blob: 1e5953c5021bc2bb5f85572aa76ff0e7901c7b5f [file] [log] [blame]
/**
******************************************************************************
* @file stm32h7xx_ll_hsem.h
* @author MCD Application Team
* @brief Header file of HSEM LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_LL_HSEM_H
#define STM32H7xx_LL_HSEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx.h"
/** @addtogroup STM32H7xx_LL_Driver
* @{
*/
#if defined(HSEM)
/** @defgroup HSEM_LL HSEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HSEM_LL_Exported_Constants HSEM Exported Constants
* @{
*/
/** @defgroup HSEM_LL_EC_COREID COREID Defines
* @{
*/
#define LL_HSEM_COREID_NONE 0U
#define LL_HSEM_COREID_CPU1 HSEM_CR_COREID_CPU1
#if defined(DUAL_CORE)
#define LL_HSEM_COREID_CPU2 HSEM_CR_COREID_CPU2
#endif /* DUAL_CORE */
#define LL_HSEM_COREID HSEM_CR_COREID_CURRENT
/**
* @}
*/
/** @defgroup HSEM_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_HSEM_ReadReg function
* @{
*/
#define LL_HSEM_SEMAPHORE_0 HSEM_C1IER_ISE0
#define LL_HSEM_SEMAPHORE_1 HSEM_C1IER_ISE1
#define LL_HSEM_SEMAPHORE_2 HSEM_C1IER_ISE2
#define LL_HSEM_SEMAPHORE_3 HSEM_C1IER_ISE3
#define LL_HSEM_SEMAPHORE_4 HSEM_C1IER_ISE4
#define LL_HSEM_SEMAPHORE_5 HSEM_C1IER_ISE5
#define LL_HSEM_SEMAPHORE_6 HSEM_C1IER_ISE6
#define LL_HSEM_SEMAPHORE_7 HSEM_C1IER_ISE7
#define LL_HSEM_SEMAPHORE_8 HSEM_C1IER_ISE8
#define LL_HSEM_SEMAPHORE_9 HSEM_C1IER_ISE9
#define LL_HSEM_SEMAPHORE_10 HSEM_C1IER_ISE10
#define LL_HSEM_SEMAPHORE_11 HSEM_C1IER_ISE11
#define LL_HSEM_SEMAPHORE_12 HSEM_C1IER_ISE12
#define LL_HSEM_SEMAPHORE_13 HSEM_C1IER_ISE13
#define LL_HSEM_SEMAPHORE_14 HSEM_C1IER_ISE14
#define LL_HSEM_SEMAPHORE_15 HSEM_C1IER_ISE15
#if (HSEM_SEMID_MAX == 15)
#define LL_HSEM_SEMAPHORE_ALL 0x0000FFFFU
#else /* HSEM_SEMID_MAX == 31 */
#define LL_HSEM_SEMAPHORE_16 HSEM_C1IER_ISE16
#define LL_HSEM_SEMAPHORE_17 HSEM_C1IER_ISE17
#define LL_HSEM_SEMAPHORE_18 HSEM_C1IER_ISE18
#define LL_HSEM_SEMAPHORE_19 HSEM_C1IER_ISE19
#define LL_HSEM_SEMAPHORE_20 HSEM_C1IER_ISE20
#define LL_HSEM_SEMAPHORE_21 HSEM_C1IER_ISE21
#define LL_HSEM_SEMAPHORE_22 HSEM_C1IER_ISE22
#define LL_HSEM_SEMAPHORE_23 HSEM_C1IER_ISE23
#define LL_HSEM_SEMAPHORE_24 HSEM_C1IER_ISE24
#define LL_HSEM_SEMAPHORE_25 HSEM_C1IER_ISE25
#define LL_HSEM_SEMAPHORE_26 HSEM_C1IER_ISE26
#define LL_HSEM_SEMAPHORE_27 HSEM_C1IER_ISE27
#define LL_HSEM_SEMAPHORE_28 HSEM_C1IER_ISE28
#define LL_HSEM_SEMAPHORE_29 HSEM_C1IER_ISE29
#define LL_HSEM_SEMAPHORE_30 HSEM_C1IER_ISE30
#define LL_HSEM_SEMAPHORE_31 HSEM_C1IER_ISE31
#define LL_HSEM_SEMAPHORE_ALL 0xFFFFFFFFU
#endif /* HSEM_SEMID_MAX == 15 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup HSEM_LL_Exported_Macros HSEM Exported Macros
* @{
*/
/** @defgroup HSEM_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in HSEM register
* @param __INSTANCE__ HSEM Instance
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_HSEM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
/**
* @brief Read a value in HSEM register
* @param __INSTANCE__ HSEM Instance
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_HSEM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup HSEM_LL_Exported_Functions HSEM Exported Functions
* @{
*/
/** @defgroup HSEM_LL_EF_Data_Management Data_Management
* @{
*/
/**
* @brief Return 1 if the semaphore is locked, else return 0.
* @rmtoll R LOCK LL_HSEM_IsSemaphoreLocked
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsSemaphoreLocked(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
{
return ((READ_BIT(HSEMx->R[Semaphore], HSEM_R_LOCK) == (HSEM_R_LOCK_Msk)) ? 1UL : 0UL);
}
/**
* @brief Get core id.
