| /** |
| ****************************************************************************** |
| * @file stm32l1xx_hal.h |
| * @author MCD Application Team |
| * @brief This file contains all the functions prototypes for the HAL |
| * module driver. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L1xx_HAL_H |
| #define __STM32L1xx_HAL_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l1xx_hal_conf.h" |
| |
| /** @addtogroup STM32L1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup HAL |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup HAL_Exported_Constants HAL Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup HAL_TICK_FREQ Tick Frequency |
| * @{ |
| */ |
| #define HAL_TICK_FREQ_10HZ 100U |
| #define HAL_TICK_FREQ_100HZ 10U |
| #define HAL_TICK_FREQ_1KHZ 1U |
| #define HAL_TICK_FREQ_DEFAULT HAL_TICK_FREQ_1KHZ |
| |
| #define IS_TICKFREQ(__FREQ__) (((__FREQ__) == HAL_TICK_FREQ_10HZ) || \ |
| ((__FREQ__) == HAL_TICK_FREQ_100HZ) || \ |
| ((__FREQ__) == HAL_TICK_FREQ_1KHZ)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup SYSCFG_Constants SYSCFG: SYStem ConFiG |
| * @{ |
| */ |
| |
| /** @defgroup SYSCFG_BootMode Boot Mode |
| * @{ |
| */ |
| |
| #define SYSCFG_BOOT_MAINFLASH (0x00000000U) |
| #define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_0) |
| #if defined(FSMC_R_BASE) |
| #define SYSCFG_BOOT_FSMC ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE_1) |
| #endif /* FSMC_R_BASE */ |
| #define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_MEMRMP_BOOT_MODE) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_Constants RI: Routing Interface |
| * @{ |
| */ |
| |
| /** @defgroup RI_InputCapture Input Capture |
| * @{ |
| */ |
| |
| #define RI_INPUTCAPTURE_IC1 RI_ICR_IC1 /*!< Input Capture 1 */ |
| #define RI_INPUTCAPTURE_IC2 RI_ICR_IC2 /*!< Input Capture 2 */ |
| #define RI_INPUTCAPTURE_IC3 RI_ICR_IC3 /*!< Input Capture 3 */ |
| #define RI_INPUTCAPTURE_IC4 RI_ICR_IC4 /*!< Input Capture 4 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Select TIM Select |
| * @{ |
| */ |
| |
| #define TIM_SELECT_NONE (0x00000000U) /*!< None selected */ |
| #define TIM_SELECT_TIM2 ((uint32_t)RI_ICR_TIM_0) /*!< Timer 2 selected */ |
| #define TIM_SELECT_TIM3 ((uint32_t)RI_ICR_TIM_1) /*!< Timer 3 selected */ |
| #define TIM_SELECT_TIM4 ((uint32_t)RI_ICR_TIM) /*!< Timer 4 selected */ |
| |
| #define IS_RI_TIM(__TIM__) (((__TIM__) == TIM_SELECT_NONE) || \ |
| ((__TIM__) == TIM_SELECT_TIM2) || \ |
| ((__TIM__) == TIM_SELECT_TIM3) || \ |
| ((__TIM__) == TIM_SELECT_TIM4)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_InputCaptureRouting Input Capture Routing |
| * @{ |
| */ |
| /* TIMx_IC1 TIMx_IC2 TIMx_IC3 TIMx_IC4 */ |
| #define RI_INPUTCAPTUREROUTING_0 (0x00000000U) /* PA0 PA1 PA2 PA3 */ |
| #define RI_INPUTCAPTUREROUTING_1 (0x00000001U) /* PA4 PA5 PA6 PA7 */ |
| #define RI_INPUTCAPTUREROUTING_2 (0x00000002U) /* PA8 PA9 PA10 PA11 */ |
| #define RI_INPUTCAPTUREROUTING_3 (0x00000003U) /* PA12 PA13 PA14 PA15 */ |
| #define RI_INPUTCAPTUREROUTING_4 (0x00000004U) /* PC0 PC1 PC2 PC3 */ |
| #define RI_INPUTCAPTUREROUTING_5 (0x00000005U) /* PC4 PC5 PC6 PC7 */ |
| #define RI_INPUTCAPTUREROUTING_6 (0x00000006U) /* PC8 PC9 PC10 PC11 */ |
| #define RI_INPUTCAPTUREROUTING_7 (0x00000007U) /* PC12 PC13 PC14 PC15 */ |
| #define RI_INPUTCAPTUREROUTING_8 (0x00000008U) /* PD0 PD1 PD2 PD3 */ |
| #define RI_INPUTCAPTUREROUTING_9 (0x00000009U) /* PD4 PD5 PD6 PD7 */ |
| #define RI_INPUTCAPTUREROUTING_10 (0x0000000AU) /* PD8 PD9 PD10 PD11 */ |
| #define RI_INPUTCAPTUREROUTING_11 (0x0000000BU) /* PD12 PD13 PD14 PD15 */ |
| #define RI_INPUTCAPTUREROUTING_12 (0x0000000CU) /* PE0 PE1 PE2 PE3 */ |
| #define RI_INPUTCAPTUREROUTING_13 (0x0000000DU) /* PE4 PE5 PE6 PE7 */ |
| #define RI_INPUTCAPTUREROUTING_14 (0x0000000EU) /* PE8 PE9 PE10 PE11 */ |
| #define RI_INPUTCAPTUREROUTING_15 (0x0000000FU) /* PE12 PE13 PE14 PE15 */ |
| |
| #define IS_RI_INPUTCAPTURE_ROUTING(__ROUTING__) (((__ROUTING__) == RI_INPUTCAPTUREROUTING_0) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_1) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_2) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_3) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_4) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_5) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_6) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_7) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_8) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_9) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_10) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_11) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_12) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_13) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_14) || \ |
| ((__ROUTING__) == RI_INPUTCAPTUREROUTING_15)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_IOSwitch IO Switch |
| * @{ |
| */ |
| #define RI_ASCR1_REGISTER (0x80000000U) |
| /* ASCR1 I/O switch: bit 31 is set to '1' to indicate that the mask is in ASCR1 register */ |
| #define RI_IOSWITCH_CH0 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_0) |
| #define RI_IOSWITCH_CH1 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_1) |
| #define RI_IOSWITCH_CH2 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_2) |
| #define RI_IOSWITCH_CH3 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_3) |
| #define RI_IOSWITCH_CH4 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_4) |
| #define RI_IOSWITCH_CH5 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_5) |
| #define RI_IOSWITCH_CH6 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_6) |
| #define RI_IOSWITCH_CH7 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_7) |
| #define RI_IOSWITCH_CH8 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_8) |
| #define RI_IOSWITCH_CH9 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_9) |
| #define RI_IOSWITCH_CH10 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_10) |
| #define RI_IOSWITCH_CH11 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_11) |
| #define RI_IOSWITCH_CH12 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_12) |
| #define RI_IOSWITCH_CH13 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_13) |
| #define RI_IOSWITCH_CH14 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_14) |
| #define RI_IOSWITCH_CH15 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_15) |
| #define RI_IOSWITCH_CH18 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_18) |
| #define RI_IOSWITCH_CH19 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_19) |
| #define RI_IOSWITCH_CH20 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_20) |
| #define RI_IOSWITCH_CH21 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_21) |
| #define RI_IOSWITCH_CH22 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_22) |
| #define RI_IOSWITCH_CH23 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_23) |
| #define RI_IOSWITCH_CH24 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_24) |
| #define RI_IOSWITCH_CH25 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_25) |
| #define RI_IOSWITCH_VCOMP ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_VCOMP) /* VCOMP (ADC channel 26) is an internal switch used to connect selected channel to COMP1 non inverting input */ |
| #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
| #define RI_IOSWITCH_CH27 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_27) |
| #define RI_IOSWITCH_CH28 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_28) |
| #define RI_IOSWITCH_CH29 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_29) |
| #define RI_IOSWITCH_CH30 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_30) |
