Release v1.13.0
diff --git a/Inc/Legacy/stm32_hal_legacy.h b/Inc/Legacy/stm32_hal_legacy.h
index e57e823..1f40166 100644
--- a/Inc/Legacy/stm32_hal_legacy.h
+++ b/Inc/Legacy/stm32_hal_legacy.h
@@ -23,7 +23,7 @@
#define STM32_HAL_LEGACY
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -38,7 +38,6 @@
#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
-
/**
* @}
*/
@@ -383,7 +382,6 @@
#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT
#endif /* STM32H7 */
-
/**
* @}
*/
@@ -596,24 +594,24 @@
#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB)
#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB*/
#if defined(STM32L1)
- #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
#endif /* STM32L1 */
#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
#endif /* STM32F0 || STM32F3 || STM32F1 */
#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
@@ -774,49 +772,6 @@
#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1)
#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
-/** @brief Constants defining the events that can be selected to configure the
- * set/reset crossbar of a timer output
- */
-#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1)
-#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2)
-#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3)
-#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4)
-#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5)
-#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6)
-#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7)
-#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8)
-#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9)
-
-#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1)
-#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2)
-#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3)
-#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4)
-#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5)
-#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6)
-#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7)
-#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8)
-#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9)
-
-/** @brief Constants defining the event filtering applied to external events
- * by a timer
- */
-#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-
/** @brief Constants defining the DLL calibration periods (in micro seconds)
*/
#define HRTIM_CALIBRATIONRATE_7300 0x00000000U
@@ -896,7 +851,6 @@
#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
/**
* @}
*/
@@ -969,6 +923,11 @@
#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID
#endif
+#if defined(STM32L4) || defined(STM32L5)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER
+#elif defined(STM32G4)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED
+#endif
/**
* @}
@@ -980,15 +939,15 @@
#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
#if defined(STM32H7)
- #define I2S_IT_TXE I2S_IT_TXP
- #define I2S_IT_RXNE I2S_IT_RXP
+#define I2S_IT_TXE I2S_IT_TXP
+#define I2S_IT_RXNE I2S_IT_RXP
- #define I2S_FLAG_TXE I2S_FLAG_TXP
- #define I2S_FLAG_RXNE I2S_FLAG_RXP
+#define I2S_FLAG_TXE I2S_FLAG_TXP
+#define I2S_FLAG_RXNE I2S_FLAG_RXP
#endif
#if defined(STM32F7)
- #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
#endif
/**
* @}
@@ -1023,7 +982,7 @@
/**
* @}
*/
-
+
/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
* @{
*/
@@ -1123,16 +1082,16 @@
#if defined(STM32H7)
- #define SPI_FLAG_TXE SPI_FLAG_TXP
- #define SPI_FLAG_RXNE SPI_FLAG_RXP
+#define SPI_FLAG_TXE SPI_FLAG_TXP
+#define SPI_FLAG_RXNE SPI_FLAG_RXP
- #define SPI_IT_TXE SPI_IT_TXP
- #define SPI_IT_RXNE SPI_IT_RXP
+#define SPI_IT_TXE SPI_IT_TXP
+#define SPI_IT_RXNE SPI_IT_RXP
- #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
- #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
- #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
- #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
+#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
+#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
+#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
+#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
#endif /* STM32H7 */
@@ -1459,7 +1418,7 @@
#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
-#if defined(STM32L4) || defined(STM32L5) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
+#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt
#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End
@@ -1481,7 +1440,7 @@
#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT
#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT
-#endif /* STM32L4 || STM32L5 || STM32F4 || STM32F7 || STM32H7 */
+#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */
/**
* @}
*/
@@ -1495,7 +1454,8 @@
#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\
+ )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
#if defined(STM32L0)
@@ -1503,7 +1463,8 @@
#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
#endif
#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode
#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode
@@ -1526,9 +1487,9 @@
#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
* @{
@@ -1538,7 +1499,8 @@
#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\
+ )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT
@@ -1563,9 +1525,9 @@
#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA
#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA
#endif /* STM32F4 */
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
* @{
@@ -1620,9 +1582,9 @@
#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
* @{
@@ -1871,15 +1833,15 @@
#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
#if defined(STM32H7)
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
#else
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
#endif /* STM32H7 */
#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
@@ -2090,8 +2052,8 @@
*/
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
- ((WAVE) == DAC_WAVE_NOISE)|| \
- ((WAVE) == DAC_WAVE_TRIANGLE))
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
/**
* @}
@@ -2147,7 +2109,7 @@
#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
#if defined(STM32H7)
- #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
+#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
#endif
/**
@@ -2284,7 +2246,8 @@
#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
@@ -3252,7 +3215,7 @@
#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
-#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL)
#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
#else
#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
@@ -3381,7 +3344,7 @@
/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
* @{
*/
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL)
#else
#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
#endif
@@ -3401,19 +3364,19 @@
#else
#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
(((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
#endif /* STM32F1 */
#define IS_ALARM IS_RTC_ALARM
@@ -3597,6 +3560,13 @@
#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7)
+#define USART_OVERSAMPLING_16 0x00000000U
+#define USART_OVERSAMPLING_8 USART_CR1_OVER8
+
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+ ((__SAMPLING__) == USART_OVERSAMPLING_8))
+#endif /* STM32F0 || STM32F3 || STM32F7 */
/**
* @}
*/
diff --git a/Inc/stm32l4xx_hal_conf_template.h b/Inc/stm32l4xx_hal_conf_template.h
index ca41261..26fb6c4 100644
--- a/Inc/stm32l4xx_hal_conf_template.h
+++ b/Inc/stm32l4xx_hal_conf_template.h
@@ -126,7 +126,7 @@
* When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
* which is subject to manufacturing process variations.
*/
-#if !defined (HSI48_VALUE)
+#if !defined (HSI48_VALUE)
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
The real value my vary depending on manufacturing process variations.*/
#endif /* HSI48_VALUE */
@@ -134,7 +134,7 @@
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
-#if !defined (LSI_VALUE)
+#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@@ -153,7 +153,7 @@
/**
* @brief External clock source for SAI1 peripheral
- * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
* frequency.
*/
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
@@ -162,7 +162,7 @@
/**
* @brief External clock source for SAI2 peripheral
- * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+ * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
* frequency.
*/
#if !defined (EXTERNAL_SAI2_CLOCK_VALUE)
diff --git a/Inc/stm32l4xx_hal_exti.h b/Inc/stm32l4xx_hal_exti.h
index 470d71c..67d624d 100644
--- a/Inc/stm32l4xx_hal_exti.h
+++ b/Inc/stm32l4xx_hal_exti.h
@@ -701,21 +701,21 @@
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
-#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \
- ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
- (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
- (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
- (((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \
+#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+ ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
+ (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
+ (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
+ (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \
(((EXTI_LINE_NB / 32u) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32u))))
-#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
- (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+ (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
-#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
-#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
-#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u)
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
#if defined(STM32L412xx) || defined(STM32L422xx)
diff --git a/Inc/stm32l4xx_hal_gpio_ex.h b/Inc/stm32l4xx_hal_gpio_ex.h
index e705fa8..3d01e60 100644
--- a/Inc/stm32l4xx_hal_gpio_ex.h
+++ b/Inc/stm32l4xx_hal_gpio_ex.h
@@ -719,6 +719,8 @@
*/
#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM1 Alternate Function mapping */
#define GPIO_AF6_I2C3 ((uint8_t)0x06) /* I2C3 Alternate Function mapping */
+#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OctoSPI Manager Port 1 Alternate Function mapping */
+#define GPIO_AF6_OCTOSPIM_P2 ((uint8_t)0x06) /* OctoSPI Manager Port 2 Alternate Function mapping */
#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */
/**
diff --git a/Inc/stm32l4xx_hal_hcd.h b/Inc/stm32l4xx_hal_hcd.h
index 21e4791..da363f7 100644
--- a/Inc/stm32l4xx_hal_hcd.h
+++ b/Inc/stm32l4xx_hal_hcd.h
@@ -33,7 +33,7 @@
* @{
*/
-/** @addtogroup HCD
+/** @addtogroup HCD HCD
* @{
*/
@@ -111,6 +111,9 @@
#define HCD_SPEED_FULL USBH_FSLS_SPEED
#define HCD_SPEED_LOW USBH_FSLS_SPEED
+#define HCD_DEVICE_SPEED_FULL 1U
+#define HCD_DEVICE_SPEED_LOW 2U
+
/**
* @}
*/
@@ -213,10 +216,16 @@
* @}
*/
-HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID, pHCD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID);
+HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd,
+ HAL_HCD_CallbackIDTypeDef CallbackID,
+ pHCD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd,
+ HAL_HCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd,
+ pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd);
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
/**
@@ -266,6 +275,7 @@
uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+
/**
* @}
*/
@@ -278,36 +288,17 @@
/** @defgroup HCD_Private_Macros HCD Private Macros
* @{
*/
-
/**
* @}
*/
-
/* Private functions prototypes ----------------------------------------------*/
-/** @defgroup HCD_Private_Functions_Prototypes HCD Private Functions Prototypes
- * @{
- */
/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup HCD_Private_Functions HCD Private Functions
- * @{
- */
-
+ * @}
+ */
/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
+ * @}
+ */
#endif /* defined (USB_OTG_FS) */
#ifdef __cplusplus
diff --git a/Inc/stm32l4xx_hal_irda.h b/Inc/stm32l4xx_hal_irda.h
index 217cc40..c362909 100644
--- a/Inc/stm32l4xx_hal_irda.h
+++ b/Inc/stm32l4xx_hal_irda.h
@@ -91,7 +91,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL IRDA Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -108,7 +108,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
diff --git a/Inc/stm32l4xx_hal_lptim.h b/Inc/stm32l4xx_hal_lptim.h
index 371cca6..db8d2e7 100644
--- a/Inc/stm32l4xx_hal_lptim.h
+++ b/Inc/stm32l4xx_hal_lptim.h
@@ -403,10 +403,10 @@
*/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \
- (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
+ (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
#else
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
@@ -570,7 +570,8 @@
* @retval Interrupt status.
*/
-#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/**
* @brief Enable the LPTIM1 EXTI line in interrupt mode.
@@ -582,7 +583,8 @@
* @brief Disable the LPTIM1 EXTI line in interrupt mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR2 &= ~(LPTIM_EXTI_LINE_LPTIM1))
+#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR2\
+ &= ~(LPTIM_EXTI_LINE_LPTIM1))
/**
@@ -595,7 +597,8 @@
* @brief Disable the LPTIM1 EXTI line in event mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR2 &= ~(LPTIM_EXTI_LINE_LPTIM1))
+#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR2\
+ &= ~(LPTIM_EXTI_LINE_LPTIM1))
/**
* @brief Enable the LPTIM2 EXTI line in interrupt mode.
@@ -607,7 +610,8 @@
* @brief Disable the LPTIM2 EXTI line in interrupt mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR2 &= ~(LPTIM_EXTI_LINE_LPTIM2))
+#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR2\
+ &= ~(LPTIM_EXTI_LINE_LPTIM2))
/**
@@ -620,7 +624,8 @@
* @brief Disable the LPTIM2 EXTI line in event mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR2 &= ~(LPTIM_EXTI_LINE_LPTIM2))
+#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR2\
+ &= ~(LPTIM_EXTI_LINE_LPTIM2))
/**
* @}
@@ -632,9 +637,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group1
- * @brief Initialization and Configuration functions.
- * @{
- */
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
@@ -647,9 +652,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group2
- * @brief Start-Stop operation functions.
- * @{
- */
+ * @brief Start-Stop operation functions.
+ * @{
+ */
/* Start/Stop operation functions *********************************************/
/* ################################# PWM Mode ################################*/
/* Blocking mode: Polling */
@@ -703,9 +708,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group3
- * @brief Read operation functions.
- * @{
- */
+ * @brief Read operation functions.
+ * @{
+ */
/* Reading operation functions ************************************************/
uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
@@ -715,9 +720,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group4
- * @brief LPTIM IRQ handler and callback functions.
- * @{
- */
+ * @brief LPTIM IRQ handler and callback functions.
+ * @{
+ */
/* LPTIM IRQ functions *******************************************************/
void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
@@ -736,7 +741,8 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID,
+ pLPTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
@@ -744,9 +750,9 @@
*/
/** @addtogroup LPTIM_Group5
- * @brief Peripheral State functions.
- * @{
- */
+ * @brief Peripheral State functions.
+ * @{
+ */
/* Peripheral State functions ************************************************/
HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
/**
@@ -854,20 +860,20 @@
#endif
#define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \
- ((((__INSTANCE__) == LPTIM1) && \
- (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \
- || \
- (((__INSTANCE__) == LPTIM2) && \
- (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2))))
+ ((((__INSTANCE__) == LPTIM1) && \
+ (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \
+ || \
+ (((__INSTANCE__) == LPTIM2) && \
+ (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2))))
#define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \
- (((__INSTANCE__) == LPTIM1) && \
- (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2)))
+ (((__INSTANCE__) == LPTIM1) && \
+ (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2)))
/**
* @}
diff --git a/Inc/stm32l4xx_hal_nand.h b/Inc/stm32l4xx_hal_nand.h
index 6348a4c..f1a2ebd 100644
--- a/Inc/stm32l4xx_hal_nand.h
+++ b/Inc/stm32l4xx_hal_nand.h
@@ -134,7 +134,7 @@
void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp Init callback */
void (* MspDeInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp DeInit callback */
void (* ItCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND IT callback */
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
} NAND_HandleTypeDef;
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
@@ -152,7 +152,7 @@
* @brief HAL NAND Callback pointer definition
*/
typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand);
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -176,7 +176,7 @@
} while(0)
#else
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -243,7 +243,7 @@
HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId,
pNAND_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId);
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -288,19 +288,19 @@
#define CMD_AREA (1UL<<16U) /* A16 = CLE high */
#define ADDR_AREA (1UL<<17U) /* A17 = ALE high */
-#define NAND_CMD_AREA_A 0x00U
-#define NAND_CMD_AREA_B 0x01U
-#define NAND_CMD_AREA_C 0x50U
-#define NAND_CMD_AREA_TRUE1 0x30U
+#define NAND_CMD_AREA_A ((uint8_t)0x00)
+#define NAND_CMD_AREA_B ((uint8_t)0x01)
+#define NAND_CMD_AREA_C ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
-#define NAND_CMD_WRITE0 0x80U
-#define NAND_CMD_WRITE_TRUE1 0x10U
-#define NAND_CMD_ERASE0 0x60U
-#define NAND_CMD_ERASE1 0xD0U
-#define NAND_CMD_READID 0x90U
-#define NAND_CMD_STATUS 0x70U
-#define NAND_CMD_LOCK_STATUS 0x7AU
-#define NAND_CMD_RESET 0xFFU
+#define NAND_CMD_WRITE0 ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
+#define NAND_CMD_READID ((uint8_t)0x90)
+#define NAND_CMD_STATUS ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
+#define NAND_CMD_RESET ((uint8_t)0xFF)
/* NAND memory status */
#define NAND_VALID_ADDRESS 0x00000100UL
@@ -325,7 +325,8 @@
* @retval NAND Raw address value
*/
#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
- (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize)))
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * \
+ ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize)))
/**
* @brief NAND memory Column address computation.
diff --git a/Inc/stm32l4xx_hal_nor.h b/Inc/stm32l4xx_hal_nor.h
index 138912f..62d00c2 100644
--- a/Inc/stm32l4xx_hal_nor.h
+++ b/Inc/stm32l4xx_hal_nor.h
@@ -25,7 +25,7 @@
extern "C" {
#endif
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_ll_fmc.h"
@@ -126,7 +126,7 @@
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */
void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
} NOR_HandleTypeDef;
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
@@ -143,7 +143,7 @@
* @brief HAL NOR Callback pointer definition
*/
typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor);
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -165,7 +165,7 @@
} while(0)
#else
#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -214,7 +214,7 @@
HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId,
pNOR_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId);
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -258,23 +258,23 @@
#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
/* NOR CFI IDs addresses */
-#define CFI1_ADDRESS ((uint16_t)0x61)
-#define CFI2_ADDRESS ((uint16_t)0x62)
-#define CFI3_ADDRESS ((uint16_t)0x63)
-#define CFI4_ADDRESS ((uint16_t)0x64)
+#define CFI1_ADDRESS ((uint16_t)0x0061)
+#define CFI2_ADDRESS ((uint16_t)0x0062)
+#define CFI3_ADDRESS ((uint16_t)0x0063)
+#define CFI4_ADDRESS ((uint16_t)0x0064)
/* NOR operation wait timeout */
#define NOR_TMEOUT ((uint16_t)0xFFFF)
/* NOR memory data width */
-#define NOR_MEMORY_8B ((uint8_t)0x0)
-#define NOR_MEMORY_16B ((uint8_t)0x1)
+#define NOR_MEMORY_8B ((uint8_t)0x00)
+#define NOR_MEMORY_16B ((uint8_t)0x01)
/* NOR memory device read/write start address */
-#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000)
-#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000)
-#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000)
-#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000)
+#define NOR_MEMORY_ADRESS1 (0x60000000U)
+#define NOR_MEMORY_ADRESS2 (0x64000000U)
+#define NOR_MEMORY_ADRESS3 (0x68000000U)
+#define NOR_MEMORY_ADRESS4 (0x6C000000U)
/**
* @}
*/
diff --git a/Inc/stm32l4xx_hal_opamp.h b/Inc/stm32l4xx_hal_opamp.h
index 90f565c..4e520c7 100644
--- a/Inc/stm32l4xx_hal_opamp.h
+++ b/Inc/stm32l4xx_hal_opamp.h
@@ -223,8 +223,8 @@
/** @defgroup OPAMP_PowerMode OPAMP PowerMode
* @{
*/
-#define OPAMP_POWERMODE_NORMAL 0x00000000U
-#define OPAMP_POWERMODE_LOWPOWER OPAMP_CSR_OPALPM
+#define OPAMP_POWERMODE_NORMALPOWER 0x00000000U /*!< OPAMP power mode normal */
+#define OPAMP_POWERMODE_LOWPOWER OPAMP_CSR_OPALPM /*!< OPAMP power mode low-power */
/**
* @}
diff --git a/Inc/stm32l4xx_hal_pcd.h b/Inc/stm32l4xx_hal_pcd.h
index 0c53877..c36508b 100644
--- a/Inc/stm32l4xx_hal_pcd.h
+++ b/Inc/stm32l4xx_hal_pcd.h
@@ -211,12 +211,11 @@
#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
-#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
- ~(USB_OTG_PCGCCTL_STOPCLK)
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK)
-#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
-#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR1 |= USB_OTG_FS_WAKEUP_EXTI_LINE
#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
@@ -290,25 +289,41 @@
* @}
*/
-HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
+HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd,
+ HAL_PCD_CallbackIDTypeDef CallbackID,
+ pPCD_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd,
+ HAL_PCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_DataOutStageCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_DataInStageCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_IsoOutIncpltCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_IsoInIncpltCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_BcdCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_LpmCallbackTypeDef pCallback);
+
HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
/**
@@ -347,16 +362,24 @@
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+ uint16_t ep_mps, uint8_t ep_type);
+
HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+ uint8_t *pBuf, uint32_t len);
+
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+ uint8_t *pBuf, uint32_t len);
+
+
HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+
+uint32_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
/**
* @}
*/
@@ -471,10 +494,10 @@
#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue))
/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
/* ENDPOINT transfer */
-#define USB_EP0StartXfer USB_EPStartXfer
+#define USB_EP0StartXfer USB_EPStartXfer
/**
* @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
@@ -483,8 +506,7 @@
* @param wType Endpoint Type.
* @retval None
*/
-#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
+#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
/**
* @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
@@ -501,18 +523,19 @@
* @param bEpNum, bDir
* @retval None
*/
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) do { \
- if ((bDir) == 0U) \
- { \
- /* OUT double buffered endpoint */ \
- PCD_TX_DTOG((USBx), (bEpNum)); \
- } \
- else if ((bDir) == 1U) \
- { \
- /* IN double buffered endpoint */ \
- PCD_RX_DTOG((USBx), (bEpNum)); \
- } \
-} while(0)
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \
+ do { \
+ if ((bDir) == 0U) \
+ { \
+ /* OUT double buffered endpoint */ \
+ PCD_TX_DTOG((USBx), (bEpNum)); \
+ } \
+ else if ((bDir) == 1U) \
+ { \
+ /* IN double buffered endpoint */ \
+ PCD_RX_DTOG((USBx), (bEpNum)); \
+ } \
+ } while(0)
/**
* @brief sets the status for tx transfer (bits STAT_TX[1:0]).
@@ -521,21 +544,22 @@
* @param wState new state
* @retval None
*/
-#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) do { \
- uint16_t _wRegVal; \
- \
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) \
+ do { \
+ uint16_t _wRegVal; \
+ \
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK; \
- /* toggle first bit ? */ \
- if ((USB_EPTX_DTOG1 & (wState))!= 0U) \
- { \
+ /* toggle first bit ? */ \
+ if ((USB_EPTX_DTOG1 & (wState))!= 0U) \
+ { \
_wRegVal ^= USB_EPTX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if ((USB_EPTX_DTOG2 & (wState))!= 0U) \
- { \
+ } \
+ /* toggle second bit ? */ \
+ if ((USB_EPTX_DTOG2 & (wState))!= 0U) \
+ { \
_wRegVal ^= USB_EPTX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
} while(0) /* PCD_SET_EP_TX_STATUS */
/**
@@ -545,19 +569,20 @@
* @param wState new state
* @retval None
*/
-#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) do { \
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK; \
/* toggle first bit ? */ \
if ((USB_EPRX_DTOG1 & (wState))!= 0U) \
{ \
- _wRegVal ^= USB_EPRX_DTOG1; \
+ _wRegVal ^= USB_EPRX_DTOG1; \
} \
/* toggle second bit ? */ \
if ((USB_EPRX_DTOG2 & (wState))!= 0U) \
{ \
- _wRegVal ^= USB_EPRX_DTOG2; \
+ _wRegVal ^= USB_EPRX_DTOG2; \
} \
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX)); \
} while(0) /* PCD_SET_EP_RX_STATUS */
@@ -570,7 +595,8 @@
* @param wStatetx new state.
* @retval None
*/
-#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) do { \
+#define PCD_SET_EP_TXRX_STATUS(USBx, bEpNum, wStaterx, wStatetx) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK | USB_EPTX_STAT); \
@@ -632,7 +658,8 @@
* @param bEpNum Endpoint Number.
* @retval None
*/
-#define PCD_SET_EP_KIND(USBx, bEpNum) do { \
+#define PCD_SET_EP_KIND(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
@@ -640,7 +667,8 @@
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_KIND)); \
} while(0) /* PCD_SET_EP_KIND */
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum) do { \
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK; \
@@ -672,7 +700,8 @@
* @param bEpNum Endpoint Number.
* @retval None
*/
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) do { \
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0x7FFFU & USB_EPREG_MASK); \
@@ -680,7 +709,8 @@
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_TX)); \
} while(0) /* PCD_CLEAR_RX_EP_CTR */
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) do { \
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (0xFF7FU & USB_EPREG_MASK); \
@@ -694,7 +724,8 @@
* @param bEpNum Endpoint Number.
* @retval None
*/
-#define PCD_RX_DTOG(USBx, bEpNum) do { \
+#define PCD_RX_DTOG(USBx, bEpNum) \
+ do { \
uint16_t _wEPVal; \
\
_wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
@@ -702,7 +733,8 @@
PCD_SET_ENDPOINT((USBx), (bEpNum), (_wEPVal | USB_EP_CTR_RX | USB_EP_CTR_TX | USB_EP_DTOG_RX)); \
} while(0) /* PCD_RX_DTOG */
-#define PCD_TX_DTOG(USBx, bEpNum) do { \
+#define PCD_TX_DTOG(USBx, bEpNum) \
+ do { \
uint16_t _wEPVal; \
\
_wEPVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK; \
@@ -715,7 +747,8 @@
* @param bEpNum Endpoint Number.
* @retval None
*/
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) do { \
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
@@ -726,7 +759,8 @@
} \
} while(0) /* PCD_CLEAR_RX_DTOG */
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) do { \
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)); \
@@ -744,7 +778,8 @@
* @param bAddr Address.
* @retval None
*/
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) do { \
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum, bAddr) \
+ do { \
uint16_t _wRegVal; \
\
_wRegVal = (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr); \
@@ -770,23 +805,25 @@
* @param wAddr address to be set (must be word aligned).
* @retval None
*/
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) do { \
- __IO uint16_t *_wRegVal; \
- uint32_t _wRegBase = (uint32_t)USBx; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \
- *_wRegVal = ((wAddr) >> 1) << 1; \
-} while(0) /* PCD_SET_EP_TX_ADDRESS */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wAddr) \
+ do { \
+ __IO uint16_t *_wRegVal; \
+ uint32_t _wRegBase = (uint32_t)USBx; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + (((uint32_t)(bEpNum) * 8U) * PMA_ACCESS)); \
+ *_wRegVal = ((wAddr) >> 1) << 1; \
+ } while(0) /* PCD_SET_EP_TX_ADDRESS */
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) do { \
- __IO uint16_t *_wRegVal; \
- uint32_t _wRegBase = (uint32_t)USBx; \
- \
- _wRegBase += (uint32_t)(USBx)->BTABLE; \
- _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \
- *_wRegVal = ((wAddr) >> 1) << 1; \
-} while(0) /* PCD_SET_EP_RX_ADDRESS */
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wAddr) \
+ do { \
+ __IO uint16_t *_wRegVal; \
+ uint32_t _wRegBase = (uint32_t)USBx; \
+ \
+ _wRegBase += (uint32_t)(USBx)->BTABLE; \
+ _wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 4U) * PMA_ACCESS)); \
+ *_wRegVal = ((wAddr) >> 1) << 1; \
+ } while(0) /* PCD_SET_EP_RX_ADDRESS */
/**
* @brief Gets address of the tx/rx buffer.
@@ -804,7 +841,8 @@
* @param wNBlocks no. of Blocks.
* @retval None
*/
-#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) do { \
+#define PCD_CALC_BLK32(pdwReg, wCount, wNBlocks) \
+ do { \
(wNBlocks) = (wCount) >> 5; \
if (((wCount) & 0x1fU) == 0U) \
{ \
@@ -813,7 +851,8 @@
*(pdwReg) = (uint16_t)(((wNBlocks) << 10) | USB_CNTRX_BLSIZE); \
} while(0) /* PCD_CALC_BLK32 */
-#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) do { \
+#define PCD_CALC_BLK2(pdwReg, wCount, wNBlocks) \
+ do { \
(wNBlocks) = (wCount) >> 1; \
if (((wCount) & 0x1U) != 0U) \
{ \
@@ -822,7 +861,8 @@
*(pdwReg) = (uint16_t)((wNBlocks) << 10); \
} while(0) /* PCD_CALC_BLK2 */
-#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) do { \
+#define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \
+ do { \
uint32_t wNBlocks; \
if ((wCount) == 0U) \
{ \
@@ -839,10 +879,11 @@
} \
} while(0) /* PCD_SET_EP_CNT_RX_REG */
-#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) do { \
- uint32_t _wRegBase = (uint32_t)(USBx); \
- __IO uint16_t *pdwReg; \
- \
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum, wCount) \
+ do { \
+ uint32_t _wRegBase = (uint32_t)(USBx); \
+ __IO uint16_t *pdwReg; \
+ \
_wRegBase += (uint32_t)(USBx)->BTABLE; \
pdwReg = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount)); \
@@ -855,23 +896,25 @@
* @param wCount Counter value.
* @retval None
*/
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) do { \
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum, wCount) \
+ do { \
uint32_t _wRegBase = (uint32_t)(USBx); \
__IO uint16_t *_wRegVal; \
\
_wRegBase += (uint32_t)(USBx)->BTABLE; \
_wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS)); \
*_wRegVal = (uint16_t)(wCount); \
-} while(0)
+ } while(0)
-#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) do { \
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum, wCount) \
+ do { \
uint32_t _wRegBase = (uint32_t)(USBx); \
__IO uint16_t *_wRegVal; \
\
_wRegBase += (uint32_t)(USBx)->BTABLE; \
_wRegVal = (__IO uint16_t *)(_wRegBase + 0x400U + ((((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS)); \
PCD_SET_EP_CNT_RX_REG(_wRegVal, (wCount)); \
-} while(0)
+ } while(0)
/**
* @brief gets counter of the tx buffer.
@@ -889,10 +932,13 @@
* @param wBuf0Addr buffer 0 address.
* @retval Counter value
*/
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) do { \
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr) \
+ do { \
PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr)); \
} while(0) /* PCD_SET_EP_DBUF0_ADDR */
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) do { \
+
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr) \
+ do { \
PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr)); \
} while(0) /* PCD_SET_EP_DBUF1_ADDR */
@@ -904,7 +950,8 @@
* @param wBuf1Addr = buffer 1 address.
* @retval None
*/
-#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) do { \
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum, wBuf0Addr, wBuf1Addr) \
+ do { \
PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr)); \
PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr)); \
} while(0) /* PCD_SET_EP_DBUF_ADDR */
@@ -927,7 +974,8 @@
* @param wCount: Counter value
* @retval None
*/
-#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) do { \
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) \
+ do { \
if ((bDir) == 0U) \
/* OUT endpoint */ \
{ \
@@ -943,7 +991,8 @@
} \
} while(0) /* SetEPDblBuf0Count*/
-#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) do { \
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) \
+ do { \
uint32_t _wBase = (uint32_t)(USBx); \
__IO uint16_t *_wEPRegVal; \
\
@@ -964,7 +1013,8 @@
} \
} while(0) /* SetEPDblBuf1Count */
-#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) do { \
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) \
+ do { \
PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
} while(0) /* PCD_SET_EP_DBUF_CNT */
diff --git a/Inc/stm32l4xx_hal_pcd_ex.h b/Inc/stm32l4xx_hal_pcd_ex.h
index c3c7703..ea54722 100644
--- a/Inc/stm32l4xx_hal_pcd_ex.h
+++ b/Inc/stm32l4xx_hal_pcd_ex.h
@@ -53,10 +53,8 @@
#endif /* defined (USB_OTG_FS) */
#if defined (USB)
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
- uint16_t ep_addr,
- uint16_t ep_kind,
- uint32_t pmaadress);
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr,
+ uint16_t ep_kind, uint32_t pmaadress);
#endif /* defined (USB) */
HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
diff --git a/Inc/stm32l4xx_hal_rcc.h b/Inc/stm32l4xx_hal_rcc.h
index 5f18ff1..5d13394 100644
--- a/Inc/stm32l4xx_hal_rcc.h
+++ b/Inc/stm32l4xx_hal_rcc.h
@@ -92,8 +92,10 @@
This parameter can be a value of @ref RCC_HSI_Config */
uint32_t HSICalibrationValue; /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
- This parameter must be a number between Min_Data = 0 and Max_Data = 31 on STM32L47x/STM32L48x devices.
- This parameter must be a number between Min_Data = 0 and Max_Data = 127 on the other devices */
+ This parameter must be a number between Min_Data = 0 and Max_Data = 31 on
+ STM32L43x/STM32L44x/STM32L47x/STM32L48x devices.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 127 on
+ the other devices */
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
@@ -206,9 +208,9 @@
#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
#if defined(RCC_ICSCR_HSITRIM_6)
-#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value 64 on devices other than STM32L47x/STM32L48x */
+#define RCC_HSICALIBRATION_DEFAULT 0x40U /*!< Default HSI calibration trimming value 64 on devices other than STM32L43x/STM32L44x/STM32L47x/STM32L48x */
#else
-#define RCC_HSICALIBRATION_DEFAULT 0x10U /*!< Default HSI calibration trimming value 16 on STM32L47x/STM32L48x devices */
+#define RCC_HSICALIBRATION_DEFAULT 0x10U /*!< Default HSI calibration trimming value 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x devices */
#endif /* RCC_ICSCR_HSITRIM_6 */
/**
* @}
@@ -3945,8 +3947,8 @@
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value
* (default is RCC_HSICALIBRATION_DEFAULT).
- * This parameter must be a number between 0 and 31 on STM32L47x/STM32L48x or
- * between 0 and 127 on other devices.
+ * This parameter must be a number between 0 and 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x
+ * or between 0 and 127 on other devices.
* @retval None
*/
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) \
diff --git a/Inc/stm32l4xx_hal_rcc_ex.h b/Inc/stm32l4xx_hal_rcc_ex.h
index 1bef85d..ebedaf5 100644
--- a/Inc/stm32l4xx_hal_rcc_ex.h
+++ b/Inc/stm32l4xx_hal_rcc_ex.h
@@ -3171,7 +3171,11 @@
#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU))
+#if defined(STM32L412xx) || defined(STM32L422xx)
+#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x7FU))
+#else
#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU))
+#endif /* STM32L412xx || STM32L422xx */
#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \
((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN))
diff --git a/Inc/stm32l4xx_hal_rtc.h b/Inc/stm32l4xx_hal_rtc.h
index c2393ce..fe79fd9 100644
--- a/Inc/stm32l4xx_hal_rtc.h
+++ b/Inc/stm32l4xx_hal_rtc.h
@@ -130,12 +130,9 @@
with [1 Sec / SecondFraction +1] granularity.
This field will be used only by HAL_RTC_GetTime function */
- uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
- This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+ uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
- uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BKP bit
- in CR register to store the operation.
- This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+ uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
} RTC_TimeTypeDef;
/**
@@ -646,6 +643,8 @@
/**
* @brief Add 1 hour (summer time change).
+ * @note This interface is deprecated.
+ * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions
* @param __HANDLE__ specifies the RTC handle.
* @param __BKP__ Backup
* This parameter can be:
@@ -663,6 +662,8 @@
/**
* @brief Subtract 1 hour (winter time change).
+ * @note This interface is deprecated.
+ * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions
* @param __HANDLE__ specifies the RTC handle.
* @param __BKP__ Backup
* This parameter can be:
@@ -920,6 +921,11 @@
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
diff --git a/Inc/stm32l4xx_hal_smartcard.h b/Inc/stm32l4xx_hal_smartcard.h
index b37abc8..63c52b9 100644
--- a/Inc/stm32l4xx_hal_smartcard.h
+++ b/Inc/stm32l4xx_hal_smartcard.h
@@ -161,7 +161,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -178,7 +178,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
diff --git a/Inc/stm32l4xx_hal_smbus.h b/Inc/stm32l4xx_hal_smbus.h
index 3ad0c37..dfb422e 100644
--- a/Inc/stm32l4xx_hal_smbus.h
+++ b/Inc/stm32l4xx_hal_smbus.h
@@ -27,6 +27,7 @@
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal_def.h"
+#include "stm32l4xx_hal_smbus_ex.h"
/** @addtogroup STM32L4xx_HAL_Driver
* @{
diff --git a/Inc/stm32l4xx_hal_smbus_ex.h b/Inc/stm32l4xx_hal_smbus_ex.h
new file mode 100644
index 0000000..702058f
--- /dev/null
+++ b/Inc/stm32l4xx_hal_smbus_ex.h
@@ -0,0 +1,155 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_smbus_ex.h
+ * @author MCD Application Team
+ * @brief Header file of SMBUS HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L4xx_HAL_SMBUS_EX_H
+#define STM32L4xx_HAL_SMBUS_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUSEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUSEx_FastModePlus SMBUS Extended Fast Mode Plus
+ * @{
+ */
+#define SMBUS_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#define SMBUS_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define SMBUS_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
+#define SMBUS_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define SMBUS_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#else
+#define SMBUS_FASTMODEPLUS_PB8 (uint32_t)(0x00000010U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB8 not supported */
+#define SMBUS_FASTMODEPLUS_PB9 (uint32_t)(0x00000012U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus PB9 not supported */
+#endif
+#define SMBUS_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#if defined(SYSCFG_CFGR1_I2C2_FMP)
+#define SMBUS_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#else
+#define SMBUS_FASTMODEPLUS_I2C2 (uint32_t)(0x00000200U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C2 not supported */
+#endif
+#define SMBUS_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#if defined(SYSCFG_CFGR1_I2C4_FMP)
+#define SMBUS_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
+#else
+#define SMBUS_FASTMODEPLUS_I2C4 (uint32_t)(0x00000800U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported */
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMBUSEx_Exported_Macros SMBUS Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUSEx_Exported_Functions_Group3 SMBUS Extended FastModePlus Functions
+ * @{
+ */
+void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Constants SMBUS Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Macro SMBUS Extended Private Macros
+ * @{
+ */
+#define IS_SMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & SMBUS_FMP_NOT_SUPPORTED) != SMBUS_FMP_NOT_SUPPORTED) && \
+ ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6)) == SMBUS_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7)) == SMBUS_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB8)) == SMBUS_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB9)) == SMBUS_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C1)) == SMBUS_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C2)) == SMBUS_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C3)) == SMBUS_FASTMODEPLUS_I2C3) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C4)) == SMBUS_FASTMODEPLUS_I2C4)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Functions SMBUS Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32l4xx_hal_smbus_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32L4xx_HAL_SMBUS_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/stm32l4xx_hal_sram.h b/Inc/stm32l4xx_hal_sram.h
index 47acd0e..410a00f 100644
--- a/Inc/stm32l4xx_hal_sram.h
+++ b/Inc/stm32l4xx_hal_sram.h
@@ -25,7 +25,7 @@
extern "C" {
#endif
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_ll_fmc.h"
@@ -79,9 +79,9 @@
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp Init callback */
void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */
- void (* DmaXferCpltCallback)(DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Complete callback */
- void (* DmaXferErrorCallback)(DMA_HandleTypeDef * hdma); /*!< SRAM DMA Xfer Error callback */
-#endif
+ void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Complete callback */
+ void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Error callback */
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
} SRAM_HandleTypeDef;
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
@@ -101,7 +101,7 @@
*/
typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram);
typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -125,7 +125,7 @@
} while(0)
#else
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
@@ -183,7 +183,7 @@
HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId);
HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId,
pSRAM_DmaCallbackTypeDef pCallback);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
diff --git a/Inc/stm32l4xx_hal_tim.h b/Inc/stm32l4xx_hal_tim.h
index 9d174c0..f1d40b7 100644
--- a/Inc/stm32l4xx_hal_tim.h
+++ b/Inc/stm32l4xx_hal_tim.h
@@ -1050,24 +1050,24 @@
/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
* @{
*/
-#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
/**
* @}
*/
@@ -2032,7 +2032,7 @@
((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\
((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\
(__HANDLE__)->ChannelState[5])
-
+
#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\
@@ -2055,7 +2055,7 @@
((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\
((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\
(__HANDLE__)->ChannelNState[3])
-
+
#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\
((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\
diff --git a/Inc/stm32l4xx_hal_tsc.h b/Inc/stm32l4xx_hal_tsc.h
index 97db287..12f9a7b 100644
--- a/Inc/stm32l4xx_hal_tsc.h
+++ b/Inc/stm32l4xx_hal_tsc.h
@@ -684,6 +684,10 @@
((__VALUE__) == TSC_PG_PRESC_DIV64) || \
((__VALUE__) == TSC_PG_PRESC_DIV128))
+#define IS_TSC_PG_PRESC_VS_CTPL(__PGPSC__, __CTPL__) ((((__PGPSC__) == TSC_PG_PRESC_DIV1) && ((__CTPL__) > TSC_CTPL_2CYCLES)) || \
+ (((__PGPSC__) == TSC_PG_PRESC_DIV2) && ((__CTPL__) > TSC_CTPL_1CYCLE)) || \
+ (((__PGPSC__) > TSC_PG_PRESC_DIV2) && (((__CTPL__) == TSC_CTPL_1CYCLE) || ((__CTPL__) > TSC_CTPL_1CYCLE))))
+
#define IS_TSC_MCV(__VALUE__) (((__VALUE__) == TSC_MCV_255) || \
((__VALUE__) == TSC_MCV_511) || \
((__VALUE__) == TSC_MCV_1023) || \
diff --git a/Inc/stm32l4xx_hal_uart.h b/Inc/stm32l4xx_hal_uart.h
index eeef0c5..b061dcd 100644
--- a/Inc/stm32l4xx_hal_uart.h
+++ b/Inc/stm32l4xx_hal_uart.h
@@ -50,8 +50,9 @@
The baud rate register is computed using the following formula:
LPUART:
=======
- Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate)))
- where lpuart_ker_ck_pres is the UART input clock (divided by a prescaler if applicable)
+ Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate)))
+ where lpuart_ker_ck_pres is the UART input clock
+ (divided by a prescaler if applicable)
UART:
=====
- If oversampling is 16 or in LIN mode,
@@ -82,7 +83,8 @@
or disabled.
This parameter can be a value of @ref UART_Hardware_Flow_Control. */
- uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8).
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled,
+ to achieve higher speed (up to f_PCLK/8).
This parameter can be a value of @ref UART_Over_Sampling. */
uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
@@ -103,7 +105,8 @@
{
uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
Advanced Features may be initialized at the same time .
- This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */
+ This parameter can be a value of
+ @ref UART_Advanced_Features_Initialization_Type. */
uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
This parameter can be a value of @ref UART_Tx_Inv. */
@@ -137,7 +140,8 @@
/**
* @brief HAL UART State definition
- * @note HAL UART State value is a combination of 2 different substates: gState and RxState (see @ref UART_State_Definition).
+ * @note HAL UART State value is a combination of 2 different substates:
+ * gState and RxState (see @ref UART_State_Definition).
* - gState contains UART state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
@@ -148,7 +152,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL UART Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -165,7 +169,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
@@ -190,6 +194,17 @@
} UART_ClockSourceTypeDef;
/**
+ * @brief HAL UART Reception type definition
+ * @note HAL UART Reception type value aims to identify which type of Reception is ongoing.
+ * It is expected to admit following values :
+ * HAL_UART_RECEPTION_STANDARD = 0x00U,
+ * HAL_UART_RECEPTION_TOIDLE = 0x01U,
+ * HAL_UART_RECEPTION_TORTO = 0x02U,
+ * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U,
+ */
+typedef uint32_t HAL_UART_RxTypeTypeDef;
+
+/**
* @brief UART handle Structure definition
*/
typedef struct __UART_HandleTypeDef
@@ -223,6 +238,8 @@
uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */
#endif /*USART_CR1_FIFOEN */
+ __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */
+
void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */
void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */
@@ -234,11 +251,11 @@
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management
- and also related to Tx operations.
- This parameter can be a value of @ref HAL_UART_StateTypeDef */
+ and also related to Tx operations. This parameter
+ can be a value of @ref HAL_UART_StateTypeDef */
- __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations.
- This parameter can be a value of @ref HAL_UART_StateTypeDef */
+ __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This
+ parameter can be a value of @ref HAL_UART_StateTypeDef */
__IO uint32_t ErrorCode; /*!< UART Error code */
@@ -256,6 +273,7 @@
void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */
void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */
#endif /* USART_CR1_FIFOEN */
+ void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
@@ -292,6 +310,7 @@
* @brief HAL UART Callback pointer definition
*/
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
+typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
@@ -318,8 +337,8 @@
#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
Value is allowed for RxState only */
#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
- Not to be used for neither gState nor RxState.
- Value is result of combination (Or) between gState and RxState values */
+ Not to be used for neither gState nor RxState.Value is result
+ of combination (Or) between gState and RxState values */
#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
Value is allowed for gState only */
#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error
@@ -331,16 +350,16 @@
/** @defgroup UART_Error_Definition UART Error Definition
* @{
*/
-#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
-#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */
+#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
-#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
@@ -439,10 +458,14 @@
/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
* @{
*/
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection on start bit */
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection on falling edge */
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection on 0x7F frame detection */
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection on 0x55 frame detection */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection
+ on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection
+ on falling edge */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection
+ on 0x7F frame detection */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection
+ on 0x55 frame detection */
/**
* @}
*/
@@ -604,8 +627,10 @@
/** @defgroup UART_MSB_First UART Advanced Feature MSB First
* @{
*/
-#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */
-#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received
+ first disable */
+#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received
+ first enable */
/**
* @}
*/
@@ -631,7 +656,7 @@
/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
* @{
*/
-#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */
+#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */
/**
* @}
*/
@@ -639,9 +664,10 @@
/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
* @{
*/
-#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */
-#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */
-#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register not empty or RXFIFO is not empty */
+#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */
+#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */
+#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register
+ not empty or RXFIFO is not empty */
/**
* @}
*/
@@ -658,7 +684,8 @@
/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
* @{
*/
-#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB position in CR1 register */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB
+ position in CR1 register */
/**
* @}
*/
@@ -666,7 +693,8 @@
/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
* @{
*/
-#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB position in CR1 register */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB
+ position in CR1 register */
/**
* @}
*/
@@ -751,34 +779,34 @@
* - ZZZZ : Flag position in the ISR register(4bits)
* @{
*/
-#define UART_IT_PE 0x0028U /*!< UART parity error interruption */
-#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */
+#define UART_IT_PE 0x0028U /*!< UART parity error interruption */
+#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */
#if defined(USART_CR1_FIFOEN)
-#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */
+#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */
#endif /* USART_CR1_FIFOEN */
-#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */
-#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */
+#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */
+#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */
#if defined(USART_CR1_FIFOEN)
-#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */
+#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */
#endif /* USART_CR1_FIFOEN */
-#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */
-#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */
-#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */
-#define UART_IT_CM 0x112EU /*!< UART character match interruption */
-#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */
+#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */
+#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */
+#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */
+#define UART_IT_CM 0x112EU /*!< UART character match interruption */
+#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */
#if defined(USART_CR1_FIFOEN)
-#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */
-#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */
-#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */
-#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */
+#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */
+#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */
+#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */
+#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */
#endif /* USART_CR1_FIFOEN */
-#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */
+#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */
-#define UART_IT_ERR 0x0060U /*!< UART error interruption */
+#define UART_IT_ERR 0x0060U /*!< UART error interruption */
-#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */
-#define UART_IT_NE 0x0200U /*!< UART noise error interruption */
-#define UART_IT_FE 0x0100U /*!< UART frame error interruption */
+#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */
+#define UART_IT_NE 0x0200U /*!< UART noise error interruption */
+#define UART_IT_FE 0x0100U /*!< UART frame error interruption */
/**
* @}
*/
@@ -804,6 +832,16 @@
* @}
*/
+/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values
+ * @{
+ */
+#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */
+#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */
+#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */
+#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */
+/**
+ * @}
+ */
/**
* @}
@@ -957,10 +995,15 @@
* @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
-
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 |= (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 |= (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))))
/** @brief Disable the specified UART interrupt.
* @param __HANDLE__ specifies the UART Handle.
@@ -985,9 +1028,15 @@
* @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\
+ ((__INTERRUPT__) & UART_IT_MASK))))
/** @brief Check whether the specified UART interrupt has occurred or not.
* @param __HANDLE__ specifies the UART Handle.
@@ -1038,9 +1087,13 @@
* @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error)
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
-#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ? (__HANDLE__)->Instance->CR1 : \
- (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ? (__HANDLE__)->Instance->CR2 : \
- (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__INTERRUPT__)) & UART_IT_MASK))) != RESET) ? SET : RESET)
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\
+ (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\
+ (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & (1U <<\
+ (((uint16_t)(__INTERRUPT__)) &\
+ UART_IT_MASK))) != RESET) ? SET : RESET)
/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__ specifies the UART Handle.
@@ -1107,8 +1160,9 @@
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * - macro could only be called when corresponding UART instance is disabled
+ * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable
+ * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
@@ -1125,8 +1179,9 @@
* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * - macro could only be called when corresponding UART instance is disabled
+ * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable
+ * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
@@ -1143,8 +1198,9 @@
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * - macro could only be called when corresponding UART instance is disabled
+ * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable
+ * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
@@ -1161,8 +1217,9 @@
* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
* - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
+ * - macro could only be called when corresponding UART instance is disabled
+ * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable
+ * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
@@ -1204,8 +1261,10 @@
* @param __CLOCKPRESCALER__ UART prescaler value.
* @retval Division result
*/
-#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)\
- + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)))
+#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \
+ ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \
+ (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \
+ )
/** @brief BRR division operation to set BRR register in 8-bit oversampling mode.
* @param __PCLK__ UART clock.
@@ -1213,8 +1272,8 @@
* @param __CLOCKPRESCALER__ UART prescaler value.
* @retval Division result
*/
-#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U)\
- + ((__BAUD__)/2U)) / (__BAUD__))
+#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \
+ (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__))
/** @brief BRR division operation to set BRR register in 16-bit oversampling mode.
* @param __PCLK__ UART clock.
@@ -1222,8 +1281,8 @@
* @param __CLOCKPRESCALER__ UART prescaler value.
* @retval Division result
*/
-#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])\
- + ((__BAUD__)/2U)) / (__BAUD__))
+#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \
+ ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__))
#else
/** @brief BRR division operation to set BRR register with LPUART.
@@ -1492,8 +1551,9 @@
* @param __AUTOBAUDRATE__ UART auto Baud rate state.
* @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid)
*/
-#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
- ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \
+ UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
/**
* @brief Ensure that UART DMA enabling or disabling on error setting is valid.
@@ -1574,7 +1634,7 @@
#if defined(USART_PRESC_PRESCALER)
/* Prescaler Table used in BRR computation macros.
- Declared as extern here to allow use of private UART macros, outside of HAL UART fonctions */
+ Declared as extern here to allow use of private UART macros, outside of HAL UART functions */
extern const uint16_t UARTPrescTable[12];
#endif /* USART_PRESC_PRESCALER */
@@ -1602,6 +1662,9 @@
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID,
pUART_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
@@ -1640,6 +1703,8 @@
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
+
/**
* @}
*/
@@ -1685,13 +1750,15 @@
* @{
*/
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
-void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart);
+void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status,
uint32_t Tickstart, uint32_t Timeout);
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
/**
* @}
diff --git a/Inc/stm32l4xx_hal_uart_ex.h b/Inc/stm32l4xx_hal_uart_ex.h
index 5feb206..9ab3741 100644
--- a/Inc/stm32l4xx_hal_uart_ex.h
+++ b/Inc/stm32l4xx_hal_uart_ex.h
@@ -156,8 +156,8 @@
#if defined(USART_CR1_FIFOEN)
void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart);
void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart);
-#endif /* USART_CR1_FIFOEN */
+#endif /* USART_CR1_FIFOEN */
/**
* @}
*/
@@ -185,6 +185,11 @@
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
#endif /* USART_CR1_FIFOEN */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
+
/**
* @}
*/
diff --git a/Inc/stm32l4xx_hal_wwdg.h b/Inc/stm32l4xx_hal_wwdg.h
index 46a5134..2d4c642 100644
--- a/Inc/stm32l4xx_hal_wwdg.h
+++ b/Inc/stm32l4xx_hal_wwdg.h
@@ -56,7 +56,7 @@
uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
- uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interupt is enable or not.
+ uint32_t EWIMode ; /*!< Specifies if WWDG Early Wakeup Interrupt is enable or not.
This parameter can be a value of @ref WWDG_EWI_Mode */
} WWDG_InitTypeDef;
@@ -68,17 +68,17 @@
typedef struct __WWDG_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
{
WWDG_TypeDef *Instance; /*!< Register base address */
WWDG_InitTypeDef Init; /*!< WWDG required parameters */
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
- void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */
+ void (* EwiCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Early WakeUp Interrupt callback */
- void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */
-#endif
+ void (* MspInitCallback)(struct __WWDG_HandleTypeDef *hwwdg); /*!< WWDG Msp Init callback */
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
} WWDG_HandleTypeDef;
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
@@ -87,8 +87,8 @@
*/
typedef enum
{
- HAL_WWDG_EWI_CB_ID = 0x00u, /*!< WWDG EWI callback ID */
- HAL_WWDG_MSPINIT_CB_ID = 0x01u, /*!< WWDG MspInit callback ID */
+ HAL_WWDG_EWI_CB_ID = 0x00U, /*!< WWDG EWI callback ID */
+ HAL_WWDG_MSPINIT_CB_ID = 0x01U, /*!< WWDG MspInit callback ID */
} HAL_WWDG_CallbackIDTypeDef;
/**
@@ -96,7 +96,7 @@
*/
typedef void (*pWWDG_CallbackTypeDef)(WWDG_HandleTypeDef *hppp); /*!< pointer to a WWDG common callback functions */
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -260,9 +260,10 @@
void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID,
+ pWWDG_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID);
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
/**
* @}
diff --git a/Inc/stm32l4xx_ll_adc.h b/Inc/stm32l4xx_ll_adc.h
index 6895250..3c44efb 100644
--- a/Inc/stm32l4xx_ll_adc.h
+++ b/Inc/stm32l4xx_ll_adc.h
@@ -1348,7 +1348,7 @@
/* Delay set to maximum value (refer to device datasheet, */
/* parameter "tADCVREG_STUP"). */
/* Unit: us */
-#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 10UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */
+#define LL_ADC_DELAY_INTERNAL_REGUL_STAB_US ( 20UL) /*!< Delay for ADC stabilization time (ADC voltage regulator start-up time) */
/* Delay for internal voltage reference stabilization time. */
/* Delay set to maximum value (refer to device datasheet, */
diff --git a/Inc/stm32l4xx_ll_crs.h b/Inc/stm32l4xx_ll_crs.h
index ccc4719..13dabf7 100644
--- a/Inc/stm32l4xx_ll_crs.h
+++ b/Inc/stm32l4xx_ll_crs.h
@@ -443,7 +443,7 @@
* CFGR SYNCDIV LL_CRS_ConfigSynchronization\n
* CFGR SYNCSRC LL_CRS_ConfigSynchronization\n
* CFGR SYNCPOL LL_CRS_ConfigSynchronization
- * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63
+ * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise
* @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF
* @param ReloadValue a number between Min_Data = 0 and Max_Data = 255
* @param Settings This parameter can be a combination of the following values:
diff --git a/Inc/stm32l4xx_ll_dma.h b/Inc/stm32l4xx_ll_dma.h
index fea188e..5b3b909 100644
--- a/Inc/stm32l4xx_ll_dma.h
+++ b/Inc/stm32l4xx_ll_dma.h
@@ -76,10 +76,9 @@
* @}
*/
#endif /* DMAMUX1 */
-
-/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
#if defined(DMAMUX1)
+
/** @defgroup DMA_LL_Private_Macros DMA Private Macros
* @{
*/
@@ -106,7 +105,6 @@
*/
#endif /*USE_FULL_LL_DRIVER*/
#endif /* DMAMUX1 */
-
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure
@@ -167,14 +165,13 @@
This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF
This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */
-#if defined(DMAMUX1)
+#if defined(DMAMUX1)
uint32_t PeriphRequest; /*!< Specifies the peripheral request.
This parameter can be a value of @ref DMAMUX_LL_EC_REQUEST
This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */
#else
-
uint32_t PeriphRequest; /*!< Specifies the peripheral request.
This parameter can be a value of @ref DMA_LL_EC_REQUEST
@@ -380,7 +377,6 @@
* @}
*/
#endif /* !defined DMAMUX1 */
-
/**
* @}
*/
@@ -1031,7 +1027,7 @@
/**
* @brief Configure the Source and Destination addresses.
* @note This API must not be called when the DMA channel is enabled.
- * @note Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr).
+ * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr).
* @rmtoll CPAR PA LL_DMA_ConfigAddresses\n
* CMAR MA LL_DMA_ConfigAddresses
* @param DMAx DMAx Instance
@@ -1267,6 +1263,7 @@
* @arg @ref LL_DMAMUX_REQ_GENERATOR2
* @arg @ref LL_DMAMUX_REQ_GENERATOR3
* @arg @ref LL_DMAMUX_REQ_ADC1
+ * @arg @ref LL_DMAMUX_REQ_ADC2
* @arg @ref LL_DMAMUX_REQ_DAC1_CH1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM6_UP
@@ -1352,6 +1349,7 @@
* @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2
* @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3
* @arg @ref LL_DMAMUX_REQ_DCMI
+ * @arg @ref LL_DMAMUX_REQ_DCMI_PSSI
* @arg @ref LL_DMAMUX_REQ_AES_IN
* @arg @ref LL_DMAMUX_REQ_AES_OUT
* @arg @ref LL_DMAMUX_REQ_HASH_IN
@@ -1384,6 +1382,7 @@
* @arg @ref LL_DMAMUX_REQ_GENERATOR2
* @arg @ref LL_DMAMUX_REQ_GENERATOR3
* @arg @ref LL_DMAMUX_REQ_ADC1
+ * @arg @ref LL_DMAMUX_REQ_ADC2
* @arg @ref LL_DMAMUX_REQ_DAC1_CH1
* @arg @ref LL_DMAMUX_REQ_DAC1_CH2
* @arg @ref LL_DMAMUX_REQ_TIM6_UP
@@ -1469,6 +1468,7 @@
* @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT2
* @arg @ref LL_DMAMUX_REQ_DFSDM1_FLT3
* @arg @ref LL_DMAMUX_REQ_DCMI
+ * @arg @ref LL_DMAMUX_REQ_DCMI_PSSI
* @arg @ref LL_DMAMUX_REQ_AES_IN
* @arg @ref LL_DMAMUX_REQ_AES_OUT
* @arg @ref LL_DMAMUX_REQ_HASH_IN
@@ -1478,6 +1478,7 @@
uint32_t dmamux_ccr_offset = ((((uint32_t)DMAx ^ (uint32_t)DMA1) >> 10U) * 7U);
return (READ_BIT((DMAMUX1_Channel0 + Channel + dmamux_ccr_offset)->CCR, DMAMUX_CxCR_DMAREQ_ID));
}
+
#else
/**
* @brief Set DMA request for DMA instance on Channel x.
@@ -1548,8 +1549,8 @@
return (READ_BIT(((DMA_Request_TypeDef *)((uint32_t)((uint32_t)DMAx + DMA_CSELR_OFFSET)))->CSELR,
DMA_CSELR_C1S << ((Channel) * 4U)) >> DMA_POSITION_CSELR_CXS);
}
-#endif /* DMAMUX1 */
+#endif /* DMAMUX1 */
/**
* @}
*/
@@ -1868,6 +1869,10 @@
/**
* @brief Clear Channel 1 global interrupt flag.
+ * @note Do not Clear Channel 1 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC1, LL_DMA_ClearFlag_HT1,
+ LL_DMA_ClearFlag_TE1. bug 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1
* @param DMAx DMAx Instance
* @retval None
@@ -1879,6 +1884,10 @@
/**
* @brief Clear Channel 2 global interrupt flag.
+ * @note Do not Clear Channel 2 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC2, LL_DMA_ClearFlag_HT2,
+ LL_DMA_ClearFlag_TE2. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2
* @param DMAx DMAx Instance
* @retval None
@@ -1890,6 +1899,10 @@
/**
* @brief Clear Channel 3 global interrupt flag.
+ * @note Do not Clear Channel 3 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC3, LL_DMA_ClearFlag_HT3,
+ LL_DMA_ClearFlag_TE3. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3
* @param DMAx DMAx Instance
* @retval None
@@ -1901,6 +1914,10 @@
/**
* @brief Clear Channel 4 global interrupt flag.
+ * @note Do not Clear Channel 4 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC4, LL_DMA_ClearFlag_HT4,
+ LL_DMA_ClearFlag_TE4. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4
* @param DMAx DMAx Instance
* @retval None
@@ -1912,6 +1929,10 @@
/**
* @brief Clear Channel 5 global interrupt flag.
+ * @note Do not Clear Channel 5 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC5, LL_DMA_ClearFlag_HT5,
+ LL_DMA_ClearFlag_TE5. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5
* @param DMAx DMAx Instance
* @retval None
@@ -1923,6 +1944,10 @@
/**
* @brief Clear Channel 6 global interrupt flag.
+ * @note Do not Clear Channel 6 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC6, LL_DMA_ClearFlag_HT6,
+ LL_DMA_ClearFlag_TE6. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6
* @param DMAx DMAx Instance
* @retval None
@@ -1934,6 +1959,10 @@
/**
* @brief Clear Channel 7 global interrupt flag.
+ * @note Do not Clear Channel 7 global interrupt flag when the channel in ON.
+ Instead clear specific flags transfer complete, half transfer & transfer
+ error flag with LL_DMA_ClearFlag_TC7, LL_DMA_ClearFlag_HT7,
+ LL_DMA_ClearFlag_TE7. bug id 2.4.1/2.5.1 in Product Errata Sheet.
* @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7
* @param DMAx DMAx Instance
* @retval None
diff --git a/Inc/stm32l4xx_ll_fmc.h b/Inc/stm32l4xx_ll_fmc.h
index 764fc0d..d362572 100644
--- a/Inc/stm32l4xx_ll_fmc.h
+++ b/Inc/stm32l4xx_ll_fmc.h
@@ -39,58 +39,58 @@
/** @addtogroup FMC_LL_Private_Macros
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \
- ((__BANK__) == FMC_NORSRAM_BANK2) || \
- ((__BANK__) == FMC_NORSRAM_BANK3) || \
- ((__BANK__) == FMC_NORSRAM_BANK4))
+ ((__BANK__) == FMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FMC_NORSRAM_BANK4))
#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
- ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
- ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
- ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
- ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
- ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \
- ((__SIZE__) == FMC_PAGE_SIZE_128) || \
- ((__SIZE__) == FMC_PAGE_SIZE_256) || \
- ((__SIZE__) == FMC_PAGE_SIZE_512) || \
- ((__SIZE__) == FMC_PAGE_SIZE_1024))
+ ((__SIZE__) == FMC_PAGE_SIZE_128) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_256) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_512) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_1024))
#if defined(FMC_BCR1_WFDIS)
#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \
- ((__FIFO__) == FMC_WRITE_FIFO_ENABLE))
+ ((__FIFO__) == FMC_WRITE_FIFO_ENABLE))
#endif /* FMC_BCR1_WFDIS */
#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
- ((__MODE__) == FMC_ACCESS_MODE_B) || \
- ((__MODE__) == FMC_ACCESS_MODE_C) || \
- ((__MODE__) == FMC_ACCESS_MODE_D))
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
#if defined(FMC_BCRx_NBLSET)
#define IS_FMC_NBL_SETUPTIME(__NBL__) (((__NBL__) == FMC_NBL_SETUPTIME_0) || \
- ((__NBL__) == FMC_NBL_SETUPTIME_1) || \
- ((__NBL__) == FMC_NBL_SETUPTIME_2) || \
- ((__NBL__) == FMC_NBL_SETUPTIME_3))
+ ((__NBL__) == FMC_NBL_SETUPTIME_1) || \
+ ((__NBL__) == FMC_NBL_SETUPTIME_2) || \
+ ((__NBL__) == FMC_NBL_SETUPTIME_3))
#endif /* FMC_BCRx_NBLSET */
#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
- ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
- ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
- ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
- ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
- ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
- ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
- ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
- ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
- ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+ ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
@@ -108,18 +108,18 @@
#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3)
#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_WAIT_FEATURE_DISABLE) || \
- ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE))
+ ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE))
#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_8) || \
- ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16))
+ ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16))
#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \
- ((__STATE__) == FMC_NAND_ECC_ENABLE))
+ ((__STATE__) == FMC_NAND_ECC_ENABLE))
#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
- ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
- ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
- ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
- ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
- ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U)
#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U)
#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U)
@@ -140,7 +140,7 @@
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
#endif /* FMC_BANK1 */
@@ -148,7 +148,7 @@
#define FMC_NAND_TypeDef FMC_Bank3_TypeDef
#endif /* FMC_BANK3 */
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
#define FMC_NORSRAM_DEVICE FMC_Bank1_R
#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E_R
#endif /* FMC_BANK1 */
@@ -156,84 +156,84 @@
#define FMC_NAND_DEVICE FMC_Bank3_R
#endif /* FMC_BANK3 */
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/**
* @brief FMC NORSRAM Configuration Structure definition
*/
typedef struct
{
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
- This parameter can be a value of @ref FMC_NORSRAM_Bank */
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
multiplexed on the data bus or not.
- This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
uint32_t MemoryType; /*!< Specifies the type of external memory attached to
the corresponding memory device.
- This parameter can be a value of @ref FMC_Memory_Type */
+ This parameter can be a value of @ref FMC_Memory_Type */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
- This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
valid only with synchronous burst Flash memories.
- This parameter can be a value of @ref FMC_Burst_Access_Mode */
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
the Flash memory in burst mode.
- This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
clock cycle before the wait state or during the wait state,
valid only when accessing memories in burst mode.
- This parameter can be a value of @ref FMC_Wait_Timing */
+ This parameter can be a value of @ref FMC_Wait_Timing */
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
- This parameter can be a value of @ref FMC_Write_Operation */
+ This parameter can be a value of @ref FMC_Write_Operation */
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
signal, valid for Flash memory access in burst mode.
- This parameter can be a value of @ref FMC_Wait_Signal */
+ This parameter can be a value of @ref FMC_Wait_Signal */
uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
- This parameter can be a value of @ref FMC_Extended_Mode */
+ This parameter can be a value of @ref FMC_Extended_Mode */
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
valid only with asynchronous Flash memories.
- This parameter can be a value of @ref FMC_AsynchronousWait */
+ This parameter can be a value of @ref FMC_AsynchronousWait */
uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
- This parameter can be a value of @ref FMC_Write_Burst */
+ This parameter can be a value of @ref FMC_Write_Burst */
uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
- This parameter is only enabled through the FMC_BCR1 register, and don't care
- through FMC_BCR2..4 registers.
- This parameter can be a value of @ref FMC_Continous_Clock */
+ This parameter is only enabled through the FMC_BCR1 register,
+ and don't care through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
- This parameter is only enabled through the FMC_BCR1 register, and don't care
- through FMC_BCR2..4 registers.
- This parameter can be a value of @ref FMC_Write_FIFO */
+ This parameter is only enabled through the FMC_BCR1 register,
+ and don't care through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO */
uint32_t PageSize; /*!< Specifies the memory page size.
- This parameter can be a value of @ref FMC_Page_Size */
+ This parameter can be a value of @ref FMC_Page_Size */
uint32_t NBLSetupTime; /*!< Specifies the NBL setup timing clock cycle number
- This parameter can be a value of @ref FMC_Byte_Lane */
+ This parameter can be a value of @ref FMC_Byte_Lane */
#if defined(FMC_PCSCNTR_CSCOUNT)
- FunctionalState MaxChipSelectPulse; /*!< Enables or disables the maximum chip select pulse management in this NSBank
- for PSRAM refresh.
- This parameter can be set to ENABLE or DISABLE */
+ FunctionalState MaxChipSelectPulse; /*!< Enables or disables the maximum chip select pulse management in this
+ NSBank for PSRAM refresh.
+ This parameter can be set to ENABLE or DISABLE */
- uint32_t MaxChipSelectPulseTime; /*!< Specifies the maximum chip select pulse time in FMC_CLK cycles for synchronous
- accesses and in HCLK cycles for asynchronous accesses,
+ uint32_t MaxChipSelectPulseTime; /*!< Specifies the maximum chip select pulse time in FMC_CLK cycles for
+ synchronous accesses and in HCLK cycles for asynchronous accesses,
valid only if MaxChipSelectPulse is ENABLE.
This parameter can be a value between Min_Data = 1 and Max_Data = 65535.
- @note: This parameter is common to all NSBank. */
+ @note: This parameter is common to all NSBank. */
#endif
-}FMC_NORSRAM_InitTypeDef;
+} FMC_NORSRAM_InitTypeDef;
/**
* @brief FMC NORSRAM Timing parameters structure definition
@@ -243,45 +243,46 @@
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address setup time.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
- @note This parameter is not used with synchronous NOR Flash memories. */
+ @note This parameter is not used with synchronous NOR Flash memories. */
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address hold time.
This parameter can be a value between Min_Data = 1 and Max_Data = 15.
- @note This parameter is not used with synchronous NOR Flash memories. */
+ @note This parameter is not used with synchronous NOR Flash memories. */
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data setup time.
This parameter can be a value between Min_Data = 1 and Max_Data = 255.
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
- NOR Flash memories. */
+ NOR Flash memories. */
uint32_t DataHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data hold time.
This parameter can be a value between Min_Data = 0 and Max_Data = 3.
- @note This parameter is used for used in asynchronous accesses. */
+ @note This parameter is used for used in asynchronous accesses. */
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
the duration of the bus turnaround.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
- @note This parameter is only used for multiplexed NOR Flash memories. */
+ @note This parameter is only used for multiplexed NOR Flash memories. */
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
- HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and
+ Max_Data = 16.
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
- accesses. */
+ accesses. */
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
to the memory before getting the first data.
The parameter value depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
- with synchronous burst mode enable */
+ - It may assume a value between Min_Data = 2 and Max_Data = 17
+ in NOR Flash memories with synchronous burst mode enable */
uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
- This parameter can be a value of @ref FMC_Access_Mode */
-}FMC_NORSRAM_TimingTypeDef;
+ This parameter can be a value of @ref FMC_Access_Mode */
+} FMC_NORSRAM_TimingTypeDef;
#endif /* FMC_BANK1 */
#if defined(FMC_BANK3)
@@ -291,19 +292,19 @@
typedef struct
{
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
- This parameter can be a value of @ref FMC_NAND_Bank */
+ This parameter can be a value of @ref FMC_NAND_Bank */
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
- This parameter can be any value of @ref FMC_Wait_feature */
+ This parameter can be any value of @ref FMC_Wait_feature */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
- This parameter can be any value of @ref FMC_NAND_Data_Width */
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
uint32_t EccComputation; /*!< Enables or disables the ECC computation.
- This parameter can be any value of @ref FMC_ECC */
+ This parameter can be any value of @ref FMC_ECC */
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
- This parameter can be any value of @ref FMC_ECC_Page_Size */
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
@@ -312,7 +313,7 @@
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
-}FMC_NAND_InitTypeDef;
+} FMC_NAND_InitTypeDef;
#endif
#if defined(FMC_BANK3)
@@ -345,7 +346,7 @@
write access to common/Attribute or I/O memory space (depending
on the memory space timing to be configured).
This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
-}FMC_NAND_PCC_TimingTypeDef;
+} FMC_NAND_PCC_TimingTypeDef;
#endif /* FMC_BANK3 */
@@ -357,7 +358,7 @@
/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
* @{
@@ -366,10 +367,10 @@
/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
* @{
*/
-#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
-#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
-#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
-#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+#define FMC_NORSRAM_BANK1 (0x00000000U)
+#define FMC_NORSRAM_BANK2 (0x00000002U)
+#define FMC_NORSRAM_BANK3 (0x00000004U)
+#define FMC_NORSRAM_BANK4 (0x00000006U)
/**
* @}
*/
@@ -377,8 +378,8 @@
/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
* @{
*/
-#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
-#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+#define FMC_DATA_ADDRESS_MUX_DISABLE (0x00000000U)
+#define FMC_DATA_ADDRESS_MUX_ENABLE (0x00000002U)
/**
* @}
*/
@@ -386,9 +387,9 @@
/** @defgroup FMC_Memory_Type FMC Memory Type
* @{
*/
-#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
-#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
-#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+#define FMC_MEMORY_TYPE_SRAM (0x00000000U)
+#define FMC_MEMORY_TYPE_PSRAM (0x00000004U)
+#define FMC_MEMORY_TYPE_NOR (0x00000008U)
/**
* @}
*/
@@ -396,9 +397,9 @@
/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
* @{
*/
-#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
-#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
-#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 (0x00000000U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 (0x00000010U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 (0x00000020U)
/**
* @}
*/
@@ -406,8 +407,8 @@
/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
* @{
*/
-#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
-#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE (0x00000040U)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE (0x00000000U)
/**
* @}
*/
@@ -415,8 +416,8 @@
/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
* @{
*/
-#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
-#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+#define FMC_BURST_ACCESS_MODE_DISABLE (0x00000000U)
+#define FMC_BURST_ACCESS_MODE_ENABLE (0x00000100U)
/**
* @}
*/
@@ -424,8 +425,8 @@
/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
* @{
*/
-#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
-#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+#define FMC_WAIT_SIGNAL_POLARITY_LOW (0x00000000U)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH (0x00000200U)
/**
* @}
*/
@@ -433,8 +434,8 @@
/** @defgroup FMC_Wait_Timing FMC Wait Timing
* @{
*/
-#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
-#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+#define FMC_WAIT_TIMING_BEFORE_WS (0x00000000U)
+#define FMC_WAIT_TIMING_DURING_WS (0x00000800U)
/**
* @}
*/
@@ -442,8 +443,8 @@
/** @defgroup FMC_Write_Operation FMC Write Operation
* @{
*/
-#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
-#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+#define FMC_WRITE_OPERATION_DISABLE (0x00000000U)
+#define FMC_WRITE_OPERATION_ENABLE (0x00001000U)
/**
* @}
*/
@@ -451,8 +452,8 @@
/** @defgroup FMC_Wait_Signal FMC Wait Signal
* @{
*/
-#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
-#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+#define FMC_WAIT_SIGNAL_DISABLE (0x00000000U)
+#define FMC_WAIT_SIGNAL_ENABLE (0x00002000U)
/**
* @}
*/
@@ -460,8 +461,8 @@
/** @defgroup FMC_Extended_Mode FMC Extended Mode
* @{
*/
-#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
-#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+#define FMC_EXTENDED_MODE_DISABLE (0x00000000U)
+#define FMC_EXTENDED_MODE_ENABLE (0x00004000U)
/**
* @}
*/
@@ -469,8 +470,8 @@
/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
* @{
*/
-#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
-#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE (0x00000000U)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE (0x00008000U)
/**
* @}
*/
@@ -478,12 +479,12 @@
/** @defgroup FMC_Page_Size FMC Page Size
* @{
*/
-#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000)
-#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCRx_CPSIZE_0)
-#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCRx_CPSIZE_1)
-#define FMC_PAGE_SIZE_512 ((uint32_t)(FMC_BCRx_CPSIZE_0\
- | FMC_BCRx_CPSIZE_1))
-#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCRx_CPSIZE_2)
+#define FMC_PAGE_SIZE_NONE (0x00000000U)
+#define FMC_PAGE_SIZE_128 FMC_BCRx_CPSIZE_0
+#define FMC_PAGE_SIZE_256 FMC_BCRx_CPSIZE_1
+#define FMC_PAGE_SIZE_512 (FMC_BCRx_CPSIZE_0\
+ | FMC_BCRx_CPSIZE_1)
+#define FMC_PAGE_SIZE_1024 FMC_BCRx_CPSIZE_2
/**
* @}
*/
@@ -491,8 +492,8 @@
/** @defgroup FMC_Write_Burst FMC Write Burst
* @{
*/
-#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
-#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+#define FMC_WRITE_BURST_DISABLE (0x00000000U)
+#define FMC_WRITE_BURST_ENABLE (0x00080000U)
/**
* @}
*/
@@ -500,8 +501,8 @@
/** @defgroup FMC_Continous_Clock FMC Continuous Clock
* @{
*/
-#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
-#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY (0x00000000U)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC (0x00100000U)
/**
* @}
*/
@@ -509,19 +510,19 @@
/** @defgroup FMC_Write_FIFO FMC Write FIFO
* @{
*/
-#define FMC_WRITE_FIFO_DISABLE ((uint32_t)FMC_BCR1_WFDIS)
-#define FMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_FIFO_DISABLE FMC_BCR1_WFDIS
+#define FMC_WRITE_FIFO_ENABLE (0x00000000U)
/**
* @}
*/
/** @defgroup FMC_Access_Mode FMC Access Mode
* @{
-*/
-#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
-#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
-#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
-#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+ */
+#define FMC_ACCESS_MODE_A (0x00000000U)
+#define FMC_ACCESS_MODE_B (0x10000000U)
+#define FMC_ACCESS_MODE_C (0x20000000U)
+#define FMC_ACCESS_MODE_D (0x30000000U)
/**
* @}
*/
@@ -529,10 +530,10 @@
/** @defgroup FMC_Byte_Lane FMC Byte Lane(NBL) Setup
* @{
*/
-#define FMC_NBL_SETUPTIME_0 ((uint32_t)0x00000000)
-#define FMC_NBL_SETUPTIME_1 ((uint32_t)0x00400000)
-#define FMC_NBL_SETUPTIME_2 ((uint32_t)0x00800000)
-#define FMC_NBL_SETUPTIME_3 ((uint32_t)0x00C00000)
+#define FMC_NBL_SETUPTIME_0 (0x00000000U)
+#define FMC_NBL_SETUPTIME_1 (0x00400000U)
+#define FMC_NBL_SETUPTIME_2 (0x00800000U)
+#define FMC_NBL_SETUPTIME_3 (0x00C00000U)
/**
* @}
*/
@@ -550,7 +551,7 @@
/** @defgroup FMC_NAND_Bank FMC NAND Bank
* @{
*/
-#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+#define FMC_NAND_BANK3 (0x00000100U)
/**
* @}
*/
@@ -558,8 +559,8 @@
/** @defgroup FMC_Wait_feature FMC Wait feature
* @{
*/
-#define FMC_NAND_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
-#define FMC_NAND_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+#define FMC_NAND_WAIT_FEATURE_DISABLE (0x00000000U)
+#define FMC_NAND_WAIT_FEATURE_ENABLE (0x00000002U)
/**
* @}
*/
@@ -567,7 +568,7 @@
/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
* @{
*/
-#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+#define FMC_PCR_MEMORY_TYPE_NAND (0x00000008U)
/**
* @}
*/
@@ -575,8 +576,8 @@
/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
* @{
*/
-#define FMC_NAND_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
-#define FMC_NAND_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_NAND_MEM_BUS_WIDTH_8 (0x00000000U)
+#define FMC_NAND_MEM_BUS_WIDTH_16 (0x00000010U)
/**
* @}
*/
@@ -584,8 +585,8 @@
/** @defgroup FMC_ECC FMC ECC
* @{
*/
-#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
-#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+#define FMC_NAND_ECC_DISABLE (0x00000000U)
+#define FMC_NAND_ECC_ENABLE (0x00000040U)
/**
* @}
*/
@@ -593,12 +594,12 @@
/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
* @{
*/
-#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
-#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
-#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
-#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
-#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
-#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE (0x00000000U)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE (0x00020000U)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE (0x00040000U)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE (0x00060000U)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE (0x00080000U)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE (0x000A0000U)
/**
* @}
*/
@@ -613,9 +614,9 @@
* @{
*/
#if defined(FMC_BANK3)
-#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
-#define FMC_IT_LEVEL ((uint32_t)0x00000010)
-#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FMC_IT_RISING_EDGE (0x00000008U)
+#define FMC_IT_LEVEL (0x00000010U)
+#define FMC_IT_FALLING_EDGE (0x00000020U)
#endif /* FMC_BANK3 */
/**
* @}
@@ -625,10 +626,10 @@
* @{
*/
#if defined(FMC_BANK3)
-#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
-#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
-#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
-#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define FMC_FLAG_RISING_EDGE (0x00000001U)
+#define FMC_FLAG_LEVEL (0x00000002U)
+#define FMC_FLAG_FALLING_EDGE (0x00000004U)
+#define FMC_FLAG_FEMPT (0x00000040U)
#endif /* FMC_BANK3 */
/**
* @}
@@ -646,7 +647,7 @@
/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
* @brief macros to handle NOR device enable/disable and read/write operations
* @{
@@ -659,7 +660,7 @@
* @retval None
*/
#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\
- |= FMC_BCRx_MBKEN)
+ |= FMC_BCRx_MBKEN)
/**
* @brief Disable the NORSRAM device access.
@@ -668,7 +669,7 @@
* @retval None
*/
#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)]\
- &= ~FMC_BCRx_MBKEN)
+ &= ~FMC_BCRx_MBKEN)
/**
* @}
@@ -777,7 +778,7 @@
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @defgroup FMC_LL_NORSRAM NOR SRAM
* @{
*/
@@ -785,13 +786,14 @@
* @{
*/
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_InitTypeDef *Init);
+ FMC_NORSRAM_InitTypeDef *Init);
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+ FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device,
- FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+ FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
+ uint32_t ExtendedMode);
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+ FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
/**
* @}
*/
@@ -818,9 +820,9 @@
*/
HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device,
- FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+ FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device,
- FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+ FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
/**
* @}
@@ -832,7 +834,7 @@
HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank,
- uint32_t Timeout);
+ uint32_t Timeout);
/**
* @}
*/
diff --git a/Inc/stm32l4xx_ll_lpuart.h b/Inc/stm32l4xx_ll_lpuart.h
index 2fd3435..82be58a 100644
--- a/Inc/stm32l4xx_ll_lpuart.h
+++ b/Inc/stm32l4xx_ll_lpuart.h
@@ -103,37 +103,44 @@
uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate.
This parameter can be a value of @ref LPUART_LL_EC_PRESCALER.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetPrescaler().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetPrescaler().*/
#endif /* USART_PRESC_PRESCALER */
uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetBaudRate().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetBaudRate().*/
uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetDataWidth().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetDataWidth().*/
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref LPUART_LL_EC_STOPBITS.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetStopBitsLength().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetStopBitsLength().*/
uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref LPUART_LL_EC_PARITY.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetParity().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetParity().*/
uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled.
This parameter can be a value of @ref LPUART_LL_EC_DIRECTION.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetTransferDirection().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetTransferDirection().*/
uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL.
- This feature can be modified afterwards using unitary function @ref LL_LPUART_SetHWFlowCtrl().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPUART_SetHWFlowCtrl().*/
} LL_LPUART_InitTypeDef;
@@ -298,18 +305,18 @@
/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler
* @{
*/
-#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not devided */
-#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock devided by 2 */
-#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock devided by 4 */
-#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 6 */
-#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock devided by 8 */
-#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 10 */
-#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock devided by 12 */
-#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 16 */
-#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock devided by 32 */
-#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 64 */
-#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock devided by 128 */
-#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock devided by 256 */
+#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */
+#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */
+#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */
+#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */
+#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */
+#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */
+#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */
+#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */
+#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */
+#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */
+#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */
+#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */
/**
* @}
*/
@@ -477,8 +484,9 @@
* @retval LPUARTDIV value to be used for BRR register filling
*/
#if defined(USART_PRESC_PRESCALER)
-#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)])) * LPUART_LPUARTDIV_FREQ_MUL)\
- + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK)
+#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\
+ ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\
+ * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK)
#else
#define __LL_LPUART_DIV(__PERIPHCLK__, __BAUDRATE__) (uint32_t)(((((uint64_t)(__PERIPHCLK__)*LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__))\
& LPUART_BRR_MASK)
@@ -669,7 +677,8 @@
*/
__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold)
{
- MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | (RXThreshold << USART_CR3_RXFTCFG_Pos));
+ MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \
+ (RXThreshold << USART_CR3_RXFTCFG_Pos));
}
#endif /* USART_CR1_FIFOEN */
@@ -1432,9 +1441,15 @@
#endif /* USART_PRESC_PRESCALER */
{
#if defined(USART_PRESC_PRESCALER)
- LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate);
+ if (BaudRate != 0U)
+ {
+ LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate);
+ }
#else
- LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, BaudRate);
+ if (BaudRate != 0U)
+ {
+ LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, BaudRate);
+ }
#endif /* USART_PRESC_PRESCALER */
}
diff --git a/Inc/stm32l4xx_ll_opamp.h b/Inc/stm32l4xx_ll_opamp.h
index 933f2c2..af5e226 100644
--- a/Inc/stm32l4xx_ll_opamp.h
+++ b/Inc/stm32l4xx_ll_opamp.h
@@ -153,8 +153,11 @@
/** @defgroup OPAMP_LL_EC_POWERMODE OPAMP power mode
* @{
*/
-#define LL_OPAMP_POWERMODE_NORMAL (OPAMP_POWERMODE_OTR_REGOFFSET) /*!< OPAMP power mode normal */
+#define LL_OPAMP_POWERMODE_NORMALPOWER (OPAMP_POWERMODE_OTR_REGOFFSET) /*!< OPAMP power mode normal */
#define LL_OPAMP_POWERMODE_LOWPOWER (OPAMP_POWERMODE_LPOTR_REGOFFSET | OPAMP_CSR_OPALPM) /*!< OPAMP power mode low-power */
+
+#define LL_OPAMP_POWERMODE_NORMAL LL_OPAMP_POWERMODE_NORMALPOWER /*!< OPAMP power mode normal - Old Naming for compatibility */
+
/**
* @}
*/
diff --git a/Inc/stm32l4xx_ll_rcc.h b/Inc/stm32l4xx_ll_rcc.h
index 5f998ba..fa04e5c 100644
--- a/Inc/stm32l4xx_ll_rcc.h
+++ b/Inc/stm32l4xx_ll_rcc.h
@@ -2181,10 +2181,10 @@
/**
* @brief Set HSI Calibration trimming
* @note user-programmable trimming value that is added to the HSICAL
- * @note Default value is 16 on STM32L47x/STM32L48x or 64 on other devices,
+ * @note Default value is 16 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or 64 on other devices,
* which, when added to the HSICAL value, should trim the HSI to 16 MHz +/- 1 %
* @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming
- * @param Value Between Min_Data = 0 and Max_Data = 31 on STM32L47x/STM32L48x or
+ * @param Value Between Min_Data = 0 and Max_Data = 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or
* between Min_Data = 0 and Max_Data = 127 on other devices
* @retval None
*/
@@ -2196,7 +2196,7 @@
/**
* @brief Get HSI Calibration trimming
* @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming
- * @retval Between Min_Data = 0 and Max_Data = 31 on STM32L47x/STM32L48x or
+ * @retval Between Min_Data = 0 and Max_Data = 31 on STM32L43x/STM32L44x/STM32L47x/STM32L48x or
* between Min_Data = 0 and Max_Data = 127 on other devices
*/
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
diff --git a/Inc/stm32l4xx_ll_system.h b/Inc/stm32l4xx_ll_system.h
index e0bf66b..f153225 100644
--- a/Inc/stm32l4xx_ll_system.h
+++ b/Inc/stm32l4xx_ll_system.h
@@ -63,7 +63,7 @@
* @brief Power-down in Run mode Flash key
*/
#define FLASH_PDKEY1 0x04152637U /*!< Flash power down key1 */
-#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1
+#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1
to unlock the RUN_PD bit in FLASH_ACR */
/**
@@ -96,9 +96,9 @@
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
* @{
*/
-#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
+#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
and Flash Bank2 mapped at 0x08080000 (and aliased at 0x00080000) */
-#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_FB_MODE /*!< Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
+#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_FB_MODE /*!< Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
and Flash Bank1 mapped at 0x08080000 (and aliased at 0x00080000) */
/**
* @}
@@ -176,14 +176,14 @@
/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
* @{
*/
-#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal
+#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal
with Break Input of TIM1/8/15/16/17 */
-#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection
- with TIM1/8/15/16/17 Break Input
+#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection
+ with TIM1/8/15/16/17 Break Input
and also the PVDE and PLS bits of the Power Control Interface */
-#define LL_SYSCFG_TIMBREAK_SRAM2_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal
+#define LL_SYSCFG_TIMBREAK_SRAM2_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal
with Break Input of TIM1/8/15/16/17 */
-#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4
+#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4
with Break Input of TIM1/15/16/17 */
/**
* @}
@@ -819,7 +819,7 @@
* @brief Enable SRAM2 Erase (starts a hardware SRAM2 erase operation. This bit is
* automatically cleared at the end of the SRAM2 erase operation.)
* @note This bit is write-protected: setting this bit is possible only after the
- * correct key sequence is written in the SYSCFG_SKR register as described in
+ * correct key sequence is written in the SYSCFG_SKR register as described in
* the Reference Manual.
* @rmtoll SYSCFG_SCSR SRAM2ER LL_SYSCFG_EnableSRAM2Erase
* @retval None
diff --git a/Inc/stm32l4xx_ll_tim.h b/Inc/stm32l4xx_ll_tim.h
index 0b9bce2..e1602ac 100644
--- a/Inc/stm32l4xx_ll_tim.h
+++ b/Inc/stm32l4xx_ll_tim.h
@@ -591,8 +591,8 @@
/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
* @{
*/
-#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */
-#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
/**
* @}
*/
@@ -1583,7 +1583,16 @@
*/
__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx)
{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS));
+ uint32_t counter_mode;
+
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS));
+
+ if (counter_mode == 0U)
+ {
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+ }
+
+ return counter_mode;
}
/**
@@ -2038,8 +2047,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel]));
MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]),
(Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]);
@@ -2083,8 +2092,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
}
@@ -2122,8 +2131,8 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
}
@@ -2156,7 +2165,7 @@
*/
__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]);
}
@@ -2188,7 +2197,7 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]);
}
@@ -2225,7 +2234,7 @@
*/
__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]);
}
@@ -2257,7 +2266,7 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]);
}
@@ -2282,8 +2291,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2308,8 +2317,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2334,9 +2343,9 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel];
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel];
return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
}
@@ -2360,8 +2369,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2385,8 +2394,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2410,9 +2419,9 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel];
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel];
return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
}
@@ -2439,8 +2448,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2466,8 +2475,8 @@
*/
__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
}
@@ -2495,9 +2504,9 @@
*/
__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel];
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel];
return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
}
@@ -2766,8 +2775,8 @@
*/
__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]);
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
@@ -2794,8 +2803,8 @@
*/
__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]);
}
@@ -2818,8 +2827,8 @@
*/
__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
}
@@ -2844,8 +2853,8 @@
*/
__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]);
}
@@ -2869,8 +2878,8 @@
*/
__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
}
@@ -2907,8 +2916,8 @@
*/
__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]);
}
@@ -2944,8 +2953,8 @@
*/
__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
- const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
}
@@ -2973,7 +2982,7 @@
*/
__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
ICPolarity << SHIFT_TAB_CCxP[iChannel]);
}
@@ -3001,7 +3010,7 @@
*/
__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel)
{
- uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >>
SHIFT_TAB_CCxP[iChannel]);
}
@@ -3391,7 +3400,6 @@
*/
__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource)
{
-
MODIFY_REG(TIMx->OR2, TIMx_OR2_ETRSEL, ETRSource);
}
@@ -3650,7 +3658,7 @@
*/
__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source)
{
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
SET_BIT(*pReg, Source);
}
@@ -3679,7 +3687,7 @@
*/
__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source)
{
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
CLEAR_BIT(*pReg, Source);
}
@@ -3709,7 +3717,7 @@
__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source,
uint32_t Polarity)
{
- __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
MODIFY_REG(*pReg, (TIMx_OR2_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE));
}
/**
diff --git a/Inc/stm32l4xx_ll_usb.h b/Inc/stm32l4xx_ll_usb.h
index d90980b..571f0c4 100644
--- a/Inc/stm32l4xx_ll_usb.h
+++ b/Inc/stm32l4xx_ll_usb.h
@@ -81,7 +81,7 @@
} USB_OTG_HCStateTypeDef;
/**
- * @brief USB OTG Initialization Structure definition
+ * @brief USB Instance Initialization Structure definition
*/
typedef struct
{
@@ -94,14 +94,14 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
+ This parameter can be any value of @ref USB_Core_Speed */
uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY_ */
+ This parameter can be any value of @ref USB_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
@@ -116,6 +116,7 @@
uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
} USB_OTG_CfgTypeDef;
typedef struct
@@ -185,6 +186,8 @@
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+ uint32_t XferSize; /*!< OTG Channel transfer size. */
+
uint32_t xfer_len; /*!< Current transfer length. */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
@@ -197,13 +200,13 @@
uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
- uint32_t ErrCnt; /*!< Host channel error count.*/
+ uint32_t ErrCnt; /*!< Host channel error count. */
USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
- This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
} USB_OTG_HCTypeDef;
#endif /* defined (USB_OTG_FS) */
@@ -388,7 +391,7 @@
#define EP_MPS_64 0U
#define EP_MPS_32 1U
#define EP_MPS_16 2U
-#define EP_MPS_8 3U
+#define EP_MPS_8 3U
/**
* @}
*/
@@ -478,10 +481,10 @@
/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
* @{
*/
-#define EP_MPS_64 0U
-#define EP_MPS_32 1U
-#define EP_MPS_16 2U
-#define EP_MPS_8 3U
+#define EP_MPS_64 0U
+#define EP_MPS_32 1U
+#define EP_MPS_16 2U
+#define EP_MPS_8 3U
/**
* @}
*/
@@ -506,14 +509,14 @@
* @}
*/
-#define BTABLE_ADDRESS 0x000U
+#define BTABLE_ADDRESS 0x000U
#define PMA_ACCESS 1U
#endif /* defined (USB) */
#if defined (USB_OTG_FS)
-#define EP_ADDR_MSK 0xFU
+#define EP_ADDR_MSK 0xFU
#endif /* defined (USB_OTG_FS) */
#if defined (USB)
-#define EP_ADDR_MSK 0x7U
+#define EP_ADDR_MSK 0x7U
#endif /* defined (USB) */
/**
* @}
@@ -554,7 +557,9 @@
HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src,
+ uint8_t ch_ep_num, uint16_t len);
+
void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
@@ -582,7 +587,9 @@
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
uint8_t epnum, uint8_t dev_address, uint8_t speed,
uint8_t ep_type, uint16_t mps);
-HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx,
+ USB_OTG_HCTypeDef *hc);
+
uint32_t USB_HC_ReadInterrupt(USB_OTG_GlobalTypeDef *USBx);
HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx, uint8_t hc_num);
HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num);
@@ -600,29 +607,39 @@
HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed);
HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx);
HAL_StatusTypeDef USB_FlushTxFifo(USB_TypeDef *USBx, uint32_t num);
+
+#if defined (HAL_PCD_MODULE_ENABLED)
HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
-void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
+#endif
+
HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address);
HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx);
HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx);
HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);
HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);
+HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src,
+ uint8_t ch_ep_num, uint16_t len);
+
+void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
+
uint32_t USB_ReadInterrupts(USB_TypeDef *USBx);
uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx);
uint32_t USB_ReadDevOutEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx);
uint32_t USB_ReadDevInEPInterrupt(USB_TypeDef *USBx, uint8_t epnum);
void USB_ClearInterrupts(USB_TypeDef *USBx, uint32_t interrupt);
-
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
-void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
-void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+
+void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf,
+ uint16_t wPMABufAddr, uint16_t wNBytes);
+
+void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf,
+ uint16_t wPMABufAddr, uint16_t wNBytes);
#endif /* defined (USB) */
/**
* @}
diff --git a/README.md b/README.md
index 549ef2a..a4ee9f6 100644
--- a/README.md
+++ b/README.md
@@ -4,16 +4,16 @@
**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
-**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series.
- * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product
- * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio
- * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series
- * A consistent set of middlewares components such as RTOS, USB, FatFS, Graphics, STM32_TouchSensing_Library ...
- * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series
+**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series.
+ * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
+ * The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio.
+ * The BSP drivers of each evaluation, demonstration or nucleo board provided for this STM32 series.
+ * A consistent set of middleware components such as RTOS, USB, FatFS, graphics, touch sensing library...
+ * A full set of software projects (basic examples, applications, and demonstrations) for each board provided for this STM32 series.
Two models of publication are proposed for the STM32Cube embedded software:
- * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series)
- * The **MCU component** : progressively from November 2019, each STM32Cube software module being part of the STM32Cube MCU Package, will be delivered as an individual repo, allowing the user to select and get only the required software functions.
+ * The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
+ * The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions.
## Description
@@ -38,10 +38,11 @@
HAL Driver L4 | CMSIS Device L4 | CMSIS Core | Was delivered in the full MCU package
------------- | --------------- | ---------- | -------------------------------------
-Tag v1.10.0 | Tag v1.5.1 | Tag v5.4.0_cm4 | Tag v1.14.0 (and following, if any, till next new tag)
-Tag v1.11.0 | Tag v1.6.0 | Tag v5.4.0_cm4 | Tag v1.15.0 (and following, if any, till next new tag)
-Tag v1.11.1 | Tag v1.6.1 | Tag v5.4.0_cm4 | Tag v1.15.1 (and following, if any, till next new tag)
-Tag v1.12.0 | Tag v1.7.0 | Tag v5.6.0_cm4 | Tag v1.16.0 (and following, if any, till next new tag)
+Tag v1.10.0 | Tag v1.5.1 | Tag v5.4.0_cm4 | Tag v1.14.0 (and following, if any, till next HAL tag)
+Tag v1.11.0 | Tag v1.6.0 | Tag v5.4.0_cm4 | Tag v1.15.0 (and following, if any, till next HAL tag)
+Tag v1.11.1 | Tag v1.6.1 | Tag v5.4.0_cm4 | Tag v1.15.1 (and following, if any, till next HAL tag)
+Tag v1.12.0 | Tag v1.7.0 | Tag v5.6.0_cm4 | Tag v1.16.0 (and following, if any, till next HAL tag)
+Tag v1.13.0 | Tag v1.7.1 | Tag v5.6.0_cm4 | Tag v1.17.0 (and following, if any, till next HAL tag)
Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32l4xx_hal_driver/blob/master/Release_Notes.html).
diff --git a/Release_Notes.html b/Release_Notes.html
index 1ea2f96..2a83f2a 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -11,24 +11,22 @@
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
- <link rel="stylesheet" href="_htmresc/mini-st.css" />
+ <link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
+ <link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
-<div class="card fluid">
-<div class="sectione dark">
<center>
-<h1 id="release-notes-for-stm32l4xx-hal-drivers"><small>Release Notes for</small> <mark>STM32L4xx HAL Drivers</mark></h1>
+<h1 id="release-notes-for">Release Notes for</h1>
+<h1 id="stm32l4xx-hal-drivers"><mark>STM32L4xx HAL Drivers</mark></h1>
<p>Copyright © 2017 STMicroelectronics<br />
</p>
-<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a>
+<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo_2020.png" alt="ST logo" /></a>
</center>
-</div>
-</div>
<h1 id="license">License</h1>
<p>Licensed by ST under BSD 3-Clause license (the "License"). You may not use this package except in compliance with the License. You may obtain a copy of the License at:</p>
<p><a href="https://opensource.org/licenses/BSD-3-Clause">https://opensource.org/licenses/BSD-3-Clause</a></p>
@@ -46,19 +44,205 @@
<div class="col-sm-12 col-lg-8">
<h1 id="update-history">Update History</h1>
<div class="collapse">
-<input type="checkbox" id="collapse-section28" checked aria-hidden="true"> <label for="collapse-section28" aria-hidden="true">V1.12.0 / 26-June-2020</label>
+<input type="checkbox" id="collapse-section29" checked aria-hidden="true"> <label for="collapse-section29" aria-hidden="true">V1.13.0 / 11-February-2021</label>
<div>
<h2 id="main-changes">Main Changes</h2>
<ul>
-<li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
-<li>Update of <strong>HAL OSPI</strong> driver introducing <strong>compatibility break</strong> with previous versions</li>
+<li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections
+<ul>
+<li>Update of HAL SMBUS driver to introduce fast mode and fast mode plus
+<ul>
+<li>Add extension files stm32l4xx_hal_smbus_ex.h/.c for new APIs:
+<ul>
+<li><em>HAL_SMBUSEx_EnableFastModePlus()</em></li>
+<li><em>HAL_SMBUSEx_DisableFastModePlus()</em></li>
+</ul></li>
+</ul></li>
+<li>Update of HAL UART driver introducing enhanced reception services
+<ul>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle()</em></li>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT()</em></li>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA()</em></li>
+</ul></li>
+</ul></li>
</ul>
<h2 id="contents">Contents</h2>
<h3 id="halll-generic-updates"><strong>HAL/LL generic</strong> updates</h3>
<ul>
+<li>stm32l4xx_hal_timebase_tim_template.c
+<ul>
+<li>Update Tick priority handling in <em>HAL_Init_Tick()</em></li>
+</ul></li>
+</ul>
+<p><br />
+</p>
+<h3 id="hal-drivers-updates"><strong>HAL Drivers</strong> updates</h3>
+<ul>
+<li><strong>HAL ADC</strong> driver
+<ul>
+<li>Fix delay computation of the local variable wait_loop_index at low system core clock frequency</li>
+<li>Fix to avoid Error state returned by IRQ handler in case of injected conversion + IT mode + trigger timer</li>
+<li>Update <em>HAL_ADC_DeInit()</em> description and behaviour to call <em>MspDeInit()</em> only when all ADC instances sharing the same common ADC instance are disabled</li>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption</li>
+<li>Extend internal regulator stabilization time from 10us to 20us</li>
+</ul></li>
+<li><strong>HAL COMP</strong> driver
+<ul>
+<li>Fix delay computation of the local variable wait_loop_index at low system core clock frequency</li>
+</ul></li>
+<li><strong>HAL EXTI</strong> driver
+<ul>
+<li>Replace macro parameter __LINE__ by __EXTI_LINE__ to avoid conflicts with standard C usage</li>
+</ul></li>
+<li><strong>HAL GPIO</strong> driver
+<ul>
+<li>Add AF6 missing definitions : GPIO_AF6_OCTOSPIM_P1 / GPIO_AF6_OCTOSPIM_P2</li>
+</ul></li>
+<li><strong>HAL IWDG</strong> driver
+<ul>
+<li>Update definition of HAL_IWDG_DEFAULT_TIMEOUT to avoid issue with the watchdog init procedure</li>
+</ul></li>
+<li><strong>HAL LPTIM</strong> driver
+<ul>
+<li>Update external clock configuration to cover all ClockSource/CounterSource combinations</li>
+</ul></li>
+<li><strong>HAL NAND</strong> driver
+<ul>
+<li>Update address calculation in <em>HAL_NAND_Read_SpareArea_16b()</em> and <em>HAL_NAND_Write_SpareArea_16b()</em></li>
+<li>Fix issue in the access to NAND 8-bits memories with 16-bits APIs</li>
+</ul></li>
+<li><strong>HAL OPAMP</strong> driver
+<ul>
+<li>Align OPAMP PowerMode definitions with others series</li>
+</ul></li>
+<li><strong>HAL RCC</strong> driver
+<ul>
+<li>Update IS_RCC_CRS_HSI48CALIBRATION() definition to have specific maximum value for STM32L412xx/L422xx devices</li>
+<li>Update RCC_HSICALIBRATION_DEFAULT definition depending on devices</li>
+</ul></li>
+<li><strong>HAL RTC</strong> driver
+<ul>
+<li>Update the description of <em>HAL_RTC_SetTime()</em> to mention that the DayLightSaving attribute of sTime should not be used</li>
+<li>Add Daylight Saving Time service</li>
+<li>Update <em>HAL_RTC_DeactivateAlarm()</em> to fix issue during Alarm Autoclear</li>
+<li>Update <em>HAL_RTC_SetTime()</em> to add back assert_param() functions checking daylight saving parameters</li>
+</ul></li>
+<li><strong>HAL SDMMC</strong> driver
+<ul>
+<li>Update driver to enable interrupt after treating the single write command or multiple write command</li>
+<li>Update eMMC High Speed Mode management</li>
+</ul></li>
+<li><strong>HAL SMSBUS</strong> driver
+<ul>
+<li>Implementation of fast mode and fast mode plus
+<ul>
+<li>Add extension files stm32l4xx_hal_smbus_ex.h/.c for new APIs:
+<ul>
+<li><em>HAL_SMBUSEx_EnableFastModePlus()</em></li>
+<li><em>HAL_SMBUSEx_DisableFastModePlus()</em></li>
+</ul></li>
+</ul></li>
+</ul></li>
+<li><strong>HAL SPI</strong> driver
+<ul>
+<li>Fix <em>SPI_WaitFifoStateUntilTimeout()</em></li>
+</ul></li>
+<li><strong>HAL TIM</strong> driver
+<ul>
+<li>Update callback function invoked upon Half DMA transfer completion</li>
+<li>Fix in <em>HAL_TIM_OnePulse_Start()</em> to handle OutputChannel parameter</li>
+<li>Update <em>HAL_TIM_IC_Start_DMA()</em> to ensure correct behavior of counter value latch delay at high frequency</li>
+</ul></li>
+<li><strong>HAL TSC</strong> driver
+<ul>
+<li>Add assertion when fordidden configurations of bit value PGPSC versus bit value CTPL are requested by user</li>
+</ul></li>
+<li><strong>HAL UART</strong> driver
+<ul>
+<li>Remove FifoMode use in UART_SetConfig()</li>
+<li>Add a HAL UART service to enable RTO interrupt</li>
+<li>Implementation of HAL UART enhanced reception services (ReceptionToIdle)
+<ul>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle()</em></li>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT()</em></li>
+<li><em>HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA()</em></li>
+</ul></li>
+</ul></li>
+<li><strong>HAL UART/USART/IRDA/SMARTCARD</strong> drivers
+<ul>
+<li>Fix typos in State definition description</li>
+<li>Update parameter array to be always declared as static const</li>
+</ul></li>
+<li><strong>HAL SMARTCARD</strong> driver
+<ul>
+<li>Remove FifoMode use in SMARTCARD_SetConfig()</li>
+</ul></li>
+<li><strong>HAL USB </strong> driver
+<ul>
+<li>Fix regression in HAL USB double buffer mode</li>
+</ul></li>
+<li><strong>HAL WWDG</strong> driver
+<ul>
+<li>Update HAL WWDG driver description</li>
+</ul></li>
+</ul>
+<p><br />
+</p>
+<h3 id="ll-drivers-updates"><strong>LL Drivers</strong> updates</h3>
+<ul>
+<li><strong>LL DMA</strong> driver
+<ul>
+<li>Update LL_DMA_ClearFlag_GIx() to add text informing user not to clear GIx when channel is ON</li>
+</ul></li>
+<li><strong>LL FMC</strong> driver
+<ul>
+<li>Fix compilation warning with gcc -Wpedantic compiler option</li>
+</ul></li>
+<li><strong>LL GPIO</strong> driver
+<ul>
+<li>Update GPIO configuration order to avoid a glitch on the bus-lines when using CAN</li>
+</ul></li>
+<li><strong>LL OPAMP</strong> driver
+<ul>
+<li>Align OPAMP PowerMode definitions with others series</li>
+</ul></li>
+<li><strong>LL RCC</strong> driver
+<ul>
+<li>Update RCC private functions declaration to static</li>
+</ul></li>
+<li><strong>LL SPI</strong> driver
+<ul>
+<li>Update <em>LL_SPI_Init()</em> to et Rx FIFO to Quarter (1 Byte) in case of 8 Bits mode</li>
+</ul></li>
+<li><strong>LL TIM</strong> driver
+<ul>
+<li>Update return value of <em>LL_TIM_GetCounterMode()</em></li>
+<li>Update LL_TIM_ONEPULSEMODE_SINGLE and LL_TIM_ONEPULSEMODE_REPETITIVE defines description</li>
+</ul></li>
+<li><strong>LL USART</strong> driver
+<ul>
+<li>Update <em>LL_USART_ClockInit()</em> to allow the configuration of clock phase and polarity even if CR2_CLKEN is cleared</li>
+<li>Remove useless IS_LL_USART_BRR_MAX() macro</li>
+</ul></li>
+</ul>
+<p><br />
+</p>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section28" aria-hidden="true"> <label for="collapse-section28" aria-hidden="true">V1.12.0 / 26-June-2020</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
+<li>Maintenance release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
+<li>Update of <strong>HAL OSPI</strong> driver introducing <strong>compatibility break</strong> with previous versions</li>
+</ul>
+<h2 id="contents-1">Contents</h2>
+<h3 id="halll-generic-updates-1"><strong>HAL/LL generic</strong> updates</h3>
+<ul>
<li>Remove the use of keyword register in HAL/LL drivers</li>
</ul>
-<h3 id="hal-drivers-updates"><strong>HAL Drivers</strong> updates</h3>
+<h3 id="hal-drivers-updates-1"><strong>HAL Drivers</strong> updates</h3>
<ul>
<li><strong>HAL CAN</strong> driver
<ul>
@@ -188,7 +372,7 @@
<li>Update WWDG clock frequency, min, and max timeout values in header description</li>
</ul></li>
</ul>
-<h3 id="ll-drivers-updates"><strong>LL Drivers</strong> updates</h3>
+<h3 id="ll-drivers-updates-1"><strong>LL Drivers</strong> updates</h3>
<ul>
<li><strong>LL FMC</strong> driver
<ul>
@@ -218,11 +402,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section27" aria-hidden="true"> <label for="collapse-section27" aria-hidden="true">V1.11.1 / 07-February-2020</label>
<div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-2">Main Changes</h2>
<ul>
<li>Patch release of <strong>HAL and Low Layer</strong> drivers to include latest corrections</li>
</ul>
-<h2 id="contents-1">Contents</h2>
+<h2 id="contents-2">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><strong>HAL GPIO</strong> driver
@@ -265,7 +449,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section26" aria-hidden="true"> <label for="collapse-section26" aria-hidden="true">V1.11.0 / 22-November-2019</label>
<div>
-<h2 id="main-changes-2">Main Changes</h2>
+<h2 id="main-changes-3">Main Changes</h2>
<ul>
<li>Release of <strong>HAL and Low Layer</strong> drivers to add support of <strong>STM32L4P5xx/STM32L4Q5xx</strong> devices
<ul>
@@ -275,7 +459,7 @@
</li>
<li>Correction of several issues applicable to other devices</li>
</ul>
-<h2 id="contents-2">Contents</h2>
+<h2 id="contents-3">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><strong>HAL</strong> driver
@@ -615,11 +799,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section22" aria-hidden="true"> <label for="collapse-section22" aria-hidden="true">V1.10.0 / 03-April-2019</label>
<div>
-<h2 id="main-changes-3">Main Changes</h2>
+<h2 id="main-changes-4">Main Changes</h2>
<ul>
<li>Delivery of the new HAL MMC driver</li>
</ul>
-<h2 id="contents-3">Contents</h2>
+<h2 id="contents-4">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><strong>HAL ADC</strong> driver
@@ -907,13 +1091,13 @@
<div class="collapse">
<input type="checkbox" id="collapse-section21" aria-hidden="true"> <label for="collapse-section21" aria-hidden="true">V1.9.0 / 27-July-2018</label>
<div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
<ul>
<li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L412xx/STM32L422xx</strong></li>
<li>Superset features device STM32L422xx API User Manual available (STM32L422xx_User_Manual.chm) </li>
<li>MISRA C:2012 corrections</li>
</ul>
-<h2 id="contents-4">Contents</h2>
+<h2 id="contents-5">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<p>MISRA C:2012 corrections listed hereafter are applicable to LL driver as well.</p>
<ul>
@@ -1099,7 +1283,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section19" aria-hidden="true"> <label for="collapse-section19" aria-hidden="true">V1.8.3 / 22-May-2018</label>
<div>
-<h2 id="main-changes-5">Main Changes</h2>
+<h2 id="main-changes-6">Main Changes</h2>
<p>Maintenance Release of <strong>HAL and Low Layer drivers</strong></p>
<p><strong>Add support of HAL callback registration feature</strong></p>
<ul>
@@ -1109,7 +1293,7 @@
<li><p>Once enabled, the user application may resort to HAL_PPP_RegisterCallback() to register specific callback function(s) and unregister it(them) with HAL_PPP_UnRegisterCallback().</p></li>
</ul>
<p>MISRA C:2012 corrections</p>
-<h2 id="contents-5">Contents</h2>
+<h2 id="contents-6">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL generic</strong> driver</p>
@@ -1457,11 +1641,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.8.2 / 22-December-2017</label>
<div>
-<h2 id="main-changes-6">Main Changes</h2>
+<h2 id="main-changes-7">Main Changes</h2>
<ul>
<li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
</ul>
-<h2 id="contents-6">Contents</h2>
+<h2 id="contents-7">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><strong>HAL CAN</strong> driver</li>
@@ -1539,11 +1723,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.8.1 / 13-October-2017</label>
<div>
-<h2 id="main-changes-7">Main Changes</h2>
+<h2 id="main-changes-8">Main Changes</h2>
<ul>
<li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
</ul>
-<h2 id="contents-7">Contents</h2>
+<h2 id="contents-8">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL generic</strong> driver</p>
@@ -1621,7 +1805,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.8.0 / 25-August-2017</label>
<div>
-<h2 id="main-changes-8">Main Changes</h2>
+<h2 id="main-changes-9">Main Changes</h2>
<ul>
<li><p>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L4R5xx/STM32L4R7xx/STM32L4R9xx/STM32L4S5xx/STM32L4S7xx/STM32L4S9xx</strong> devices</p></li>
<li><p>New OctoSPI, DSI, LTDC, GFXMMU peripherals supported in <strong>new HAL OSPI, HAL DSI, HAL LTDC</strong> and <strong>HAL GFXMMU</strong> drivers</p></li>
@@ -1878,11 +2062,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">V1.7.2 / 16-June-2017</label>
<div>
-<h2 id="main-changes-9">Main Changes</h2>
+<h2 id="main-changes-10">Main Changes</h2>
<ul>
<li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
</ul>
-<h2 id="contents-8">Contents</h2>
+<h2 id="contents-9">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL CAN</strong> driver</p>
@@ -1934,11 +2118,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">V1.7.1 / 21-April-2017</label>
<div>
-<h2 id="main-changes-10">Main Changes</h2>
+<h2 id="main-changes-11">Main Changes</h2>
<ul>
<li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
</ul>
-<h2 id="contents-9">Contents</h2>
+<h2 id="contents-10">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL generic</strong> driver</p>
@@ -1978,7 +2162,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">V1.7.0 / 17-February-2017</label>
<div>
-<h2 id="main-changes-11">Main Changes</h2>
+<h2 id="main-changes-12">Main Changes</h2>
<ul>
<li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L496xx/STM32L4A6xx</strong> devices</li>
<li>New DCMI, DMA2D, HASH peripherals supported in <strong>new HAL DCMI, HAL & LL DMA2D and HAL HASH</strong> drivers</li>
@@ -1987,7 +2171,7 @@
<li>Superset features device STM32L4A6xx API User Manual available (STM32L4A6xx_User_Manual.chm) <br />
</li>
</ul>
-<h2 id="contents-10">Contents</h2>
+<h2 id="contents-11">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><strong>HAL DCMI</strong> driver <strong>(NEW)</strong>: stm32l4xx_hal_dcmi.h/.c files</li>
@@ -2087,12 +2271,12 @@
<div class="collapse">
<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V1.6.0 / 28-October-2016</label>
<div>
-<h2 id="main-changes-12">Main Changes</h2>
+<h2 id="main-changes-13">Main Changes</h2>
<ul>
<li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L451xx/STM32L452xx/STM32L462xx</strong> devices</li>
<li>Superset features device STM32L462xx API User Manual available (STM32L462xx_User_Manual.chm)</li>
</ul>
-<h2 id="contents-11">Contents</h2>
+<h2 id="contents-12">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL CRYP</strong> driver</p>
@@ -2152,7 +2336,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V1.5.2 / 12-September-2016</label>
<div>
-<h2 id="contents-12">Contents</h2>
+<h2 id="contents-13">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL ADC</strong> driver</p>
@@ -2244,7 +2428,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V1.5.1 / 31-May-2016</label>
<div>
-<h2 id="contents-13">Contents</h2>
+<h2 id="contents-14">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL ADC</strong> driver</p>
@@ -2272,11 +2456,11 @@
<div class="collapse">
<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V1.5.0 / 29-April-2016</label>
<div>
-<h2 id="main-changes-13">Main Changes</h2>
+<h2 id="main-changes-14">Main Changes</h2>
<ul>
<li>Maintenance Release of <strong>HAL and Low Layer drivers</strong></li>
</ul>
-<h2 id="contents-14">Contents</h2>
+<h2 id="contents-15">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<p>Enhance HAL delay and timebase implementation</p>
<ul>
@@ -2522,7 +2706,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V1.4.0 / 26-February-2016</label>
<div>
-<h2 id="main-changes-14">Main Changes</h2>
+<h2 id="main-changes-15">Main Changes</h2>
<ul>
<li>Release of <strong>HAL and Low Layer drivers</strong> to add support of <strong>STM32L431xx/STM32L432xx/STM32L433xx/STM32L442xx/STM32L443xx</strong> devices</li>
<li><strong>Low Layer driver initialization/de-initialization APIs</strong> applicable to all STM32L4xx devices</li>
@@ -2530,7 +2714,7 @@
<li>Superset features device STM32L443xx API User Manual available (STM32L443xx_User_Manual.chm) <br />
</li>
</ul>
-<h2 id="contents-15">Contents</h2>
+<h2 id="contents-16">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL</strong> generic update</p>
@@ -2594,7 +2778,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section15" aria-hidden="true"> <label for="collapse-section15" aria-hidden="true">V1.3.0 / 29-January-2016</label>
<div>
-<h2 id="main-changes-15">Main Changes</h2>
+<h2 id="main-changes-16">Main Changes</h2>
<ul>
<li><strong>New Low Layer driver initialization/de-initialization APIs</strong>
<ul>
@@ -2607,7 +2791,7 @@
</ul></li>
<li>Fix "parameter unused" GCC compilation warnings on __weak functions</li>
</ul>
-<h2 id="contents-16">Contents</h2>
+<h2 id="contents-17">Contents</h2>
<p><strong><span class="underline"><span style="font-size: 10pt; font-family: Verdana; color: black;">HAL drivers changes</span></span></strong></p>
<ul>
<li><p><strong>HAL generic</strong> update</p>
@@ -2755,7 +2939,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section16" aria-hidden="true"> <label for="collapse-section16" aria-hidden="true">V1.2.0 / 25-November-2015</label>
<div>
-<h2 id="main-changes-16">Main Changes</h2>
+<h2 id="main-changes-17">Main Changes</h2>
<ul>
<li><strong>HAL generic</strong> update
<ul>
@@ -2812,7 +2996,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section17" aria-hidden="true"> <label for="collapse-section17" aria-hidden="true">V1.1.1 / 16-October-2015</label>
<div>
-<h2 id="main-changes-17">Main Changes</h2>
+<h2 id="main-changes-18">Main Changes</h2>
<ul>
<li><p><strong>HAL generic</strong> update</p>
<ul>
@@ -2842,7 +3026,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section20" aria-hidden="true"> <label for="collapse-section20" aria-hidden="true">V1.1.0 / 26-September-2015</label>
<div>
-<h2 id="main-changes-18">Main Changes</h2>
+<h2 id="main-changes-19">Main Changes</h2>
<p><strong>Add Low Layer drivers allowing performance and footprint optimization</strong></p>
<ul>
<li>Low Layer drivers APIs provide register level programming: they require deep knowledge of peripherals described in STM32L4x6 Reference Manual</li>
@@ -2850,7 +3034,7 @@
</p></li>
<li><p>Low Layer drivers APIs are implemented as static inline function in new Inc/stm32l4xx_ll_ppp.h files for PPP peripherals, there is no configuration file and each stm32l4xx_ll_ppp.h file must be included in user code.</p></li>
</ul>
-<h2 id="contents-17">Contents</h2>
+<h2 id="contents-18">Contents</h2>
<ul>
<li><p><strong>HAL ADC</strong> update</p>
<ul>
@@ -2915,7 +3099,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section18" aria-hidden="true"> <label for="collapse-section18" aria-hidden="true">V1.0.0 / 26-June-2015</label>
<div>
-<h2 id="main-changes-19">Main Changes</h2>
+<h2 id="main-changes-20">Main Changes</h2>
<ul>
<li>First official release of <strong>STM32L4xx HAL Drivers</strong> for <strong>STM32L471xx/STM32L475xx/STM32L476xx/STM32L485xx</strong> and <strong>STM32L486xx</strong> devices</li>
</ul>
diff --git a/Src/stm32l4xx_hal.c b/Src/stm32l4xx_hal.c
index ce8ab1b..be40072 100644
--- a/Src/stm32l4xx_hal.c
+++ b/Src/stm32l4xx_hal.c
@@ -52,7 +52,7 @@
* @brief STM32L4xx HAL Driver version number
*/
#define STM32L4XX_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
-#define STM32L4XX_HAL_VERSION_SUB1 (0x0CU) /*!< [23:16] sub1 version */
+#define STM32L4XX_HAL_VERSION_SUB1 (0x0DU) /*!< [23:16] sub1 version */
#define STM32L4XX_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define STM32L4XX_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define STM32L4XX_HAL_VERSION ((STM32L4XX_HAL_VERSION_MAIN << 24U)\
diff --git a/Src/stm32l4xx_hal_adc.c b/Src/stm32l4xx_hal_adc.c
index 227515e..a86b3e9 100644
--- a/Src/stm32l4xx_hal_adc.c
+++ b/Src/stm32l4xx_hal_adc.c
@@ -499,7 +499,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -857,31 +857,28 @@
HAL_ADC_ConfigChannel() or HAL_ADCEx_InjectedConfigChannel() )
*/
ADC_CLEAR_COMMON_CONTROL_REGISTER(hadc);
- }
- /* DeInit the low level hardware.
-
- For example:
- __HAL_RCC_ADC_FORCE_RESET();
- __HAL_RCC_ADC_RELEASE_RESET();
- __HAL_RCC_ADC_CLK_DISABLE();
-
- Keep in mind that all ADCs use the same clock: disabling
- the clock will reset all ADCs.
-
- */
+ /* ========== Hard reset ADC peripheral ========== */
+ /* Performs a global reset of the entire ADC peripherals instances */
+ /* sharing the same common ADC instance: ADC state is forced to */
+ /* a similar state as after device power-on. */
+ /* Note: A possible implementation is to add RCC bus reset of ADC */
+ /* (for example, using macro */
+ /* __HAL_RCC_ADC..._FORCE_RESET()/..._RELEASE_RESET()/..._CLK_DISABLE()) */
+ /* in function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
- if (hadc->MspDeInitCallback == NULL)
- {
- hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */
- }
+ if (hadc->MspDeInitCallback == NULL)
+ {
+ hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */
+ }
- /* DeInit the low level hardware */
- hadc->MspDeInitCallback(hadc);
+ /* DeInit the low level hardware */
+ hadc->MspDeInitCallback(hadc);
#else
- /* DeInit the low level hardware */
- HAL_ADC_MspDeInit(hadc);
+ /* DeInit the low level hardware */
+ HAL_ADC_MspDeInit(hadc);
#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+ }
/* Set ADC error code to none */
ADC_CLEAR_ERRORCODE(hadc);
@@ -1483,13 +1480,17 @@
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
{
- /* Update ADC state machine to timeout */
- SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
}
}
}
@@ -1599,13 +1600,17 @@
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
{
- /* Update ADC state machine to timeout */
- SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL)
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
}
}
}
@@ -2400,44 +2405,46 @@
/* group having no further conversion upcoming (same conditions as */
/* regular group interruption disabling above), */
/* and if injected scan sequence is completed. */
- if ((tmp_adc_inj_is_trigger_source_sw_start != 0UL) ||
- ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) &&
- ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) &&
- (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL))))
+ if (tmp_adc_inj_is_trigger_source_sw_start != 0UL)
{
- /* If End of Sequence is reached, disable interrupts */
- if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS))
+ if ((READ_BIT(tmp_cfgr, ADC_CFGR_JAUTO) == 0UL) ||
+ ((tmp_adc_reg_is_trigger_source_sw_start != 0UL) &&
+ (READ_BIT(tmp_cfgr, ADC_CFGR_CONT) == 0UL)))
{
- /* Particular case if injected contexts queue is enabled: */
- /* when the last context has been fully processed, JSQR is reset */
- /* by the hardware. Even if no injected conversion is planned to come */
- /* (queue empty, triggers are ignored), it can start again */
- /* immediately after setting a new context (JADSTART is still set). */
- /* Therefore, state of HAL ADC injected group is kept to busy. */
- if (READ_BIT(tmp_cfgr, ADC_CFGR_JQM) == 0UL)
+ /* If End of Sequence is reached, disable interrupts */
+ if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOS))
{
- /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */
- /* JADSTART==0 (no conversion on going) */
- if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
+ /* Particular case if injected contexts queue is enabled: */
+ /* when the last context has been fully processed, JSQR is reset */
+ /* by the hardware. Even if no injected conversion is planned to come */
+ /* (queue empty, triggers are ignored), it can start again */
+ /* immediately after setting a new context (JADSTART is still set). */
+ /* Therefore, state of HAL ADC injected group is kept to busy. */
+ if (READ_BIT(tmp_cfgr, ADC_CFGR_JQM) == 0UL)
{
- /* Disable ADC end of sequence conversion interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC | ADC_IT_JEOS);
-
- /* Set ADC state */
- CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
-
- if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL)
+ /* Allowed to modify bits ADC_IT_JEOC/ADC_IT_JEOS only if bit */
+ /* JADSTART==0 (no conversion on going) */
+ if (LL_ADC_INJ_IsConversionOngoing(hadc->Instance) == 0UL)
{
- SET_BIT(hadc->State, HAL_ADC_STATE_READY);
- }
- }
- else
- {
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* Disable ADC end of sequence conversion interrupt */
+ __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC | ADC_IT_JEOS);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC state */
+ CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
+
+ if ((hadc->State & HAL_ADC_STATE_REG_BUSY) == 0UL)
+ {
+ SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+ }
+ }
+ else
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ }
}
}
}
@@ -2888,7 +2895,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -3356,13 +3363,17 @@
{
if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->CR & tmp_ADC_CR_ADSTART_JADSTART) != 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
@@ -3425,13 +3436,17 @@
if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
}
@@ -3485,13 +3500,17 @@
{
if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
}
diff --git a/Src/stm32l4xx_hal_adc_ex.c b/Src/stm32l4xx_hal_adc_ex.c
index 9676a71..14f979f 100644
--- a/Src/stm32l4xx_hal_adc_ex.c
+++ b/Src/stm32l4xx_hal_adc_ex.c
@@ -516,13 +516,17 @@
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
{
- /* Update ADC state machine to timeout */
- SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
}
}
}
@@ -878,6 +882,10 @@
/* Process locked */
__HAL_LOCK(hadc);
+ /* Temporary handle minimum initialization */
+ __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
+ ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+
/* Set a temporary handle of the ADC slave associated to the ADC master */
ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
@@ -993,6 +1001,10 @@
/* Disable ADC peripheral if conversions are effectively stopped */
if (tmp_hal_status == HAL_OK)
{
+ /* Temporary handle minimum initialization */
+ __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
+ ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+
/* Set a temporary handle of the ADC slave associated to the ADC master */
ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
@@ -1020,13 +1032,20 @@
{
if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+ if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
+ || (tmphadcSlave_conversion_on_going == 1UL)
+ )
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
@@ -1477,6 +1496,10 @@
/* Clear HAL_ADC_STATE_REG_BUSY bit */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+ /* Temporary handle minimum initialization */
+ __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
+ ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+
/* Set a temporary handle of the ADC slave associated to the ADC master */
ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
@@ -1504,13 +1527,20 @@
{
if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
+ if ((LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 1UL)
+ || (tmphadcSlave_conversion_on_going == 1UL)
+ )
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
tmphadcSlave_conversion_on_going = LL_ADC_REG_IsConversionOngoing((&tmphadcSlave)->Instance);
@@ -2018,7 +2048,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (((SystemCoreClock / (100000UL * 2UL)) + 1UL) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -2077,7 +2107,7 @@
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
ADC_Common_TypeDef *tmpADC_Common;
- ADC_HandleTypeDef tmphadcSlave;
+ ADC_HandleTypeDef tmphadcSlave;
uint32_t tmphadcSlave_conversion_on_going;
/* Check the parameters */
@@ -2092,6 +2122,10 @@
/* Process locked */
__HAL_LOCK(hadc);
+ /* Temporary handle minimum initialization */
+ __HAL_ADC_RESET_HANDLE_STATE(&tmphadcSlave);
+ ADC_CLEAR_ERRORCODE(&tmphadcSlave);
+
ADC_MULTI_SLAVE(hadc, &tmphadcSlave);
if (tmphadcSlave.Instance == NULL)
diff --git a/Src/stm32l4xx_hal_comp.c b/Src/stm32l4xx_hal_comp.c
index a174a97..bfb7dae 100644
--- a/Src/stm32l4xx_hal_comp.c
+++ b/Src/stm32l4xx_hal_comp.c
@@ -393,7 +393,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while(wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -767,7 +767,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while(wait_loop_index != 0UL)
{
wait_loop_index--;
diff --git a/Src/stm32l4xx_hal_hcd.c b/Src/stm32l4xx_hal_hcd.c
index 5e0a9b9..6be75db 100644
--- a/Src/stm32l4xx_hal_hcd.c
+++ b/Src/stm32l4xx_hal_hcd.c
@@ -182,8 +182,8 @@
* This parameter can be a value from 0 to 255
* @param speed Current device speed.
* This parameter can be one of these values:
- * HCD_SPEED_FULL: Full speed mode,
- * HCD_SPEED_LOW: Low speed mode
+ * HCD_DEVICE_SPEED_FULL: Full speed mode,
+ * HCD_DEVICE_SPEED_LOW: Low speed mode
* @param ep_type Endpoint Type.
* This parameter can be one of these values:
* EP_TYPE_CTRL: Control type,
@@ -562,6 +562,16 @@
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
}
+ /* Handle Rx Queue Level Interrupts */
+ if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ HCD_RXQLVL_IRQHandler(hhcd);
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
/* Handle Host channel Interrupt */
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
{
@@ -582,16 +592,6 @@
}
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
}
-
- /* Handle Rx Queue Level Interrupts */
- if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
- {
- USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-
- HCD_RXQLVL_IRQHandler(hhcd);
-
- USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- }
}
}
@@ -715,7 +715,9 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID, pHCD_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd,
+ HAL_HCD_CallbackIDTypeDef CallbackID,
+ pHCD_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -907,7 +909,8 @@
* @param pCallback pointer to the USB HCD Host Channel Notify URB Change Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd,
+ pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -1189,10 +1192,17 @@
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
{
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
hhcd->hc[ch_num].state = HC_DATATGLERR;
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR);
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ }
+ else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
+ hhcd->hc[ch_num].state = HC_XACTERR;
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
}
else
{
@@ -1244,8 +1254,18 @@
{
/* ... */
}
- hhcd->hc[ch_num].toggle_in ^= 1U;
+ if (hhcd->Init.dma_enable == 1U)
+ {
+ if (((hhcd->hc[ch_num].XferSize / hhcd->hc[ch_num].max_packet) & 1U) != 0U)
+ {
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
+ }
+ else
+ {
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH)
{
@@ -1253,17 +1273,17 @@
if (hhcd->hc[ch_num].state == HC_XFRC)
{
- hhcd->hc[ch_num].urb_state = URB_DONE;
+ hhcd->hc[ch_num].urb_state = URB_DONE;
}
else if (hhcd->hc[ch_num].state == HC_STALL)
{
- hhcd->hc[ch_num].urb_state = URB_STALL;
+ hhcd->hc[ch_num].urb_state = URB_STALL;
}
else if ((hhcd->hc[ch_num].state == HC_XACTERR) ||
(hhcd->hc[ch_num].state == HC_DATATGLERR))
{
hhcd->hc[ch_num].ErrCnt++;
- if (hhcd->hc[ch_num].ErrCnt > 3U)
+ if (hhcd->hc[ch_num].ErrCnt > 2U)
{
hhcd->hc[ch_num].ErrCnt = 0U;
hhcd->hc[ch_num].urb_state = URB_ERROR;
@@ -1271,18 +1291,19 @@
else
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- }
- /* re-activate the channel */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
+ /* re-activate the channel */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ }
}
else if (hhcd->hc[ch_num].state == HC_NAK)
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- /* re-activate the channel */
+
+ /* re-activate the channel */
tmpreg = USBx_HC(ch_num)->HCCHAR;
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
tmpreg |= USB_OTG_HCCHAR_CHENA;
@@ -1300,14 +1321,6 @@
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH);
HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
}
- else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- hhcd->hc[ch_num].ErrCnt++;
- hhcd->hc[ch_num].state = HC_XACTERR;
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
- }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK)
{
if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR)
@@ -1349,6 +1362,7 @@
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t ch_num = (uint32_t)chnum;
uint32_t tmpreg;
+ uint32_t num_packets;
if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR)
{
@@ -1367,15 +1381,6 @@
(void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
}
}
- else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
- {
- hhcd->hc[ch_num].state = HC_NYET;
- hhcd->hc[ch_num].do_ping = 1U;
- hhcd->hc[ch_num].ErrCnt = 0U;
- __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
- }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR)
{
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
@@ -1385,11 +1390,27 @@
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC)
{
hhcd->hc[ch_num].ErrCnt = 0U;
+
+ /* transaction completed with NYET state, update do ping state */
+ if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[ch_num].do_ping = 1U;
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
+ }
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
(void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC);
hhcd->hc[ch_num].state = HC_XFRC;
}
+ else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[ch_num].state = HC_NYET;
+ hhcd->hc[ch_num].do_ping = 1U;
+ hhcd->hc[ch_num].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
+ }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL)
{
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL);
@@ -1408,9 +1429,9 @@
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
{
+ hhcd->hc[ch_num].state = HC_XACTERR;
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
(void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- hhcd->hc[ch_num].state = HC_XACTERR;
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
@@ -1431,7 +1452,22 @@
if ((hhcd->hc[ch_num].ep_type == EP_TYPE_BULK) ||
(hhcd->hc[ch_num].ep_type == EP_TYPE_INTR))
{
- hhcd->hc[ch_num].toggle_out ^= 1U;
+ if (hhcd->Init.dma_enable == 1U)
+ {
+ if (hhcd->hc[ch_num].xfer_len > 0U)
+ {
+ num_packets = (hhcd->hc[ch_num].xfer_len + hhcd->hc[ch_num].max_packet - 1U) / hhcd->hc[ch_num].max_packet;
+
+ if ((num_packets & 1U) != 0U)
+ {
+ hhcd->hc[ch_num].toggle_out ^= 1U;
+ }
+ }
+ }
+ else
+ {
+ hhcd->hc[ch_num].toggle_out ^= 1U;
+ }
}
}
else if (hhcd->hc[ch_num].state == HC_NAK)
@@ -1450,7 +1486,7 @@
(hhcd->hc[ch_num].state == HC_DATATGLERR))
{
hhcd->hc[ch_num].ErrCnt++;
- if (hhcd->hc[ch_num].ErrCnt > 3U)
+ if (hhcd->hc[ch_num].ErrCnt > 2U)
{
hhcd->hc[ch_num].ErrCnt = 0U;
hhcd->hc[ch_num].urb_state = URB_ERROR;
@@ -1458,13 +1494,13 @@
else
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- }
- /* re-activate the channel */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
+ /* re-activate the channel */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ }
}
else
{
@@ -1491,14 +1527,15 @@
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t pktsts;
uint32_t pktcnt;
- uint32_t temp;
+ uint32_t GrxstspReg;
+ uint32_t xferSizePktCnt;
uint32_t tmpreg;
uint32_t ch_num;
- temp = hhcd->Instance->GRXSTSP;
- ch_num = temp & USB_OTG_GRXSTSP_EPNUM;
- pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17;
- pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+ GrxstspReg = hhcd->Instance->GRXSTSP;
+ ch_num = GrxstspReg & USB_OTG_GRXSTSP_EPNUM;
+ pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17;
+ pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4;
switch (pktsts)
{
@@ -1506,20 +1543,31 @@
/* Read the data into the host buffer. */
if ((pktcnt > 0U) && (hhcd->hc[ch_num].xfer_buff != (void *)0))
{
- (void)USB_ReadPacket(hhcd->Instance, hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt);
-
- /*manage multiple Xfer */
- hhcd->hc[ch_num].xfer_buff += pktcnt;
- hhcd->hc[ch_num].xfer_count += pktcnt;
-
- if ((USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0U)
+ if ((hhcd->hc[ch_num].xfer_count + pktcnt) <= hhcd->hc[ch_num].xfer_len)
{
- /* re-activate the channel when more packets are expected */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
- hhcd->hc[ch_num].toggle_in ^= 1U;
+ (void)USB_ReadPacket(hhcd->Instance,
+ hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt);
+
+ /* manage multiple Xfer */
+ hhcd->hc[ch_num].xfer_buff += pktcnt;
+ hhcd->hc[ch_num].xfer_count += pktcnt;
+
+ /* get transfer size packet count */
+ xferSizePktCnt = (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19;
+
+ if ((hhcd->hc[ch_num].max_packet == pktcnt) && (xferSizePktCnt > 0U))
+ {
+ /* re-activate the channel when more packets are expected */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
+ }
+ else
+ {
+ hhcd->hc[ch_num].urb_state = URB_ERROR;
}
}
break;
diff --git a/Src/stm32l4xx_hal_irda.c b/Src/stm32l4xx_hal_irda.c
index 8ed8084..bb18e8b 100644
--- a/Src/stm32l4xx_hal_irda.c
+++ b/Src/stm32l4xx_hal_irda.c
@@ -2279,7 +2279,7 @@
IRDA_ClockSourceTypeDef clocksource;
HAL_StatusTypeDef ret = HAL_OK;
#if defined(USART_PRESC_PRESCALER)
- const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
+ static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
#endif /* USART_PRESC_PRESCALER */
/* Check the communication parameters */
diff --git a/Src/stm32l4xx_hal_iwdg.c b/Src/stm32l4xx_hal_iwdg.c
index 767cf26..aea6508 100644
--- a/Src/stm32l4xx_hal_iwdg.c
+++ b/Src/stm32l4xx_hal_iwdg.c
@@ -16,33 +16,43 @@
(+) The IWDG can be started by either software or hardware (configurable
through option byte).
- (+) The IWDG is clocked by Low-Speed clock (LSI) and thus stays active even
- if the main clock fails.
+ (+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays
+ active even if the main clock fails.
- (+) Once the IWDG is started, the LSI is forced ON and both can not be
+ (+) Once the IWDG is started, the LSI is forced ON and both cannot be
disabled. The counter starts counting down from the reset value (0xFFF).
When it reaches the end of count value (0x000) a reset signal is
generated (IWDG reset).
(+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register,
- the IWDG_RLR value is reloaded in the counter and the watchdog reset is
- prevented.
+ the IWDG_RLR value is reloaded into the counter and the watchdog reset
+ is prevented.
(+) The IWDG is implemented in the VDD voltage domain that is still functional
- in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+ in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY).
IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
reset occurs.
- (+) Debug mode : When the microcontroller enters debug mode (core halted),
+ (+) Debug mode: When the microcontroller enters debug mode (core halted),
the IWDG counter either continues to work normally or stops, depending
on DBG_IWDG_STOP configuration bit in DBG module, accessible through
__HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros.
[..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
- The IWDG timeout may vary due to LSI frequency dispersion. STM32L4xx
- devices provide the capability to measure the LSI frequency (LSI clock
- connected internally to TIM16 CH1 input capture). The measured value
- can be used to have an IWDG timeout with an acceptable accuracy.
+ The IWDG timeout may vary due to LSI clock frequency dispersion.
+ STM32L4xx devices provide the capability to measure the LSI clock
+ frequency (LSI clock is internally connected to TIM16 CH1 input capture).
+ The measured value can be used to have an IWDG timeout with an
+ acceptable accuracy.
+
+ [..] Default timeout value (necessary for IWDG_SR status register update):
+ Constant LSI_VALUE is defined based on the nominal LSI clock frequency.
+ This frequency being subject to variations as mentioned above, the
+ default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT
+ below) may become too short or too long.
+ In such cases, this default timeout value can be tuned by redefining
+ the constant LSI_VALUE at user-application level (based, for instance,
+ on the measured LSI clock frequency as explained above).
##### How to use this driver #####
==============================================================================
@@ -108,10 +118,14 @@
/** @defgroup IWDG_Private_Defines IWDG Private Defines
* @{
*/
-/* Status register need 5 RC LSI divided by prescaler clock to be updated. With
- higher prescaler (256), and according to LSI variation, we need to wait at
- least 6 cycles so 48 ms. */
-#define HAL_IWDG_DEFAULT_TIMEOUT 48u
+/* Status register needs up to 5 LSI clock periods divided by the clock
+ prescaler to be updated. The number of LSI clock periods is upper-rounded to
+ 6 for the timeout value calculation.
+ The timeout value is also calculated using the highest prescaler (256) and
+ the LSI_VALUE constant. The value of this constant can be changed by the user
+ to take into account possible LSI clock period variations.
+ The timeout value is multiplied by 1000 to be converted in milliseconds. */
+#define HAL_IWDG_DEFAULT_TIMEOUT ((6UL * 256UL * 1000UL) / LSI_VALUE)
/**
* @}
*/
diff --git a/Src/stm32l4xx_hal_lptim.c b/Src/stm32l4xx_hal_lptim.c
index cab0346..64a905b 100644
--- a/Src/stm32l4xx_hal_lptim.c
+++ b/Src/stm32l4xx_hal_lptim.c
@@ -188,10 +188,10 @@
*/
#if defined(LPTIM2)
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \
- (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT())
+ (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT())
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \
- (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT())
+ (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT())
#else
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT()
@@ -215,8 +215,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions.
- *
+ * @brief Initialization and Configuration functions.
+ *
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
@@ -253,19 +253,17 @@
assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+ assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
}
assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
- }
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)
- {
assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
- assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
}
assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));
assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
@@ -328,21 +326,18 @@
/* Get the LPTIMx CFGR value */
tmpcfgr = hlptim->Instance->CFGR;
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL));
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
}
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRIGSEL));
- }
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)
- {
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_CKFLT));
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
}
- /* Clear CKSEL, CKPOL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_CKPOL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
+ /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE));
/* Set initialization parameters */
@@ -361,19 +356,21 @@
hlptim->Init.UltraLowPowerClock.SampleTime);
}
- /* Configure the active edge or edges used by the counter only if LPTIM is
- * clocked by an external clock source
- */
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ /* Configure LPTIM external clock polarity and digital filter */
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
- tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity);
+ tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity |
+ hlptim->Init.UltraLowPowerClock.SampleTime);
}
+ /* Configure LPTIM external trigger */
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
/* Enable External trigger and set the trigger source */
- tmpcfgr |= (hlptim->Init.Trigger.Source |
- hlptim->Init.Trigger.ActiveEdge);
+ tmpcfgr |= (hlptim->Init.Trigger.Source |
+ hlptim->Init.Trigger.ActiveEdge |
+ hlptim->Init.Trigger.SampleTime);
}
/* Write to LPTIMx CFGR */
@@ -487,8 +484,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions
- * @brief Start-Stop operation functions.
- *
+ * @brief Start-Stop operation functions.
+ *
@verbatim
==============================================================================
##### LPTIM Start Stop operation functions #####
@@ -1645,7 +1642,8 @@
hlptim->State = HAL_LPTIM_STATE_BUSY;
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
- if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM)
+ && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
/* Check if clock is prescaled */
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
@@ -1726,7 +1724,8 @@
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance);
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
- if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM)
+ && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
/* Check if clock is prescaled */
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
@@ -1833,8 +1832,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions
- * @brief Read operation functions.
- *
+ * @brief Read operation functions.
+ *
@verbatim
==============================================================================
##### LPTIM Read operation functions #####
@@ -1891,8 +1890,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks
- * @brief LPTIM IRQ handler.
- *
+ * @brief LPTIM IRQ handler.
+ *
@verbatim
==============================================================================
##### LPTIM IRQ handler and callbacks #####
@@ -2452,8 +2451,8 @@
*/
/** @defgroup LPTIM_Group5 Peripheral State functions
- * @brief Peripheral State functions.
- *
+ * @brief Peripheral State functions.
+ *
@verbatim
==============================================================================
##### Peripheral State functions #####
@@ -2532,8 +2531,7 @@
{
result = HAL_TIMEOUT;
}
- }
- while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL));
+ } while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL));
return result;
}
diff --git a/Src/stm32l4xx_hal_mmc.c b/Src/stm32l4xx_hal_mmc.c
index a8269b1..31ebfc4 100644
--- a/Src/stm32l4xx_hal_mmc.c
+++ b/Src/stm32l4xx_hal_mmc.c
@@ -36,13 +36,13 @@
(##) On STM32L4Rx/STM32L4Sxx devices, no DMA configuration is need, an internal DMA for SDMMC Peripheral is used.
(##) On other devices, perform DMA Configuration if you need to use DMA process (HAL_MMC_ReadBlocks_DMA()
and HAL_MMC_WriteBlocks_DMA() APIs).
- (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
- (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
(##) NVIC configuration if you need to use interrupt process when using DMA transfer.
(+++) Configure the SDMMC and DMA interrupt priorities using function HAL_NVIC_SetPriority();
DMA priority is superior to SDMMC's priority
(+++) Enable the NVIC DMA and SDMMC IRQs using function HAL_NVIC_EnableIRQ()
- (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
+ (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
and __HAL_MMC_DISABLE_IT() inside the communication process.
(+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT()
and __HAL_MMC_CLEAR_IT()
@@ -117,7 +117,7 @@
(+) You can read from MMC card in Interrupt mode by using function HAL_MMC_ReadBlocks_IT().
This function allows the read of 512 bytes blocks.
- You can choose either one block read operation or multiple block read operation
+ You can choose either one block read operation or multiple block read operation
by adjusting the "NumberOfBlocks" parameter.
After this, you have to ensure that the transfer is done correctly. The check is done
through HAL_MMC_GetCardState() function for MMC card state.
@@ -141,18 +141,18 @@
by adjusting the "NumberOfBlocks" parameter.
After this, you have to ensure that the transfer is done correctly. The check is done
through HAL_MMC_GetCardState() function for MMC card state.
- You could also check the DMA transfer process through the MMC Tx interrupt event.
+ You could also check the DMA transfer process through the MMC Tx interrupt event.
(+) You can write to MMC card in Interrupt mode by using function HAL_MMC_WriteBlocks_IT().
This function allows the read of 512 bytes blocks.
- You can choose either one block read operation or multiple block read operation
+ You can choose either one block read operation or multiple block read operation
by adjusting the "NumberOfBlocks" parameter.
After this, you have to ensure that the transfer is done correctly. The check is done
through HAL_MMC_GetCardState() function for MMC card state.
You could also check the IT transfer process through the MMC Tx interrupt event.
*** MMC card information ***
- ===========================
+ ===========================
[..]
(+) To get MMC card information, you can use the function HAL_MMC_GetCardInfo().
It returns useful information about the MMC card such as block size, card type,
@@ -298,6 +298,10 @@
#define MMC_EXT_CSD_PWR_CL_52_POS 16
#define MMC_EXT_CSD_PWR_CL_DDR_52_POS 24
#endif
+
+/* Frequencies used in the driver for clock divider calculation */
+#define MMC_INIT_FREQ 400000U /* Initalization phase : 400 kHz max */
+#define MMC_HIGH_SPEED_FREQ 52000000U /* High speed phase : 52 MHz max */
/**
* @}
*/
@@ -467,9 +471,10 @@
return HAL_ERROR;
}
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- Init.ClockDiv = ((sdmmc_clk/400000U) - 2U);
+ Init.ClockDiv = ((sdmmc_clk/MMC_INIT_FREQ) - 2U);
#else
- Init.ClockDiv = sdmmc_clk/(2U*400000U);
+ Init.ClockDiv = sdmmc_clk/(2U*MMC_INIT_FREQ);
+ Init.Transceiver = SDMMC_TRANSCEIVER_DISABLE;
#endif
/* Initialize SDMMC peripheral interface with default configuration */
@@ -658,7 +663,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -711,6 +716,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
@@ -745,6 +751,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
hmmc->State= HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_TIMEOUT;
}
}
@@ -763,6 +770,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
}
@@ -774,6 +782,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else if(__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL))
@@ -782,6 +791,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else if(__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_RXOVERR))
@@ -790,6 +800,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else
@@ -818,9 +829,10 @@
if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
{
/* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
hmmc->State= HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
}
@@ -871,7 +883,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -920,6 +932,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
@@ -965,6 +978,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_TIMEOUT;
}
}
@@ -983,6 +997,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
}
@@ -994,6 +1009,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else if(__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_DCRCFAIL))
@@ -1002,6 +1018,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else if(__HAL_MMC_GET_FLAG(hmmc, SDMMC_FLAG_TXUNDERR))
@@ -1010,6 +1027,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else
@@ -1060,7 +1078,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -1074,8 +1092,6 @@
hmmc->pRxBuffPtr = pData;
hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | SDMMC_FLAG_RXFIFOHF));
-
if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
{
add *= 512U;
@@ -1118,9 +1134,12 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | SDMMC_FLAG_RXFIFOHF));
+
return HAL_OK;
}
else
@@ -1158,7 +1177,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -1172,9 +1191,6 @@
hmmc->pTxBuffPtr = pData;
hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
- /* Enable transfer interrupts */
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | SDMMC_FLAG_TXFIFOHE));
-
if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
{
add *= 512U;
@@ -1214,11 +1230,12 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- /* Configure the MMC DPSM (Data Path State Machine) */
+ /* Configure the MMC DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B;
@@ -1227,7 +1244,10 @@
config.DPSM = SDMMC_DPSM_ENABLE;
(void)SDMMC_ConfigData(hmmc->Instance, &config);
#endif
-
+
+ /* Enable transfer interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | SDMMC_FLAG_TXFIFOHE));
+
return HAL_OK;
}
else
@@ -1263,9 +1283,9 @@
if(hmmc->State == HAL_MMC_STATE_READY)
{
- hmmc->ErrorCode = HAL_DMA_ERROR_NONE;
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -1277,8 +1297,6 @@
hmmc->Instance->DCTRL = 0U;
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND));
-
/* Set the DMA transfer complete callback */
hmmc->hdmarx->XferCpltCallback = MMC_DMAReceiveCplt;
@@ -1308,9 +1326,6 @@
config.DPSM = SDMMC_DPSM_DISABLE;
(void)SDMMC_ConfigData(hmmc->Instance, &config);
- /* Enable transfer interrupts */
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND));
-
__SDMMC_CMDTRANS_ENABLE( hmmc->Instance);
hmmc->Instance->IDMABASE0 = (uint32_t) pData ;
hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_SINGLE_BUFF;
@@ -1318,7 +1333,6 @@
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hmmc->hdmarx, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)pData, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
{
- __HAL_MMC_DISABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND));
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode = HAL_MMC_ERROR_DMA;
hmmc->State = HAL_MMC_STATE_READY;
@@ -1358,12 +1372,15 @@
{
/* Clear all the static flags */
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
- __HAL_MMC_DISABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND));
hmmc->ErrorCode = errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
+ /* Enable transfer interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND));
+
return HAL_OK;
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
}
@@ -1404,7 +1421,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
- if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ if((add + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
{
hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
return HAL_ERROR;
@@ -1416,9 +1433,6 @@
hmmc->Instance->DCTRL = 0U;
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- /* Enable MMC Error interrupts */
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR));
-
/* Set the DMA transfer complete callback */
hmmc->hdmatx->XferCpltCallback = MMC_DMATransmitCplt;
@@ -1447,9 +1461,6 @@
config.DPSM = SDMMC_DPSM_DISABLE;
(void)SDMMC_ConfigData(hmmc->Instance, &config);
- /* Enable transfer interrupts */
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND));
-
__SDMMC_CMDTRANS_ENABLE( hmmc->Instance);
hmmc->Instance->IDMABASE0 = (uint32_t) pData ;
@@ -1475,9 +1486,9 @@
{
/* Clear all the static flags */
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
- __HAL_MMC_DISABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND));
hmmc->ErrorCode |= errorstate;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
@@ -1488,15 +1499,15 @@
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hmmc->hdmatx, (uint32_t)pData, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
{
- __HAL_MMC_DISABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND));
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
return HAL_ERROR;
}
else
- {
- /* Configure the MMC DPSM (Data Path State Machine) */
+ {
+ /* Configure the MMC DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
config.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B;
@@ -1505,9 +1516,15 @@
config.DPSM = SDMMC_DPSM_ENABLE;
(void)SDMMC_ConfigData(hmmc->Instance, &config);
+ /* Enable MMC Error interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR));
+
return HAL_OK;
}
#else
+ /* Enable MMC Error interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND));
+
return HAL_OK;
#endif
}
@@ -1675,6 +1692,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS);
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
if(((context & MMC_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
{
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
@@ -1710,9 +1728,10 @@
/* Disable the DMA transfer for transmit request by setting the DMAEN bit
in the MMC DCTRL register */
hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDMMC_DCTRL_DMAEN);
-
+
hmmc->State = HAL_MMC_STATE_READY;
-
+ hmmc->Context = MMC_CONTEXT_NONE;
+
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
hmmc->TxCpltCallback(hmmc);
#else
@@ -1742,6 +1761,7 @@
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS);
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
if(((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
{
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
@@ -1812,6 +1832,7 @@
{
/* Set the MMC state to ready to be able to start again the process */
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
hmmc->ErrorCallback(hmmc);
#else
@@ -1861,6 +1882,7 @@
{
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
hmmc->AbortCpltCallback(hmmc);
#else
@@ -2414,7 +2436,7 @@
* @brief Returns information the information of the card which are stored on
* the Extended CSD register.
* @param hmmc Pointer to MMC handle
- * @param pExtCSD Pointer to a memory area (512 bytes) that contains all
+ * @param pExtCSD Pointer to a memory area (512 bytes) that contains all
* Extended CSD register parameters
* @param Timeout Specify timeout value
* @retval HAL status
@@ -2581,7 +2603,7 @@
#else
errorstate = MMC_PwrClassUpdate(hmmc, WideMode, 0U);
#endif
-
+
if(errorstate == HAL_MMC_ERROR_NONE)
{
if(WideMode == SDMMC_BUS_WIDE_8B)
@@ -2601,7 +2623,7 @@
/* WideMode is not a valid argument*/
errorstate = HAL_MMC_ERROR_PARAM;
}
-
+
/* Check for switch error and violation of the trial number of sending CMD 13 */
if(errorstate == HAL_MMC_ERROR_NONE)
{
@@ -2614,12 +2636,12 @@
{
break;
}
-
+
/* Get command response */
response = SDMMC_GetResponse(hmmc->Instance, SDMMC_RESP1);
count--;
}while(((response & 0x100U) == 0U) && (count != 0U));
-
+
/* Check the status after the switch command execution */
if ((count != 0U) && (errorstate == HAL_MMC_ERROR_NONE))
{
@@ -2704,10 +2726,14 @@
}
else
{
- errorstate = MMC_DDR_Mode(hmmc, ENABLE);
- if(errorstate != HAL_MMC_ERROR_NONE)
+ if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U)
{
- hmmc->ErrorCode |= errorstate;
+ /* DDR mode not supported with CLKDIV = 0 */
+ errorstate = MMC_DDR_Mode(hmmc, ENABLE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
}
}
}
@@ -2738,10 +2764,14 @@
}
else
{
- errorstate = MMC_DDR_Mode(hmmc, ENABLE);
- if(errorstate != HAL_MMC_ERROR_NONE)
+ if ((hmmc->Instance->CLKCR & SDMMC_CLKCR_CLKDIV) != 0U)
{
- hmmc->ErrorCode |= errorstate;
+ /* DDR mode not supported with CLKDIV = 0 */
+ errorstate = MMC_DDR_Mode(hmmc, ENABLE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
}
}
}
@@ -2862,7 +2892,7 @@
{
/* Disable the MMC DMA request */
hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDMMC_DCTRL_DMAEN);
-
+
/* Abort the MMC DMA Tx Stream */
if(hmmc->hdmatx != NULL)
{
@@ -2929,7 +2959,7 @@
{
/* Disable the MMC DMA request */
hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDMMC_DCTRL_DMAEN);
-
+
/* Abort the MMC DMA Tx Stream */
if(hmmc->hdmatx != NULL)
{
@@ -2949,7 +2979,7 @@
}
}
}
-
+
/* No transfer ongoing on both DMA channels*/
if((hmmc->hdmatx == NULL) && (hmmc->hdmarx == NULL))
{
@@ -3367,24 +3397,24 @@
* @param hdma DMA handle
* @retval None
*/
-static void MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+static void MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma)
{
MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
-
+
/* Enable DATAEND Interrupt */
__HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DATAEND));
}
/**
- * @brief DMA MMC receive process complete callback
+ * @brief DMA MMC receive process complete callback
* @param hdma DMA handle
* @retval None
*/
-static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
{
MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
uint32_t errorstate;
-
+
/* Send stop command in multiblock write */
if(hmmc->Context == (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA))
{
@@ -3399,15 +3429,16 @@
#endif
}
}
-
+
/* Disable the DMA transfer for transmit request by setting the DMAEN bit
in the MMC DCTRL register */
hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDMMC_DCTRL_DMAEN);
-
+
/* Clear all the static flags */
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_DATA_FLAGS);
-
+
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
hmmc->RxCpltCallback(hmmc);
@@ -3417,37 +3448,38 @@
}
/**
- * @brief DMA MMC communication error callback
+ * @brief DMA MMC communication error callback
* @param hdma DMA handle
* @retval None
*/
-static void MMC_DMAError(DMA_HandleTypeDef *hdma)
+static void MMC_DMAError(DMA_HandleTypeDef *hdma)
{
MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
HAL_MMC_CardStateTypeDef CardState;
uint32_t RxErrorCode, TxErrorCode;
-
+
RxErrorCode = hmmc->hdmarx->ErrorCode;
- TxErrorCode = hmmc->hdmatx->ErrorCode;
+ TxErrorCode = hmmc->hdmatx->ErrorCode;
if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE))
{
/* Clear All flags */
__HAL_MMC_CLEAR_FLAG(hmmc, SDMMC_STATIC_FLAGS);
-
+
/* Disable All interrupts */
__HAL_MMC_DISABLE_IT(hmmc, SDMMC_IT_DATAEND | SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT|\
SDMMC_IT_TXUNDERR| SDMMC_IT_RXOVERR);
-
+
hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
CardState = HAL_MMC_GetCardState(hmmc);
if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
{
hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
}
-
+
hmmc->State= HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
}
-
+
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
hmmc->ErrorCallback(hmmc);
#else
@@ -3456,30 +3488,31 @@
}
/**
- * @brief DMA MMC Tx Abort callback
+ * @brief DMA MMC Tx Abort callback
* @param hdma DMA handle
* @retval None
*/
-static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma)
+static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma)
{
MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
HAL_MMC_CardStateTypeDef CardState;
-
+
if(hmmc->hdmatx != NULL)
{
hmmc->hdmatx = NULL;
}
-
+
/* All DMA channels are aborted */
if(hmmc->hdmarx == NULL)
{
CardState = HAL_MMC_GetCardState(hmmc);
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
{
hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
-
+
if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
{
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
@@ -3501,30 +3534,31 @@
}
/**
- * @brief DMA MMC Rx Abort callback
+ * @brief DMA MMC Rx Abort callback
* @param hdma DMA handle
* @retval None
*/
-static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma)
+static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma)
{
MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
HAL_MMC_CardStateTypeDef CardState;
-
+
if(hmmc->hdmarx != NULL)
{
hmmc->hdmarx = NULL;
}
-
+
/* All DMA channels are aborted */
if(hmmc->hdmatx == NULL)
{
CardState = HAL_MMC_GetCardState(hmmc);
hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->Context = MMC_CONTEXT_NONE;
if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
{
hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
-
+
if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
{
#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
@@ -3628,7 +3662,7 @@
{
hmmc->ErrorCode |= errorstate;
}
-
+
/* Get Extended CSD parameters */
if (HAL_MMC_GetCardExtCSD(hmmc, hmmc->Ext_CSD, SDMMC_DATATIMEOUT) != HAL_OK)
{
@@ -3641,12 +3675,12 @@
{
hmmc->ErrorCode |= errorstate;
}
-
+
/* Configure the SDMMC peripheral */
Init = hmmc->Init;
Init.BusWide = SDMMC_BUS_WIDE_1B;
(void)SDMMC_Init(hmmc->Instance, Init);
-
+
/* All cards are initialized */
return HAL_MMC_ERROR_NONE;
}
@@ -3691,7 +3725,7 @@
/* Get operating voltage*/
validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
}
-
+
/* When power routine is finished and command returns valid voltage */
if (((response & (0xFF000000U)) >> 24) == 0xC0U)
{
@@ -3950,6 +3984,7 @@
{
uint32_t errorstate = HAL_MMC_ERROR_NONE;
uint32_t response = 0U, count;
+ uint32_t sdmmc_clk;
SDMMC_InitTypeDef Init;
if (((hmmc->Instance->CLKCR & SDMMC_CLKCR_BUSSPEED) != 0U) && (state == DISABLE))
@@ -4009,15 +4044,24 @@
{
Init.ClockDiv = hmmc->Init.ClockDiv;
(void)SDMMC_Init(hmmc->Instance, Init);
-
+
CLEAR_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED);
}
else
{
- Init.ClockDiv = SDMMC_HSpeed_CLK_DIV;
- (void)SDMMC_Init(hmmc->Instance, Init);
-
- SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED);
+ /* High Speed Clock should be less or equal to 52MHz*/
+ sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC1);
+ if (sdmmc_clk == 0U)
+ {
+ errorstate = SDMMC_ERROR_INVALID_PARAMETER;
+ }
+ else
+ {
+ Init.ClockDiv = sdmmc_clk/(2U*MMC_HIGH_SPEED_FREQ);
+ (void)SDMMC_Init(hmmc->Instance, Init);
+
+ SET_BIT(hmmc->Instance->CLKCR, SDMMC_CLKCR_BUSSPEED);
+ }
}
}
}
diff --git a/Src/stm32l4xx_hal_mmc_ex.c b/Src/stm32l4xx_hal_mmc_ex.c
index 79eb6ad..9fefe0e 100644
--- a/Src/stm32l4xx_hal_mmc_ex.c
+++ b/Src/stm32l4xx_hal_mmc_ex.c
@@ -155,8 +155,6 @@
hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0;
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC));
-
/* Read Blocks in DMA mode */
hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
@@ -169,6 +167,8 @@
return HAL_ERROR;
}
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_RXOVERR | SDMMC_IT_DATAEND | SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC));
+
return HAL_OK;
}
else
@@ -234,8 +234,6 @@
hmmc->Instance->IDMACTRL = SDMMC_ENABLE_IDMA_DOUBLE_BUFF0;
- __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC));
-
/* Write Blocks in DMA mode */
hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
@@ -248,6 +246,8 @@
return HAL_ERROR;
}
+ __HAL_MMC_ENABLE_IT(hmmc, (SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_TXUNDERR | SDMMC_IT_DATAEND | SDMMC_FLAG_IDMATE | SDMMC_FLAG_IDMABTC));
+
return HAL_OK;
}
else
diff --git a/Src/stm32l4xx_hal_msp_template.c b/Src/stm32l4xx_hal_msp_template.c
index f9cad52..6752c8e 100644
--- a/Src/stm32l4xx_hal_msp_template.c
+++ b/Src/stm32l4xx_hal_msp_template.c
@@ -3,7 +3,7 @@
* @file stm32l4xx_hal_msp_template.c
* @author MCD Application Team
* @brief HAL MSP module.
- * This file template is located in the HAL folder and should be copied
+ * This file template is located in the HAL folder and should be copied
* to the user folder.
******************************************************************************
* @attention
@@ -16,8 +16,8 @@
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
- ******************************************************************************
- */
+ ******************************************************************************
+ */
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"
@@ -49,19 +49,19 @@
*/
void HAL_MspInit(void)
{
- /* NOTE : This function is generated automatically by STM32CubeMX and eventually
+ /* NOTE : This function is generated automatically by STM32CubeMX and eventually
modified by the user
- */
+ */
}
/**
* @brief DeInitialize the Global MSP.
- * @param None
+ * @param None
* @retval None
*/
void HAL_MspDeInit(void)
{
- /* NOTE : This function is generated automatically by STM32CubeMX and eventually
+ /* NOTE : This function is generated automatically by STM32CubeMX and eventually
modified by the user
*/
}
@@ -73,19 +73,19 @@
*/
void HAL_PPP_MspInit(void)
{
- /* NOTE : This function is generated automatically by STM32CubeMX and eventually
+ /* NOTE : This function is generated automatically by STM32CubeMX and eventually
modified by the user
- */
+ */
}
/**
* @brief DeInitialize the PPP MSP.
- * @param None
+ * @param None
* @retval None
*/
void HAL_PPP_MspDeInit(void)
{
- /* NOTE : This function is generated automatically by STM32CubeMX and eventually
+ /* NOTE : This function is generated automatically by STM32CubeMX and eventually
modified by the user
*/
}
diff --git a/Src/stm32l4xx_hal_nand.c b/Src/stm32l4xx_hal_nand.c
index 42c7f3b..b9402ba 100644
--- a/Src/stm32l4xx_hal_nand.c
+++ b/Src/stm32l4xx_hal_nand.c
@@ -182,7 +182,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_NAND_MspInit(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
}
/* Initialize NAND control Interface */
@@ -222,7 +222,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_NAND_MspDeInit(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Configure the NAND registers with their reset values */
(void)FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
@@ -285,7 +285,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Rising edge pending bit */
__FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_RISING_EDGE);
@@ -299,7 +299,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Level pending bit */
__FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_LEVEL);
@@ -313,7 +313,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Falling edge pending bit */
__FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FALLING_EDGE);
@@ -327,7 +327,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt FIFO empty pending bit */
__FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FEMPT);
@@ -381,7 +381,7 @@
{
__IO uint32_t data = 0;
__IO uint32_t data1 = 0;
- uint32_t deviceAddress;
+ uint32_t deviceaddress;
/* Check the NAND controller state */
if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -397,18 +397,18 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* Send Read ID command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_READID;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
__DSB();
/* Read the electronic signature from NAND flash */
if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8)
{
- data = *(__IO uint32_t *)deviceAddress;
+ data = *(__IO uint32_t *)deviceaddress;
/* Return the data read */
pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
@@ -418,8 +418,8 @@
}
else
{
- data = *(__IO uint32_t *)deviceAddress;
- data1 = *((__IO uint32_t *)deviceAddress + 4);
+ data = *(__IO uint32_t *)deviceaddress;
+ data1 = *((__IO uint32_t *)deviceaddress + 4);
/* Return the data read */
pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
@@ -450,7 +450,7 @@
*/
HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
{
- uint32_t deviceAddress;
+ uint32_t deviceaddress;
/* Check the NAND controller state */
if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -466,10 +466,10 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* Send NAND reset command */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = 0xFF;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF;
/* Update the NAND controller state */
hnand->State = HAL_NAND_STATE_READY;
@@ -520,7 +520,10 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numPagesRead = 0U, nandAddress, nbpages = NumPageToRead;
+ uint32_t deviceaddress;
+ uint32_t numpagesread = 0U;
+ uint32_t nandaddress;
+ uint32_t nbpages = NumPageToRead;
uint8_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -537,16 +540,16 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Page(s) read loop */
- while ((nbpages != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Send read page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
/* Cards with page size <= 512 bytes */
@@ -554,22 +557,22 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -577,31 +580,31 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
__DSB();
@@ -626,25 +629,25 @@
}
/* Go back to read mode */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = ((uint8_t)0x00U);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
__DSB();
}
/* Get Data into Buffer */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
- *buff = *(uint8_t *)deviceAddress;
+ *buff = *(uint8_t *)deviceaddress;
buff++;
}
/* Increment read pages number */
- numPagesRead++;
+ numpagesread++;
/* Decrement pages to read */
nbpages--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -675,7 +678,10 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numPagesRead = 0, nandAddress, nbpages = NumPageToRead;
+ uint32_t deviceaddress;
+ uint32_t numpagesread = 0U;
+ uint32_t nandaddress;
+ uint32_t nbpages = NumPageToRead;
uint16_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -692,16 +698,16 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Page(s) read loop */
- while ((nbpages != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Send read page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
/* Cards with page size <= 512 bytes */
@@ -709,22 +715,22 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -732,31 +738,31 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
__DSB();
if (hnand->Config.ExtraCommandEnable == ENABLE)
@@ -780,25 +786,36 @@
}
/* Go back to read mode */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = ((uint8_t)0x00U);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
__DSB();
}
+ /* Calculate PageSize */
+ if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8)
+ {
+ hnand->Config.PageSize = hnand->Config.PageSize / 2U;
+ }
+ else
+ {
+ /* Do nothing */
+ /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/
+ }
+
/* Get Data into Buffer */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
- *buff = *(uint16_t *)deviceAddress;
+ *buff = *(uint16_t *)deviceaddress;
buff++;
}
/* Increment read pages number */
- numPagesRead++;
+ numpagesread++;
/* Decrement pages to read */
nbpages--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -829,7 +846,10 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numPagesWritten = 0, nandAddress, nbpages = NumPageToWrite;
+ uint32_t deviceaddress;
+ uint32_t numpageswritten = 0U;
+ uint32_t nandaddress;
+ uint32_t nbpages = NumPageToWrite;
uint8_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -846,18 +866,18 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Page(s) write loop */
- while ((nbpages != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Send write page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
/* Cards with page size <= 512 bytes */
@@ -865,22 +885,22 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -888,26 +908,26 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -915,12 +935,12 @@
/* Write data to memory */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
- *(__IO uint8_t *)deviceAddress = *buff;
+ *(__IO uint8_t *)deviceaddress = *buff;
buff++;
__DSB();
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
__DSB();
/* Get tick */
@@ -942,13 +962,13 @@
}
/* Increment written pages number */
- numPagesWritten++;
+ numpageswritten++;
/* Decrement pages to write */
nbpages--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -979,7 +999,10 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numPagesWritten = 0, nandAddress, nbpages = NumPageToWrite;
+ uint32_t deviceaddress;
+ uint32_t numpageswritten = 0U;
+ uint32_t nandaddress;
+ uint32_t nbpages = NumPageToWrite;
uint16_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -996,18 +1019,18 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Page(s) write loop */
- while ((nbpages != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbpages != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Send write page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
/* Cards with page size <= 512 bytes */
@@ -1015,22 +1038,22 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -1038,39 +1061,50 @@
{
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
+ /* Calculate PageSize */
+ if (hnand->Init.MemoryDataWidth == FMC_NAND_MEM_BUS_WIDTH_8)
+ {
+ hnand->Config.PageSize = hnand->Config.PageSize / 2U;
+ }
+ else
+ {
+ /* Do nothing */
+ /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/
+ }
+
/* Write data to memory */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
- *(__IO uint16_t *)deviceAddress = *buff;
+ *(__IO uint16_t *)deviceaddress = *buff;
buff++;
__DSB();
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
__DSB();
/* Get tick */
@@ -1092,13 +1126,13 @@
}
/* Increment written pages number */
- numPagesWritten++;
+ numpageswritten++;
/* Decrement pages to write */
nbpages--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -1129,7 +1163,11 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numSpareAreaRead = 0, nandAddress, columnAddress, nbspare = NumSpareAreaToRead;
+ uint32_t deviceaddress;
+ uint32_t numsparearearead = 0U;
+ uint32_t nandaddress;
+ uint32_t columnaddress;
+ uint32_t nbspare = NumSpareAreaToRead;
uint8_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -1146,78 +1184,78 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnAddress = COLUMN_ADDRESS(hnand);
+ columnaddress = COLUMN_ADDRESS(hnand);
/* Spare area(s) read loop */
- while ((nbspare != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Cards with page size <= 512 bytes */
if ((hnand->Config.PageSize) <= 512U)
{
/* Send read spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
else /* (hnand->Config.PageSize) > 512 */
{
/* Send read spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
__DSB();
if (hnand->Config.ExtraCommandEnable == ENABLE)
@@ -1241,25 +1279,25 @@
}
/* Go back to read mode */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = ((uint8_t)0x00U);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
__DSB();
}
/* Get Data into Buffer */
for (index = 0U; index < hnand->Config.SpareAreaSize; index++)
{
- *buff = *(uint8_t *)deviceAddress;
+ *buff = *(uint8_t *)deviceaddress;
buff++;
}
/* Increment read spare areas number */
- numSpareAreaRead++;
+ numsparearearead++;
/* Decrement spare areas to read */
nbspare--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -1290,7 +1328,11 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numSpareAreaRead = 0, nandAddress, columnAddress, nbspare = NumSpareAreaToRead;
+ uint32_t deviceaddress;
+ uint32_t numsparearearead = 0U;
+ uint32_t nandaddress;
+ uint32_t columnaddress;
+ uint32_t nbspare = NumSpareAreaToRead;
uint16_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -1307,78 +1349,78 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnAddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
+ columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand));
/* Spare area(s) read loop */
- while ((nbspare != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Cards with page size <= 512 bytes */
if ((hnand->Config.PageSize) <= 512U)
{
/* Send read spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
else /* (hnand->Config.PageSize) > 512 */
{
/* Send read spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
__DSB();
if (hnand->Config.ExtraCommandEnable == ENABLE)
@@ -1402,25 +1444,25 @@
}
/* Go back to read mode */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = ((uint8_t)0x00U);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = ((uint8_t)0x00);
__DSB();
}
/* Get Data into Buffer */
for (index = 0U; index < hnand->Config.SpareAreaSize; index++)
{
- *buff = *(uint16_t *)deviceAddress;
+ *buff = *(uint16_t *)deviceaddress;
buff++;
}
/* Increment read spare areas number */
- numSpareAreaRead++;
+ numsparearearead++;
/* Decrement spare areas to read */
nbspare--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -1451,7 +1493,11 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numSpareAreaWritten = 0, nandAddress, columnAddress, nbspare = NumSpareAreaTowrite;
+ uint32_t deviceaddress;
+ uint32_t numspareareawritten = 0U;
+ uint32_t nandaddress;
+ uint32_t columnaddress;
+ uint32_t nbspare = NumSpareAreaTowrite;
uint8_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -1468,77 +1514,77 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* Page address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnAddress = COLUMN_ADDRESS(hnand);
+ columnaddress = COLUMN_ADDRESS(hnand);
/* Spare area(s) write loop */
- while ((nbspare != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Cards with page size <= 512 bytes */
if ((hnand->Config.PageSize) <= 512U)
{
/* Send write Spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
else /* (hnand->Config.PageSize) > 512 */
{
/* Send write Spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -1546,12 +1592,12 @@
/* Write data to memory */
for (index = 0U; index < hnand->Config.SpareAreaSize; index++)
{
- *(__IO uint8_t *)deviceAddress = *buff;
+ *(__IO uint8_t *)deviceaddress = *buff;
buff++;
__DSB();
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
__DSB();
/* Get tick */
@@ -1573,13 +1619,13 @@
}
/* Increment written spare areas number */
- numSpareAreaWritten++;
+ numspareareawritten++;
/* Decrement spare areas to write */
nbspare--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -1610,7 +1656,11 @@
{
uint32_t index;
uint32_t tickstart;
- uint32_t deviceAddress, numSpareAreaWritten = 0, nandAddress, columnAddress, nbspare = NumSpareAreaTowrite;
+ uint32_t deviceaddress;
+ uint32_t numspareareawritten = 0U;
+ uint32_t nandaddress;
+ uint32_t columnaddress;
+ uint32_t nbspare = NumSpareAreaTowrite;
uint16_t *buff = pBuffer;
/* Check the NAND controller state */
@@ -1627,77 +1677,77 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- deviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* NAND raw address calculation */
- nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+ nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnAddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
+ columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand));
/* Spare area(s) write loop */
- while ((nbspare != 0U) && (nandAddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
+ while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
{
/* Cards with page size <= 512 bytes */
if ((hnand->Config.PageSize) <= 512U)
{
/* Send write Spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00U;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00U;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
else /* (hnand->Config.PageSize) > 512 */
{
/* Send write Spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
__DSB();
if (((hnand->Config.BlockSize) * (hnand->Config.BlockNbr)) <= 65535U)
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
}
else /* ((hnand->Config.BlockSize)*(hnand->Config.BlockNbr)) > 65535 */
{
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_1ST_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = COLUMN_2ND_CYCLE(columnaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandaddress);
__DSB();
- *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandaddress);
__DSB();
}
}
@@ -1705,12 +1755,12 @@
/* Write data to memory */
for (index = 0U; index < hnand->Config.SpareAreaSize; index++)
{
- *(__IO uint16_t *)deviceAddress = *buff;
+ *(__IO uint16_t *)deviceaddress = *buff;
buff++;
__DSB();
}
- *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
__DSB();
/* Get tick */
@@ -1732,13 +1782,13 @@
}
/* Increment written spare areas number */
- numSpareAreaWritten++;
+ numspareareawritten++;
/* Decrement spare areas to write */
nbspare--;
/* Increment the NAND address */
- nandAddress = (uint32_t)(nandAddress + 1U);
+ nandaddress = (uint32_t)(nandaddress + 1U);
}
/* Update the NAND controller state */
@@ -1764,7 +1814,7 @@
*/
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
{
- uint32_t DeviceAddress;
+ uint32_t deviceaddress;
/* Check the NAND controller state */
if (hnand->State == HAL_NAND_STATE_BUSY)
@@ -1780,19 +1830,19 @@
hnand->State = HAL_NAND_STATE_BUSY;
/* Identify the device address */
- DeviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* Send Erase block command sequence */
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE0;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
__DSB();
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
__DSB();
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
__DSB();
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
__DSB();
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE1;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
__DSB();
/* Update the NAND controller state */
@@ -1981,7 +2031,7 @@
__HAL_UNLOCK(hnand);
return status;
}
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -2143,17 +2193,17 @@
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
{
uint32_t data;
- uint32_t DeviceAddress;
+ uint32_t deviceaddress;
UNUSED(hnand);
/* Identify the device address */
- DeviceAddress = NAND_DEVICE;
+ deviceaddress = NAND_DEVICE;
/* Send Read status operation command */
- *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_STATUS;
+ *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
/* Read status register data */
- data = *(__IO uint8_t *)DeviceAddress;
+ data = *(__IO uint8_t *)deviceaddress;
/* Return the status */
if ((data & NAND_ERROR) == NAND_ERROR)
diff --git a/Src/stm32l4xx_hal_nor.c b/Src/stm32l4xx_hal_nor.c
index f782294..2a69e4e 100644
--- a/Src/stm32l4xx_hal_nor.c
+++ b/Src/stm32l4xx_hal_nor.c
@@ -106,7 +106,7 @@
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @addtogroup STM32L4xx_HAL_Driver
* @{
@@ -473,9 +473,12 @@
{
/* Read the NOR IDs */
pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
- pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
- pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
- pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
+ pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE1_ADDR);
+ pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE2_ADDR);
+ pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE3_ADDR);
}
/* Check the NOR controller state */
@@ -740,7 +743,9 @@
HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData,
uint32_t uwBufferSize)
{
- uint32_t deviceaddress, size = uwBufferSize, address = uwAddress;
+ uint32_t deviceaddress;
+ uint32_t size = uwBufferSize;
+ uint32_t address = uwAddress;
uint16_t *data = pData;
HAL_NOR_StateTypeDef state;
HAL_StatusTypeDef status = HAL_OK;
@@ -871,7 +876,7 @@
/* Initialize variables */
p_currentaddress = (uint16_t *)(deviceaddress + uwAddress);
- p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U*(uwBufferSize - 1U)));
+ p_endaddress = (uint16_t *)(deviceaddress + uwAddress + (2U * (uwBufferSize - 1U)));
if (hnor->CommandSet == NOR_AMD_FUJITSU_COMMAND_SET)
{
@@ -901,7 +906,7 @@
while (p_currentaddress <= p_endaddress)
{
NOR_WRITE(p_currentaddress, *data);
-
+
data++;
p_currentaddress ++;
}
@@ -1390,7 +1395,8 @@
HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
{
HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
- uint16_t tmpSR1, tmpSR2;
+ uint16_t tmpsr1;
+ uint16_t tmpsr2;
uint32_t tickstart;
/* Poll on NOR memory Ready/Busy signal ------------------------------------*/
@@ -1415,29 +1421,29 @@
}
/* Read NOR status register (DQ6 and DQ5) */
- tmpSR1 = *(__IO uint16_t *)Address;
- tmpSR2 = *(__IO uint16_t *)Address;
+ tmpsr1 = *(__IO uint16_t *)Address;
+ tmpsr2 = *(__IO uint16_t *)Address;
/* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
- if ((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6))
{
return HAL_NOR_STATUS_SUCCESS ;
}
- if ((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
{
status = HAL_NOR_STATUS_ONGOING;
}
- tmpSR1 = *(__IO uint16_t *)Address;
- tmpSR2 = *(__IO uint16_t *)Address;
+ tmpsr1 = *(__IO uint16_t *)Address;
+ tmpsr2 = *(__IO uint16_t *)Address;
/* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
- if ((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ6) == (tmpsr2 & NOR_MASK_STATUS_DQ6))
{
return HAL_NOR_STATUS_SUCCESS;
}
- if ((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+ if ((tmpsr1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
{
return HAL_NOR_STATUS_ERROR;
}
@@ -1448,21 +1454,21 @@
do
{
NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
- tmpSR2 = *(__IO uint16_t*)(Address);
+ tmpsr2 = *(__IO uint16_t *)(Address);
/* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
+ if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
return HAL_NOR_STATUS_TIMEOUT;
}
}
- } while ((tmpSR2 & NOR_MASK_STATUS_DQ7) == 0U);
+ } while ((tmpsr2 & NOR_MASK_STATUS_DQ7) == 0U);
NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
- tmpSR1 = *(__IO uint16_t*)(Address);
- if((tmpSR1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U)
+ tmpsr1 = *(__IO uint16_t *)(Address);
+ if ((tmpsr1 & (NOR_MASK_STATUS_DQ5 | NOR_MASK_STATUS_DQ4)) != 0U)
{
/* Clear the Status Register */
NOR_WRITE(Address, NOR_CMD_READ_STATUS_REG);
diff --git a/Src/stm32l4xx_hal_pcd.c b/Src/stm32l4xx_hal_pcd.c
index 83554ac..b018874 100644
--- a/Src/stm32l4xx_hal_pcd.c
+++ b/Src/stm32l4xx_hal_pcd.c
@@ -241,7 +241,7 @@
{
(void)HAL_PCDEx_ActivateLPM(hpcd);
}
-
+
(void)USB_DevDisconnect(hpcd->Instance);
return HAL_OK;
@@ -335,7 +335,9 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd,
+ HAL_PCD_CallbackIDTypeDef CallbackID,
+ pPCD_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -545,7 +547,8 @@
* @param pCallback pointer to the USB PCD Data OUT Stage Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_DataOutStageCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -618,7 +621,8 @@
* @param pCallback pointer to the USB PCD Data IN Stage Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_DataInStageCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -691,7 +695,8 @@
* @param pCallback pointer to the USB PCD Iso OUT incomplete Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_IsoOutIncpltCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -764,7 +769,8 @@
* @param pCallback pointer to the USB PCD Iso IN incomplete Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd,
+ pPCD_IsoInIncpltCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -1254,7 +1260,7 @@
}
__HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
}
-
+
/* Handle LPM Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
{
@@ -1280,7 +1286,7 @@
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
}
-
+
/* Handle Reset Interrupt */
if (__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
{
@@ -1754,6 +1760,7 @@
#endif /* defined (USB_OTG_FS) */
__HAL_LOCK(hpcd);
+
#if defined (USB_OTG_FS)
if (hpcd->Init.battery_charging_enable == 1U)
{
@@ -1761,6 +1768,7 @@
USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN;
}
#endif /* defined (USB_OTG_FS) */
+
(void)USB_DevConnect(hpcd->Instance);
__HAL_UNLOCK(hpcd);
@@ -1817,7 +1825,8 @@
* @param ep_type endpoint type
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
+ uint16_t ep_mps, uint8_t ep_type)
{
HAL_StatusTypeDef ret = HAL_OK;
PCD_EPTypeDef *ep;
@@ -1996,10 +2005,12 @@
__HAL_LOCK(hpcd);
(void)USB_EPSetStall(hpcd->Instance, ep);
+
if ((ep_addr & EP_ADDR_MSK) == 0U)
{
(void)USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup);
}
+
__HAL_UNLOCK(hpcd);
return HAL_OK;
@@ -2279,6 +2290,7 @@
while ((hpcd->Instance->ISTR & USB_ISTR_CTR) != 0U)
{
wIstr = hpcd->Instance->ISTR;
+
/* extract highest priority endpoint number */
epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID);
@@ -2361,8 +2373,11 @@
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
- PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
- PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
+ if ((PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0) & USB_EP_SETUP) == 0U)
+ {
+ PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
+ }
}
}
}
@@ -2449,9 +2464,8 @@
/* clear int flag */
PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex);
- /* Manage all non bulk transaction or Bulk Single Buffer Transaction */
- if ((ep->type != EP_TYPE_BULK) ||
- ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U)))
+ /* Manage Bulk Single Buffer Transaction */
+ if ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U))
{
/* multi-packet on the NON control IN endpoint */
TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
@@ -2483,7 +2497,7 @@
(void)USB_EPStartXfer(hpcd->Instance, ep);
}
}
- /* bulk in double buffer enable in case of transferLen> Ep_Mps */
+ /* Double Buffer Iso/bulk IN (bulk transfer Len > Ep_Mps) */
else
{
(void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal);
@@ -2607,6 +2621,9 @@
/* Transfer is completed */
if (ep->xfer_len == 0U)
{
+ PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+
/* TX COMPLETE */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, ep->num);
@@ -2677,6 +2694,9 @@
/* Transfer is completed */
if (ep->xfer_len == 0U)
{
+ PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+
/* TX COMPLETE */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, ep->num);
@@ -2684,7 +2704,7 @@
HAL_PCD_DataInStageCallback(hpcd, ep->num);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
- /*need to Free USB Buff*/
+ /* need to Free USB Buff */
if ((wEPVal & USB_EP_DTOG_RX) == 0U)
{
PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U);
diff --git a/Src/stm32l4xx_hal_pcd_ex.c b/Src/stm32l4xx_hal_pcd_ex.c
index 0c75425..a32f1f4 100644
--- a/Src/stm32l4xx_hal_pcd_ex.c
+++ b/Src/stm32l4xx_hal_pcd_ex.c
@@ -310,10 +310,8 @@
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
- uint16_t ep_addr,
- uint16_t ep_kind,
- uint32_t pmaadress)
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr,
+ uint16_t ep_kind, uint32_t pmaadress)
{
PCD_EPTypeDef *ep;
diff --git a/Src/stm32l4xx_hal_rtc.c b/Src/stm32l4xx_hal_rtc.c
index 2fc1ff9..86c8335 100644
--- a/Src/stm32l4xx_hal_rtc.c
+++ b/Src/stm32l4xx_hal_rtc.c
@@ -824,10 +824,10 @@
/* Set the RTC_TR register */
WRITE_REG(RTC->TR, (tmpreg & RTC_TR_RESERVED_MASK));
- /* Clear the bits to be configured */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
CLEAR_BIT(RTC->CR, RTC_CR_BKP);
- /* Configure the RTC_CR register */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
SET_BIT(RTC->CR, (sTime->DayLightSaving | sTime->StoreOperation));
}
}
@@ -2124,6 +2124,10 @@
if (Alarm == RTC_ALARM_A)
{
/* AlarmA */
+#if defined (RTC_ALRMASSR_SSCLR)
+ CLEAR_BIT(RTC->ALRMASSR, RTC_ALRMASSR_SSCLR);
+#endif
+
__HAL_RTC_ALARMA_DISABLE(hrtc);
/* In case of interrupt mode is used, the interrupt source must disabled */
@@ -2152,6 +2156,10 @@
else
{
/* AlarmB */
+#if defined (RTC_ALRMBSSR_SSCLR)
+ CLEAR_BIT(RTC->ALRMBSSR, RTC_ALRMASSR_SSCLR);
+#endif
+
__HAL_RTC_ALARMB_DISABLE(hrtc);
/* In case of interrupt mode is used, the interrupt source must disabled */
@@ -2257,6 +2265,73 @@
return HAL_OK;
}
+
+/**
+ * @brief Daylight Saving Time, Add one hour to the calendar in one single operation
+ * without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc)
+{
+ UNUSED(hrtc);
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(RTC->CR, RTC_CR_ADD1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Substract one hour from the calendar in one
+ * single operation without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc)
+{
+ UNUSED(hrtc);
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(RTC->CR, RTC_CR_SUB1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Set the store operation bit.
+ * @note It can be used by the software in order to memorize the DST status.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ UNUSED(hrtc);
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(RTC->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Clear the store operation bit.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ UNUSED(hrtc);
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ CLEAR_BIT(RTC->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Read the store operation bit.
+ * @param hrtc RTC handle
+ * @retval operation see RTC_StoreOperation_Definitions
+ */
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ UNUSED(hrtc);
+ return READ_BIT(RTC->CR, RTC_CR_BKP);
+}
+
/**
* @brief Handle Alarm interrupt request.
* @param hrtc RTC handle
diff --git a/Src/stm32l4xx_hal_sd.c b/Src/stm32l4xx_hal_sd.c
index 3f993d3..baa3f7c 100644
--- a/Src/stm32l4xx_hal_sd.c
+++ b/Src/stm32l4xx_hal_sd.c
@@ -288,7 +288,10 @@
/** @addtogroup SD_Private_Defines
* @{
*/
-
+/* Frequencies used in the driver for clock divider calculation */
+#define SD_INIT_FREQ 400000U /* Initalization phase : 400 kHz max */
+#define SD_NORMAL_SPEED_FREQ 25000000U /* Normal speed phase : 25 MHz max */
+#define SD_HIGH_SPEED_FREQ 50000000U /* High speed phase : 50 MHz max */
/**
* @}
*/
@@ -453,6 +456,7 @@
{
hsd->ErrorCode = HAL_SD_ERROR_TIMEOUT;
hsd->State= HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
return HAL_TIMEOUT;
}
}
@@ -502,12 +506,13 @@
return HAL_ERROR;
}
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- Init.ClockDiv = ((sdmmc_clk/400000U) - 2U);
+ Init.ClockDiv = ((sdmmc_clk / SD_INIT_FREQ) - 2U);
#else
- Init.ClockDiv = sdmmc_clk/(2U*400000U);
+ Init.ClockDiv = sdmmc_clk / (2U * SD_INIT_FREQ);
#endif
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+ Init.Transceiver = hsd->Init.Transceiver;
if(hsd->Init.Transceiver == SDMMC_TRANSCEIVER_ENABLE)
{
/* Set Transceiver polarity */
@@ -2381,7 +2386,7 @@
* @brief Returns information the information of the card which are stored on
* the CID register.
* @param hsd Pointer to SD handle
- * @param pCID Pointer to a HAL_SD_CardCIDTypeDef structure that
+ * @param pCID Pointer to a HAL_SD_CardCIDTypeDef structure that
* contains all CID register parameters
* @retval HAL status
*/
@@ -2414,7 +2419,7 @@
* @brief Returns information the information of the card which are stored on
* the CSD register.
* @param hsd Pointer to SD handle
- * @param pCSD Pointer to a HAL_SD_CardCSDTypeDef structure that
+ * @param pCSD Pointer to a HAL_SD_CardCSDTypeDef structure that
* contains all CSD register parameters
* @retval HAL status
*/
@@ -2528,7 +2533,7 @@
/**
* @brief Gets the SD status info.
* @param hsd Pointer to SD handle
- * @param pStatus Pointer to the HAL_SD_CardStatusTypeDef structure that
+ * @param pStatus Pointer to the HAL_SD_CardStatusTypeDef structure that
* will contain the SD card status information
* @retval HAL status
*/
@@ -2627,6 +2632,7 @@
{
SDMMC_InitTypeDef Init;
uint32_t errorstate;
+ uint32_t sdmmc_clk;
HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
@@ -2673,41 +2679,101 @@
}
else
{
- /* Configure the SDMMC peripheral */
- Init.ClockEdge = hsd->Init.ClockEdge;
+ sdmmc_clk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SDMMC1);
+ if (sdmmc_clk != 0U)
+ {
+ /* Configure the SDMMC peripheral */
+ Init.ClockEdge = hsd->Init.ClockEdge;
#if !defined(STM32L4P5xx) && !defined(STM32L4Q5xx) && !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx)
- Init.ClockBypass = hsd->Init.ClockBypass;
+ Init.ClockBypass = hsd->Init.ClockBypass;
#endif /* !STM32L4P5xx && !STM32L4Q5xx && !STM32L4R5xx && !STM32L4R7xx && !STM32L4R9xx && !STM32L4S5xx && !STM32L4S7xx && !STM32L4S9xx */
- Init.ClockPowerSave = hsd->Init.ClockPowerSave;
- Init.BusWide = WideMode;
- Init.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+ Init.ClockPowerSave = hsd->Init.ClockPowerSave;
+ Init.BusWide = WideMode;
+ Init.HardwareFlowControl = hsd->Init.HardwareFlowControl;
#if defined(STM32L4P5xx) || defined(STM32L4Q5xx) || defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
- /* Check if user Clock div < Normal speed 25Mhz, no change in Clockdiv */
- if(hsd->Init.ClockDiv >= SDMMC_NSpeed_CLK_DIV)
- {
- Init.ClockDiv = hsd->Init.ClockDiv;
- }
- else if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED)
- {
- /* UltraHigh speed SD card,user Clock div */
- Init.ClockDiv = hsd->Init.ClockDiv;
- }
- else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED)
- {
- /* High speed SD card, Max Frequency = 50Mhz */
- Init.ClockDiv = SDMMC_HSpeed_CLK_DIV;
+ /* Check if user Clock div < Normal speed 25Mhz, no change in Clockdiv */
+ if (hsd->Init.ClockDiv >= (sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ)))
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ else if (hsd->SdCard.CardSpeed == CARD_ULTRA_HIGH_SPEED)
+ {
+ /* UltraHigh speed SD card,user Clock div */
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ else if (hsd->SdCard.CardSpeed == CARD_HIGH_SPEED)
+ {
+ /* High speed SD card, Max Frequency = 50Mhz */
+ if (hsd->Init.ClockDiv == 0U)
+ {
+ if (sdmmc_clk > SD_HIGH_SPEED_FREQ)
+ {
+ Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ);
+ }
+ else
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ }
+ else
+ {
+ if ((sdmmc_clk/(2U * hsd->Init.ClockDiv)) > SD_HIGH_SPEED_FREQ)
+ {
+ Init.ClockDiv = sdmmc_clk / (2U * SD_HIGH_SPEED_FREQ);
+ }
+ else
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ }
+ }
+ else
+ {
+ /* No High speed SD card, Max Frequency = 25Mhz */
+ if (hsd->Init.ClockDiv == 0U)
+ {
+ if (sdmmc_clk > SD_NORMAL_SPEED_FREQ)
+ {
+ Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ);
+ }
+ else
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ }
+ else
+ {
+ if ((sdmmc_clk/(2U * hsd->Init.ClockDiv)) > SD_NORMAL_SPEED_FREQ)
+ {
+ Init.ClockDiv = sdmmc_clk / (2U * SD_NORMAL_SPEED_FREQ);
+ }
+ else
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+ }
+ }
+
+ Init.Transceiver = hsd->Init.Transceiver;
+#else
+ if ((sdmmc_clk / (Init.ClockDiv + 2U)) > SD_NORMAL_SPEED_FREQ)
+ {
+ Init.ClockDiv = ((sdmmc_clk / SD_NORMAL_SPEED_FREQ) - 2U);
+ }
+ else
+ {
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ }
+#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+ (void)SDMMC_Init(hsd->Instance, Init);
}
else
{
- /* No High speed SD card, Max Frequency = 25Mhz */
- Init.ClockDiv = SDMMC_NSpeed_CLK_DIV;
+ hsd->ErrorCode |= SDMMC_ERROR_INVALID_PARAMETER;
+ status = HAL_ERROR;
}
-#else
- Init.ClockDiv = hsd->Init.ClockDiv;
-#endif /* STM32L4P5xx || STM32L4Q5xx || STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
-
- (void)SDMMC_Init(hsd->Instance, Init);
}
/* Set Block Size for Card */
@@ -2925,7 +2991,7 @@
return HAL_TIMEOUT;
}
}
-
+
/* Set Block Size for Card */
errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
if(errorstate != HAL_SD_ERROR_NONE)
diff --git a/Src/stm32l4xx_hal_smartcard.c b/Src/stm32l4xx_hal_smartcard.c
index 1597190..5e694ce 100644
--- a/Src/stm32l4xx_hal_smartcard.c
+++ b/Src/stm32l4xx_hal_smartcard.c
@@ -2437,7 +2437,7 @@
SMARTCARD_ClockSourceTypeDef clocksource;
HAL_StatusTypeDef ret = HAL_OK;
#if defined(USART_PRESC_PRESCALER)
- const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
+ static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
#endif /* USART_PRESC_PRESCALER */
uint32_t pclk;
@@ -2465,12 +2465,7 @@
* Configure the Parity and Mode:
* set PS bit according to hsmartcard->Init.Parity value
* set TE and RE bits according to hsmartcard->Init.Mode value */
-#if defined(USART_CR1_FIFOEN)
- tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode;
- tmpreg |= (uint32_t) hsmartcard->Init.WordLength | hsmartcard->FifoMode;
-#else
tmpreg = (uint32_t)(hsmartcard->Init.Parity | hsmartcard->Init.Mode | hsmartcard->Init.WordLength);
-#endif /* USART_CR1_FIFOEN */
MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
/*-------------------------- USART CR2 Configuration -----------------------*/
diff --git a/Src/stm32l4xx_hal_smartcard_ex.c b/Src/stm32l4xx_hal_smartcard_ex.c
index b52dffc..04ef543 100644
--- a/Src/stm32l4xx_hal_smartcard_ex.c
+++ b/Src/stm32l4xx_hal_smartcard_ex.c
@@ -465,8 +465,8 @@
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
/* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE)
{
diff --git a/Src/stm32l4xx_hal_smbus_ex.c b/Src/stm32l4xx_hal_smbus_ex.c
new file mode 100644
index 0000000..59c78b6
--- /dev/null
+++ b/Src/stm32l4xx_hal_smbus_ex.c
@@ -0,0 +1,156 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_smbus_ex.c
+ * @author MCD Application Team
+ * @brief SMBUS Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of SMBUS Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SMBUS peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the SMBUS interface for STM32L4xx
+ devices contains the following additional features
+
+ (+) Disable or enable Fast Mode Plus
+
+ ##### How to use this driver #####
+ ==============================================================================
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_SMBUSEx_EnableFastModePlus()
+ (++) HAL_SMBUSEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMBUSEx SMBUSEx
+ * @brief SMBUS Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup SMBUSEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+ (+) Configure Fast Mode Plus
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable the SMBUS fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref SMBUSEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be enabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the SMBUS fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref SMBUSEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C3 parameter.
+ * @note For all I2C4 pins fast mode plus driving capability can be disabled
+ * only by using I2C_FASTMODEPLUS_I2C4 parameter.
+ * @retval None
+ */
+void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Src/stm32l4xx_hal_spi.c b/Src/stm32l4xx_hal_spi.c
index 32b9083..25f60fd 100644
--- a/Src/stm32l4xx_hal_spi.c
+++ b/Src/stm32l4xx_hal_spi.c
@@ -1007,6 +1007,9 @@
*/
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
uint32_t tickstart;
HAL_StatusTypeDef errorcode = HAL_OK;
@@ -1173,12 +1176,16 @@
if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
{
@@ -1190,7 +1197,9 @@
goto error;
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
}
}
@@ -1235,6 +1244,9 @@
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
uint32_t Timeout)
{
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
uint16_t initial_TxXferCount;
uint16_t initial_RxXferCount;
uint32_t tmp_mode;
@@ -1476,12 +1488,16 @@
if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
{
@@ -1493,7 +1509,9 @@
goto error;
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
}
}
@@ -3048,6 +3066,9 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -3072,12 +3093,16 @@
if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
{
@@ -3087,7 +3112,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
}
}
@@ -3152,6 +3179,9 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -3175,7 +3205,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read CRC to Flush DR and RXNE flag */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
@@ -3185,7 +3217,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read CRC to Flush DR and RXNE flag */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
}
#endif /* USE_SPI_CRC */
@@ -3520,8 +3554,12 @@
*/
static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
hspi->CRCSize--;
@@ -3628,8 +3666,12 @@
*/
static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE interrupt */
__HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
@@ -3684,8 +3726,12 @@
*/
static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg = READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
hspi->CRCSize--;
@@ -3738,8 +3784,12 @@
*/
static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE and ERR interrupt */
__HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
@@ -3914,6 +3964,7 @@
static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State,
uint32_t Timeout, uint32_t Tickstart)
{
+ __IO uint32_t tmpreg;
__IO uint32_t count;
uint32_t tmp_timeout;
uint32_t tmp_tickstart;
@@ -3929,8 +3980,10 @@
{
if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY))
{
- /* Read 8bit CRC to flush Data Register */
- READ_REG(*((__IO uint8_t *)&hspi->Instance->DR));
+ /* Flush Data Register by a blank read */
+ tmpreg = READ_REG(*((__IO uint8_t *)&hspi->Instance->DR));
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
if (Timeout != HAL_MAX_DELAY)
diff --git a/Src/stm32l4xx_hal_sram.c b/Src/stm32l4xx_hal_sram.c
index c9a49d2..444a501 100644
--- a/Src/stm32l4xx_hal_sram.c
+++ b/Src/stm32l4xx_hal_sram.c
@@ -115,7 +115,7 @@
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @addtogroup STM32L4xx_HAL_Driver
* @{
@@ -128,9 +128,6 @@
* @{
*/
-/**
- @cond 0
- */
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
@@ -139,9 +136,6 @@
static void SRAM_DMACplt(DMA_HandleTypeDef *hdma);
static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma);
static void SRAM_DMAError(DMA_HandleTypeDef *hdma);
-/**
- @endcond
- */
/* Exported functions --------------------------------------------------------*/
@@ -198,7 +192,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_SRAM_MspInit(hsram);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/* Initialize SRAM control Interface */
@@ -209,7 +203,7 @@
/* Initialize SRAM extended mode timing Interface */
(void)FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank,
- hsram->Init.ExtendedMode);
+ hsram->Init.ExtendedMode);
/* Enable the NORSRAM device */
__FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
@@ -239,7 +233,7 @@
#else
/* De-Initialize the low level hardware (MSP) */
HAL_SRAM_MspDeInit(hsram);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/* Configure the SRAM registers with their reset values */
(void)FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
@@ -687,7 +681,7 @@
}
else
{
- return HAL_ERROR;
+ status = HAL_ERROR;
}
return status;
@@ -728,7 +722,7 @@
}
else
{
- return HAL_ERROR;
+ status = HAL_ERROR;
}
return status;
@@ -910,7 +904,7 @@
__HAL_UNLOCK(hsram);
return status;
}
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
@@ -1038,9 +1032,6 @@
*/
/**
- @cond 0
- */
-/**
* @brief DMA SRAM process complete callback.
* @param hdma : DMA handle
* @retval None
@@ -1059,7 +1050,7 @@
hsram->DmaXferCpltCallback(hdma);
#else
HAL_SRAM_DMA_XferCpltCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/**
@@ -1081,7 +1072,7 @@
hsram->DmaXferCpltCallback(hdma);
#else
HAL_SRAM_DMA_XferCpltCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/**
@@ -1103,11 +1094,8 @@
hsram->DmaXferErrorCallback(hdma);
#else
HAL_SRAM_DMA_XferErrorCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
-/**
- @endcond
- */
/**
* @}
diff --git a/Src/stm32l4xx_hal_tim.c b/Src/stm32l4xx_hal_tim.c
index 89eb3df..9ebce6e 100644
--- a/Src/stm32l4xx_hal_tim.c
+++ b/Src/stm32l4xx_hal_tim.c
@@ -504,7 +504,7 @@
{
/* Check the parameters */
assert_param(IS_TIM_INSTANCE(htim->Instance));
-
+
/* Disable the TIM Update interrupt */
__HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
@@ -563,6 +563,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
@@ -1079,6 +1080,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
@@ -1099,6 +1101,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
@@ -1119,6 +1122,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 3 DMA request */
@@ -1138,6 +1142,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 4 DMA request */
@@ -1715,6 +1720,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
@@ -1735,6 +1741,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 2 DMA request */
@@ -1754,6 +1761,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Output Capture/Compare 3 request */
@@ -1773,6 +1781,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 4 DMA request */
@@ -2068,7 +2077,7 @@
/* Check the TIM channel state */
if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -2150,7 +2159,7 @@
/* Check the TIM channel state */
if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -2302,12 +2311,12 @@
/* Set the TIM channel state */
if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY))
{
return HAL_BUSY;
}
else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY))
+ && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY))
{
if ((pData == NULL) && (Length > 0U))
{
@@ -2324,6 +2333,23 @@
return HAL_ERROR;
}
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
switch (Channel)
{
case TIM_CHANNEL_1:
@@ -2338,6 +2364,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 1 DMA request */
@@ -2357,6 +2384,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 2 DMA request */
@@ -2376,6 +2404,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 3 DMA request */
@@ -2395,6 +2424,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 4 DMA request */
@@ -2406,23 +2436,6 @@
break;
}
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
- if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
- {
- tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
- if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
- {
- __HAL_TIM_ENABLE(htim);
- }
- }
- else
- {
- __HAL_TIM_ENABLE(htim);
- }
-
/* Return function status */
return HAL_OK;
}
@@ -2677,11 +2690,12 @@
/**
* @brief Starts the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2696,9 +2710,9 @@
/* Check the TIM channels state */
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -2713,7 +2727,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2733,11 +2747,12 @@
/**
* @brief Stops the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be disable
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2749,7 +2764,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -2775,11 +2790,12 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2794,9 +2810,9 @@
/* Check the TIM channels state */
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -2811,7 +2827,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2837,11 +2853,12 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2859,7 +2876,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -3131,7 +3148,7 @@
if (Channel == TIM_CHANNEL_1)
{
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3144,7 +3161,7 @@
else if (Channel == TIM_CHANNEL_2)
{
if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3157,9 +3174,9 @@
else
{
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3249,7 +3266,7 @@
TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
}
- else
+ else
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -3285,7 +3302,7 @@
if (Channel == TIM_CHANNEL_1)
{
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3298,7 +3315,7 @@
else if (Channel == TIM_CHANNEL_2)
{
if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3311,9 +3328,9 @@
else
{
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -3411,7 +3428,7 @@
TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
}
- else
+ else
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -3451,12 +3468,12 @@
if (Channel == TIM_CHANNEL_1)
{
if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
{
return HAL_BUSY;
}
else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
{
if ((pData1 == NULL) && (Length > 0U))
{
@@ -3476,12 +3493,12 @@
else if (Channel == TIM_CHANNEL_2)
{
if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
{
return HAL_BUSY;
}
else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+ && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
{
if ((pData2 == NULL) && (Length > 0U))
{
@@ -3501,16 +3518,16 @@
else
{
if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
- || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
{
return HAL_BUSY;
}
else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
- && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+ && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
{
if ((((pData1 == NULL) || (pData2 == NULL))) && (Length > 0U))
{
@@ -3544,6 +3561,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Input Capture DMA request */
@@ -3568,6 +3586,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Input Capture DMA request */
@@ -3593,6 +3612,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
@@ -3606,6 +3626,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the Peripheral */
@@ -3684,7 +3705,7 @@
TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
}
- else
+ else
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -4523,8 +4544,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4540,8 +4562,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4557,8 +4580,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4574,8 +4598,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4591,8 +4616,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4608,8 +4634,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4625,8 +4652,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer,
- (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4652,7 +4680,6 @@
*/
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
{
- HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
@@ -4676,7 +4703,7 @@
}
case TIM_DMA_CC3:
{
- status = HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
break;
}
case TIM_DMA_CC4:
@@ -4698,17 +4725,14 @@
break;
}
- if (HAL_OK == status)
- {
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
- }
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
/* Change the DMA burst operation state */
htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
/* Return function status */
- return status;
+ return HAL_OK;
}
/**
@@ -4850,8 +4874,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4867,8 +4892,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4884,8 +4910,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4901,8 +4928,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4918,8 +4946,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4935,8 +4964,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4952,8 +4982,9 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
- DataLength) != HAL_OK)
+ DataLength) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
break;
@@ -4980,7 +5011,6 @@
*/
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
{
- HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
@@ -5026,17 +5056,14 @@
break;
}
- if (HAL_OK == status)
- {
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
- }
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
/* Change the DMA burst operation state */
htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
/* Return function status */
- return status;
+ return HAL_OK;
}
/**
@@ -6354,12 +6381,12 @@
HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel)
{
HAL_TIM_ChannelStateTypeDef channel_state;
-
+
/* Check the parameters */
assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
-
+
return channel_state;
}
@@ -6372,7 +6399,7 @@
{
/* Check the parameters */
assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
-
+
return htim->DMABurstState;
}
@@ -6436,14 +6463,14 @@
* @param hdma pointer to DMA handle.
* @retval None
*/
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
{
TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
if (hdma == htim->hdma[TIM_DMA_ID_CC1])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
@@ -6452,7 +6479,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -6461,7 +6488,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
@@ -6470,7 +6497,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
@@ -6541,7 +6568,7 @@
if (hdma == htim->hdma[TIM_DMA_ID_CC1])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
@@ -6551,7 +6578,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -6561,7 +6588,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
@@ -6571,7 +6598,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
diff --git a/Src/stm32l4xx_hal_tim_ex.c b/Src/stm32l4xx_hal_tim_ex.c
index 3c02266..db658a7 100644
--- a/Src/stm32l4xx_hal_tim_ex.c
+++ b/Src/stm32l4xx_hal_tim_ex.c
@@ -323,9 +323,9 @@
/* Check the TIM channels state */
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -335,7 +335,7 @@
TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
-
+
/* Enable the Input Capture channel 1
(in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
@@ -403,9 +403,9 @@
/* Check the TIM channels state */
if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
- || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
@@ -489,12 +489,12 @@
/* Set the TIM channel state */
if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
- ||(complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
{
return HAL_BUSY;
}
else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
- && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
{
if ((pData == NULL) && (Length > 0U))
{
@@ -524,6 +524,7 @@
/* Enable the DMA channel for Capture 1*/
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the capture compare 1 Interrupt */
@@ -625,7 +626,7 @@
{
return HAL_ERROR;
}
-
+
/* Set the TIM complementary channel state */
TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
@@ -889,6 +890,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Output Compare DMA request */
@@ -908,6 +910,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Output Compare DMA request */
@@ -927,6 +930,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Output Compare DMA request */
@@ -1343,6 +1347,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 1 DMA request */
@@ -1362,6 +1367,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 2 DMA request */
@@ -1381,6 +1387,7 @@
/* Enable the DMA channel */
if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
{
+ /* Return error status */
return HAL_ERROR;
}
/* Enable the TIM Capture/Compare 3 DMA request */
@@ -1503,8 +1510,10 @@
/**
* @brief Starts the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1513,22 +1522,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the complementary One Pulse output channel and the Input Capture channel */
TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
@@ -1544,8 +1559,10 @@
/**
* @brief Stops the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1569,8 +1586,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
@@ -1579,8 +1598,10 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1589,22 +1610,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the TIM Capture/Compare 1 interrupt */
__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
@@ -1626,8 +1653,10 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1657,8 +1686,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
@@ -2552,12 +2583,12 @@
HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN)
{
HAL_TIM_ChannelStateTypeDef channel_state;
-
+
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN));
channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN);
-
+
return channel_state;
}
/**
@@ -2624,7 +2655,7 @@
if (hdma == htim->hdma[TIM_DMA_ID_CC1])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
@@ -2633,7 +2664,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
@@ -2642,7 +2673,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
@@ -2651,7 +2682,7 @@
else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
{
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
-
+
if (hdma->Init.Mode == DMA_NORMAL)
{
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
@@ -2676,7 +2707,7 @@
* @param hdma pointer to DMA handle.
* @retval None
*/
-void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma)
+static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma)
{
TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
@@ -2699,13 +2730,13 @@
{
/* nothing to do */
}
-
+
#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
htim->ErrorCallback(htim);
#else
HAL_TIM_ErrorCallback(htim);
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
-
+
htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
}
diff --git a/Src/stm32l4xx_hal_timebase_tim_template.c b/Src/stm32l4xx_hal_timebase_tim_template.c
index d5b9110..4858c4e 100644
--- a/Src/stm32l4xx_hal_timebase_tim_template.c
+++ b/Src/stm32l4xx_hal_timebase_tim_template.c
@@ -1,15 +1,15 @@
/**
******************************************************************************
- * @file stm32l4xx_hal_timebase_tim_template.c
+ * @file stm32l4xx_hal_timebase_tim_template.c
* @author MCD Application Team
* @brief HAL time base based on the hardware TIM Template.
- *
- * This file override the native HAL time base functions (defined as weak)
+ *
+ * This file overrides the native HAL time base functions (defined as weak)
* the TIM time base:
- * + Intializes the TIM peripheral to generate a Period elapsed Event each 1ms
+ * + Initializes the TIM peripheral to generate a Period elapsed Event each 1ms
* + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms
- *
- @verbatim
+ *
+ @verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
@@ -17,7 +17,7 @@
This file must be copied to the application folder and modified as follows:
(#) Rename it to 'stm32l4xx_hal_timebase_tim.c'
(#) Add this file and the TIM HAL driver files to your project and make sure
- HAL_TIM_MODULE_ENABLED is defined in stm32l4xx_hal_conf.h
+ HAL_TIM_MODULE_ENABLED is defined in stm32l4xx_hal_conf.h
[..]
(@) The application needs to ensure that the time base is always set to 1 millisecond
@@ -59,77 +59,103 @@
/* Private functions ---------------------------------------------------------*/
/**
- * @brief This function configures the TIM6 as a time base source.
- * The time source is configured to have 1ms time base with a dedicated
- * Tick interrupt priority.
+ * @brief This function configures the TIM6 as a time base source.
+ * The time source is configured to have 1ms time base with a dedicated
+ * Tick interrupt priority.
* @note This function is called automatically at the beginning of program after
- * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
+ * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
* @param TickPriority Tick interrupt priority.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
RCC_ClkInitTypeDef clkconfig;
- uint32_t uwTimclock, uwAPB1Prescaler = 0U;
- uint32_t uwPrescalerValue = 0U;
+ uint32_t uwTimclock, uwAPB1Prescaler;
+ uint32_t uwPrescalerValue;
uint32_t pFLatency;
-
- /* Configure the TIM6 IRQ priority */
- HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority, 0U);
-
- /* Enable the TIM6 global Interrupt */
- HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
-
- /* Enable TIM6 clock */
- __HAL_RCC_TIM6_CLK_ENABLE();
-
- /* Get clock configuration */
- HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
-
- /* Get APB1 prescaler */
- uwAPB1Prescaler = clkconfig.APB1CLKDivider;
-
- /* Compute TIM6 clock */
- if (uwAPB1Prescaler == RCC_HCLK_DIV1)
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/
+ if ((uint32_t)uwTickFreq != 0U)
{
- uwTimclock = HAL_RCC_GetPCLK1Freq();
+ /* Enable TIM6 clock */
+ __HAL_RCC_TIM6_CLK_ENABLE();
+
+ /* Get clock configuration */
+ HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
+
+ /* Get APB1 prescaler */
+ uwAPB1Prescaler = clkconfig.APB1CLKDivider;
+
+ /* Compute TIM6 clock */
+ if (uwAPB1Prescaler == RCC_HCLK_DIV1)
+ {
+ uwTimclock = HAL_RCC_GetPCLK1Freq();
+ }
+ else
+ {
+ uwTimclock = 2U * HAL_RCC_GetPCLK1Freq();
+ }
+
+ /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
+ uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
+
+ /* Initialize TIM6 */
+ TimHandle.Instance = TIM6;
+
+ /* Initialize TIMx peripheral as follows:
+ + Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base.
+ + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+ + ClockDivision = 0
+ + Counter direction = Up
+ */
+ TimHandle.Init.Period = (1000000U / 1000U) - 1U;
+ TimHandle.Init.Prescaler = uwPrescalerValue;
+ TimHandle.Init.ClockDivision = 0;
+ TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+ TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&TimHandle) == HAL_OK)
+ {
+ /* Start the TIM time Base generation in interrupt mode */
+ if (HAL_TIM_Base_Start_IT(&TimHandle) == HAL_OK)
+ {
+ /* Enable the TIM6_DAC global Interrupt */
+ HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
+
+ /* Configure the SysTick IRQ priority */
+ if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+ {
+ /*Configure the TIM6_DAC IRQ priority */
+ HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority ,0U);
+ uwTickPrio = TickPriority;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
}
else
{
- uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
+ status = HAL_ERROR;
}
-
- /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
- uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
-
- /* Initialize TIM6 */
- TimHandle.Instance = TIM6;
-
- /* Initialize TIMx peripheral as follow:
- + Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base.
- + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
- + ClockDivision = 0
- + Counter direction = Up
- */
- TimHandle.Init.Period = (1000000U / 1000U) - 1U;
- TimHandle.Init.Prescaler = uwPrescalerValue;
- TimHandle.Init.ClockDivision = 0;
- TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
- TimHandle.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if(HAL_TIM_Base_Init(&TimHandle) == HAL_OK)
- {
- /* Start the TIM time Base generation in interrupt mode */
- return HAL_TIM_Base_Start_IT(&TimHandle);
- }
-
+
/* Return function status */
- return HAL_ERROR;
+ return status;
}
/**
* @brief Suspend Tick increment.
* @note Disable the tick increment by disabling TIM6 update interrupt.
- * @param None
* @retval None
*/
void HAL_SuspendTick(void)
@@ -141,7 +167,6 @@
/**
* @brief Resume Tick increment.
* @note Enable the tick increment by enabling TIM6 update interrupt.
- * @param None
* @retval None
*/
void HAL_ResumeTick(void)
@@ -155,17 +180,19 @@
* @note This function is called when TIM6 interrupt took place, inside
* HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
* a global variable "uwTick" used as application time base.
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval None
*/
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
HAL_IncTick();
}
/**
* @brief This function handles TIM interrupt request.
- * @param None
* @retval None
*/
void TIM6_DAC_IRQHandler(void)
diff --git a/Src/stm32l4xx_hal_tsc.c b/Src/stm32l4xx_hal_tsc.c
index 90311d2..2abff4a 100644
--- a/Src/stm32l4xx_hal_tsc.c
+++ b/Src/stm32l4xx_hal_tsc.c
@@ -258,6 +258,7 @@
assert_param(IS_TSC_SSD(htsc->Init.SpreadSpectrumDeviation));
assert_param(IS_TSC_SS_PRESC(htsc->Init.SpreadSpectrumPrescaler));
assert_param(IS_TSC_PG_PRESC(htsc->Init.PulseGeneratorPrescaler));
+ assert_param(IS_TSC_PG_PRESC_VS_CTPL(htsc->Init.PulseGeneratorPrescaler, htsc->Init.CTPulseLowLength));
assert_param(IS_TSC_MCV(htsc->Init.MaxCountValue));
assert_param(IS_TSC_IODEF(htsc->Init.IODefaultMode));
assert_param(IS_TSC_SYNC_POL(htsc->Init.SynchroPinPolarity));
@@ -431,7 +432,8 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_TSC_RegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID, pTSC_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_TSC_RegisterCallback(TSC_HandleTypeDef *htsc, HAL_TSC_CallbackIDTypeDef CallbackID,
+ pTSC_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
diff --git a/Src/stm32l4xx_hal_uart.c b/Src/stm32l4xx_hal_uart.c
index fe3b440..7ccc5f9 100644
--- a/Src/stm32l4xx_hal_uart.c
+++ b/Src/stm32l4xx_hal_uart.c
@@ -39,7 +39,8 @@
(+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
(+++) Configure the DMA Tx/Rx channel.
(+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Tx/Rx channel.
(#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware
flow control and Mode (Receiver/Transmitter) in the huart handle Init structure.
@@ -86,8 +87,10 @@
(+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
(+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
(+) WakeupCallback : Wakeup Callback.
+#if defined(USART_CR1_FIFOEN)
(+) RxFifoFullCallback : Rx Fifo Full Callback.
(+) TxFifoEmptyCallback : Tx Fifo Empty Callback.
+#endif
(+) MspInitCallback : UART MspInit.
(+) MspDeInitCallback : UART MspDeInit.
This function takes as parameters the HAL peripheral handle, the Callback ID
@@ -108,12 +111,18 @@
(+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
(+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
(+) WakeupCallback : Wakeup Callback.
+#if defined(USART_CR1_FIFOEN)
(+) RxFifoFullCallback : Rx Fifo Full Callback.
(+) TxFifoEmptyCallback : Tx Fifo Empty Callback.
+#endif
(+) MspInitCallback : UART MspInit.
(+) MspDeInitCallback : UART MspDeInit.
[..]
+ For specific callback RxEventCallback, use dedicated registration/reset functions:
+ respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback().
+
+ [..]
By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET
all callbacks are set to the corresponding weak (surcharged) functions:
examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback().
@@ -660,6 +669,7 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->gState = HAL_UART_STATE_RESET;
huart->RxState = HAL_UART_STATE_RESET;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
__HAL_UNLOCK(huart);
@@ -712,8 +722,10 @@
* @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
* @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
* @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID
+#if defined(USART_CR1_FIFOEN)
* @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID
* @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID
+#endif
* @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID
* @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID
* @param pCallback pointer to the Callback function
@@ -844,8 +856,10 @@
* @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
* @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
* @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID
+#if defined(USART_CR1_FIFOEN)
* @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID
* @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID
+#endif
* @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID
* @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID
* @retval HAL status
@@ -861,57 +875,59 @@
switch (CallbackID)
{
case HAL_UART_TX_HALFCOMPLETE_CB_ID :
- huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
+ huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
break;
case HAL_UART_TX_COMPLETE_CB_ID :
- huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */
break;
case HAL_UART_RX_HALFCOMPLETE_CB_ID :
- huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
+ huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
break;
case HAL_UART_RX_COMPLETE_CB_ID :
- huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */
break;
case HAL_UART_ERROR_CB_ID :
- huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */
+ huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */
break;
case HAL_UART_ABORT_COMPLETE_CB_ID :
- huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
break;
case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID :
- huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */
+ huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak
+ AbortTransmitCpltCallback */
break;
case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID :
- huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */
+ huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak
+ AbortReceiveCpltCallback */
break;
case HAL_UART_WAKEUP_CB_ID :
- huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */
+ huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */
break;
#if defined(USART_CR1_FIFOEN)
case HAL_UART_RX_FIFO_FULL_CB_ID :
- huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
+ huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
break;
case HAL_UART_TX_FIFO_EMPTY_CB_ID :
- huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
+ huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
break;
#endif /* USART_CR1_FIFOEN */
case HAL_UART_MSPINIT_CB_ID :
- huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */
+ huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */
break;
case HAL_UART_MSPDEINIT_CB_ID :
- huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */
+ huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */
break;
default :
@@ -951,6 +967,74 @@
return status;
}
+
+/**
+ * @brief Register a User UART Rx Event Callback
+ * To be used instead of the weak predefined callback
+ * @param huart Uart handle
+ * @param pCallback Pointer to the Rx Event Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(huart);
+
+ if (huart->gState == HAL_UART_STATE_READY)
+ {
+ huart->RxEventCallback = pCallback;
+ }
+ else
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(huart);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister the UART Rx Event Callback
+ * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback
+ * @param huart Uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(huart);
+
+ if (huart->gState == HAL_UART_STATE_READY)
+ {
+ huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */
+ }
+ else
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(huart);
+ return status;
+}
+
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
@@ -1016,16 +1100,22 @@
(+) HAL_UART_AbortTransmitCpltCallback()
(+) HAL_UART_AbortReceiveCpltCallback()
+ (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services:
+ (+) HAL_UARTEx_RxEventCallback()
+
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
Errors are handled as follows :
(+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
- to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
- Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
- and HAL_UART_ErrorCallback() user callback is executed. Transfer is kept ongoing on UART side.
+ to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error
+ in Interrupt mode reception .
+ Received character is then retrieved and stored in Rx buffer, Error code is set to allow user
+ to identify error type, and HAL_UART_ErrorCallback() user callback is executed.
+ Transfer is kept ongoing on UART side.
If user wants to abort it, Abort services should be called by user.
(+) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
- Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() user callback is executed.
+ Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback()
+ user callback is executed.
-@- In the Half duplex communication, it is forbidden to run the transmit
and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful.
@@ -1068,7 +1158,7 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->gState = HAL_UART_STATE_BUSY_TX;
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
huart->TxXferSize = Size;
@@ -1157,8 +1247,9 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->RxState = HAL_UART_STATE_BUSY_RX;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
huart->RxXferSize = Size;
@@ -1326,75 +1417,20 @@
__HAL_LOCK(huart);
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
- huart->RxISR = NULL;
+ /* Set Reception type to Standard reception */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- /* Computation of UART mask to apply to RDR register */
- UART_MASK_COMPUTATION(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->RxState = HAL_UART_STATE_BUSY_RX;
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
-
-#if defined(USART_CR1_FIFOEN)
- /* Configure Rx interrupt processing*/
- if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess))
+ if (!(IS_LPUART_INSTANCE(huart->Instance)))
{
- /* Set the Rx ISR function pointer according to the data word length */
- if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ /* Check that USART RTOEN bit is set */
+ if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U)
{
- huart->RxISR = UART_RxISR_16BIT_FIFOEN;
+ /* Enable the UART Receiver Timeout Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE);
}
- else
- {
- huart->RxISR = UART_RxISR_8BIT_FIFOEN;
- }
-
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
- }
- else
- {
- /* Set the Rx ISR function pointer according to the data word length */
- if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
- {
- huart->RxISR = UART_RxISR_16BIT;
- }
- else
- {
- huart->RxISR = UART_RxISR_8BIT;
- }
-
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE);
- }
-#else
- /* Set the Rx ISR function pointer according to the data word length */
- if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
- {
- huart->RxISR = UART_RxISR_16BIT;
- }
- else
- {
- huart->RxISR = UART_RxISR_8BIT;
}
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
-#endif /* USART_CR1_FIFOEN */
-
- return HAL_OK;
+ return(UART_Start_Receive_IT(huart, pData, Size));
}
else
{
@@ -1500,53 +1536,20 @@
__HAL_LOCK(huart);
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
+ /* Set Reception type to Standard reception */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->RxState = HAL_UART_STATE_BUSY_RX;
-
- if (huart->hdmarx != NULL)
+ if (!(IS_LPUART_INSTANCE(huart->Instance)))
{
- /* Set the UART DMA transfer complete callback */
- huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmarx->XferErrorCallback = UART_DMAError;
-
- /* Set the DMA abort callback */
- huart->hdmarx->XferAbortCallback = NULL;
-
- /* Enable the DMA channel */
- if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK)
+ /* Check that USART RTOEN bit is set */
+ if(READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U)
{
- /* Set error code to DMA */
- huart->ErrorCode = HAL_UART_ERROR_DMA;
-
- __HAL_UNLOCK(huart);
-
- /* Restore huart->gState to ready */
- huart->gState = HAL_UART_STATE_READY;
-
- return HAL_ERROR;
+ /* Enable the UART Receiver Timeout Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE);
}
}
- __HAL_UNLOCK(huart);
- /* Enable the UART Parity Error Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
-
- return HAL_OK;
+ return(UART_Start_Receive_DMA(huart, pData, Size));
}
else
{
@@ -1607,7 +1610,7 @@
/* Clear the Overrun flag before resuming the Rx transfer */
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
- /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */
SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
@@ -1704,7 +1707,8 @@
{
#if defined(USART_CR1_FIFOEN)
/* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE |
+ USART_CR1_TCIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE);
#else
/* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
@@ -1712,6 +1716,12 @@
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
#endif /* USART_CR1_FIFOEN */
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Tx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
@@ -1783,6 +1793,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
huart->ErrorCode = HAL_UART_ERROR_NONE;
@@ -1878,6 +1889,12 @@
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
#endif /* USART_CR1_FIFOEN */
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
@@ -1914,6 +1931,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
return HAL_OK;
}
@@ -1938,13 +1956,20 @@
/* Disable interrupts */
#if defined(USART_CR1_FIFOEN)
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | USART_CR1_TXEIE_TXFNFIE));
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE |
+ USART_CR1_TXEIE_TXFNFIE));
CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
#else
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
#endif /* USART_CR1_FIFOEN */
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised
before any call to DMA Abort functions */
/* DMA Tx Handle is valid */
@@ -2055,6 +2080,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2190,6 +2216,12 @@
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
#endif /* USART_CR1_FIFOEN */
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
@@ -2225,6 +2257,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2249,6 +2282,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2453,6 +2487,101 @@
} /* End if some error occurs */
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ &&((isrflags & USART_ISR_IDLE) != 0U)
+ &&((cr1its & USART_ISR_IDLE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+
+ /* Check if DMA mode is enabled in UART */
+ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
+ {
+ /* DMA mode enabled */
+ /* Check received length : If all expected data are received, do nothing,
+ (DMA cplt callback will be called).
+ Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
+ uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx);
+ if ( (nb_remaining_rx_data > 0U)
+ &&(nb_remaining_rx_data < huart->RxXferSize))
+ {
+ /* Reception is not complete */
+ huart->RxXferCount = nb_remaining_rx_data;
+
+ /* In Normal mode, end DMA xfer and HAL UART Rx process*/
+ if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC))
+ {
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ /* Last bytes received, so no need as the abort is immediate */
+ (void)HAL_DMA_Abort(huart->hdmarx);
+ }
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount));
+#else
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount));
+#endif
+ }
+ return;
+ }
+ else
+ {
+ /* DMA mode not enabled */
+ /* Check received length : If all expected data are received, do nothing.
+ Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
+ uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount;
+ if ( (huart->RxXferCount > 0U)
+ &&(nb_rx_data > 0U) )
+ {
+#if defined(USART_CR1_FIFOEN)
+ /* Disable the UART Parity Error Interrupt and RXNE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+#else
+ /* Disable the UART Parity Error Interrupt and RXNE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+#endif
+
+ /* Rx process is completed, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+
+ /* Clear RxISR function pointer */
+ huart->RxISR = NULL;
+
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxEventCallback(huart, nb_rx_data);
+#else
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, nb_rx_data);
+#endif
+ }
+ return;
+ }
+ }
+
/* UART wakeup from Stop mode interrupt occurred ---------------------------*/
if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U))
{
@@ -2645,6 +2774,24 @@
}
/**
+ * @brief Reception Event Callback (Rx event notification called after use of advanced reception service).
+ * @param huart UART handle
+ * @param Size Number of data available in application reception buffer (indicates a position in
+ * reception buffer until which, data are available)
+ * @retval None
+ */
+__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ UNUSED(Size);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UARTEx_RxEventCallback can be implemented in the user file.
+ */
+}
+
+/**
* @}
*/
@@ -2968,6 +3115,7 @@
huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
#endif /* USART_CR1_FIFOEN */
+ huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */
}
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
@@ -3018,9 +3166,6 @@
* set TE and RE bits according to huart->Init.Mode value
* set OVER8 bit according to huart->Init.OverSampling value */
tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ;
-#if defined(USART_CR1_FIFOEN)
- tmpreg |= (uint32_t)huart->FifoMode;
-#endif /* USART_CR1_FIFOEN */
MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg);
/*-------------------------- USART CR2 Configuration -----------------------*/
@@ -3093,7 +3238,7 @@
{
/* Check computed UsartDiv value is in allocated range
(it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */
- usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, (uint64_t)huart->Init.BaudRate, huart->Init.ClockPrescaler));
+ usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler));
if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX))
{
huart->Instance->BRR = usartdiv;
@@ -3102,7 +3247,8 @@
{
ret = HAL_ERROR;
}
- } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */
+ } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) ||
+ (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */
#else
/* No Prescaler applicable */
/* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */
@@ -3113,7 +3259,7 @@
}
else
{
- usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, (uint64_t)huart->Init.BaudRate));
+ usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate));
if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX))
{
huart->Instance->BRR = usartdiv;
@@ -3315,7 +3461,7 @@
/* Initialize the UART ErrorCode */
huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
/* Check if the Transmitter is enabled */
@@ -3343,6 +3489,7 @@
/* Initialize the UART State */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
__HAL_UNLOCK(huart);
@@ -3369,7 +3516,8 @@
{
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
{
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
+ interrupts for the interrupt process */
#if defined(USART_CR1_FIFOEN)
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
#else
@@ -3392,7 +3540,8 @@
/* Clear Receiver Timeout flag*/
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF);
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
+ interrupts for the interrupt process */
#if defined(USART_CR1_FIFOEN)
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
#else
@@ -3415,6 +3564,151 @@
return HAL_OK;
}
+/**
+ * @brief Start Receive operation in interrupt mode.
+ * @note This function could be called by all HAL UART API providing reception in Interrupt mode.
+ * @note When calling this function, parameters validity is considered as already checked,
+ * i.e. Rx State, buffer address, ...
+ * UART Handle is assumed as Locked.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (u8 or u16 data elements).
+ * @param Size Amount of data elements (u8 or u16) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+ huart->RxISR = NULL;
+
+ /* Computation of UART mask to apply to RDR register */
+ UART_MASK_COMPUTATION(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+#if defined(USART_CR1_FIFOEN)
+ /* Configure Rx interrupt processing */
+ if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess))
+ {
+ /* Set the Rx ISR function pointer according to the data word length */
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ huart->RxISR = UART_RxISR_16BIT_FIFOEN;
+ }
+ else
+ {
+ huart->RxISR = UART_RxISR_8BIT_FIFOEN;
+ }
+
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
+ }
+ else
+ {
+ /* Set the Rx ISR function pointer according to the data word length */
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ huart->RxISR = UART_RxISR_16BIT;
+ }
+ else
+ {
+ huart->RxISR = UART_RxISR_8BIT;
+ }
+
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE);
+ }
+#else
+ /* Set the Rx ISR function pointer according to the data word length */
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ huart->RxISR = UART_RxISR_16BIT;
+ }
+ else
+ {
+ huart->RxISR = UART_RxISR_8BIT;
+ }
+
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE);
+#endif /* USART_CR1_FIFOEN */
+ return HAL_OK;
+}
+
+/**
+ * @brief Start Receive operation in DMA mode.
+ * @note This function could be called by all HAL UART API providing reception in DMA mode.
+ * @note When calling this function, parameters validity is considered as already checked,
+ * i.e. Rx State, buffer address, ...
+ * UART Handle is assumed as Locked.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (u8 or u16 data elements).
+ * @param Size Amount of data elements (u8 or u16) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ if (huart->hdmarx != NULL)
+ {
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK)
+ {
+ /* Set error code to DMA */
+ huart->ErrorCode = HAL_UART_ERROR_DMA;
+
+ __HAL_UNLOCK(huart);
+
+ /* Restore huart->gState to ready */
+ huart->gState = HAL_UART_STATE_READY;
+
+ return HAL_ERROR;
+ }
+ }
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+}
+
/**
* @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion).
@@ -3453,8 +3747,15 @@
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
#endif /* USART_CR1_FIFOEN */
+ /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Reset RxIsr function pointer */
huart->RxISR = NULL;
@@ -3537,15 +3838,37 @@
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+
+ /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
}
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : use Rx Event callback */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* In other cases : use Rx Complete callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
}
/**
@@ -3557,13 +3880,29 @@
{
UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent);
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : use Rx Event callback */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx Half complete callback*/
- huart->RxHalfCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize/2U);
#else
- /*Call legacy weak Rx Half complete callback*/
- HAL_UART_RxHalfCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* In other cases : use Rx Half Complete callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx Half complete callback*/
+ huart->RxHalfCpltCallback(huart);
+#else
+ /*Call legacy weak Rx Half complete callback*/
+ HAL_UART_RxHalfCpltCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
}
/**
@@ -3670,6 +4009,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -3721,6 +4061,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -3790,6 +4131,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -3802,7 +4144,7 @@
}
/**
- * @brief TX interrrupt handler for 7 or 8 bits data word length .
+ * @brief TX interrupt handler for 7 or 8 bits data word length .
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Transmit_IT().
* @param huart UART handle.
@@ -3835,7 +4177,7 @@
}
/**
- * @brief TX interrrupt handler for 9 bits data word length.
+ * @brief TX interrupt handler for 9 bits data word length.
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Transmit_IT().
* @param huart UART handle.
@@ -3872,7 +4214,7 @@
#if defined(USART_CR1_FIFOEN)
/**
- * @brief TX interrrupt handler for 7 or 8 bits data word length and FIFO mode is enabled.
+ * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled.
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Transmit_IT().
* @param huart UART handle.
@@ -3912,7 +4254,7 @@
}
/**
- * @brief TX interrrupt handler for 9 bits data word length and FIFO mode is enabled.
+ * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled.
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Transmit_IT().
* @param huart UART handle.
@@ -3981,7 +4323,7 @@
}
/**
- * @brief RX interrrupt handler for 7 or 8 bits data word length .
+ * @brief RX interrupt handler for 7 or 8 bits data word length .
* @param huart UART handle.
* @retval None
*/
@@ -4016,13 +4358,33 @@
/* Clear RxISR function pointer */
huart->RxISR = NULL;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ /* Disable IDLE interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
+#endif
+ }
+ else
+ {
+ /* Standard reception API called */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
else
@@ -4033,7 +4395,7 @@
}
/**
- * @brief RX interrrupt handler for 9 bits data word length .
+ * @brief RX interrupt handler for 9 bits data word length .
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Receive_IT()
* @param huart UART handle.
@@ -4072,13 +4434,33 @@
/* Clear RxISR function pointer */
huart->RxISR = NULL;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ /* Disable IDLE interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
+#endif
+ }
+ else
+ {
+ /* Standard reception API called */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
else
@@ -4090,7 +4472,7 @@
#if defined(USART_CR1_FIFOEN)
/**
- * @brief RX interrrupt handler for 7 or 8 bits data word length and FIFO mode is enabled.
+ * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled.
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Receive_IT()
* @param huart UART handle.
@@ -4100,25 +4482,74 @@
{
uint16_t uhMask = huart->Mask;
uint16_t uhdata;
- uint16_t nb_rx_data;
+ uint16_t nb_rx_data;
uint16_t rxdatacount;
+ uint32_t isrflags = READ_REG(huart->Instance->ISR);
+ uint32_t cr1its = READ_REG(huart->Instance->CR1);
+ uint32_t cr3its = READ_REG(huart->Instance->CR3);
/* Check that a Rx process is ongoing */
if (huart->RxState == HAL_UART_STATE_BUSY_RX)
{
- for (nb_rx_data = huart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--)
+ nb_rx_data = huart->NbRxDataToProcess;
+ while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U))
{
uhdata = (uint16_t) READ_REG(huart->Instance->RDR);
*huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask);
huart->pRxBuffPtr++;
huart->RxXferCount--;
+ isrflags = READ_REG(huart->Instance->ISR);
+
+ /* If some non blocking errors occurred */
+ if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U)
+ {
+ /* UART parity error interrupt occurred -------------------------------------*/
+ if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ }
+
+ /* UART frame error interrupt occurred --------------------------------------*/
+ if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ }
+
+ /* UART noise error interrupt occurred --------------------------------------*/
+ if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ }
+
+ /* Call UART Error Call back function if need be ----------------------------*/
+ if (huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered error callback*/
+ huart->ErrorCallback(huart);
+#else
+ /*Call legacy weak error callback*/
+ HAL_UART_ErrorCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ }
+ }
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXFT interrupt*/
CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error)
+ and RX FIFO Threshold interrupt */
CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Rx process is completed, restore huart->RxState to Ready */
@@ -4127,13 +4558,33 @@
/* Clear RxISR function pointer */
huart->RxISR = NULL;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ /* Disable IDLE interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
+#endif
+ }
+ else
+ {
+ /* Standard reception API called */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
@@ -4162,7 +4613,7 @@
}
/**
- * @brief RX interrrupt handler for 9 bits data word length and FIFO mode is enabled.
+ * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled.
* @note Function is called under interruption only, once
* interruptions have been enabled by HAL_UART_Receive_IT()
* @param huart UART handle.
@@ -4173,26 +4624,75 @@
uint16_t *tmp;
uint16_t uhMask = huart->Mask;
uint16_t uhdata;
- uint16_t nb_rx_data;
+ uint16_t nb_rx_data;
uint16_t rxdatacount;
+ uint32_t isrflags = READ_REG(huart->Instance->ISR);
+ uint32_t cr1its = READ_REG(huart->Instance->CR1);
+ uint32_t cr3its = READ_REG(huart->Instance->CR3);
/* Check that a Rx process is ongoing */
if (huart->RxState == HAL_UART_STATE_BUSY_RX)
{
- for (nb_rx_data = huart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--)
+ nb_rx_data = huart->NbRxDataToProcess;
+ while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U))
{
uhdata = (uint16_t) READ_REG(huart->Instance->RDR);
tmp = (uint16_t *) huart->pRxBuffPtr ;
*tmp = (uint16_t)(uhdata & uhMask);
huart->pRxBuffPtr += 2U;
huart->RxXferCount--;
+ isrflags = READ_REG(huart->Instance->ISR);
+
+ /* If some non blocking errors occurred */
+ if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U)
+ {
+ /* UART parity error interrupt occurred -------------------------------------*/
+ if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_PE;
+ }
+
+ /* UART frame error interrupt occurred --------------------------------------*/
+ if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_FE;
+ }
+
+ /* UART noise error interrupt occurred --------------------------------------*/
+ if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF);
+
+ huart->ErrorCode |= HAL_UART_ERROR_NE;
+ }
+
+ /* Call UART Error Call back function if need be ----------------------------*/
+ if (huart->ErrorCode != HAL_UART_ERROR_NONE)
+ {
+ /* Non Blocking error : transfer could go on.
+ Error is notified to user through user error callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered error callback*/
+ huart->ErrorCallback(huart);
+#else
+ /*Call legacy weak error callback*/
+ HAL_UART_ErrorCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ }
+ }
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXFT interrupt*/
CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error)
+ and RX FIFO Threshold interrupt */
CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Rx process is completed, restore huart->RxState to Ready */
@@ -4201,13 +4701,33 @@
/* Clear RxISR function pointer */
huart->RxISR = NULL;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ /* Disable IDLE interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
+#endif
+ }
+ else
+ {
+ /* Standard reception API called */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
diff --git a/Src/stm32l4xx_hal_uart_ex.c b/Src/stm32l4xx_hal_uart_ex.c
index 44aa959..b375d29 100644
--- a/Src/stm32l4xx_hal_uart_ex.c
+++ b/Src/stm32l4xx_hal_uart_ex.c
@@ -340,6 +340,41 @@
(+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold
(+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold
+ [..] This subsection also provides a set of additional functions providing enhanced reception
+ services to user. (For example, these functions allow application to handle use cases
+ where number of data to be received is unknown).
+
+ (#) Compared to standard reception services which only consider number of received
+ data elements as reception completion criteria, these functions also consider additional events
+ as triggers for updating reception status to caller :
+ (+) Detection of inactivity period (RX line has not been active for a given period).
+ (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state)
+ for 1 frame time, after last received byte.
+ (++) RX inactivity detected by RTO, i.e. line has been in idle state
+ for a programmable time, after last received byte.
+ (+) Detection that a specific character has been received.
+
+ (#) There are two mode of transfer:
+ (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received,
+ or till IDLE event occurs. Reception is handled only during function execution.
+ When function exits, no data reception could occur. HAL status and number of actually received data elements,
+ are returned by function after finishing transfer.
+ (+) Non-Blocking mode: The reception is performed using Interrupts or DMA.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode.
+ The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process
+ The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected.
+
+ (#) Blocking mode API:
+ (+) HAL_UARTEx_ReceiveToIdle()
+
+ (#) Non-Blocking mode API with Interrupt:
+ (+) HAL_UARTEx_ReceiveToIdle_IT()
+
+ (#) Non-Blocking mode API with DMA:
+ (+) HAL_UARTEx_ReceiveToIdle_DMA()
+
@endverbatim
* @{
*/
@@ -468,7 +503,7 @@
/* Enable the Peripheral */
__HAL_UART_ENABLE(huart);
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
/* Wait until REACK flag is set */
@@ -707,6 +742,254 @@
#endif /* USART_CR1_FIFOEN */
/**
+ * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs.
+ * @note HAL_OK is returned if reception is completed (expected number of data has been received)
+ * or if reception is stopped after IDLE event (less than the expected number of data has been received)
+ * In this case, RxLen output parameter indicates number of data available in reception buffer.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO
+ * is not empty. Read operations from the RDR register are performed when
+ * RXFNE flag is set. From hardware perspective, RXFNE flag and
+ * RXNE are mapped on the same bit-field.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event)
+ * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout)
+{
+ uint8_t *pdata8bits;
+ uint16_t *pdata16bits;
+ uint16_t uhMask;
+ uint32_t tickstart;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ /* Init tickstart for timeout management */
+ tickstart = HAL_GetTick();
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* Computation of UART mask to apply to RDR register */
+ UART_MASK_COMPUTATION(huart);
+ uhMask = huart->Mask;
+
+ /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ pdata8bits = NULL;
+ pdata16bits = (uint16_t *) pData;
+ }
+ else
+ {
+ pdata8bits = pData;
+ pdata16bits = NULL;
+ }
+
+ __HAL_UNLOCK(huart);
+
+ /* Initialize output number of received elements */
+ *RxLen = 0U;
+
+ /* as long as data have to be received */
+ while (huart->RxXferCount > 0U)
+ {
+ /* Check if IDLE flag is set */
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE))
+ {
+ /* Clear IDLE flag in ISR */
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+
+ /* If Set, but no data ever received, clear flag without exiting loop */
+ /* If Set, and data has already been received, this means Idle Event is valid : End reception */
+ if (*RxLen > 0U)
+ {
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_OK;
+ }
+ }
+
+ /* Check if RXNE flag is set */
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE))
+ {
+ if (pdata8bits == NULL)
+ {
+ *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask);
+ pdata16bits++;
+ }
+ else
+ {
+ *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask);
+ pdata8bits++;
+ }
+ /* Increment number of received elements */
+ *RxLen += 1U;
+ huart->RxXferCount--;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set number of received elements in output parameter : RxLen */
+ *RxLen = huart->RxXferSize - huart->RxXferCount;
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating
+ * number of received data elements.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef status;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ /* Set Reception type to reception till IDLE Event*/
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ status = UART_Start_Receive_IT(huart, pData, Size);
+
+ /* Check Rx process has been successfully started */
+ if (status == HAL_OK)
+ {
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+ else
+ {
+ /* In case of errors already pending when reception is started,
+ Interrupts may have already been raised and lead to reception abortion.
+ (Overrun error for instance).
+ In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to DMA services, transferring automatically received data elements in user reception buffer and
+ * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider
+ * reception phase as ended. In all cases, callback execution will indicate number of received data elements.
+ * @note When the UART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position).
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef status;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ /* Set Reception type to reception till IDLE Event*/
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ status = UART_Start_Receive_DMA(huart, pData, Size);
+
+ /* Check Rx process has been successfully started */
+ if (status == HAL_OK)
+ {
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+ else
+ {
+ /* In case of errors already pending when reception is started,
+ Interrupts may have already been raised and lead to reception abortion.
+ (Overrun error for instance).
+ In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
* @}
*/
@@ -749,8 +1032,8 @@
uint8_t tx_fifo_depth;
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (huart->FifoMode == UART_FIFOMODE_DISABLE)
{
@@ -763,8 +1046,10 @@
tx_fifo_depth = TX_FIFO_DEPTH;
rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos);
tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos);
- huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold];
- huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold];
+ huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) /
+ (uint16_t)denominator[tx_fifo_threshold];
+ huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) /
+ (uint16_t)denominator[rx_fifo_threshold];
}
}
#endif /* USART_CR1_FIFOEN */
diff --git a/Src/stm32l4xx_hal_usart_ex.c b/Src/stm32l4xx_hal_usart_ex.c
index c79ebf3..ed49a77 100644
--- a/Src/stm32l4xx_hal_usart_ex.c
+++ b/Src/stm32l4xx_hal_usart_ex.c
@@ -514,8 +514,8 @@
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
/* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (husart->FifoMode == USART_FIFOMODE_DISABLE)
{
diff --git a/Src/stm32l4xx_hal_wwdg.c b/Src/stm32l4xx_hal_wwdg.c
index 9cba36b..1d61948 100644
--- a/Src/stm32l4xx_hal_wwdg.c
+++ b/Src/stm32l4xx_hal_wwdg.c
@@ -21,6 +21,13 @@
before the counter has reached the refresh window value. This
implies that the counter must be refreshed in a limited window.
(+) Once enabled the WWDG cannot be disabled except by a system reset.
+ (+) If required by application, an Early Wakeup Interrupt can be triggered
+ in order to be warned before WWDG expiration. The Early Wakeup Interrupt
+ (EWI) can be used if specific safety operations or data logging must
+ be performed before the actual reset is generated. When the downcounter
+ reaches 0x40, interrupt occurs. This mechanism requires WWDG interrupt
+ line to be enabled in NVIC. Once enabled, EWI interrupt cannot be
+ disabled except by a system reset.
(+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG
reset occurs.
(+) The WWDG counter input clock is derived from the APB clock divided
@@ -32,12 +39,12 @@
(++) min time (mS) = 1000 * (Counter - Window) / WWDG clock
(++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock
(+) Typical values:
- (++) Counter min (T[5;0] = 0x00) @80MHz (PCLK1) with zero prescaler:
- max timeout before reset: approximately 51.2µs
- (++) Counter max (T[5;0] = 0x3F) @80MHz (PCLK1) with prescaler dividing by 8:
+ (++) Counter min (T[5;0] = 0x00) at 80MHz (PCLK1) with zero prescaler:
+ max timeout before reset: approximately 51.2us
+ (++) Counter max (T[5;0] = 0x3F) at 80MHz (PCLK1) with prescaler
+ dividing by 8:
max timeout before reset: approximately 26.21ms
- ==============================================================================
##### How to use this driver #####
==============================================================================
@@ -46,16 +53,16 @@
[..]
(+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
- (+) Set the WWDG prescaler, refresh window and counter value
- using HAL_WWDG_Init() function.
- (+) Start the WWDG using HAL_WWDG_Start() function.
- When the WWDG is enabled the counter value should be configured to
- a value greater than 0x40 to prevent generating an immediate reset.
- (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
- generated when the counter reaches 0x40, and then start the WWDG using
- HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
- add his own code by customization of callback HAL_WWDG_WakeupCallback.
- Once enabled, EWI interrupt cannot be disabled except by a system reset.
+ (+) Configure the WWDG prescaler, refresh window value, counter value and early
+ interrupt status using HAL_WWDG_Init() function. This will automatically
+ enable WWDG and start its downcounter. Time reference can be taken from
+ function exit. Care must be taken to provide a counter value
+ greater than 0x40 to prevent generation of immediate reset.
+ (+) If the Early Wakeup Interrupt (EWI) feature is enabled, an interrupt is
+ generated when the counter reaches 0x40. When HAL_WWDG_IRQHandler is
+ triggered by the interrupt service routine, flag will be automatically
+ cleared and HAL_WWDG_WakeupCallback user callback will be executed. User
+ can add his own code by customization of callback HAL_WWDG_WakeupCallback.
(+) Then the application program must refresh the WWDG counter at regular
intervals during normal operation to prevent an MCU reset, using
HAL_WWDG_Refresh() function. This operation must occur only when
@@ -65,28 +72,28 @@
=============================
[..]
- The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows
+ The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows
the user to configure dynamically the driver callbacks. Use Functions
- @ref HAL_WWDG_RegisterCallback() to register a user callback.
+ HAL_WWDG_RegisterCallback() to register a user callback.
- (+) Function @ref HAL_WWDG_RegisterCallback() allows to register following
+ (+) Function HAL_WWDG_RegisterCallback() allows to register following
callbacks:
(++) EwiCallback : callback for Early WakeUp Interrupt.
(++) MspInitCallback : WWDG MspInit.
This function takes as parameters the HAL peripheral handle, the Callback ID
and a pointer to the user callback function.
- (+) Use function @ref HAL_WWDG_UnRegisterCallback() to reset a callback to
- the default weak (surcharged) function. @ref HAL_WWDG_UnRegisterCallback()
+ (+) Use function HAL_WWDG_UnRegisterCallback() to reset a callback to
+ the default weak (surcharged) function. HAL_WWDG_UnRegisterCallback()
takes as parameters the HAL peripheral handle and the Callback ID.
This function allows to reset following callbacks:
(++) EwiCallback : callback for Early WakeUp Interrupt.
(++) MspInitCallback : WWDG MspInit.
[..]
- When calling @ref HAL_WWDG_Init function, callbacks are reset to the
+ When calling HAL_WWDG_Init function, callbacks are reset to the
corresponding legacy weak (surcharged) functions:
- @ref HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have
+ HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have
not been registered before.
[..]
@@ -97,7 +104,7 @@
*** WWDG HAL driver macros list ***
===================================
[..]
- Below the list of most used macros in WWDG HAL driver.
+ Below the list of available macros in WWDG HAL driver.
(+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
(+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
(+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
@@ -198,7 +205,7 @@
#else
/* Init the low level hardware */
HAL_WWDG_MspInit(hwwdg);
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
/* Set WWDG Counter */
WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter));
@@ -243,7 +250,8 @@
* @param pCallback pointer to the Callback function
* @retval status
*/
-HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID,
+ pWWDG_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -304,7 +312,7 @@
return status;
}
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
/**
* @}
@@ -372,7 +380,7 @@
#else
/* Early Wakeup callback */
HAL_WWDG_EarlyWakeupCallback(hwwdg);
-#endif
+#endif /* USE_HAL_WWDG_REGISTER_CALLBACKS */
}
}
}
diff --git a/Src/stm32l4xx_ll_adc.c b/Src/stm32l4xx_ll_adc.c
index 5c1bcf0..f82eeb3 100644
--- a/Src/stm32l4xx_ll_adc.c
+++ b/Src/stm32l4xx_ll_adc.c
@@ -946,6 +946,12 @@
* Refer to function @ref LL_ADC_INJ_SetSequencerRanks().
* - Set ADC channel sampling time
* Refer to function LL_ADC_SetChannelSamplingTime();
+ * @note Caution if feature ADC group injected contexts queue is enabled
+ * (refer to with function @ref LL_ADC_INJ_SetQueueMode() ):
+ * using successively several times this function will appear as
+ * having no effect.
+ * To set several features of ADC group injected, use
+ * function @ref LL_ADC_INJ_ConfigQueueContext().
* @param ADCx ADC instance
* @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure
* @retval An ErrorStatus enumeration value:
diff --git a/Src/stm32l4xx_ll_fmc.c b/Src/stm32l4xx_ll_fmc.c
index d4dae27..a246372 100644
--- a/Src/stm32l4xx_ll_fmc.c
+++ b/Src/stm32l4xx_ll_fmc.c
@@ -58,7 +58,7 @@
/** @addtogroup STM32L4xx_HAL_Driver
* @{
*/
-#if ((defined HAL_NOR_MODULE_ENABLED || defined HAL_SRAM_MODULE_ENABLED) || defined HAL_NAND_MODULE_ENABLED )
+#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED)
/** @defgroup FMC_LL FMC Low Layer
* @brief FMC driver modules
@@ -74,7 +74,7 @@
/* ----------------------- FMC registers bit mask --------------------------- */
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/* --- BCR Register ---*/
/* BCR register clear mask */
@@ -95,24 +95,13 @@
/* --- BWTR Register ---*/
/* BWTR register clear mask */
#if defined(FMC_BWTRx_DATAHLD)
-#if defined(FMC_BWTRx_BUSTURN)
#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\
FMC_BWTRx_DATAST | FMC_BWTRx_BUSTURN |\
FMC_BWTRx_ACCMOD | FMC_BWTRx_DATAHLD))
#else
#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\
- FMC_BWTRx_DATAST | FMC_BWTRx_ACCMOD |\
- FMC_BWTRx_DATAHLD))
-#endif /* FMC_BWTRx_BUSTURN */
-#else
-#if defined(FMC_BWTRx_BUSTURN)
-#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\
FMC_BWTRx_DATAST | FMC_BWTRx_BUSTURN |\
FMC_BWTRx_ACCMOD))
-#else
-#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\
- FMC_BWTRx_DATAST | FMC_BWTRx_ACCMOD))
-#endif /* FMC_BWTRx_BUSTURN */
#endif /* FMC_BWTRx_DATAHLD */
#endif /* FMC_BANK1 */
#if defined(FMC_BANK3)
@@ -148,7 +137,7 @@
* @{
*/
-#if defined FMC_BANK1
+#if defined(FMC_BANK1)
/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions
* @brief NORSRAM Controller functions
@@ -199,7 +188,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_InitTypeDef *Init)
+ FMC_NORSRAM_InitTypeDef *Init)
{
uint32_t flashaccess;
uint32_t btcr_reg;
@@ -330,11 +319,8 @@
SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB3EN);
break;
- case FMC_NORSRAM_BANK4 :
- SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN);
- break;
-
default :
+ SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN);
break;
}
}
@@ -351,7 +337,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+ FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
@@ -392,11 +378,8 @@
CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB3EN);
break;
- case FMC_NORSRAM_BANK4 :
- CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN);
- break;
-
default :
+ CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN);
break;
}
#endif /* FMC_PCSCNTR_CSCOUNT */
@@ -413,7 +396,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device,
- FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+ FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
{
uint32_t tmpr;
@@ -432,21 +415,29 @@
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Set FMC_NORSRAM device timing parameters */
+#if defined(FMC_BTRx_DATAHLD)
MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime |
((Timing->AddressHoldTime) << FMC_BTRx_ADDHLD_Pos) |
((Timing->DataSetupTime) << FMC_BTRx_DATAST_Pos) |
-#if defined(FMC_BTRx_DATAHLD)
((Timing->DataHoldTime) << FMC_BTRx_DATAHLD_Pos) |
-#endif /* FMC_BTRx_DATAHLD */
((Timing->BusTurnAroundDuration) << FMC_BTRx_BUSTURN_Pos) |
(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos) |
(((Timing->DataLatency) - 2U) << FMC_BTRx_DATLAT_Pos) |
(Timing->AccessMode)));
+#else /* FMC_BTRx_DATAHLD */
+ MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime |
+ ((Timing->AddressHoldTime) << FMC_BTRx_ADDHLD_Pos) |
+ ((Timing->DataSetupTime) << FMC_BTRx_DATAST_Pos) |
+ ((Timing->BusTurnAroundDuration) << FMC_BTRx_BUSTURN_Pos) |
+ (((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos) |
+ (((Timing->DataLatency) - 2U) << FMC_BTRx_DATLAT_Pos) |
+ (Timing->AccessMode)));
+#endif /* FMC_BTRx_DATAHLD */
/* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
{
- tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~(((uint32_t)0x0F) << FMC_BTRx_CLKDIV_Pos));
+ tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTRx_CLKDIV_Pos));
tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos);
MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTRx_CLKDIV, tmpr);
}
@@ -467,7 +458,8 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device,
- FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+ FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
+ uint32_t ExtendedMode)
{
/* Check the parameters */
assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
@@ -483,25 +475,25 @@
#if defined(FMC_BTRx_DATAHLD)
assert_param(IS_FMC_DATAHOLD_DURATION(Timing->DataHoldTime));
#endif /* FMC_BTRx_DATAHLD */
-#if defined(FMC_BWTRx_BUSTURN)
assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
-#endif /* FMC_BWTRx_BUSTURN */
assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Set NORSRAM device timing register for write configuration, if extended mode is used */
+#if defined(FMC_BTRx_DATAHLD)
MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) |
((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) |
-#if defined(FMC_BTRx_DATAHLD)
((Timing->DataHoldTime) << FMC_BWTRx_DATAHLD_Pos) |
-#endif /* FMC_BTRx_DATAHLD */
-#if defined(FMC_BWTRx_BUSTURN)
Timing->AccessMode |
((Timing->BusTurnAroundDuration) << FMC_BWTRx_BUSTURN_Pos)));
-#else
- Timing->AccessMode));
-#endif /* FMC_BWTRx_BUSTURN */
+#else /* FMC_BTRx_DATAHLD */
+ MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
+ ((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) |
+ ((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) |
+ Timing->AccessMode |
+ ((Timing->BusTurnAroundDuration) << FMC_BWTRx_BUSTURN_Pos)));
+#endif /* FMC_BTRx_DATAHLD */
}
else
{
@@ -658,7 +650,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device,
- FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+ FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
@@ -689,7 +681,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device,
- FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+ FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
@@ -811,7 +803,7 @@
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank,
- uint32_t Timeout)
+ uint32_t Timeout)
{
uint32_t tickstart;
diff --git a/Src/stm32l4xx_ll_gpio.c b/Src/stm32l4xx_ll_gpio.c
index b1aef8d..2fdf8be 100644
--- a/Src/stm32l4xx_ll_gpio.c
+++ b/Src/stm32l4xx_ll_gpio.c
@@ -211,9 +211,6 @@
if (currentpin != 0x00u)
{
- /* Pin Mode configuration */
- LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
-
if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
{
/* Check Speed mode parameters */
@@ -221,6 +218,12 @@
/* Speed mode configuration */
LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
+
+ /* Check Output mode parameters */
+ assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
+
+ /* Output mode configuration*/
+ LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
}
/* Pull-up Pull down resistor configuration*/
@@ -241,19 +244,13 @@
LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
}
+
+ /* Pin Mode configuration */
+ LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
}
pinpos++;
}
- if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
- {
- /* Check Output mode parameters */
- assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
-
- /* Output mode configuration*/
- LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
-
- }
return (SUCCESS);
}
diff --git a/Src/stm32l4xx_ll_lptim.c b/Src/stm32l4xx_ll_lptim.c
index e8de3a3..cf00698 100644
--- a/Src/stm32l4xx_ll_lptim.c
+++ b/Src/stm32l4xx_ll_lptim.c
@@ -48,22 +48,22 @@
* @{
*/
#define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \
- || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL))
+ || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL))
#define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128))
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128))
#define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \
- || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE))
+ || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE))
#define IS_LL_LPTIM_OUTPUT_POLARITY(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_REGULAR) \
- || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE))
+ || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE))
/**
* @}
*/
@@ -269,8 +269,7 @@
do
{
rcc_clock.SYSCLK_Frequency--; /* Used for timeout */
- }
- while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
+ } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
LL_LPTIM_ClearFlag_CMPOK(LPTIMx);
}
@@ -302,8 +301,7 @@
do
{
rcc_clock.SYSCLK_Frequency--; /* Used for timeout */
- }
- while (((LL_LPTIM_IsActiveFlag_REPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
+ } while (((LL_LPTIM_IsActiveFlag_REPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
LL_LPTIM_ClearFlag_REPOK(LPTIMx);
}
diff --git a/Src/stm32l4xx_ll_lpuart.c b/Src/stm32l4xx_ll_lpuart.c
index c732d4d..b1f6882 100644
--- a/Src/stm32l4xx_ll_lpuart.c
+++ b/Src/stm32l4xx_ll_lpuart.c
@@ -155,8 +155,10 @@
/**
* @brief Initialize LPUART registers according to the specified
* parameters in LPUART_InitStruct.
- * @note As some bits in LPUART configuration registers can only be written when the LPUART is disabled (USART_CR1_UE bit =0),
- * LPUART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @note As some bits in LPUART configuration registers can only be written when
+ * the LPUART is disabled (USART_CR1_UE bit =0),
+ * LPUART Peripheral should be in disabled state prior calling this function.
+ * Otherwise, ERROR result will be returned.
* @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0).
* @param LPUARTx LPUART Instance
* @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure
@@ -204,7 +206,8 @@
/*---------------------------- LPUART CR3 Configuration -----------------------
* Configure LPUARTx CR3 (Hardware Flow Control) with parameters:
- * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to LPUART_InitStruct->HardwareFlowControl value.
+ * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according
+ * to LPUART_InitStruct->HardwareFlowControl value.
*/
LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl);
@@ -214,9 +217,9 @@
periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE);
/* Configure the LPUART Baud Rate :
- #if defined(USART_PRESC_PRESCALER)
+#if defined(USART_PRESC_PRESCALER)
- prescaler value is required
- #endif
+#endif
- valid baud rate value (different from 0) is required
- Peripheral clock as returned by RCC service, should be valid (different from 0).
*/
@@ -283,7 +286,7 @@
* @}
*/
-#endif /* defined (LPUART1) */
+#endif /* LPUART1 */
/**
* @}
diff --git a/Src/stm32l4xx_ll_rcc.c b/Src/stm32l4xx_ll_rcc.c
index e8264a9..a55f4f4 100644
--- a/Src/stm32l4xx_ll_rcc.c
+++ b/Src/stm32l4xx_ll_rcc.c
@@ -137,27 +137,29 @@
/** @defgroup RCC_LL_Private_Functions RCC Private functions
* @{
*/
-uint32_t RCC_GetSystemClockFreq(void);
-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
-uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency);
-uint32_t RCC_PLL_GetFreqDomain_SYS(void);
-uint32_t RCC_PLL_GetFreqDomain_SAI(void);
-uint32_t RCC_PLL_GetFreqDomain_48M(void);
+static uint32_t RCC_GetSystemClockFreq(void);
+static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
+static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
+static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency);
+static uint32_t RCC_PLL_GetFreqDomain_SYS(void);
+#if defined(RCC_CCIPR_SAI1SEL) || defined(RCC_CCIPR_SAI2SEL) || defined(RCC_CCIPR2_SAI1SEL) || defined(RCC_CCIPR2_SAI2SEL)
+static uint32_t RCC_PLL_GetFreqDomain_SAI(void);
+#endif
+static uint32_t RCC_PLL_GetFreqDomain_48M(void);
#if defined(RCC_PLLSAI1_SUPPORT)
-uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void);
-uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void);
-uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void);
+static uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void);
+static uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void);
+static uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void);
#endif /* RCC_PLLSAI1_SUPPORT */
#if defined(RCC_PLLSAI2_SUPPORT)
-uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void);
+static uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void);
#if defined(LTDC)
-uint32_t RCC_PLLSAI2_GetFreqDomain_LTDC(void);
+static uint32_t RCC_PLLSAI2_GetFreqDomain_LTDC(void);
#else
-uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void);
+static uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void);
#endif /* LTDC */
#if defined(DSI)
-uint32_t RCC_PLLSAI2_GetFreqDomain_DSI(void);
+static uint32_t RCC_PLLSAI2_GetFreqDomain_DSI(void);
#endif /* DSI */
#endif /*RCC_PLLSAI2_SUPPORT*/
/**
@@ -1459,7 +1461,7 @@
* @brief Return SYSTEM clock frequency
* @retval SYSTEM clock frequency (in Hz)
*/
-uint32_t RCC_GetSystemClockFreq(void)
+static uint32_t RCC_GetSystemClockFreq(void)
{
uint32_t frequency;
@@ -1501,7 +1503,7 @@
* @param SYSCLK_Frequency SYSCLK clock frequency
* @retval HCLK clock frequency (in Hz)
*/
-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
+static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
{
/* HCLK clock frequency */
return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
@@ -1512,7 +1514,7 @@
* @param HCLK_Frequency HCLK clock frequency
* @retval PCLK1 clock frequency (in Hz)
*/
-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
+static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
{
/* PCLK1 clock frequency */
return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
@@ -1523,7 +1525,7 @@
* @param HCLK_Frequency HCLK clock frequency
* @retval PCLK2 clock frequency (in Hz)
*/
-uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency)
+static uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency)
{
/* PCLK2 clock frequency */
return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler());
@@ -1533,7 +1535,7 @@
* @brief Return PLL clock frequency used for system domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_SYS(void)
+static uint32_t RCC_PLL_GetFreqDomain_SYS(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1575,7 +1577,7 @@
* @brief Return PLL clock frequency used for SAI domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_SAI(void)
+static uint32_t RCC_PLL_GetFreqDomain_SAI(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1617,7 +1619,7 @@
* @brief Return PLL clock frequency used for 48 MHz domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_48M(void)
+static uint32_t RCC_PLL_GetFreqDomain_48M(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1658,7 +1660,7 @@
* @brief Return PLL clock frequency used for DSI clock
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI2_GetFreqDomain_DSI(void)
+static uint32_t RCC_PLLSAI2_GetFreqDomain_DSI(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1701,7 +1703,7 @@
* @brief Return PLLSAI1 clock frequency used for SAI domain
* @retval PLLSAI1 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void)
+static uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1745,7 +1747,7 @@
* @brief Return PLLSAI1 clock frequency used for 48Mhz domain
* @retval PLLSAI1 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void)
+static uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1789,7 +1791,7 @@
* @brief Return PLLSAI1 clock frequency used for ADC domain
* @retval PLLSAI1 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void)
+static uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1835,7 +1837,7 @@
* @brief Return PLLSAI2 clock frequency used for SAI domain
* @retval PLLSAI2 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void)
+static uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1885,7 +1887,7 @@
* @brief Return PLLSAI2 clock frequency used for LTDC domain
* @retval PLLSAI2 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI2_GetFreqDomain_LTDC(void)
+static uint32_t RCC_PLLSAI2_GetFreqDomain_LTDC(void)
{
uint32_t pllinputfreq, pllsource;
@@ -1928,7 +1930,7 @@
* @brief Return PLLSAI2 clock frequency used for ADC domain
* @retval PLLSAI2 clock frequency (in Hz)
*/
-uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void)
+static uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void)
{
uint32_t pllinputfreq = 0U, pllsource = 0U;
diff --git a/Src/stm32l4xx_ll_spi.c b/Src/stm32l4xx_ll_spi.c
index 023dc4c..cb9db11 100644
--- a/Src/stm32l4xx_ll_spi.c
+++ b/Src/stm32l4xx_ll_spi.c
@@ -232,6 +232,12 @@
SPI_CR2_DS | SPI_CR2_SSOE,
SPI_InitStruct->DataWidth | (SPI_InitStruct->NSS >> 16U));
+ /* Set Rx FIFO to Quarter (1 Byte) in case of 8 Bits mode. No DataPacking by default */
+ if (SPI_InitStruct->DataWidth < LL_SPI_DATAWIDTH_9BIT)
+ {
+ LL_SPI_SetRxFIFOThreshold(SPIx, LL_SPI_RX_FIFO_TH_QUARTER);
+ }
+
/*---------------------------- SPIx CRCPR Configuration ----------------------
* Configure SPIx CRCPR with parameters:
* - CRCPoly: CRCPOLY[15:0] bits
diff --git a/Src/stm32l4xx_ll_usart.c b/Src/stm32l4xx_ll_usart.c
index 2e787fa..69278d3 100644
--- a/Src/stm32l4xx_ll_usart.c
+++ b/Src/stm32l4xx_ll_usart.c
@@ -72,9 +72,6 @@
/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
-/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
-#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
-
#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
|| ((__VALUE__) == LL_USART_DIRECTION_RX) \
|| ((__VALUE__) == LL_USART_DIRECTION_TX) \
@@ -312,9 +309,6 @@
/* Check BRR is greater than or equal to 16d */
assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
-
- /* Check BRR is lower than or equal to 0xFFFF */
- assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
}
#if defined(USART_PRESC_PRESCALER)
@@ -376,8 +370,28 @@
CRx registers */
if (LL_USART_IsEnabled(USARTx) == 0U)
{
- /*---------------------------- USART CR2 Configuration -----------------------*/
- /* If Clock signal has to be output */
+#if defined(USART_CR2_SLVEN)
+ /* Ensure USART instance is USART capable */
+ assert_param(IS_USART_INSTANCE(USARTx));
+
+ /* Check clock related parameters */
+ assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
+ assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
+ assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
+
+ /*---------------------------- USART CR2 Configuration -----------------------
+ * Configure USARTx CR2 (Clock signal related bits) with parameters:
+ * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value
+ * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
+ * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
+ * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
+ */
+ MODIFY_REG(USARTx->CR2,
+ USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
+ USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity |
+ USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
+#else
+ /* If USART Clock signal is disabled */
if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE)
{
/* Deactivate Clock signal delivery :
@@ -407,6 +421,7 @@
USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity |
USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
}
+#endif /* USART_CR2_SLVEN */
}
/* Else (USART not in Disabled state => return ERROR */
else
diff --git a/Src/stm32l4xx_ll_usb.c b/Src/stm32l4xx_ll_usb.c
index 97e5ff0..59ab984 100644
--- a/Src/stm32l4xx_ll_usb.c
+++ b/Src/stm32l4xx_ll_usb.c
@@ -83,40 +83,22 @@
{
HAL_StatusTypeDef ret;
- if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+
+ /* Select FS Embedded PHY */
+ USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+
+ /* Reset after a PHY select */
+ ret = USB_CoreReset(USBx);
+
+ if (cfg.battery_charging_enable == 0U)
{
- USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
-
- /* Init The ULPI Interface */
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
-
- /* Select vbus source */
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
- if (cfg.use_external_vbus == 1U)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
- }
- /* Reset after a PHY select */
- ret = USB_CoreReset(USBx);
+ /* Activate the USB Transceiver */
+ USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN;
}
- else /* FS interface (embedded Phy) */
+ else
{
- /* Select FS Embedded PHY */
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
-
- /* Reset after a PHY select and set Host mode */
- ret = USB_CoreReset(USBx);
-
- if (cfg.battery_charging_enable == 0U)
- {
- /* Activate the USB Transceiver */
- USBx->GCCFG |= USB_OTG_GCCFG_PWRDWN;
- }
- else
- {
- /* Deactivate the USB Transceiver */
- USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
- }
+ /* Deactivate the USB Transceiver */
+ USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
}
return ret;
@@ -227,13 +209,12 @@
}
/**
- * @brief USB_SetCurrentMode : Set functional mode
+ * @brief USB_SetCurrentMode Set functional mode
* @param USBx Selected device
- * @param mode current core mode
+ * @param mode current core mode
* This parameter can be one of these values:
- * @arg USB_DEVICE_MODE: Peripheral mode
- * @arg USB_HOST_MODE: Host mode
- * @arg USB_DRD_MODE: Dual Role Device mode
+ * @arg USB_DEVICE_MODE Peripheral mode
+ * @arg USB_HOST_MODE Host mode
* @retval HAL status
*/
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_ModeTypeDef mode)
@@ -258,7 +239,7 @@
}
/**
- * @brief USB_DevInit : Initializes the USB_OTG controller registers
+ * @brief USB_DevInit Initializes the USB_OTG controller registers
* for device mode
* @param USBx Selected device
* @param cfg pointer to a USB_OTG_CfgTypeDef structure that contains
@@ -462,7 +443,7 @@
* @param USBx Selected device
* @retval speed device speed
* This parameter can be one of these values:
- * @arg PCD_SPEED_FULL: Full speed mode
+ * @arg USBD_FS_SPEED: Full speed mode
*/
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
{
@@ -830,7 +811,8 @@
* @param len Number of bytes to write
* @retval HAL status
*/
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src,
+ uint8_t ch_ep_num, uint16_t len)
{
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t *pSrc = (uint32_t *)src;
@@ -1406,20 +1388,17 @@
* @arg EP_TYPE_BULK: Bulk type
* @arg EP_TYPE_INTR: Interrupt type
* @param mps Max Packet Size
- * This parameter can be a value from 0 to32K
+ * This parameter can be a value from 0 to 32K
* @retval HAL state
*/
-HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps)
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
+ uint8_t epnum, uint8_t dev_address, uint8_t speed,
+ uint8_t ep_type, uint16_t mps)
{
HAL_StatusTypeDef ret = HAL_OK;
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t HCcharEpDir, HCcharLowSpeed;
+ uint32_t HostCoreSpeed;
/* Clear old interrupt conditions for this host channel. */
USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU;
@@ -1491,7 +1470,10 @@
HCcharEpDir = 0U;
}
- if (speed == HPRT0_PRTSPD_LOW_SPEED)
+ HostCoreSpeed = USB_GetHostSpeed(USBx);
+
+ /* LS device plugged to HUB */
+ if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED))
{
HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV;
}
@@ -1523,7 +1505,7 @@
{
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t ch_num = (uint32_t)hc->ch_num;
- static __IO uint32_t tmpreg = 0U;
+ __IO uint32_t tmpreg;
uint8_t is_oddframe;
uint16_t len_words;
uint16_t num_packets;
@@ -1537,20 +1519,29 @@
if (num_packets > max_hc_pkt_count)
{
num_packets = max_hc_pkt_count;
- hc->xfer_len = (uint32_t)num_packets * hc->max_packet;
+ hc->XferSize = (uint32_t)num_packets * hc->max_packet;
}
}
else
{
num_packets = 1U;
}
+
+ /*
+ * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of
+ * max_packet size.
+ */
if (hc->ep_is_in != 0U)
{
- hc->xfer_len = (uint32_t)num_packets * hc->max_packet;
+ hc->XferSize = (uint32_t)num_packets * hc->max_packet;
+ }
+ else
+ {
+ hc->XferSize = hc->xfer_len;
}
/* Initialize the HCTSIZn register */
- USBx_HC(ch_num)->HCTSIZ = (hc->xfer_len & USB_OTG_HCTSIZ_XFRSIZ) |
+ USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) |
(((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |
(((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID);
@@ -1574,44 +1565,44 @@
tmpreg |= USB_OTG_HCCHAR_CHENA;
USBx_HC(ch_num)->HCCHAR = tmpreg;
- if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U))
+ if ((hc->ep_is_in == 0U) && (hc->xfer_len > 0U))
+ {
+ switch (hc->ep_type)
{
- switch (hc->ep_type)
- {
- /* Non periodic transfer */
- case EP_TYPE_CTRL:
- case EP_TYPE_BULK:
+ /* Non periodic transfer */
+ case EP_TYPE_CTRL:
+ case EP_TYPE_BULK:
- len_words = (uint16_t)((hc->xfer_len + 3U) / 4U);
+ len_words = (uint16_t)((hc->xfer_len + 3U) / 4U);
- /* check if there is enough space in FIFO space */
- if (len_words > (USBx->HNPTXSTS & 0xFFFFU))
- {
- /* need to process data in nptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
- }
- break;
+ /* check if there is enough space in FIFO space */
+ if (len_words > (USBx->HNPTXSTS & 0xFFFFU))
+ {
+ /* need to process data in nptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+ }
+ break;
- /* Periodic transfer */
- case EP_TYPE_INTR:
- case EP_TYPE_ISOC:
- len_words = (uint16_t)((hc->xfer_len + 3U) / 4U);
- /* check if there is enough space in FIFO space */
- if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */
- {
- /* need to process data in ptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
- }
- break;
+ /* Periodic transfer */
+ case EP_TYPE_INTR:
+ case EP_TYPE_ISOC:
+ len_words = (uint16_t)((hc->xfer_len + 3U) / 4U);
+ /* check if there is enough space in FIFO space */
+ if (len_words > (USBx_HOST->HPTXSTS & 0xFFFFU)) /* split the transfer */
+ {
+ /* need to process data in ptxfempty interrupt */
+ USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
+ }
+ break;
- default:
- break;
- }
-
- /* Write packet into the Tx FIFO. */
- (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len);
+ default:
+ break;
}
+ /* Write packet into the Tx FIFO. */
+ (void)USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, (uint16_t)hc->xfer_len);
+ }
+
return HAL_OK;
}
@@ -1640,28 +1631,38 @@
uint32_t hcnum = (uint32_t)hc_num;
uint32_t count = 0U;
uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18;
+ uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31;
+
+ if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) &&
+ (ChannelEna == 0U))
+ {
+ return HAL_OK;
+ }
/* Check for space in the request queue to issue the halt. */
if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK))
{
USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
- if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U)
+ if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U)
{
- USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
+ if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U)
{
- if (++count > 1000U)
+ USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+ do
{
- break;
- }
- } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ if (++count > 1000U)
+ {
+ break;
+ }
+ } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
}
}
else
@@ -1808,8 +1809,8 @@
#if defined (USB)
/**
* @brief Initializes the USB Core
- * @param USBx: USB Instance
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
+ * @param USBx USB Instance
+ * @param cfg pointer to a USB_CfgTypeDef structure that contains
* the configuration information for the specified USBx peripheral.
* @retval HAL status
*/
@@ -1830,7 +1831,7 @@
/**
* @brief USB_EnableGlobalInt
* Enables the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx)
@@ -1855,7 +1856,7 @@
/**
* @brief USB_DisableGlobalInt
* Disable the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx)
@@ -1875,11 +1876,11 @@
}
/**
- * @brief USB_SetCurrentMode : Set functional mode
- * @param USBx : Selected device
- * @param mode : current core mode
+ * @brief USB_SetCurrentMode Set functional mode
+ * @param USBx Selected device
+ * @param mode current core mode
* This parameter can be one of the these values:
- * @arg USB_DEVICE_MODE: Peripheral mode
+ * @arg USB_DEVICE_MODE Peripheral mode
* @retval HAL status
*/
HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx, USB_ModeTypeDef mode)
@@ -1896,10 +1897,10 @@
}
/**
- * @brief USB_DevInit : Initializes the USB controller registers
+ * @brief USB_DevInit Initializes the USB controller registers
* for device mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
+ * @param USBx Selected device
+ * @param cfg pointer to a USB_CfgTypeDef structure that contains
* the configuration information for the specified USBx peripheral.
* @retval HAL status
*/
@@ -1909,13 +1910,13 @@
UNUSED(cfg);
/* Init Device */
- /*CNTR_FRES = 1*/
+ /* CNTR_FRES = 1 */
USBx->CNTR = (uint16_t)USB_CNTR_FRES;
- /*CNTR_FRES = 0*/
+ /* CNTR_FRES = 0 */
USBx->CNTR = 0U;
- /*Clear pending interrupts*/
+ /* Clear pending interrupts */
USBx->ISTR = 0U;
/*Set Btable Address*/
@@ -1925,27 +1926,6 @@
}
/**
- * @brief USB_SetDevSpeed :Initializes the device speed
- * depending on the PHY type and the enumeration speed of the device.
- * @param USBx Selected device
- * @param speed device speed
- * @retval Hal status
- */
-HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx, uint8_t speed)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(speed);
-
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-
- return HAL_OK;
-}
-
-/**
* @brief USB_FlushTxFifo : Flush a Tx FIFO
* @param USBx : Selected device
* @param num : FIFO number
@@ -1985,10 +1965,11 @@
return HAL_OK;
}
+#if defined (HAL_PCD_MODULE_ENABLED)
/**
* @brief Activate and configure an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
+ * @param USBx Selected device
+ * @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
@@ -2049,9 +2030,11 @@
{
/*Set the endpoint Receive buffer address */
PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress);
+
/*Set the endpoint Receive buffer counter*/
PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket);
PCD_CLEAR_RX_DTOG(USBx, ep->num);
+
/* Configure VALID status for the Endpoint*/
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
}
@@ -2061,6 +2044,7 @@
{
/* Set the endpoint as double buffered */
PCD_SET_EP_DBUF(USBx, ep->num);
+
/* Set buffer address for double buffered mode */
PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1);
@@ -2079,7 +2063,6 @@
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
if (ep->type != EP_TYPE_ISOC)
{
/* Configure NAK status for the Endpoint */
@@ -2100,8 +2083,8 @@
/**
* @brief De-activate and de-initialize an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
+ * @param USBx Selected device
+ * @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
@@ -2111,12 +2094,14 @@
if (ep->is_in != 0U)
{
PCD_CLEAR_TX_DTOG(USBx, ep->num);
+
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
else
{
PCD_CLEAR_RX_DTOG(USBx, ep->num);
+
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
}
@@ -2142,6 +2127,7 @@
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
PCD_RX_DTOG(USBx, ep->num);
+
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
@@ -2152,15 +2138,15 @@
}
/**
- * @brief USB_EPStartXfer : setup and starts a transfer over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
+ * @brief USB_EPStartXfer setup and starts a transfer over an EP
+ * @param USBx Selected device
+ * @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep)
{
- uint16_t pmabuffer;
uint32_t len;
+ uint16_t pmabuffer;
uint16_t wEPVal;
/* IN endpoint */
@@ -2184,43 +2170,43 @@
}
else
{
- /*double buffer bulk management */
+ /* double buffer bulk management */
if (ep->type == EP_TYPE_BULK)
{
if (ep->xfer_len_db > ep->maxpacket)
{
- /*enable double buffer */
+ /* enable double buffer */
PCD_SET_EP_DBUF(USBx, ep->num);
- len = ep->maxpacket;
- /*each Time to write in PMA xfer_len_db will */
+
+ /* each Time to write in PMA xfer_len_db will */
ep->xfer_len_db -= len;
- /* Fill the two first buffer in the Buffer0 & Buffer1*/
+ /* Fill the two first buffer in the Buffer0 & Buffer1 */
if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
{
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
- /*Write the user buffer to USB PMA */
+ /* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
ep->xfer_buff += len;
if (ep->xfer_len_db > ep->maxpacket)
{
- len = ep->maxpacket;
ep->xfer_len_db -= len;
}
else
{
len = ep->xfer_len_db;
- ep->xfer_len_db = 0;
+ ep->xfer_len_db = 0U;
}
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
- /*Write the user buffer to USB PMA */
+
+ /* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
else
@@ -2228,60 +2214,116 @@
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
- /*Write the user buffer to USB PMA */
+
+ /* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
ep->xfer_buff += len;
if (ep->xfer_len_db > ep->maxpacket)
{
- len = ep->maxpacket;
ep->xfer_len_db -= len;
}
else
{
len = ep->xfer_len_db;
- ep->xfer_len_db = 0;
+ ep->xfer_len_db = 0U;
}
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
- /*Write the user buffer to USB PMA */
+
+ /* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
}
- /*auto Switch to single buffer mode when transfer <Mps no need to manage in double buffer*/
+ /* auto Switch to single buffer mode when transfer <Mps no need to manage in double buffer */
else
{
len = ep->xfer_len_db;
- /*disable double buffer mode */
+
+ /* disable double buffer mode */
PCD_CLEAR_EP_DBUF(USBx, ep->num);
- /*Set Tx count with nbre of byte to be transmitted */
+
+ /* Set Tx count with nbre of byte to be transmitted */
PCD_SET_EP_TX_CNT(USBx, ep->num, len);
pmabuffer = ep->pmaaddr0;
- /*Write the user buffer to USB PMA */
+
+ /* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
- }/*end if bulk double buffer */
+ }/* end if bulk double buffer */
- /*mange isochronous double buffer IN mode */
+ /* manage isochronous double buffer IN mode */
else
{
- /* Write the data to the USB endpoint */
+ /* enable double buffer */
+ PCD_SET_EP_DBUF(USBx, ep->num);
+
+ /* each Time to write in PMA xfer_len_db will */
+ ep->xfer_len_db -= len;
+
+ /* Fill the data buffer */
if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
{
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ ep->xfer_buff += len;
+
+ if (ep->xfer_len_db > ep->maxpacket)
+ {
+ ep->xfer_len_db -= len;
+ }
+ else
+ {
+ len = ep->xfer_len_db;
+ ep->xfer_len_db = 0U;
+ }
+
+ if (len > 0U)
+ {
+ /* Set the Double buffer counter for pmabuffer0 */
+ PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
+ pmabuffer = ep->pmaaddr0;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ }
}
else
{
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ ep->xfer_buff += len;
+
+ if (ep->xfer_len_db > ep->maxpacket)
+ {
+ ep->xfer_len_db -= len;
+ }
+ else
+ {
+ len = ep->xfer_len_db;
+ ep->xfer_len_db = 0U;
+ }
+
+ if (len > 0U)
+ {
+ /* Set the Double buffer counter for pmabuffer1 */
+ PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
+ pmabuffer = ep->pmaaddr1;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ }
}
- USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
- PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
}
}
@@ -2291,7 +2333,7 @@
{
if (ep->doublebuffer == 0U)
{
- /* Multi packet transfer*/
+ /* Multi packet transfer */
if (ep->xfer_len > ep->maxpacket)
{
len = ep->maxpacket;
@@ -2303,21 +2345,22 @@
ep->xfer_len = 0U;
}
/* configure and validate Rx endpoint */
- /*Set RX buffer count*/
PCD_SET_EP_RX_CNT(USBx, ep->num, len);
}
else
{
- /*First Transfer Coming From HAL_PCD_EP_Receive & From ISR*/
- /*Set the Double buffer counter*/
+ /* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */
+ /* Set the Double buffer counter */
if (ep->type == EP_TYPE_BULK)
{
PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket);
- /*Coming from ISR*/
+
+ /* Coming from ISR */
if (ep->xfer_count != 0U)
{
- /* update last value to check if there is blocking state*/
+ /* update last value to check if there is blocking state */
wEPVal = PCD_GET_ENDPOINT(USBx, ep->num);
+
/*Blocking State */
if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) ||
(((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U)))
@@ -2326,10 +2369,10 @@
}
}
}
- /*iso out double */
+ /* iso out double */
else if (ep->type == EP_TYPE_ISOC)
{
- /* Multi packet transfer*/
+ /* Multi packet transfer */
if (ep->xfer_len > ep->maxpacket)
{
len = ep->maxpacket;
@@ -2354,54 +2397,11 @@
return HAL_OK;
}
-/**
- * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : pointer to source buffer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to write
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(src);
- UNUSED(ch_ep_num);
- UNUSED(len);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
/**
- * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param dest : destination pointer
- * @param len : Number of bytes to read
- * @retval pointer to destination buffer
- */
-void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(USBx);
- UNUSED(dest);
- UNUSED(len);
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return ((void *)NULL);
-}
-
-/**
- * @brief USB_EPSetStall : set a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
+ * @brief USB_EPSetStall set a stall condition over an EP
+ * @param USBx Selected device
+ * @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
@@ -2419,9 +2419,9 @@
}
/**
- * @brief USB_EPClearStall : Clear a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
+ * @brief USB_EPClearStall Clear a stall condition over an EP
+ * @param USBx Selected device
+ * @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
@@ -2442,17 +2442,18 @@
{
PCD_CLEAR_RX_DTOG(USBx, ep->num);
- /* Configure VALID status for the Endpoint*/
+ /* Configure VALID status for the Endpoint */
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
}
}
return HAL_OK;
}
+#endif
/**
- * @brief USB_StopDevice : Stop the usb device mode
- * @param USBx : Selected device
+ * @brief USB_StopDevice Stop the usb device mode
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx)
@@ -2470,9 +2471,9 @@
}
/**
- * @brief USB_SetDevAddress : Stop the usb device mode
- * @param USBx : Selected device
- * @param address : new device address to be assigned
+ * @brief USB_SetDevAddress Stop the usb device mode
+ * @param USBx Selected device
+ * @param address new device address to be assigned
* This parameter can be a value from 0 to 255
* @retval HAL status
*/
@@ -2488,8 +2489,8 @@
}
/**
- * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
- * @param USBx : Selected device
+ * @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx)
@@ -2501,8 +2502,8 @@
}
/**
- * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
- * @param USBx : Selected device
+ * @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DevDisconnect(USB_TypeDef *USBx)
@@ -2514,8 +2515,8 @@
}
/**
- * @brief USB_ReadInterrupts: return the global USB interrupt status
- * @param USBx : Selected device
+ * @brief USB_ReadInterrupts return the global USB interrupt status
+ * @param USBx Selected device
* @retval HAL status
*/
uint32_t USB_ReadInterrupts(USB_TypeDef *USBx)
@@ -2527,8 +2528,8 @@
}
/**
- * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
- * @param USBx : Selected device
+ * @brief USB_ReadDevAllOutEpInterrupt return the USB device OUT endpoints interrupt status
+ * @param USBx Selected device
* @retval HAL status
*/
uint32_t USB_ReadDevAllOutEpInterrupt(USB_TypeDef *USBx)
@@ -2543,8 +2544,8 @@
}
/**
- * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
- * @param USBx : Selected device
+ * @brief USB_ReadDevAllInEpInterrupt return the USB device IN endpoints interrupt status
+ * @param USBx Selected device
* @retval HAL status
*/
uint32_t USB_ReadDevAllInEpInterrupt(USB_TypeDef *USBx)
@@ -2560,8 +2561,8 @@
/**
* @brief Returns Device OUT EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
+ * @param USBx Selected device
+ * @param epnum endpoint number
* This parameter can be a value from 0 to 15
* @retval Device OUT EP Interrupt register
*/
@@ -2579,8 +2580,8 @@
/**
* @brief Returns Device IN EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
+ * @param USBx Selected device
+ * @param epnum endpoint number
* This parameter can be a value from 0 to 15
* @retval Device IN EP Interrupt register
*/
@@ -2598,7 +2599,7 @@
/**
* @brief USB_ClearInterrupts: clear a USB interrupt
- * @param USBx Selected device
+ * @param USBx Selected device
* @param interrupt flag
* @retval None
*/
@@ -2615,8 +2616,8 @@
/**
* @brief Prepare the EP0 to start the first control setup
- * @param USBx Selected device
- * @param psetup pointer to setup packet
+ * @param USBx Selected device
+ * @param psetup pointer to setup packet
* @retval HAL status
*/
HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup)
@@ -2633,7 +2634,7 @@
/**
* @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
- * @param USBx Selected device
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx)
@@ -2644,13 +2645,14 @@
}
/**
- * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
- * @param USBx Selected device
+ * @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling
+ * @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx)
{
USBx->CNTR &= (uint16_t)(~USB_CNTR_RESUME);
+
return HAL_OK;
}
@@ -2659,7 +2661,7 @@
* @param USBx USB peripheral instance register address.
* @param pbUsrBuf pointer to user memory area.
* @param wPMABufAddr address into PMA.
- * @param wNBytes: no. of bytes to be copied.
+ * @param wNBytes no. of bytes to be copied.
* @retval None
*/
void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
@@ -2690,10 +2692,10 @@
/**
* @brief Copy data from packet memory area (PMA) to user memory buffer
- * @param USBx: USB peripheral instance register address.
+ * @param USBx USB peripheral instance register address.
* @param pbUsrBuf pointer to user memory area.
* @param wPMABufAddr address into PMA.
- * @param wNBytes: no. of bytes to be copied.
+ * @param wNBytes no. of bytes to be copied.
* @retval None
*/
void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
diff --git a/_htmresc/Add button.svg b/_htmresc/Add button.svg
new file mode 100644
index 0000000..c211545
--- /dev/null
+++ b/_htmresc/Add button.svg
@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
diff --git a/_htmresc/Update.svg b/_htmresc/Update.svg
new file mode 100644
index 0000000..f88381f
--- /dev/null
+++ b/_htmresc/Update.svg
@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
diff --git a/_htmresc/favicon.png b/_htmresc/favicon.png
new file mode 100644
index 0000000..06713ee
--- /dev/null
+++ b/_htmresc/favicon.png
Binary files differ
diff --git a/_htmresc/mini-st_2020.css b/_htmresc/mini-st_2020.css
new file mode 100644
index 0000000..986f4d4
--- /dev/null
+++ b/_htmresc/mini-st_2020.css
@@ -0,0 +1,1711 @@
+@charset "UTF-8";
+/*
+ Flavor name: Custom (mini-custom)
+ Generated online - https://minicss.org/flavors
+ mini.css version: v3.0.1
+*/
+/*
+ Browsers resets and base typography.
+*/
+/* Core module CSS variable definitions */
+:root {
+ --fore-color: #03234b;
+ --secondary-fore-color: #03234b;
+ --back-color: #ffffff;
+ --secondary-back-color: #ffffff;
+ --blockquote-color: #e6007e;
+ --pre-color: #e6007e;
+ --border-color: #3cb4e6;
+ --secondary-border-color: #3cb4e6;
+ --heading-ratio: 1.2;
+ --universal-margin: 0.5rem;
+ --universal-padding: 0.25rem;
+ --universal-border-radius: 0.075rem;
+ --background-margin: 1.5%;
+ --a-link-color: #3cb4e6;
+ --a-visited-color: #8c0078; }
+
+html {
+ font-size: 13.5px; }
+
+a, b, del, em, i, ins, q, span, strong, u {
+ font-size: 1em; }
+
+html, * {
+ font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif;
+ line-height: 1.25;
+ -webkit-text-size-adjust: 100%; }
+
+* {
+ font-size: 1rem; }
+
+body {
+ margin: 0;
+ color: var(--fore-color);
+ @background: var(--back-color);
+ background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top;
+ background-size: var(--background-margin);
+ }
+
+details {
+ display: block; }
+
+summary {
+ display: list-item; }
+
+abbr[title] {
+ border-bottom: none;
+ text-decoration: underline dotted; }
+
+input {
+ overflow: visible; }
+
+img {
+ max-width: 100%;
+ height: auto; }
+
+h1, h2, h3, h4, h5, h6 {
+ line-height: 1.25;
+ margin: calc(1.5 * var(--universal-margin)) var(--universal-margin);
+ font-weight: 400; }
+ h1 small, h2 small, h3 small, h4 small, h5 small, h6 small {
+ color: var(--secondary-fore-color);
+ display: block;
+ margin-top: -0.25rem; }
+
+h1 {
+ font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); }
+
+h2 {
+ font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) );
+ border-style: none none solid none ;
+ border-width: thin;
+ border-color: var(--border-color); }
+h3 {
+ font-size: calc(1rem * var(--heading-ratio) ); }
+
+h4 {
+ font-size: calc(1rem * var(--heading-ratio)); }
+
+h5 {
+ font-size: 1rem; }
+
+h6 {
+ font-size: calc(1rem / var(--heading-ratio)); }
+
+p {
+ margin: var(--universal-margin); }
+
+ol, ul {
+ margin: var(--universal-margin);
+ padding-left: calc(3 * var(--universal-margin)); }
+
+b, strong {
+ font-weight: 700; }
+
+hr {
+ box-sizing: content-box;
+ border: 0;
+ line-height: 1.25em;
+ margin: var(--universal-margin);
+ height: 0.0714285714rem;
+ background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); }
+
+blockquote {
+ display: block;
+ position: relative;
+ font-style: italic;
+ color: var(--secondary-fore-color);
+ margin: var(--universal-margin);
+ padding: calc(3 * var(--universal-padding));
+ border: 0.0714285714rem solid var(--secondary-border-color);
+ border-left: 0.3rem solid var(--blockquote-color);
+ border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+ blockquote:before {
+ position: absolute;
+ top: calc(0rem - var(--universal-padding));
+ left: 0;
+ font-family: sans-serif;
+ font-size: 2rem;
+ font-weight: 800;
+ content: "\201c";
+ color: var(--blockquote-color); }
+ blockquote[cite]:after {
+ font-style: normal;
+ font-size: 0.75em;
+ font-weight: 700;
+ content: "\a— " attr(cite);
+ white-space: pre; }
+
+code, kbd, pre, samp {
+ font-family: Menlo, Consolas, monospace;
+ font-size: 0.85em; }
+
+code {
+ background: var(--secondary-back-color);
+ border-radius: var(--universal-border-radius);
+ padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+kbd {
+ background: var(--fore-color);
+ color: var(--back-color);
+ border-radius: var(--universal-border-radius);
+ padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); }
+
+pre {
+ overflow: auto;
+ background: var(--secondary-back-color);
+ padding: calc(1.5 * var(--universal-padding));
+ margin: var(--universal-margin);
+ border: 0.0714285714rem solid var(--secondary-border-color);
+ border-left: 0.2857142857rem solid var(--pre-color);
+ border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; }
+
+sup, sub, code, kbd {
+ line-height: 0;
+ position: relative;
+ vertical-align: baseline; }
+
+small, sup, sub, figcaption {
+ font-size: 0.75em; }
+
+sup {
+ top: -0.5em; }
+
+sub {
+ bottom: -0.25em; }
+
+figure {
+ margin: var(--universal-margin); }
+
+figcaption {
+ color: var(--secondary-fore-color); }
+
+a {
+ text-decoration: none; }
+ a:link {
+ color: var(--a-link-color); }
+ a:visited {
+ color: var(--a-visited-color); }
+ a:hover, a:focus {
+ text-decoration: underline; }
+
+/*
+ Definitions for the grid system, cards and containers.
+*/
+.container {
+ margin: 0 auto;
+ padding: 0 calc(1.5 * var(--universal-padding)); }
+
+.row {
+ box-sizing: border-box;
+ display: flex;
+ flex: 0 1 auto;
+ flex-flow: row wrap;
+ margin: 0 0 0 var(--background-margin); }
+
+.col-sm,
+[class^='col-sm-'],
+[class^='col-sm-offset-'],
+.row[class*='cols-sm-'] > * {
+ box-sizing: border-box;
+ flex: 0 0 auto;
+ padding: 0 calc(var(--universal-padding) / 2); }
+
+.col-sm,
+.row.cols-sm > * {
+ max-width: 100%;
+ flex-grow: 1;
+ flex-basis: 0; }
+
+.col-sm-1,
+.row.cols-sm-1 > * {
+ max-width: 8.3333333333%;
+ flex-basis: 8.3333333333%; }
+
+.col-sm-offset-0 {
+ margin-left: 0; }
+
+.col-sm-2,
+.row.cols-sm-2 > * {
+ max-width: 16.6666666667%;
+ flex-basis: 16.6666666667%; }
+
+.col-sm-offset-1 {
+ margin-left: 8.3333333333%; }
+
+.col-sm-3,
+.row.cols-sm-3 > * {
+ max-width: 25%;
+ flex-basis: 25%; }
+
+.col-sm-offset-2 {
+ margin-left: 16.6666666667%; }
+
+.col-sm-4,
+.row.cols-sm-4 > * {
+ max-width: 33.3333333333%;
+ flex-basis: 33.3333333333%; }
+
+.col-sm-offset-3 {
+ margin-left: 25%; }
+
+.col-sm-5,
+.row.cols-sm-5 > * {
+ max-width: 41.6666666667%;
+ flex-basis: 41.6666666667%; }
+
+.col-sm-offset-4 {
+ margin-left: 33.3333333333%; }
+
+.col-sm-6,
+.row.cols-sm-6 > * {
+ max-width: 50%;
+ flex-basis: 50%; }
+
+.col-sm-offset-5 {
+ margin-left: 41.6666666667%; }
+
+.col-sm-7,
+.row.cols-sm-7 > * {
+ max-width: 58.3333333333%;
+ flex-basis: 58.3333333333%; }
+
+.col-sm-offset-6 {
+ margin-left: 50%; }
+
+.col-sm-8,
+.row.cols-sm-8 > * {
+ max-width: 66.6666666667%;
+ flex-basis: 66.6666666667%; }
+
+.col-sm-offset-7 {
+ margin-left: 58.3333333333%; }
+
+.col-sm-9,
+.row.cols-sm-9 > * {
+ max-width: 75%;
+ flex-basis: 75%; }
+
+.col-sm-offset-8 {
+ margin-left: 66.6666666667%; }
+
+.col-sm-10,
+.row.cols-sm-10 > * {
+ max-width: 83.3333333333%;
+ flex-basis: 83.3333333333%; }
+
+.col-sm-offset-9 {
+ margin-left: 75%; }
+
+.col-sm-11,
+.row.cols-sm-11 > * {
+ max-width: 91.6666666667%;
+ flex-basis: 91.6666666667%; }
+
+.col-sm-offset-10 {
+ margin-left: 83.3333333333%; }
+
+.col-sm-12,
+.row.cols-sm-12 > * {
+ max-width: 100%;
+ flex-basis: 100%; }
+
+.col-sm-offset-11 {
+ margin-left: 91.6666666667%; }
+
+.col-sm-normal {
+ order: initial; }
+
+.col-sm-first {
+ order: -999; }
+
+.col-sm-last {
+ order: 999; }
+
+@media screen and (min-width: 500px) {
+ .col-md,
+ [class^='col-md-'],
+ [class^='col-md-offset-'],
+ .row[class*='cols-md-'] > * {
+ box-sizing: border-box;
+ flex: 0 0 auto;
+ padding: 0 calc(var(--universal-padding) / 2); }
+
+ .col-md,
+ .row.cols-md > * {
+ max-width: 100%;
+ flex-grow: 1;
+ flex-basis: 0; }
+
+ .col-md-1,
+ .row.cols-md-1 > * {
+ max-width: 8.3333333333%;
+ flex-basis: 8.3333333333%; }
+
+ .col-md-offset-0 {
+ margin-left: 0; }
+
+ .col-md-2,
+ .row.cols-md-2 > * {
+ max-width: 16.6666666667%;
+ flex-basis: 16.6666666667%; }
+
+ .col-md-offset-1 {
+ margin-left: 8.3333333333%; }
+
+ .col-md-3,
+ .row.cols-md-3 > * {
+ max-width: 25%;
+ flex-basis: 25%; }
+
+ .col-md-offset-2 {
+ margin-left: 16.6666666667%; }
+
+ .col-md-4,
+ .row.cols-md-4 > * {
+ max-width: 33.3333333333%;
+ flex-basis: 33.3333333333%; }
+
+ .col-md-offset-3 {
+ margin-left: 25%; }
+
+ .col-md-5,
+ .row.cols-md-5 > * {
+ max-width: 41.6666666667%;
+ flex-basis: 41.6666666667%; }
+
+ .col-md-offset-4 {
+ margin-left: 33.3333333333%; }
+
+ .col-md-6,
+ .row.cols-md-6 > * {
+ max-width: 50%;
+ flex-basis: 50%; }
+
+ .col-md-offset-5 {
+ margin-left: 41.6666666667%; }
+
+ .col-md-7,
+ .row.cols-md-7 > * {
+ max-width: 58.3333333333%;
+ flex-basis: 58.3333333333%; }
+
+ .col-md-offset-6 {
+ margin-left: 50%; }
+
+ .col-md-8,
+ .row.cols-md-8 > * {
+ max-width: 66.6666666667%;
+ flex-basis: 66.6666666667%; }
+
+ .col-md-offset-7 {
+ margin-left: 58.3333333333%; }
+
+ .col-md-9,
+ .row.cols-md-9 > * {
+ max-width: 75%;
+ flex-basis: 75%; }
+
+ .col-md-offset-8 {
+ margin-left: 66.6666666667%; }
+
+ .col-md-10,
+ .row.cols-md-10 > * {
+ max-width: 83.3333333333%;
+ flex-basis: 83.3333333333%; }
+
+ .col-md-offset-9 {
+ margin-left: 75%; }
+
+ .col-md-11,
+ .row.cols-md-11 > * {
+ max-width: 91.6666666667%;
+ flex-basis: 91.6666666667%; }
+
+ .col-md-offset-10 {
+ margin-left: 83.3333333333%; }
+
+ .col-md-12,
+ .row.cols-md-12 > * {
+ max-width: 100%;
+ flex-basis: 100%; }
+
+ .col-md-offset-11 {
+ margin-left: 91.6666666667%; }
+
+ .col-md-normal {
+ order: initial; }
+
+ .col-md-first {
+ order: -999; }
+
+ .col-md-last {
+ order: 999; } }
+@media screen and (min-width: 1280px) {
+ .col-lg,
+ [class^='col-lg-'],
+ [class^='col-lg-offset-'],
+ .row[class*='cols-lg-'] > * {
+ box-sizing: border-box;
+ flex: 0 0 auto;
+ padding: 0 calc(var(--universal-padding) / 2); }
+
+ .col-lg,
+ .row.cols-lg > * {
+ max-width: 100%;
+ flex-grow: 1;
+ flex-basis: 0; }
+
+ .col-lg-1,
+ .row.cols-lg-1 > * {
+ max-width: 8.3333333333%;
+ flex-basis: 8.3333333333%; }
+
+ .col-lg-offset-0 {
+ margin-left: 0; }
+
+ .col-lg-2,
+ .row.cols-lg-2 > * {
+ max-width: 16.6666666667%;
+ flex-basis: 16.6666666667%; }
+
+ .col-lg-offset-1 {
+ margin-left: 8.3333333333%; }
+
+ .col-lg-3,
+ .row.cols-lg-3 > * {
+ max-width: 25%;
+ flex-basis: 25%; }
+
+ .col-lg-offset-2 {
+ margin-left: 16.6666666667%; }
+
+ .col-lg-4,
+ .row.cols-lg-4 > * {
+ max-width: 33.3333333333%;
+ flex-basis: 33.3333333333%; }
+
+ .col-lg-offset-3 {
+ margin-left: 25%; }
+
+ .col-lg-5,
+ .row.cols-lg-5 > * {
+ max-width: 41.6666666667%;
+ flex-basis: 41.6666666667%; }
+
+ .col-lg-offset-4 {
+ margin-left: 33.3333333333%; }
+
+ .col-lg-6,
+ .row.cols-lg-6 > * {
+ max-width: 50%;
+ flex-basis: 50%; }
+
+ .col-lg-offset-5 {
+ margin-left: 41.6666666667%; }
+
+ .col-lg-7,
+ .row.cols-lg-7 > * {
+ max-width: 58.3333333333%;
+ flex-basis: 58.3333333333%; }
+
+ .col-lg-offset-6 {
+ margin-left: 50%; }
+
+ .col-lg-8,
+ .row.cols-lg-8 > * {
+ max-width: 66.6666666667%;
+ flex-basis: 66.6666666667%; }
+
+ .col-lg-offset-7 {
+ margin-left: 58.3333333333%; }
+
+ .col-lg-9,
+ .row.cols-lg-9 > * {
+ max-width: 75%;
+ flex-basis: 75%; }
+
+ .col-lg-offset-8 {
+ margin-left: 66.6666666667%; }
+
+ .col-lg-10,
+ .row.cols-lg-10 > * {
+ max-width: 83.3333333333%;
+ flex-basis: 83.3333333333%; }
+
+ .col-lg-offset-9 {
+ margin-left: 75%; }
+
+ .col-lg-11,
+ .row.cols-lg-11 > * {
+ max-width: 91.6666666667%;
+ flex-basis: 91.6666666667%; }
+
+ .col-lg-offset-10 {
+ margin-left: 83.3333333333%; }
+
+ .col-lg-12,
+ .row.cols-lg-12 > * {
+ max-width: 100%;
+ flex-basis: 100%; }
+
+ .col-lg-offset-11 {
+ margin-left: 91.6666666667%; }
+
+ .col-lg-normal {
+ order: initial; }
+
+ .col-lg-first {
+ order: -999; }
+
+ .col-lg-last {
+ order: 999; } }
+/* Card component CSS variable definitions */
+:root {
+ --card-back-color: #3cb4e6;
+ --card-fore-color: #03234b;
+ --card-border-color: #03234b; }
+
+.card {
+ display: flex;
+ flex-direction: column;
+ justify-content: space-between;
+ align-self: center;
+ position: relative;
+ width: 100%;
+ background: var(--card-back-color);
+ color: var(--card-fore-color);
+ border: 0.0714285714rem solid var(--card-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: var(--universal-margin);
+ overflow: hidden; }
+ @media screen and (min-width: 320px) {
+ .card {
+ max-width: 320px; } }
+ .card > .sectione {
+ background: var(--card-back-color);
+ color: var(--card-fore-color);
+ box-sizing: border-box;
+ margin: 0;
+ border: 0;
+ border-radius: 0;
+ border-bottom: 0.0714285714rem solid var(--card-border-color);
+ padding: var(--universal-padding);
+ width: 100%; }
+ .card > .sectione.media {
+ height: 200px;
+ padding: 0;
+ -o-object-fit: cover;
+ object-fit: cover; }
+ .card > .sectione:last-child {
+ border-bottom: 0; }
+
+/*
+ Custom elements for card elements.
+*/
+@media screen and (min-width: 240px) {
+ .card.small {
+ max-width: 240px; } }
+@media screen and (min-width: 480px) {
+ .card.large {
+ max-width: 480px; } }
+.card.fluid {
+ max-width: 100%;
+ width: auto; }
+
+.card.warning {
+ --card-back-color: #e5b8b7;
+ --card-fore-color: #3b234b;
+ --card-border-color: #8c0078; }
+
+.card.error {
+ --card-back-color: #464650;
+ --card-fore-color: #ffffff;
+ --card-border-color: #8c0078; }
+
+.card > .sectione.dark {
+ --card-back-color: #3b234b;
+ --card-fore-color: #ffffff; }
+
+.card > .sectione.double-padded {
+ padding: calc(1.5 * var(--universal-padding)); }
+
+/*
+ Definitions for forms and input elements.
+*/
+/* Input_control module CSS variable definitions */
+:root {
+ --form-back-color: #ffe97f;
+ --form-fore-color: #03234b;
+ --form-border-color: #3cb4e6;
+ --input-back-color: #ffffff;
+ --input-fore-color: #03234b;
+ --input-border-color: #3cb4e6;
+ --input-focus-color: #0288d1;
+ --input-invalid-color: #d32f2f;
+ --button-back-color: #e2e2e2;
+ --button-hover-back-color: #dcdcdc;
+ --button-fore-color: #212121;
+ --button-border-color: transparent;
+ --button-hover-border-color: transparent;
+ --button-group-border-color: rgba(124, 124, 124, 0.54); }
+
+form {
+ background: var(--form-back-color);
+ color: var(--form-fore-color);
+ border: 0.0714285714rem solid var(--form-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: var(--universal-margin);
+ padding: calc(2 * var(--universal-padding)) var(--universal-padding); }
+
+fieldset {
+ border: 0.0714285714rem solid var(--form-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: calc(var(--universal-margin) / 4);
+ padding: var(--universal-padding); }
+
+legend {
+ box-sizing: border-box;
+ display: table;
+ max-width: 100%;
+ white-space: normal;
+ font-weight: 500;
+ padding: calc(var(--universal-padding) / 2); }
+
+label {
+ padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+.input-group {
+ display: inline-block; }
+ .input-group.fluid {
+ display: flex;
+ align-items: center;
+ justify-content: center; }
+ .input-group.fluid > input {
+ max-width: 100%;
+ flex-grow: 1;
+ flex-basis: 0px; }
+ @media screen and (max-width: 499px) {
+ .input-group.fluid {
+ align-items: stretch;
+ flex-direction: column; } }
+ .input-group.vertical {
+ display: flex;
+ align-items: stretch;
+ flex-direction: column; }
+ .input-group.vertical > input {
+ max-width: 100%;
+ flex-grow: 1;
+ flex-basis: 0px; }
+
+[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button {
+ height: auto; }
+
+[type="search"] {
+ -webkit-appearance: textfield;
+ outline-offset: -2px; }
+
+[type="search"]::-webkit-search-cancel-button,
+[type="search"]::-webkit-search-decoration {
+ -webkit-appearance: none; }
+
+input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"],
+[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select {
+ box-sizing: border-box;
+ background: var(--input-back-color);
+ color: var(--input-fore-color);
+ border: 0.0714285714rem solid var(--input-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: calc(var(--universal-margin) / 2);
+ padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus {
+ border-color: var(--input-focus-color);
+ box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid {
+ border-color: var(--input-invalid-color);
+ box-shadow: none; }
+input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] {
+ background: var(--secondary-back-color); }
+
+select {
+ max-width: 100%; }
+
+option {
+ overflow: hidden;
+ text-overflow: ellipsis; }
+
+[type="checkbox"], [type="radio"] {
+ -webkit-appearance: none;
+ -moz-appearance: none;
+ appearance: none;
+ position: relative;
+ height: calc(1rem + var(--universal-padding) / 2);
+ width: calc(1rem + var(--universal-padding) / 2);
+ vertical-align: text-bottom;
+ padding: 0;
+ flex-basis: calc(1rem + var(--universal-padding) / 2) !important;
+ flex-grow: 0 !important; }
+ [type="checkbox"]:checked:before, [type="radio"]:checked:before {
+ position: absolute; }
+
+[type="checkbox"]:checked:before {
+ content: '\2713';
+ font-family: sans-serif;
+ font-size: calc(1rem + var(--universal-padding) / 2);
+ top: calc(0rem - var(--universal-padding));
+ left: calc(var(--universal-padding) / 4); }
+
+[type="radio"] {
+ border-radius: 100%; }
+ [type="radio"]:checked:before {
+ border-radius: 100%;
+ content: '';
+ top: calc(0.0714285714rem + var(--universal-padding) / 2);
+ left: calc(0.0714285714rem + var(--universal-padding) / 2);
+ background: var(--input-fore-color);
+ width: 0.5rem;
+ height: 0.5rem; }
+
+:placeholder-shown {
+ color: var(--input-fore-color); }
+
+::-ms-placeholder {
+ color: var(--input-fore-color);
+ opacity: 0.54; }
+
+button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner {
+ border-style: none;
+ padding: 0; }
+
+button, html [type="button"], [type="reset"], [type="submit"] {
+ -webkit-appearance: button; }
+
+button {
+ overflow: visible;
+ text-transform: none; }
+
+button, [type="button"], [type="submit"], [type="reset"],
+a.button, label.button, .button,
+a[role="button"], label[role="button"], [role="button"] {
+ display: inline-block;
+ background: var(--button-back-color);
+ color: var(--button-fore-color);
+ border: 0.0714285714rem solid var(--button-border-color);
+ border-radius: var(--universal-border-radius);
+ padding: var(--universal-padding) calc(1.5 * var(--universal-padding));
+ margin: var(--universal-margin);
+ text-decoration: none;
+ cursor: pointer;
+ transition: background 0.3s; }
+ button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus,
+ a.button:hover,
+ a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus,
+ a[role="button"]:hover,
+ a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus {
+ background: var(--button-hover-back-color);
+ border-color: var(--button-hover-border-color); }
+
+input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] {
+ cursor: not-allowed;
+ opacity: 0.75; }
+
+.button-group {
+ display: flex;
+ border: 0.0714285714rem solid var(--button-group-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: var(--universal-margin); }
+ .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] {
+ margin: 0;
+ max-width: 100%;
+ flex: 1 1 auto;
+ text-align: center;
+ border: 0;
+ border-radius: 0;
+ box-shadow: none; }
+ .button-group > :not(:first-child) {
+ border-left: 0.0714285714rem solid var(--button-group-border-color); }
+ @media screen and (max-width: 499px) {
+ .button-group {
+ flex-direction: column; }
+ .button-group > :not(:first-child) {
+ border: 0;
+ border-top: 0.0714285714rem solid var(--button-group-border-color); } }
+
+/*
+ Custom elements for forms and input elements.
+*/
+button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary {
+ --button-back-color: #1976d2;
+ --button-fore-color: #f8f8f8; }
+ button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus {
+ --button-hover-back-color: #1565c0; }
+
+button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary {
+ --button-back-color: #d32f2f;
+ --button-fore-color: #f8f8f8; }
+ button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus {
+ --button-hover-back-color: #c62828; }
+
+button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary {
+ --button-back-color: #308732;
+ --button-fore-color: #f8f8f8; }
+ button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus {
+ --button-hover-back-color: #277529; }
+
+button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse {
+ --button-back-color: #212121;
+ --button-fore-color: #f8f8f8; }
+ button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus {
+ --button-hover-back-color: #111; }
+
+button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small {
+ padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding));
+ margin: var(--universal-margin); }
+
+button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large {
+ padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding));
+ margin: var(--universal-margin); }
+
+/*
+ Definitions for navigation elements.
+*/
+/* Navigation module CSS variable definitions */
+:root {
+ --header-back-color: #03234b;
+ --header-hover-back-color: #ffd200;
+ --header-fore-color: #ffffff;
+ --header-border-color: #3cb4e6;
+ --nav-back-color: #ffffff;
+ --nav-hover-back-color: #ffe97f;
+ --nav-fore-color: #e6007e;
+ --nav-border-color: #3cb4e6;
+ --nav-link-color: #3cb4e6;
+ --footer-fore-color: #ffffff;
+ --footer-back-color: #03234b;
+ --footer-border-color: #3cb4e6;
+ --footer-link-color: #3cb4e6;
+ --drawer-back-color: #ffffff;
+ --drawer-hover-back-color: #ffe97f;
+ --drawer-border-color: #3cb4e6;
+ --drawer-close-color: #e6007e; }
+
+header {
+ height: 2.75rem;
+ background: var(--header-back-color);
+ color: var(--header-fore-color);
+ border-bottom: 0.0714285714rem solid var(--header-border-color);
+ padding: calc(var(--universal-padding) / 4) 0;
+ white-space: nowrap;
+ overflow-x: auto;
+ overflow-y: hidden; }
+ header.row {
+ box-sizing: content-box; }
+ header .logo {
+ color: var(--header-fore-color);
+ font-size: 1.75rem;
+ padding: var(--universal-padding) calc(2 * var(--universal-padding));
+ text-decoration: none; }
+ header button, header [type="button"], header .button, header [role="button"] {
+ box-sizing: border-box;
+ position: relative;
+ top: calc(0rem - var(--universal-padding) / 4);
+ height: calc(3.1875rem + var(--universal-padding) / 2);
+ background: var(--header-back-color);
+ line-height: calc(3.1875rem - var(--universal-padding) * 1.5);
+ text-align: center;
+ color: var(--header-fore-color);
+ border: 0;
+ border-radius: 0;
+ margin: 0;
+ text-transform: uppercase; }
+ header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus {
+ background: var(--header-hover-back-color); }
+
+nav {
+ background: var(--nav-back-color);
+ color: var(--nav-fore-color);
+ border: 0.0714285714rem solid var(--nav-border-color);
+ border-radius: var(--universal-border-radius);
+ margin: var(--universal-margin); }
+ nav * {
+ padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); }
+ nav a, nav a:visited {
+ display: block;
+ color: var(--nav-link-color);
+ border-radius: var(--universal-border-radius);
+ transition: background 0.3s; }
+ nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus {
+ text-decoration: none;
+ background: var(--nav-hover-back-color); }
+ nav .sublink-1 {
+ position: relative;
+ margin-left: calc(2 * var(--universal-padding)); }
+ nav .sublink-1:before {
+ position: absolute;
+ left: calc(var(--universal-padding) - 1 * var(--universal-padding));
+ top: -0.0714285714rem;
+ content: '';
+ height: 100%;
+ border: 0.0714285714rem solid var(--nav-border-color);
+ border-left: 0; }
+ nav .sublink-2 {
+ position: relative;
+ margin-left: calc(4 * var(--universal-padding)); }
+ nav .sublink-2:before {
+ position: absolute;
+ left: calc(var(--universal-padding) - 3 * var(--universal-padding));
+ top: -0.0714285714rem;
+ content: '';
+ height: 100%;
+ border: 0.0714285714rem solid var(--nav-border-color);
+ border-left: 0; }
+
+footer {
+ background: var(--footer-back-color);
+ color: var(--footer-fore-color);
+ border-top: 0.0714285714rem solid var(--footer-border-color);
+ padding: calc(2 * var(--universal-padding)) var(--universal-padding);
+ font-size: 0.875rem; }
+ footer a, footer a:visited {
+ color: var(--footer-link-color); }
+
+header.sticky {
+ position: -webkit-sticky;
+ position: sticky;
+ z-index: 1101;
+ top: 0; }
+
+footer.sticky {
+ position: -webkit-sticky;
+ position: sticky;
+ z-index: 1101;
+ bottom: 0; }
+
+.drawer-toggle:before {
+ display: inline-block;
+ position: relative;
+ vertical-align: bottom;
+ content: '\00a0\2261\00a0';
+ font-family: sans-serif;
+ font-size: 1.5em; }
+@media screen and (min-width: 500px) {
+ .drawer-toggle:not(.persistent) {
+ display: none; } }
+
+[type="checkbox"].drawer {
+ height: 1px;
+ width: 1px;
+ margin: -1px;
+ overflow: hidden;
+ position: absolute;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%); }
+ [type="checkbox"].drawer + * {
+ display: block;
+ box-sizing: border-box;
+ position: fixed;
+ top: 0;
+ width: 320px;
+ height: 100vh;
+ overflow-y: auto;
+ background: var(--drawer-back-color);
+ border: 0.0714285714rem solid var(--drawer-border-color);
+ border-radius: 0;
+ margin: 0;
+ z-index: 1110;
+ right: -320px;
+ transition: right 0.3s; }
+ [type="checkbox"].drawer + * .drawer-close {
+ position: absolute;
+ top: var(--universal-margin);
+ right: var(--universal-margin);
+ z-index: 1111;
+ width: 2rem;
+ height: 2rem;
+ border-radius: var(--universal-border-radius);
+ padding: var(--universal-padding);
+ margin: 0;
+ cursor: pointer;
+ transition: background 0.3s; }
+ [type="checkbox"].drawer + * .drawer-close:before {
+ display: block;
+ content: '\00D7';
+ color: var(--drawer-close-color);
+ position: relative;
+ font-family: sans-serif;
+ font-size: 2rem;
+ line-height: 1;
+ text-align: center; }
+ [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus {
+ background: var(--drawer-hover-back-color); }
+ @media screen and (max-width: 320px) {
+ [type="checkbox"].drawer + * {
+ width: 100%; } }
+ [type="checkbox"].drawer:checked + * {
+ right: 0; }
+ @media screen and (min-width: 500px) {
+ [type="checkbox"].drawer:not(.persistent) + * {
+ position: static;
+ height: 100%;
+ z-index: 1100; }
+ [type="checkbox"].drawer:not(.persistent) + * .drawer-close {
+ display: none; } }
+
+/*
+ Definitions for the responsive table component.
+*/
+/* Table module CSS variable definitions. */
+:root {
+ --table-border-color: #03234b;
+ --table-border-separator-color: #03234b;
+ --table-head-back-color: #03234b;
+ --table-head-fore-color: #ffffff;
+ --table-body-back-color: #ffffff;
+ --table-body-fore-color: #03234b;
+ --table-body-alt-back-color: #f4f4f4; }
+
+table {
+ border-collapse: separate;
+ border-spacing: 0;
+ margin: 0;
+ display: flex;
+ flex: 0 1 auto;
+ flex-flow: row wrap;
+ padding: var(--universal-padding);
+ padding-top: 0; }
+ table caption {
+ font-size: 1rem;
+ margin: calc(2 * var(--universal-margin)) 0;
+ max-width: 100%;
+ flex: 0 0 100%; }
+ table thead, table tbody {
+ display: flex;
+ flex-flow: row wrap;
+ border: 0.0714285714rem solid var(--table-border-color); }
+ table thead {
+ z-index: 999;
+ border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0;
+ border-bottom: 0.0714285714rem solid var(--table-border-separator-color); }
+ table tbody {
+ border-top: 0;
+ margin-top: calc(0 - var(--universal-margin));
+ border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+ table tr {
+ display: flex;
+ padding: 0; }
+ table th, table td {
+ padding: calc(0.5 * var(--universal-padding));
+ font-size: 0.9rem; }
+ table th {
+ text-align: left;
+ background: var(--table-head-back-color);
+ color: var(--table-head-fore-color); }
+ table td {
+ background: var(--table-body-back-color);
+ color: var(--table-body-fore-color);
+ border-top: 0.0714285714rem solid var(--table-border-color); }
+
+table:not(.horizontal) {
+ overflow: auto;
+ max-height: 100%; }
+ table:not(.horizontal) thead, table:not(.horizontal) tbody {
+ max-width: 100%;
+ flex: 0 0 100%; }
+ table:not(.horizontal) tr {
+ flex-flow: row wrap;
+ flex: 0 0 100%; }
+ table:not(.horizontal) th, table:not(.horizontal) td {
+ flex: 1 0 0%;
+ overflow: hidden;
+ text-overflow: ellipsis; }
+ table:not(.horizontal) thead {
+ position: sticky;
+ top: 0; }
+ table:not(.horizontal) tbody tr:first-child td {
+ border-top: 0; }
+
+table.horizontal {
+ border: 0; }
+ table.horizontal thead, table.horizontal tbody {
+ border: 0;
+ flex: .2 0 0;
+ flex-flow: row nowrap; }
+ table.horizontal tbody {
+ overflow: auto;
+ justify-content: space-between;
+ flex: .8 0 0;
+ margin-left: 0;
+ padding-bottom: calc(var(--universal-padding) / 4); }
+ table.horizontal tr {
+ flex-direction: column;
+ flex: 1 0 auto; }
+ table.horizontal th, table.horizontal td {
+ width: auto;
+ border: 0;
+ border-bottom: 0.0714285714rem solid var(--table-border-color); }
+ table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) {
+ border-top: 0; }
+ table.horizontal th {
+ text-align: right;
+ border-left: 0.0714285714rem solid var(--table-border-color);
+ border-right: 0.0714285714rem solid var(--table-border-separator-color); }
+ table.horizontal thead tr:first-child {
+ padding-left: 0; }
+ table.horizontal th:first-child, table.horizontal td:first-child {
+ border-top: 0.0714285714rem solid var(--table-border-color); }
+ table.horizontal tbody tr:last-child td {
+ border-right: 0.0714285714rem solid var(--table-border-color); }
+ table.horizontal tbody tr:last-child td:first-child {
+ border-top-right-radius: 0.25rem; }
+ table.horizontal tbody tr:last-child td:last-child {
+ border-bottom-right-radius: 0.25rem; }
+ table.horizontal thead tr:first-child th:first-child {
+ border-top-left-radius: 0.25rem; }
+ table.horizontal thead tr:first-child th:last-child {
+ border-bottom-left-radius: 0.25rem; }
+
+@media screen and (max-width: 499px) {
+ table, table.horizontal {
+ border-collapse: collapse;
+ border: 0;
+ width: 100%;
+ display: table; }
+ table thead, table th, table.horizontal thead, table.horizontal th {
+ border: 0;
+ height: 1px;
+ width: 1px;
+ margin: -1px;
+ overflow: hidden;
+ padding: 0;
+ position: absolute;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%); }
+ table tbody, table.horizontal tbody {
+ border: 0;
+ display: table-row-group; }
+ table tr, table.horizontal tr {
+ display: block;
+ border: 0.0714285714rem solid var(--table-border-color);
+ border-radius: var(--universal-border-radius);
+ background: #ffffff;
+ padding: var(--universal-padding);
+ margin: var(--universal-margin);
+ margin-bottom: calc(1 * var(--universal-margin)); }
+ table th, table td, table.horizontal th, table.horizontal td {
+ width: auto; }
+ table td, table.horizontal td {
+ display: block;
+ border: 0;
+ text-align: right; }
+ table td:before, table.horizontal td:before {
+ content: attr(data-label);
+ float: left;
+ font-weight: 600; }
+ table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child {
+ border-top: 0; }
+ table tbody tr:last-child td, table.horizontal tbody tr:last-child td {
+ border-right: 0; } }
+table tr:nth-of-type(2n) > td {
+ background: var(--table-body-alt-back-color); }
+
+@media screen and (max-width: 500px) {
+ table tr:nth-of-type(2n) {
+ background: var(--table-body-alt-back-color); } }
+:root {
+ --table-body-hover-back-color: #90caf9; }
+
+table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+ background: var(--table-body-hover-back-color); }
+
+@media screen and (max-width: 500px) {
+ table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td {
+ background: var(--table-body-hover-back-color); } }
+/*
+ Definitions for contextual background elements, toasts and tooltips.
+*/
+/* Contextual module CSS variable definitions */
+:root {
+ --mark-back-color: #3cb4e6;
+ --mark-fore-color: #ffffff; }
+
+mark {
+ background: var(--mark-back-color);
+ color: var(--mark-fore-color);
+ font-size: 0.95em;
+ line-height: 1em;
+ border-radius: var(--universal-border-radius);
+ padding: calc(var(--universal-padding) / 4) var(--universal-padding); }
+ mark.inline-block {
+ display: inline-block;
+ font-size: 1em;
+ line-height: 1.4;
+ padding: calc(var(--universal-padding) / 2) var(--universal-padding); }
+
+:root {
+ --toast-back-color: #424242;
+ --toast-fore-color: #fafafa; }
+
+.toast {
+ position: fixed;
+ bottom: calc(var(--universal-margin) * 3);
+ left: 50%;
+ transform: translate(-50%, -50%);
+ z-index: 1111;
+ color: var(--toast-fore-color);
+ background: var(--toast-back-color);
+ border-radius: calc(var(--universal-border-radius) * 16);
+ padding: var(--universal-padding) calc(var(--universal-padding) * 3); }
+
+:root {
+ --tooltip-back-color: #212121;
+ --tooltip-fore-color: #fafafa; }
+
+.tooltip {
+ position: relative;
+ display: inline-block; }
+ .tooltip:before, .tooltip:after {
+ position: absolute;
+ opacity: 0;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%);
+ transition: all 0.3s;
+ z-index: 1010;
+ left: 50%; }
+ .tooltip:not(.bottom):before, .tooltip:not(.bottom):after {
+ bottom: 75%; }
+ .tooltip.bottom:before, .tooltip.bottom:after {
+ top: 75%; }
+ .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after {
+ opacity: 1;
+ clip: auto;
+ -webkit-clip-path: inset(0%);
+ clip-path: inset(0%); }
+ .tooltip:before {
+ content: '';
+ background: transparent;
+ border: var(--universal-margin) solid transparent;
+ left: calc(50% - var(--universal-margin)); }
+ .tooltip:not(.bottom):before {
+ border-top-color: #212121; }
+ .tooltip.bottom:before {
+ border-bottom-color: #212121; }
+ .tooltip:after {
+ content: attr(aria-label);
+ color: var(--tooltip-fore-color);
+ background: var(--tooltip-back-color);
+ border-radius: var(--universal-border-radius);
+ padding: var(--universal-padding);
+ white-space: nowrap;
+ transform: translateX(-50%); }
+ .tooltip:not(.bottom):after {
+ margin-bottom: calc(2 * var(--universal-margin)); }
+ .tooltip.bottom:after {
+ margin-top: calc(2 * var(--universal-margin)); }
+
+:root {
+ --modal-overlay-color: rgba(0, 0, 0, 0.45);
+ --modal-close-color: #e6007e;
+ --modal-close-hover-color: #ffe97f; }
+
+[type="checkbox"].modal {
+ height: 1px;
+ width: 1px;
+ margin: -1px;
+ overflow: hidden;
+ position: absolute;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%); }
+ [type="checkbox"].modal + div {
+ position: fixed;
+ top: 0;
+ left: 0;
+ display: none;
+ width: 100vw;
+ height: 100vh;
+ background: var(--modal-overlay-color); }
+ [type="checkbox"].modal + div .card {
+ margin: 0 auto;
+ max-height: 50vh;
+ overflow: auto; }
+ [type="checkbox"].modal + div .card .modal-close {
+ position: absolute;
+ top: 0;
+ right: 0;
+ width: 1.75rem;
+ height: 1.75rem;
+ border-radius: var(--universal-border-radius);
+ padding: var(--universal-padding);
+ margin: 0;
+ cursor: pointer;
+ transition: background 0.3s; }
+ [type="checkbox"].modal + div .card .modal-close:before {
+ display: block;
+ content: '\00D7';
+ color: var(--modal-close-color);
+ position: relative;
+ font-family: sans-serif;
+ font-size: 1.75rem;
+ line-height: 1;
+ text-align: center; }
+ [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus {
+ background: var(--modal-close-hover-color); }
+ [type="checkbox"].modal:checked + div {
+ display: flex;
+ flex: 0 1 auto;
+ z-index: 1200; }
+ [type="checkbox"].modal:checked + div .card .modal-close {
+ z-index: 1211; }
+
+:root {
+ --collapse-label-back-color: #03234b;
+ --collapse-label-fore-color: #ffffff;
+ --collapse-label-hover-back-color: #3cb4e6;
+ --collapse-selected-label-back-color: #3cb4e6;
+ --collapse-border-color: var(--collapse-label-back-color);
+ --collapse-selected-border-color: #ceecf8;
+ --collapse-content-back-color: #ffffff;
+ --collapse-selected-label-border-color: #3cb4e6; }
+
+.collapse {
+ width: calc(100% - 2 * var(--universal-margin));
+ opacity: 1;
+ display: flex;
+ flex-direction: column;
+ margin: var(--universal-margin);
+ border-radius: var(--universal-border-radius); }
+ .collapse > [type="radio"], .collapse > [type="checkbox"] {
+ height: 1px;
+ width: 1px;
+ margin: -1px;
+ overflow: hidden;
+ position: absolute;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%); }
+ .collapse > label {
+ flex-grow: 1;
+ display: inline-block;
+ height: 1.25rem;
+ cursor: pointer;
+ transition: background 0.2s;
+ color: var(--collapse-label-fore-color);
+ background: var(--collapse-label-back-color);
+ border: 0.0714285714rem solid var(--collapse-selected-border-color);
+ padding: calc(1.25 * var(--universal-padding)); }
+ .collapse > label:hover, .collapse > label:focus {
+ background: var(--collapse-label-hover-back-color); }
+ .collapse > label + div {
+ flex-basis: auto;
+ height: 1px;
+ width: 1px;
+ margin: -1px;
+ overflow: hidden;
+ position: absolute;
+ clip: rect(0 0 0 0);
+ -webkit-clip-path: inset(100%);
+ clip-path: inset(100%);
+ transition: max-height 0.3s;
+ max-height: 1px; }
+ .collapse > :checked + label {
+ background: var(--collapse-selected-label-back-color);
+ border-color: var(--collapse-selected-label-border-color); }
+ .collapse > :checked + label + div {
+ box-sizing: border-box;
+ position: relative;
+ width: 100%;
+ height: auto;
+ overflow: auto;
+ margin: 0;
+ background: var(--collapse-content-back-color);
+ border: 0.0714285714rem solid var(--collapse-selected-border-color);
+ border-top: 0;
+ padding: var(--universal-padding);
+ clip: auto;
+ -webkit-clip-path: inset(0%);
+ clip-path: inset(0%);
+ max-height: 100%; }
+ .collapse > label:not(:first-of-type) {
+ border-top: 0; }
+ .collapse > label:first-of-type {
+ border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; }
+ .collapse > label:last-of-type:not(:first-of-type) {
+ border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+ .collapse > label:last-of-type:first-of-type {
+ border-radius: var(--universal-border-radius); }
+ .collapse > :checked:last-of-type:not(:first-of-type) + label {
+ border-radius: 0; }
+ .collapse > :checked:last-of-type + label + div {
+ border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); }
+
+/*
+ Custom elements for contextual background elements, toasts and tooltips.
+*/
+mark.tertiary {
+ --mark-back-color: #3cb4e6; }
+
+mark.tag {
+ padding: calc(var(--universal-padding)/2) var(--universal-padding);
+ border-radius: 1em; }
+
+/*
+ Definitions for progress elements and spinners.
+*/
+/* Progress module CSS variable definitions */
+:root {
+ --progress-back-color: #3cb4e6;
+ --progress-fore-color: #555; }
+
+progress {
+ display: block;
+ vertical-align: baseline;
+ -webkit-appearance: none;
+ -moz-appearance: none;
+ appearance: none;
+ height: 0.75rem;
+ width: calc(100% - 2 * var(--universal-margin));
+ margin: var(--universal-margin);
+ border: 0;
+ border-radius: calc(2 * var(--universal-border-radius));
+ background: var(--progress-back-color);
+ color: var(--progress-fore-color); }
+ progress::-webkit-progress-value {
+ background: var(--progress-fore-color);
+ border-top-left-radius: calc(2 * var(--universal-border-radius));
+ border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+ progress::-webkit-progress-bar {
+ background: var(--progress-back-color); }
+ progress::-moz-progress-bar {
+ background: var(--progress-fore-color);
+ border-top-left-radius: calc(2 * var(--universal-border-radius));
+ border-bottom-left-radius: calc(2 * var(--universal-border-radius)); }
+ progress[value="1000"]::-webkit-progress-value {
+ border-radius: calc(2 * var(--universal-border-radius)); }
+ progress[value="1000"]::-moz-progress-bar {
+ border-radius: calc(2 * var(--universal-border-radius)); }
+ progress.inline {
+ display: inline-block;
+ vertical-align: middle;
+ width: 60%; }
+
+:root {
+ --spinner-back-color: #ddd;
+ --spinner-fore-color: #555; }
+
+@keyframes spinner-donut-anim {
+ 0% {
+ transform: rotate(0deg); }
+ 100% {
+ transform: rotate(360deg); } }
+.spinner {
+ display: inline-block;
+ margin: var(--universal-margin);
+ border: 0.25rem solid var(--spinner-back-color);
+ border-left: 0.25rem solid var(--spinner-fore-color);
+ border-radius: 50%;
+ width: 1.25rem;
+ height: 1.25rem;
+ animation: spinner-donut-anim 1.2s linear infinite; }
+
+/*
+ Custom elements for progress bars and spinners.
+*/
+progress.primary {
+ --progress-fore-color: #1976d2; }
+
+progress.secondary {
+ --progress-fore-color: #d32f2f; }
+
+progress.tertiary {
+ --progress-fore-color: #308732; }
+
+.spinner.primary {
+ --spinner-fore-color: #1976d2; }
+
+.spinner.secondary {
+ --spinner-fore-color: #d32f2f; }
+
+.spinner.tertiary {
+ --spinner-fore-color: #308732; }
+
+/*
+ Definitions for icons - powered by Feather (https://feathericons.com/).
+*/
+span[class^='icon-'] {
+ display: inline-block;
+ height: 1em;
+ width: 1em;
+ vertical-align: -0.125em;
+ background-size: contain;
+ margin: 0 calc(var(--universal-margin) / 4); }
+ span[class^='icon-'].secondary {
+ -webkit-filter: invert(25%);
+ filter: invert(25%); }
+ span[class^='icon-'].inverse {
+ -webkit-filter: invert(100%);
+ filter: invert(100%); }
+
+span.icon-alert {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-bookmark {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-calendar {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-credit {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-edit {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); }
+span.icon-link {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-help {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-home {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-info {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-lock {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-mail {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); }
+span.icon-location {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-phone {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-rss {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); }
+span.icon-search {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-settings {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-share {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-cart {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); }
+span.icon-upload {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); }
+span.icon-user {
+ background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); }
+
+/*
+ Definitions for STMicroelectronics icons (https://brandportal.st.com/document/26).
+*/
+span.icon-st-update {
+ background-image: url("Update.svg"); }
+span.icon-st-add {
+ background-image: url("Add button.svg"); }
+
+/*
+ Definitions for utilities and helper classes.
+*/
+/* Utility module CSS variable definitions */
+:root {
+ --generic-border-color: rgba(0, 0, 0, 0.3);
+ --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); }
+
+.hidden {
+ display: none !important; }
+
+.visually-hidden {
+ position: absolute !important;
+ width: 1px !important;
+ height: 1px !important;
+ margin: -1px !important;
+ border: 0 !important;
+ padding: 0 !important;
+ clip: rect(0 0 0 0) !important;
+ -webkit-clip-path: inset(100%) !important;
+ clip-path: inset(100%) !important;
+ overflow: hidden !important; }
+
+.bordered {
+ border: 0.0714285714rem solid var(--generic-border-color) !important; }
+
+.rounded {
+ border-radius: var(--universal-border-radius) !important; }
+
+.circular {
+ border-radius: 50% !important; }
+
+.shadowed {
+ box-shadow: var(--generic-box-shadow) !important; }
+
+.responsive-margin {
+ margin: calc(var(--universal-margin) / 4) !important; }
+ @media screen and (min-width: 500px) {
+ .responsive-margin {
+ margin: calc(var(--universal-margin) / 2) !important; } }
+ @media screen and (min-width: 1280px) {
+ .responsive-margin {
+ margin: var(--universal-margin) !important; } }
+
+.responsive-padding {
+ padding: calc(var(--universal-padding) / 4) !important; }
+ @media screen and (min-width: 500px) {
+ .responsive-padding {
+ padding: calc(var(--universal-padding) / 2) !important; } }
+ @media screen and (min-width: 1280px) {
+ .responsive-padding {
+ padding: var(--universal-padding) !important; } }
+
+@media screen and (max-width: 499px) {
+ .hidden-sm {
+ display: none !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+ .hidden-md {
+ display: none !important; } }
+@media screen and (min-width: 1280px) {
+ .hidden-lg {
+ display: none !important; } }
+@media screen and (max-width: 499px) {
+ .visually-hidden-sm {
+ position: absolute !important;
+ width: 1px !important;
+ height: 1px !important;
+ margin: -1px !important;
+ border: 0 !important;
+ padding: 0 !important;
+ clip: rect(0 0 0 0) !important;
+ -webkit-clip-path: inset(100%) !important;
+ clip-path: inset(100%) !important;
+ overflow: hidden !important; } }
+@media screen and (min-width: 500px) and (max-width: 1279px) {
+ .visually-hidden-md {
+ position: absolute !important;
+ width: 1px !important;
+ height: 1px !important;
+ margin: -1px !important;
+ border: 0 !important;
+ padding: 0 !important;
+ clip: rect(0 0 0 0) !important;
+ -webkit-clip-path: inset(100%) !important;
+ clip-path: inset(100%) !important;
+ overflow: hidden !important; } }
+@media screen and (min-width: 1280px) {
+ .visually-hidden-lg {
+ position: absolute !important;
+ width: 1px !important;
+ height: 1px !important;
+ margin: -1px !important;
+ border: 0 !important;
+ padding: 0 !important;
+ clip: rect(0 0 0 0) !important;
+ -webkit-clip-path: inset(100%) !important;
+ clip-path: inset(100%) !important;
+ overflow: hidden !important; } }
+
+/*# sourceMappingURL=mini-custom.css.map */
+
+img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; }
+img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;}
+
+.figure {
+ display: block;
+ margin-left: auto;
+ margin-right: auto;
+ text-align: center;
+}
\ No newline at end of file
diff --git a/_htmresc/st_logo_2020.png b/_htmresc/st_logo_2020.png
new file mode 100644
index 0000000..d6cebb5
--- /dev/null
+++ b/_htmresc/st_logo_2020.png
Binary files differ
