| ********* |
| Changelog |
| ********* |
| |
| 0.18.0 |
| ====== |
| |
| General |
| ------- |
| |
| - New MCUs: |
| |
| - Add esp32p4 OTG highspeed support |
| - Add stm32 u0, c0, h7rs |
| |
| - Better support dcache, make sure all usb-transferred buffer are cache line aligned and occupy full cache line |
| - Build ARM IAR with CircleCI |
| - Improve HIL with dual/host_info_to_device_cdc optional for pico/pico2, enable dwc2 dma test |
| |
| API Changes |
| ----------- |
| |
| - Change signature of ``tusb_init(rhport, tusb_rhport_init_t*)``, tusb_init(void) is now deprecated but still available for backward compatibility |
| - Add new ``tusb_int_handler(rhport, in_isr)`` |
| - Add time-related APIs: ``tusb_time_millis_api()`` and ``tusb_time_delay_ms_api()`` for non-RTOS, required for some ports/configuration |
| - New configuration macros: |
| |
| - ``CFG_TUD/TUH_MEM_DCACHE_ENABLE`` enable data cache sync for endpoint buffer |
| - ``CFG_TUD/TUH_MEM_DCACHE_LINE_SIZE`` set cache line size |
| - ``CFG_TUD/TUH_DWC2_SLAVE_ENABLE`` enable dwc2 slave mode |
| - ``CFG_TUD/TUH_DWC2_DMA_ENABLE`` enable dwc2 dma mode |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - DWC2 |
| - Add DMA support for both device and host controller |
| - Add host driver support including: full/high speed, control/bulk/interrupt (CBI) transfer, split CBI i.e FS/LS attached via highspeed hub, hub support |
| |
| - RP2: implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() for isochronous endpoint |
| - iMXRT1170 support M4 core |
| |
| Device Stack |
| ------------ |
| |
| - Vendor Fix class reset |
| - NCM fix recursions in tud_network_recv_renew() |
| - Audio fix align issue of _audiod_fct.alt_setting |
| - UVC support format frame based |
| - Change dcd_dcache_() return type from void to bool |
| - HID add Usage Table for Physical Input Device Page (0x0F) |
| |
| Host Stack |
| ---------- |
| |
| - Fix an duplicated attach issue which cause USBH Defer Attach until current enumeration complete message |
| |
| 0.17.0 |
| ====== |
| |
| General |
| ------- |
| |
| - Improved CI: build both cmake and make. Make use of CircleCI for part of build process to speed up CI |
| - Add CodeQL Workflow for Code Security Analysis |
| - Add Clang compiler support |
| - Add default implementation for weak callbacks functions for better Keil compatibility |
| - Upgrade hardware-in-the-loop (HIL) testing with more boards and examples: including dual stack example |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - Chipidea |
| |
| - Support MCXA |
| |
| - DWC2 |
| |
| - Fix tickless issue with stm32f7: disable ULPI clock during sleep when using internal phy |
| - Fix SOF interrupt handling |
| - Fix fifo level half/empty issue |
| - Add DWC2 Test Mode support. |
| - for esp32 force disconnect/connect using USB_WRAP otg pad override |
| |
| - FSDEV |
| |
| - Rewrite and Generalize driver to support non-stm32 mcu such as wch |
| - Simplify PMA, HW FIFO access and bit manipulation for different access scheme 1x16, 2x16 and 32 bit |
| - Add support for ch32 usbd e.g ch32v203 |
| - Add support for STM32G4 and STM32U5 microcontrollers. |
| - Fix h5 (32-bit) errata 2.15.1: Buffer description table update completes after CTR interrupt triggers |
| - ISO EP buffer allocation improvements, implement dcd_edpt_close_all() |
| |
| - Fix ch32v203 race condition and stability issue with |
| |
| - fix ch32v203 seems to unconditionally accept ZLP on EP0 OUT. |
| - fix v203 race condition between rx bufsize and RX_STAT which cause PMAOVR, occurs with WRITE10 |
| - correctly handle setup prepare at dcd_edpt0_status_complete(), which fixes the race condition with windows where we could miss setup packet (setup bit set, but count = 0) |
| |
| - MAX3421E |
| |
| - Add support for rp2040, esp32 (c3, c6, h2, etc..) |
| - Add hcd_deinit() for max3421 |
| - Retry NAK handling next frame to reduce CPU and SPI bus usage |
| - add cpuctl and pinctl to tuh_configure() option for max3421 |
| - Implement hcd abort transfer for Max3421 |
| - Properly Handle NAK Response in MAX3421E driver: correctly switch and skip writing to 2 FIFOs when NAK received. Otherwise, the driver may hang in certain conditions. |
| |
| - MSP430: support non-bus-powered |
| |
| - MUSB |
| |
| - Add support for Analoog devices: max32650, max32666, max32690, max3278002 |
| |
| - nRF |
| |
| - Fix dcd_edpt_open for iso endpoint |
| - Handle ISOOUT CRC errors |
| - Add compile support with old nordic sdk |
| - Fix a few race conditions |
| |
| - OHCI |
| |
| - Allow more than 16 devices |
| |
| - RP2040 |
| |
| - Correctly abort control transfer when new setup arrived. Due to RP2040-E2 only able to fix B2 or later |
| - Implement hcd abort transfer for rp2040 |
| - Add support for rp2350 |
| |
| - RUSB2 |
| |