| #define RI_IOSWITCH_CH31 ((uint32_t)RI_ASCR1_REGISTER | RI_ASCR1_CH_31) |
| #endif /* RI_ASCR2_CH1b */ |
| |
| /* ASCR2 IO switch: bit 31 is set to '0' to indicate that the mask is in ASCR2 register */ |
| #define RI_IOSWITCH_GR10_1 ((uint32_t)RI_ASCR2_GR10_1) |
| #define RI_IOSWITCH_GR10_2 ((uint32_t)RI_ASCR2_GR10_2) |
| #define RI_IOSWITCH_GR10_3 ((uint32_t)RI_ASCR2_GR10_3) |
| #define RI_IOSWITCH_GR10_4 ((uint32_t)RI_ASCR2_GR10_4) |
| #define RI_IOSWITCH_GR6_1 ((uint32_t)RI_ASCR2_GR6_1) |
| #define RI_IOSWITCH_GR6_2 ((uint32_t)RI_ASCR2_GR6_2) |
| #define RI_IOSWITCH_GR5_1 ((uint32_t)RI_ASCR2_GR5_1) |
| #define RI_IOSWITCH_GR5_2 ((uint32_t)RI_ASCR2_GR5_2) |
| #define RI_IOSWITCH_GR5_3 ((uint32_t)RI_ASCR2_GR5_3) |
| #define RI_IOSWITCH_GR4_1 ((uint32_t)RI_ASCR2_GR4_1) |
| #define RI_IOSWITCH_GR4_2 ((uint32_t)RI_ASCR2_GR4_2) |
| #define RI_IOSWITCH_GR4_3 ((uint32_t)RI_ASCR2_GR4_3) |
| #if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3, Cat.4 and Cat.5 */ |
| #define RI_IOSWITCH_CH0b ((uint32_t)RI_ASCR2_CH0b) |
| #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
| #define RI_IOSWITCH_CH1b ((uint32_t)RI_ASCR2_CH1b) |
| #define RI_IOSWITCH_CH2b ((uint32_t)RI_ASCR2_CH2b) |
| #define RI_IOSWITCH_CH3b ((uint32_t)RI_ASCR2_CH3b) |
| #define RI_IOSWITCH_CH6b ((uint32_t)RI_ASCR2_CH6b) |
| #define RI_IOSWITCH_CH7b ((uint32_t)RI_ASCR2_CH7b) |
| #define RI_IOSWITCH_CH8b ((uint32_t)RI_ASCR2_CH8b) |
| #define RI_IOSWITCH_CH9b ((uint32_t)RI_ASCR2_CH9b) |
| #define RI_IOSWITCH_CH10b ((uint32_t)RI_ASCR2_CH10b) |
| #define RI_IOSWITCH_CH11b ((uint32_t)RI_ASCR2_CH11b) |
| #define RI_IOSWITCH_CH12b ((uint32_t)RI_ASCR2_CH12b) |
| #endif /* RI_ASCR2_CH1b */ |
| #define RI_IOSWITCH_GR6_3 ((uint32_t)RI_ASCR2_GR6_3) |
| #define RI_IOSWITCH_GR6_4 ((uint32_t)RI_ASCR2_GR6_4) |
| #endif /* RI_ASCR2_CH0b */ |
| |
| |
| #if defined (RI_ASCR2_CH1b) /* STM32L1 devices category Cat.4 and Cat.5 */ |
| |
| #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_CH27) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH28) || ((__IOSWITCH__) == RI_IOSWITCH_CH29) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH30) || ((__IOSWITCH__) == RI_IOSWITCH_CH31) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR6_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_4) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH0b) || ((__IOSWITCH__) == RI_IOSWITCH_CH1b) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH2b) || ((__IOSWITCH__) == RI_IOSWITCH_CH3b) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH6b) || ((__IOSWITCH__) == RI_IOSWITCH_CH7b) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH8b) || ((__IOSWITCH__) == RI_IOSWITCH_CH9b) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH10b) || ((__IOSWITCH__) == RI_IOSWITCH_CH11b) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH12b)) |
| |
| #else /* !RI_ASCR2_CH1b */ |
| |
| #if defined (RI_ASCR2_CH0b) /* STM32L1 devices category Cat.3 */ |
| |
| #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR4_3) || ((__IOSWITCH__) == RI_IOSWITCH_CH0b)) |
| |
| #else /* !RI_ASCR2_CH0b */ /* STM32L1 devices category Cat.1 and Cat.2 */ |
| |
| #define IS_RI_IOSWITCH(__IOSWITCH__) (((__IOSWITCH__) == RI_IOSWITCH_CH0) || ((__IOSWITCH__) == RI_IOSWITCH_CH1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH2) || ((__IOSWITCH__) == RI_IOSWITCH_CH3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH4) || ((__IOSWITCH__) == RI_IOSWITCH_CH5) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH6) || ((__IOSWITCH__) == RI_IOSWITCH_CH7) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH8) || ((__IOSWITCH__) == RI_IOSWITCH_CH9) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH10) || ((__IOSWITCH__) == RI_IOSWITCH_CH11) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH12) || ((__IOSWITCH__) == RI_IOSWITCH_CH13) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH14) || ((__IOSWITCH__) == RI