| /* |
| * The MIT License (MIT) |
| * |
| * Copyright (c) 2019 Ha Thach (tinyusb.org) |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| * |
| * This file is part of the TinyUSB stack. |
| */ |
| |
| #include "tusb_option.h" |
| |
| #if (CFG_TUD_ENABLED && CFG_TUD_CDC) |
| |
| #include "device/usbd.h" |
| #include "device/usbd_pvt.h" |
| |
| #include "cdc_device.h" |
| |
| // Level where CFG_TUSB_DEBUG must be at least for this driver is logged |
| #ifndef CFG_TUD_CDC_LOG_LEVEL |
| #define CFG_TUD_CDC_LOG_LEVEL CFG_TUD_LOG_LEVEL |
| #endif |
| |
| #define TU_LOG_DRV(...) TU_LOG(CFG_TUD_CDC_LOG_LEVEL, __VA_ARGS__) |
| |
| //--------------------------------------------------------------------+ |
| // MACRO CONSTANT TYPEDEF |
| //--------------------------------------------------------------------+ |
| #define BULK_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) |
| |
| typedef struct { |
| uint8_t itf_num; |
| uint8_t ep_notif; |
| uint8_t ep_in; |
| uint8_t ep_out; |
| |
| // Bit 0: DTR (Data Terminal Ready), Bit 1: RTS (Request to Send) |
| uint8_t line_state; |
| |
| /*------------- From this point, data is not cleared by bus reset -------------*/ |
| char wanted_char; |
| TU_ATTR_ALIGNED(4) cdc_line_coding_t line_coding; |
| |
| // FIFO |
| tu_fifo_t rx_ff; |
| tu_fifo_t tx_ff; |
| |
| uint8_t rx_ff_buf[CFG_TUD_CDC_RX_BUFSIZE]; |
| uint8_t tx_ff_buf[CFG_TUD_CDC_TX_BUFSIZE]; |
| |
| OSAL_MUTEX_DEF(rx_ff_mutex); |
| OSAL_MUTEX_DEF(tx_ff_mutex); |
| } cdcd_interface_t; |
| |
| #define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, wanted_char) |
| |
| typedef struct { |
| TUD_EPBUF_DEF(epout, CFG_TUD_CDC_EP_BUFSIZE); |
| TUD_EPBUF_DEF(epin, CFG_TUD_CDC_EP_BUFSIZE); |
| } cdcd_epbuf_t; |
| |
| //--------------------------------------------------------------------+ |
| // INTERNAL OBJECT & FUNCTION DECLARATION |
| //--------------------------------------------------------------------+ |
| static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; |
| CFG_TUD_MEM_SECTION static cdcd_epbuf_t _cdcd_epbuf[CFG_TUD_CDC]; |
| |
| static tud_cdc_configure_fifo_t _cdcd_fifo_cfg; |
| |
| static bool _prep_out_transaction(uint8_t itf) { |
| const uint8_t rhport = 0; |
| cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; |
| cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; |
| |
| // Skip if usb is not ready yet |
| TU_VERIFY(tud_ready() && p_cdc->ep_out); |
| |
| uint16_t available = tu_fifo_remaining(&p_cdc->rx_ff); |
| |
| // Prepare for incoming data but only allow what we can store in the ring buffer. |
| // TODO Actually we can still carry out the transfer, keeping count of received bytes |
| // and slowly move it to the FIFO when read(). |
| // This pre-check reduces endpoint claiming |
| TU_VERIFY(available >= CFG_TUD_CDC_EP_BUFSIZE); |
| |
| // claim endpoint |
| TU_VERIFY(usbd_edpt_claim(rhport, p_cdc->ep_out)); |
| |
| // fifo can be changed before endpoint is claimed |
| available = tu_fifo_remaining(&p_cdc->rx_ff); |
| |
| if (available >= CFG_TUD_CDC_EP_BUFSIZE) { |
| return usbd_edpt_xfer(rhport, p_cdc->ep_out, p_epbuf->epout, CFG_TUD_CDC_EP_BUFSIZE); |
| } else { |
| // Release endpoint since we don't make any transfer |
| usbd_edpt_release(rhport, p_cdc->ep_out); |
| return false; |
| } |
| } |
| |
| //--------------------------------------------------------------------+ |
| // APPLICATION API |
| //--------------------------------------------------------------------+ |
| |
| bool tud_cdc_configure_fifo(const tud_cdc_configure_fifo_t* cfg) { |
| TU_VERIFY(cfg); |
| _cdcd_fifo_cfg = (*cfg); |
| return true; |
| } |
| |
| bool tud_cdc_n_ready(uint8_t itf) { |
| return tud_ready() && _cdcd_itf[itf].ep_in != 0 && _cdcd_itf[itf].ep_out != 0; |