| - Support ra2a1 pipe number scheme |
| |
| - WCH CH32 |
| |
| - Added support for USB OTG/FS and FSDev Driver. Update CH32V307 to allow manual select FS or HS driver. |
| - Fixed various bugs in CH32v307 usbhs driver: endpoint handling and data transfer management. |
| |
| Device Stack |
| ------------ |
| |
| - Add tud_deinit() and class driver deinit() to deinitialize TinyUSB device stack. |
| - Add support for generic SOF callback. |
| - Add set address recovery time 2ms per USB spec. |
| |
| - Audio |
| |
| - Add audio_test_freertos & audio_4_channel_mic_freertos |
| - Improved support for Audio Class 2.0 (UAC2) with various bug fixes. |
| - Add feedback by fifo counting. |
| |
| - Bluetooth HCI |
| |
| - Issue ZLP on ACL IN ep when transfer is multiple of endpoint max packet size |
| |
| - CDC |
| |
| - Add tud_cdc_configure_fifo() to make RX/TX buffer persistent (not clear when disconnected) |
| - Add missing capability bit for CDC ACM serial break support |
| - Enhanced CDC class with better handling of large data transmissions. |
| - Add missing capability bit for CDC ACM serial break support |
| |
| - HID |
| |
| - Added missing key codes for keypad |
| - Added HID Lighting and Illumination functionality |
| - Fixed issues in the HID class for more reliable device enumeration. |
| - Support HID Mouse with absolute positioning |
| - Use separate buffer for control SET_REPORT, fix conflict with interrupt endpoint out |
| |
| - MSC: Added support for SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL |
| |
| - Net |
| |
| - Rewrite of NCM device driver to improve throughput |
| - removed obsolete tud_network_link_state_cb() |
| |
| - USBTMC Added notification support |
| |
| - Vendor |
| |
| - Migrate to new endpoint stream API, support non-buffered TX/RX |
| - Add ZLP for write() when needed |
| |
| - Video |
| |
| - Enhance UVC descriptors and example |
| - Video Added support for USB Video Class (UVC) with MJPEG. |
| - Fix multiple interfaces, add an example of 2ch video capture. |
| - Fix race for tud_video_n_streaming check |
| |
| Host Stack |
| ---------- |
| |
| - Added tuh_deinit() to de-initialize TinyUSB host stack. |
| - Added support for new USB mass storage class APIs. |
| - Improved error handling and retry mechanisms for unstable devices. |
| |
| - CDC Serial |
| |
| - Add support for ch34x |
| - Allow to overwrite CFG_TUH_CDC_FTDI/CP210X/CH32X_VID_PID_LIST |
| - Enhanced stability of CDC-ACM devices during enumeration. |
| |
| - HID |
| |
| - Add tuh_hid_receive_abort() |
| - Add tuh_hid_get_report() |
| |
| - Hub |
| |
| - Prevent status request to invalid ep_num |
| - Fix double status xfer |
| - unroll hub removal |
| |
| 0.16.0 |
| ====== |
| |
| - New controller driver: MAX3421e (usb host shield), rusb2 (Renesas USB2.0), ChipIdea fullspeed |
| - New MCUs: MCXn9, nRF5340, STM32: G0, G4, L5, U575, U5A5, RA6m5, CH32F20x |
| - Add initial TypeC PowerDelivery support with STM32G4 |
| - Remove submodules and use python script to manage repo dependencies #1947 |
| - Add CMake support for most families and boards, move build file from tools/ to examples/build_system |
| - Add ETM trace support with JTrace for nrf52840, nrf5340, mcb1857, stm32h743eval, ra6m5 |
| - [osal] Make it possible to override the osal_task_delay() in osal_none |
| - Add CDC+UAC2 composite device example |
| - Enhance Hardware-in-the-loop (HIL) testing with more boards: rp2040, stm32l412nucleo, stm32f746disco, lpcxpresso43s67 |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - Add new ISO endpoint API: dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() |
| - Remove legacy driver st/synopsys |
| |
| - EHCI |
| |
| - [iMXRT] Add dache clean/invalidate when memory is in cacheable memory |
| - Fix portsc write issue which cause problem with enumeration |
| - Fix an issue when doing port reset write to portsc |
| - Fix port change detect is not recognized when power on with attached device |
| - Fix xfer failed with disconnected device as stalled |
| - Fix error on EHCI causes xfer error in non-queued qhd which cause memory fault |
| - Un-roll recursive hub removal with usbh queue |
| - Fix issue when removing queue head |
| - Implement hcd_edpt_abort_xfer() |
| - use standard USB complete interrupt instead of custom chipidea async/period interrupt to be more compatible with other ehci implementation |
| - refactor usb complete & error isr processing, merge, update. Fix EHCI QHD reuses QTD on wrong endpoint |
| - Improve bus reset, fix send_setup() not carried out if halted previously |
| - Fix clear qhd halted bit if not caused by STALL protocol to allow for next transfer |
| |
| - ChipIdea Highspeed |
| |
| - Fix control transfer issue when previous status and new setup complete in the same isr frame |