_IOSWITCH_CH15) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH18) || ((__IOSWITCH__) == RI_IOSWITCH_CH19) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH20) || ((__IOSWITCH__) == RI_IOSWITCH_CH21) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH22) || ((__IOSWITCH__) == RI_IOSWITCH_CH23) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_CH24) || ((__IOSWITCH__) == RI_IOSWITCH_CH25) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_VCOMP) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR10_3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR10_4) || ((__IOSWITCH__) == RI_IOSWITCH_GR6_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR6_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_1) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR5_2) || ((__IOSWITCH__) == RI_IOSWITCH_GR5_3) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR4_1) || ((__IOSWITCH__) == RI_IOSWITCH_GR4_2) || \ |
| ((__IOSWITCH__) == RI_IOSWITCH_GR4_3)) |
| |
| #endif /* RI_ASCR2_CH0b */ |
| #endif /* RI_ASCR2_CH1b */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_Pin PIN define |
| * @{ |
| */ |
| #define RI_PIN_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ |
| #define RI_PIN_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ |
| #define RI_PIN_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ |
| #define RI_PIN_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ |
| #define RI_PIN_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ |
| #define RI_PIN_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ |
| #define RI_PIN_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ |
| #define RI_PIN_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ |
| #define RI_PIN_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ |
| #define RI_PIN_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ |
| #define RI_PIN_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ |
| #define RI_PIN_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ |
| #define RI_PIN_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ |
| #define RI_PIN_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ |
| #define RI_PIN_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ |
| #define RI_PIN_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ |
| #define RI_PIN_ALL ((uint16_t)0xFFFF) /*!< All pins selected */ |
| |
| #define IS_RI_PIN(__PIN__) ((__PIN__) != (uint16_t)0x00) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| |
| /** @defgroup HAL_Exported_Macros HAL Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup DBGMCU_Macros DBGMCU: Debug MCU |
| * @{ |
| */ |
| |
| /** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode |
| * @brief Freeze/Unfreeze Peripherals in Debug mode |
| * @{ |
| */ |
| |
| /** |
| * @brief TIM2 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM2_STOP) |
| #endif |
| |
| /** |
| * @brief TIM3 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM3_STOP) |
| #endif |
| |
| /** |
| * @brief TIM4 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM4_STOP) |
| #endif |
| |
| /** |
| * @brief TIM5 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM5_STOP) |
| #endif |
| |
| /** |
| * @brief TIM6 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) |
| #endif |
| |
| /** |
| * @brief TIM7 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) |
| #endif |
| |
| /** |
| * @brief RTC Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP) |
| #define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) |
| #endif |
| |
| /** |
| * @brief WWDG Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
| #define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) |
| #endif |
| |
| /** |
| * @brief IWDG Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
| #define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) |
| #endif |
| |
| /** |
