| /** |
| ****************************************************************************** |
| * @file stm32l4xx_hal_rtc_ex.h |
| * @author MCD Application Team |
| * @brief Header file of RTC HAL Extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32L4xx_HAL_RTC_EX_H |
| #define STM32L4xx_HAL_RTC_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l4xx_hal_def.h" |
| |
| /** @addtogroup STM32L4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx RTCEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup RTCEx_Exported_Types RTCEx Exported Types |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition |
| * @{ |
| */ |
| typedef struct |
| { |
| uint32_t Tamper; /*!< Specifies the Tamper Pin. |
| This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ |
| |
| uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. |
| This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ |
| |
| uint32_t Trigger; /*!< Specifies the Tamper Trigger. |
| This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ |
| |
| uint32_t NoErase; /*!< Specifies the Tamper no erase mode. |
| This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ |
| |
| uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. |
| This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ |
| |
| uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. |
| This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ |
| |
| uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. |
| This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ |
| |
| uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . |
| This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ |
| |
| uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . |
| This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ |
| |
| uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. |
| This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ |
| } RTC_TamperTypeDef; |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants |
| * @{ |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### RTC TimeStamp exported constants ##### */ |
| /* ========================================================================== */ |
| |
| /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges Definitions |
| * |
| * @{ |
| */ |
| #define RTC_TIMESTAMPEDGE_RISING 0x00000000u |
| #define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection |
| * @{ |
| */ |
| #define RTC_TIMESTAMPPIN_DEFAULT 0x00000000u |
| /** |
| * @} |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### RTC Wake-up exported constants ##### */ |
| /* ========================================================================== */ |
| |
| /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions |
| * @{ |
| */ |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000u |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) |
| #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 |
| #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) |
| /** |
| * @} |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### Extended RTC Peripheral Control exported constants ##### */ |
| /* ========================================================================== */ |
| |
| /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth Calib Period Definitions |
| * @{ |
| */ |
| #define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000u /*!< If RTCCLK = 32768 Hz, Smooth calibration |
| period is 32s, else 2exp20 RTCCLK pulses */ |
| #define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibration |
| period is 16s, else 2exp19 RTCCLK pulses */ |
| #define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibration |
| period is 8s, else 2exp18 RTCCLK pulses */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions |
| * @{ |
| */ |
| #define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added |
| during a X -second window = Y - CALM[8:0] |
| with Y = 512, 256, 128 when X = 32, 16, 8 */ |
| #define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000u /*!< The number of RTCCLK pulses subbstited |
| during a 32-second window = CALM[8:0] */ |
| /** |
| * @} |
| */ |
| |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| /** @defgroup RTCEx_Smooth_Calib_Low_Power_Definitions RTCEx Smooth Calib Low Power Definitions |
| * @{ |
| */ |
| #define RTC_LPCAL_SET RTC_CALR_LPCAL /*!< Calibration window is 220 ck_apre, |
| which is the required configuration for |
| ultra-low consumption mode. */ |
| #define RTC_LPCAL_RESET 0x00000000u /*!< Calibration window is 220 RTCCLK, |
| which is a high-consumption mode. |
| This mode should be set only when less |
| than 32s calibration window is required. */ |
| /** |
| * @} |
| */ |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output Selection Definitions |
| * @{ |
| */ |
| #define RTC_CALIBOUTPUT_512HZ 0x00000000u |
| #define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions |
| * @{ |
| */ |
| #define RTC_SHIFTADD1S_RESET 0x00000000u |
| #define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S |
| /** |
| * @} |
| */ |
| |
| |
| /* ========================================================================== */ |
| /* ##### RTC Tamper exported constants ##### */ |
| /* ========================================================================== */ |
| |
| /** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #if defined(RTC_TAMPER1_SUPPORT) |
| #define RTC_TAMPER_1 TAMP_CR1_TAMP1E |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| #define RTC_TAMPER_2 TAMP_CR1_TAMP2E |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_TAMPER_3 TAMP_CR1_TAMP3E |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| #define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E) |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #if defined(RTC_TAMPER1_SUPPORT) |
| #define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| #define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Triggers Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPERTRIGGER_RISINGEDGE 0x00u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ |
| #define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01u /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ |
| #define RTC_TAMPERTRIGGER_LOWLEVEL 0x02u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ |
| #define RTC_TAMPERTRIGGER_HIGHLEVEL 0x03u /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ |
| #else |
| #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000) |
| #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002) |
