|  | # Copyright 2014 The BoringSSL Authors | 
|  | # | 
|  | # Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | # you may not use this file except in compliance with the License. | 
|  | # You may obtain a copy of the License at | 
|  | # | 
|  | #     https://www.apache.org/licenses/LICENSE-2.0 | 
|  | # | 
|  | # Unless required by applicable law or agreed to in writing, software | 
|  | # distributed under the License is distributed on an "AS IS" BASIS, | 
|  | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | # See the License for the specific language governing permissions and | 
|  | # limitations under the License. | 
|  |  | 
|  | cmake_minimum_required(VERSION 3.16) | 
|  |  | 
|  | # Defer enabling C and CXX languages. | 
|  | project(BoringSSL NONE) | 
|  |  | 
|  | # Don't install BoringSSL to system directories by default; it has no stable | 
|  | # ABI. Instead, default to an "install" directory under the source. | 
|  | if(CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT) | 
|  | set(CMAKE_INSTALL_PREFIX ${CMAKE_SOURCE_DIR}/install CACHE PATH "" FORCE) | 
|  | endif() | 
|  |  | 
|  | if(WIN32) | 
|  | # On Windows, prefer cl over gcc if both are available. By default most of | 
|  | # the CMake generators prefer gcc, even on Windows. | 
|  | set(CMAKE_GENERATOR_CC cl) | 
|  | endif() | 
|  |  | 
|  | include(cmake/go.cmake) | 
|  | include(cmake/paths.cmake) | 
|  | include(gen/sources.cmake) | 
|  |  | 
|  | enable_language(C) | 
|  | enable_language(CXX) | 
|  |  | 
|  | # TODO(crbug,com/389897612): Register tests with CTest. For now, we include this | 
|  | # only to pick up the standard |BUILD_TESTING| option. | 
|  | include(CTest) | 
|  | include(GNUInstallDirs) | 
|  |  | 
|  | set(INSTALL_ENABLED 1) | 
|  |  | 
|  | if(CMAKE_VERSION VERSION_LESS 3.21 AND | 
|  | CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR) | 
|  | set(PROJECT_IS_TOP_LEVEL 1) | 
|  | endif() | 
|  |  | 
|  | if(CMAKE_SYSTEM_NAME STREQUAL "Linux" AND NOT CMAKE_CROSSCOMPILING AND | 
|  | BUILD_TESTING) | 
|  | find_package(PkgConfig QUIET) | 
|  | if (PkgConfig_FOUND) | 
|  | pkg_check_modules(LIBUNWIND libunwind-generic>=1.3.0) | 
|  | if(LIBUNWIND_FOUND) | 
|  | add_definitions(-DBORINGSSL_HAVE_LIBUNWIND) | 
|  | else() | 
|  | message("libunwind not found. Disabling unwind tests.") | 
|  | endif() | 
|  | else() | 
|  | message("pkgconfig not found. Disabling unwind tests.") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | string(TOLOWER "${CMAKE_BUILD_TYPE}" CMAKE_BUILD_TYPE_LOWER) | 
|  | if(NOT FIPS) | 
|  | if(CMAKE_BUILD_TYPE_LOWER STREQUAL "relwithassert" OR | 
|  | NOT CMAKE_BUILD_TYPE_LOWER MATCHES "rel") | 
|  | add_definitions(-DBORINGSSL_DISPATCH_TEST) | 
|  | # CMake automatically connects include_directories to the NASM | 
|  | # command-line, but not add_definitions. | 
|  | set(CMAKE_ASM_NASM_FLAGS "${CMAKE_ASM_NASM_FLAGS} -DBORINGSSL_DISPATCH_TEST") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | # Add a RelWithAsserts build configuration. It is the same as Release, except it | 
|  | # does not define NDEBUG, so asserts run. | 
|  | foreach(VAR CMAKE_C_FLAGS CMAKE_CXX_FLAGS CMAKE_ASM_FLAGS) | 
|  | string(REGEX REPLACE "(^| )[/-]DNDEBUG( |$)" " " "${VAR}_RELWITHASSERTS" | 
|  | "${${VAR}_RELEASE}") | 
|  | endforeach() | 
|  |  | 
|  | if(BORINGSSL_PREFIX AND BORINGSSL_PREFIX_SYMBOLS) | 
|  | require_go() | 
|  | add_definitions(-DBORINGSSL_PREFIX=${BORINGSSL_PREFIX}) | 
|  | # CMake automatically connects include_directories to the NASM command-line, | 
|  | # but not add_definitions. | 
|  | set(CMAKE_ASM_NASM_FLAGS "${CMAKE_ASM_NASM_FLAGS} -DBORINGSSL_PREFIX=${BORINGSSL_PREFIX}") | 
|  |  | 
|  | # Use "symbol_prefix_include" to store generated header files | 
|  | include_directories(${CMAKE_CURRENT_BINARY_DIR}/symbol_prefix_include) | 
|  | add_custom_command( | 
|  | OUTPUT symbol_prefix_include/boringssl_prefix_symbols.h | 
|  | symbol_prefix_include/boringssl_prefix_symbols_asm.h | 
|  | symbol_prefix_include/boringssl_prefix_symbols_nasm.inc | 
|  | COMMAND ${CMAKE_COMMAND} -E make_directory ${CMAKE_CURRENT_BINARY_DIR}/symbol_prefix_include | 
|  | COMMAND ${GO_EXECUTABLE} run ${CMAKE_CURRENT_SOURCE_DIR}/util/make_prefix_headers.go -out ${CMAKE_CURRENT_BINARY_DIR}/symbol_prefix_include ${BORINGSSL_PREFIX_SYMBOLS} | 
|  | DEPENDS util/make_prefix_headers.go | 
|  | ${BORINGSSL_PREFIX_SYMBOLS}) | 
|  |  | 
|  | # add_dependencies needs a target, not a file, so we add an intermediate | 
|  | # target. | 
|  | add_custom_target( | 