| * @brief I2C1 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
| #define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
| #define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT) |
| #endif |
| |
| /** |
| * @brief I2C2 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
| #define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
| #define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT) |
| #endif |
| |
| /** |
| * @brief TIM9 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM9_STOP) |
| #endif |
| |
| /** |
| * @brief TIM10 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM10_STOP) |
| #endif |
| |
| /** |
| * @brief TIM11 Peripherals Debug mode |
| */ |
| #if defined (DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
| #define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
| #define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM11_STOP) |
| #endif |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSCFG_Macros SYSCFG: SYStem ConFiG |
| * @{ |
| */ |
| |
| /** @defgroup SYSCFG_VrefInt VREFINT configuration |
| * @{ |
| */ |
| |
| /** |
| * @brief Enables or disables the output of internal reference voltage |
| * (VrefInt) on I/O pin. |
| * @note The VrefInt output can be routed to any I/O in group 3: |
| * - For Cat.1 and Cat.2 devices: CH8 (PB0) or CH9 (PB1). |
| * - For Cat.3 devices: CH8 (PB0), CH9 (PB1) or CH0b (PB2). |
| * - For Cat.4 and Cat.5 devices: CH8 (PB0), CH9 (PB1), CH0b (PB2), |
| * CH1b (PF11) or CH2b (PF12). |
| * Note: Comparator peripheral clock must be preliminarily enabled, |
| * either in COMP user function "HAL_COMP_MspInit()" (should be |
| * done if comparators are used) or by direct clock enable: |
| * Refer to macro "__HAL_RCC_COMP_CLK_ENABLE()". |
| * Note: In addition with this macro, VrefInt output buffer must be |
| * connected to the selected I/O pin. Refer to macro |
| * "__HAL_RI_IOSWITCH_CLOSE()". |
| * @note VrefInt output enable: Internal reference voltage connected to I/O group 3 |
| * VrefInt output disable: Internal reference voltage disconnected from I/O group 3 |
| * @retval None |
| */ |
| #define __HAL_SYSCFG_VREFINT_OUT_ENABLE() SET_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) |
| #define __HAL_SYSCFG_VREFINT_OUT_DISABLE() CLEAR_BIT(COMP->CSR, COMP_CSR_VREFOUTEN) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSCFG_BootModeConfig Boot Mode Configuration |
| * @{ |
| */ |
| |
| /** |
| * @brief Main Flash memory mapped at 0x00000000 |
| */ |
| #define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE) |
| |
| /** @brief System Flash memory mapped at 0x00000000 |
| */ |
| #define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0) |
| |
| /** @brief Embedded SRAM mapped at 0x00000000 |
| */ |
| #define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1) |
| |
| #if defined(FSMC_R_BASE) |
| /** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 |
| */ |
| #define __HAL_SYSCFG_REMAPMEMORY_FSMC() MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, SYSCFG_MEMRMP_MEM_MODE_1) |
| |
| #endif /* FSMC_R_BASE */ |
| |
| /** |
| * @brief Returns the boot mode as configured by user. |
| * @retval The boot mode as configured by user. The returned value can be one |
| * of the following values: |
| * @arg SYSCFG_BOOT_MAINFLASH |
| * @arg SYSCFG_BOOT_SYSTEMFLASH |
| * @arg SYSCFG_BOOT_FSMC (available only for STM32L151xD, STM32L152xD & STM32L162xD) |
| * @arg SYSCFG_BOOT_SRAM |
| */ |
| #define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_BOOT_MODE) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSCFG_USBConfig USB DP line Configuration |
| * @{ |
| */ |
| |
| /** |
| * @brief Control the internal pull-up on USB DP line. |
| */ |
| #define __HAL_SYSCFG_USBPULLUP_ENABLE() SET_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) |
| |
