| /** |
| ****************************************************************************** |
| * @file stm32l1xx_hal_pwr.c |
| * @author MCD Application Team |
| * @brief PWR HAL module driver. |
| * |
| * This file provides firmware functions to manage the following |
| * functionalities of the Power Controller (PWR) peripheral: |
| * + Initialization/de-initialization functions |
| * + Peripheral Control functions |
| * |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l1xx_hal.h" |
| |
| /** @addtogroup STM32L1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup PWR PWR |
| * @brief PWR HAL module driver |
| * @{ |
| */ |
| |
| #ifdef HAL_PWR_MODULE_ENABLED |
| |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| #define PVD_MODE_IT (0x00010000U) |
| #define PVD_MODE_EVT (0x00020000U) |
| #define PVD_RISING_EDGE (0x00000001U) |
| #define PVD_FALLING_EDGE (0x00000002U) |
| |
| /* Private macro -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private function prototypes -----------------------------------------------*/ |
| /* Private functions ---------------------------------------------------------*/ |
| |
| /** @defgroup PWR_Exported_Functions PWR Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @brief Initialization and de-initialization functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### Initialization and de-initialization functions ##### |
| =============================================================================== |
| [..] |
| After reset, the backup domain (RTC registers, RTC backup data |
| registers) is protected against possible unwanted |
| write accesses. |
| To enable access to the RTC Domain and RTC registers, proceed as follows: |
| (+) Enable the Power Controller (PWR) APB1 interface clock using the |
| __HAL_RCC_PWR_CLK_ENABLE() macro. |
| (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Deinitializes the PWR peripheral registers to their default reset values. |
| * @note Before calling this function, the VOS[1:0] bits should be configured |
| * to "10" and the system frequency has to be configured accordingly. |
| * To configure the VOS[1:0] bits, use the PWR_VoltageScalingConfig() |
| * function. |
| * @note ULP and FWU bits are not reset by this function. |
| * @retval None |
| */ |
| void HAL_PWR_DeInit(void) |
| { |
| __HAL_RCC_PWR_FORCE_RESET(); |
| __HAL_RCC_PWR_RELEASE_RESET(); |
| } |
| |
| /** |
| * @brief Enables access to the backup domain (RTC registers, RTC |
| * backup data registers ). |
| * @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the |
| * Backup Domain Access should be kept enabled. |
| * @retval None |
| */ |
| void HAL_PWR_EnableBkUpAccess(void) |
| { |
| /* Enable access to RTC and backup registers */ |
| *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; |
| } |
| |
| /** |
| * @brief Disables access to the backup domain (RTC registers, RTC |
| * backup data registers). |
| * @note If the HSE divided by 2, 4, 8 or 16 is used as the RTC clock, the |
| * Backup Domain Access should be kept enabled. |
| * @retval None |
| */ |
| void HAL_PWR_DisableBkUpAccess(void) |
| { |
| /* Disable access to RTC and backup registers */ |
| *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions |
| * @brief Low Power modes configuration functions |
| * |
| @verbatim |
| |
| =============================================================================== |
| ##### Peripheral Control functions ##### |
| =============================================================================== |
| |
| *** PVD configuration *** |
| ========================= |
| [..] |
| (+) The PVD is used to monitor the VDD power supply by comparing it to a |
| threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). |
| (+) The PVD can use an external input analog voltage (PVD_IN) which is compared |
| internally to VREFINT. The PVD_IN (PB7) has to be configured in Analog mode |
| when PWR_PVDLevel_7 is selected (PLS[2:0] = 111). |
| |
| (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower |
| than the PVD threshold. This event is internally connected to the EXTI |
| line16 and can generate an interrupt if enabled. This is done through |
| __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. |
| (+) The PVD is stopped in Standby mode. |
| |
| *** WakeUp pin configuration *** |
| ================================ |
| [..] |
| (+) WakeUp pin is used to wake up the system from Standby mode. This pin is |
| forced in input pull-down configuration and is active on rising edges. |
| (+) There are two or three WakeUp pins: |
| WakeUp Pin 1 on PA.00. |
| WakeUp Pin 2 on PC.13. |
