| /** |
| ****************************************************************************** |
| * @file stm32h7xx_ll_spi.c |
| * @author MCD Application Team |
| * @brief SPI LL module driver. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| #if defined(USE_FULL_LL_DRIVER) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32h7xx_ll_spi.h" |
| #include "stm32h7xx_ll_bus.h" |
| #include "stm32h7xx_ll_rcc.h" |
| #ifdef USE_FULL_ASSERT |
| #include "stm32_assert.h" |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif /* USE_FULL_ASSERT */ |
| |
| /** @addtogroup STM32H7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) |
| |
| /** @addtogroup SPI_LL |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @addtogroup SPI_LL_Private_Macros |
| * @{ |
| */ |
| |
| #define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) || \ |
| ((__VALUE__) == LL_SPI_MODE_SLAVE)) |
| |
| #define IS_LL_SPI_SS_IDLENESS(__VALUE__) (((__VALUE__) == LL_SPI_SS_IDLENESS_00CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_01CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_02CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_03CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_04CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_05CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_06CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_07CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_08CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_09CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_10CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_11CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_12CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_13CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_14CYCLE) || \ |
| ((__VALUE__) == LL_SPI_SS_IDLENESS_15CYCLE)) |
| |
| #define IS_LL_SPI_ID_IDLENESS(__VALUE__) (((__VALUE__) == LL_SPI_ID_IDLENESS_00CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_01CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_02CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_03CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_04CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_05CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_06CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_07CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_08CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_09CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_10CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_11CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_12CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_13CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_14CYCLE) || \ |
| ((__VALUE__) == LL_SPI_ID_IDLENESS_15CYCLE)) |
| |
| #define IS_LL_SPI_TXCRCINIT_PATTERN(__VALUE__) (((__VALUE__) == LL_SPI_TXCRCINIT_ALL_ZERO_PATTERN) || \ |
| ((__VALUE__) == LL_SPI_TXCRCINIT_ALL_ONES_PATTERN)) |
| |
| #define IS_LL_SPI_RXCRCINIT_PATTERN(__VALUE__) (((__VALUE__) == LL_SPI_RXCRCINIT_ALL_ZERO_PATTERN) || \ |
| ((__VALUE__) == LL_SPI_RXCRCINIT_ALL_ONES_PATTERN)) |
| |
| #define IS_LL_SPI_UDR_CONFIG_REGISTER(__VALUE__) (((__VALUE__) == LL_SPI_UDR_CONFIG_REGISTER_PATTERN) || \ |
| ((__VALUE__) == LL_SPI_UDR_CONFIG_LAST_RECEIVED) || \ |
| ((__VALUE__) == LL_SPI_UDR_CONFIG_LAST_TRANSMITTED)) |
| |
| #define IS_LL_SPI_UDR_DETECT_BEGIN_DATA(__VALUE__) (((__VALUE__) == LL_SPI_UDR_DETECT_BEGIN_DATA_FRAME) || \ |
| ((__VALUE__) == LL_SPI_UDR_DETECT_END_DATA_FRAME) || \ |
| ((__VALUE__) == LL_SPI_UDR_DETECT_BEGIN_ACTIVE_NSS)) |
| |
| #define IS_LL_SPI_PROTOCOL(__VALUE__) (((__VALUE__) == LL_SPI_PROTOCOL_MOTOROLA) || \ |
| ((__VALUE__) == LL_SPI_PROTOCOL_TI)) |
| |
| #define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) || \ |
| ((__VALUE__) == LL_SPI_PHASE_2EDGE)) |
| |
| #define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) || \ |
| ((__VALUE__) == LL_SPI_POLARITY_HIGH)) |
| |
| #define IS_LL_SPI_BAUDRATEPRESCALER(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) || \ |
| ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) |
| |
| #define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) || \ |
| ((__VALUE__) == LL_SPI_MSB_FIRST)) |
| |
| #define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) || \ |
| ((__VALUE__) == LL_SPI_SIMPLEX_TX) || \ |
| ((__VALUE__) == LL_SPI_SIMPLEX_RX) || \ |
| ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) || \ |
| ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) |
| |
| #define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_17BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_18BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_19BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_20BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_21BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_22BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_23BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_24BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_25BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_26BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_27BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_28BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_29BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_30BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_31BIT) || \ |