| #define __HAL_SYSCFG_USBPULLUP_DISABLE() CLEAR_BIT(SYSCFG->PMC, SYSCFG_PMC_USB_PU) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_Macris RI: Routing Interface |
| * @{ |
| */ |
| |
| /** @defgroup RI_InputCaputureConfig Input Capture configuration |
| * @{ |
| */ |
| |
| /** |
| * @brief Configures the routing interface to map Input Capture 1 of TIMx to a selected I/O pin. |
| * @param __TIMSELECT__ Timer select. |
| * This parameter can be one of the following values: |
| * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
| * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
| * @param __INPUT__ selects which pin to be routed to Input Capture. |
| * This parameter must be a value of @ref RI_InputCaptureRouting |
| * e.g. |
| * __HAL_RI_REMAP_INPUTCAPTURE1(TIM_SELECT_TIM2, RI_INPUTCAPTUREROUTING_1) |
| * allows routing of Input capture IC1 of TIM2 to PA4. |
| * For details about correspondence between RI_INPUTCAPTUREROUTING_x |
| * and I/O pins refer to the parameters' description in the header file |
| * or refer to the product reference manual. |
| * @note Input capture selection bits are not reset by this function. |
| * To reset input capture selection bits, use SYSCFG_RIDeInit() function. |
| * @note The I/O should be configured in alternate function mode (AF14) using |
| * GPIO_PinAFConfig() function. |
| * @retval None. |
| */ |
| #define __HAL_RI_REMAP_INPUTCAPTURE1(__TIMSELECT__, __INPUT__) \ |
| do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
| assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
| MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
| SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC1); \ |
| MODIFY_REG(RI->ICR, RI_ICR_IC1OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC1OS)); \ |
| }while(0) |
| |
| /** |
| * @brief Configures the routing interface to map Input Capture 2 of TIMx to a selected I/O pin. |
| * @param __TIMSELECT__ Timer select. |
| * This parameter can be one of the following values: |
| * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
| * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
| * @param __INPUT__ selects which pin to be routed to Input Capture. |
| * This parameter must be a value of @ref RI_InputCaptureRouting |
| * @retval None. |
| */ |
| #define __HAL_RI_REMAP_INPUTCAPTURE2(__TIMSELECT__, __INPUT__) \ |
| do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
| assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
| MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
| SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC2); \ |
| MODIFY_REG(RI->ICR, RI_ICR_IC2OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC2OS)); \ |
| }while(0) |
| |
| /** |
| * @brief Configures the routing interface to map Input Capture 3 of TIMx to a selected I/O pin. |
| * @param __TIMSELECT__ Timer select. |
| * This parameter can be one of the following values: |
| * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
| * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
| * @param __INPUT__ selects which pin to be routed to Input Capture. |
| * This parameter must be a value of @ref RI_InputCaptureRouting |
| * @retval None. |
| */ |
| #define __HAL_RI_REMAP_INPUTCAPTURE3(__TIMSELECT__, __INPUT__) \ |
| do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
| assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
| MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
| SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC3); \ |
| MODIFY_REG(RI->ICR, RI_ICR_IC3OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC3OS)); \ |
| }while(0) |
| |
| /** |
| * @brief Configures the routing interface to map Input Capture 4 of TIMx to a selected I/O pin. |
| * @param __TIMSELECT__ Timer select. |
| * This parameter can be one of the following values: |
| * @arg TIM_SELECT_NONE: No timer selected and default Timer mapping is enabled. |
