| /** |
| ****************************************************************************** |
| * @file stm32wbxx_hal_rtc_ex.h |
| * @author MCD Application Team |
| * @brief Header file of RTC HAL Extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32WBxx_HAL_RTC_EX_H |
| #define STM32WBxx_HAL_RTC_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32wbxx_hal_def.h" |
| |
| /** @addtogroup STM32WBxx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx RTCEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| |
| /** @defgroup RTCEx_Exported_Types RTCEx Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief RTC Tamper structure definition |
| */ |
| typedef struct |
| { |
| uint32_t Tamper; /*!< Specifies the Tamper Pin. |
| This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ |
| |
| uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. |
| This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ |
| |
| uint32_t Trigger; /*!< Specifies the Tamper Trigger. |
| This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ |
| |
| uint32_t NoErase; /*!< Specifies the Tamper no erase mode. |
| This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ |
| |
| uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. |
| This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ |
| |
| uint32_t Filter; /*!< Specifies the RTC Filter Tamper. |
| This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ |
| |
| uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. |
| This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ |
| |
| uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . |
| This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ |
| |
| uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . |
| This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ |
| |
| uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. |
| This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ |
| } RTC_TamperTypeDef; |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition |
| * @{ |
| */ |
| #define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000U) |
| #define RTC_OUTPUT_ALARMA ((uint32_t)RTC_CR_OSEL_0) |
| #define RTC_OUTPUT_ALARMB ((uint32_t)RTC_CR_OSEL_1) |
| #define RTC_OUTPUT_WAKEUP ((uint32_t)RTC_CR_OSEL) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition |
| * @{ |
| */ |
| #define RTC_BKP_DR0 ((uint32_t)0x00000000U) |
| #define RTC_BKP_DR1 ((uint32_t)0x00000001U) |
| #define RTC_BKP_DR2 ((uint32_t)0x00000002U) |
| #define RTC_BKP_DR3 ((uint32_t)0x00000003U) |
| #define RTC_BKP_DR4 ((uint32_t)0x00000004U) |
| #define RTC_BKP_DR5 ((uint32_t)0x00000005U) |
| #define RTC_BKP_DR6 ((uint32_t)0x00000006U) |
| #define RTC_BKP_DR7 ((uint32_t)0x00000007U) |
| #define RTC_BKP_DR8 ((uint32_t)0x00000008U) |
| #define RTC_BKP_DR9 ((uint32_t)0x00000009U) |
| #define RTC_BKP_DR10 ((uint32_t)0x0000000AU) |
| #define RTC_BKP_DR11 ((uint32_t)0x0000000BU) |
| #define RTC_BKP_DR12 ((uint32_t)0x0000000CU) |
| #define RTC_BKP_DR13 ((uint32_t)0x0000000DU) |
| #define RTC_BKP_DR14 ((uint32_t)0x0000000EU) |
| #define RTC_BKP_DR15 ((uint32_t)0x0000000FU) |
| #define RTC_BKP_DR16 ((uint32_t)0x00000010U) |
| #define RTC_BKP_DR17 ((uint32_t)0x00000011U) |
| #define RTC_BKP_DR18 ((uint32_t)0x00000012U) |
| #define RTC_BKP_DR19 ((uint32_t)0x00000013U) |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition |
| * @{ |
| */ |
| #define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U) |
| #define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection |
| * @{ |
| */ |
| #define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U) |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition |
| * @{ |
| */ |
| #if defined(RTC_TAMPER1_SUPPORT) |
| #define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| |
| #define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E |
| |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions |
| * @{ |
| */ |
| #if defined(RTC_TAMPER1_SUPPORT) |
| #define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| |
| |
| #define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE |
| |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| #define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions |
| * @{ |
| */ |
| #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U) |
| #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U) |
| #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE |
| #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions |
| * @{ |
| */ |
| #define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000U) |
| #define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions |
| * @{ |
| */ |
| #define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000U) |
| #define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000U) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions |
| * @{ |
| */ |
| #define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */ |
| |
| #define RTC_TAMPERFILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4 |
| consecutive samples at the active level */ |
| #define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8 |
| consecutive samples at the active leve. */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions |
| * @{ |
| */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 32768 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 16384 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 8192 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1)) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 4096 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 2048 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 1024 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 512 */ |
| #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1 | \ |
| RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled |
| with a frequency = RTCCLK / 256 */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions |
| * @{ |
| */ |
| #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before |
