blob: 54d3ad007d9f806d12a8a46b7a4a45bf98117b7e [file] [log] [blame]
/**
******************************************************************************
* @file stm32l1xx_hal.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L1xx_HAL_H
#define __STM32L1xx_HAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx_hal_conf.h"
/** @addtogroup STM32L1xx_HAL_Driver
* @{
*/
/** @addtogroup HAL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup HAL_Exported_Constants HAL Exported Constants
* @{
*/
/** @defgroup HAL_TICK_FREQ Tick Frequency
* @{
*/
#define HAL_TICK_FREQ_10HZ 100U
#define HAL_TICK_FREQ_100HZ 10U
#define HAL_TICK_FREQ_1KHZ 1U
#define HAL_TICK_FREQ_DEFAULT HAL_TICK_FREQ_1KHZ
#define IS_TICKFREQ(__FREQ__) (((__FREQ__) == HAL_TICK_FREQ_10HZ) || \
((__FREQ__) == HAL_TICK_FREQ_100HZ) || \
((__FREQ__) == HAL_TICK_FREQ_1KHZ))
/**
* @}
*/
/**
* @}
*/
/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants
* @{
*/
/** @defgroup SYSCFG_Constants SYSCFG: SYStem ConFiG
* @{
*/
/** @defgroup SYSCFG_BootMode Boot Mode
* @{
*/
#define SYSCFG_BOOT_MAINFLASH (0x00000000U)
#define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_0)
#if defined(FSMC_R_BASE)
#define SYSCFG_BOOT_FSMC ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_1)
#endif /* FSMC_R_BASE */
#define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE)
/**
* @}
*/
/**
* @}
*/
/** @defgroup RI_Constants RI: Routing Interface
* @{
*/
/** @defgroup RI_InputCapture Input Capture
* @{
*/
#define RI_INPUTCAPTURE_IC1 RI_ICR_IC1 /*!< Input Capture 1 */
#define RI_INPUTCAPTURE_IC2 RI_ICR_IC2 /*!< Input Capture 2 */
#define RI_INPUTCAPTURE_IC3 RI_ICR_IC3 /*!< Input Capture 3 */
#define RI_INPUTCAPTURE_IC4 RI_ICR_IC4 /*!< Input Capture 4 */
/**
* @}
*/
/** @defgroup TIM_Select TIM Select
* @{
*/
#define TIM_SELECT_NONE (0x00000000U) /*!< None selected */
#define TIM_SELECT_TIM2 ((uint32_t)RI_ICR_TIM_0) /*!< Timer 2 selected */
#define TIM_SELECT_TIM3 ((uint32_t)RI_ICR_TIM_1) /*!< Timer 3 selected */
#define TIM_SELECT_TIM4 ((uint32_t)RI_ICR_TIM) /*!< Timer 4 selected */
#define IS_RI_TIM(__TIM__) (((__TIM__) == TIM_SELECT_NONE) || \
((__TIM__) == TIM_SELECT_TIM2) || \
((__TIM__) == TIM_SELECT_TIM3) || \
((__TIM__) == TIM_SELECT_TIM4))
/**
* @}
*/
/** @defgroup RI_InputCaptureRouting Input Capture Routing
* @{
*/
/* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */
#define RI_INPUTCAPTUREROUTING_0 (0x00000000U) /* PA0 PA1 PA2 PA3 */
#define RI_INPUTCAPTUREROUTING_1 (0x00000001U) /* PA4 PA5 PA6 PA7 */
#define RI_INPUTCAPTUREROUTING_2 (0x00000002U) /* PA8 PA9 PA10 PA11 */
#define RI_INPUTCAPTUREROUTING_3 (0x00000003U) /* PA12 PA13 PA14 PA15 */
#define RI_INPUTCAPTUREROUTING_4 (0x00000004U) /* PC0 PC1 PC2 PC3 */
#define RI_INPUTCAPTUREROUTING_5 (0x00000005U) /* PC4 PC5 PC6 PC7 */
#define RI_INPUTCAPTUREROUTING_6 (0x00000006U) /* PC8 PC9 PC10 PC11 */
#define RI_INPUTCAPTUREROUTING_7 (0x00000007U) /* PC12 PC13 PC14 PC15 */
#define RI_INPUTCAPTUREROUTING_8 (0x00000008U) /* PD0 PD1 PD2 PD3 */
#define RI_INPUTCAPTUREROUTING_9 (0x00000009U) /* PD4 PD5 PD6 PD7 */
#define RI_INPUTCAPTUREROUTING_10 (0x0000000AU) /* PD8 PD9 PD10 PD11 */
#define RI_INPUTCAPTUREROUTING_11 (0x0000000BU) /* PD12 PD13 PD14 PD15 */
#define RI_INPUTCAPTUREROUTING_12 (0x0000000CU) /* PE0 PE1 PE2 PE3 */
#define RI_INPUTCAPTUREROUTING_13 (0x0000000DU) /* PE4 PE5 PE6 PE7 */
#define RI_INPUTCAPTUREROUTING_14 (0x0000000EU) /* PE8 PE9 PE10 PE11 */
#define RI_INPUTCAPTUREROUTING_15 (0x0000000FU) /* PE12 PE13 PE14 PE15 */
#define IS_RI_INPUTCAPTURE_ROUTING(__ROUTING__) (((__ROUTING__) == RI_INPUTCAPTUREROUTING_0) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_1) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_2) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_3) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_4) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_5) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_6) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_7) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_8) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_9) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_10) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_11) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_12) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_13) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_14) || \