| #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE |
| #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper Mask Flag Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPERMASK_FLAG_DISABLE 0x00u |
| #define RTC_TAMPERMASK_FLAG_ENABLE 0x01u |
| #else |
| #define RTC_TAMPERMASK_FLAG_DISABLE 0x00000000u |
| #define RTC_TAMPERMASK_FLAG_ENABLE 0x00040000u |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00u |
| #define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01u |
| #else |
| #define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00000000u |
| #define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x00020000u |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ |
| |
| #define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 |
| consecutive samples at the active level */ |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #define RTC_TAMPERFILTER_DISABLE 0x00000000u /*!< Tamper filter is disabled */ |
| |
| #define RTC_TAMPERFILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8 |
| consecutive samples at the active level. */ |
| #endif /*#if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 32768 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 16384 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 8192 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 4096 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 2048 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 1024 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 512 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 TAMP_FLTCR_TAMPFREQ /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 256 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK TAMP_FLTCR_TAMPFREQ /*!< Masking all bits except those of |
| field TAMPFREQ[2:0]*/ |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000u /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 32768 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 16384 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 8192 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 4096 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 2048 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 1024 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 512 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 RTC_TAMPCR_TAMPFREQ /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 256 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK RTC_TAMPCR_TAMPFREQ /*!< Masking all bits except those of |
| field TAMPFREQ[2:0]*/ |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before |
| sampling during 1 RTCCLK cycle */ |
| #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before |
| sampling during 2 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before |
| sampling during 4 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK TAMP_FLTCR_TAMPPRCH /*!< Tamper pins are pre-charged before |
| sampling during 8 RTCCLK cycles */ |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000u /*!< Tamper pins are pre-charged before |
| sampling during 1 RTCCLK cycle */ |
| #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before |
| sampling during 2 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before |
| sampling during 4 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK RTC_TAMPCR_TAMPPRCH /*!< Tamper pins are pre-charged before |
| sampling during 8 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_MASK RTC_TAMPCR_TAMPPRCH /*!< Masking all bits except those of |
| field TAMPPRCH[1:0] */ |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull Up Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< Tamper pins are pre-charged before sampling */ |
| #define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ |
| #else |
| #define RTC_TAMPER_PULLUP_ENABLE 0x00000000u /*!< TimeStamp on Tamper Detection event saved */ |
| #define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< TimeStamp on Tamper Detection event is not saved */ |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ |
| #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ |
| #else |
| #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000u /*!< TimeStamp on Tamper Detection event is not saved */ |
| #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_IT_TAMP (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE) /*!< Enable all Tamper Interrupt */ |
| #define RTC_IT_TAMP1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ |
| #define RTC_IT_TAMP2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ |
| #define RTC_IT_TAMPALL RTC_IT_TAMP |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #define RTC_IT_TAMP RTC_TAMPCR_TAMPIE /*!< Enable all Tamper Interrupt */ |
| #define RTC_IT_TAMP1 RTC_TAMPCR_TAMP1IE /*!< Enable Tamper 1 Interrupt */ |
| #define RTC_IT_TAMP2 RTC_TAMPCR_TAMP2IE /*!< Enable Tamper 2 Interrupt */ |
| #define RTC_IT_TAMP3 RTC_TAMPCR_TAMP3IE /*!< Enable Tamper 3 Interrupt */ |
| #define RTC_IT_TAMPALL RTC_IT_TAMP |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Flags RTCEx Flags |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_FLAG_TAMP1F TAMP_SR_TAMP1F |
| #define RTC_FLAG_TAMP2F TAMP_SR_TAMP2F |
| #define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1F | RTC_FLAG_TAMP2F) |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #define RTC_FLAG_TAMP1F RTC_ISR_TAMP1F |
| #define RTC_FLAG_TAMP2F RTC_ISR_TAMP2F |
| #define RTC_FLAG_TAMP3F RTC_ISR_TAMP3F |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @} |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### Extended RTC Backup registers exported constants ##### */ |
| /* ========================================================================== */ |
| |
| /** @defgroup RTCEx_Backup_Data_Registers_Number_Definitions RTC Backup Data Registers Number Definitions |
| * @{ |
| */ |
| #if defined(RTC_BKP_NUMBER) |
| #define BKP_REG_NUMBER RTC_BKP_NUMBER |
| #endif /* RTC_BKP_NUMBER */ |
| #if defined(TAMP_BKP_NUMBER) |
| #define BKP_REG_NUMBER TAMP_BKP_NUMBER |
| #endif /* TAMP_BKP_NUMBER */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Backup_Data_Registers_Definitions RTCEx Backup Data Registers Definitions |
| * @{ |
| */ |
| #define RTC_BKP_DR0 0x00u |
| #define RTC_BKP_DR1 0x01u |
| #define RTC_BKP_DR2 0x02u |
| #define RTC_BKP_DR3 0x03u |
| #define RTC_BKP_DR4 0x04u |
| #define RTC_BKP_DR5 0x05u |
| #define RTC_BKP_DR6 0x06u |
| #define RTC_BKP_DR7 0x07u |
| #define RTC_BKP_DR8 0x08u |