| * @arg TIM_SELECT_TIM2: Timer 2 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM3: Timer 3 Input Captures to be routed. |
| * @arg TIM_SELECT_TIM4: Timer 4 Input Captures to be routed. |
| * @param __INPUT__ selects which pin to be routed to Input Capture. |
| * This parameter must be a value of @ref RI_InputCaptureRouting |
| * @retval None. |
| */ |
| #define __HAL_RI_REMAP_INPUTCAPTURE4(__TIMSELECT__, __INPUT__) \ |
| do {assert_param(IS_RI_TIM(__TIMSELECT__)); \ |
| assert_param(IS_RI_INPUTCAPTURE_ROUTING(__INPUT__)); \ |
| MODIFY_REG(RI->ICR, RI_ICR_TIM, (__TIMSELECT__)); \ |
| SET_BIT(RI->ICR, RI_INPUTCAPTURE_IC4); \ |
| MODIFY_REG(RI->ICR, RI_ICR_IC4OS, (__INPUT__) << POSITION_VAL(RI_ICR_IC4OS)); \ |
| }while(0) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_SwitchControlConfig Switch Control configuration |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable or disable the switch control mode. |
| * @note ENABLE: ADC analog switches closed if the corresponding |
| * I/O switch is also closed. |
| * When using COMP1, switch control mode must be enabled. |
| * @note DISABLE: ADC analog switches open or controlled by the ADC interface. |
| * When using the ADC for acquisition, switch control mode |
| * must be disabled. |
| * @note COMP1 comparator and ADC cannot be used at the same time since |
| * they share the ADC switch matrix. |
| * @retval None |
| */ |
| #define __HAL_RI_SWITCHCONTROLMODE_ENABLE() SET_BIT(RI->ASCR1, RI_ASCR1_SCM) |
| |
| #define __HAL_RI_SWITCHCONTROLMODE_DISABLE() CLEAR_BIT(RI->ASCR1, RI_ASCR1_SCM) |
| |
| /* |
| * @brief Close or Open the routing interface Input Output switches. |
| * @param __IOSWITCH__ selects the I/O analog switch number. |
| * This parameter must be a value of @ref RI_IOSwitch |
| * @retval None |
| */ |
| #define __HAL_RI_IOSWITCH_CLOSE(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ |
| if ((__IOSWITCH__) >> 31 != 0 ) \ |
| { \ |
| SET_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ |
| } \ |
| else \ |
| { \ |
| SET_BIT(RI->ASCR2, (__IOSWITCH__)); \ |
| } \ |
| }while(0) |
| |
| #define __HAL_RI_IOSWITCH_OPEN(__IOSWITCH__) do { assert_param(IS_RI_IOSWITCH(__IOSWITCH__)); \ |
| if ((__IOSWITCH__) >> 31 != 0 ) \ |
| { \ |
| CLEAR_BIT(RI->ASCR1, (__IOSWITCH__) & 0x7FFFFFFF); \ |
| } \ |
| else \ |
| { \ |
| CLEAR_BIT(RI->ASCR2, (__IOSWITCH__)); \ |
| } \ |
| }while(0) |
| |
| #if defined (COMP_CSR_SW1) |
| /** |
| * @brief Close or open the internal switch COMP1_SW1. |
| * This switch connects I/O pin PC3 (can be used as ADC channel 13) |
| * and OPAMP3 output to ADC switch matrix (ADC channel VCOMP, channel |
| * 26) and COMP1 non-inverting input. |
| * Pin PC3 connection depends on another switch setting, refer to |
| * macro "__HAL_ADC_CHANNEL_SPEED_FAST()". |
| * @retval None. |
| */ |
| #define __HAL_RI_SWITCH_COMP1_SW1_CLOSE() SET_BIT(COMP->CSR, COMP_CSR_SW1) |
| |
| #define __HAL_RI_SWITCH_COMP1_SW1_OPEN() CLEAR_BIT(COMP->CSR, COMP_CSR_SW1) |
| #endif /* COMP_CSR_SW1 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RI_HystConfig Hysteresis Activation and Deactivation |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports A |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTA_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR1, (__IOPIN__)); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTA_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR1, (__IOPIN__)); \ |
| } while(0) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports B |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTB_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTB_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR1, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports C |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTC_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR2, (__IOPIN__)); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTC_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR2, (__IOPIN__)); \ |