((__ROUTING__) == RI_INPUTCAPTUREROUTING_15))
/**
* @}
*/
/** @defgroup RI_IOSwitch IO Switch
* @{
*/
#define RI_ASCR1_REGISTER (0x80000000U)
/* ASCR1 I/O switch: bit 31 is set to '1' to indicate that the mask is in ASCR1 register */
#define RI_IOSWITCH_CH0 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_0)
#define RI_IOSWITCH_CH1 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_1)
#define RI_IOSWITCH_CH2 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_2)
#define RI_IOSWITCH_CH3 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_3)
#define RI_IOSWITCH_CH4 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_4)
#define RI_IOSWITCH_CH5 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_5)
#define RI_IOSWITCH_CH6 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_6)
#define RI_IOSWITCH_CH7 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_7)
#define RI_IOSWITCH_CH8 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_8)
#define RI_IOSWITCH_CH9 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_9)
#define RI_IOSWITCH_CH10 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_10)
#define RI_IOSWITCH_CH11 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_11)
#define RI_IOSWITCH_CH12 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_12)
#define RI_IOSWITCH_CH13 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_13)
#define RI_IOSWITCH_CH14 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_14)
#define RI_IOSWITCH_CH15 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_15)
#define RI_IOSWITCH_CH18 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_18)
#define RI_IOSWITCH_CH19 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_19)
#define RI_IOSWITCH_CH20 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_20)
#define RI_IOSWITCH_CH21 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_21)
#define RI_IOSWITCH_CH22 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_22)
#define RI_IOSWITCH_CH23 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_23)
#define RI_IOSWITCH_CH24 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_24)
#define RI_IOSWITCH_CH25 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_25)
#define RI_IOSWITCH_VCOMP ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_VCOMP) /* VCOMP (ADC channel 26) is an internal switch used to connect selected channel to COMP1 non inverting input */
#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */
#define RI_IOSWITCH_CH27 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_27)
#define RI_IOSWITCH_CH28 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_28)
#define RI_IOSWITCH_CH29 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_29)
#define RI_IOSWITCH_CH30 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_30)
#define RI_IOSWITCH_CH31 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_31)
#endif /* RI_ASCR2_CH1b */
/* ASCR2 IO switch: bit 31 is set to '0' to indicate that the mask is in ASCR2 register */
#define RI_IOSWITCH_GR10_1 ((uint32_t)RI_ASCR2_GR10_1)
#define RI_IOSWITCH_GR10_2 ((uint32_t)RI_ASCR2_GR10_2)
#define RI_IOSWITCH_GR10_3 ((uint32_t)RI_ASCR2_GR10_3)
#define RI_IOSWITCH_GR10_4 ((uint32_t)RI_ASCR2_GR10_4)
#define RI_IOSWITCH_GR6_1 ((uint32_t)RI_ASCR2_GR6_1)
#define RI_IOSWITCH_GR6_2 ((uint32_t)RI_ASCR2_GR6_2)
#define RI_IOSWITCH_GR5_1 ((uint32_t)RI_ASCR2_GR5_1)
#define RI_IOSWITCH_GR5_2 ((uint32_t)RI_ASCR2_GR5_2)
#define RI_IOSWITCH_GR5_3 ((uint32_t)RI_ASCR2_GR5_3)
#define RI_IOSWITCH_GR4_1 ((uint32_t)RI_ASCR2_GR4_1)
#define RI_IOSWITCH_GR4_2 ((uint32_t)RI_ASCR2_GR4_2)
#define RI_IOSWITCH_GR4_3 ((uint32_t)RI_ASCR2_GR4_3)
#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3, Cat.4 and Cat.5 */
#define RI_IOSWITCH_CH0b ((uint32_t)RI_ASCR2_CH0b)
#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */
#define RI_IOSWITCH_CH1b ((uint32_t)RI_ASCR2_CH1b)
#define RI_IOSWITCH_CH2b ((uint32_t)RI_ASCR2_CH2b)
#define RI_IOSWITCH_CH3b ((uint32_t)RI_ASCR2_CH3b)
