| // Copyright 2022 The Abseil Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // https://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| // ----------------------------------------------------------------------------- |
| // File: log/log.h |
| // ----------------------------------------------------------------------------- |
| // |
| // This header declares a family of LOG macros. |
| // |
| // Basic invocation looks like this: |
| // |
| // LOG(INFO) << "Found " << num_cookies << " cookies"; |
| // |
| // Most `LOG` macros take a severity level argument. The severity levels are |
| // `INFO`, `WARNING`, `ERROR`, and `FATAL`. They are defined |
| // in absl/base/log_severity.h. |
| // * The `FATAL` severity level terminates the program with a stack trace after |
| // logging its message. Error handlers registered with `RunOnFailure` |
| // (process_state.h) are run, but exit handlers registered with `atexit(3)` |
| // are not. |
| // * The `QFATAL` pseudo-severity level is equivalent to `FATAL` but triggers |
| // quieter termination messages, e.g. without a full stack trace, and skips |
| // running registered error handlers. |
| // * The `DFATAL` pseudo-severity level is defined as `FATAL` in debug mode and |
| // as `ERROR` otherwise. |
| // Some preprocessor shenanigans are used to ensure that e.g. `LOG(INFO)` has |
| // the same meaning even if a local symbol or preprocessor macro named `INFO` is |
| // defined. To specify a severity level using an expression instead of a |
| // literal, use `LEVEL(expr)`. |
| // Example: |
| // |
| // LOG(LEVEL(stale ? absl::LogSeverity::kWarning : absl::LogSeverity::kInfo)) |
| // << "Cookies are " << days << " days old"; |
| |
| // `LOG` macros evaluate to an unterminated statement. The value at the end of |
| // the statement supports some chainable methods: |
| // |
| // * .AtLocation(absl::string_view file, int line) |
| // .AtLocation(absl::SourceLocation loc) |
| // Overrides the location inferred from the callsite. The string pointed to |
| // by `file` must be valid until the end of the statement. |
| // * .NoPrefix() |
| // Omits the prefix from this line. The prefix includes metadata about the |
| // logged data such as source code location and timestamp. |
| // * .WithVerbosity(int verbose_level) |
| // Sets the verbosity field of the logged message as if it was logged by |
| // `VLOG(verbose_level)`. Unlike `VLOG`, this method does not affect |
| // evaluation of the statement when the specified `verbose_level` has been |
| // disabled. The only effect is on `LogSink` implementations which make use |
| // of the `absl::LogSink::verbosity()` value. The value |
| // `absl::LogEntry::kNoVerbosityLevel` can be specified to mark the message |
| // not verbose. |
| // * .WithTimestamp(absl::Time timestamp) |
| // Uses the specified timestamp instead of one collected at the time of |
| // execution. |
| // * .WithThreadID(absl::LogEntry::tid_t tid) |
| // Uses the specified thread ID instead of one collected at the time of |
| // execution. |
| // * .WithMetadataFrom(const absl::LogEntry &entry) |
| // Copies all metadata (but no data) from the specified `absl::LogEntry`. |
| // This can be used to change the severity of a message, but it has some |
| // limitations: |
| // * `ABSL_MIN_LOG_LEVEL` is evaluated against the severity passed into |
| // `LOG` (or the implicit `FATAL` level of `CHECK`). |
| // * `LOG(FATAL)` and `CHECK` terminate the process unconditionally, even if |
| // the severity is changed later. |
| // `.WithMetadataFrom(entry)` should almost always be used in combination |
| // with `LOG(LEVEL(entry.log_severity()))`. |
| // * .WithPerror() |
| // Appends to the logged message a colon, a space, a textual description of |
| // the current value of `errno` (as by `strerror(3)`), and the numerical |
| // value of `errno`. |
| // * .ToSinkAlso(absl::LogSink* sink) |
| // Sends this message to `*sink` in addition to whatever other sinks it |
| // would otherwise have been sent to. `sink` must not be null. |
| // * .ToSinkOnly(absl::LogSink* sink) |
| // Sends this message to `*sink` and no others. `sink` must not be null. |
| // |
| // No interfaces in this header are async-signal-safe; their use in signal |
| // handlers is unsupported and may deadlock your program or eat your lunch. |
| // |
| // Many logging statements are inherently conditional. For example, |
| // `LOG_IF(INFO, !foo)` does nothing if `foo` is true. Even seemingly |
| // unconditional statements like `LOG(INFO)` might be disabled at |
| // compile-time to minimize binary size or for security reasons. |
| // |
| // * Except for the condition in a `CHECK` or `QCHECK` statement, programs must |
| // not rely on evaluation of expressions anywhere in logging statements for |
| // correctness. For example, this is ok: |
| // |
| // CHECK((fp = fopen("config.ini", "r")) != nullptr); |
| // |
| // But this is probably not ok: |
| // |
| // LOG(INFO) << "Server status: " << StartServerAndReturnStatusString(); |
| // |
| // The example below is bad too; the `i++` in the `LOG_IF` condition might |
| // not be evaluated, resulting in an infinite loop: |
| // |
| // for (int i = 0; i < 1000000;) |
| // LOG_IF(INFO, i++ % 1000 == 0) << "Still working..."; |
| // |
| // * Except where otherwise noted, conditions which cause a statement not to log |
| // also cause expressions not to be evaluated. Programs may rely on this for |
| // performance reasons, e.g. by streaming the result of an expensive function |
| // call into a `DLOG` or `LOG_EVERY_N` statement. |
| // * Care has been taken to ensure that expressions are parsed by the compiler |
| // even if they are never evaluated. This means that syntax errors will be |
| // caught and variables will be considered used for the purposes of |
| // unused-variable diagnostics. For example, this statement won't compile |
| // even if `INFO`-level logging has been compiled out: |
| // |
| // int number_of_cakes = 40; |
| // LOG(INFO) << "Number of cakes: " << number_of_cake; // Note the typo! |
| // |
| // Similarly, this won't produce unused-variable compiler diagnostics even |
| // if `INFO`-level logging is compiled out: |
| // |
| // { |
| // char fox_line1[] = "Hatee-hatee-hatee-ho!"; |
| // LOG_IF(ERROR, false) << "The fox says " << fox_line1; |
| // char fox_line2[] = "A-oo-oo-oo-ooo!"; |
| // LOG(INFO) << "The fox also says " << fox_line2; |
| // } |
| // |
| // This error-checking is not perfect; for example, symbols that have been |
| // declared but not defined may not produce link errors if used in logging |
| // statements that compile away. |
| // |
| // Expressions streamed into these macros are formatted using `operator<<` just |
| // as they would be if streamed into a `std::ostream`, however it should be |
| // noted that their actual type is unspecified. |
| // |
| // To implement a custom formatting operator for a type you own, there are two |
| // options: `AbslStringify()` or `std::ostream& operator<<(std::ostream&, ...)`. |
| // It is recommended that users make their types loggable through |
| // `AbslStringify()` as it is a universal stringification extension that also |
| // enables `absl::StrFormat` and `absl::StrCat` support. If both |
| // `AbslStringify()` and `std::ostream& operator<<(std::ostream&, ...)` are |
| // defined, `AbslStringify()` will be used. |
| // |
| // To use the `AbslStringify()` API, define a friend function template in your |
| // type's namespace with the following signature: |
| // |
| // template <typename Sink> |
| // void AbslStringify(Sink& sink, const UserDefinedType& value); |
| // |
| // `Sink` has the same interface as `absl::FormatSink`, but without |
| // `PutPaddedString()`. |
| // |
| // Example: |
| // |
| // struct Point { |
| // template <typename Sink> |
| // friend void AbslStringify(Sink& sink, const Point& p) { |
| // absl::Format(&sink, "(%v, %v)", p.x, p.y); |
| // } |
| // |
| // int x; |
| // int y; |
| // }; |
| // |
| // To use `std::ostream& operator<<(std::ostream&, ...)`, define |
| // `std::ostream& operator<<(std::ostream&, ...)` in your type's namespace (for |
| // ADL) just as you would to stream it to `std::cout`. |
| // |
| // Currently `AbslStringify()` ignores output manipulators but this is not |
| // guaranteed behavior and may be subject to change in the future. If you would |
| // like guaranteed behavior regarding output manipulators, please use |
| // `std::ostream& operator<<(std::ostream&, ...)` to make custom types loggable |
| // instead. |
| // |
| // Those macros that support streaming honor output manipulators and `fmtflag` |
| // changes that output data (e.g. `std::ends`) or control formatting of data |
| // (e.g. `std::hex` and `std::fixed`), however flushing such a stream is |
| // ignored. The message produced by a log statement is sent to registered |
| // `absl::LogSink` instances at the end of the statement; those sinks are |
| // responsible for their own flushing (e.g. to disk) semantics. |
| // |
| // Flag settings are not carried over from one `LOG` statement to the next; this |
| // is a bit different than e.g. `std::cout`: |
| // |
| // LOG(INFO) << std::hex << 0xdeadbeef; // logs "0xdeadbeef" |
| // LOG(INFO) << 0xdeadbeef; // logs "3735928559" |
| |
| #ifndef ABSL_LOG_LOG_H_ |
| #define ABSL_LOG_LOG_H_ |
| |
| #include "absl/log/internal/log_impl.h" |
| |
| // LOG() |
| // |
| // `LOG` takes a single argument which is a severity level. Data streamed in |
| // comprise the logged message. |
| // Example: |
| // |
| // LOG(INFO) << "Found " << num_cookies << " cookies"; |
| #define LOG(severity) ABSL_LOG_INTERNAL_LOG_IMPL(_##severity) |
| |
| // PLOG() |
| // |
| // `PLOG` behaves like `LOG` except that a description of the current state of |
| // `errno` is appended to the streamed message. |
| #define PLOG(severity) ABSL_LOG_INTERNAL_PLOG_IMPL(_##severity) |
| |
| // DLOG() |
| // |
| // `DLOG` behaves like `LOG` in debug mode (i.e. `#ifndef NDEBUG`). Otherwise |
| // it compiles away and does nothing. Note that `DLOG(FATAL)` does not |
| // terminate the program if `NDEBUG` is defined. |
| #define DLOG(severity) ABSL_LOG_INTERNAL_DLOG_IMPL(_##severity) |
| |
| // `VLOG` uses numeric levels to provide verbose logging that can configured at |
| // runtime, including at a per-module level. `VLOG` statements are logged at |
| // `INFO` severity if they are logged at all; the numeric levels are on a |
| // different scale than the proper severity levels. Positive levels are |
| // disabled by default. Negative levels should not be used. |
| // Example: |
| // |
| // VLOG(1) << "I print when you run the program with --v=1 or higher"; |
| // VLOG(2) << "I print when you run the program with --v=2 or higher"; |
| // |
| // See vlog_is_on.h for further documentation, including the usage of the |
| // --vmodule flag to log at different levels in different source files. |
| // |
| // `VLOG` does not produce any output when verbose logging is not enabled. |
| // However, simply testing whether verbose logging is enabled can be expensive. |
| // If you don't intend to enable verbose logging in non-debug builds, consider |
| // using `DVLOG` instead. |
| #define VLOG(severity) ABSL_LOG_INTERNAL_VLOG_IMPL(severity) |
| |
| // `DVLOG` behaves like `VLOG` in debug mode (i.e. `#ifndef NDEBUG`). |
| // Otherwise, it compiles away and does nothing. |
| #define DVLOG(severity) ABSL_LOG_INTERNAL_DVLOG_IMPL(severity) |
| |
| // `LOG_IF` and friends add a second argument which specifies a condition. If |
| // the condition is false, nothing is logged. |
| // Example: |
| // |
| // LOG_IF(INFO, num_cookies > 10) << "Got lots of cookies"; |
| // |
| // There is no `VLOG_IF` because the order of evaluation of the arguments is |
| // ambiguous and the alternate spelling with an `if`-statement is trivial. |
| #define LOG_IF(severity, condition) \ |
| ABSL_LOG_INTERNAL_LOG_IF_IMPL(_##severity, condition) |
| #define PLOG_IF(severity, condition) \ |
| ABSL_LOG_INTERNAL_PLOG_IF_IMPL(_##severity, condition) |
| #define DLOG_IF(severity, condition) \ |
| ABSL_LOG_INTERNAL_DLOG_IF_IMPL(_##severity, condition) |
| |
| // LOG_EVERY_N |
| // |
| // An instance of `LOG_EVERY_N` increments a hidden zero-initialized counter |
| // every time execution passes through it and logs the specified message when |
| // the counter's value is a multiple of `n`, doing nothing otherwise. Each |
| // instance has its own counter. The counter's value can be logged by streaming |
| // the symbol `COUNTER`. `LOG_EVERY_N` is thread-safe. |
| // Example: |
| // |
| // LOG_EVERY_N(WARNING, 1000) << "Got a packet with a bad CRC (" << COUNTER |
| // << " total)"; |
| #define LOG_EVERY_N(severity, n) \ |
| ABSL_LOG_INTERNAL_LOG_EVERY_N_IMPL(_##severity, n) |
| |
| // LOG_FIRST_N |
| // |
| // `LOG_FIRST_N` behaves like `LOG_EVERY_N` except that the specified message is |
| // logged when the counter's value is less than `n`. `LOG_FIRST_N` is |
| // thread-safe. |
| #define LOG_FIRST_N(severity, n) \ |
| ABSL_LOG_INTERNAL_LOG_FIRST_N_IMPL(_##severity, n) |
| |
| // LOG_EVERY_POW_2 |
| // |
| // `LOG_EVERY_POW_2` behaves like `LOG_EVERY_N` except that the specified |
| // message is logged when the counter's value is a power of 2. |
| // `LOG_EVERY_POW_2` is thread-safe. |
| #define LOG_EVERY_POW_2(severity) \ |
| ABSL_LOG_INTERNAL_LOG_EVERY_POW_2_IMPL(_##severity) |
| |
| // LOG_EVERY_N_SEC |
| // |
| // An instance of `LOG_EVERY_N_SEC` uses a hidden state variable to log the |
| // specified message at most once every `n_seconds`. A hidden counter of |
| // executions (whether a message is logged or not) is also maintained and can be |
