| /** |
| ****************************************************************************** |
| * @file stm32l4xx_hal_opamp.h |
| * @author MCD Application Team |
| * @brief Header file of OPAMP HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32L4xx_HAL_OPAMP_H |
| #define STM32L4xx_HAL_OPAMP_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l4xx_hal_def.h" |
| |
| /** @addtogroup STM32L4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup OPAMP |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /** @defgroup OPAMP_Exported_Types OPAMP Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief OPAMP Init structure definition |
| */ |
| |
| typedef struct |
| { |
| uint32_t PowerSupplyRange; /*!< Specifies the power supply range: above or under 2.4V. |
| This parameter must be a value of @ref OPAMP_PowerSupplyRange |
| Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */ |
| |
| uint32_t PowerMode; /*!< Specifies the power mode Normal or Low-Power. |
| This parameter must be a value of @ref OPAMP_PowerMode */ |
| |
| uint32_t Mode; /*!< Specifies the OPAMP mode |
| This parameter must be a value of @ref OPAMP_Mode |
| mode is either Standalone, - Follower or PGA */ |
| |
| uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & PGA modes |
| - In Standalone mode: i.e. when mode is OPAMP_STANDALONE_MODE |
| & PGA mode: i.e. when mode is OPAMP_PGA_MODE |
| This parameter must be a value of @ref OPAMP_InvertingInput |
| - In Follower mode i.e. when mode is OPAMP_FOLLOWER_MODE |
| This parameter is Not Applicable */ |
| |
| uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp: |
| This parameter must be a value of @ref OPAMP_NonInvertingInput */ |
| |
| uint32_t PgaGain; /*!< Specifies the gain in PGA mode |
| i.e. when mode is OPAMP_PGA_MODE. |
| This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */ |
| |
| uint32_t UserTrimming; /*!< Specifies the trimming mode |
| This parameter must be a value of @ref OPAMP_UserTrimming |
| UserTrimming is either factory or user trimming.*/ |
| |
| uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 31 |
| 16 is typical default value */ |
| |
| uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 31 |
| 16 is typical default value */ |
| |
| uint32_t TrimmingValuePLowPower; /*!< Specifies the offset trimming value (PMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 31 |
| 16 is typical default value */ |
| |
| uint32_t TrimmingValueNLowPower; /*!< Specifies the offset trimming value (NMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 31 |
| 16 is typical default value */ |
| |
| }OPAMP_InitTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| |
| typedef enum |
| { |
| HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPAMP is not yet Initialized */ |
| |
| HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */ |
| HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */ |
| |
| HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */ |
| HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005 /*!< OPAMP is locked |
| only system reset allows reconfiguring the opamp. */ |
| |
| }HAL_OPAMP_StateTypeDef; |
| |
| /** |
| * @brief OPAMP Handle Structure definition |
| */ |
| |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| typedef struct __OPAMP_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| { |
| OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */ |
| OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */ |
| HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */ |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| __IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */ |
| |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| void (* MspInitCallback) (struct __OPAMP_HandleTypeDef *hopamp); |
| void (* MspDeInitCallback) (struct __OPAMP_HandleTypeDef *hopamp); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| }OPAMP_HandleTypeDef; |
| |
| /** |
| * @brief HAl_OPAMP_TrimmingValueTypeDef definition |
| */ |
| |
| typedef uint32_t HAL_OPAMP_TrimmingValueTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL OPAMP Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_OPAMP_MSPINIT_CB_ID = 0x01U, /*!< OPAMP MspInit Callback ID */ |
| HAL_OPAMP_MSPDEINIT_CB_ID = 0x02U, /*!< OPAMP MspDeInit Callback ID */ |
| HAL_OPAMP_ALL_CB_ID = 0x03U /*!< OPAMP All ID */ |
| }HAL_OPAMP_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL OPAMP Callback pointer definition |
| */ |
| typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| |
| /* Exported constants --------------------------------------------------------*/ |
| |
| /** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup OPAMP_Mode OPAMP Mode |
| * @{ |
| */ |
| #define OPAMP_STANDALONE_MODE 0x00000000U /*!< standalone mode */ |
| #define OPAMP_PGA_MODE OPAMP_CSR_OPAMODE_1 /*!< PGA mode */ |
| #define OPAMP_FOLLOWER_MODE OPAMP_CSR_OPAMODE /*!< follower mode */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input |
| * @{ |
| */ |
| |
| #define OPAMP_NONINVERTINGINPUT_IO0 0x00000000U /*!< OPAMP non-inverting input connected to dedicated IO pin */ |
| #define OPAMP_NONINVERTINGINPUT_DAC_CH OPAMP_CSR_VPSEL /*!< OPAMP non-inverting input connected internally to DAC channel */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_InvertingInput OPAMP Inverting Input |
| * @{ |
| */ |
| |
| #define OPAMP_INVERTINGINPUT_IO0 0x00000000U /*!< OPAMP inverting input connected to dedicated IO pin low-leakage */ |
| #define OPAMP_INVERTINGINPUT_IO1 OPAMP_CSR_VMSEL_0 /*!< OPAMP inverting input connected to alternative IO pin available on some device packages */ |
| #define OPAMP_INVERTINGINPUT_CONNECT_NO OPAMP_CSR_VMSEL_1 /*!< OPAMP inverting input not connected externally (PGA mode only) */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_PgaGain OPAMP Pga Gain |
| * @{ |
| */ |
| |
| #define OPAMP_PGA_GAIN_2 0x00000000U /*!< PGA gain = 2 */ |
| #define OPAMP_PGA_GAIN_4 OPAMP_CSR_PGGAIN_0 /*!< PGA gain = 4 */ |
| #define OPAMP_PGA_GAIN_8 OPAMP_CSR_PGGAIN_1 /*!< PGA gain = 8 */ |
| #define OPAMP_PGA_GAIN_16 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain = 16 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_PowerMode OPAMP PowerMode |
| * @{ |
| */ |
| #define OPAMP_POWERMODE_NORMALPOWER 0x00000000U /*!< OPAMP power mode normal */ |
| #define OPAMP_POWERMODE_LOWPOWER OPAMP_CSR_OPALPM /*!< OPAMP power mode low-power */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_PowerSupplyRange OPAMP PowerSupplyRange |
| * @{ |
| */ |
| #define OPAMP_POWERSUPPLY_LOW 0x00000000U /*!< Power supply range low (VDDA lower than 2.4V) */ |
| #define OPAMP_POWERSUPPLY_HIGH OPAMP1_CSR_OPARANGE /*!< Power supply range high (VDDA higher than 2.4V) */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_UserTrimming OPAMP User Trimming |
| * @{ |
| */ |
| #define OPAMP_TRIMMING_FACTORY 0x00000000U /*!< Factory trimming */ |
| #define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming |
| * @{ |
| */ |
| #define OPAMP_FACTORYTRIMMING_DUMMY 0xFFFFFFFFU /*!< Dummy value if trimming value could not be retrieved */ |
| #define OPAMP_FACTORYTRIMMING_N 0U /*!< Offset trimming N */ |
| #define OPAMP_FACTORYTRIMMING_P 1U /*!< Offset trimming P */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup OPAMP_Private_Constants OPAMP Private Constants |
| * @brief OPAMP Private constants and defines |
| * @{ |
| */ |
| |
| /* NONINVERTING bit position in OTR & LPOTR */ |
| #define OPAMP_INPUT_NONINVERTING ((uint32_t) 8) /*!< Non inverting input */ |
| |
| /* Offset trimming time: during calibration, minimum time needed between two */ |
| /* steps to have 1 mV accuracy. */ |
| /* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=1ms.*/ |
| /* Unit: ms. */ |
| #define OPAMP_TRIMMING_DELAY ((uint32_t) 1) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset OPAMP handle state. |
| * @param __HANDLE__ OPAMP handle. |
| * @retval None |
| */ |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| #define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_OPAMP_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET) |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macro -------------------------------------------------------------*/ |
| |
| /** @defgroup OPAMP_Private_Macros OPAMP Private Macros |
| * @{ |
| */ |
| |
| #define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \ |
| ((INPUT) == OPAMP_PGA_MODE) || \ |
| ((INPUT) == OPAMP_FOLLOWER_MODE)) |
| |
| #if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ |
| defined (STM32L496xx) || defined (STM32L4A6xx) || \ |
| defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ |
| defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx) |
| #define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_INVERTINGINPUT_IO1)) |
| #endif /* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */ |
| /* STM32L496xx STM32L4A6xx */ |
| /* STM32L4P5xx STM32L4Q5xx */ |
| /* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */ |
| |
| #if defined (STM32L412xx) || defined (STM32L422xx) || \ |
| defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \ |
| defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) |
| #define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) ((INPUT) == OPAMP_INVERTINGINPUT_IO0) |
| #endif /* STM32L412xx STM32L422xx */ |
| /* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */ |
| /* STM32L451xx STM32L452xx STM32L462xx */ |
| |
| #if defined (STM32L412xx) || defined (STM32L422xx) |
| #define IS_OPAMP_NONINVERTING_INPUT(INPUT) ((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) |
| #endif /* STM32L412xx STM32L422xx */ |
| |
| #if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \ |
| defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || \ |
| defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ |
| defined (STM32L496xx) || defined (STM32L4A6xx) || \ |
| defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ |
| defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx) |
| #define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH)) |
| #endif /* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */ |
| /* STM32L451xx STM32L452xx STM32L462xx */ |
| /* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */ |
| /* STM32L496xx STM32L4A6xx */ |
| /* STM32L4P5xx STM32L4Q5xx */ |
| /* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */ |
| |
| #if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || \ |
| defined (STM32L496xx) || defined (STM32L4A6xx) || \ |
| defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ |
| defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx) |
| #define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_INVERTINGINPUT_IO1) || \ |
| ((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO)) |
| #endif /* STM32L471xx STM32L475xx STM32L476xx STM32L485xx STM32L486xx */ |
| /* STM32L496xx STM32L4A6xx */ |
| /* STM32L4P5xx STM32L4Q5xx */ |
| /* STM32L4R5xx STM32L4R7xx STM32L4R9xx STM32L4S5xx STM32L4S7xx STM32L4S9xx */ |
| |
| #if defined (STM32L412xx) || defined (STM32L422xx) || \ |
| defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || \ |
| defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) |
| #define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO)) |
| #endif /* STM32L412xx STM32L422xx */ |
| /* STM32L431xx STM32L432xx STM32L433xx STM32L442xx STM32L443xx */ |
| /* STM32L451xx STM32L452xx STM32L462xx */ |
| |
| #define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_4) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_8) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_16)) |
| |
| #define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMALPOWER) || \ |
| ((TRIMMING) == OPAMP_POWERMODE_LOWPOWER) ) |
| |
| #define IS_OPAMP_POWER_SUPPLY_RANGE(RANGE) (((RANGE) == OPAMP_POWERSUPPLY_LOW) || \ |
| ((RANGE) == OPAMP_POWERSUPPLY_HIGH) ) |
| |
| #define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \ |
| ((TRIMMING) == OPAMP_TRIMMING_USER)) |
| |
| |
| #define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 31U) |
| |
| #define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \ |
| ((TRIMMING) == OPAMP_FACTORYTRIMMING_P)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Include OPAMP HAL Extended module */ |
| #include "stm32l4xx_hal_opamp_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup OPAMP_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup OPAMP_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization/de-initialization functions **********************************/ |
| HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp); |
| void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp); |
| void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup OPAMP_Exported_Functions_Group2 |
| * @{ |
| */ |
| |
| /* I/O operation functions *****************************************************/ |
| HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup OPAMP_Exported_Functions_Group3 |
| * @{ |
| */ |
| |
| /* Peripheral Control functions ************************************************/ |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| /* OPAMP callback registering/unregistering */ |
| HAL_StatusTypeDef HAL_OPAMP_RegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID, pOPAMP_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_OPAMP_UnRegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp); |
| HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset); |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup OPAMP_Exported_Functions_Group4 |
| * @{ |
| */ |
| |
| /* Peripheral State functions **************************************************/ |
| HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32L4xx_HAL_OPAMP_H */ |