| - [imxrt] Add dcache support for cache region |
| |
| - ChipIdea Fullspeed |
| |
| - Generalize ChipIdea Fullspeed driver for mcxn9 (port 0), kinetis |
| |
| - nrf |
| |
| - Fix DMA race condition with ISO OUT transfer #1946 |
| - Add support for nRF5340 with pca10095 board |
| |
| - Renesas rusb2 |
| |
| - Generalize rusb2 driver for ra, rx mcus |
| - rework both dcd and hcd for better multiple ports support |
| - Add support for board with HS USB port: ra6m5 port1 |
| |
| - rp2040 |
| |
| - [dcd] Make writes to SIE_CTRL aware of concurrent access |
| - [hcd] add hcd_frame_number(), hcd_edpt_abort_xfer() for pio-usb host |
| |
| - stm32 fsdev: |
| |
| - Add STM32L5 support |
| - Implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() |
| |
| - OHCI |
| |
| - Allows configurable root hub ports, handles SMM mode (Ref OHCI spec 5.1.1.3.3) and Bios mode (Ref OHCI spec 5.1.1.3.4) |
| - Fix FrameIntervalToggle must be toggled after we write the FrameInterval (Ref OHCI Spec 7.3.1) |
| - Wait PowerOnToPowerGoodTime after we enable power of the RH ports (Ref OHCI Spec 7.4.1) |
| - Generate port interrupts for devices already connected during init. |
| - Fix issue when removing queue head |
| - Disable MIE during IRQ processing and clear HccaDoneHead on completion as per OCHI Spec Page 80 |
| |
| Device Stack |
| ------------ |
| |
| - Add optional hooks tud_event_hook_cb() |
| - Audio (UAC2) |
| |
| - Fix feedback EP buffer alignment. |
| - Fix encoding, update example |
| - Improve IN transfer |
| |
| - Bluetooth |
| |
| - Add historical EP compatibility for Bluetooth HCI |
| |
| - CDC |
| |
| - Fix line_coding alignment |
| - Fix typo in cdc line coding enum |
| |
| - MIDI |
| |
| - Fix stream_write() always writes system messages to cable 0 |
| - Fix incorrect NOTE_ON, NOTE_OFF definitions |
| |
| - USBTMC: Fix tmc488 bit order |
| |
| - Vendor: fix read()/write() race condition |
| |
| - Video (UVC) |
| |
| - Add the capability for video class to handle a bulk endpoint in the streaming interface. |
| |
| Host Stack |
| ---------- |
| |
| - USBH |
| |
| - Add new APIs: tuh_interface_set(), tuh_task_event_ready(), tuh_edpt_abort_xfer(), tuh_rhport_reset_bus(), tuh_rhport_is_active() |
| - Fix issue when device generate multiple attach/detach/attach when plugging in |
| - Prefer application callback over built-in driver on transfer complete event |
| - Correct hcd_edpt_clear_stall() API signature |
| - Separate bus reset delay and contact debouncing delay in enumeration |
| - Support usbh_app_driver_get_cb() for application drivers |
| - Fix usbh enumeration removal race condition |
| - Add optional hooks tuh_event_hook_cb() |
| |
| - CDC |
| |
| - Breaking: change tuh_cdc_itf_get_info() to use tuh_itf_info_t instead of tuh_cdc_info_t |
| - Fix cdc host enumeration issue when device does not support line request |
| - Add support for vendor usb2uart serial: ftdi, cp210x, ch9102f |
| - Improve sync control API e.g tuh_cdc_set_control_line_state(), tuh_cdc_set_line_coding() |
| |
| - HID |
| |
| - Add new APIs tuh_hid_send_report(), tuh_hid_itf_get_info(), tuh_hid_receive_ready(), tuh_hid_send_ready(), tuh_hid_set_default_protocol() |
| - Change meaning of CFG_TUH_HID to total number of HID interfaces supported. Previously CFG_TUH_HID is max number of interfaces per device which is rather limited and consume more resources than needed. |
| |
| - HUB |
| |
| - Fix handling of empty "status change" interrupt |
| - Fix issue with hub status_change is not aligned |
| |
| - MSC |
| |
| - Fix bug in tuh_msc_ready() |
| - Fix host msc get maxlun not using aligned section memory |
| |
| 0.15.0 |
| ====== |
| |
| - Add codespell to detect typo |
| - Add support for fuzzing and bagde for oss-fuzz |
| - [osal] |
| |
| - Allow the use of non-static allocation for FreeRTOS |
| - Fix FreeRTOS wrong task switch in some cases |
| |
| - Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths) |
| - Better support for IAR (ARM) with ci build check for stm32 mcus. |
| - Fix Windows build for some mingw gnu make situations |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - Add new port support (WIP) for WCH CH32V307 USB Highspeed |
| - Add new port support (WIP) for PIC32MM/MX & PIC24 |
| |
| - [nRF] |
| |
| - Fix endpoint internal state when closed |
| - Fix reception of large ISO packets |
| |
| - [rp2040] |
| |
| - [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80% |
| - [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times |
| - [hcd] Support host bulk endpoint using hw "interrupt" endpoint. Note speed limit is 64KB/s |
| |
| - [samd][dcd] Add support for ISO endpoint |
| - [dwc2][dcd] Add support for stm32u5xx |
| - [esp32sx] Fix Isochronous transfers only transmitted on even frame |
| - [lpc_ip3511][dcd] Add isochronous support and fix endpoint accidental write |