| // logged by streaming the symbol `COUNTER`. `LOG_EVERY_N_SEC` is thread-safe. |
| // Example: |
| // |
| // LOG_EVERY_N_SEC(INFO, 2.5) << "Got " << COUNTER << " cookies so far"; |
| #define LOG_EVERY_N_SEC(severity, n_seconds) \ |
| ABSL_LOG_INTERNAL_LOG_EVERY_N_SEC_IMPL(_##severity, n_seconds) |
| |
| #define PLOG_EVERY_N(severity, n) \ |
| ABSL_LOG_INTERNAL_PLOG_EVERY_N_IMPL(_##severity, n) |
| #define PLOG_FIRST_N(severity, n) \ |
| ABSL_LOG_INTERNAL_PLOG_FIRST_N_IMPL(_##severity, n) |
| #define PLOG_EVERY_POW_2(severity) \ |
| ABSL_LOG_INTERNAL_PLOG_EVERY_POW_2_IMPL(_##severity) |
| #define PLOG_EVERY_N_SEC(severity, n_seconds) \ |
| ABSL_LOG_INTERNAL_PLOG_EVERY_N_SEC_IMPL(_##severity, n_seconds) |
| |
| #define DLOG_EVERY_N(severity, n) \ |
| ABSL_LOG_INTERNAL_DLOG_EVERY_N_IMPL(_##severity, n) |
| #define DLOG_FIRST_N(severity, n) \ |
| ABSL_LOG_INTERNAL_DLOG_FIRST_N_IMPL(_##severity, n) |
| #define DLOG_EVERY_POW_2(severity) \ |
| ABSL_LOG_INTERNAL_DLOG_EVERY_POW_2_IMPL(_##severity) |
| #define DLOG_EVERY_N_SEC(severity, n_seconds) \ |
| ABSL_LOG_INTERNAL_DLOG_EVERY_N_SEC_IMPL(_##severity, n_seconds) |
| |
| #define VLOG_EVERY_N(severity, n) \ |
| ABSL_LOG_INTERNAL_VLOG_EVERY_N_IMPL(severity, n) |
| #define VLOG_FIRST_N(severity, n) \ |
| ABSL_LOG_INTERNAL_VLOG_FIRST_N_IMPL(severity, n) |
| #define VLOG_EVERY_POW_2(severity) \ |
| ABSL_LOG_INTERNAL_VLOG_EVERY_POW_2_IMPL(severity) |
| #define VLOG_EVERY_N_SEC(severity, n_seconds) \ |
| ABSL_LOG_INTERNAL_VLOG_EVERY_N_SEC_IMPL(severity, n_seconds) |
| |
| // `LOG_IF_EVERY_N` and friends behave as the corresponding `LOG_EVERY_N` |
| // but neither increment a counter nor log a message if condition is false (as |
| // `LOG_IF`). |
| // Example: |
| // |
| // LOG_IF_EVERY_N(INFO, (size > 1024), 10) << "Got the " << COUNTER |
| // << "th big cookie"; |
| #define LOG_IF_EVERY_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_LOG_IF_EVERY_N_IMPL(_##severity, condition, n) |
| #define LOG_IF_FIRST_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_LOG_IF_FIRST_N_IMPL(_##severity, condition, n) |
| #define LOG_IF_EVERY_POW_2(severity, condition) \ |
| ABSL_LOG_INTERNAL_LOG_IF_EVERY_POW_2_IMPL(_##severity, condition) |
| #define LOG_IF_EVERY_N_SEC(severity, condition, n_seconds) \ |
| ABSL_LOG_INTERNAL_LOG_IF_EVERY_N_SEC_IMPL(_##severity, condition, n_seconds) |
| |
| #define PLOG_IF_EVERY_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_PLOG_IF_EVERY_N_IMPL(_##severity, condition, n) |
| #define PLOG_IF_FIRST_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_PLOG_IF_FIRST_N_IMPL(_##severity, condition, n) |
| #define PLOG_IF_EVERY_POW_2(severity, condition) \ |
| ABSL_LOG_INTERNAL_PLOG_IF_EVERY_POW_2_IMPL(_##severity, condition) |
| #define PLOG_IF_EVERY_N_SEC(severity, condition, n_seconds) \ |
| ABSL_LOG_INTERNAL_PLOG_IF_EVERY_N_SEC_IMPL(_##severity, condition, n_seconds) |
| |
| #define DLOG_IF_EVERY_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_DLOG_IF_EVERY_N_IMPL(_##severity, condition, n) |
| #define DLOG_IF_FIRST_N(severity, condition, n) \ |
| ABSL_LOG_INTERNAL_DLOG_IF_FIRST_N_IMPL(_##severity, condition, n) |
| #define DLOG_IF_EVERY_POW_2(severity, condition) \ |
| ABSL_LOG_INTERNAL_DLOG_IF_EVERY_POW_2_IMPL(_##severity, condition) |
| #define DLOG_IF_EVERY_N_SEC(severity, condition, n_seconds) \ |
| ABSL_LOG_INTERNAL_DLOG_IF_EVERY_N_SEC_IMPL(_##severity, condition, n_seconds) |
| |
| #endif // ABSL_LOG_LOG_H_ |