#define RI_IOSWITCH_CH6b ((uint32_t)RI_ASCR2_CH6b)
#define RI_IOSWITCH_CH7b ((uint32_t)RI_ASCR2_CH7b)
#define RI_IOSWITCH_CH8b ((uint32_t)RI_ASCR2_CH8b)
#define RI_IOSWITCH_CH9b ((uint32_t)RI_ASCR2_CH9b)
#define RI_IOSWITCH_CH10b ((uint32_t)RI_ASCR2_CH10b)
#define RI_IOSWITCH_CH11b ((uint32_t)RI_ASCR2_CH11b)
#define RI_IOSWITCH_CH12b ((uint32_t)RI_ASCR2_CH12b)
#endif /* RI_ASCR2_CH1b */
#define RI_IOSWITCH_GR6_3 ((uint32_t)RI_ASCR2_GR6_3)
#define RI_IOSWITCH_GR6_4 ((uint32_t)RI_ASCR2_GR6_4)
#endif /* RI_ASCR2_CH0b */
#if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */
#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \
((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \
((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \
((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \
((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \
((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \
((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \
((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \
((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \
((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \
((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \
((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \
((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_CH27) || \
((__IOSWITCH__) == RI_IOSWITCH_CH28) || ((__IOSWITCH__) == RI_IOSWITCH_CH29) || \
((__IOSWITCH__) == RI_IOSWITCH_CH30) || ((__IOSWITCH__) == RI_IOSWITCH_CH31) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || \
((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || \
((__IOSWITCH__) == RI_IOSWITCH_GR6_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_4) || \
((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || \
((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || \
((__IOSWITCH__) == RI_IOSWITCH_CH0b) || ((__IOSWITCH__) == RI_IOSWITCH_CH1b) || \
((__IOSWITCH__) == RI_IOSWITCH_CH2b) || ((__IOSWITCH__) == RI_IOSWITCH_CH3b) || \
((__IOSWITCH__) == RI_IOSWITCH_CH6b) || ((__IOSWITCH__) == RI_IOSWITCH_CH7b) || \
((__IOSWITCH__) == RI_IOSWITCH_CH8b) || ((__IOSWITCH__) == RI_IOSWITCH_CH9b) || \
((__IOSWITCH__) == RI_IOSWITCH_CH10b) || ((__IOSWITCH__) == RI_IOSWITCH_CH11b) || \
((__IOSWITCH__) == RI_IOSWITCH_CH12b))
#else /* !RI_ASCR2_CH1b */
#if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3 */
#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \
((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \
((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \
((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \
((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \
((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \
((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \
((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \
((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \
((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \
((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \
((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \
((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \
((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \
((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || ((__IOSWITCH__) == RI_IOSWITCH_CH0b))
#else /* !RI_ASCR2_CH0b */ /* STM32L1 devices category Cat.1 and Cat.2 */
#define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \
((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \
((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \
((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \
((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \
((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \
((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \
((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \
((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \
((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \
((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \
((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \
((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \
((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \
((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \
((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \
((__IOSWITCH__) == RI_IOSWITCH_GR4_3))
#endif /* RI_ASCR2_CH0b */
#endif /* RI_ASCR2_CH1b */
/**
* @}
*/
/** @defgroup RI_Pin PIN define
* @{
*/
#define RI_PIN_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
#define RI_PIN_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
#define RI_PIN_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
#define RI_PIN_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
#define RI_PIN_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
#define RI_PIN_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
#define RI_PIN_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
#define RI_PIN_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
#define RI_PIN_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
#define RI_PIN_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
#define RI_PIN_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
#define RI_PIN_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
#define RI_PIN_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
#define RI_PIN_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
#define RI_PIN_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
#define RI_PIN_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
#define RI_PIN_ALL ((uint16_t)0xFFFF) /*!< All pins selected */
#define IS_RI_PIN(__PIN__) ((__PIN__) != (uint16_t)0x00)
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup HAL_Exported_Macros HAL Exported Macros
* @{
*/
/** @defgroup DBGMCU_Macros DBGMCU: Debug MCU
* @{
*/
/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
* @brief Freeze/Unfreeze Peripherals in Debug mode
* @{
*/
/**
* @brief TIM2 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP)
#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP)
#endif
/**
* @brief TIM3 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP)
#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP)
#endif
/**
* @brief TIM4 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM4_STOP)
#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP)
#endif
/**
* @brief TIM5 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP)
#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP)
#endif
/**
* @brief TIM6 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP)
#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP)
#endif
/**
* @brief TIM7 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP)
#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP)
#endif
/**
* @brief RTC Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP)
#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP)
#endif
/**
* @brief WWDG Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP)
#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP)
#endif
/**
* @brief IWDG Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP)
#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP)
#endif
/**
* @brief I2C1 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
#endif
/**
* @brief I2C2 Peripherals Debug mode
*/
#if defined (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
#endif
/**
* @brief TIM9 Peripherals Debug mode
*/
#if defined (DBGMCU_APB2_FZ_DBG_TIM9_STOP)
#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP)
#endif
/**
* @brief TIM10 Peripherals Debug mode
*/
#if defined (DBGMCU_APB2_FZ_DBG_TIM10_STOP)
#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP)
#endif
/**
* @brief TIM11 Peripherals Debug mode
*/
#if defined (DBGMCU_APB2_FZ_DBG_TIM11_STOP)
#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP)
#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP)
#endif
/**
* @}
*/
/**
* @}
*/
/** @defgroup SYSCFG_Macros SYSCFG: SYStem ConFiG
* @{
*/
/** @defgroup SYSCFG_VrefInt VREFINT configuration
* @{
*/
/**
* @brief Enables or disables the output of internal reference voltage
* (VrefInt) on I/O pin.
* @note The VrefInt output can be routed to any I/O in group 3:
* - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1).
* - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2).
* - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2),
* CH1b (PF11) or CH2b (PF12).