|  | boringssl_prefix_symbols | 
|  | DEPENDS symbol_prefix_include/boringssl_prefix_symbols.h | 
|  | symbol_prefix_include/boringssl_prefix_symbols_asm.h | 
|  | symbol_prefix_include/boringssl_prefix_symbols_nasm.inc) | 
|  | elseif(BORINGSSL_PREFIX OR BORINGSSL_PREFIX_SYMBOLS) | 
|  | message(FATAL_ERROR "Must specify both or neither of BORINGSSL_PREFIX and BORINGSSL_PREFIX_SYMBOLS") | 
|  | else() | 
|  | add_custom_target(boringssl_prefix_symbols) | 
|  | endif() | 
|  |  | 
|  | if(CMAKE_CXX_COMPILER_ID MATCHES "Clang") | 
|  | set(CLANG 1) | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_CXX_STANDARD 17) | 
|  | set(CMAKE_CXX_STANDARD_REQUIRED ON) | 
|  | set(CMAKE_C_STANDARD 11) | 
|  | set(CMAKE_C_STANDARD_REQUIRED ON) | 
|  |  | 
|  | if(CMAKE_COMPILER_IS_GNUCXX OR CLANG) | 
|  | # Note clang-cl is odd and sets both CLANG and MSVC. We base our configuration | 
|  | # primarily on our normal Clang one. | 
|  | set(C_CXX_FLAGS "-fno-strict-aliasing -Werror -Wformat=2 -Wsign-compare -Wwrite-strings -Wvla -Wshadow -Wtype-limits -Wmissing-field-initializers") | 
|  | if(MSVC) | 
|  | # clang-cl sets different default warnings than clang. It also treats -Wall | 
|  | # as -Weverything, to match MSVC. Instead -W3 is the alias for -Wall. | 
|  | # See http://llvm.org/viewvc/llvm-project?view=revision&revision=319116 | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -W3 -Wno-unused-parameter -fmsc-version=1900") | 
|  | else() | 
|  | if(CMAKE_SYSTEM_NAME STREQUAL "Emscripten") | 
|  | # emscripten's emcc/clang does not accept the "-ggdb" flag. | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -g") | 
|  | else() | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -ggdb") | 
|  | endif() | 
|  |  | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wall -fvisibility=hidden -fno-common") | 
|  | endif() | 
|  |  | 
|  | if(CLANG) | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wnewline-eof -Wextra-semi -fcolor-diagnostics") | 
|  | else() | 
|  | # GCC (at least 4.8.4) has a bug where it'll find unreachable free() calls | 
|  | # and declare that the code is trying to free a stack pointer. | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wno-free-nonheap-object") | 
|  | endif() | 
|  |  | 
|  | # -Wstring-concatenation was added in Clang 12.0.0, which corresponds to | 
|  | # AppleClang 13.0.0 per the table in | 
|  | # https://en.wikipedia.org/wiki/Xcode#Toolchain_versions | 
|  | if((CMAKE_C_COMPILER_ID STREQUAL "Clang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "12.0.0") OR | 
|  | (CMAKE_C_COMPILER_ID STREQUAL "AppleClang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "13.0.0")) | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wstring-concatenation") | 
|  | endif() | 
|  |  | 
|  | # Clang 12's -Wframe-larger-than reportedly does not work in clang-cl. See | 
|  | # https://crbug.com/boringssl/709. Clang 13 includes the following fix, which | 
|  | # may be related. Speculatively gate on Clang 13. That corresponds to | 
|  | # AppleClang 13.1.6. | 
|  | # https://github.com/llvm/llvm-project/commit/6aaf4fa2885600b0e31042071ad06f78218ab0f2 | 
|  | if((CMAKE_C_COMPILER_ID STREQUAL "Clang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "13.0.0") OR | 
|  | (CMAKE_C_COMPILER_ID STREQUAL "AppleClang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "13.1.6")) | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wframe-larger-than=25344") | 
|  | endif() | 
|  |  | 
|  | # -Wctad-maybe-unsupported was added in Clang 10, which is AppleClang 12.0.0. | 
|  | if((CMAKE_C_COMPILER_ID STREQUAL "Clang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "10.0.0") OR | 
|  | (CMAKE_C_COMPILER_ID STREQUAL "AppleClang" AND | 
|  | CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "12.0.0")) | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wctad-maybe-unsupported") | 
|  | endif() | 
|  |  | 
|  | if(CLANG OR CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "7.0.0") | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wimplicit-fallthrough") | 
|  | endif() | 
|  |  | 
|  | if(CMAKE_COMPILER_IS_GNUCXX) | 
|  | set(C_CXX_FLAGS "${C_CXX_FLAGS} -Wformat-signedness") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${C_CXX_FLAGS} -Wmissing-prototypes -Wold-style-definition -Wstrict-prototypes") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${C_CXX_FLAGS} -Wmissing-declarations -Wnon-virtual-dtor") | 
|  |  | 
|  | # In GCC, -Wmissing-declarations is the C++ spelling of -Wmissing-prototypes | 