| ((__VALUE__) == LL_SPI_DATAWIDTH_32BIT)) |
| |
| #define IS_LL_SPI_FIFO_TH(__VALUE__) (((__VALUE__) == LL_SPI_FIFO_TH_01DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_02DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_03DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_04DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_05DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_06DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_07DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_08DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_09DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_10DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_11DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_12DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_13DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_14DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_15DATA) || \ |
| ((__VALUE__) == LL_SPI_FIFO_TH_16DATA)) |
| |
| #define IS_LL_SPI_CRC(__VALUE__) (((__VALUE__) == LL_SPI_CRC_4BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_5BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_6BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_7BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_8BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_9BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_10BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_11BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_12BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_13BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_14BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_15BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_16BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_17BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_18BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_19BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_20BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_21BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_22BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_23BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_24BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_25BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_26BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_27BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_28BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_29BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_30BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_31BIT) || \ |
| ((__VALUE__) == LL_SPI_CRC_32BIT)) |
| |
| #define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) || \ |
| ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) || \ |
| ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) |
| |
| #define IS_LL_SPI_RX_FIFO(__VALUE__) (((__VALUE__) == LL_SPI_RX_FIFO_0PACKET) || \ |
| ((__VALUE__) == LL_SPI_RX_FIFO_1PACKET) || \ |
| ((__VALUE__) == LL_SPI_RX_FIFO_2PACKET) || \ |
| ((__VALUE__) == LL_SPI_RX_FIFO_3PACKET)) |
| |
| #define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) || \ |
| ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) |
| |
| #define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1UL) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup SPI_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup SPI_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize the SPI registers to their default reset values. |
| * @param SPIx SPI Instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are de-initialized |
| * - ERROR: SPI registers are not de-initialized |
| */ |
| ErrorStatus LL_SPI_DeInit(const SPI_TypeDef *SPIx) |
| { |
| ErrorStatus status = ERROR; |
| |
| /* Check the parameters */ |
| assert_param(IS_SPI_ALL_INSTANCE(SPIx)); |
| |
| #if defined(SPI1) |
| if (SPIx == SPI1) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI1); |
| |
| /* Release reset of SPI clock */ |
| LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI1); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI1 */ |
| #if defined(SPI2) |
| if (SPIx == SPI2) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI2); |
| |
| /* Release reset of SPI clock */ |
| LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI2); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI2 */ |
| #if defined(SPI3) |
| if (SPIx == SPI3) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3); |
| |
| /* Release reset of SPI clock */ |
| LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI3 */ |
| #if defined(SPI4) |
| if (SPIx == SPI4) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI4); |
| |
| /* Release reset of SPI clock */ |
| LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI4); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI4 */ |
| #if defined(SPI5) |
| if (SPIx == SPI5) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_SPI5); |
| |
| /* Release reset of SPI clock */ |
| LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_SPI5); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI5 */ |
| #if defined(SPI6) |
| if (SPIx == SPI6) |
| { |
| /* Force reset of SPI clock */ |
| LL_APB4_GRP1_ForceReset(LL_APB4_GRP1_PERIPH_SPI6); |
| |
| /* Release reset of SPI clock */ |
| LL_APB4_GRP1_ReleaseReset(LL_APB4_GRP1_PERIPH_SPI6); |
| |
| /* Update the return status */ |
| status = SUCCESS; |
| } |
| #endif /* SPI6 */ |
| |
| return status; |
| } |
| |
| /** |
| * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. |
| * @note As some bits in SPI configuration registers can only be written when the SPI is disabled |
| * (SPI_CR1_SPE bit =0), SPI IP should be in disabled state prior calling this function. |
| * Otherwise, ERROR result will be returned. |
| * @param SPIx SPI Instance |
| * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value. (Return always SUCCESS) |
| */ |
| ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) |
| { |
| ErrorStatus status = ERROR; |
| uint32_t tmp_nss; |
| uint32_t tmp_mode; |
| uint32_t tmp_nss_polarity; |
| |
| /* Check the SPI Instance SPIx*/ |
| assert_param(IS_SPI_ALL_INSTANCE(SPIx)); |
| |
| /* Check the SPI parameters from SPI_InitStruct*/ |
| assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); |
| assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); |
| assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); |
| assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); |
| assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); |
| assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); |
| assert_param(IS_LL_SPI_BAUDRATEPRESCALER(SPI_InitStruct->BaudRate)); |
| assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); |
| assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); |
| |
| /* Check the SPI instance is not enabled */ |
| if (LL_SPI_IsEnabled(SPIx) == 0x00000000UL) |
| { |
| /*---------------------------- SPIx CFG1 Configuration ------------------------ |
| * Configure SPIx CFG1 with parameters: |
| * - Master Baud Rate : SPI_CFG1_MBR[2:0] bits |
| * - CRC Computation Enable : SPI_CFG1_CRCEN bit |
| * - Length of data frame : SPI_CFG1_DSIZE[4:0] bits |
| */ |
| MODIFY_REG(SPIx->CFG1, SPI_CFG1_MBR | SPI_CFG1_CRCEN | SPI_CFG1_DSIZE, |
| SPI_InitStruct->BaudRate | SPI_InitStruct->CRCCalculation | SPI_InitStruct->DataWidth); |
| |
| tmp_nss = SPI_InitStruct->NSS; |
| tmp_mode = SPI_InitStruct->Mode; |
| tmp_nss_polarity = LL_SPI_GetNSSPolarity(SPIx); |
| |
| /* Checks to setup Internal SS signal level and avoid a MODF Error */ |
| if ((tmp_nss == LL_SPI_NSS_SOFT) && (((tmp_nss_polarity == LL_SPI_NSS_POLARITY_LOW) && \ |
| (tmp_mode == LL_SPI_MODE_MASTER)) || \ |
| ((tmp_nss_polarity == LL_SPI_NSS_POLARITY_HIGH) && \ |
| (tmp_mode == LL_SPI_MODE_SLAVE)))) |
| { |
| LL_SPI_SetInternalSSLevel(SPIx, LL_SPI_SS_LEVEL_HIGH); |
| } |
| |
| /*---------------------------- SPIx CFG2 Configuration ------------------------ |
| * Configure SPIx CFG2 with parameters: |
| * - NSS management : SPI_CFG2_SSM, SPI_CFG2_SSOE bits |
| * - ClockPolarity : SPI_CFG2_CPOL bit |
| * - ClockPhase : SPI_CFG2_CPHA bit |
| * - BitOrder : SPI_CFG2_LSBFRST bit |
| * - Master/Slave Mode : SPI_CFG2_MASTER bit |
| * - SPI Mode : SPI_CFG2_COMM[1:0] bits |
| */ |
| MODIFY_REG(SPIx->CFG2, SPI_CFG2_SSM | SPI_CFG2_SSOE | |
| SPI_CFG2_CPOL | SPI_CFG2_CPHA | |
| SPI_CFG2_LSBFRST | SPI_CFG2_MASTER | SPI_CFG2_COMM, |
| SPI_InitStruct->NSS | SPI_InitStruct->ClockPolarity | |
| SPI_InitStruct->ClockPhase | SPI_InitStruct->BitOrder | |
| SPI_InitStruct->Mode | (SPI_InitStruct->TransferDirection & SPI_CFG2_COMM)); |
| |
| /*---------------------------- SPIx CR1 Configuration ------------------------ |
| * Configure SPIx CR1 with parameter: |
| * - Half Duplex Direction : SPI_CR1_HDDIR bit |
| */ |
| MODIFY_REG(SPIx->CR1, SPI_CR1_HDDIR, SPI_InitStruct->TransferDirection & SPI_CR1_HDDIR); |
| |
| /*---------------------------- SPIx CRCPOLY Configuration ---------------------- |
| * Configure SPIx CRCPOLY with parameter: |
| * - CRCPoly : CRCPOLY[31:0] bits |
| */ |
| if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) |
| { |
| assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); |
| LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); |
| } |
| |
| /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ |
| CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); |
| |
| status = SUCCESS; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_SPI_InitTypeDef field to default value. |
| * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) |
| { |
| /* Set SPI_InitStruct fields to default values */ |
| SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; |
| SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; |
| SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; |
| SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; |
| SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; |
| SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; |
| SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; |
| SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; |
| SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; |