* Note: Comparator peripheral clock must be preliminarily enabled,
* either in COMP user function "HAL_COMP_MspInit()" (should be
* done if comparators are used) or by direct clock enable:
* Refer to macro "__HAL_RCC_COMP_CLK_ENABLE()".
* Note: In addition with this macro, VrefInt output buffer must be
* connected to the selected I/O pin. Refer to macro
* "__HAL_RI_IOSWITCH_CLOSE()".
* @note VrefInt output enable: Internal reference voltage connected to I/O group 3
* VrefInt output disable: Internal reference voltage disconnected from I/O group 3
* @retval None
*/
#define __HAL_SYSCFG_VREFINT_OUT_ENABLE() SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN)
#define __HAL_SYSCFG_VREFINT_OUT_DISABLE() CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN)
/**
* @}
*/
/** @defgroup SYSCFG_BootModeConfig Boot Mode Configuration
* @{
*/
/**
* @brief Main Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE)
/** @brief System Flash memory mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0)
/** @brief Embedded SRAM mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1)
#if defined(FSMC_R_BASE)
/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
*/
#define __HAL_SYSCFG_REMAPMEMORY_FSMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1)
#endif /* FSMC_R_BASE */
/**
* @brief Returns the boot mode as configured by user.
* @retval The boot mode as configured by user. The returned value can be one
* of the following values:
* @arg SYSCFG_BOOT_MAINFLASH
* @arg SYSCFG_BOOT_SYSTEMFLASH
* @arg SYSCFG_BOOT_FSMC (available only for STM32L151xD, STM32L152xD & STM32L162xD)
* @arg SYSCFG_BOOT_SRAM
*/
#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE)
/**
* @}
*/
/** @defgroup SYSCFG_USBConfig USB DP line Configuration
* @{
*/
/**
* @brief Control the internal pull-up on USB DP line.
*/
#define __HAL_SYSCFG_USBPULLUP_ENABLE() SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU)
#define __HAL_SYSCFG_USBPULLUP_DISABLE() CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU)
/**
* @}
*/
/**
* @}
*/
/** @defgroup RI_Macris RI: Routing Interface
* @{
*/
/** @defgroup RI_InputCaputureConfig Input Capture configuration
* @{
*/
/**
* @brief Configures the routing interface to map Input Capture 1 of TIMx to a selected I/O pin.
* @param __TIMSELECT__ Timer select.
* This parameter can be one of the following values:
* @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled.
* @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed.
* @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed.
* @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed.
* @param __INPUT__ selects which pin to be routed to Input Capture.
* This parameter must be a value of @ref RI_InputCaptureRouting
* e.g.
* __HAL_RI_REMAP_INPUTCAPTURE1(TIM_SELECT_TIM2, RI_INPUTCAPTUREROUTING_1)
* allows routing of Input capture IC1 of TIM2 to PA4.
* For details about correspondence between RI_INPUTCAPTUREROUTING_x
* and I/O pins refer to the parameters' description in the header file
* or refer to the product reference manual.
* @note Input capture selection bits are not reset by this function.
* To reset input capture selection bits, use SYSCFG_RIDeInit() function.
* @note The I/O should be configured in alternate function mode (AF14) using
* GPIO_PinAFConfig() function.
* @retval None.
*/
#define __HAL_RI_REMAP_INPUTCAPTURE1(__TIMSELECT__, __INPUT__) \
do {assert_param(IS_RI_TIM(__TIMSELECT__)); \
assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \
MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \
SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC1); \
MODIFY_REG(RI->ICR, RI_ICR_IC1OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC1OS)); \
}while(0)
/**
* @brief Configures the routing interface to map Input Capture 2 of TIMx to a selected I/O pin.
* @param __TIMSELECT__ Timer select.
* This parameter can be one of the following values:
* @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled.
* @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed.
* @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed.
* @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed.