* @rmtoll R COREID LL_HSEM_GetCoreId
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @retval Returned value can be one of the following values:
* @arg @ref LL_HSEM_COREID_NONE
* @arg @ref LL_HSEM_COREID_CPU1
* @arg @ref LL_HSEM_COREID_CPU2
*/
__STATIC_INLINE uint32_t LL_HSEM_GetCoreId(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
{
return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_COREID_Msk));
}
/**
* @brief Get process id.
* @rmtoll R PROCID LL_HSEM_GetProcessId
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @retval Process number. Value between Min_Data=0 and Max_Data=255
*/
__STATIC_INLINE uint32_t LL_HSEM_GetProcessId(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
{
return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_PROCID_Msk));
}
/**
* @brief Get the lock by writing in R register.
* @note The R register has to be read to determined if the lock is taken.
* @rmtoll R LOCK LL_HSEM_SetLock
* @rmtoll R COREID LL_HSEM_SetLock
* @rmtoll R PROCID LL_HSEM_SetLock
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @param process Process id. Value between Min_Data=0 and Max_Data=255
* @retval None
*/
__STATIC_INLINE void LL_HSEM_SetLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
{
WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process));
}
/**
* @brief Get the lock with 2-step lock.
* @rmtoll R LOCK LL_HSEM_2StepLock
* @rmtoll R COREID LL_HSEM_2StepLock
* @rmtoll R PROCID LL_HSEM_2StepLock
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @param process Process id. Value between Min_Data=0 and Max_Data=255
* @retval 1 lock fail, 0 lock successful or already locked by same process and core
*/
__STATIC_INLINE uint32_t LL_HSEM_2StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
{
WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process));
return ((HSEMx->R[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID | process)) ? 1UL : 0UL);
}
/**
* @brief Get the lock with 1-step lock.
* @rmtoll RLR LOCK LL_HSEM_1StepLock
* @rmtoll RLR COREID LL_HSEM_1StepLock
* @rmtoll RLR PROCID LL_HSEM_1StepLock
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @retval 1 lock fail, 0 lock successful or already locked by same core
*/
__STATIC_INLINE uint32_t LL_HSEM_1StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
{
return ((HSEMx->RLR[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID)) ? 1UL : 0UL);
}
/**
* @brief Release the lock of the semaphore.
* @note In case of LL_HSEM_1StepLock usage to lock a semaphore, the process is 0.
* @rmtoll R LOCK LL_HSEM_ReleaseLock
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @param process Process number. Value between Min_Data=0 and Max_Data=255
* @retval None
*/
__STATIC_INLINE void LL_HSEM_ReleaseLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process)
{
WRITE_REG(HSEMx->R[Semaphore], (LL_HSEM_COREID | process));
}
/**
* @brief Get the lock status of the semaphore.
* @rmtoll R LOCK LL_HSEM_GetStatus
* @param HSEMx HSEM Instance.
* @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31
* @retval 0 semaphore is free, 1 semaphore is locked */
__STATIC_INLINE uint32_t LL_HSEM_GetStatus(HSEM_TypeDef *HSEMx, uint32_t Semaphore)
{
return ((HSEMx->R[Semaphore] != 0U) ? 1UL : 0UL);
}
/**
* @brief Set the key.
* @rmtoll KEYR KEY LL_HSEM_SetKey
* @param HSEMx HSEM Instance.
* @param key Key value.
* @retval None
*/
__STATIC_INLINE void LL_HSEM_SetKey(HSEM_TypeDef *HSEMx, uint32_t key)
{
WRITE_REG(HSEMx->KEYR, key << HSEM_KEYR_KEY_Pos);
}
/**
* @brief Get the key.
* @rmtoll KEYR KEY LL_HSEM_GetKey
* @param HSEMx HSEM Instance.
* @retval key to unlock all semaphore from the same core
*/
__STATIC_INLINE uint32_t LL_HSEM_GetKey(HSEM_TypeDef *HSEMx)
{
return (uint32_t)(READ_BIT(HSEMx->KEYR, HSEM_KEYR_KEY) >> HSEM_KEYR_KEY_Pos);
}
/**
* @brief Release all semaphore with the same core id.
* @rmtoll CR KEY LL_HSEM_ResetAllLock
* @param HSEMx HSEM Instance.
* @param key Key value.
* @param core This parameter can be one of the following values:
* @arg @ref LL_HSEM_COREID_CPU1
* @arg @ref LL_HSEM_COREID_CPU2
* @retval None
*/
__STATIC_INLINE void LL_HSEM_ResetAllLock(HSEM_TypeDef *HSEMx, uint32_t key, uint32_t core)
{
WRITE_REG(HSEMx->CR, (key << HSEM_CR_KEY_Pos) | core);
}
/**
* @}
*/
/** @defgroup HSEM_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable interrupt.