|  | # and using the wrong one is an error. In Clang, -Wmissing-prototypes is the | 
|  | # spelling for both and -Wmissing-declarations is some other warning. | 
|  | # | 
|  | # https://gcc.gnu.org/onlinedocs/gcc-7.1.0/gcc/Warning-Options.html#Warning-Options | 
|  | # https://clang.llvm.org/docs/DiagnosticsReference.html#wmissing-prototypes | 
|  | # https://clang.llvm.org/docs/DiagnosticsReference.html#wmissing-declarations | 
|  | if(CLANG) | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wmissing-prototypes") | 
|  | endif() | 
|  | elseif(MSVC) | 
|  | set(MSVC_DISABLED_WARNINGS_LIST | 
|  | "C4100" # 'exarg' : unreferenced formal parameter | 
|  | "C4127" # conditional expression is constant | 
|  | "C4244" # 'function' : conversion from 'int' to 'uint8_t', | 
|  | # possible loss of data | 
|  | "C4267" # conversion from 'size_t' to 'int', possible loss of data | 
|  | "C4702" # unreachable code; MSVC's warning is too aggressive. See | 
|  | # https://crbug.com/385161043 | 
|  | "C4706" # assignment within conditional expression | 
|  | ) | 
|  | string(REPLACE "C" " -wd" MSVC_DISABLED_WARNINGS_STR | 
|  | ${MSVC_DISABLED_WARNINGS_LIST}) | 
|  | set(CMAKE_C_FLAGS   "${CMAKE_C_FLAGS} -utf-8 -W4 -WX ${MSVC_DISABLED_WARNINGS_STR}") | 
|  | # Without /Zc:__cplusplus, MSVC does not define the right value for | 
|  | # __cplusplus. See https://devblogs.microsoft.com/cppblog/msvc-now-correctly-reports-__cplusplus/ | 
|  | # If this becomes too problematic for downstream code, we can look at | 
|  | # _MSVC_LANG. | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -utf-8 -W4 -WX ${MSVC_DISABLED_WARNINGS_STR} -Zc:__cplusplus") | 
|  | endif() | 
|  |  | 
|  | if(WIN32) | 
|  | add_definitions(-D_HAS_EXCEPTIONS=0) | 
|  | add_definitions(-DWIN32_LEAN_AND_MEAN) | 
|  | add_definitions(-DNOMINMAX) | 
|  | # Allow use of fopen. | 
|  | add_definitions(-D_CRT_SECURE_NO_WARNINGS) | 
|  | endif() | 
|  |  | 
|  | # pthread_rwlock_t on Linux requires a feature flag. We limit this to Linux | 
|  | # because, on Apple platforms, it instead disables APIs we use. See compat(5) | 
|  | # and sys/cdefs.h. Reportedly, FreeBSD also breaks when this is set. See | 
|  | # https://crbug.com/boringssl/471. | 
|  | if(CMAKE_SYSTEM_NAME STREQUAL "Linux") | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -D_XOPEN_SOURCE=700") | 
|  | endif() | 
|  |  | 
|  | if(FUZZ) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "You need to build with Clang for fuzzing to work") | 
|  | endif() | 
|  |  | 
|  | if(CMAKE_C_COMPILER_VERSION VERSION_LESS "6.0.0") | 
|  | message(FATAL_ERROR "You need Clang ≥ 6.0.0") | 
|  | endif() | 
|  |  | 
|  | add_definitions(-DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION) | 
|  | set(RUNNER_ARGS "-deterministic" "-fuzzer" "-shim-config" "fuzzer_mode.json") | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address,fuzzer-no-link -fsanitize-coverage=edge,indirect-calls") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address,fuzzer-no-link -fsanitize-coverage=edge,indirect-calls") | 
|  | endif() | 
|  |  | 
|  | add_definitions(-DBORINGSSL_IMPLEMENTATION) | 
|  |  | 
|  | if(BUILD_SHARED_LIBS) | 
|  | add_definitions(-DBORINGSSL_SHARED_LIBRARY) | 
|  | # Enable position-independent code globally. This is needed because | 
|  | # some library targets are OBJECT libraries. | 
|  | set(CMAKE_POSITION_INDEPENDENT_CODE TRUE) | 
|  | endif() | 
|  |  | 
|  | if(MSAN) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "Cannot enable MSAN unless using Clang") | 
|  | endif() | 
|  |  | 
|  | if(ASAN) | 
|  | message(FATAL_ERROR "ASAN and MSAN are mutually exclusive") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=memory -fsanitize-memory-track-origins -fno-omit-frame-pointer") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=memory -fsanitize-memory-track-origins -fno-omit-frame-pointer") | 
|  | set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -fsanitize=memory -fsanitize-memory-track-origins -fno-omit-frame-pointer") | 
|  | endif() | 
|  |  | 
|  | if(ASAN) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "Cannot enable ASAN unless using Clang") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=address -fsanitize-address-use-after-scope -fno-omit-frame-pointer") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=address -fsanitize-address-use-after-scope -fno-omit-frame-pointer") | 
|  | endif() | 
|  |  | 
|  | if(CFI) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "Cannot enable CFI unless using Clang") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=cfi -fno-sanitize-trap=cfi -flto=thin") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=cfi -fno-sanitize-trap=cfi -flto=thin") | 