| } while(0) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports D |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTD_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTD_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR2, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| #if defined (GPIOE_BASE) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports E |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTE_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR3, (__IOPIN__)); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTE_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR3, (__IOPIN__)); \ |
| } while(0) |
| |
| #endif /* GPIOE_BASE */ |
| |
| #if defined(GPIOF_BASE) || defined(GPIOG_BASE) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports F |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTF_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTF_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR3, (__IOPIN__) << 16 ); \ |
| } while(0) |
| |
| /** |
| * @brief Enable or disable Hysteresis of the input schmitt trigger of Ports G |
| * When the I/Os are programmed in input mode by standard I/O port |
| * registers, the Schmitt trigger and the hysteresis are enabled by default. |
| * When hysteresis is disabled, it is possible to read the |
| * corresponding port with a trigger level of VDDIO/2. |
| * @param __IOPIN__ : Selects the pin(s) on which to enable or disable hysteresis. |
| * This parameter must be a value of @ref RI_Pin |
| * @retval None |
| */ |
| #define __HAL_RI_HYSTERIS_PORTG_ON(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| CLEAR_BIT(RI->HYSCR4, (__IOPIN__)); \ |
| } while(0) |
| |
| #define __HAL_RI_HYSTERIS_PORTG_OFF(__IOPIN__) do {assert_param(IS_RI_PIN(__IOPIN__)); \ |
| SET_BIT(RI->HYSCR4, (__IOPIN__)); \ |
| } while(0) |
| |
| #endif /* GPIOF_BASE || GPIOG_BASE */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported variables --------------------------------------------------------*/ |
| /** @defgroup HAL_Exported_Variables HAL Exported Variables |
| * @{ |
| */ |
| extern __IO uint32_t uwTick; |
| extern uint32_t uwTickPrio; |
| extern uint32_t uwTickFreq; |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup HAL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup HAL_Exported_Functions_Group1 |
| * @{ |
| */ |
| |
| /* Initialization and de-initialization functions ******************************/ |
| HAL_StatusTypeDef HAL_Init(void); |
| HAL_StatusTypeDef HAL_DeInit(void); |
| void HAL_MspInit(void); |
| void HAL_MspDeInit(void); |
| HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup HAL_Exported_Functions_Group2 |
| * @{ |
| */ |
| |
| /* Peripheral Control functions ************************************************/ |
| void HAL_IncTick(void); |
| void HAL_Delay(uint32_t Delay); |
| uint32_t HAL_GetTick(void); |
| uint32_t HAL_GetTickPrio(void); |
| HAL_StatusTypeDef HAL_SetTickFreq(uint32_t Freq); |
| uint32_t HAL_GetTickFreq(void); |
| void HAL_SuspendTick(void); |
| void HAL_ResumeTick(void); |
| uint32_t HAL_GetHalVersion(void); |
| uint32_t HAL_GetREVID(void); |
| uint32_t HAL_GetDEVID(void); |
| uint32_t HAL_GetUIDw0(void); |
| uint32_t HAL_GetUIDw1(void); |
| uint32_t HAL_GetUIDw2(void); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup HAL_Exported_Functions_Group3 |
| * @{ |
| */ |
| |
| /* DBGMCU Peripheral Control functions *****************************************/ |
| void HAL_DBGMCU_EnableDBGSleepMode(void); |
| void HAL_DBGMCU_DisableDBGSleepMode(void); |
| void HAL_DBGMCU_EnableDBGStopMode(void); |
| void HAL_DBGMCU_DisableDBGStopMode(void); |
| void HAL_DBGMCU_EnableDBGStandbyMode(void); |
| void HAL_DBGMCU_DisableDBGStandbyMode(void); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L1xx_HAL_H */ |
| |
| |