| - [ft90x] Improve and enhance support for FT9xx MCU, tested with more examples |
| |
| Device Stack |
| ------------ |
| |
| - [Video] |
| |
| - Add support for MJPEG |
| - Fix probe on macOS |
| |
| - [MIDI] |
| |
| - Support port name strings |
| - fix MS Header wTotalLength computation |
| |
| - [HID] |
| |
| - Add FIDO descriptor template |
| - change length in tud_hid_report_complete_cb() from uint8 to uint16 |
| |
| - [CDC] |
| |
| - Fix autoflush for FIFO < MPS |
| - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data |
| |
| - [USBTMC] Fix packet size with highspeed |
| |
| Host Stack |
| ---------- |
| |
| - Retry a few times with transfers in enumeration since device can be unstable when starting up |
| - [MSC] Rework host masstorage API. Add new **host/msc_file_explorer** example |
| - [CDC] |
| |
| - Add support for host cdc |
| - Fix host cdc with device without IAD e.g Arduino Due |
| |
| 0.14.0 |
| ====== |
| |
| - Improve compiler support for CCRX and IAR |
| - Add timeout to osal_queue_receive() |
| - Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task() |
| - Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion |
| - Add new examples |
| |
| - host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer |
| - dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller. |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - Enhance rhports management to better support dual roles |
| |
| - CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE |
| - tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void) |
| - Add dcd/hcd port specific defines `TUP_` (stand for tinyusb port-specific) |
| - [dwc2] |
| |
| - Update to support stm32 h72x, h73x with only 1 otg controller |
| - Fix overwrite with grstctl when disable endpoint |
| - [EHCI] Fix an issue with EHCI driver |
| - [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0 |
| - [nrf5x] Fix DMA access race condition using atomic function |
| - [pic32] Fix PIC32 santiy |
| - [rp2040] |
| |
| - Add PICO-PIO-USB as controller (device/host) support for rp2040 |
| - Use shared IRQ handlers, so user can also hook the USB IRQ |
| - Fix resumed signal not reported to device stack |
| - [stm32fsdev] Add support for stm32wb55 |
| |
| Device Stack |
| ------------ |
| |
| - [Audio] Add support for feedback endpoint computation |
| |
| - New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr(). |
| - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported. |
| - Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR |
| - Fix typo in audiod_rx_done_cb() |
| |
| - [DFU] Fix coexistence with other interfaces BTH, RNDIS |
| - [MSC] Fix inquiry response additional length field |
| - [Venndor] Improve write performance |
| |
| Host Stack |
| ---------- |
| |
| - Add new API tuh_configure(rhport, cfg_id, cfg_param) for dynamnic port specific behavior configuration |
| - [HID] Open OUT endpoint if available |
| - [Hub] hub clear port and device interrupts |
| - [USBH] Major improvement |
| |
| - Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time. |
| - Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require `CFG_TUH_API_EDPT_XFER=1` |
| - Support app-level enumeration with new APIs |
| |
| - tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report() |
| - tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string() |
| - Also add _sync() as sync/blocking version for above APIs |
| |
| 0.13.0 |
| ====== |
| |
| - [tu_fifo] Fix locked mutex when full, and return type in peek_n() |
| |
| Controller Driver (DCD & HCD) |
| ----------------------------- |
| |
| - [DWC2] Generalize synopsys dwc2 with synopsys/dwc2 which support both FS and HS phy (UTMI and ULPI) for various MCUs. |
| - Broadcom 28/27xx on raspberrypi SBC |
| - Silicon Labs EFM32 |
| - Espressif ESP32 Sx |
| - GigaDevice GD32 |
| - ST STM32 |
| - Infineon XMC |
| - [KL25] Add new HCD for NXP KL25 |
| - [MUSB] Add new DCD and HCD for Mentor musb with TI MSP432E4 |
| - [F1C100s] Add new DCD for Allwinner F1C100s family |
| - [PIC32MZ] Add new DCD for PIC32MZ |
| - [nRF] Fix/Enhance various race condition with: EASY DMA, request HFXO, EPOUT |
| - [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed, |
| - [RP2040] various update/fix for hcd/dcd |
| - [FT9XX] new DCD port for Bridgetek FT90x and FT93x devices |
| - [DA1469X] Fix resume |
| - [OHCI] Fix device array out of bound |
| |
| Note: legacy drivers such as st/synopsys, nxp/transdimension are still present in this release but won't receive more update and could be removed in the future. |
| |
| Device Stack |
| ------------ |
| |
| - [Audio] Support disabling feedback format correction (16.16 <-> 10.14 format) |
| - [MSC] Add tud_msc_request_sense_cb() callback, change most default sense error to medium not present (0x02, 0x3A, 0x00) |