|  | # We use Chromium's copy of clang, which requires -fuse-ld=lld if building | 
|  | # with -flto. That, in turn, can't handle -ggdb. | 
|  | set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fuse-ld=lld") | 
|  | string(REPLACE "-ggdb" "-g" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}") | 
|  | string(REPLACE "-ggdb" "-g" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}") | 
|  | # -flto causes object files to contain LLVM bitcode. Mixing those with | 
|  | # assembly output in the same static library breaks the linker. | 
|  | set(OPENSSL_NO_ASM "1") | 
|  | endif() | 
|  |  | 
|  | if(TSAN) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "Cannot enable TSAN unless using Clang") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=thread") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=thread") | 
|  | set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fsanitize=thread") | 
|  | endif() | 
|  |  | 
|  | if(UBSAN) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "Cannot enable UBSAN unless using Clang") | 
|  | endif() | 
|  |  | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fsanitize=undefined") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=undefined") | 
|  | set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fsanitize=undefined") | 
|  |  | 
|  | if(NOT UBSAN_RECOVER) | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-sanitize-recover=undefined") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-sanitize-recover=undefined") | 
|  | set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fno-sanitize-recover=undefined") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(GCOV) | 
|  | set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fprofile-arcs -ftest-coverage") | 
|  | set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fprofile-arcs -ftest-coverage") | 
|  | endif() | 
|  |  | 
|  | if(FIPS) | 
|  | require_go() | 
|  | add_definitions(-DBORINGSSL_FIPS) | 
|  | if(FIPS_BREAK_TEST) | 
|  | add_definitions("-DBORINGSSL_FIPS_BREAK_${FIPS_BREAK_TEST}=1") | 
|  | endif() | 
|  | # The FIPS integrity check does not work for ASan and MSan builds. | 
|  | if(NOT ASAN AND NOT MSAN) | 
|  | if(BUILD_SHARED_LIBS) | 
|  | set(FIPS_SHARED "1") | 
|  | else() | 
|  | set(FIPS_DELOCATE "1") | 
|  | endif() | 
|  | endif() | 
|  | if(FIPS_SHARED) | 
|  | # The Android CMake files set -ffunction-sections and -fdata-sections, | 
|  | # which is incompatible with FIPS_SHARED. | 
|  | set(CMAKE_C_FLAGS | 
|  | "${CMAKE_C_FLAGS} -fno-function-sections -fno-data-sections") | 
|  | set(CMAKE_CXX_FLAGS | 
|  | "${CMAKE_CXX_FLAGS} -fno-function-sections -fno-data-sections") | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(OPENSSL_SMALL) | 
|  | add_definitions(-DOPENSSL_SMALL) | 
|  | endif() | 
|  |  | 
|  | if(CONSTANT_TIME_VALIDATION) | 
|  | add_definitions(-DBORINGSSL_CONSTANT_TIME_VALIDATION) | 
|  | endif() | 
|  |  | 
|  | if(MALLOC_FAILURE_TESTING) | 
|  | add_definitions(-DBORINGSSL_MALLOC_FAILURE_TESTING) | 
|  | endif() | 
|  |  | 
|  | if(OPENSSL_NO_ASM) | 
|  | add_definitions(-DOPENSSL_NO_ASM) | 
|  | endif() | 
|  |  | 
|  | if(FIPS_DELOCATE OR NOT OPENSSL_NO_ASM) | 
|  | # On x86 and x86_64 Windows, we use the NASM output. | 
|  | if(WIN32 AND CMAKE_SYSTEM_PROCESSOR MATCHES "AMD64|x86_64|amd64|x86|i[3-6]86") | 
|  | enable_language(ASM_NASM) | 
|  | set(OPENSSL_NASM TRUE) | 
|  | set(CMAKE_ASM_NASM_FLAGS "${CMAKE_ASM_NASM_FLAGS} -gcv8") | 
|  | else() | 
|  | enable_language(ASM) | 
|  | if (NOT OPENSSL_NO_ASM) | 
|  | set(OPENSSL_ASM TRUE) | 
|  | endif() | 
|  | # Work around https://gitlab.kitware.com/cmake/cmake/-/issues/20771 in older | 
|  | # CMake versions. | 
|  | if(APPLE AND CMAKE_VERSION VERSION_LESS 3.19) | 
|  | if(CMAKE_OSX_SYSROOT) | 
|  | set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -isysroot \"${CMAKE_OSX_SYSROOT}\"") | 
|  | endif() | 
|  | foreach(arch ${CMAKE_OSX_ARCHITECTURES}) | 
|  | set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -arch ${arch}") | 
|  | endforeach() | 
|  | endif() | 
|  | if(NOT WIN32) | 
|  | set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -Wa,--noexecstack") | 
|  | endif() | 
|  | # Clang's integerated assembler does not support debug symbols. | 
|  | if(NOT CMAKE_ASM_COMPILER_ID MATCHES "Clang") | 
|  | set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -Wa,-g") | 
