| /* |
| * The MIT License (MIT) |
| * |
| * Copyright (c) 2023 Ha Thach (thach@tinyusb.org) for Adafruit Industries |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #ifndef TUSB_CP210X_H |
| #define TUSB_CP210X_H |
| |
| // Protocol details can be found at AN571: CP210x Virtual COM Port Interface |
| // https://www.silabs.com/documents/public/application-notes/AN571.pdf |
| |
| // parts are overtaken from vendors driver |
| // https://www.silabs.com/documents/public/software/cp210x-3.1.0.tar.gz |
| |
| // Config request codes |
| #define CP210X_IFC_ENABLE 0x00 |
| #define CP210X_SET_BAUDDIV 0x01 |
| #define CP210X_GET_BAUDDIV 0x02 |
| #define CP210X_SET_LINE_CTL 0x03 // Set parity, data bits, stop bits |
| #define CP210X_GET_LINE_CTL 0x04 |
| #define CP210X_SET_BREAK 0x05 |
| #define CP210X_IMM_CHAR 0x06 |
| #define CP210X_SET_MHS 0x07 // Set DTR, RTS |
| #define CP210X_GET_MDMSTS 0x08 // Get modem status (DTR, RTS, CTS, DSR, RI, DCD) |
| #define CP210X_SET_XON 0x09 |
| #define CP210X_SET_XOFF 0x0A |
| #define CP210X_SET_EVENTMASK 0x0B |
| #define CP210X_GET_EVENTMASK 0x0C |
| #define CP210X_SET_CHAR 0x0D |
| #define CP210X_GET_CHARS 0x0E |
| #define CP210X_GET_PROPS 0x0F |
| #define CP210X_GET_COMM_STATUS 0x10 |
| #define CP210X_RESET 0x11 |
| #define CP210X_PURGE 0x12 |
| #define CP210X_SET_FLOW 0x13 |
| #define CP210X_GET_FLOW 0x14 |
| #define CP210X_EMBED_EVENTS 0x15 |
| #define CP210X_GET_EVENTSTATE 0x16 |
| #define CP210X_SET_CHARS 0x19 |
| #define CP210X_GET_BAUDRATE 0x1D |
| #define CP210X_SET_BAUDRATE 0x1E |
| #define CP210X_VENDOR_SPECIFIC 0xFF // GPIO, Recipient must be Device |
| |
| // SILABSER_IFC_ENABLE_REQUEST_CODE |
| #define CP210X_UART_ENABLE 0x0001 |
| #define CP210X_UART_DISABLE 0x0000 |
| |
| // SILABSER_SET_BAUDDIV_REQUEST_CODE |
| #define CP210X_BAUD_RATE_GEN_FREQ 0x384000 |
| |
| // SILABSER_SET_LINE_CTL_REQUEST_CODE |
| #define CP210X_BITS_DATA_MASK 0x0f00 |
| #define CP210X_BITS_DATA_5 0x0500 |
| #define CP210X_BITS_DATA_6 0x0600 |
| #define CP210X_BITS_DATA_7 0x0700 |
| #define CP210X_BITS_DATA_8 0x0800 |
| #define CP210X_BITS_DATA_9 0x0900 |
| |
| #define CP210X_BITS_PARITY_MASK 0x00f0 |
| #define CP210X_BITS_PARITY_NONE 0x0000 |
| #define CP210X_BITS_PARITY_ODD 0x0010 |
| #define CP210X_BITS_PARITY_EVEN 0x0020 |
| #define CP210X_BITS_PARITY_MARK 0x0030 |
| #define CP210X_BITS_PARITY_SPACE 0x0040 |
| |
| #define CP210X_BITS_STOP_MASK 0x000f |
| #define CP210X_BITS_STOP_1 0x0000 |
| #define CP210X_BITS_STOP_1_5 0x0001 |
| #define CP210X_BITS_STOP_2 0x0002 |
| |
| // SILABSER_SET_BREAK_REQUEST_CODE |
| #define CP210X_BREAK_ON 0x0001 |
| #define CP210X_BREAK_OFF 0x0000 |
| |
| // SILABSER_SET_MHS_REQUEST_CODE |
| #define CP210X_MCR_DTR 0x0001 |
| #define CP210X_MCR_RTS 0x0002 |
| #define CP210X_MCR_ALL 0x0003 |
| #define CP210X_MSR_CTS 0x0010 |
| #define CP210X_MSR_DSR 0x0020 |
| #define CP210X_MSR_RING 0x0040 |
| #define CP210X_MSR_DCD 0x0080 |
| #define CP210X_MSR_ALL 0x00F0 |
| |
| #define CP210X_CONTROL_WRITE_DTR 0x0100UL |
| #define CP210X_CONTROL_WRITE_RTS 0x0200UL |
| |
| #define CP210X_LSR_BREAK 0x0001 |
| #define CP210X_LSR_FRAMING_ERROR 0x0002 |
| #define CP210X_LSR_HW_OVERRUN 0x0004 |
| #define CP210X_LSR_QUEUE_OVERRUN 0x0008 |
| #define CP210X_LSR_PARITY_ERROR 0x0010 |
| #define CP210X_LSR_ALL 0x001F |
| |
| #endif //TUSB_CP210X_H |