| - [Video] Fix video_capture example fails enumeration when 8FPS |
| |
| Host Stack |
| ---------- |
| |
| No notable changes |
| |
| 0.12.0 |
| ====== |
| |
| - add CFG_TUSB_OS_INC_PATH for os include path |
| |
| Device Controller Driver (DCD) |
| ------------------------------ |
| |
| - Getting device stack to pass USB Compliance Verification test (chapter9, HID, MSC). Ports are tested: |
| nRF, SAMD 21/51, rp2040, stm32f4, Renesas RX, iMXRT, ESP32-S2/3, Kinetic KL25/32, DA146xx |
| - Added dcd_edpt_close_all() for switching configuration |
| - [Transdimension] Support dcd_edpt_xfer_fifo() with auto wrap over if fifo buffer is 4K aligned and size is multiple of 4K. |
| - [DA146xx] Improve vbus, reset, suspend, resume detection, and remote wakeup. |
| |
| Device Stack |
| ------------ |
| |
| - Add new network driver Network Control Model (CDC-NCM), update net_lwip_webserver to work with NCM (need re-configure example) |
| - Add new USB Video Class UVC 1.5 driver and video_capture example ((work in progress) |
| - Fix potential buffer overflow for HID, bluetooth drivers |
| |
| Host Controller Driver (HCD) |
| ---------------------------- |
| |
| No notable changes |
| |
| Host Stack |
| ---------- |
| |
| No notable changes |
| |
| 0.11.0 (2021-08-29) |
| =================== |
| |
| - Add host/hid_controller example: only worked/tested with Sony PS4 DualShock controller |
| - Add device/hid_boot_interface example |
| - Add support for Renesas CCRX toolchain for RX mcu |
| |
| Device Controller Driver (DCD) |
| ------------------------------ |
| |
| - Add new DCD port for SAMx7x (E70, S70, V70, V71) |
| - Add new mcu K32L2Bxx |
| - Add new mcu GD32VF103 |
| - Add new mcu STM32l151 |
| - Add new mcu SAML21 |
| - Add new mcu RX65n RX72n |
| - Fix NUC120/121/126 USBRAM can only be accessed in byte manner. Also improve set_address & disable sof |
| - Add Suspend/Resume handling for Renesas RX family. |
| - Fix DA1469x no VBUS startup |
| |
| Synopsys |
| ^^^^^^^^ |
| |
| - Fix Synopsys set address bug which could cause re-enumeration failed |
| - Fix dcd_synopsys driver integer overflow in HS mode (issue #968) |
| |
| nRF5x |
| ^^^^^ |
| |
| - Add nRF5x suspend, resume and remote wakeup |
| - Fix nRF5x race condition with TASKS_EP0RCVOUT |
| |
| RP2040 |
| ^^^^^^ |
| |
| - Add RP2040 suspend & resume support |
| - Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet |
| |
| Device Stack |
| ------------ |
| |
| USBD |
| ^^^^ |
| |
| - Better support big endian mcu |
| - Add tuh_inited() and tud_inited(), will separate tusb_init/inited() to tud/tuh init/inited |
| - Add dcd_attr.h for defining common controller attribute such as max endpoints |
| |
| Bluetooth |
| ^^^^^^^^^ |
| |
| - Fix stridx error in descriptor template |
| |
| DFU |
| ^^^ |
| |
| - Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout |
| - Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU |
| |
| HID |
| ^^^ |
| |
| - Fix newline usage keyboard (ENTER 0x28) |
| - Better support Hid Get/Set report |
| - Change max gamepad support from 16 to 32 buttons |
| |
| MIDI |
| ^^^^ |
| |
| - Fix midi available |
| - Fix midi data |
| - Fix an issue when calling midi API when not enumerated yet |
| |
| UAC2 |
| ^^^^ |
| |
| - Fix bug and enhance of UAC2 |
| |
| Vendor |
| ^^^^^^ |
| |
| - Fix vendor fifo deadlock in certain case |
| - Add tud_vendor_n_read_flush |
| |
| Host Controller Driver (HCD) |
| ---------------------------- |
| |
| RP2040 |
| ^^^^^^ |
| |
| - Implement double buffered to fix E4 errata and boost performance |
| - Lots of rp2040 update and enhancement |
| |
| Host Stack |
| ---------- |
| |
| - Major update and rework most of host stack, still needs more improvement |
| - Lots of improvement and update in parsing configuration and control |
| - Rework and major update to HID driver. Will default to enable boot interface if available |
| - Separate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB for better management and reduce SRAM usage |
| |
| 0.10.1 (2021-06-03) |
| =================== |
| |
| - rework rp2040 examples and CMake build, allow better integration with pico-sdk |
| |
| Host Controller Driver (HCD) |
| ---------------------------- |
| |
| - Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes |
| - Improve hub driver |
| - Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer() |
| - Use hcd_frame_number() instead of micro frame |
| - Fix OHCI endpoint address and xferred_bytes in xfer complete event |
| |
| 0.10.0 (2021-05-28) |
| =================== |
| |
| - Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode |
| - Improve audio_test example and add audio_4_channel_mic example |
| - Add new dfu example |
| - Remove pico-sdk from submodule |