|  | endif() | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(OPENSSL_NO_SSE2_FOR_TESTING) | 
|  | add_definitions(-DOPENSSL_NO_SSE2_FOR_TESTING) | 
|  | endif() | 
|  |  | 
|  | if(USE_CUSTOM_LIBCXX) | 
|  | if(NOT CLANG) | 
|  | message(FATAL_ERROR "USE_CUSTOM_LIBCXX only supported with Clang") | 
|  | endif() | 
|  |  | 
|  | # CMake does not allow installing a library without installing dependencies. | 
|  | # If we installed libcrypto, we'd have to install our custom libc++, which | 
|  | # does not make sense. As this is a test-only configuration, disable | 
|  | # installing. | 
|  | set(INSTALL_ENABLED 0) | 
|  |  | 
|  | # CMAKE_CXX_FLAGS ends up in the linker flags as well, so use | 
|  | # add_compile_options. There does not appear to be a way to set | 
|  | # language-specific compile-only flags. | 
|  | add_compile_options("-nostdinc++") | 
|  | set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib++") | 
|  | include_directories( | 
|  | SYSTEM | 
|  | util/bot/libcxx-config | 
|  | util/bot/libcxx/include | 
|  | util/bot/libcxxabi/include | 
|  | ) | 
|  |  | 
|  | # This is patterned after buildtools/third_party/libc++/BUILD.gn and | 
|  | # buildtools/third_party/libc++abi/BUILD.gn in Chromium. | 
|  |  | 
|  | file(GLOB LIBCXX_SOURCES "util/bot/libcxx/src/*.cpp") | 
|  | file(GLOB LIBCXXABI_SOURCES "util/bot/libcxxabi/src/*.cpp") | 
|  |  | 
|  | # This file is meant for exception-less builds. | 
|  | list(REMOVE_ITEM LIBCXXABI_SOURCES "trunk/src/cxa_noexception.cpp") | 
|  | # libc++ also defines new and delete. | 
|  | list(REMOVE_ITEM LIBCXXABI_SOURCES "trunk/src/stdlib_new_delete.cpp") | 
|  | if(TSAN) | 
|  | # ThreadSanitizer tries to intercept these symbols. Skip them to avoid | 
|  | # symbol conflicts. | 
|  | list(REMOVE_ITEM LIBCXXABI_SOURCES "trunk/src/cxa_guard.cpp") | 
|  | endif() | 
|  |  | 
|  | add_library(libcxxabi ${LIBCXXABI_SOURCES}) | 
|  | target_compile_definitions( | 
|  | libcxxabi PRIVATE | 
|  | -D_LIBCPP_ENABLE_CXX17_REMOVED_UNEXPECTED_FUNCTIONS | 
|  | ) | 
|  |  | 
|  | add_library(libcxx ${LIBCXX_SOURCES}) | 
|  | if(ASAN OR MSAN OR TSAN) | 
|  | # Sanitizers try to intercept new and delete. | 
|  | target_compile_definitions( | 
|  | libcxx PRIVATE | 
|  | -D_LIBCPP_DISABLE_NEW_DELETE_DEFINITIONS | 
|  | ) | 
|  | endif() | 
|  | target_compile_definitions( | 
|  | libcxx PRIVATE | 
|  | -D_LIBCPP_BUILDING_LIBRARY | 
|  | -DLIBCXX_BUILDING_LIBCXXABI | 
|  | -DLIBC_NAMESPACE=bssl_llvm_libc | 
|  | ) | 
|  | # LLVM libc++ depends on some shared headers from LLVM libc. | 
|  | target_include_directories(libcxx PRIVATE util/bot/llvm-libc) | 
|  | set_target_properties( | 
|  | libcxx libcxxabi PROPERTIES | 
|  | COMPILE_FLAGS "-Wno-missing-prototypes -Wno-implicit-fallthrough" | 
|  | # libc++ and libc++abi must be built in C++23 mode. | 
|  | CXX_STANDARD 23 | 
|  | CXX_STANDARD_REQUIRED TRUE | 
|  | ) | 
|  | # libc++abi depends on libc++ internal headers. | 
|  | set_property(TARGET libcxx libcxxabi APPEND PROPERTY INCLUDE_DIRECTORIES "${CMAKE_CURRENT_SOURCE_DIR}/util/bot/libcxx/src") | 
|  | target_link_libraries(libcxx libcxxabi) | 
|  | endif() | 
|  |  | 
|  | if(BUILD_TESTING) | 
|  | # Add minimal googletest targets. The provided one has many side-effects, and | 
|  | # googletest has a very straightforward build. | 
|  | add_library( | 
|  | boringssl_gtest | 
|  | third_party/googletest/googlemock/src/gmock-all.cc | 
|  | third_party/googletest/googletest/src/gtest-all.cc | 
|  | ) | 
|  | if(USE_CUSTOM_LIBCXX) | 
|  | target_link_libraries(boringssl_gtest libcxx) | 
|  | endif() | 
|  | target_include_directories( | 
|  | boringssl_gtest | 
|  | PUBLIC | 
|  | third_party/googletest/googlemock/include | 
|  | third_party/googletest/googletest/include | 
|  | PRIVATE | 
|  | third_party/googletest/googlemock | 
|  | third_party/googletest/googletest | 
|  | ) | 
|  |  | 
|  | # Declare a dummy target to build all unit tests. Test targets should inject | 
|  | # themselves as dependencies next to the target definition. | 
|  | add_custom_target(boringssl_all_tests) | 
|  |  | 
|  | add_subdirectory(ssl/test) | 
|  | endif() | 
|  |  | 
|  | if(OPENSSL_ASM) | 
|  | set(CRYPTO_SOURCES_ASM_USED ${CRYPTO_SOURCES_ASM}) | 
|  | set(BCM_SOURCES_ASM_USED ${BCM_SOURCES_ASM}) | 
|  | set(TEST_SUPPORT_SOURCES_ASM_USED ${TEST_SUPPORT_SOURCES_ASM}) | 
|  | elseif(OPENSSL_NASM) | 
|  | set(CRYPTO_SOURCES_ASM_USED ${CRYPTO_SOURCES_NASM}) | 
|  | set(BCM_SOURCES_ASM_USED ${BCM_SOURCES_NASM}) | 
|  | set(TEST_SUPPORT_SOURCES_ASM_USED ${TEST_SUPPORT_SOURCES_NASM}) | 
