| /** |
| ****************************************************************************** |
| * @file stm32l5xx_ll_bus.h |
| * @author MCD Application Team |
| * @brief Header file of BUS LL module. |
| |
| @verbatim |
| ##### RCC Limitations ##### |
| ============================================================================== |
| [..] |
| A delay between an RCC peripheral clock enable and the effective peripheral |
| enabling should be taken into account in order to manage the peripheral read/write |
| from/to registers. |
| (+) This delay depends on the peripheral mapping. |
| (++) AHB & APB peripherals, 1 dummy read is necessary |
| |
| [..] |
| Workarounds: |
| (#) For AHB & APB peripherals, a dummy read to the peripheral register has been |
| inserted in each LL_{BUS}_GRP{x}_EnableClock() function. |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file in |
| * the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32L5xx_LL_BUS_H |
| #define STM32L5xx_LL_BUS_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l5xx.h" |
| |
| /** @addtogroup STM32L5xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(RCC) |
| |
| /** @defgroup BUS_LL BUS |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Constants BUS Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN |
| #define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN |
| #define LL_AHB1_GRP1_PERIPH_DMAMUX1 RCC_AHB1ENR_DMAMUX1EN |
| #define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN |
| #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN |
| #define LL_AHB1_GRP1_PERIPH_TSC RCC_AHB1ENR_TSCEN |
| #define LL_AHB1_GRP1_PERIPH_GTZC RCC_AHB1ENR_GTZCEN |
| #define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN |
| #define LL_AHB1_GRP1_PERIPH_ICACHE RCC_AHB1SMENR_ICACHESMEN |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN |
| #define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN |
| #define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN |
| #if defined(AES) |
| #define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN |
| #endif /* AES */ |
| #if defined(HASH) |
| #define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN |
| #endif /* HASH */ |
| #define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN |
| #define LL_AHB2_GRP1_PERIPH_PKA RCC_AHB2ENR_PKAEN |
| #define LL_AHB2_GRP1_PERIPH_OTFDEC1 RCC_AHB2ENR_OTFDEC1EN |
| #define LL_AHB2_GRP1_PERIPH_SDMMC1 RCC_AHB2ENR_SDMMC1EN |
| #define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN |
| #define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN |
| #define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN |
| #define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN |
| #define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN |
| #define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN |
| #define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN |
| #define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN |
| #define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN |
| #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN |
| #define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN |
| #define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN |
| #define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN |
| #define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN |
| #define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN |
| #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN |
| #define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN |
| #define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN |
| #define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN |
| #define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN |
| #define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR1_DAC1EN |
| #define LL_APB1_GRP1_PERIPH_OPAMP RCC_APB1ENR1_OPAMPEN |
| #define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP2_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN |
| #define LL_APB1_GRP2_PERIPH_I2C4 RCC_APB1ENR2_I2C4EN |
| #define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN |
| #define LL_APB1_GRP2_PERIPH_LPTIM3 RCC_APB1ENR2_LPTIM3EN |
| #define LL_APB1_GRP2_PERIPH_FDCAN1 RCC_APB1ENR2_FDCAN1EN |
| #define LL_APB1_GRP2_PERIPH_USB RCC_APB1ENR2_USBFSEN |
| #define LL_APB1_GRP2_PERIPH_UCPD1 RCC_APB1ENR2_UCPD1EN |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN |
| #define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN |
| #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN |
| #define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN |
| #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN |
| #define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN |
| #define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN |
| #define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN |
| #define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN |
| #define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN |
| #define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Functions BUS Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock\n |
| * AHB1ENR GTZCEN LL_AHB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GTZC |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB1 peripheral clock is enabled or not |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHB1ENR GTZCEN LL_AHB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GTZC |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock. |
| * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR DMAMUX1EN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock\n |
| * AHB1ENR GTZCEN LL_AHB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GTZC |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB1 peripherals reset. |
| * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n |
| * AHB1RSTR TSCRST LL_AHB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB1 peripherals reset. |
| * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR DMAMUX1RST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHB1RSTR TSCRST LL_AHB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR GTZCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n |
| * AHB1SMENR ICACHESMEN LL_AHB1_GRP1_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GTZC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ICACHE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB1SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR DMAMUX1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR GTZCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n |
| * AHB1SMENR ICACHESMEN LL_AHB1_GRP1_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMAMUX1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_GTZC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ICACHE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB1SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB2 AHB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB2 peripherals clock. |
| * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR GPIOHEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR ADCEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR PKAEN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR OTFDEC1EN LL_AHB2_GRP1_EnableClock\n |
| * AHB2ENR SDMMC1EN LL_AHB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB2 peripheral clock is enabled or not |
| * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR GPIOHEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR ADCEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR PKAEN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR OTFDEC1EN LL_AHB2_GRP1_IsEnabledClock\n |
| * AHB2ENR SDMMC1EN LL_AHB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable AHB2 peripherals clock. |
| * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR GPIOHEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR ADCEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR PKAEN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR OTFDEC1EN LL_AHB2_GRP1_DisableClock\n |