* @param __INPUT__ selects which pin to be routed to Input Capture.
* This parameter must be a value of @ref RI_InputCaptureRouting
* @retval None.
*/
#define __HAL_RI_REMAP_INPUTCAPTURE2(__TIMSELECT__, __INPUT__) \
do {assert_param(IS_RI_TIM(__TIMSELECT__)); \
assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \
MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \
SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC2); \
MODIFY_REG(RI->ICR, RI_ICR_IC2OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC2OS)); \
}while(0)
/**
* @brief Configures the routing interface to map Input Capture 3 of TIMx to a selected I/O pin.
* @param __TIMSELECT__ Timer select.
* This parameter can be one of the following values:
* @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled.
* @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed.
* @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed.
* @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed.
* @param __INPUT__ selects which pin to be routed to Input Capture.
* This parameter must be a value of @ref RI_InputCaptureRouting
* @retval None.
*/
#define __HAL_RI_REMAP_INPUTCAPTURE3(__TIMSELECT__, __INPUT__) \
do {assert_param(IS_RI_TIM(__TIMSELECT__)); \
assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \
MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \
SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC3); \
MODIFY_REG(RI->ICR, RI_ICR_IC3OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC3OS)); \
}while(0)
/**
* @brief Configures the routing interface to map Input Capture 4 of TIMx to a selected I/O pin.
* @param __TIMSELECT__ Timer select.
* This parameter can be one of the following values:
* @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled.
* @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed.
* @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed.
* @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed.
* @param __INPUT__ selects which pin to be routed to Input Capture.
* This parameter must be a value of @ref RI_InputCaptureRouting
* @retval None.
*/
#define __HAL_RI_REMAP_INPUTCAPTURE4(__TIMSELECT__, __INPUT__) \
do {assert_param(IS_RI_TIM(__TIMSELECT__)); \
assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \
MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \
SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC4); \
MODIFY_REG(RI->ICR, RI_ICR_IC4OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC4OS)); \
}while(0)
/**
* @}
*/
/** @defgroup RI_SwitchControlConfig Switch Control configuration
* @{
*/
/**
* @brief Enable or disable the switch control mode.
* @note ENABLE: ADC analog switches closed if the corresponding
* I/O switch is also closed.
* When using COMP1, switch control mode must be enabled.
* @note DISABLE: ADC analog switches open or controlled by the ADC interface.
* When using the ADC for acquisition, switch control mode
* must be disabled.
* @note COMP1 comparator and ADC cannot be used at the same time since
* they share the ADC switch matrix.
* @retval None
*/
#define __HAL_RI_SWITCHCONTROLMODE_ENABLE() SET_BIT(RI->ASCR1, RI_ASCR1_SCM)
#define __HAL_RI_SWITCHCONTROLMODE_DISABLE() CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM)
/*
* @brief Close or Open the routing interface Input Output switches.
* @param __IOSWITCH__ selects the I/O analog switch number.
* This parameter must be a value of @ref RI_IOSwitch
* @retval None
*/
#define __HAL_RI_IOSWITCH_CLOSE(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \
if ((__IOSWITCH__) >> 31 != 0 ) \
{ \
SET_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \
} \
else \
{ \
SET_BIT(RI->ASCR2, (__IOSWITCH__)); \
} \
}while(0)
#define __HAL_RI_IOSWITCH_OPEN(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \
if ((__IOSWITCH__) >> 31 != 0 ) \
{ \
CLEAR_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \
} \
else \
{ \
CLEAR_BIT(RI->ASCR2, (__IOSWITCH__)); \
} \
}while(0)
#if defined (COMP_CSR_SW1)
/**
* @brief Close or open the internal switch COMP1_SW1.
* This switch connects I/O pin PC3 (can be used as ADC channel 13)
* and OPAMP3 output to ADC switch matrix (ADC channel VCOMP, channel
* 26) and COMP1 non-inverting input.