| WakeUp Pin 3 on PE.06. : Only on product with GPIOE available |
| |
| [..] |
| *** Main and Backup Regulators configuration *** |
| ================================================ |
| |
| (+) The main internal regulator can be configured to have a tradeoff between |
| performance and power consumption when the device does not operate at |
| the maximum frequency. This is done through __HAL_PWR_VOLTAGESCALING_CONFIG() |
| macro which configure VOS bit in PWR_CR register: |
| (++) When this bit is set (Regulator voltage output Scale 1 mode selected) |
| the System frequency can go up to 32 MHz. |
| (++) When this bit is reset (Regulator voltage output Scale 2 mode selected) |
| the System frequency can go up to 16 MHz. |
| (++) When this bit is reset (Regulator voltage output Scale 3 mode selected) |
| the System frequency can go up to 4.2 MHz. |
| |
| Refer to the datasheets for more details. |
| |
| *** Low Power modes configuration *** |
| ===================================== |
| [..] |
| The device features 5 low-power modes: |
| (+) Low power run mode: regulator in low power mode, limited clock frequency, |
| limited number of peripherals running. |
| (+) Sleep mode: Cortex-M3 core stopped, peripherals kept running. |
| (+) Low power sleep mode: Cortex-M3 core stopped, limited clock frequency, |
| limited number of peripherals running, regulator in low power mode. |
| (+) Stop mode: All clocks are stopped, regulator running, regulator in low power mode. |
| (+) Standby mode: VCORE domain powered off |
| |
| *** Low power run mode *** |
| ========================= |
| [..] |
| To further reduce the consumption when the system is in Run mode, the regulator can be |
| configured in low power mode. In this mode, the system frequency should not exceed |
| MSI frequency range1. |
| In Low power run mode, all I/O pins keep the same state as in Run mode. |
| |
| (+) Entry: |
| (++) VCORE in range2 |
| (++) Decrease the system frequency tonot exceed the frequency of MSI frequency range1. |
| (++) The regulator is forced in low power mode using the HAL_PWREx_EnableLowPowerRunMode() |
| function. |
| (+) Exit: |
| (++) The regulator is forced in Main regulator mode using the HAL_PWREx_DisableLowPowerRunMode() |
| function. |
| (++) Increase the system frequency if needed. |
| |
| *** Sleep mode *** |
| ================== |
| [..] |
| (+) Entry: |
| The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) |
| functions with |
| (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction |
| (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction |
| |
| (+) Exit: |
| (++) Any peripheral interrupt acknowledged by the nested vectored interrupt |
| controller (NVIC) can wake up the device from Sleep mode. |
| |
| *** Low power sleep mode *** |
| ============================ |
| [..] |
| (+) Entry: |
| The Low power sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_LOWPOWERREGULATOR_ON, PWR_SLEEPENTRY_WFx) |
| functions with |
| (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction |
| (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction |
| (+) The Flash memory can be switched off by using the control bits (SLEEP_PD in the FLASH_ACR register. |
| This reduces power consumption but increases the wake-up time. |
| |
| (+) Exit: |
| (++) If the WFI instruction was used to enter Low power sleep mode, any peripheral interrupt |
| acknowledged by the nested vectored interrupt controller (NVIC) can wake up the device |
| from Low power sleep mode. If the WFE instruction was used to enter Low power sleep mode, |
| the MCU exits Sleep mode as soon as an event occurs. |
| |
| *** Stop mode *** |
| ================= |
| [..] |
| The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral |
| clock gating. The voltage regulator can be configured either in normal or low-power mode. |
| In Stop mode, all clocks in the VCORE domain are stopped, the PLL, the MSI, the HSI and |
| the HSE RC oscillators are disabled. Internal SRAM and register contents are preserved. |
| To get the lowest consumption in Stop mode, the internal Flash memory also enters low |
| power mode. When the Flash memory is in power-down mode, an additional startup delay is |
| incurred when waking up from Stop mode. |
| To minimize the consumption In Stop mode, VREFINT, the BOR, PVD, and temperature |
| sensor can be switched off before entering Stop mode. They can be switched on again by |
| software after exiting Stop mode using the ULP bit in the PWR_CR register. |
| In Stop mode, all I/O pins keep the same state as in Run mode. |
| |
| (+) Entry: |
| The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI ) |
