blob: 8eb9941e62cb7f0d492e8a159af7fc1dcc03b30c [file] [log] [blame]
/**
******************************************************************************
* @file stm32h7xx_hal_fmac.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the FMAC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_FMAC_H
#define STM32H7xx_HAL_FMAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
#if defined(FMAC)
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup FMAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FMAC_Exported_Types FMAC Exported Types
* @{
*/
/**
* @brief FMAC HAL State Structure definition
*/
typedef enum
{
HAL_FMAC_STATE_RESET = 0x00U, /*!< FMAC not yet initialized or disabled */
HAL_FMAC_STATE_READY = 0x20U, /*!< FMAC initialized and ready for use */
HAL_FMAC_STATE_BUSY = 0x24U, /*!< FMAC internal process is ongoing */
HAL_FMAC_STATE_BUSY_RD = 0x25U, /*!< FMAC reading configuration is ongoing */
HAL_FMAC_STATE_BUSY_WR = 0x26U, /*!< FMAC writing configuration is ongoing */
HAL_FMAC_STATE_TIMEOUT = 0xA0U, /*!< FMAC in Timeout state */
HAL_FMAC_STATE_ERROR = 0xE0U /*!< FMAC in Error state */
} HAL_FMAC_StateTypeDef;
/**
* @brief FMAC Handle Structure definition
*/
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
typedef struct __FMAC_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
{
FMAC_TypeDef *Instance; /*!< Register base address */
uint32_t FilterParam; /*!< Filter configuration (operation and parameters).
Set to 0 if no valid configuration was applied. */
uint8_t InputAccess; /*!< Access to the input buffer (internal memory area): DMA, IT, Polling, None.
This parameter can be a value of @ref FMAC_Buffer_Access. */
uint8_t OutputAccess; /*!< Access to the output buffer (internal memory area): DMA, IT, Polling, None.
This parameter can be a value of @ref FMAC_Buffer_Access. */
int16_t *pInput; /*!< Pointer to FMAC input data buffer */
uint16_t InputCurrentSize; /*!< Number of the input elements already written into FMAC */
uint16_t *pInputSize; /*!< Number of input elements to write (memory allocated to pInput).
In case of early interruption of the filter operation, its value will be updated. */
int16_t *pOutput; /*!< Pointer to FMAC output data buffer */
uint16_t OutputCurrentSize; /*!< Number of the output elements already read from FMAC */
uint16_t *pOutputSize; /*!< Number of output elements to read (memory allocated to pOutput).
In case of early interruption of the filter operation, its value will be updated. */
DMA_HandleTypeDef *hdmaIn; /*!< FMAC peripheral input data DMA handle parameters */
DMA_HandleTypeDef *hdmaOut; /*!< FMAC peripheral output data DMA handle parameters */
DMA_HandleTypeDef *hdmaPreload; /*!< FMAC peripheral preloaded data (X1, X2 and Y) DMA handle parameters */
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
void (* ErrorCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC error callback */
void (* HalfGetDataCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC get half data callback */
void (* GetDataCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC get data callback */
void (* HalfOutputDataReadyCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC half output data ready callback */
void (* OutputDataReadyCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC output data ready callback */
void (* FilterConfigCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC filter configuration callback */
void (* FilterPreloadCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC filter preload callback */
void (* MspInitCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC Msp Init callback */
void (* MspDeInitCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC Msp DeInit callback */
#endif /* (USE_HAL_FMAC_REGISTER_CALLBACKS) */
HAL_LockTypeDef Lock; /*!< FMAC locking object */