| #define RTC_BKP_DR9 0x09u |
| #define RTC_BKP_DR10 0x0Au |
| #define RTC_BKP_DR11 0x0Bu |
| #define RTC_BKP_DR12 0x0Cu |
| #define RTC_BKP_DR13 0x0Du |
| #define RTC_BKP_DR14 0x0Eu |
| #define RTC_BKP_DR15 0x0Fu |
| #define RTC_BKP_DR16 0x10u |
| #define RTC_BKP_DR17 0x11u |
| #define RTC_BKP_DR18 0x12u |
| #define RTC_BKP_DR19 0x13u |
| #define RTC_BKP_DR20 0x14u |
| #define RTC_BKP_DR21 0x15u |
| #define RTC_BKP_DR22 0x16u |
| #define RTC_BKP_DR23 0x17u |
| #define RTC_BKP_DR24 0x18u |
| #define RTC_BKP_DR25 0x19u |
| #define RTC_BKP_DR26 0x1Au |
| #define RTC_BKP_DR27 0x1Bu |
| #define RTC_BKP_DR28 0x1Cu |
| #define RTC_BKP_DR29 0x1Du |
| #define RTC_BKP_DR30 0x1Eu |
| #define RTC_BKP_DR31 0x1Fu |
| /** |
| * @} |
| */ |
| |
| |
| |
| |
| /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Tamper Interrupts Definitions |
| * @{ |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define RTC_TAMPER1_INTERRUPT TAMP_IER_TAMP1IE |
| #define RTC_TAMPER2_INTERRUPT TAMP_IER_TAMP2IE |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #if defined(RTC_TAMPER1_SUPPORT) |
| #define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| #define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| #define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros |
| * @{ |
| */ |
| |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| /** @brief Clear the specified RTC pending flag. |
| * @param __HANDLE__ specifies the RTC Handle. |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be any combination of the following values: |
| * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag |
| * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag |
| * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag |
| * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag |
| * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag |
| * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag |
| * @retval None |
| */ |
| #define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SCR = (__FLAG__)) |
| |
| /** @brief Check whether the specified RTC flag is set or not. |
| * @param __HANDLE__ specifies the RTC Handle. |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be any combination of the following values: |
| * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag |
| * @arg @ref RTC_FLAG_INITF Initialization flag |
| * @arg @ref RTC_FLAG_RSF Registers synchronization flag |
| * @arg @ref RTC_FLAG_INITS Initialization status flag |
| * @arg @ref RTC_FLAG_SHPF Shift operation pending flag |
| * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag |
| * @arg @ref RTC_FLAG_ALRBWF Alarm B write flag |
| * @arg @ref RTC_FLAG_ALRAWF Alarm A write flag |
| * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag |
| * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag |
| * @arg @ref RTC_FLAG_TSF Time-stamp flag |
| * @arg @ref RTC_FLAG_WUTF Wakeup timer flag |
| * @arg @ref RTC_FLAG_ALRBF Alarm B flag |
| * @arg @ref RTC_FLAG_ALRAF Alarm A flag |
| * @retval None |
| */ |
| #define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) (((((__FLAG__)) >> 8U) == 1U) ? ((__HANDLE__)->Instance->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK))) : \ |
| ((__HANDLE__)->Instance->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_FLAG_MASK)))) |
| #endif /*#if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| /* ---------------------------------WAKEUPTIMER---------------------------------*/ |
| /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer |
| * @{ |
| */ |
| /** |
| * @brief Enable the RTC WakeUp Timer peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) |
| |
| /** |
| * @brief Disable the RTC WakeUp Timer peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) |
| |
| /** |
| * @brief Enable the RTC WakeUpTimer interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. |
| * This parameter can be: |
| * @arg @ref RTC_IT_WUT WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC WakeUpTimer interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. |
| * This parameter can be: |
| * @arg @ref RTC_IT_WUT WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) |
| |
| |
| /** |
| * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to check. |
| * This parameter can be: |
| * @arg @ref RTC_IT_WUT WakeUpTimer interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12)) != 0U) ? 1U : 0U) |
| #else |
| #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. |
| * This parameter can be: |
| * @arg @ref RTC_IT_WUT WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Get the selected RTC WakeUpTimer's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_WUTF |
| * @arg @ref RTC_FLAG_WUTWF |
| * @retval Flag status |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) |
| #else |
| #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @brief Clear the RTC Wake Up timer's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_WUTF |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_WUTF)) |
| #else |
| #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| #endif |
| |
| |
| /* WAKE-UP TIMER EXTI */ |
| /* ------------------ */ |
| /** |
| * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Enable event on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable event on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * This parameter can be: |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Clear the RTC WakeUp Timer associated Exti line flag. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @} |
| */ |
| |
| /* ---------------------------------TIMESTAMP---------------------------------*/ |
| /** @defgroup RTCEx_Timestamp RTC Timestamp |
| * @{ |
| */ |
| /** |
| * @brief Enable the RTC TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) |
| |
| /** |
| * @brief Disable the RTC TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) |
| |
| /** |
| * @brief Enable the RTC TimeStamp interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. |
| * This parameter can be: |
| * @arg @ref RTC_IT_TS TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC TimeStamp interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. |
| * This parameter can be: |
| * @arg @ref RTC_IT_TS TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to check. |
| * This parameter can be: |
| * @arg @ref RTC_IT_TS TimeStamp interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR) & ((__INTERRUPT__) >> 12)) != 0U) ? 1U : 0U) |
| #else |