| SPI_InitStruct->CRCPoly = 7UL; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /** @addtogroup I2S_LL |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup I2S_LL_Private_Constants I2S Private Constants |
| * @{ |
| */ |
| /* I2S registers Masks */ |
| #define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ |
| SPI_I2SCFGR_DATFMT | SPI_I2SCFGR_CKPOL | \ |
| SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_MCKOE | \ |
| SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) |
| |
| /** |
| * @} |
| */ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup I2S_LL_Private_Macros I2S Private Macros |
| * @{ |
| */ |
| |
| #define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) || \ |
| ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) || \ |
| ((__VALUE__) == LL_I2S_DATAFORMAT_24B) || \ |
| ((__VALUE__) == LL_I2S_DATAFORMAT_24B_LEFT_ALIGNED) || \ |
| ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) |
| |
| #define IS_LL_I2S_CHANNEL_LENGTH_TYPE (__VALUE__) (((__VALUE__) == LL_I2S_SLAVE_VARIABLE_CH_LENGTH) || \ |
| ((__VALUE__) == LL_I2S_SLAVE_FIXED_CH_LENGTH)) |
| |
| #define IS_LL_I2S_CKPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) || \ |
| ((__VALUE__) == LL_I2S_POLARITY_HIGH)) |
| |
| #define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) || \ |
| ((__VALUE__) == LL_I2S_STANDARD_MSB) || \ |
| ((__VALUE__) == LL_I2S_STANDARD_LSB) || \ |
| ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) || \ |
| ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) |
| |
| #define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) || \ |
| ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) || \ |
| ((__VALUE__) == LL_I2S_MODE_SLAVE_FULL_DUPLEX) || \ |
| ((__VALUE__) == LL_I2S_MODE_MASTER_TX) || \ |
| ((__VALUE__) == LL_I2S_MODE_MASTER_RX) || \ |
| ((__VALUE__) == LL_I2S_MODE_MASTER_FULL_DUPLEX)) |
| |
| #define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) || \ |
| ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) |
| |
| #define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) && \ |
| ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) || \ |
| ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) |
| |
| #define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) <= 0xFFUL) |
| |
| #define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) || \ |
| ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) |
| |
| #define IS_LL_I2S_FIFO_TH (__VALUE__) (((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_01DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_02DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_03DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_04DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_05DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_06DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_07DATA) || \ |
| ((__VALUE__) == LL_I2S_LL_I2S_FIFO_TH_08DATA)) |
| |
| #define IS_LL_I2S_BIT_ORDER(__VALUE__) (((__VALUE__) == LL_I2S_LSB_FIRST) || \ |
| ((__VALUE__) == LL_I2S_MSB_FIRST)) |
| /** |
| * @} |
| */ |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup I2S_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup I2S_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize the SPI/I2S registers to their default reset values. |
| * @param SPIx SPI Instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are de-initialized |
| * - ERROR: SPI registers are not de-initialized |
| */ |
| ErrorStatus LL_I2S_DeInit(const SPI_TypeDef *SPIx) |
| { |
| return LL_SPI_DeInit(SPIx); |
| } |
| |
| /** |
| * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. |
| * @note As some bits in I2S configuration registers can only be written when the SPI is disabled |
| * (SPI_CR1_SPE bit =0), SPI IP should be in disabled state prior calling this function. |
| * Otherwise, ERROR result will be returned. |
| * @note I2S (SPI) source clock must be ready before calling this function. Otherwise will results |
| * in wrong programming. |
| * @param SPIx SPI Instance |
| * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: SPI registers are Initialized |
| * - ERROR: SPI registers are not Initialized |
| */ |
| ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, const LL_I2S_InitTypeDef *I2S_InitStruct) |
| { |
| uint32_t i2sdiv = 0UL; |
| uint32_t i2sodd = 0UL; |
| uint32_t packetlength = 1UL; |
| uint32_t ispcm = 0UL; |
| uint32_t tmp; |
| uint32_t sourceclock = 0UL; |
| |
| ErrorStatus status = ERROR; |
| |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(sourceclock); |
| |
| /* Check the I2S parameters */ |
| assert_param(IS_I2S_ALL_INSTANCE(SPIx)); |
| assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); |
| assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); |
| assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); |
| assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); |
| assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); |
| assert_param(IS_LL_I2S_CKPOL(I2S_InitStruct->ClockPolarity)); |
| |
| /* Check that SPE bit is set to 0 in order to be sure that SPI/I2S block is disabled. |