__IO HAL_FMAC_StateTypeDef State; /*!< FMAC state related to global handle management
This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
__IO HAL_FMAC_StateTypeDef RdState; /*!< FMAC state related to read operations (access to Y buffer)
This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
__IO HAL_FMAC_StateTypeDef WrState; /*!< FMAC state related to write operations (access to X1 buffer)
This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
__IO uint32_t ErrorCode; /*!< FMAC peripheral error code
This parameter can be a value of @ref FMAC_Error_Code */
} FMAC_HandleTypeDef;
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
/**
* @brief FMAC Callback ID structure definition
*/
typedef enum
{
HAL_FMAC_ERROR_CB_ID = 0x00U, /*!< FMAC error callback ID */
HAL_FMAC_HALF_GET_DATA_CB_ID = 0x01U, /*!< FMAC get half data callback ID */
HAL_FMAC_GET_DATA_CB_ID = 0x02U, /*!< FMAC get data callback ID */
HAL_FMAC_HALF_OUTPUT_DATA_READY_CB_ID = 0x03U, /*!< FMAC half output data ready callback ID */
HAL_FMAC_OUTPUT_DATA_READY_CB_ID = 0x04U, /*!< FMAC output data ready callback ID */
HAL_FMAC_FILTER_CONFIG_CB_ID = 0x05U, /*!< FMAC filter configuration callback ID */
HAL_FMAC_FILTER_PRELOAD_CB_ID = 0x06U, /*!< FMAC filter preload callback ID */
HAL_FMAC_MSPINIT_CB_ID = 0x07U, /*!< FMAC MspInit callback ID */
HAL_FMAC_MSPDEINIT_CB_ID = 0x08U, /*!< FMAC MspDeInit callback ID */
} HAL_FMAC_CallbackIDTypeDef;
/**
* @brief HAL FMAC Callback pointer definition
*/
typedef void (*pFMAC_CallbackTypeDef)(FMAC_HandleTypeDef *hfmac); /*!< pointer to an FMAC callback function */
#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
/**
* @brief FMAC Filter Configuration Structure definition
*/
typedef struct
{
uint8_t InputBaseAddress; /*!< Base address of the input buffer (X1) within the internal memory (0x00 to 0xFF).
Ignored if InputBufferSize is set to 0 (previous configuration kept).
NB: the buffers can overlap or even coincide exactly. */
uint8_t InputBufferSize; /*!< Number of 16-bit addresses allocated to the input buffer (including the optional "headroom").
0 if a previous configuration should be kept. */
uint32_t InputThreshold; /*!< Input threshold: the buffer full flag will be set if the number of free spaces
in the buffer is inferior to this threshold.
This parameter can be a value of @ref FMAC_Data_Buffer_Threshold. */
uint8_t CoeffBaseAddress; /*!< Base address of the coefficient buffer (X2) within the internal memory (0x00 to 0xFF).
Ignored if CoeffBufferSize is set to 0 (previous configuration kept).
NB: the buffers can overlap or even coincide exactly. */
uint8_t CoeffBufferSize; /*!< Number of 16-bit addresses allocated to the coefficient buffer.
0 if a previous configuration should be kept. */
uint8_t OutputBaseAddress; /*!< Base address of the output buffer (Y) within the internal memory (0x00 to 0xFF).
Ignored if OuputBufferSize is set to 0 (previous configuration kept).
NB: the buffers can overlap or even coincide exactly. */
uint8_t OutputBufferSize; /*!< Number of 16-bit addresses allocated to the output buffer (including the optional "headroom").
0 if a previous configuration should be kept. */
uint32_t OutputThreshold; /*!< Output threshold: the buffer empty flag will be set if the number of unread values
in the buffer is inferior to this threshold.
This parameter can be a value of @ref FMAC_Data_Buffer_Threshold. */
int16_t *pCoeffA; /*!< [IIR only] Initialization of the coefficient vector A.
If not needed, it should be set to NULL. */
uint8_t CoeffASize; /*!< Size of the coefficient vector A. */
int16_t *pCoeffB; /*!< Initialization of the coefficient vector B.
If not needed (re-use of a previously loaded buffer), it should be set to NULL. */
uint8_t CoeffBSize; /*!< Size of the coefficient vector B. */
uint8_t InputAccess; /*!< Access to the input buffer (internal memory area): DMT, IT, Polling, None.
