ffmpeg

The ffmpeg module is a hand crafted port from the original configure build scripts.

Structure

Libraries

Each FFmpeg library is available as a cc_library target with two variants:

Bare targets vs with_defaults/ targets

Every library and binary target has two forms:

• Bare target (e.g. @ffmpeg//:avcodec) — all component flags default to False. No codecs, muxers, demuxers, or filters are compiled in unless you explicitly enable them via --@ffmpeg//:enable_<component>=True.
• with_defaults/ target (e.g. @ffmpeg//:with_defaults/avcodec) — a Bazel transition automatically enables all components appropriate for the target platform (OS + CPU). This matches a typical ./configure && make build.

Use with_defaults/ for most applications. Use bare targets when you need precise control over binary size by enabling only specific components.

Binaries

Both also have with_defaults/ variants (e.g. @ffmpeg//:with_defaults/ffmpeg).

Note that there is no ffplay binary as it requires SDL2 which is not in the bazel-central-registry. (bazelbuild/bazel-central-registry#7077)

Component flags

FFmpeg codecs, muxers, demuxers, parsers, bitstream filters, filters, and device I/O modules are individually gated by bool_flag settings. Each flag defaults to False and can be enabled on the command line or via .bazelrc:

bazel build @ffmpeg//:avcodec --@ffmpeg//:enable_h264_decoder=True --@ffmpeg//:enable_aac_decoder=True

The flag naming convention follows FFmpeg's configure script: enable_<component> where <component> is the lowercase name with type suffix. Examples:

Adding new versions

The Bazel overlay relies on several generated .bzl files that are produced by Python scripts and checked into the overlay. When adding a new FFmpeg version, these must be regenerated in order (later steps depend on earlier ones).

Why resolution is pre-computed

Unlike FFmpeg‘s configure script which probes the build host for available libraries and features, Bazel’s environment is fully static: library availability is determined by MODULE.bazel, and component selection is a build-time choice via bool_flag settings. There is no system to probe at build time for component selection purposes (system capability detection is handled separately by rules_cc_autoconf).

Because the dependency graph is static, generate_resolved_profiles.py pre-computes the full transitive closure of component dependencies for each (OS, CPU) combination and writes the results as flat dicts in component_resolved.bzl. The structure is:

• Private _RESOLVED_{OS} dicts with the common resolved state per OS
• Public RESOLVED_{OS}_{CPU} names (aliased to the OS base when identical, or full dicts when CPU-specific overrides exist)
• A RESOLVED_COMPONENTS map keyed by "{os}-{cpu}" (e.g. "linux-x86_64") consumed by the transition
• A RESOLVED_DEFAULT fallback for unknown platforms

The Bazel transition constructs the key from attr.os and attr.cpu, then does a single dict lookup -- no iterative resolution loops at build time.

Quick reference

All generator scripts accept --version <VERSION> to target a specific overlay directory (e.g. 7.1.1.bcr.beta.5). When omitted, the latest version from metadata.json is used automatically.

# Step 1: regenerate config header templates
python3 generate_config_defs.py /path/to/ffmpeg/source

# Step 2: regenerate per-component source lists
python3 generate_component_srcs.py /path/to/ffmpeg/source

# Step 3: regenerate resolved profiles
python3 generate_resolved_profiles.py

# Target a specific version:
python3 generate_component_srcs.py --version 7.1.1.bcr.beta.5 /path/to/ffmpeg/source

Adding a New FFmpeg Version to the BCR

When adding new versions, the following steps may be helpful.

1. Directory Setup

cp -r modules/ffmpeg/7.1.1 modules/ffmpeg/<NEW_VERSION>

Add "<NEW_VERSION>" to metadata.json "versions" array.

2. Files to Update

All paths below are relative to modules/ffmpeg/<NEW_VERSION>/.

config_defs.bzl

Update the version string in FFVERSION_H.

component_defs.bzl

Re-extract from the new FFmpeg configure script:

ffmpeg_config_checks.bzl

Diff the new configure for added/removed/changed feature-detection checks and mirror them as checks.AC_TRY_COMPILE entries.

BUILD.bazel

Update unconditional source lists (_AVUTIL_SRCS, _AVCODEC_BASE_SRCS, etc.) by diffing the new Makefiles' unconditional OBJS = / OBJS += lines. Check for new/removed headers in glob patterns and any new library dependencies.

Test BUILD.bazel files

Add or remove test targets in libavcodec/tests/, libavfilter/tests/, libavutil/tests/, libswscale/tests/, and tests/ if test sources changed.

3. Regenerating component_srcs.bzl

generate_component_srcs.py (at modules/ffmpeg/generate_component_srcs.py) is reusable across versions. It reads PROFILE_EVERYTHING from component_defs.bzl in the target overlay directory, parses OBJS-$(CONFIG_*) lines from the FFmpeg Makefiles, and writes component_srcs.bzl directly to the overlay.

Steps:

1. Update component_defs.bzl in the overlay first (the script depends on it).
2. Run:

   python3 generate_component_srcs.py [--version <VERSION>] /path/to/ffmpeg/source
   

3. New components are handled automatically as long as PROFILE_EVERYTHING is current.

Script tunables

If the new FFmpeg version introduces changes, these lists inside generate_component_srcs.py may need updating:

4. Regenerating component_resolved.bzl

generate_resolved_profiles.py reads component_defs.bzl and pre-computes the resolved component state for each (OS, CPU) combination:

• linux (aarch64, x86_64): CONFIGURE_DEFAULT_COMPONENTS + LINUX_COMPONENTS
• macos (aarch64, x86_64): CONFIGURE_DEFAULT_COMPONENTS + MACOS_COMPONENTS
• windows (aarch64, x86_64): CONFIGURE_DEFAULT_COMPONENTS + WINDOWS_COMPONENTS
• default: CONFIGURE_DEFAULT_COMPONENTS

Currently the aarch64 and x86_64 profiles for each OS are identical (architecture-specific behavior is handled by select() on source files, not component flags). When CPU-specific component lists are added to component_defs.bzl, the generator will produce distinct dicts per (OS, CPU) pair automatically.

For each profile, the script:

1. Enables all components in the profile
2. Propagates select and suggest edges to a fixpoint
3. Prunes components whose deps, deps_any, conflict, or select constraints are not satisfiable

Run after any change to component_defs.bzl:

python3 generate_resolved_profiles.py [--version <VERSION>]

The script prints a summary of pruned components (with reasons) to stderr, which is useful for verifying that the right components are being disabled.

5. x86 NASM Assembly

FFmpeg uses NASM-syntax .asm files for x86 SIMD optimizations (161 files in 7.1.1). These are compiled via rules_nasm and linked into each library through select() on @platforms//cpu:x86_64.

Key points for new versions:

• All .asm files are compiled unconditionally; the C init files gate registration via HAVE_X86ASM and component flags.
• config.asm is auto-generated from config.h by a genrule (converts #define to %define).
• Template .asm files (e.g. *_template.asm) must be excluded from srcs and listed in hdrs.
• Include-only files (x86inc.asm, x86util.asm) go in hdrs, not srcs.
• All nasm_library targets are tagged manual to avoid building on non-x86 platforms.

When updating, check each library's x86/Makefile for new .asm files. The glob patterns in BUILD.bazel pick up additions automatically. If a new library gains x86 assembly, add a corresponding nasm_library target and wire it into the cc_variant_library srcs.

6. External Library Dependencies

Components that wrap external libraries (e.g. libx264_encoder, alsa_indev) need conditional select() entries in the library target's deps so the external library is linked only when the component is enabled. The pattern is:

deps = [...] + select({
    "//:enable_libx264_encoder_is_true": ["@x264"],
    "//conditions:default": [],
}),

When adding a new version, check COMPONENT_REGISTRY in component_defs.bzl for entries with "deps" fields. If the dep maps to a bazel_dep in MODULE.bazel, ensure a matching select() exists on the appropriate library target (avcodec, avformat, avfilter, or avdevice).

Dependencies listed as "suggest" (e.g. bzlib, lzma) are optional -- the source code guards their usage behind autoconf CONFIG_* flags and compiles without them.

Bug Report Guidance

FFmpeg is a colossal project with enormous configurability. The Bazel Central Registry CI does not have sufficient infrastructure to test all supported FFmpeg components and features.

Consumers are asked to open a pull-request, not just file an issue. The maintainers of this FFmpeg Bazel integration are not users of every component or feature, and cannot be expected to diagnose and fix bugs they cannot reproduce. Fixes depend on contributions from the consumers who encounter them.

When identifying and reporting issues, please take the following steps:

1. Follow Bazel Central Registry guidance to create the issue.
2. Open a pull-request with the fix by introducing a new .bcr.* variant for the affected version.
3. Expand the presubmit pipelines where possible to add regression testing for the affected feature.