| { |
| "boards": [ |
| { "board": "adafruit_fruit_jam" }, |
| { "board": "ch32v307v_r1_1v0" }, |
| { "board": "ea4088_quickstart" }, |
| { "board": "ek_tm4c123gxl" }, |
| { "board": "feather_nrf52840_express" }, |
| { "board": "frdm_kl25z" }, |
| { "board": "lpcxpresso11u68" }, |
| { "board": "lpcxpresso55s28" }, |
| { "board": "max32666fthr" }, |
| { "board": "metro_m0_express" }, |
| { "board": "metro_m4_express" }, |
| { "board": "mimxrt1064_evk" }, |
| { "board": "msp_exp430f5529lp" }, |
| { "board": "nanoch32v203" }, |
| { "board": "ra6m5_ek" }, |
| { "board": "raspberry_pi_pico" }, |
| { "board": "raspberry_pi_pico2" }, |
| { "board": "same70_xplained" }, |
| { "board": "samg55_xplained" }, |
| { "board": "stm32f407disco" }, |
| { "board": "stm32g0b1nucleo" }, |
| { "board": "stm32h743eval" }, |
| { "board": "stm32l412nucleo" } |
| ], |
| "uncovered": { |
| "dcd_cxd56": "spresense unpinned - no board on either HIL roster and no other CI board carries dcd_cxd56; build-only size tracking with no hardware behind it", |
| "dcd_da146xx": "da1469x_dk_pro unpinned - no board on either HIL roster and no other CI board carries dcd_da146xx; build-only size tracking with no hardware behind it", |
| "dcd_eptri": "fomu unpinned - no board on either HIL roster and no other CI board carries dcd_eptri; build-only size tracking with no hardware behind it", |
| "dcd_ft9xx": "mm900evxb unpinned - no board on either HIL roster and no other CI board carries dcd_ft9xx; build-only size tracking with no hardware behind it", |
| "dcd_mm32f327x_otg": "mm32 unpinned - maintainer trimmed the pinned set", |
| "dcd_nuc120": "nuvoton unpinned - maintainer trimmed the pinned set", |
| "dcd_nuc121": "nuvoton unpinned - maintainer trimmed the pinned set", |
| "dcd_nuc505": "nuvoton unpinned - maintainer trimmed the pinned set", |
| "dcd_pic": "pic32mx has no BSP family in hw/bsp; XC toolchain not in CI", |
| "dcd_pic32mz": "hw/bsp/pic32mz is make-only (no family.cmake); CI membrowse lane is cmake", |
| "dcd_pio_usb": "PIO-USB device role needs Pico-PIO-USB lib config no CI board enables by default", |
| "dcd_sunxi_musb": "f1c100s unpinned - maintainer trimmed the pinned set", |
| "hcd_lpc_ip3516": "no pinned board builds it: lpc55 defaults RHPORT_HOST=0 (ohci); needs a build variant", |
| "hcd_max3421": "feather_rp2040_max3421 unpinned - needs a board with MAX3421_HOST=1", |
| "hcd_musb": "msp432e4 unpinned - no host-role musb board in the pinned set" |
| } |
| } |