This parameter can be a value of @ref FMAC_Buffer_Access. */
uint8_t OutputAccess; /*!< Access to the output buffer (internal memory area): DMA, IT, Polling, None.
This parameter can be a value of @ref FMAC_Buffer_Access. */
uint32_t Clip; /*!< Enable or disable the clipping feature (wrapping when the q1.15 range is exceeded).
This parameter can be a value of @ref FMAC_Clip_State. */
uint32_t Filter; /*!< Filter type.
This parameter can be a value of @ref FMAC_Functions (filter related values). */
uint8_t P; /*!< Parameter P (vector length, number of filter taps, etc.). */
uint8_t Q; /*!< Parameter Q (vector length, etc.). Ignored if not needed. */
uint8_t R; /*!< Parameter R (gain, etc.). Ignored if not needed. */
} FMAC_FilterConfigTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FMAC_Exported_Constants FMAC Exported Constants
* @{
*/
/** @defgroup FMAC_Error_Code FMAC Error code
* @{
*/
#define HAL_FMAC_ERROR_NONE 0x00000000UL /*!< No error */
#define HAL_FMAC_ERROR_SAT 0x00000001UL /*!< Saturation error */
#define HAL_FMAC_ERROR_UNFL 0x00000002UL /*!< Underflow error */
#define HAL_FMAC_ERROR_OVFL 0x00000004UL /*!< Overflow error */
#define HAL_FMAC_ERROR_DMA 0x00000008UL /*!< DMA error */
#define HAL_FMAC_ERROR_RESET 0x00000010UL /*!< Reset error */
#define HAL_FMAC_ERROR_PARAM 0x00000020UL /*!< Parameter error */
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
#define HAL_FMAC_ERROR_INVALID_CALLBACK 0x00000040UL /*!< Invalid Callback error */
#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
#define HAL_FMAC_ERROR_TIMEOUT 0x00000080UL /*!< Timeout error */
/**
* @}
*/
/** @defgroup FMAC_Functions FMAC Functions
* @{
*/
#define FMAC_FUNC_LOAD_X1 ((uint32_t)(FMAC_PARAM_FUNC_0)) /*!< Load X1 buffer */
#define FMAC_FUNC_LOAD_X2 ((uint32_t)(FMAC_PARAM_FUNC_1)) /*!< Load X2 buffer */
#define FMAC_FUNC_LOAD_Y ((uint32_t)(FMAC_PARAM_FUNC_1 | FMAC_PARAM_FUNC_0)) /*!< Load Y buffer */
#define FMAC_FUNC_CONVO_FIR ((uint32_t)(FMAC_PARAM_FUNC_3)) /*!< Convolution (FIR filter) */
#define FMAC_FUNC_IIR_DIRECT_FORM_1 ((uint32_t)(FMAC_PARAM_FUNC_3 | FMAC_PARAM_FUNC_0)) /*!< IIR filter (direct form 1) */
/**
* @}
*/
/** @defgroup FMAC_Data_Buffer_Threshold FMAC Data Buffer Threshold
* @{
* @note This parameter sets a watermark for buffer full (input) or buffer empty (output).
*/
#define FMAC_THRESHOLD_1 0x00000000UL /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 1.
Output: Buffer empty flag set if the number of unread values in the buffer is less than 1. */
#define FMAC_THRESHOLD_2 0x01000000UL /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 2.
Output: Buffer empty flag set if the number of unread values in the buffer is less than 2. */
#define FMAC_THRESHOLD_4 0x02000000UL /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 4.
Output: Buffer empty flag set if the number of unread values in the buffer is less than 4. */
#define FMAC_THRESHOLD_8 0x03000000UL /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 8.