* Pin PC3 connection depends on another switch setting, refer to
* macro "__HAL_ADC_CHANNEL_SPEED_FAST()".
* @retval None.
*/
#define __HAL_RI_SWITCH_COMP1_SW1_CLOSE() SET_BIT(COMP->CSR, COMP_CSR_SW1)
#define __HAL_RI_SWITCH_COMP1_SW1_OPEN() CLEAR_BIT(COMP->CSR, COMP_CSR_SW1)
#endif /* COMP_CSR_SW1 */
/**
* @}
*/
/** @defgroup RI_HystConfig Hysteresis Activation and Deactivation
* @{
*/
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports A
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTA_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR1, (__IOPIN__)); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTA_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR1, (__IOPIN__)); \
} while(0)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports B
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTB_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTB_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \
} while(0)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports C
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTC_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR2, (__IOPIN__)); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTC_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR2, (__IOPIN__)); \
} while(0)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports D
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTD_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTD_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \
} while(0)
#if defined (GPIOE_BASE)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports E
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTE_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR3, (__IOPIN__)); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTE_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR3, (__IOPIN__)); \
} while(0)
#endif /* GPIOE_BASE */
#if defined(GPIOF_BASE) || defined(GPIOG_BASE)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports F
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTF_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTF_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \
} while(0)
/**
* @brief Enable or disable Hysteresis of the input schmitt trigger of Ports G
* When the I/Os are programmed in input mode by standard I/O port
* registers, the Schmitt trigger and the hysteresis are enabled by default.
* When hysteresis is disabled, it is possible to read the
* corresponding port with a trigger level of VDDIO/2.
* @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis.
* This parameter must be a value of @ref RI_Pin
* @retval None
*/
#define __HAL_RI_HYSTERIS_PORTG_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
CLEAR_BIT(RI->HYSCR4, (__IOPIN__)); \
} while(0)
#define __HAL_RI_HYSTERIS_PORTG_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \
SET_BIT(RI->HYSCR4, (__IOPIN__)); \
} while(0)
#endif /* GPIOF_BASE || GPIOG_BASE */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported variables --------------------------------------------------------*/
/** @defgroup HAL_Exported_Variables HAL Exported Variables
* @{
*/
extern __IO uint32_t uwTick;
extern uint32_t uwTickPrio;
extern uint32_t uwTickFreq;
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup HAL_Exported_Functions
* @{
*/
/** @addtogroup HAL_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ******************************/
HAL_StatusTypeDef HAL_Init(void);
HAL_StatusTypeDef HAL_DeInit(void);
void HAL_MspInit(void);
void HAL_MspDeInit(void);
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group2
* @{
*/
/* Peripheral Control functions ************************************************/
void HAL_IncTick(void);
void HAL_Delay(uint32_t Delay);
uint32_t HAL_GetTick(void);
uint32_t HAL_GetTickPrio(void);
HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq);
uint32_t HAL_GetTickFreq(void);
void HAL_SuspendTick(void);
void HAL_ResumeTick(void);
uint32_t HAL_GetHalVersion(void);
uint32_t HAL_GetREVID(void);
uint32_t HAL_GetDEVID(void);
uint32_t HAL_GetUIDw0(void);
uint32_t HAL_GetUIDw1(void);
uint32_t HAL_GetUIDw2(void);
/**
* @}
*/
/** @addtogroup HAL_Exported_Functions_Group3
* @{
*/
/* DBGMCU Peripheral Control functions *****************************************/
void HAL_DBGMCU_EnableDBGSleepMode(void);
void HAL_DBGMCU_DisableDBGSleepMode(void);
void HAL_DBGMCU_EnableDBGStopMode(void);
void HAL_DBGMCU_DisableDBGStopMode(void);
void HAL_DBGMCU_EnableDBGStandbyMode(void);
void HAL_DBGMCU_DisableDBGStandbyMode(void);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L1xx_HAL_H */