* @rmtoll C1IER ISEM LL_HSEM_EnableIT_C1IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval None
*/
__STATIC_INLINE void LL_HSEM_EnableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
SET_BIT(HSEMx->C1IER, SemaphoreMask);
}
/**
* @brief Disable interrupt.
* @rmtoll C1IER ISEM LL_HSEM_DisableIT_C1IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval None
*/
__STATIC_INLINE void LL_HSEM_DisableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
CLEAR_BIT(HSEMx->C1IER, SemaphoreMask);
}
/**
* @brief Check if interrupt is enabled.
* @rmtoll C1IER ISEM LL_HSEM_IsEnabledIT_C1IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C1IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
#if defined(DUAL_CORE)
/**
* @brief Enable interrupt.
* @rmtoll C2IER ISEM LL_HSEM_EnableIT_C2IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval None
*/
__STATIC_INLINE void LL_HSEM_EnableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
SET_BIT(HSEMx->C2IER, SemaphoreMask);
}
/**
* @brief Disable interrupt.
* @rmtoll C2IER ISEM LL_HSEM_DisableIT_C2IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval None
*/
__STATIC_INLINE void LL_HSEM_DisableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
CLEAR_BIT(HSEMx->C2IER, SemaphoreMask);
}
/**
* @brief Check if interrupt is enabled.
* @rmtoll C2IER ISEM LL_HSEM_IsEnabledIT_C2IER
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C2IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
#endif /* DUAL_CORE */
/**
* @}
*/
/** @defgroup HSEM_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Clear interrupt status.
* @rmtoll C1ICR ISEM LL_HSEM_ClearFlag_C1ICR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval None
*/
__STATIC_INLINE void LL_HSEM_ClearFlag_C1ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
WRITE_REG(HSEMx->C1ICR, SemaphoreMask);
}
/**
* @brief Get interrupt status from ISR register.
* @rmtoll C1ISR ISEM LL_HSEM_IsActiveFlag_C1ISR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C1ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
/**
* @brief Get interrupt status from MISR register.
* @rmtoll C1MISR ISEM LL_HSEM_IsActiveFlag_C1MISR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31
* depends on devices.
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C1MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
#if defined(DUAL_CORE)
/**
* @brief Clear interrupt status.
* @rmtoll C2ICR ISEM LL_HSEM_ClearFlag_C2ICR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval None
*/
__STATIC_INLINE void LL_HSEM_ClearFlag_C2ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
WRITE_REG(HSEMx->C2ICR, SemaphoreMask);
}
/**
* @brief Get interrupt status from ISR register.
* @rmtoll C2ISR ISEM LL_HSEM_IsActiveFlag_C2ISR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C2ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
/**
* @brief Get interrupt status from MISR register.
* @rmtoll C2MISR ISEM LL_HSEM_IsActiveFlag_C2MISR
* @param HSEMx HSEM Instance.
* @param SemaphoreMask This parameter can be a combination of the following values:
* @arg @ref LL_HSEM_SEMAPHORE_0
* @arg @ref LL_HSEM_SEMAPHORE_1
* @arg @ref LL_HSEM_SEMAPHORE_2
* @arg @ref LL_HSEM_SEMAPHORE_3
* @arg @ref LL_HSEM_SEMAPHORE_4
* @arg @ref LL_HSEM_SEMAPHORE_5
* @arg @ref LL_HSEM_SEMAPHORE_6
* @arg @ref LL_HSEM_SEMAPHORE_7
* @arg @ref LL_HSEM_SEMAPHORE_8
* @arg @ref LL_HSEM_SEMAPHORE_9
* @arg @ref LL_HSEM_SEMAPHORE_10
* @arg @ref LL_HSEM_SEMAPHORE_11
* @arg @ref LL_HSEM_SEMAPHORE_12
* @arg @ref LL_HSEM_SEMAPHORE_13
* @arg @ref LL_HSEM_SEMAPHORE_14
* @arg @ref LL_HSEM_SEMAPHORE_15
* @arg @ref LL_HSEM_SEMAPHORE_16
* @arg @ref LL_HSEM_SEMAPHORE_17
* @arg @ref LL_HSEM_SEMAPHORE_18
* @arg @ref LL_HSEM_SEMAPHORE_19
* @arg @ref LL_HSEM_SEMAPHORE_20
* @arg @ref LL_HSEM_SEMAPHORE_21
* @arg @ref LL_HSEM_SEMAPHORE_22
* @arg @ref LL_HSEM_SEMAPHORE_23
* @arg @ref LL_HSEM_SEMAPHORE_24
* @arg @ref LL_HSEM_SEMAPHORE_25
* @arg @ref LL_HSEM_SEMAPHORE_26
* @arg @ref LL_HSEM_SEMAPHORE_27
* @arg @ref LL_HSEM_SEMAPHORE_28
* @arg @ref LL_HSEM_SEMAPHORE_29
* @arg @ref LL_HSEM_SEMAPHORE_30
* @arg @ref LL_HSEM_SEMAPHORE_31
* @arg @ref LL_HSEM_SEMAPHORE_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask)
{
return ((READ_BIT(HSEMx->C2MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL);
}
#endif /* DUAL_CORE */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(HSEM) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32H7xx_LL_HSEM_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/