| /** |
| ****************************************************************************** |
| * @file stm32l1xx_ll_bus.h |
| * @author MCD Application Team |
| * @brief Header file of BUS LL module. |
| |
| @verbatim |
| ##### RCC Limitations ##### |
| ============================================================================== |
| [..] |
| A delay between an RCC peripheral clock enable and the effective peripheral |
| enabling should be taken into account in order to manage the peripheral read/write |
| from/to registers. |
| (+) This delay depends on the peripheral mapping. |
| (++) AHB & APB peripherals, 1 dummy read is necessary |
| |
| [..] |
| Workarounds: |
| (#) For AHB & APB peripherals, a dummy read to the peripheral register has been |
| inserted in each LL_{BUS}_GRP{x}_EnableClock() function. |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright(c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L1xx_LL_BUS_H |
| #define __STM32L1xx_LL_BUS_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l1xx.h" |
| |
| /** @addtogroup STM32L1xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(RCC) |
| |
| /** @defgroup BUS_LL BUS |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Constants BUS Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN |
| #define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN |
| #define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN |
| #define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN |
| #if defined(GPIOE) |
| #define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN |
| #endif/*GPIOE*/ |
| #define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHBENR_GPIOHEN |
| #if defined(GPIOF) |
| #define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN |
| #endif/*GPIOF*/ |
| #if defined(GPIOG) |
| #define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHBENR_GPIOGEN |
| #endif/*GPIOG*/ |
| #define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBLPENR_SRAMLPEN |
| #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN |
| #define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN |
| #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN |
| #if defined(DMA2) |
| #define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN |
| #endif/*DMA2*/ |
| #if defined(AES) |
| #define LL_AHB1_GRP1_PERIPH_CRYP RCC_AHBENR_AESEN |
| #endif/*AES*/ |
| #if defined(FSMC_Bank1) |
| #define LL_AHB1_GRP1_PERIPH_FSMC RCC_AHBENR_FSMCEN |
| #endif/*FSMC_Bank1*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN |
| #define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN |
| #define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN |
| #if defined(TIM5) |
| #define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN |
| #endif /*TIM5*/ |
| #define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN |
| #define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN |
| #if defined(LCD) |
| #define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR_LCDEN |
| #endif /*LCD*/ |
| #define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN |
| #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN |
| #if defined(SPI3) |
| #define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN |
| #endif /*SPI3*/ |
| #define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN |
| #define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN |
| #if defined(UART4) |
| #define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN |
| #endif /*UART4*/ |
| #if defined(UART5) |
| #define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN |
| #endif /*UART5*/ |
| #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN |
| #define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN |
| #define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN |
| #define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN |
| #define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN |
| #define LL_APB1_GRP1_PERIPH_COMP RCC_APB1ENR_COMPEN |
| #if defined(OPAMP) |
| /* Note: Peripherals COMP and OPAMP share the same clock domain */ |
| #define LL_APB1_GRP1_PERIPH_OPAMP LL_APB1_GRP1_PERIPH_COMP |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN |
| #define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN |
| #define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN |
| #define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN |
| #define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN |
| #if defined(SDIO) |
| #define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN |
| #endif /*SDIO*/ |
| #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN |
| #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Functions BUS Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB1 peripherals clock. |
| * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOHEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR GPIOGEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR AESEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR FSMCEN LL_AHB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHBENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHBENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB1 peripheral clock is enabled or not |
| * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR AESEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR FSMCEN LL_AHB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHBENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock. |
| * @rmtoll AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOHEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR GPIOGEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR AESEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR FSMCEN LL_AHB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB1 peripherals reset. |
| * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR FLITFRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR DMA1RST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR DMA2RST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR AESRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR FSMCRST LL_AHB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHBRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB1 peripherals reset. |
| * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR FLITFRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR AESRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR FSMCRST LL_AHB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHBLPENR GPIOALPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIODLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOELPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR FLITFLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR SRAMLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR AESLPEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBLPENR FSMCLPEN LL_AHB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHBLPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHBLPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHBLPENR GPIOALPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIODLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOELPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR FLITFLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR SRAMLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR AESLPEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBLPENR FSMCLPEN LL_AHB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FSMC (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBLPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR COMPEN LL_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR COMPEN LL_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1ENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR COMPEN LL_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR LCDRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR COMPRST LL_APB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR LCDRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR COMPRST LL_APB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR LCDLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR USBLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1LPENR COMPLPEN LL_APB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR LCDLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR USBLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1LPENR COMPLPEN LL_APB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_COMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR ADC1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR ADC1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2LPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM9 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM10 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM11 |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SDIO (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2LPENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(RCC) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L1xx_LL_BUS_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |