| /** |
| ****************************************************************************** |
| * @file stm32l4xx_hal_adc_ex.h |
| * @author MCD Application Team |
| * @brief Header file of ADC HAL extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32L4xx_HAL_ADC_EX_H |
| #define STM32L4xx_HAL_ADC_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l4xx_hal_def.h" |
| |
| /** @addtogroup STM32L4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup ADCEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup ADCEx_Exported_Types ADC Extended Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief ADC Injected Conversion Oversampling structure definition |
| */ |
| typedef struct |
| { |
| uint32_t Ratio; /*!< Configures the oversampling ratio. |
| This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ |
| |
| uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. |
| This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ |
| } ADC_InjOversamplingTypeDef; |
| |
| /** |
| * @brief Structure definition of ADC group injected and ADC channel affected to ADC group injected |
| * @note Parameters of this structure are shared within 2 scopes: |
| * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, InjectedOffsetNumber, InjectedOffset |
| * - Scope ADC group injected (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, |
| * AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConv, ExternalTrigInjecConvEdge, InjecOversamplingMode, InjecOversampling. |
| * @note The setting of these parameters by function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. |
| * ADC state can be either: |
| * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'InjectedSingleDiff') |
| * - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext', 'InjecOversampling': ADC enabled without conversion on going on injected group. |
| * - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv': ADC enabled without conversion on going on regular and injected groups. |
| * - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going |
| * on ADC groups regular and injected. |
| * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed |
| * without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). |
| */ |
| typedef struct |
| { |
| uint32_t InjectedChannel; /*!< Specifies the channel to configure into ADC group injected. |
| This parameter can be a value of @ref ADC_HAL_EC_CHANNEL |
| Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */ |
| |
| uint32_t InjectedRank; /*!< Specifies the rank in the ADC group injected sequencer. |
| This parameter must be a value of @ref ADC_INJ_SEQ_RANKS. |
| Note: to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by |
| the new channel setting (or parameter number of conversions adjusted) */ |
| |
| uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. |
| Unit: ADC clock cycles. |
| Conversion time is the addition of sampling time and processing time |
| (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). |
| This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME. |
| Caution: This parameter applies to a channel that can be used in a regular and/or injected group. |
| It overwrites the last setting. |
| Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), |
| sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) |
| Refer to device datasheet for timings values. */ |
| |
| uint32_t InjectedSingleDiff; /*!< Selection of single-ended or differential input. |
| In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input). |
| Only channel 'i' has to be configured, channel 'i+1' is configured automatically. |
| This parameter must be a value of @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING. |
| Caution: This parameter applies to a channel that can be used in a regular and/or injected group. |
| It overwrites the last setting. |
| Note: Refer to Reference Manual to ensure the selected channel is available in differential mode. |
| Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately. |
| Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). |
| If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behavior in case |
| of another parameter update on the fly) */ |
| |
| uint32_t InjectedOffsetNumber; /*!< Selects the offset number. |
| This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB. |
| Caution: Only one offset is allowed per channel. This parameter overwrites the last setting. */ |
| |
| uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data. |
| Offset value must be a positive number. |
| Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number |
| between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. |
| Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled |
| without continuous mode or external trigger that could launch a conversion). */ |
| |
| uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the ADC group injected sequencer. |
| To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. |
| This parameter must be a number between Min_Data = 1 and Max_Data = 4. |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. */ |
| |
| FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of ADC group injected is performed in Complete-sequence/Discontinuous-sequence |
| (main sequence subdivided in successive parts). |
| Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. |
| Discontinuous mode can be enabled only if continuous mode is disabled. |
| This parameter can be set to ENABLE or DISABLE. |
| Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). |
| Note: For injected group, discontinuous mode converts the sequence channel by channel (discontinuous length fixed to 1 rank). |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. */ |
| |
| FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC group injected automatic conversion after regular one |
| This parameter can be set to ENABLE or DISABLE. |
| Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) |
| Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_INJECTED_SOFTWARE_START) |
| Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. |
| To maintain JAUTO always enabled, DMA must be configured in circular mode. |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. */ |
| |
| FunctionalState QueueInjectedContext; /*!< Specifies whether the context queue feature is enabled. |
| This parameter can be set to ENABLE or DISABLE. |
| If context queue is enabled, injected sequencer&channels configurations are queued on up to 2 contexts. If a |
| new injected context is set when queue is full, error is triggered by interruption and through function |
| 'HAL_ADCEx_InjectedQueueOverflowCallback'. |
| Caution: This feature request that the sequence is fully configured before injected conversion start. |
| Therefore, configure channels with as many calls to HAL_ADCEx_InjectedConfigChannel() as the 'InjectedNbrOfConversion' parameter. |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. |
| Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). */ |
| |
| uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. |
| If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled and software trigger is used instead. |
| This parameter can be a value of @ref ADC_injected_external_trigger_source. |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. */ |
| |
| uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. |
| This parameter can be a value of @ref ADC_injected_external_trigger_edge. |
| If trigger source is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded. |
| Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to |
| configure a channel on injected group can impact the configuration of other channels previously set. */ |
| |
| FunctionalState InjecOversamplingMode; /*!< Specifies whether the oversampling feature is enabled or disabled. |
| This parameter can be set to ENABLE or DISABLE. |
| Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ |
| |
| ADC_InjOversamplingTypeDef InjecOversampling; /*!< Specifies the Oversampling parameters. |
| Caution: this setting overwrites the previous oversampling configuration if oversampling already enabled. |
| Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ |
| } ADC_InjectionConfTypeDef; |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /** |
| * @brief Structure definition of ADC multimode |
| * @note The setting of these parameters by function HAL_ADCEx_MultiModeConfigChannel() is conditioned by ADCs state (both Master and Slave ADCs). |
| * Both Master and Slave ADCs must be disabled. |
| */ |
| typedef struct |
| { |
| uint32_t Mode; /*!< Configures the ADC to operate in independent or multimode. |
| This parameter can be a value of @ref ADC_HAL_EC_MULTI_MODE. */ |
| |
| uint32_t DMAAccessMode; /*!< Configures the DMA mode for multimode ADC: |
| selection whether 2 DMA channels (each ADC uses its own DMA channel) or 1 DMA channel (one DMA channel for both ADC, DMA of ADC master) |
| This parameter can be a value of @ref ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION. */ |
| |
| uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. |
| This parameter can be a value of @ref ADC_HAL_EC_MULTI_TWOSMP_DELAY. |
| Delay range depends on selected resolution: |
| from 1 to 12 clock cycles for 12 bits, from 1 to 10 clock cycles for 10 bits, |
| from 1 to 8 clock cycles for 8 bits, from 1 to 6 clock cycles for 6 bits. */ |
| } ADC_MultiModeTypeDef; |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup ADC_injected_external_trigger_source ADC group injected trigger source |
| * @{ |
| */ |
| /* ADC group regular trigger sources for all ADC instances */ |
| #define ADC_INJECTED_SOFTWARE_START (LL_ADC_INJ_TRIG_SOFTWARE) /*!< Software triggers injected group conversion start */ |
| #define ADC_EXTERNALTRIGINJEC_T1_TRGO (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T1_TRGO2 (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2) /*!< ADC group injected conversion trigger from external peripheral: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T1_CC4 (LL_ADC_INJ_TRIG_EXT_TIM1_CH4) /*!< ADC group injected conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T2_TRGO (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T2_CC1 (LL_ADC_INJ_TRIG_EXT_TIM2_CH1) /*!< ADC group injected conversion trigger from external peripheral: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T3_TRGO (LL_ADC_INJ_TRIG_EXT_TIM3_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T3_CC1 (LL_ADC_INJ_TRIG_EXT_TIM3_CH1) /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T3_CC3 (LL_ADC_INJ_TRIG_EXT_TIM3_CH3) /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T3_CC4 (LL_ADC_INJ_TRIG_EXT_TIM3_CH4) /*!< ADC group injected conversion trigger from external peripheral: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T4_TRGO (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T6_TRGO (LL_ADC_INJ_TRIG_EXT_TIM6_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T8_CC4 (LL_ADC_INJ_TRIG_EXT_TIM8_CH4) /*!< ADC group injected conversion trigger from external peripheral: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T8_TRGO (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T8_TRGO2 (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2) /*!< ADC group injected conversion trigger from external peripheral: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_T15_TRGO (LL_ADC_INJ_TRIG_EXT_TIM15_TRGO) /*!< ADC group injected conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ |
| #define ADC_EXTERNALTRIGINJEC_EXT_IT15 (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) /*!< ADC group injected conversion trigger from external peripheral: external interrupt line 15. Trigger edge set to rising edge (default setting). */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_injected_external_trigger_edge ADC group injected trigger edge (when external trigger is selected) |
| * @{ |
| */ |
| #define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE (0x00000000UL) /*!< Injected conversions hardware trigger detection disabled */ |
| #define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING (ADC_JSQR_JEXTEN_0) /*!< Injected conversions hardware trigger detection on the rising edge */ |
| #define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING (ADC_JSQR_JEXTEN_1) /*!< Injected conversions hardware trigger detection on the falling edge */ |
| #define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING (ADC_JSQR_JEXTEN) /*!< Injected conversions hardware trigger detection on both the rising and falling edges */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending |
| * @{ |
| */ |
| #define ADC_SINGLE_ENDED (LL_ADC_SINGLE_ENDED) /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */ |
| #define ADC_DIFFERENTIAL_ENDED (LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to differential (literal also used to set calibration mode) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_HAL_EC_OFFSET_NB ADC instance - Offset number |
| * @{ |
| */ |
| #define ADC_OFFSET_NONE (ADC_OFFSET_4 + 1U) /*!< ADC offset disabled: no offset correction for the selected ADC channel */ |
| #define ADC_OFFSET_1 (LL_ADC_OFFSET_1) /*!< ADC offset number 1: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ |
| #define ADC_OFFSET_2 (LL_ADC_OFFSET_2) /*!< ADC offset number 2: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ |
| #define ADC_OFFSET_3 (LL_ADC_OFFSET_3) /*!< ADC offset number 3: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ |
| #define ADC_OFFSET_4 (LL_ADC_OFFSET_4) /*!< ADC offset number 4: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks |
| * @{ |
| */ |
| #define ADC_INJECTED_RANK_1 (LL_ADC_INJ_RANK_1) /*!< ADC group injected sequencer rank 1 */ |
| #define ADC_INJECTED_RANK_2 (LL_ADC_INJ_RANK_2) /*!< ADC group injected sequencer rank 2 */ |
| #define ADC_INJECTED_RANK_3 (LL_ADC_INJ_RANK_3) /*!< ADC group injected sequencer rank 3 */ |
| #define ADC_INJECTED_RANK_4 (LL_ADC_INJ_RANK_4) /*!< ADC group injected sequencer rank 4 */ |
| /** |
| * @} |
| */ |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /** @defgroup ADC_HAL_EC_MULTI_MODE Multimode - Mode |
| * @{ |
| */ |
| #define ADC_MODE_INDEPENDENT (LL_ADC_MULTI_INDEPENDENT) /*!< ADC dual mode disabled (ADC independent mode) */ |
| #define ADC_DUALMODE_REGSIMULT (LL_ADC_MULTI_DUAL_REG_SIMULT) /*!< ADC dual mode enabled: group regular simultaneous */ |
| #define ADC_DUALMODE_INTERL (LL_ADC_MULTI_DUAL_REG_INTERL) /*!< ADC dual mode enabled: Combined group regular interleaved */ |
| #define ADC_DUALMODE_INJECSIMULT (LL_ADC_MULTI_DUAL_INJ_SIMULT) /*!< ADC dual mode enabled: group injected simultaneous */ |
| #define ADC_DUALMODE_ALTERTRIG (LL_ADC_MULTI_DUAL_INJ_ALTERN) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */ |
| #define ADC_DUALMODE_REGSIMULT_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */ |
| #define ADC_DUALMODE_REGSIMULT_ALTERTRIG (LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */ |
| #define ADC_DUALMODE_REGINTERL_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */ |
| |
| /** @defgroup ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION Multimode - DMA transfer mode depending on ADC resolution |
| * @{ |
| */ |
| #define ADC_DMAACCESSMODE_DISABLED (0x00000000UL) /*!< DMA multimode disabled: each ADC uses its own DMA channel */ |
| #define ADC_DMAACCESSMODE_12_10_BITS (ADC_CCR_MDMA_1) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 12 and 10 bits resolution */ |
| #define ADC_DMAACCESSMODE_8_6_BITS (ADC_CCR_MDMA) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 8 and 6 bits resolution */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_HAL_EC_MULTI_TWOSMP_DELAY Multimode - Delay between two sampling phases |
| * @{ |
| */ |
| #define ADC_TWOSAMPLINGDELAY_1CYCLE (LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE) /*!< ADC multimode delay between two sampling phases: 1 ADC clock cycle */ |
| #define ADC_TWOSAMPLINGDELAY_2CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES) /*!< ADC multimode delay between two sampling phases: 2 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_3CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES) /*!< ADC multimode delay between two sampling phases: 3 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_4CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES) /*!< ADC multimode delay between two sampling phases: 4 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_5CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_6CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_7CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_8CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_9CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_10CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_11CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */ |
| #define ADC_TWOSAMPLINGDELAY_12CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups |
| * @{ |
| */ |
| #define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ |
| #define ADC_INJECTED_GROUP (LL_ADC_GROUP_INJECTED) /*!< ADC group injected (not available on all STM32 devices)*/ |
| #define ADC_REGULAR_INJECTED_GROUP (LL_ADC_GROUP_REGULAR_INJECTED) /*!< ADC both groups regular and injected */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_CFGR_fields ADCx CFGR fields |
| * @{ |
| */ |
| #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) |
| #define ADC_CFGR_FIELDS (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN |\ |
| ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM |\ |
| ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN |\ |
| ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ |
| ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN |\ |
| ADC_CFGR_RES | ADC_CFGR_DFSDMCFG | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN) |
| #else |
| #define ADC_CFGR_FIELDS (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN |\ |
| ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM |\ |
| ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN |\ |
| ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ |
| ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN |\ |
| ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN ) |
| #endif /* ADC_CFGR_DFSDMCFG */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_SMPR1_fields ADCx SMPR1 fields |
| * @{ |
| */ |
| #if defined(ADC_SMPR1_SMPPLUS) |
| #define ADC_SMPR1_FIELDS (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 |\ |
| ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 |\ |
| ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1 |\ |
| ADC_SMPR1_SMP0 | ADC_SMPR1_SMPPLUS) |
| #else |
| #define ADC_SMPR1_FIELDS (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 |\ |
| ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 |\ |
| ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1 |\ |
| ADC_SMPR1_SMP0) |
| #endif /* ADC_SMPR1_SMPPLUS */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup ADC_CFGR_fields_2 ADCx CFGR sub fields |
| * @{ |
| */ |
| /* ADC_CFGR fields of parameters that can be updated when no conversion |
| (neither regular nor injected) is on-going */ |
| #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) |
| #define ADC_CFGR_FIELDS_2 ((ADC_CFGR_DMACFG | ADC_CFGR_AUTDLY | ADC_CFGR_DFSDMCFG)) |
| #else |
| #define ADC_CFGR_FIELDS_2 ((ADC_CFGR_DMACFG | ADC_CFGR_AUTDLY)) |
| #endif /* ADC_CFGR_DFSDMCFG */ |
| /** |
| * @} |
| */ |
| |
| #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) |
| /** @defgroup ADC_HAL_EC_REG_DFSDM_TRANSFER ADC group regular - DFSDM transfer of ADC conversion data |
| * @{ |
| */ |
| #define ADC_DFSDM_MODE_DISABLE (0x00000000UL) /*!< ADC conversions are not transferred by DFSDM. */ |
| #define ADC_DFSDM_MODE_ENABLE (LL_ADC_REG_DFSDM_TRANSFER_ENABLE) /*!< ADC conversion data are transferred to DFSDM for post processing. The ADC conversion data format must be 16-bit signed and right aligned, refer to reference manual. DFSDM transfer cannot be used if DMA transfer is enabled. */ |
| /** |
| * @} |
| */ |
| #endif /* ADC_CFGR_DFSDMCFG */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /** @defgroup ADCEx_Exported_Macro ADC Extended Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Force ADC instance in multimode mode independent (multimode disable). |
| * @note This macro must be used only in case of transition from multimode |
| * to mode independent and in case of unknown previous state, |
| * to ensure ADC configuration is in mode independent. |
| * @note Standard way of multimode configuration change is done from |
| * HAL ADC handle of ADC master using function |
| * "HAL_ADCEx_MultiModeConfigChannel(..., ADC_MODE_INDEPENDENT)" )". |
| * Usage of this macro is not the Standard way of multimode |
| * configuration and can lead to have HAL ADC handles status |
| * misaligned. Usage of this macro must be limited to cases |
| * mentioned above. |
| * @param __HANDLE__ ADC handle. |
| * @retval None |
| */ |
| #define ADC_FORCE_MODE_INDEPENDENT(__HANDLE__) \ |
| LL_ADC_SetMultimode(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance), LL_ADC_MULTI_INDEPENDENT) |
| |
| /** |
| * @} |
| */ |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros |
| * @{ |
| */ |
| /* Macro reserved for internal HAL driver usage, not intended to be used in */ |
| /* code of final user. */ |
| |
| /** |
| * @brief Test if conversion trigger of injected group is software start |
| * or external trigger. |
| * @param __HANDLE__ ADC handle. |
| * @retval SET (software start) or RESET (external trigger). |
| */ |
| #define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ |
| (((__HANDLE__)->Instance->JSQR & ADC_JSQR_JEXTEN) == 0UL) |
| |
| /** |
| * @brief Check if conversion is on going on regular or injected groups. |
| * @param __HANDLE__ ADC handle. |
| * @retval SET (conversion is on going) or RESET (no conversion is on going). |
| */ |
| #define ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED(__HANDLE__) \ |
| (( (((__HANDLE__)->Instance->CR) & (ADC_CR_ADSTART | ADC_CR_JADSTART)) == 0UL \ |
| ) ? RESET : SET) |
| |
| /** |
| * @brief Check if conversion is on going on injected group. |
| * @param __HANDLE__ ADC handle. |
| * @retval Value "0" (no conversion is on going) or value "1" (conversion is on going) |
| */ |
| #define ADC_IS_CONVERSION_ONGOING_INJECTED(__HANDLE__) \ |
| (LL_ADC_INJ_IsConversionOngoing((__HANDLE__)->Instance)) |
| |
| /** |
| * @brief Check whether or not ADC is independent. |
| * @param __HANDLE__ ADC handle. |
| * @note When multimode feature is not available, the macro always returns SET. |
| * @retval SET (ADC is independent) or RESET (ADC is not). |
| */ |
| #if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) |
| #define ADC_IS_INDEPENDENT(__HANDLE__) \ |
| ( ( ( ((__HANDLE__)->Instance) == ADC3) \ |
| )? \ |
| SET \ |
| : \ |
| RESET \ |
| ) |
| #elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) |
| #define ADC_IS_INDEPENDENT(__HANDLE__) (SET) |
| #elif defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) |
| #define ADC_IS_INDEPENDENT(__HANDLE__) (RESET) |
| #endif /* (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) */ |
| |
| /** |
| * @brief Set the selected injected Channel rank. |
| * @param __CHANNELNB__ Channel number. |
| * @param __RANKNB__ Rank number. |
| * @retval None |
| */ |
| #define ADC_JSQR_RK(__CHANNELNB__, __RANKNB__) ((((__CHANNELNB__)\ |
| & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << ((__RANKNB__) & ADC_INJ_RANK_ID_JSQR_MASK)) |
| |
| /** |
| * @brief Configure ADC injected context queue |
| * @param __INJECT_CONTEXT_QUEUE_MODE__ Injected context queue mode. |
| * @retval None |
| */ |
| #define ADC_CFGR_INJECT_CONTEXT_QUEUE(__INJECT_CONTEXT_QUEUE_MODE__) ((__INJECT_CONTEXT_QUEUE_MODE__) << ADC_CFGR_JQM_Pos) |
| |
| /** |
| * @brief Configure ADC discontinuous conversion mode for injected group |
| * @param __INJECT_DISCONTINUOUS_MODE__ Injected discontinuous mode. |
| * @retval None |
| */ |
| #define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) ((__INJECT_DISCONTINUOUS_MODE__) << ADC_CFGR_JDISCEN_Pos) |
| |
| /** |
| * @brief Configure ADC discontinuous conversion mode for regular group |
| * @param __REG_DISCONTINUOUS_MODE__ Regular discontinuous mode. |
| * @retval None |
| */ |
| #define ADC_CFGR_REG_DISCONTINUOUS(__REG_DISCONTINUOUS_MODE__) ((__REG_DISCONTINUOUS_MODE__) << ADC_CFGR_DISCEN_Pos) |
| |
| /** |
| * @brief Configure the number of discontinuous conversions for regular group. |
| * @param __NBR_DISCONTINUOUS_CONV__ Number of discontinuous conversions. |
| * @retval None |
| */ |
| #define ADC_CFGR_DISCONTINUOUS_NUM(__NBR_DISCONTINUOUS_CONV__) (((__NBR_DISCONTINUOUS_CONV__) - 1UL) << ADC_CFGR_DISCNUM_Pos) |
| |
| /** |
| * @brief Configure the ADC auto delay mode. |
| * @param __AUTOWAIT__ Auto delay bit enable or disable. |
| * @retval None |
| */ |
| #define ADC_CFGR_AUTOWAIT(__AUTOWAIT__) ((__AUTOWAIT__) << ADC_CFGR_AUTDLY_Pos) |
| |
| /** |
| * @brief Configure ADC continuous conversion mode. |
| * @param __CONTINUOUS_MODE__ Continuous mode. |
| * @retval None |
| */ |
| #define ADC_CFGR_CONTINUOUS(__CONTINUOUS_MODE__) ((__CONTINUOUS_MODE__) << ADC_CFGR_CONT_Pos) |
| |
| /** |
| * @brief Configure the ADC DMA continuous request. |
| * @param __DMACONTREQ_MODE__ DMA continuous request mode. |
| * @retval None |
| */ |
| #define ADC_CFGR_DMACONTREQ(__DMACONTREQ_MODE__) ((__DMACONTREQ_MODE__) << ADC_CFGR_DMACFG_Pos) |
| |
| /** |
| * @brief Configure the channel number into offset OFRx register. |
| * @param __CHANNEL__ ADC Channel. |
| * @retval None |
| */ |
| #define ADC_OFR_CHANNEL(__CHANNEL__) ((__CHANNEL__) << ADC_OFR1_OFFSET1_CH_Pos) |
| |
| /** |
| * @brief Configure the channel number into differential mode selection register. |
| * @param __CHANNEL__ ADC Channel. |
| * @retval None |
| */ |
| #define ADC_DIFSEL_CHANNEL(__CHANNEL__) (1UL << (__CHANNEL__)) |
| |
| /** |
| * @brief Configure calibration factor in differential mode to be set into calibration register. |
| * @param __CALIBRATION_FACTOR__ Calibration factor value. |
| * @retval None |
| */ |
| #define ADC_CALFACT_DIFF_SET(__CALIBRATION_FACTOR__) (((__CALIBRATION_FACTOR__)\ |
| & (ADC_CALFACT_CALFACT_D_Pos >> ADC_CALFACT_CALFACT_D_Pos) ) << ADC_CALFACT_CALFACT_D_Pos) |
| |
| /** |
| * @brief Calibration factor in differential mode to be retrieved from calibration register. |
| * @param __CALIBRATION_FACTOR__ Calibration factor value. |
| * @retval None |
| */ |
| #define ADC_CALFACT_DIFF_GET(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) >> ADC_CALFACT_CALFACT_D_Pos) |
| |
| /** |
| * @brief Configure the analog watchdog high threshold into registers TR1, TR2 or TR3. |
| * @param __THRESHOLD__ Threshold value. |
| * @retval None |
| */ |
| #define ADC_TRX_HIGHTHRESHOLD(__THRESHOLD__) ((__THRESHOLD__) << 16UL) |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /** |
| * @brief Configure the ADC DMA continuous request for ADC multimode. |
| * @param __DMACONTREQ_MODE__ DMA continuous request mode. |
| * @retval None |
| */ |
| #define ADC_CCR_MULTI_DMACONTREQ(__DMACONTREQ_MODE__) ((__DMACONTREQ_MODE__) << ADC_CCR_DMACFG_Pos) |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /** |
| * @brief Shift the offset with respect to the selected ADC resolution. |
| * @note Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0. |
| * If resolution 12 bits, no shift. |
| * If resolution 10 bits, shift of 2 ranks on the left. |
| * If resolution 8 bits, shift of 4 ranks on the left. |
| * If resolution 6 bits, shift of 6 ranks on the left. |
| * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). |
| * @param __HANDLE__ ADC handle |
| * @param __OFFSET__ Value to be shifted |
| * @retval None |
| */ |
| #define ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, __OFFSET__) \ |
| ((__OFFSET__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) |
| |
| /** |
| * @brief Shift the AWD1 threshold with respect to the selected ADC resolution. |
| * @note Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. |
| * If resolution 12 bits, no shift. |
| * If resolution 10 bits, shift of 2 ranks on the left. |
| * If resolution 8 bits, shift of 4 ranks on the left. |
| * If resolution 6 bits, shift of 6 ranks on the left. |
| * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). |
| * @param __HANDLE__ ADC handle |
| * @param __THRESHOLD__ Value to be shifted |
| * @retval None |
| */ |
| #define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ |
| ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) |
| |
| /** |
| * @brief Shift the AWD2 and AWD3 threshold with respect to the selected ADC resolution. |
| * @note Thresholds have to be left-aligned on bit 7. |
| * If resolution 12 bits, shift of 4 ranks on the right (the 4 LSB are discarded). |
| * If resolution 10 bits, shift of 2 ranks on the right (the 2 LSB are discarded). |
| * If resolution 8 bits, no shift. |
| * If resolution 6 bits, shift of 2 ranks on the left (the 2 LSB are set to 0). |
| * @param __HANDLE__ ADC handle |
| * @param __THRESHOLD__ Value to be shifted |
| * @retval None |
| */ |
| #define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ |
| ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0)) ? \ |
| ((__THRESHOLD__) >> ((4UL - ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3UL) * 2UL)) & 0x1FUL)) : \ |
| ((__THRESHOLD__) << 2UL) \ |
| ) |
| |
| /** |
| * @brief Clear Common Control Register. |
| * @param __HANDLE__ ADC handle. |
| * @retval None |
| */ |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| #define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, \ |
| ADC_CCR_CKMODE | \ |
| ADC_CCR_PRESC | \ |
| ADC_CCR_VBATEN | \ |
| ADC_CCR_TSEN | \ |
| ADC_CCR_VREFEN | \ |
| ADC_CCR_MDMA | \ |
| ADC_CCR_DMACFG | \ |
| ADC_CCR_DELAY | \ |
| ADC_CCR_DUAL) |
| #else |
| #define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, \ |
| ADC_CCR_CKMODE | \ |
| ADC_CCR_PRESC | \ |
| ADC_CCR_VBATEN | \ |
| ADC_CCR_TSEN | \ |
| ADC_CCR_VREFEN) |
| |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| #if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) |
| /** |
| * @brief Set handle instance of the ADC slave associated to the ADC master. |
| * @param __HANDLE_MASTER__ ADC master handle. |
| * @param __HANDLE_SLAVE__ ADC slave handle. |
| * @note if __HANDLE_MASTER__ is the handle of a slave ADC or an independent ADC, __HANDLE_SLAVE__ instance is set to NULL. |
| * @retval None |
| */ |
| #define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \ |
| ( (((__HANDLE_MASTER__)->Instance == ADC1)) ? ((__HANDLE_SLAVE__)->Instance = ADC2) : ((__HANDLE_SLAVE__)->Instance = NULL) ) |
| #endif /* defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */ |
| |
| |
| /** |
| * @brief Verify the ADC instance connected to the temperature sensor. |
| * @param __HANDLE__ ADC handle. |
| * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) |
| */ |
| #if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) |
| /* The temperature sensor measurement path (channel 17) is available on ADC1 */ |
| #define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) |
| #elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) |
| /* The temperature sensor measurement path (channel 17) is available on ADC1 and ADC3 */ |
| #define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__) ((((__HANDLE__)->Instance) == ADC1)\ |
| || (((__HANDLE__)->Instance) == ADC3)) |
| #endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */ |
| |
| /** |
| * @brief Verify the ADC instance connected to the battery voltage VBAT. |
| * @param __HANDLE__ ADC handle. |
| * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) |
| */ |
| #if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) |
| /* The battery voltage measurement path (channel 18) is available on ADC1 */ |
| #define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) |
| #elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) |
| /* The battery voltage measurement path (channel 18) is available on ADC1 and ADC3 */ |
| #define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__) ((((__HANDLE__)->Instance) == ADC1)\ |
| || (((__HANDLE__)->Instance) == ADC3)) |
| #endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */ |
| |
| /** |
| * @brief Verify the ADC instance connected to the internal voltage reference VREFINT. |
| * @param __HANDLE__ ADC handle. |
| * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) |
| */ |
| /* The internal voltage reference VREFINT measurement path (channel 0) is available on ADC1 */ |
| #define ADC_VREFINT_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) |
| |
| /** |
| * @brief Verify the length of scheduled injected conversions group. |
| * @param __LENGTH__ number of programmed conversions. |
| * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions) or RESET (__LENGTH__ is null or too large) |
| */ |
| #define IS_ADC_INJECTED_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1U)) && ((__LENGTH__) <= (4U))) |
| |
| /** |
| * @brief Calibration factor size verification (7 bits maximum). |
| * @param __CALIBRATION_FACTOR__ Calibration factor value. |
| * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) |
| */ |
| #define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) |
| |
| |
| /** |
| * @brief Verify the ADC channel setting. |
| * @param __HANDLE__ ADC handle. |
| * @param __CHANNEL__ programmed ADC channel. |
| * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) |
| */ |
| #if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) |
| #define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) ((((__HANDLE__)->Instance) == ADC1) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_17) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_18) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2))) |
| #elif defined (STM32L412xx) || defined (STM32L422xx) |
| #define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) (((((__HANDLE__)->Instance) == ADC1) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VBAT))) || \ |
| ((((__HANDLE__)->Instance) == ADC2) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) ))) |
| #elif defined (STM32L4P5xx) || defined (STM32L4Q5xx) |
| #define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) (((((__HANDLE__)->Instance) == ADC1) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_17) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_18) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VBAT))) || \ |
| ((((__HANDLE__)->Instance) == ADC2) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_17) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_18) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC2)|| \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC2) ))) |
| #elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) |
| #define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) (((((__HANDLE__)->Instance) == ADC1) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VBAT))) || \ |
| ((((__HANDLE__)->Instance) == ADC2) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_16) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_17) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_18) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC2))) || \ |
| ((((__HANDLE__)->Instance) == ADC3) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC3) ))) |
| #endif /* (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */ |
| |
| /** |
| * @brief Verify the ADC channel setting in differential mode. |
| * @param __HANDLE__ ADC handle. |
| * @param __CHANNEL__ programmed ADC channel. |
| * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) |
| */ |
| #if defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) |
| #define IS_ADC_DIFF_CHANNEL(__HANDLE__, __CHANNEL__) (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15) ) |
| #elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) |
| /* For ADC1 and ADC2, channels 1 to 15 are available in differential mode, |
| channels 0, 16 to 18 can be only used in single-ended mode. |
| For ADC3, channels 1 to 3 and 6 to 12 are available in differential mode, |
| channels 4, 5 and 13 to 18 can only be used in single-ended mode. */ |
| #define IS_ADC_DIFF_CHANNEL(__HANDLE__, __CHANNEL__) ((((((__HANDLE__)->Instance) == ADC1) || \ |
| (((__HANDLE__)->Instance) == ADC2)) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_4) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_5) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_13) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_14) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_15))) || \ |
| ((((__HANDLE__)->Instance) == ADC3) && \ |
| (((__CHANNEL__) == ADC_CHANNEL_1) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_2) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_3) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_6) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_7) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_8) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_9) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_10) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_11) || \ |
| ((__CHANNEL__) == ADC_CHANNEL_12) ))) |
| #endif /* (STM32L412xx) || defined (STM32L422xx) || defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) */ |
| |
| /** |
| * @brief Verify the ADC single-ended input or differential mode setting. |
| * @param __SING_DIFF__ programmed channel setting. |
| * @retval SET (__SING_DIFF__ is valid) or RESET (__SING_DIFF__ is invalid) |
| */ |
| #define IS_ADC_SINGLE_DIFFERENTIAL(__SING_DIFF__) (((__SING_DIFF__) == ADC_SINGLE_ENDED) || \ |
| ((__SING_DIFF__) == ADC_DIFFERENTIAL_ENDED) ) |
| |
| /** |
| * @brief Verify the ADC offset management setting. |
| * @param __OFFSET_NUMBER__ ADC offset management. |
| * @retval SET (__OFFSET_NUMBER__ is valid) or RESET (__OFFSET_NUMBER__ is invalid) |
| */ |
| #define IS_ADC_OFFSET_NUMBER(__OFFSET_NUMBER__) (((__OFFSET_NUMBER__) == ADC_OFFSET_NONE) || \ |
| ((__OFFSET_NUMBER__) == ADC_OFFSET_1) || \ |
| ((__OFFSET_NUMBER__) == ADC_OFFSET_2) || \ |
| ((__OFFSET_NUMBER__) == ADC_OFFSET_3) || \ |
| ((__OFFSET_NUMBER__) == ADC_OFFSET_4) ) |
| |
| /** |
| * @brief Verify the ADC injected channel setting. |
| * @param __CHANNEL__ programmed ADC injected channel. |
| * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) |
| */ |
| #define IS_ADC_INJECTED_RANK(__CHANNEL__) (((__CHANNEL__) == ADC_INJECTED_RANK_1) || \ |
| ((__CHANNEL__) == ADC_INJECTED_RANK_2) || \ |
| ((__CHANNEL__) == ADC_INJECTED_RANK_3) || \ |
| ((__CHANNEL__) == ADC_INJECTED_RANK_4) ) |
| |
| /** |
| * @brief Verify the ADC injected conversions external trigger. |
| * @param __HANDLE__ ADC handle. |
| * @param __INJTRIG__ programmed ADC injected conversions external trigger. |
| * @retval SET (__INJTRIG__ is a valid value) or RESET (__INJTRIG__ is invalid) |
| */ |
| #define IS_ADC_EXTTRIGINJEC(__HANDLE__, __INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_CC4) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_CC1) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC4) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T4_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_EXT_IT15) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_CC4) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO2) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_TRGO2) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC3) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC1) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T6_TRGO) || \ |
| ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T15_TRGO) || \ |
| ((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START) ) |
| |
| /** |
| * @brief Verify the ADC edge trigger setting for injected group. |
| * @param __EDGE__ programmed ADC edge trigger setting. |
| * @retval SET (__EDGE__ is a valid value) or RESET (__EDGE__ is invalid) |
| */ |
| #define IS_ADC_EXTTRIGINJEC_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ |
| ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ |
| ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ |
| ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /** |
| * @brief Verify the ADC multimode setting. |
| * @param __MODE__ programmed ADC multimode setting. |
| * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) |
| */ |
| #define IS_ADC_MULTIMODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT) || \ |
| ((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ |
| ((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ |
| ((__MODE__) == ADC_DUALMODE_REGINTERL_INJECSIMULT) || \ |
| ((__MODE__) == ADC_DUALMODE_INJECSIMULT) || \ |
| ((__MODE__) == ADC_DUALMODE_REGSIMULT) || \ |
| ((__MODE__) == ADC_DUALMODE_INTERL) || \ |
| ((__MODE__) == ADC_DUALMODE_ALTERTRIG) ) |
| |
| /** |
| * @brief Verify the ADC multimode DMA access setting. |
| * @param __MODE__ programmed ADC multimode DMA access setting. |
| * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) |
| */ |
| #define IS_ADC_DMA_ACCESS_MULTIMODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \ |
| ((__MODE__) == ADC_DMAACCESSMODE_12_10_BITS) || \ |
| ((__MODE__) == ADC_DMAACCESSMODE_8_6_BITS) ) |
| |
| /** |
| * @brief Verify the ADC multimode delay setting. |
| * @param __DELAY__ programmed ADC multimode delay setting. |
| * @retval SET (__DELAY__ is a valid value) or RESET (__DELAY__ is invalid) |
| */ |
| #define IS_ADC_SAMPLING_DELAY(__DELAY__) (((__DELAY__) == ADC_TWOSAMPLINGDELAY_1CYCLE) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_2CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_3CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_4CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ |
| ((__DELAY__) == ADC_TWOSAMPLINGDELAY_12CYCLES) ) |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /** |
| * @brief Verify the ADC analog watchdog setting. |
| * @param __WATCHDOG__ programmed ADC analog watchdog setting. |
| * @retval SET (__WATCHDOG__ is valid) or RESET (__WATCHDOG__ is invalid) |
| */ |
| #define IS_ADC_ANALOG_WATCHDOG_NUMBER(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_1) || \ |
| ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_2) || \ |
| ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_3) ) |
| |
| /** |
| * @brief Verify the ADC analog watchdog mode setting. |
| * @param __WATCHDOG_MODE__ programmed ADC analog watchdog mode setting. |
| * @retval SET (__WATCHDOG_MODE__ is valid) or RESET (__WATCHDOG_MODE__ is invalid) |
| */ |
| #define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ |
| ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) |
| |
| /** |
| * @brief Verify the ADC conversion (regular or injected or both). |
| * @param __CONVERSION__ ADC conversion group. |
| * @retval SET (__CONVERSION__ is valid) or RESET (__CONVERSION__ is invalid) |
| */ |
| #define IS_ADC_CONVERSION_GROUP(__CONVERSION__) (((__CONVERSION__) == ADC_REGULAR_GROUP) || \ |
| ((__CONVERSION__) == ADC_INJECTED_GROUP) || \ |
| ((__CONVERSION__) == ADC_REGULAR_INJECTED_GROUP) ) |
| |
| /** |
| * @brief Verify the ADC event type. |
| * @param __EVENT__ ADC event. |
| * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) |
| */ |
| #define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ |
| ((__EVENT__) == ADC_AWD_EVENT) || \ |
| ((__EVENT__) == ADC_AWD2_EVENT) || \ |
| ((__EVENT__) == ADC_AWD3_EVENT) || \ |
| ((__EVENT__) == ADC_OVR_EVENT) || \ |
| ((__EVENT__) == ADC_JQOVF_EVENT) ) |
| |
| /** |
| * @brief Verify the ADC oversampling ratio. |
| * @param __RATIO__ programmed ADC oversampling ratio. |
| * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) |
| */ |
| #define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ |
| ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) |
| |
| /** |
| * @brief Verify the ADC oversampling shift. |
| * @param __SHIFT__ programmed ADC oversampling shift. |
| * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) |
| */ |
| #define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ |
| ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) |
| |
| /** |
| * @brief Verify the ADC oversampling triggered mode. |
| * @param __MODE__ programmed ADC oversampling triggered mode. |
| * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) |
| */ |
| #define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ |
| ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) |
| |
| /** |
| * @brief Verify the ADC oversampling regular conversion resumed or continued mode. |
| * @param __MODE__ programmed ADC oversampling regular conversion resumed or continued mode. |
| * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) |
| */ |
| #define IS_ADC_REGOVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_REGOVERSAMPLING_CONTINUED_MODE) || \ |
| ((__MODE__) == ADC_REGOVERSAMPLING_RESUMED_MODE) ) |
| |
| /** |
| * @brief Verify the DFSDM mode configuration. |
| * @param __HANDLE__ ADC handle. |
| * @note When DMSDFM configuration is not supported, the macro systematically reports SET. For |
| * this reason, the input parameter is the ADC handle and not the configuration parameter |
| * directly. |
| * @retval SET (DFSDM mode configuration is valid) or RESET (DFSDM mode configuration is invalid) |
| */ |
| #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) |
| #define IS_ADC_DFSDMCFG_MODE(__HANDLE__) (((__HANDLE__)->Init.DFSDMConfig == ADC_DFSDM_MODE_DISABLE) || \ |
| ((__HANDLE__)->Init.DFSDMConfig == ADC_DFSDM_MODE_ENABLE) ) |
| #else |
| #define IS_ADC_DFSDMCFG_MODE(__HANDLE__) (SET) |
| #endif /* ADC_CFGR_DFSDMCFG */ |
| |
| /** |
| * @brief Return the DFSDM configuration mode. |
| * @param __HANDLE__ ADC handle. |
| * @note When DMSDFM configuration is not supported, the macro systematically reports 0x0 (i.e disabled). |
| * For this reason, the input parameter is the ADC handle and not the configuration parameter |
| * directly. |
| * @retval DFSDM configuration mode |
| */ |
| #if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) |
| #define ADC_CFGR_DFSDM(__HANDLE__) ((__HANDLE__)->Init.DFSDMConfig) |
| #else |
| #define ADC_CFGR_DFSDM(__HANDLE__) (0x0UL) |
| #endif /* ADC_CFGR_DFSDMCFG */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup ADCEx_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup ADCEx_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* IO operation functions *****************************************************/ |
| |
| /* ADC calibration */ |
| HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); |
| uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); |
| HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, |
| uint32_t CalibrationFactor); |
| |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); |
| |
| /* Non-blocking mode: Interruption */ |
| HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef *hadc); |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /* ADC multimode */ |
| HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); |
| HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); |
| uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc); |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /* ADC retrieve conversion value intended to be used with polling or interruption */ |
| uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef *hadc, uint32_t InjectedRank); |
| |
| /* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ |
| void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef *hadc); |
| void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef *hadc); |
| void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef *hadc); |
| void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef *hadc); |
| void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef *hadc); |
| |
| /* ADC group regular conversions stop */ |
| HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef *hadc); |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| HAL_StatusTypeDef HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef *hadc); |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup ADCEx_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* Peripheral Control functions ***********************************************/ |
| HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef *hadc, |
| ADC_InjectionConfTypeDef *sConfigInjected); |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode); |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef *hadc); |
| HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *hadc); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32L4xx_HAL_ADC_EX_H */ |