| #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4)) != 0U) ? 1U : 0U) |
| #endif |
| /** |
| * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. |
| * This parameter can be: |
| * @arg @ref RTC_IT_TS TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Get the selected RTC TimeStamp's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_TSF |
| * @arg @ref RTC_FLAG_TSOVF |
| * @retval Flag status |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) |
| #else |
| #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @brief Clear the RTC Time Stamp's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_TSF |
| * @arg @ref RTC_FLAG_TSOVF |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), (__FLAG__))) |
| #else |
| #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| #endif |
| |
| /** |
| * @brief Enable the RTC internal TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) |
| |
| /** |
| * @brief Disable the RTC internal TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) |
| |
| /** |
| * @brief Get the selected RTC Internal Time Stamp's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_ITSF |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) |
| #else |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @brief Clear the RTC Internal Time Stamp's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_ITSF |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ITSF)) |
| #else |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| #endif |
| |
| |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| /** |
| * @brief Enable the RTC TimeStamp on Tamper detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPTS)) |
| |
| /** |
| * @brief Disable the RTC TimeStamp on Tamper detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPTS)) |
| |
| /** |
| * @brief Enable the RTC Tamper detection output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPOE)) |
| |
| /** |
| * @brief Disable the RTC Tamper detection output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPOE)) |
| |
| |
| /** |
| * @} |
| */ |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| |
| /* ------------------------------Calibration----------------------------------*/ |
| /** @defgroup RTCEx_Calibration RTC Calibration |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable the RTC calibration output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) |
| |
| /** |
| * @brief Disable the calibration output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) |
| |
| /** |
| * @brief Enable the clock reference detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) |
| |
| /** |
| * @brief Disable the clock reference detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) |
| |
| /** |
| * @brief Get the selected RTC shift operation's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. |
| * This parameter can be: |
| * @arg @ref RTC_FLAG_SHPF |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) |
| #else |
| #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* ------------------------------Tamper----------------------------------*/ |
| /** @defgroup RTCEx_Tamper RTCEx tamper |
| * @{ |
| */ |
| #if defined(RTC_TAMPER1_SUPPORT) |
| /** |
| * @brief Enable the RTC Tamper1 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (TAMP_CR1_TAMP1E)) |
| #else |
| #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E)) |
| #endif |
| |
| /** |
| * @brief Disable the RTC Tamper1 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(RTC_TAMPCR_TAMP1E)) |
| #else |
| #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E)) |
| #endif |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| |
| /** |
| * @brief Enable the RTC Tamper2 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 |= (TAMP_CR1_TAMP2E)) |
| #else |
| #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E)) |
| #endif |
| |
| /** |
| * @brief Disable the RTC Tamper2 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->CR1 &= ~(RTC_TAMPCR_TAMP2E)) |
| #else |
| #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E)) |
| #endif |
| |
| #if defined(RTC_TAMPER3_SUPPORT) |
| /** |
| * @brief Enable the RTC Tamper3 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E)) |
| |
| /** |
| * @brief Disable the RTC Tamper3 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E)) |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| |
| /**************************************************************************************************/ |
| /** |
| * @brief Enable the TAMP Tamper interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_TAMPALL: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER |= (__INTERRUPT__)) |
| #else |
| #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) |
| #endif |
| /** |
| * @brief Disable the TAMP Tamper interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_TAMPALL: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER &= ~(__INTERRUPT__)) |
| #else |
| #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) |
| #endif |
| |
| |
| /**************************************************************************************************/ |
| /** |
| * @brief Check whether the specified RTC Tamper interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. |
| * This parameter can be: |
| * @arg RTC_IT_TAMPALL: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->MISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| #else /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| #endif /* #if defined(STM32L412xx) || defined(STM32L422xx) */ |
| /** |
| * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. |
| * This parameter can be: |
| * @arg RTC_IT_TAMPALL: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->IER) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| #else |
| #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| #endif |
| |
| /** |
| * @brief Get the selected RTC Tamper's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_TAMP1F: Tamper1 flag |
| * @arg RTC_FLAG_TAMP2F: Tamper2 flag |
| * @arg RTC_FLAG_TAMP3F: Tamper3 flag |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SR) & (__FLAG__)) != 0U) |
| #else |
| #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) |
| #endif |
| /** |
| * @brief Clear the RTC Tamper's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Tamper Flag to clear. |
| * This parameter can be: |
| * @arg RTC_FLAG_TAMP1F: Tamper1 flag |
| * @arg RTC_FLAG_TAMP2F: Tamper2 flag |
| * @arg RTC_FLAG_TAMP3F: Tamper3 flag |
| * @retval None |