| function with: |
| (++) Main regulator ON. |
| (++) Low Power regulator ON. |
| (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction |
| (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction |
| (+) Exit: |
| (++) By issuing an interrupt or a wakeup event, the MSI RC oscillator is selected as system clock. |
| |
| *** Standby mode *** |
| ==================== |
| [..] |
| The Standby mode allows to achieve the lowest power consumption. It is based on the |
| Cortex-M3 deepsleep mode, with the voltage regulator disabled. The VCORE domain is |
| consequently powered off. The PLL, the MSI, the HSI oscillator and the HSE oscillator are |
| also switched off. SRAM and register contents are lost except for the RTC registers, RTC |
| backup registers and Standby circuitry. |
| |
| To minimize the consumption In Standby mode, VREFINT, the BOR, PVD, and temperature |
| sensor can be switched off before entering the Standby mode. They can be switched |
| on again by software after exiting the Standby mode. |
| function. |
| |
| (+) Entry: |
| (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. |
| (+) Exit: |
| (++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wakeup, |
| tamper event, time-stamp event, external reset in NRST pin, IWDG reset. |
| |
| *** Auto-wakeup (AWU) from low-power mode *** |
| ============================================= |
| [..] |
| The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC |
| Wakeup event, a tamper event, a time-stamp event, or a comparator event, |
| without depending on an external interrupt (Auto-wakeup mode). |
| |
| (+) RTC auto-wakeup (AWU) from the Stop mode |
| (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to: |
| (+++) Configure the EXTI Line 17 to be sensitive to rising edges (Interrupt |
| or Event modes) and Enable the RTC Alarm Interrupt using the HAL_RTC_SetAlarm_IT() |
| function |
| (+++) Configure the RTC to generate the RTC alarm using the HAL_RTC_Init() |
| and HAL_RTC_SetTime() functions. |
| (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it |
| is necessary to: |
| (+++) Configure the EXTI Line 19 to be sensitive to rising edges (Interrupt or Event modes) and |
| Enable the RTC Tamper or time stamp Interrupt using the HAL_RTCEx_SetTamper_IT() |
| or HAL_RTCEx_SetTimeStamp_IT() functions. |
| (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to: |
| (+++) Configure the EXTI Line 20 to be sensitive to rising edges (Interrupt or Event modes) and |
| Enable the RTC WakeUp Interrupt using the HAL_RTCEx_SetWakeUpTimer_IT() function. |
| (+++) Configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer() |
| function. |
| |
| (+) RTC auto-wakeup (AWU) from the Standby mode |
| (++) To wake up from the Standby mode with an RTC alarm event, it is necessary to: |
| (+++) Enable the RTC Alarm Interrupt using the HAL_RTC_SetAlarm_IT() function. |
| (+++) Configure the RTC to generate the RTC alarm using the HAL_RTC_Init() |
| and HAL_RTC_SetTime() functions. |
| (++) To wake up from the Standby mode with an RTC Tamper or time stamp event, it |
| is necessary to: |
| (+++) Enable the RTC Tamper or time stamp Interrupt and Configure the RTC to |
| detect the tamper or time stamp event using the HAL_RTCEx_SetTimeStamp_IT() |
| or HAL_RTCEx_SetTamper_IT()functions. |
| (++) To wake up from the Standby mode with an RTC WakeUp event, it is necessary to: |
| (+++) Enable the RTC WakeUp Interrupt and Configure the RTC to generate the RTC WakeUp event |
| using the HAL_RTCEx_SetWakeUpTimer_IT() and HAL_RTCEx_SetWakeUpTimer() functions. |
| |
| (+) Comparator auto-wakeup (AWU) from the Stop mode |
| (++) To wake up from the Stop mode with an comparator 1 or comparator 2 wakeup |
| event, it is necessary to: |
| (+++) Configure the EXTI Line 21 or EXTI Line 22 for comparator to be sensitive to to the |
| selected edges (falling, rising or falling and rising) (Interrupt or Event modes) using |
| the COMP functions. |
| (+++) Configure the comparator to generate the event. |
| |
| |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). |
| * @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration |
| * information for the PVD. |
| * @note Refer to the electrical characteristics of your device datasheet for |
| * more details about the voltage threshold corresponding to each |
| * detection level. |
| * @retval None |
| */ |
| void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) |
| { |
| /* Check the parameters */ |
| assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); |
| assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); |
| |
| /* Set PLS[7:5] bits according to PVDLevel value */ |
| MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); |
| |
| /* Clear any previous config. Keep it clear if no event or IT mode is selected */ |
| __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); |
| __HAL_PWR_PVD_EXTI_DISABLE_IT(); |
| __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE(); |
| |
| /* Configure interrupt mode */ |
| if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) |
| { |
| __HAL_PWR_PVD_EXTI_ENABLE_IT(); |
| } |
| |
| /* Configure event mode */ |
| if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) |
| { |
| __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); |
| } |
| |
| /* Configure the edge */ |
| if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) |
| { |
| __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); |
| } |
| |
| if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) |
| { |
| __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); |
| } |
| } |
| |
| /** |
| * @brief Enables the Power Voltage Detector(PVD). |
| * @retval None |
| */ |
| void HAL_PWR_EnablePVD(void) |
| { |
| /* Enable the power voltage detector */ |
| *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; |
| } |
| |
| /** |
| * @brief Disables the Power Voltage Detector(PVD). |
| * @retval None |
| */ |
| void HAL_PWR_DisablePVD(void) |
| { |
| /* Disable the power voltage detector */ |
| *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; |
| } |
| |
| /** |
| * @brief Enables the WakeUp PINx functionality. |
| * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable. |
| * This parameter can be one of the following values: |
| * @arg PWR_WAKEUP_PIN1 |
| * @arg PWR_WAKEUP_PIN2 |
| * @arg PWR_WAKEUP_PIN3: Only on product with GPIOE available |
| * @retval None |
| */ |
| void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) |
| { |
| /* Check the parameter */ |
| assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); |
| /* Enable the EWUPx pin */ |
| *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE; |
| } |
| |
| /** |
| * @brief Disables the WakeUp PINx functionality. |
| * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. |
| * This parameter can be one of the following values: |
| * @arg PWR_WAKEUP_PIN1 |
| * @arg PWR_WAKEUP_PIN2 |
| * @arg PWR_WAKEUP_PIN3: Only on product with GPIOE available |
| * @retval None |
| */ |
| void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) |
| { |
| /* Check the parameter */ |
| assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); |
| /* Disable the EWUPx pin */ |
| *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE; |
| } |
| |
| /** |
| * @brief Enters Sleep mode. |
| * @note In Sleep mode, all I/O pins keep the same state as in Run mode. |
| * @param Regulator: Specifies the regulator state in SLEEP mode. |
| * This parameter can be one of the following values: |
| * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON |
| * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON |
| * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction. |
| * When WFI entry is used, tick interrupt have to be disabled if not desired as |
| * the interrupt wake up source. |
| * This parameter can be one of the following values: |
| * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction |
| * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction |
| * @retval None |
| */ |
| void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) |
| { |
| /* Check the parameters */ |
| assert_param(IS_PWR_REGULATOR(Regulator)); |
| assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); |
| |
| /* Select the regulator state in Sleep mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ |
| MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), Regulator); |
| |
| /* Clear SLEEPDEEP bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| |
| /* Select SLEEP mode entry -------------------------------------------------*/ |
| if(SLEEPEntry == PWR_SLEEPENTRY_WFI) |
| { |
| /* Request Wait For Interrupt */ |
| __WFI(); |
| } |
| else |
| { |
| /* Request Wait For Event */ |
| __SEV(); |
| __WFE(); |
| __WFE(); |
| } |
| } |
| |
| /** |
| * @brief Enters Stop mode. |
| * @note In Stop mode, all I/O pins keep the same state as in Run mode. |
| * @note When exiting Stop mode by using an interrupt or a wakeup event, |
| * MSI RC oscillator is selected as system clock. |
| * @note When the voltage regulator operates in low power mode, an additional |
| * startup delay is incurred when waking up from Stop mode. |
| * By keeping the internal regulator ON during Stop mode, the consumption |
| * is higher although the startup time is reduced. |