|  | endif() | 
|  |  | 
|  | if(FIPS_DELOCATE AND FIPS_SHARED) | 
|  | message(FATAL_ERROR "Can't set both delocate and shared mode for FIPS build") | 
|  | endif() | 
|  |  | 
|  | # OSS-Fuzz relies on BORINGSSL_ALLOW_CXX_RUNTIME because -fno-rtti and | 
|  | # -fsanitize=vptr are incompatible. | 
|  | set(NO_CXX_RUNTIME_FLAGS) | 
|  | if(NOT MSVC AND NOT BORINGSSL_ALLOW_CXX_RUNTIME) | 
|  | # Without -fno-exceptions, use of std::unique_ptr emits a call to | 
|  | # std::terminate. | 
|  | set(NO_CXX_RUNTIME_FLAGS -fno-exceptions -fno-rtti) | 
|  | endif() | 
|  |  | 
|  | if(FIPS_DELOCATE) | 
|  | add_library(bcm_c_generated_asm STATIC ${BCM_SOURCES}) | 
|  | # The C++ code in libcrypto shouldn't depend on libstdc++. | 
|  | target_compile_options(bcm_c_generated_asm PRIVATE $<$<COMPILE_LANGUAGE:CXX>:${NO_CXX_RUNTIME_FLAGS}> "-S") | 
|  | add_dependencies(bcm_c_generated_asm boringssl_prefix_symbols) | 
|  | target_include_directories(bcm_c_generated_asm PRIVATE ${PROJECT_SOURCE_DIR}/include) | 
|  | set_target_properties(bcm_c_generated_asm PROPERTIES POSITION_INDEPENDENT_CODE ON) | 
|  | if(CLANG) | 
|  | # Clang warns when passing both -c (from CMake) and -S. | 
|  | target_compile_options(bcm_c_generated_asm PRIVATE "-Wno-unused-command-line-argument") | 
|  | endif() | 
|  | if(CFI) | 
|  | # Delocate needs real assembly code so we need to disable CFI and LTO in the FIPS module. | 
|  | target_compile_options(bcm_c_generated_asm PRIVATE "-fno-lto" "-fno-sanitize=cfi") | 
|  | endif() | 
|  |  | 
|  | set(TARGET_FLAG "") | 
|  | if(CMAKE_ASM_COMPILER_TARGET) | 
|  | set(TARGET_FLAG "--target=${CMAKE_ASM_COMPILER_TARGET}") | 
|  | endif() | 
|  |  | 
|  | go_executable(delocate boringssl.googlesource.com/boringssl.git/util/fipstools/delocate) | 
|  | add_custom_command( | 
|  | OUTPUT bcm-delocated.S | 
|  | COMMAND ${CMAKE_CURRENT_BINARY_DIR}/delocate | 
|  | -a $<TARGET_FILE:bcm_c_generated_asm> | 
|  | -o ${CMAKE_CURRENT_BINARY_DIR}/bcm-delocated.S | 
|  | -cc ${CMAKE_ASM_COMPILER} | 
|  | -cc-flags "${TARGET_FLAG} ${CMAKE_ASM_FLAGS}" | 
|  | ${BCM_SOURCES_ASM_USED} | 
|  | ${CRYPTO_HEADERS} | 
|  | DEPENDS bcm_c_generated_asm | 
|  | delocate | 
|  | ${BCM_SOURCES_ASM_USED} | 
|  | ${CRYPTO_HEADERS} | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} | 
|  | ) | 
|  |  | 
|  | add_library(bcm_hashunset STATIC bcm-delocated.S) | 
|  | set_target_properties(bcm_hashunset PROPERTIES POSITION_INDEPENDENT_CODE ON) | 
|  | set_target_properties(bcm_hashunset PROPERTIES LINKER_LANGUAGE C) | 
|  |  | 
|  | go_executable(inject_hash | 
|  | boringssl.googlesource.com/boringssl.git/util/fipstools/inject_hash) | 
|  | add_custom_command( | 
|  | OUTPUT bcm.o | 
|  | COMMAND ./inject_hash -o bcm.o -in-archive $<TARGET_FILE:bcm_hashunset> | 
|  | DEPENDS bcm_hashunset inject_hash | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} | 
|  | ) | 
|  | set(CRYPTO_FIPS_OBJECTS bcm.o) | 
|  | elseif(FIPS_SHARED) | 
|  | if(NOT BUILD_SHARED_LIBS) | 
|  | message(FATAL_ERROR "FIPS_SHARED set but not BUILD_SHARED_LIBS") | 
|  | endif() | 
|  |  | 
|  | add_library(bcm_library STATIC ${BCM_SOURCES} ${BCM_SOURCES_ASM_USED}) | 
|  | # The C++ code in libcrypto shouldn't depend on libstdc++. | 
|  | target_compile_options(bcm_library PRIVATE $<$<COMPILE_LANGUAGE:CXX>:${NO_CXX_RUNTIME_FLAGS}>) | 
|  | add_dependencies(bcm_library boringssl_prefix_symbols) | 
|  | target_include_directories(bcm_library PRIVATE ${PROJECT_SOURCE_DIR}/include) | 
|  |  | 
|  | add_custom_command( | 
|  | OUTPUT bcm.o | 
|  | COMMAND ${CMAKE_LINKER} -r -T ${CMAKE_CURRENT_SOURCE_DIR}/crypto/fipsmodule/fips_shared.lds -o bcm.o --whole-archive $<TARGET_FILE:bcm_library> | 
|  | DEPENDS bcm_library crypto/fipsmodule/fips_shared.lds | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} | 
|  | ) | 
|  | set(CRYPTO_FIPS_OBJECTS bcm.o) | 
|  | else() | 
|  | add_library(fipsmodule OBJECT ${BCM_SOURCES} ${BCM_SOURCES_ASM_USED}) | 
|  | # The C++ code in libcrypto shouldn't depend on libstdc++. | 
|  | target_compile_options(fipsmodule PRIVATE $<$<COMPILE_LANGUAGE:CXX>:${NO_CXX_RUNTIME_FLAGS}>) | 
|  | add_dependencies(fipsmodule boringssl_prefix_symbols) | 
|  | target_include_directories(fipsmodule PRIVATE ${PROJECT_SOURCE_DIR}/include) | 
|  | set(CRYPTO_FIPS_OBJECTS $<TARGET_OBJECTS:fipsmodule>) | 
|  | endif() | 
|  |  | 
|  | add_library(crypto ${CRYPTO_SOURCES} ${CRYPTO_FIPS_OBJECTS} ${CRYPTO_SOURCES_ASM_USED}) | 
|  | # The C++ code in libcrypto shouldn't depend on libstdc++. | 