| */ |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((((TAMP_TypeDef *)((uint32_t)((__HANDLE__)->Instance) + (__HANDLE__)->TampOffset))->SCR) = (__FLAG__)) |
| #else |
| #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| #endif |
| |
| /** |
| * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0) |
| |
| /** |
| * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| |
| /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions |
| * @{ |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### RTC TimeStamp exported functions ##### */ |
| /* ========================================================================== */ |
| |
| /* RTC TimeStamp functions ****************************************************/ |
| |
| /** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); |
| HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); |
| void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); |
| void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### RTC Wake-up exported functions ##### */ |
| /* ========================================================================== */ |
| |
| /* RTC Wake-up functions ******************************************************/ |
| |
| /** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, uint32_t WakeUpAutoClr); |
| #else |
| HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); |
| #endif |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); |
| uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); |
| void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); |
| void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /* ========================================================================== */ |
| /* ##### Extended RTC Peripheral Control exported functions ##### */ |
| /* ========================================================================== */ |
| |
| /* Extended RTC Peripheral Control functions **********************************/ |
| |
| /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib); |
| #endif |
| HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); |
| HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); |
| /** |
| * @} |
| */ |
| |
| /* Extended RTC features functions *******************************************/ |
| /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions |
| * @{ |
| */ |
| |
| void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); |
| HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); |
| |
| #if defined(RTC_TAMPER1_SUPPORT) |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #if defined(RTC_TAMPER3_SUPPORT) |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| |
| #if defined(RTC_TAMPER1_SUPPORT) |
| void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); |
| #if defined(RTC_TAMPER3_SUPPORT) |
| void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions |
| * @{ |
| */ |
| void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); |
| uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup RTCEx_Private_Constants RTCEx Private Constants |
| * @{ |
| */ |
| #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT EXTI_IMR1_IM19 /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */ |
| #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR1_IM20 /*!< External interrupt line 20 Connected to the RTC Wakeup event */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup RTCEx_Private_Macros RTCEx Private Macros |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters |
| * @{ |
| */ |
| #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ |
| ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) |
| |
| #define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)0xFFB6FFFB) == 0x00) && ((INTERRUPT) != 0U)) |
| |
| #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) |
| |
| #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) |
| |
| #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) |
| |
| #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ |
| ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ |
| ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) |
| |
| #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ |
| ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) |
| |
| #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) |
| |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define IS_RTC_LOW_POWER_CALIB(LPCAL) (((LPCAL) == RTC_LPCAL_SET) || \ |
| ((LPCAL) == RTC_LPCAL_RESET)) |
| #endif |
| |
| #if defined(STM32L412xx) || defined(STM32L422xx) |
| #define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \ |
| (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U)) |
| #else |
| #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != 0U)) |
| #endif |
| |
| |
| #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ |
| ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ |
| ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ |
| ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) |
| |
| #define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ |
| ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) |
| |
| #define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ |
| ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) |
| |
| #define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ |
| ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ |
| ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ |
| ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) |
| |
| #define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ |
| ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) |
| |
| #define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ |
| ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ |
| ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ |
| ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) |
| |
| #define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ |
| ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) |
| |
| #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ |
| ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) |
| |
| #define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) |
| |
| #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ |
| ((SEL) == RTC_SHIFTADD1S_SET)) |
| |
| #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) |
| |
| #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ |
| ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* STM32L4xx_HAL_RTC_EX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