| * @param Regulator: Specifies the regulator state in Stop mode. |
| * This parameter can be one of the following values: |
| * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON |
| * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON |
| * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction. |
| * This parameter can be one of the following values: |
| * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction |
| * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction |
| * @retval None |
| */ |
| void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) |
| { |
| /* Check the parameters */ |
| assert_param(IS_PWR_REGULATOR(Regulator)); |
| assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); |
| |
| /* Select the regulator state in Stop mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ |
| MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), Regulator); |
| |
| /* Set SLEEPDEEP bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| |
| /* Select Stop mode entry --------------------------------------------------*/ |
| if(STOPEntry == PWR_STOPENTRY_WFI) |
| { |
| /* Request Wait For Interrupt */ |
| __WFI(); |
| } |
| else |
| { |
| /* Request Wait For Event */ |
| __SEV(); |
| __WFE(); |
| __WFE(); |
| } |
| /* Reset SLEEPDEEP bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| } |
| |
| /** |
| * @brief Enters Standby mode. |
| * @note In Standby mode, all I/O pins are high impedance except for: |
| * - Reset pad (still available) |
| * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC |
| * Alarm out, or RTC clock calibration out. |
| * - WKUP pin 1 (PA0) if enabled. |
| * - WKUP pin 2 (PC13) if enabled. |
| * - WKUP pin 3 (PE6) if enabled. |
| * @retval None |
| */ |
| void HAL_PWR_EnterSTANDBYMode(void) |
| { |
| /* Select Standby mode */ |
| SET_BIT(PWR->CR, PWR_CR_PDDS); |
| |
| /* Set SLEEPDEEP bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); |
| |
| /* This option is used to ensure that store operations are completed */ |
| #if defined ( __CC_ARM) |
| __force_stores(); |
| #endif |
| /* Request Wait For Interrupt */ |
| __WFI(); |
| } |
| |
| |
| /** |
| * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. |
| * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor |
| * re-enters SLEEP mode when an interruption handling is over. |
| * Setting this bit is useful when the processor is expected to run only on |
| * interruptions handling. |
| * @retval None |
| */ |
| void HAL_PWR_EnableSleepOnExit(void) |
| { |
| /* Set SLEEPONEXIT bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); |
| } |
| |
| |
| /** |
| * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. |
| * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor |
| * re-enters SLEEP mode when an interruption handling is over. |
| * @retval None |
| */ |
| void HAL_PWR_DisableSleepOnExit(void) |
| { |
| /* Clear SLEEPONEXIT bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); |
| } |
| |
| |
| /** |
| * @brief Enables CORTEX M3 SEVONPEND bit. |
| * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes |
| * WFE to wake up when an interrupt moves from inactive to pended. |
| * @retval None |
| */ |
| void HAL_PWR_EnableSEVOnPend(void) |
| { |
| /* Set SEVONPEND bit of Cortex System Control Register */ |
| SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); |
| } |
| |
| |
| /** |
| * @brief Disables CORTEX M3 SEVONPEND bit. |
| * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes |
| * WFE to wake up when an interrupt moves from inactive to pended. |
| * @retval None |
| */ |
| void HAL_PWR_DisableSEVOnPend(void) |
| { |
| /* Clear SEVONPEND bit of Cortex System Control Register */ |
| CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); |
| } |
| |
| |
| |
| /** |
| * @brief This function handles the PWR PVD interrupt request. |
| * @note This API should be called under the PVD_IRQHandler(). |
| * @retval None |
| */ |
| void HAL_PWR_PVD_IRQHandler(void) |
| { |
| /* Check PWR exti flag */ |
| if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) |
| { |
| /* PWR PVD interrupt user callback */ |
| HAL_PWR_PVDCallback(); |
| |
| /* Clear PWR Exti pending bit */ |
| __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); |
| } |
| } |
| |
| /** |
| * @brief PWR PVD interrupt callback |
| * @retval None |
| */ |
| __weak void HAL_PWR_PVDCallback(void) |
| { |
| /* NOTE : This function Should not be modified, when the callback is needed, |
| the HAL_PWR_PVDCallback could be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* HAL_PWR_MODULE_ENABLED */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