| * In this case, it is useless to check if the I2SMOD bit is set to 0 because |
| * this bit I2SMOD only serves to select the desired mode. |
| */ |
| if (LL_SPI_IsEnabled(SPIx) == 0x00000000UL) |
| { |
| /*---------------------------- SPIx I2SCFGR Configuration -------------------- |
| * Configure SPIx I2SCFGR with parameters: |
| * - Mode : SPI_I2SCFGR_I2SCFG[2:0] bits |
| * - Standard : SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits |
| * - DataFormat : SPI_I2SCFGR_CHLEN, SPI_I2SCFGR_DATFMT and SPI_I2SCFGR_DATLEN[1:0] bits |
| * - ClockPolarity : SPI_I2SCFGR_CKPOL bit |
| * - MCLKOutput : SPI_I2SPR_MCKOE bit |
| * - I2S mode : SPI_I2SCFGR_I2SMOD bit |
| */ |
| |
| /* Write to SPIx I2SCFGR */ |
| MODIFY_REG(SPIx->I2SCFGR, |
| I2S_I2SCFGR_CLEAR_MASK, |
| I2S_InitStruct->Mode | I2S_InitStruct->Standard | |
| I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | |
| I2S_InitStruct->MCLKOutput | SPI_I2SCFGR_I2SMOD); |
| |
| /*---------------------------- SPIx I2SCFGR Configuration ---------------------- |
| * Configure SPIx I2SCFGR with parameters: |
| * - AudioFreq : SPI_I2SCFGR_I2SDIV[7:0] and SPI_I2SCFGR_ODD bits |
| */ |
| |
| /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) |
| * else, default values are used: i2sodd = 0U, i2sdiv = 0U. |
| */ |
| if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) |
| { |
| /* Check the frame length (For the Prescaler computing) |
| * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). |
| */ |
| if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) |
| { |
| /* Packet length is 32 bits */ |
| packetlength = 2UL; |
| } |
| |
| /* Check if PCM standard is used */ |
| if ((I2S_InitStruct->Standard == LL_I2S_STANDARD_PCM_SHORT) || |
| (I2S_InitStruct->Standard == LL_I2S_STANDARD_PCM_LONG)) |
| { |
| ispcm = 1UL; |
| } |
| |
| /* Get the I2S (SPI) source clock value */ |
| #if defined (SPI_SPI6I2S_SUPPORT) |
| if (SPIx == SPI6) |
| { |
| sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI6_CLKSOURCE); |
| } |
| else |
| { |
| sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI123_CLKSOURCE); |
| } |
| #else |
| sourceclock = LL_RCC_GetSPIClockFreq(LL_RCC_SPI123_CLKSOURCE); |
| #endif /* SPI_SPI6I2S_SUPPORT */ |
| |
| /* Compute the Real divider depending on the MCLK output state with a fixed point */ |
| if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) |
| { |
| /* MCLK output is enabled */ |
| tmp = (((sourceclock / (256UL >> ispcm)) * 16UL) / I2S_InitStruct->AudioFreq) + 8UL; |
| } |
| else |
| { |
| /* MCLK output is disabled */ |
| tmp = (((sourceclock / ((32UL >> ispcm) * packetlength)) * 16UL) / I2S_InitStruct->AudioFreq) + 8UL; |
| } |
| |
| /* Remove the fixed point */ |
| tmp = tmp / 16UL; |
| |
| /* Check the parity of the divider */ |
| i2sodd = tmp & 0x1UL; |
| |
| /* Compute the i2sdiv prescaler */ |
| i2sdiv = tmp / 2UL; |
| } |
| |
| /* Test if the obtain values are forbidden or out of range */ |
| if (((i2sodd == 1UL) && (i2sdiv == 1UL)) || (i2sdiv > 0xFFUL)) |
| { |
| /* Set the default values */ |
| i2sdiv = 0UL; |
| i2sodd = 0UL; |
| } |
| |
| /* Write to SPIx I2SCFGR register the computed value */ |
| MODIFY_REG(SPIx->I2SCFGR, |
| SPI_I2SCFGR_ODD | SPI_I2SCFGR_I2SDIV, |
| (i2sodd << SPI_I2SCFGR_ODD_Pos) | (i2sdiv << SPI_I2SCFGR_I2SDIV_Pos)); |
| |
| status = SUCCESS; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_I2S_InitTypeDef field to default value. |
| * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) |
| { |
| /*--------------- Reset I2S init structure parameters values -----------------*/ |
| I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; |
| I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; |
| I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; |
| I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; |
| I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; |
| I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; |
| } |
| |
| /** |
| * @brief Set linear and parity prescaler. |
| * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n |
| * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). |
| * @param SPIx SPI Instance |
| * @param PrescalerLinear Value between Min_Data=0x00 and Max_Data=0xFF |
| * @note PrescalerLinear '1' is not authorized with parity LL_I2S_PRESCALER_PARITY_ODD |
| * @param PrescalerParity This parameter can be one of the following values: |
| * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN |
| * @arg @ref LL_I2S_PRESCALER_PARITY_ODD |
| * @retval None |
| */ |
| void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) |
| { |
| /* Check the I2S parameters */ |
| assert_param(IS_I2S_ALL_INSTANCE(SPIx)); |
| assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); |
| assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); |
| |
| /* Write to SPIx I2SPR */ |
| MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SDIV | SPI_I2SCFGR_ODD, (PrescalerLinear << SPI_I2SCFGR_I2SDIV_Pos) | |
| (PrescalerParity << SPI_I2SCFGR_ODD_Pos)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(SPI1) || defined(SPI2) || defined(SPI3) || defined(SPI4) || defined(SPI5) || defined(SPI6) */ |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