Output: Buffer empty flag set if the number of unread values in the buffer is less than 8. */
#define FMAC_THRESHOLD_NO_VALUE 0xFFFFFFFFUL /*!< The configured threshold value shouldn't be changed */
/**
* @}
*/
/** @defgroup FMAC_Buffer_Access FMAC Buffer Access
* @{
*/
#define FMAC_BUFFER_ACCESS_NONE 0x00U /*!< Buffer handled by an external IP (ADC for instance) */
#define FMAC_BUFFER_ACCESS_DMA 0x01U /*!< Buffer accessed through the FMAC DMA */
#define FMAC_BUFFER_ACCESS_POLLING 0x02U /*!< Buffer accessed through polling */
#define FMAC_BUFFER_ACCESS_IT 0x03U /*!< Buffer accessed through interruptions */
/**
* @}
*/
/** @defgroup FMAC_Clip_State FMAC Clip State
* @{
*/
#define FMAC_CLIP_DISABLED 0x00000000UL /*!< Clipping disabled */
#define FMAC_CLIP_ENABLED FMAC_CR_CLIPEN /*!< Clipping enabled */
/**
* @}
*/
/** @defgroup FMAC_Flags FMAC status flags
* @{
*/
#define FMAC_FLAG_YEMPTY FMAC_SR_YEMPTY /*!< Y Buffer Empty Flag */
#define FMAC_FLAG_X1FULL FMAC_SR_X1FULL /*!< X1 Buffer Full Flag */
#define FMAC_FLAG_OVFL FMAC_SR_OVFL /*!< Overflow Error Flag */
#define FMAC_FLAG_UNFL FMAC_SR_UNFL /*!< Underflow Error Flag */
#define FMAC_FLAG_SAT FMAC_SR_SAT /*!< Saturation Error Flag (this helps in debugging a filter) */
/**
* @}
*/
/** @defgroup FMAC_Interrupts_Enable FMAC Interrupts Enable bit
* @{
*/
#define FMAC_IT_RIEN FMAC_CR_RIEN /*!< Read Interrupt Enable */
#define FMAC_IT_WIEN FMAC_CR_WIEN /*!< Write Interrupt Enable */
#define FMAC_IT_OVFLIEN FMAC_CR_OVFLIEN /*!< Overflow Error Interrupt Enable */
#define FMAC_IT_UNFLIEN FMAC_CR_UNFLIEN /*!< Underflow Error Interrupt Enable */
#define FMAC_IT_SATIEN FMAC_CR_SATIEN /*!< Saturation Error Interrupt Enable (this helps in debugging a filter) */
/**
* @}
*/
/** @defgroup FMAC_DMAR DMA Read Request Enable bit
* @{
*/
#define FMAC_DMA_REN FMAC_CR_DMAREN /*!< DMA Read Requests Enable */
/**
* @}
*/
/** @defgroup FMAC_DMAW DMA Write Request Enable bit
* @{
*/
#define FMAC_DMA_WEN FMAC_CR_DMAWEN /*!< DMA Write Channel Enable */
/**
* @}
*/
/** @defgroup FMAC_DMAS DMA START bit
* @{
*/
#define FMAC_START FMAC_PARAM_START /*!< DMA Start */
/**
* @}
*/
/** @defgroup FMAC_TimeOut_Value FMAC polling-based communications time-out value
* @{
*/
#define HAL_FMAC_TIMEOUT_VALUE 1000UL /*!< FMAC polling-based communications time-out value */
/**
* @}
*/
/** @defgroup FMAC_Reset_TimeOut_Value FMAC reset time-out value
* @{
*/
#define HAL_FMAC_RESET_TIMEOUT_VALUE 500UL /*!< FMAC reset time-out value */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FMAC_Exported_Macros FMAC Exported Macros
* @{
*/
/** @brief Reset FMAC handle state.
* @param __HANDLE__ FMAC handle.
* @retval None
*/
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
#define __HAL_FMAC_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_FMAC_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0U)
#else
#define __HAL_FMAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMAC_STATE_RESET)
#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
/**
* @brief Enable the FMAC interrupt when result is ready
* @param __HANDLE__ FMAC handle.
* @param __INTERRUPT__ FMAC Interrupt.
* This parameter can be one of the following values:
* @arg @ref FMAC_IT_RIEN Read interrupt enable
* @arg @ref FMAC_IT_WIEN Write interrupt enable
* @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
* @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
* @arg @ref FMAC_IT_SATIEN Saturation error interrupt enable (this helps in debugging a filter)
* @retval None
*/
#define __HAL_FMAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \
(((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
/**
* @brief Disable the FMAC interrupt
* @param __HANDLE__ FMAC handle.
* @param __INTERRUPT__ FMAC Interrupt.
* This parameter can be one of the following values:
* @arg @ref FMAC_IT_RIEN Read interrupt enable
* @arg @ref FMAC_IT_WIEN Write interrupt enable
* @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
* @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
* @arg @ref FMAC_IT_SATIEN Saturation error interrupt enable (this helps in debugging a filter)
* @retval None
*/
#define __HAL_FMAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \
(((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
/** @brief Check whether the specified FMAC interrupt occurred or not.
* @param __HANDLE__ FMAC handle.
* @param __INTERRUPT__ FMAC interrupt to check.
* This parameter can be one of the following values:
* @arg @ref FMAC_FLAG_YEMPTY Y Buffer Empty Flag
* @arg @ref FMAC_FLAG_X1FULL X1 Buffer Full Flag
* @arg @ref FMAC_FLAG_OVFL Overflow Error Flag
* @arg @ref FMAC_FLAG_UNFL Underflow Error Flag
* @arg @ref FMAC_FLAG_SAT Saturation Error Flag
* @retval SET (interrupt occurred) or RESET (interrupt did not occurred)
*/
#define __HAL_FMAC_GET_IT(__HANDLE__, __INTERRUPT__) \
(((__HANDLE__)->Instance->SR) &= ~(__INTERRUPT__))
/** @brief Clear specified FMAC interrupt status. Dummy macro as the
interrupt status flags are read-only.
* @param __HANDLE__ FMAC handle.
* @param __INTERRUPT__ FMAC interrupt to clear.
* @retval None
*/
#define __HAL_FMAC_CLEAR_IT(__HANDLE__, __INTERRUPT__) /* Dummy macro */
/** @brief Check whether the specified FMAC status flag is set or not.
* @param __HANDLE__ FMAC handle.
* @param __FLAG__ FMAC flag to check.
* This parameter can be one of the following values:
* @arg @ref FMAC_FLAG_YEMPTY Y Buffer Empty Flag
* @arg @ref FMAC_FLAG_X1FULL X1 Buffer Full Flag
* @arg @ref FMAC_FLAG_OVFL Overflow Error Flag
* @arg @ref FMAC_FLAG_UNFL Underflow Error Flag
* @arg @ref FMAC_FLAG_SAT Saturation error Flag
* @retval SET (flag is set) or RESET (flag is reset)
*/
#define __HAL_FMAC_GET_FLAG(__HANDLE__, __FLAG__) \
((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clear specified FMAC status flag. Dummy macro as no
flag can be cleared.
* @param __HANDLE__ FMAC handle.
* @param __FLAG__ FMAC flag to clear.
* @retval None
*/
#define __HAL_FMAC_CLEAR_FLAG(__HANDLE__, __FLAG__) /* Dummy macro */
/** @brief Check whether the specified FMAC interrupt is enabled or not.
* @param __HANDLE__ FMAC handle.
* @param __INTERRUPT__ FMAC interrupt to check.
* This parameter can be one of the following values:
* @arg @ref FMAC_IT_RIEN Read interrupt enable
* @arg @ref FMAC_IT_WIEN Write interrupt enable
* @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
* @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
* @arg @ref FMAC_IT_SATIEN Saturation error interrupt enable (this helps in debugging a filter)
* @retval FlagStatus
*/
#define __HAL_FMAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
(((__HANDLE__)->Instance->CR) & (__INTERRUPT__))
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @addtogroup FMAC_Private_Macros
* @{
*/
/**
* @brief Verify the FMAC function.