| sampling during 1 RTCCLK cycle */ |
| #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before |
| sampling during 2 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before |
| sampling during 4 RTCCLK cycles */ |
| #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)(RTC_TAMPCR_TAMPPRCH_0 | RTC_TAMPCR_TAMPPRCH_1)) /*!< Tamper pins are pre-charged before |
| sampling during 8 RTCCLK cycles */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions |
| * @{ |
| */ |
| #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ |
| #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions |
| * @{ |
| */ |
| #define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before sampling */ |
| #define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions |
| * @{ |
| */ |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U) |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 |
| #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t) (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1)) |
| #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 |
| #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t) (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions |
| * @{ |
| */ |
| #define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibation |
| period is 32s, else 2exp20 RTCCLK pulses */ |
| #define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation |
| period is 16s, else 2exp19 RTCCLK pulses */ |
| #define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation |
| period is 8s, else 2exp18 RTCCLK pulses */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions |
| * @{ |
| */ |
| #define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added |
| during a X -second window = Y - CALM[8:0] |
| with Y = 512, 256, 128 when X = 32, 16, 8 */ |
| #define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited |
| during a 32-second window = CALM[8:0] */ |
| |
| /** |
| * @} |
| */ |
| /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions |
| * @{ |
| */ |
| #define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U) |
| #define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions |
| * @{ |
| */ |
| #define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U) |
| #define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S |
| /** |
| * @} |
| */ |
| /** @defgroup RTCEx_Interrupts_Definitions RTCEx Interrupts Definitions |
| * @{ |
| */ |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_IT_TAMP3 ((uint32_t)RTC_TAMPCR_TAMP3IE) /*!< Enable Tamper 3 Interrupt */ |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTCEx_Flags_Definitions RTCEx Flags Definitions |
| * @{ |
| */ |
| #if defined(RTC_TAMPER3_SUPPORT) |
| #define RTC_FLAG_TAMP3F ((uint32_t)RTC_ISR_TAMP3F) |
| #endif |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros |
| * @{ |
| */ |
| |
| /* ---------------------------------WAKEUPTIMER---------------------------------*/ |
| /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer |
| * @{ |
| */ |
| /** |
| * @brief Enable the RTC WakeUp Timer peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) |
| |
| /** |
| * @brief Disable the RTC WakeUp Timer peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) |
| |
| /** |
| * @brief Enable the RTC WakeUpTimer interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. |
| * This parameter can be: |
| * @arg RTC_IT_WUT: WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC WakeUpTimer interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. |
| * This parameter can be: |
| * @arg RTC_IT_WUT: WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. |
| * This parameter can be: |
| * @arg RTC_IT_WUT: WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)\ |
| & ((__INTERRUPT__)>> 4U)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. |
| * This parameter can be: |
| * @arg RTC_IT_WUT: WakeUpTimer interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR)\ |
| & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Get the selected RTC WakeUpTimer's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_WUTF |
| * @arg RTC_FLAG_WUTWF |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR)\ |
| & (__FLAG__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Clear the RTC Wake Up timer's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. |
| * This parameter can be: |
| * @arg RTC_FLAG_WUTF |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__)\ |
| | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| |
| /** |
| * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line of core 1. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line of core 1. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| |
| /** |
| * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line of core 2. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_ENABLE_IT() (EXTI->C2IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line of core 2. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_DISABLE_IT() (EXTI->C2IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| |
| /** |
| * @brief Enable event on the RTC WakeUp Timer associated Exti line of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Enable event on the RTC WakeUp Timer associated Exti line of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_ENABLE_EVENT() (EXTI->C2EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| |
| /** |
| * @brief Disable event on the RTC WakeUp Timer associated Exti line of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Disable event on the RTC WakeUp Timer associated Exti line of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_DISABLE_EVENT() (EXTI->C2EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| |
| /*---------------*/ |
| /** |
| * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| /** |
| * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) |
| |
| |
| /** |
| * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. |
| * This parameter can be: |
| * @retval None |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not of core 1. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not of core 2. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| |
| |
| /** |
| * @brief Clear the RTC WakeUp Timer associated Exti line flag of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| /** |
| * @brief Clear the RTC WakeUp Timer associated Exti line flag of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTIC2_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| |
| |
| /*---------------*/ |
| /** |
| * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) |
| /*---------------*/ |
| |
| /** |
| * @} |
| */ |
| |
| /* ---------------------------------TIMESTAMP---------------------------------*/ |
| /** @defgroup RTCEx_Timestamp RTC Timestamp |
| * @{ |
| */ |
| /** |
| * @brief Enable the RTC TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) |
| |
| /** |
| * @brief Disable the RTC TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) |
| |
| /** |
| * @brief Enable the RTC TimeStamp interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. |
| * This parameter can be: |
| * @arg RTC_IT_TS: TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC TimeStamp interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. |
| * This parameter can be: |
| * @arg RTC_IT_TS: TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. |
| * This parameter can be: |
| * @arg RTC_IT_TS: TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)\ |
| & ((__INTERRUPT__)>> 4U)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. |
| * This parameter can be: |
| * @arg RTC_IT_TS: TimeStamp interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR)\ |
| & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Get the selected RTC TimeStamp's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_TSF |
| * @arg RTC_FLAG_TSOVF |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR)\ |
| & (__FLAG__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Clear the RTC Time Stamp's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. |
| * This parameter can be: |
| * @arg RTC_FLAG_TSF |
| * @arg RTC_FLAG_TSOVF |
| * @retval None |
| */ |
| #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__)\ |
| | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* ---------------------------------TAMPER------------------------------------*/ |
| /** @defgroup RTCEx_Tamper RTC Tamper |
| * @{ |
| */ |
| |
| #if defined(RTC_TAMPER1_SUPPORT) |
| /** |
| * @brief Enable the RTC Tamper1 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| |= (RTC_TAMPCR_TAMP1E)) |
| |
| /** |
| * @brief Disable the RTC Tamper1 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| &= ~(RTC_TAMPCR_TAMP1E)) |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| |
| /** |
| * @brief Enable the RTC Tamper2 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| |= (RTC_TAMPCR_TAMP2E)) |
| |
| /** |
| * @brief Disable the RTC Tamper2 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| &= ~(RTC_TAMPCR_TAMP2E)) |
| |
| #if defined(RTC_TAMPER3_SUPPORT) |
| /** |
| * @brief Enable the RTC Tamper3 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| |= (RTC_TAMPCR_TAMP3E)) |
| |
| /** |
| * @brief Disable the RTC Tamper3 input detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR\ |
| &= ~(RTC_TAMPCR_TAMP3E)) |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| |
| |
| /**************************************************************************************************/ |
| |
| /** |
| * @brief Enable the RTC Tamper interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_TAMP: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC Tamper interrupt. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_TAMP: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR\ |
| &= ~(__INTERRUPT__)) |
| |
| /**************************************************************************************************/ |
| |
| /** |
| * @brief Check whether the specified RTC Tamper interrupt has occurred or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. |
| * This parameter can be: |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) |
| #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != 0U) ? 1U : 0U) : \ |
| ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != 0U) ? 1U : 0U) : \ |
| ((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7U)) != 0U) ? 1U : 0U)) |
| #else |
| #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__)\ |
| == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != 0U) ? 1U : 0U)) |
| #endif |
| |
| /**************************************************************************************************/ |
| |
| /** |
| * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. |
| * This parameter can be: |
| * @arg RTC_IT_TAMP: All tampers interrupts |
| * @arg RTC_IT_TAMP1: Tamper1 interrupt (*) |
| * @arg RTC_IT_TAMP2: Tamper2 interrupt |
| * @arg RTC_IT_TAMP3: Tamper3 interrupt (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR)\ |
| & (__INTERRUPT__)) != 0U) ? 1U : 0U) |
| |
| |
| /** |
| * @brief Get the selected RTC Tamper's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_TAMP1F: Tamper1 flag (*) |
| * @arg RTC_FLAG_TAMP2F: Tamper2 flag |
| * @arg RTC_FLAG_TAMP3F: Tamper3 flag (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR)\ |
| & (__FLAG__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Clear the RTC Tamper's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Tamper Flag to clear. |
| * This parameter can be: |
| * @arg RTC_FLAG_TAMP1F: Tamper1 flag (*) |
| * @arg RTC_FLAG_TAMP2F: Tamper2 flag |
| * @arg RTC_FLAG_TAMP3F: Tamper3 flag (*) |
| * |
| * (*) Value not defined in all devices. \n |
| * |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__)\ |
| | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| |
| |
| /**************************************************************************************************/ |
| |
| |
| #if defined(RTC_INTERNALTS_SUPPORT) |
| /** |
| * @brief Enable the RTC internal TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) |
| |
| /** |
| * @brief Disable the RTC internal TimeStamp peripheral. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) |
| |
| /** |
| * @brief Get the selected RTC Internal Time Stamp's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_ITSF |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR)\ |
| & (__FLAG__)) != 0U) ? 1U : 0U) |
| |
| /** |
| * @brief Clear the RTC Internal Time Stamp's pending flags. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. |
| * This parameter can be: |
| * @arg RTC_FLAG_ITSF |
| * @retval None |
| */ |
| #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__)\ |
| | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) |
| #endif |
| /**************************************************************************************************/ |
| |
| /** |
| * @} |
| */ |
| |
| /* --------------------------TAMPER/TIMESTAMP---------------------------------*/ |
| /** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI |
| * @{ |
| */ |
| |
| /* TAMPER TIMESTAMP EXTI */ |
| /* --------------------- */ |
| |
| /** |
| * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line of core 1. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line of core 2. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_ENABLE_IT() (EXTI->C2IMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line of core 1. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line of core 2. |
| * @retval None |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_DISABLE_IT() (EXTI->C2IMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable event on the RTC Tamper and Timestamp associated Exti line of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Enable event on the RTC Tamper and Timestamp associated Exti line of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_ENABLE_EVENT() (EXTI->C2EMR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable event on the RTC Tamper and Timestamp associated Exti line of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Disable event on the RTC Tamper and Timestamp associated Exti line of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_DISABLE_EVENT() (EXTI->C2EMR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /*-----------------*/ |
| /** |
| * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| /** |
| * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR1 &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) |
| |
| |
| /** |
| * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. |
| * This parameter can be: |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not of core 1. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not of core 2. |
| * @retval Line Status. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_GET_FLAG() (EXTI->PR1 & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Clear the RTC Tamper and Timestamp associated Exti line flag of core 1. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Clear the RTC Tamper and Timestamp associated Exti line flag of core 2. |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTIC2_CLEAR_FLAG() (EXTI->PR1 = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| /** |
| * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line |
| * @retval None. |
| */ |
| #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* ------------------------------Calibration----------------------------------*/ |
| /** @defgroup RTCEx_Calibration RTC Calibration |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable the RTC calibration output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) |
| |
| /** |
| * @brief Disable the calibration output. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) |
| |
| |
| /** |
| * @brief Enable the clock reference detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) |
| |
| /** |
| * @brief Disable the clock reference detection. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) |
| |
| |
| /** |
| * @brief Get the selected RTC shift operation's flag status. |
| * @param __HANDLE__ specifies the RTC handle. |
| * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. |
| * This parameter can be: |
| * @arg RTC_FLAG_SHPF |
| * @retval None |
| */ |
| #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR)\ |
| & (__FLAG__)) != 0U)? 1U : 0U) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions |
| * @{ |
| */ |
| |
| /* RTC TimeStamp and Tamper functions *****************************************/ |
| /** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions |
| * @{ |
| */ |
| |
| HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); |
| HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); |
| #if defined(RTC_INTERNALTS_SUPPORT) |
| HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); |
| #endif |
| HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, |
| RTC_DateTypeDef *sTimeStampDate, uint32_t Format); |
| |
| HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); |
| HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); |
| void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); |
| |
| #if defined(RTC_TAMPER1_SUPPORT) |
| void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); |
| #if defined(RTC_TAMPER3_SUPPORT) |
| void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #if defined(RTC_TAMPER1_SUPPORT) |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #endif /* RTC_TAMPER1_SUPPORT */ |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #if defined(RTC_TAMPER3_SUPPORT) |
| HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| #endif /* RTC_TAMPER3_SUPPORT */ |
| /** |
| * @} |
| */ |
| |
| /* RTC Wake-up functions ******************************************************/ |
| /** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions |
| * @{ |
| */ |
| |
| HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); |
| HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); |
| uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); |
| void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); |
| void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /* Extended Control functions ************************************************/ |
| /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions |
| * @{ |
| */ |
| |
| void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); |
| uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); |
| |
| HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, |
| uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); |
| HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); |
| HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); |
| /** |
| * @} |
| */ |
| |
| /* Extended RTC features functions *******************************************/ |
| /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions |
| * @{ |
| */ |
| void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup RTCEx_Private_Constants RTCEx Private Constants |
| * @{ |
| */ |
| |
| /* Masks Definition */ |
| |
| #if defined(RTC_TAMPER1_SUPPORT) && defined(RTC_TAMPER3_SUPPORT) |
| |
| #define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \ |
| RTC_FLAG_TAMP1F| RTC_FLAG_TSOVF | RTC_FLAG_TSF | \ |
| RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \ |
| RTC_FLAG_INITF | RTC_FLAG_RSF | \ |
| RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \ |
| RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF)) |
| |
| #define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E)) |
| #define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \ |
| RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT)) |
| |
| #else |
| |
| #define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | \ |
| RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \ |
| RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \ |
| RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \ |
| RTC_FLAG_SHPF | RTC_FLAG_WUTWF |RTC_FLAG_ALRBWF | \ |
| RTC_FLAG_ALRAWF)) |
| |
| #define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E)) |
| #define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER2_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT)) |
| |
| #endif |
| |
| #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT (EXTI_IMR1_IM18) /*!< External interrupt line 18 Connected to the RTC Tamper and Time Stamp events */ |
| #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT (EXTI_IMR1_IM19) /*!< External interrupt line 19 Connected to the RTC Wakeup event */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup RTCEx_Private_Macros RTCEx Private Macros |
| * @{ |
| */ |
| |
| /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters |
| * @{ |
| */ |
| |
| #define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ |
| ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ |
| ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ |
| ((OUTPUT) == RTC_OUTPUT_WAKEUP)) |
| |
| #define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) |
| |
| #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ |
| ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) |
| |
| #define IS_RTC_TAMPER(TAMPER) ((((TAMPER)\ |
| & ((uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXE))) == 0x00U) && ((TAMPER) != 0U)) |
| |
| #define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT)\ |
| & (uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXIE)) == 0x00U) && ((INTERRUPT) != 0U)) |
| |
| #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) |
| |
| #define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ |
| ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ |
| ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ |
| ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) |
| |
| #define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ |
| ((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) |
| |
| #define IS_RTC_TAMPER_MASKFLAG_STATE(STATE) (((STATE) == RTC_TAMPERMASK_FLAG_ENABLE) || \ |
| ((STATE) == RTC_TAMPERMASK_FLAG_DISABLE)) |
| |
| #define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ |
| ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ |
| ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ |
| ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) |
| |
| #define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ |
| ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) |
| |
| #define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ |
| ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ |
| ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ |
| ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) |
| |
| #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ |
| ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) |
| |
| #define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ |
| ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) |
| |
| #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ |
| ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) |
| |
| #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) |
| |
| #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ |
| ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ |
| ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) |
| |
| #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ |
| ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) |
| |
| |
| /** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions |
| * @{ |
| */ |
| #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) |
| /** |
| * @} |
| */ |
| |
| |
| #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ |
| ((SEL) == RTC_SHIFTADD1S_SET)) |
| |
| |
| |
| /** @defgroup RTCEx_Subtract_Fraction_Of_Second_Value RTCEx Subtract Fraction Of Second Value |
| * @{ |
| */ |
| #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) |
| /** |
| * @} |
| */ |
| #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ |
| ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32WBxx_HAL_RTC_EX_H */ |