|  | target_compile_options(crypto PRIVATE $<$<COMPILE_LANGUAGE:CXX>:${NO_CXX_RUNTIME_FLAGS}>) | 
|  | target_include_directories(crypto PUBLIC | 
|  | $<BUILD_INTERFACE:${PROJECT_SOURCE_DIR}/include> | 
|  | $<INSTALL_INTERFACE:include> | 
|  | ) | 
|  | set_property(TARGET crypto PROPERTY EXPORT_NAME Crypto) | 
|  |  | 
|  | if(FIPS_SHARED) | 
|  | # Rewrite libcrypto.so to inject the correct module hash value. This assumes | 
|  | # UNIX-style library naming, but we only support FIPS mode on Linux anyway. | 
|  | add_custom_command( | 
|  | TARGET crypto POST_BUILD | 
|  | COMMAND ${GO_EXECUTABLE} run | 
|  | ${CMAKE_CURRENT_SOURCE_DIR}/util/fipstools/inject_hash/inject_hash.go | 
|  | -o libcrypto.so -in-object libcrypto.so | 
|  | # The DEPENDS argument to a POST_BUILD rule appears to be ignored. Thus | 
|  | # go_executable isn't used (as it doesn't get built), but we list this | 
|  | # dependency anyway in case it starts working in some CMake version. | 
|  | DEPENDS util/fipstools/inject_hash/inject_hash.go | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} | 
|  | ) | 
|  | endif() | 
|  |  | 
|  | add_dependencies(crypto boringssl_prefix_symbols) | 
|  | if(WIN32) | 
|  | target_link_libraries(crypto ws2_32) | 
|  | endif() | 
|  |  | 
|  | # CMAKE_SYSTEM_NAME is "Generic" for embedded OSes: | 
|  | # https://cmake.org/cmake/help/book/mastering-cmake/chapter/Cross%20Compiling%20With%20CMake.html#toolchain-files | 
|  | # | 
|  | # For now we assume embedded OSes do not have threads. Additionally, the Threads | 
|  | # package does not work with Android, but Android does not require any extra | 
|  | # parameters to link pthreads. | 
|  | if(NOT CMAKE_SYSTEM_NAME MATCHES "^(Generic|Android)$") | 
|  | find_package(Threads REQUIRED) | 
|  | target_link_libraries(crypto Threads::Threads) | 
|  | endif() | 
|  |  | 
|  | # Every target depends on crypto, so we add libcxx as a dependency here to | 
|  | # simplify injecting it everywhere. | 
|  | if(USE_CUSTOM_LIBCXX) | 
|  | target_link_libraries(crypto libcxx) | 
|  | endif() | 
|  |  | 
|  | add_library(ssl ${SSL_SOURCES}) | 
|  | # Although libssl also provides headers that require an include directory, the | 
|  | # flag is already specified by libcrypto, so we omit target_include_directories | 
|  | # here. | 
|  | set_property(TARGET ssl PROPERTY EXPORT_NAME SSL) | 
|  | target_link_libraries(ssl crypto) | 
|  |  | 
|  | add_library(decrepit ${DECREPIT_SOURCES}) | 
|  | target_link_libraries(decrepit ssl crypto) | 
|  |  | 
|  | if(APPLE) | 
|  | set(PKI_CXX_FLAGS "-fno-aligned-new") | 
|  | endif() | 
|  | add_library(pki ${PKI_SOURCES}) | 
|  | target_link_libraries(pki crypto) | 
|  | target_compile_options(pki PRIVATE ${PKI_CXX_FLAGS}) | 
|  |  | 
|  | if(BUILD_TESTING) | 
|  | add_library(test_support_lib STATIC | 
|  | ${TEST_SUPPORT_SOURCES} ${TEST_SUPPORT_SOURCES_ASM_USED}) | 
|  | if(LIBUNWIND_FOUND) | 
|  | target_compile_options(test_support_lib PRIVATE ${LIBUNWIND_CFLAGS_OTHER}) | 
|  | target_include_directories(test_support_lib PRIVATE ${LIBUNWIND_INCLUDE_DIRS}) | 
|  | target_link_libraries(test_support_lib ${LIBUNWIND_LDFLAGS}) | 
|  | endif() | 
|  | if(WIN32) | 
|  | target_link_libraries(test_support_lib dbghelp) | 
|  | endif() | 
|  | target_link_libraries(test_support_lib boringssl_gtest crypto) | 
|  |  | 
|  | # urandom_test is a separate binary because it needs to be able to observe the | 
|  | # PRNG initialisation, which means that it can't have other tests running before | 
|  | # it does. | 
|  | add_executable(urandom_test ${URANDOM_TEST_SOURCES}) | 
|  | target_link_libraries(urandom_test test_support_lib boringssl_gtest crypto) | 
|  | add_dependencies(boringssl_all_tests urandom_test) | 
|  |  | 
|  | add_executable(crypto_test ${CRYPTO_TEST_SOURCES}) | 
|  | target_link_libraries(crypto_test test_support_lib boringssl_gtest crypto) | 
|  | add_dependencies(boringssl_all_tests crypto_test) | 
|  |  | 
|  | add_executable(ssl_test ${SSL_TEST_SOURCES}) | 
|  | target_link_libraries(ssl_test test_support_lib boringssl_gtest ssl crypto) | 
|  | add_dependencies(boringssl_all_tests ssl_test) | 
|  | add_executable(decrepit_test ${DECREPIT_TEST_SOURCES}) | 
|  | target_link_libraries(decrepit_test test_support_lib boringssl_gtest | 
|  | decrepit ssl crypto) | 
|  | add_dependencies(boringssl_all_tests decrepit_test) | 
|  |  | 
|  | add_executable(pki_test ${PKI_TEST_SOURCES}) | 
|  | target_link_libraries(pki_test test_support_lib boringssl_gtest pki crypto) | 
|  | target_compile_options(pki_test PRIVATE ${PKI_CXX_FLAGS}) | 