| |
| Device Controller Driver (DCD) |
| ------------------------------ |
| |
| - Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A) |
| - Add new DCD port Renesas RX63N, board GR-CITRUS |
| - Add new (optional) endpoint API dcd_edpt_xfer_fifo |
| - Fix build with nRF5340 |
| - Fix build with lpc15 and lpc54 |
| - Fix build with lpc177x_8x |
| - STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API |
| - Support LPC55 port1 highspeed |
| - Add support for Espressif esp32s3 |
| - nRF: fix race condition that could cause drop packet of Bulk OUT transfer |
| |
| USB Device Driver (USBD) |
| ------------------------ |
| |
| - Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo |
| |
| Device Class Driver |
| ------------------- |
| |
| CDC |
| |
| - [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter. |
| |
| DFU |
| |
| - Add new DFU 1.1 class driver (WIP) |
| |
| HID |
| |
| - Fix keyboard report descriptor template |
| - Add more hid keys constant from 0x6B to 0xA4 |
| |
| - [Breaking] rename API |
| - HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE |
| - tud_hid_boot_mode() to tud_hid_get_protocol() |
| - tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb() |
| |
| MIDI |
| |
| - Fix MIDI buffer overflow issue |
| |
| - [Breaking] rename API |
| - Rename tud_midi_read() to tud_midi_stream_read() |
| - Rename tud_midi_write() to tud_midi_stream_write() |
| - Rename tud_midi_receive() to tud_midi_packet_read() |
| - Rename tud_midi_send() to tud_midi_packet_write() |
| |
| Host Controller Driver (HCD) |
| ---------------------------- |
| |
| - No noticeable changes |
| |
| USB Host Driver (USBH) |
| ---------------------- |
| |
| - No noticeable changes |
| |
| Host Class Driver |
| ----------------- |
| |
| - HID: Rework host hid driver, basically everything changes |
| |
| |
| 0.9.0 (2021-03-12) |
| ================== |
| |
| Device Stack |
| ------------ |
| |
| Device Controller Driver (DCD) |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| RP2040 |
| |
| - Fix endpoint buffer reallocation overrun problem |
| - Fix osal_pico queue overflow in initialization |
| - Fix Isochronous endpoint buffer size in transfer |
| - Optimize hardware endpoint struct to reduce RAM usage |
| - Fix enum walkaround forever check for SE0 when pull up is disabled |
| |
| Sony CXD56 |
| |
| - Pass the correct speed on Spresense |
| - Fix setup processed flag |
| |
| NXP Transdimention |
| |
| - Update dcd_init() to reset controller to device mode |
| |
| USB Device Driver (USBD) |
| ^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| - Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint. |
| - Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64 |
| - Ack SET_INTERFACE even if it is not implemented by class driver. |
| |
| Device Class Driver |
| ^^^^^^^^^^^^^^^^^^^ |
| |
| DFU Runtime |
| |
| - rename dfu_rt to dfu_runtime for easy reading |
| |
| CDC |
| |
| - Add tud_cdc_send_break_cb() to support break request |
| - Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo |
| |
| HID |
| |
| - [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes |
| |
| - tud_hid_descriptor_report_cb() |
| - tud_hid_get_report_cb() |
| - tud_hid_set_report_cb() |
| - tud_hid_boot_mode_cb() |
| - tud_hid_set_idle_cb() |
| |
| - Add report complete callback tud_hid_report_complete_cb() API |
| - Add DPad/Hat support for HID Gamepad |
| |
| - `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad |
| - Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum |
| - Add Gamepad to hid_composite / hid_composite_freertos example |
| |
| MIDI |
| |
| - Fix dropping MIDI sysex message when fifo is full |
| - Fix typo in tud_midi_write24(), make example less ambiguous for cable and channel |
| - Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7) |
| |
| Host Stack |
| ---------- |
| |
| Host Controller Driver (HCD) |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| - Add rhport to hcd_init() |
| - Improve EHCI/OHCI driver abstraction |
| |
| - Move echi/ohci files to portable/ |
| - Rename hcd_lpc18_43 to hcd_transdimension |
| - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr() |
| |
| - Update NXP transdimention hcd_init() to reset controller to host mode |
| |
| - Ported hcd to rt10xx |
| |
| USB Host Driver (USBH) |
| ^^^^^^^^^^^^^^^^^^^^^^ |
| |
| - No noticeable changes to usbh |
| |
| Host Class Driver |
| ^^^^^^^^^^^^^^^^^ |
| |
| MSC |
| |
| - Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry() |
| - Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming |
| - Change tuh_msc_is_busy() to tuh_msc_ready() |
| - Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10() |
| - Read_Capacity is invoked as part of enumeration process |
| - Add tuh_msc_get_block_count(), tuh_msc_get_block_size() |
| - Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities |
| |
| Others |
| ------ |
| |
| - Add basic support for rt-thread OS |
| - Change zero bitfield length to more explicit padding |
| - Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers |
| - Update pico-sdk to v1.1.0 |
| |
| **New Boards** |
| |
| - Microchip SAM E54 Xplained Pro |
| - LPCXpresso 55s28 |
| - LPCXpresso 18s37 |
| |
| |
| 0.8.0 (2021-02-05) |
| ================== |
| |
| Device Controller Driver |
| ------------------------ |
| |
| - Added new device support for Raspberry Pi RP2040 |
| - Added new device support for NXP Kinetis KL25ZXX |
| - Use dcd_event_bus_reset() with link speed to replace bus_signal |
| |
| - ESP32-S2: |
| - Add bus suspend and wakeup support |
| |
| - SAMD21: |
| - Fix (walkaround) samd21 setup_packet overflow by USB DMA |
| |
| - STM32 Synopsys: |
| - Rework USB FIFO allocation scheme and allow RX FIFO size reduction |
| |
| - Sony CXD56 |
| - Update Update Spresense SDK to 2.0.2 |
| - Fix dcd issues with setup packets |
| - Correct EP number for cdc_msc example |
| |
| USB Device |
| ---------- |
| |
| **USBD** |
| |
| - Rework usbd control transfer to have additional stage parameter for setup, data, status |
| - Fix tusb_init() return true instead of TUSB_ERROR_NONE |
| - Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet |
| |
| **Class Driver** |
| |
| - CDC |
| - Allow to transmit data, even if the host does not support control line states i.e set DTR |
| |
| - HID |
| - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64 |
| |
| - MIDI |
| - Fix midi sysex sending bug |
| |
| - MSC |
| - Invoke only scsi complete callback after status transaction is complete. |
| - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error. |
| |
| - USBTMC |
| - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu |
| |
| **Example** |
| |
| - Support make from windows cmd.exe |
| - Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples |
| |
| |
| USB Host |
| -------- |
| |
| No noticeable changes to host stack |
| |
| New Boards |
| ---------- |
| |
| - NXP/Freescale Freedom FRDM-KL25Z |
| - Feather Double M33 express |
| - Raspberry Pi Pico |
| - Adafruit Feather RP2040 |
| - Adafruit Itsy Bitsy RP2040 |
| - Adafruit QT RP2040 |
| - Adfruit Feather ESP32-S2 |
| - Adafruit Magtag 29" Eink |
| - Adafruit Metro ESP32-S2 |
| - Adafruit PyBadge |
| - Adafruit PyPortal |
| - Great Scott Gadgets' LUNA D11 & D21 |
| |
| |
| 0.7.0 (2020-11-08) |
| ================== |
| |
| Device Controller Driver |
| ------------------------ |
| |
| - Added new support for Espressif ESP32-S2 |
| - Added new support for Dialog DA1469x |
| - Enhance STM32 Synopsys |
| |
| - Support bus events disconnection/suspend/resume/wakeup |
| - Improve transfer performance with optimizing xfer and fifo size |
| - Support Highspeed port (OTG_HS) with both internal and external PHY |
| - Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY) |
| - Add ISO transfer, fix odd/even frame |
| - Fix FIFO flush during stall |
| - Implement dcd_edpt_close() API |
| - Support F105, F107 |
| |
| - Enhance STM32 fsdev |
| - Improve dcd fifo allocation |
| - Fix ISTR race condition |
| - Support remap USB IRQ on supported MCUs |
| - Implement dcd_edpt_close() API |
| |
| - Enhance NUC 505: enhance set configure behavior |
| |
| - Enhance SAMD |
| - Fix race condition with setup packet |
| - Add SAMD11 option `OPT_MCU_SAMD11` |
| - Add SAME5x option `OPT_MCU_SAME5X` |
| |
| - Fix SAMG control data toggle and stall race condition |
| |
| - Enhance nRF |
| - Fix hanged when tud_task() is called within critical section (disabled interrupt) |
| - Fix disconnect bus event not submitted |
| - Implement ISO transfer and dcd_edpt_close() |
| |
| |
| USB Device |
| ---------- |
| |
| **USBD** |
| |
| - Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with. |
| - Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()` |
| - Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE |
| - Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API. |
| - Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs. |
| - Add `usbd_edpt_open()` |
| - Remove `dcd_set_config()` |
| - Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation |
| - Support SET_INTERFACE, GET_INTERFACE request |
| - Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook |
| - Add IAR compiler support |
| - Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument |
| - Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()` |
| |
| - Enhance class driver management |
| - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver |
| - Add application implemented class driver via `usbd_app_driver_get_cb()` |
| - IAD is handled to assign driver id |
| |
| - Added `tud_descriptor_device_qualifier_cb()` callback |
| - Optimize `tu_fifo` bulk write/read transfer |
| - Forward non-std control request to class driver |
| - Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string) |
| - Fix OSAL FreeRTOS yield from ISR |
| |
| **Class Drivers** |
| |
| - USBNET: remove ACM-EEM due to lack of support from host |
| - USBTMC: fix descriptors when INT EP is disabled |
| |
| - CDC: |
| - Send zero length packet for end of data when needed |
| - Add `tud_cdc_tx_complete_cb()` callback |
| - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo |
| |
| - MIDI: |
| - Add packet interface |
| - Add multiple jack descriptors |
| - Fix MIDI driver for sysex |
| |
| - DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request |
| |
| - Rename some configure macro to make it clear that those are used directly for endpoint transfer |
| - CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE |
| - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE |
| - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE |
| - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE |
| |
| - HID: |
| - Fix gamepad template descriptor |
| - Add multiple HID interface API |
| - Add extra comma to HID_REPORT_ID |
| |
| USB Host |
| -------- |
| |
| - Rework USB host stack (still work in progress) |
| - Fix compile error with pipehandle |
| - Rework usbh control and enumeration as non-blocking |
| |
| - Improve Hub, MSC, HID host driver |
| |
| Examples |
| -------- |
| |
| - Add new hid_composite_freertos |
| - Add new dynamic_configuration to demonstrate how to switch configuration descriptors |
| - Add new hid_multiple_interface |
| |
| - Enhance `net_lwip_webserver` example |
| - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) |
| - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver |
| |
| - Added new Audio example: audio_test uac2_headsest |
| |
| New Boards |
| ---------- |
| |
| - Espressif ESP32-S2: saola_1, kaluga_1 |
| - STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo |
| - Dialog DA1469x dk pro and dk usb |
| - Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro |
| - nRF: ItsyBitsy nRF52840 |
| |
| |
| 0.6.0 (2020-03-30) |
| ================== |
| |
| Added **CONTRIBUTORS.md** to give proper credit for contributors to the stack. Special thanks to `Nathan Conrad <https://github.com/pigrew>`__ , `Peter Lawrence <https://github.com/majbthrd>`__ , `William D. Jones <https://github.com/cr1901>`__ and `Sean Cross <https://github.com/xobs>`__ and others for spending their precious time to add lots of features and ports for this release. |
| |
| Added |
| ----- |
| |
| **MCU** |
| |
| - Added support for Microchip SAMG55 |
| - Added support for Nordic nRF52833 |
| - Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505 |
| - Added support for NXP LPC: 51Uxx, 54xxx, 55xx |
| - Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064 |
| - Added support for Sony CXD56 (Spresense) |
| - Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7 |
| - Added support for TI MSP430 |
| - Added support for ValentyUSB's eptri |
| |
| **Class Driver** |
| |
| - Added DFU Runtime class driver |
| - Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress) |
| - Added USBTMC class driver |
| - Added WebUSB class driver using vendor-specific class |
| - Added multiple instances support for CDC and MIDI |
| - Added a handful of unit test with Ceedling. |
| - Added LOG support for debugging with CFG_TUSB_DEBUG |
| - Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1) |
| - Added `dcd_edpt0_status_complete()` as optional API for DCD |
| |
| **Examples** |
| |
| Following examples are added: |
| |
| - board_test |
| - cdc_dual_ports |
| - dfu_rt |
| - hid_composite |
| - net_lwip_webserver |
| - usbtmc |
| - webusb_serial |
| |
| Changed |
| ------- |
| |
| - Changed `tud_descriptor_string_cb()` to have additional Language ID argument |
| - Merged hal_nrf5x.c into dcd_nrf5x.c |
| - Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c |
| - Generalized dcd_stm32f4.c to dcd_synopsys.c |
| - Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs |
| - Improved DCD SAMD stability, fix missing setup packet occasionally |
| - Improved usbd/usbd_control with proper handling of zero-length packet (ZLP) |
| - Improved STM32 DCD FSDev |
| - Improved STM32 DCD Synopsys |
| - Migrated CI from Travis to Github Action |
| - Updated nrfx submodule to 2.1.0 |
| - Fixed mynewt osal queue definition |
| - Fixed cdc_msc_freertos example build for all MCUs |
| |
| |
| 0.5.0 (2019-06) |
| =============== |
| |
| First release, device stack works great, host stack works but still need improvement. |
| |
| - Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc... |
| - Thanks to @cr1901 for adding STM32F4 port. |
| - Thanks to @PTS93 and @todbot for HID raw API |