* @param __FUNCTION__ ID of the function.
* @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
*/
#define IS_FMAC_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1) || \
((__FUNCTION__) == FMAC_FUNC_LOAD_X2) || \
((__FUNCTION__) == FMAC_FUNC_LOAD_Y) || \
((__FUNCTION__) == FMAC_FUNC_CONVO_FIR) || \
((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1))
/**
* @brief Verify the FMAC load function.
* @param __FUNCTION__ ID of the load function.
* @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
*/
#define IS_FMAC_LOAD_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1) || \
((__FUNCTION__) == FMAC_FUNC_LOAD_X2) || \
((__FUNCTION__) == FMAC_FUNC_LOAD_Y))
/**
* @brief Verify the FMAC load function.
* @param __FUNCTION__ ID of the load function.
* @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
*/
#define IS_FMAC_N_LOAD_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1) || \
((__FUNCTION__) == FMAC_FUNC_LOAD_Y))
/**
* @brief Verify the FMAC load function.
* @param __FUNCTION__ ID of the load function.
* @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
*/
#define IS_FMAC_N_M_LOAD_FUNCTION(__FUNCTION__) ((__FUNCTION__) == FMAC_FUNC_LOAD_X2)
/**
* @brief Verify the FMAC filter function.
* @param __FUNCTION__ ID of the filter function.
* @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
*/
#define IS_FMAC_FILTER_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR) || \
((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1))
/**
* @brief Verify the FMAC threshold.
* @param __THRESHOLD__ Value of the threshold.
* @retval SET (__THRESHOLD__ is a valid value) or RESET (__THRESHOLD__ is invalid)
*/
#define IS_FMAC_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == FMAC_THRESHOLD_1) || \
((__THRESHOLD__) == FMAC_THRESHOLD_2) || \
((__THRESHOLD__) == FMAC_THRESHOLD_4) || \
((__THRESHOLD__) == FMAC_THRESHOLD_NO_VALUE) || \
((__THRESHOLD__) == FMAC_THRESHOLD_8))
/**
* @brief Verify the FMAC filter parameter P.
* @param __P__ Value of the filter parameter P.
* @param __FUNCTION__ ID of the filter function.
* @retval SET (__P__ is a valid value) or RESET (__P__ is invalid)
*/
#define IS_FMAC_PARAM_P(__FUNCTION__, __P__) ( (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR) && \
(((__P__) >= 2U) && ((__P__) <= 127U))) || \
(((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1) && \
(((__P__) >= 2U) && ((__P__) <= 64U))) )
/**
* @brief Verify the FMAC filter parameter Q.
* @param __Q__ Value of the filter parameter Q.
* @param __FUNCTION__ ID of the filter function.
* @retval SET (__Q__ is a valid value) or RESET (__Q__ is invalid)
*/
#define IS_FMAC_PARAM_Q(__FUNCTION__, __Q__) ( ((__FUNCTION__) == FMAC_FUNC_CONVO_FIR) || \
(((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1) && \
(((__Q__) >= 1U) && ((__Q__) <= 63U))) )
/**
* @brief Verify the FMAC filter parameter R.
* @param __R__ Value of the filter parameter.
* @param __FUNCTION__ ID of the filter function.
* @retval SET (__R__ is a valid value) or RESET (__R__ is invalid)
*/
#define IS_FMAC_PARAM_R(__FUNCTION__, __R__) ( (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR) || \
((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1)) && \
((__R__) <= 7U))
/**
* @brief Verify the FMAC buffer access.
* @param __BUFFER_ACCESS__ Type of access.
* @retval SET (__BUFFER_ACCESS__ is a valid value) or RESET (__BUFFER_ACCESS__ is invalid)
*/
#define IS_FMAC_BUFFER_ACCESS(__BUFFER_ACCESS__) (((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_NONE) || \
((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_DMA) || \
((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_POLLING) || \
((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_IT))
/**
* @brief Verify the FMAC clip feature.