| * AHB2ENR SDMMC1EN LL_AHB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB2 peripherals reset. |
| * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR ADCRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR PKARST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR OTFDEC1RST LL_AHB2_GRP1_ForceReset\n |
| * AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB2 peripherals reset. |
| * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR ADCRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR PKARST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR OTFDEC1RST LL_AHB2_GRP1_ReleaseReset\n |
| * AHB2RSTR SDMMC1RST LL_AHB2_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB2 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR ADCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR HASHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR PKASMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR OTFDEC1SMEN LL_AHB2_GRP1_EnableClockStopSleep\n |
| * AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB2SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB2 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR ADCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR HASHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR PKASMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR OTFDEC1SMEN LL_AHB2_GRP1_DisableClockStopSleep\n |
| * AHB2SMENR SDMMC1SMEN LL_AHB2_GRP1_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2 |
| * @arg @ref LL_AHB2_GRP1_PERIPH_ADC |
| * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_RNG |
| * @arg @ref LL_AHB2_GRP1_PERIPH_PKA (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_OTFDEC1 (*) |
| * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB2SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB3 AHB3 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB3 peripherals clock. |
| * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB3ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB3 peripheral clock is enabled or not |
| * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable AHB3 peripherals clock. |
| * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n |
| * AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB3 peripherals reset. |
| * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n |
| * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB3 peripherals reset. |
| * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n |
| * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB3 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n |
| * AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHB3SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB3 peripheral clocks in Sleep and Stop modes |
| * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n |
| * AHB3SMENR OSPI1SMEN LL_AHB3_GRP1_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB3_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB3_GRP1_PERIPH_FMC |
| * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHB3SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 DAC1EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 OPAMPEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1ENR1, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1ENR1, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 I2C4EN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 LPTIM3EN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 FDCAN1EN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 USBFSEN LL_APB1_GRP2_EnableClock\n |
| * APB1ENR2 UCPD1EN LL_APB1_GRP2_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1ENR2, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1ENR2, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 OPAMPEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1ENR1, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 I2C4EN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 LPTIM3EN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 FDCAN1EN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 USBFSEN LL_APB1_GRP2_IsEnabledClock\n |
| * APB1ENR2 UCPD1EN LL_APB1_GRP2_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1ENR2, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 DAC1EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 OPAMPEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1ENR1, Periphs); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 I2C4EN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 LPTIM3EN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 FDCAN1EN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 USBFSEN LL_APB1_GRP2_DisableClock\n |
| * APB1ENR2 UCPD1EN LL_APB1_GRP2_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1ENR2, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1RSTR1, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 I2C4RST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 LPTIM3RST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 FDCAN1RST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 USBFSRST LL_APB1_GRP2_ForceReset\n |
| * APB1RSTR2 UCPD1RST LL_APB1_GRP2_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1RSTR2, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1RSTR1, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 I2C4RST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 LPTIM3RST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 FDCAN1RST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 USBFSRST LL_APB1_GRP2_ReleaseReset\n |
| * APB1RSTR2 UCPD1RST LL_APB1_GRP2_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1RSTR2, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_EnableClockStopSleep\n |
| * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1SMENR1, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Enable APB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 I2C4SMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 LPTIM3SMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 FDCAN1SMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 USBFSSMEN LL_APB1_GRP2_EnableClockStopSleep\n |
| * APB1SMENR2 UCPD1SMEN LL_APB1_GRP2_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1SMENR2, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_DisableClockStopSleep\n |
| * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 |
| * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART4 |
| * @arg @ref LL_APB1_GRP1_PERIPH_UART5 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1SMENR1, Periphs); |
| } |
| |
| /** |
| * @brief Disable APB1 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 I2C4SMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 LPTIM3SMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 FDCAN1SMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 USBFSSMEN LL_APB1_GRP2_DisableClockStopSleep\n |
| * APB1SMENR2 UCPD1SMEN LL_APB1_GRP2_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP2_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_I2C4 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2 |
| * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM3 |
| * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN1 |
| * @arg @ref LL_APB1_GRP2_PERIPH_USB |
| * @arg @ref LL_APB1_GRP2_PERIPH_UCPD1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1SMENR2, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB2 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR SAI2SMEN LL_APB2_GRP1_EnableClockStopSleep\n |
| * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_EnableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB2 peripheral clocks in Sleep and Stop modes |
| * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR SAI2SMEN LL_APB2_GRP1_DisableClockStopSleep\n |
| * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_DisableClockStopSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 |
| * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(RCC) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32L5xx_LL_BUS_H */ |
| |