|  | add_dependencies(boringssl_all_tests pki_test) | 
|  |  | 
|  | add_executable(test_fips util/fipstools/test_fips.cc) | 
|  | target_link_libraries(test_fips crypto) | 
|  |  | 
|  | add_executable(jitter_deltas util/fipstools/entropy/jitter_deltas.cc) | 
|  | target_link_libraries(jitter_deltas crypto) | 
|  | endif() | 
|  |  | 
|  | if(FIPS) | 
|  | add_executable(modulewrapper ${MODULEWRAPPER_SOURCES}) | 
|  | target_link_libraries(modulewrapper crypto) | 
|  | endif() | 
|  |  | 
|  | add_executable(bssl ${BSSL_SOURCES}) | 
|  | target_link_libraries(bssl ssl crypto) | 
|  |  | 
|  | if(FUZZ) | 
|  | if(LIBFUZZER_FROM_DEPS) | 
|  | file(GLOB LIBFUZZER_SOURCES "util/bot/libFuzzer/*.cpp") | 
|  | add_library(Fuzzer STATIC ${LIBFUZZER_SOURCES}) | 
|  | # libFuzzer does not pass our aggressive warnings. It also must be built | 
|  | # without -fsanitize-coverage options or clang crashes. | 
|  | set_target_properties( | 
|  | Fuzzer PROPERTIES | 
|  | COMPILE_FLAGS "-Wno-shadow -Wno-format-nonliteral -Wno-missing-prototypes -fsanitize-coverage=0" | 
|  | ) | 
|  | endif() | 
|  |  | 
|  | add_subdirectory(fuzz) | 
|  | endif() | 
|  |  | 
|  | if(RUST_BINDINGS) | 
|  | find_program(BINDGEN_EXECUTABLE bindgen) | 
|  | if(NOT BINDGEN_EXECUTABLE) | 
|  | message(FATAL_ERROR "Could not find bindgen but was asked to generate Rust bindings.") | 
|  | else() | 
|  | add_subdirectory(rust) | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(CMAKE_SYSTEM_NAME STREQUAL "Linux") | 
|  | set(HANDSHAKER_ARGS "-handshaker-path" $<TARGET_FILE:handshaker>) | 
|  | endif() | 
|  |  | 
|  | if(BUILD_TESTING) | 
|  | if(FIPS) | 
|  | add_custom_target( | 
|  | acvp_tests | 
|  | COMMAND ${GO_EXECUTABLE} build -o ${CMAKE_CURRENT_BINARY_DIR}/acvptool | 
|  | boringssl.googlesource.com/boringssl.git/util/fipstools/acvp/acvptool | 
|  | COMMAND ${GO_EXECUTABLE} build -o ${CMAKE_CURRENT_BINARY_DIR}/testmodulewrapper | 
|  | boringssl.googlesource.com/boringssl.git/util/fipstools/acvp/acvptool/testmodulewrapper | 
|  | COMMAND cd util/fipstools/acvp/acvptool/test && | 
|  | ${GO_EXECUTABLE} run check_expected.go | 
|  | -tool ${CMAKE_CURRENT_BINARY_DIR}/acvptool | 
|  | -module-wrappers modulewrapper:$<TARGET_FILE:modulewrapper>,testmodulewrapper:${CMAKE_CURRENT_BINARY_DIR}/testmodulewrapper | 
|  | -tests tests.json | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} | 
|  | DEPENDS modulewrapper | 
|  | USES_TERMINAL) | 
|  |  | 
|  | add_custom_target( | 
|  | fips_specific_tests_if_any | 
|  | DEPENDS acvp_tests | 
|  | ) | 
|  | else() | 
|  | add_custom_target(fips_specific_tests_if_any) | 
|  | endif() | 
|  |  | 
|  | file(STRINGS util/go_tests.txt GO_TESTS) | 
|  | set_property(DIRECTORY APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS | 
|  | util/go_tests.txt) | 
|  |  | 
|  | # CMake target names can clash when projects are imported with | 
|  | # add_subdirectory. Only emit the run_tests target if we're the top-level | 
|  | # target. See https://crbug.com/428112180. | 
|  | if(PROJECT_IS_TOP_LEVEL) | 
|  | if(GO_EXECUTABLE) | 
|  | add_custom_target( | 
|  | run_tests | 
|  | COMMAND ${CMAKE_COMMAND} -E echo "Running Go tests" | 
|  | COMMAND ${GO_EXECUTABLE} test ${GO_TESTS} | 
|  | COMMAND ${CMAKE_COMMAND} -E echo | 
|  | COMMAND ${CMAKE_COMMAND} -E echo "Running unit tests" | 
|  | COMMAND ${GO_EXECUTABLE} run util/all_tests.go -build-dir | 
|  | ${CMAKE_CURRENT_BINARY_DIR} | 
|  | COMMAND ${CMAKE_COMMAND} -E echo | 
|  | COMMAND ${CMAKE_COMMAND} -E echo "Running SSL tests" | 
|  | COMMAND cd ssl/test/runner && | 
|  | ${GO_EXECUTABLE} test -shim-path $<TARGET_FILE:bssl_shim> | 
|  | ${HANDSHAKER_ARGS} ${RUNNER_ARGS} | 
|  | WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} | 
|  | DEPENDS boringssl_all_tests bssl_shim handshaker fips_specific_tests_if_any | 
|  | USES_TERMINAL) | 
|  | else() | 
|  | add_custom_target( | 
|  | run_tests | 
|  | COMMAND ${CMAKE_COMMAND} -E echo "Running tests requires Go" | 
|  | COMMAND ${CMAKE_COMMAND} -E false) | 
|  | endif() | 
|  | endif() | 
|  | endif() | 
|  |  | 
|  | if(INSTALL_ENABLED) | 
|  | install(TARGETS crypto ssl EXPORT OpenSSLTargets) | 
|  | install(TARGETS bssl) | 
|  | install(DIRECTORY include/ DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}) | 
|  | install(EXPORT OpenSSLTargets | 
|  | FILE OpenSSLTargets.cmake | 
|  | NAMESPACE OpenSSL:: | 
|  | DESTINATION lib/cmake/OpenSSL) | 
|  | install(FILES cmake/OpenSSLConfig.cmake DESTINATION lib/cmake/OpenSSL) | 
|  | endif() |