LL_HSEM_GetKey |
| * @param HSEMx HSEM Instance. |
| * @retval key to unlock all semaphore from the same core |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_GetKey(HSEM_TypeDef *HSEMx) |
| { |
| return (uint32_t)(READ_BIT(HSEMx->KEYR, HSEM_KEYR_KEY) >> HSEM_KEYR_KEY_Pos); |
| } |
| |
| /** |
| * @brief Release all semaphore with the same core id. |
| * @rmtoll CR KEY LL_HSEM_ResetAllLock |
| * @param HSEMx HSEM Instance. |
| * @param key Key value. |
| * @param core This parameter can be one of the following values: |
| * @arg @ref LL_HSEM_COREID_CPU1 |
| * @arg @ref LL_HSEM_COREID_CPU2 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_ResetAllLock(HSEM_TypeDef *HSEMx, uint32_t key, uint32_t core) |
| { |
| WRITE_REG(HSEMx->CR, (key << HSEM_CR_KEY_Pos) | core); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HSEM_LL_EF_IT_Management IT_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable interrupt. |
| * @rmtoll C1IER ISEM LL_HSEM_EnableIT_C1IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_EnableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| SET_BIT(HSEMx->C1IER, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Disable interrupt. |
| * @rmtoll C1IER ISEM LL_HSEM_DisableIT_C1IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_DisableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| CLEAR_BIT(HSEMx->C1IER, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Check if interrupt is enabled. |
| * @rmtoll C1IER ISEM LL_HSEM_IsEnabledIT_C1IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C1IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| |
| #if defined(DUAL_CORE) |
| /** |
| * @brief Enable interrupt. |
| * @rmtoll C2IER ISEM LL_HSEM_EnableIT_C2IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_EnableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| SET_BIT(HSEMx->C2IER, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Disable interrupt. |
| * @rmtoll C2IER ISEM LL_HSEM_DisableIT_C2IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_DisableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| CLEAR_BIT(HSEMx->C2IER, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Check if interrupt is enabled. |
| * @rmtoll C2IER ISEM LL_HSEM_IsEnabledIT_C2IER |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C2IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| #endif /* DUAL_CORE */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup HSEM_LL_EF_FLAG_Management FLAG_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Clear interrupt status. |
| * @rmtoll C1ICR ISEM LL_HSEM_ClearFlag_C1ICR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_ClearFlag_C1ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| WRITE_REG(HSEMx->C1ICR, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Get interrupt status from ISR register. |
| * @rmtoll C1ISR ISEM LL_HSEM_IsActiveFlag_C1ISR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C1ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get interrupt status from MISR register. |
| * @rmtoll C1MISR ISEM LL_HSEM_IsActiveFlag_C1MISR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 |
| * depends on devices. |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C1MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| |
| #if defined(DUAL_CORE) |
| /** |
| * @brief Clear interrupt status. |
| * @rmtoll C2ICR ISEM LL_HSEM_ClearFlag_C2ICR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_HSEM_ClearFlag_C2ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| WRITE_REG(HSEMx->C2ICR, SemaphoreMask); |
| } |
| |
| /** |
| * @brief Get interrupt status from ISR register. |
| * @rmtoll C2ISR ISEM LL_HSEM_IsActiveFlag_C2ISR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C2ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get interrupt status from MISR register. |
| * @rmtoll C2MISR ISEM LL_HSEM_IsActiveFlag_C2MISR |
| * @param HSEMx HSEM Instance. |
| * @param SemaphoreMask This parameter can be a combination of the following values: |
| * @arg @ref LL_HSEM_SEMAPHORE_0 |
| * @arg @ref LL_HSEM_SEMAPHORE_1 |
| * @arg @ref LL_HSEM_SEMAPHORE_2 |
| * @arg @ref LL_HSEM_SEMAPHORE_3 |
| * @arg @ref LL_HSEM_SEMAPHORE_4 |
| * @arg @ref LL_HSEM_SEMAPHORE_5 |
| * @arg @ref LL_HSEM_SEMAPHORE_6 |
| * @arg @ref LL_HSEM_SEMAPHORE_7 |
| * @arg @ref LL_HSEM_SEMAPHORE_8 |
| * @arg @ref LL_HSEM_SEMAPHORE_9 |
| * @arg @ref LL_HSEM_SEMAPHORE_10 |
| * @arg @ref LL_HSEM_SEMAPHORE_11 |
| * @arg @ref LL_HSEM_SEMAPHORE_12 |
| * @arg @ref LL_HSEM_SEMAPHORE_13 |
| * @arg @ref LL_HSEM_SEMAPHORE_14 |
| * @arg @ref LL_HSEM_SEMAPHORE_15 |
| * @arg @ref LL_HSEM_SEMAPHORE_16 |
| * @arg @ref LL_HSEM_SEMAPHORE_17 |
| * @arg @ref LL_HSEM_SEMAPHORE_18 |
| * @arg @ref LL_HSEM_SEMAPHORE_19 |
| * @arg @ref LL_HSEM_SEMAPHORE_20 |
| * @arg @ref LL_HSEM_SEMAPHORE_21 |
| * @arg @ref LL_HSEM_SEMAPHORE_22 |
| * @arg @ref LL_HSEM_SEMAPHORE_23 |
| * @arg @ref LL_HSEM_SEMAPHORE_24 |
| * @arg @ref LL_HSEM_SEMAPHORE_25 |
| * @arg @ref LL_HSEM_SEMAPHORE_26 |
| * @arg @ref LL_HSEM_SEMAPHORE_27 |
| * @arg @ref LL_HSEM_SEMAPHORE_28 |
| * @arg @ref LL_HSEM_SEMAPHORE_29 |
| * @arg @ref LL_HSEM_SEMAPHORE_30 |
| * @arg @ref LL_HSEM_SEMAPHORE_31 |
| * @arg @ref LL_HSEM_SEMAPHORE_ALL |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) |
| { |
| return ((READ_BIT(HSEMx->C2MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); |
| } |
| #endif /* DUAL_CORE */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(HSEM) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32H7xx_LL_HSEM_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