* @param __CLIP_STATE__ Clip state.
* @retval SET (__CLIP_STATE__ is a valid value) or RESET (__CLIP_STATE__ is invalid)
*/
#define IS_FMAC_CLIP_STATE(__CLIP_STATE__) (((__CLIP_STATE__) == FMAC_CLIP_DISABLED) || \
((__CLIP_STATE__) == FMAC_CLIP_ENABLED))
/**
* @}
*/
/* Exported functions ------------------------------------------------------- */
/** @addtogroup FMAC_Exported_Functions
* @{
*/
/** @addtogroup FMAC_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_FMAC_Init(FMAC_HandleTypeDef *hfmac);
HAL_StatusTypeDef HAL_FMAC_DeInit(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_MspInit(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_MspDeInit(FMAC_HandleTypeDef *hfmac);
#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
/* Callbacks Register/UnRegister functions ***********************************/
HAL_StatusTypeDef HAL_FMAC_RegisterCallback(FMAC_HandleTypeDef *hfmac, HAL_FMAC_CallbackIDTypeDef CallbackID,
pFMAC_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_FMAC_UnRegisterCallback(FMAC_HandleTypeDef *hfmac, HAL_FMAC_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup FMAC_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_FMAC_FilterConfig(FMAC_HandleTypeDef *hfmac, FMAC_FilterConfigTypeDef *sConfig);
HAL_StatusTypeDef HAL_FMAC_FilterConfig_DMA(FMAC_HandleTypeDef *hfmac, FMAC_FilterConfigTypeDef *sConfig);
HAL_StatusTypeDef HAL_FMAC_FilterPreload(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint8_t InputSize,
int16_t *pOutput, uint8_t OutputSize);
HAL_StatusTypeDef HAL_FMAC_FilterPreload_DMA(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint8_t InputSize,
int16_t *pOutput, uint8_t OutputSize);
HAL_StatusTypeDef HAL_FMAC_FilterStart(FMAC_HandleTypeDef *hfmac, int16_t *pOutput, uint16_t *pOutputSize);
HAL_StatusTypeDef HAL_FMAC_AppendFilterData(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint16_t *pInputSize);
HAL_StatusTypeDef HAL_FMAC_ConfigFilterOutputBuffer(FMAC_HandleTypeDef *hfmac, int16_t *pOutput, uint16_t *pOutputSize);
HAL_StatusTypeDef HAL_FMAC_PollFilterData(FMAC_HandleTypeDef *hfmac, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMAC_FilterStop(FMAC_HandleTypeDef *hfmac);
/**
* @}
*/
/** @addtogroup FMAC_Exported_Functions_Group3
* @{
*/
/* Callback functions *********************************************************/
void HAL_FMAC_ErrorCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_HalfGetDataCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_GetDataCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_HalfOutputDataReadyCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_OutputDataReadyCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_FilterConfigCallback(FMAC_HandleTypeDef *hfmac);
void HAL_FMAC_FilterPreloadCallback(FMAC_HandleTypeDef *hfmac);
/**
* @}
*/
/** @addtogroup FMAC_Exported_Functions_Group4
* @{
*/
/* IRQ handler management *****************************************************/
void HAL_FMAC_IRQHandler(FMAC_HandleTypeDef *hfmac);
/**
* @}
*/
/** @addtogroup FMAC_Exported_Functions_Group5
* @{
*/
/* Peripheral State functions *************************************************/
HAL_FMAC_StateTypeDef HAL_FMAC_GetState(FMAC_HandleTypeDef *hfmac);
uint32_t HAL_FMAC_GetError(FMAC_HandleTypeDef *hfmac);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* FMAC */
#ifdef __cplusplus
}
#endif
#endif /* STM32H7xx_HAL_FMAC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/