| } |
| |
| bool tud_cdc_n_connected(uint8_t itf) { |
| // DTR (bit 0) active is considered as connected |
| return tud_ready() && tu_bit_test(_cdcd_itf[itf].line_state, 0); |
| } |
| |
| uint8_t tud_cdc_n_get_line_state(uint8_t itf) { |
| return _cdcd_itf[itf].line_state; |
| } |
| |
| void tud_cdc_n_get_line_coding(uint8_t itf, cdc_line_coding_t* coding) { |
| (*coding) = _cdcd_itf[itf].line_coding; |
| } |
| |
| void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { |
| _cdcd_itf[itf].wanted_char = wanted; |
| } |
| |
| //--------------------------------------------------------------------+ |
| // READ API |
| //--------------------------------------------------------------------+ |
| uint32_t tud_cdc_n_available(uint8_t itf) { |
| return tu_fifo_count(&_cdcd_itf[itf].rx_ff); |
| } |
| |
| uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; |
| uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); |
| _prep_out_transaction(itf); |
| return num_read; |
| } |
| |
| bool tud_cdc_n_peek(uint8_t itf, uint8_t* chr) { |
| return tu_fifo_peek(&_cdcd_itf[itf].rx_ff, chr); |
| } |
| |
| void tud_cdc_n_read_flush(uint8_t itf) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; |
| tu_fifo_clear(&p_cdc->rx_ff); |
| _prep_out_transaction(itf); |
| } |
| |
| //--------------------------------------------------------------------+ |
| // WRITE API |
| //--------------------------------------------------------------------+ |
| uint32_t tud_cdc_n_write(uint8_t itf, const void* buffer, uint32_t bufsize) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; |
| uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); |
| |
| // flush if queue more than packet size |
| if (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE |
| #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE |
| || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size |
| #endif |
| ) { |
| tud_cdc_n_write_flush(itf); |
| } |
| |
| return ret; |
| } |
| |
| uint32_t tud_cdc_n_write_flush(uint8_t itf) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; |
| cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; |
| |
| // Skip if usb is not ready yet |
| TU_VERIFY(tud_ready(), 0); |
| |
| // No data to send |
| if (!tu_fifo_count(&p_cdc->tx_ff)) { |
| return 0; |
| } |
| |
| const uint8_t rhport = 0; |
| |
| // Claim the endpoint |
| TU_VERIFY(usbd_edpt_claim(rhport, p_cdc->ep_in), 0); |
| |
| // Pull data from FIFO |
| const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); |
| |
| if (count) { |
| TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); |
| return count; |
| } else { |
| // Release endpoint since we don't make any transfer |
| // Note: data is dropped if terminal is not connected |
| usbd_edpt_release(rhport, p_cdc->ep_in); |
| return 0; |
| } |
| } |
| |
| uint32_t tud_cdc_n_write_available(uint8_t itf) { |
| return tu_fifo_remaining(&_cdcd_itf[itf].tx_ff); |
| } |
| |
| bool tud_cdc_n_write_clear(uint8_t itf) { |
| return tu_fifo_clear(&_cdcd_itf[itf].tx_ff); |
| } |
| |
| //--------------------------------------------------------------------+ |
| // USBD Driver API |
| //--------------------------------------------------------------------+ |
| void cdcd_init(void) { |
| tu_memclr(_cdcd_itf, sizeof(_cdcd_itf)); |
| tu_memclr(&_cdcd_fifo_cfg, sizeof(_cdcd_fifo_cfg)); |
| |
| for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[i]; |
| |
| p_cdc->wanted_char = (char) -1; |
| |
| // default line coding is : stop bit = 1, parity = none, data bits = 8 |
| p_cdc->line_coding.bit_rate = 115200; |
| p_cdc->line_coding.stop_bits = 0; |
| p_cdc->line_coding.parity = 0; |
| p_cdc->line_coding.data_bits = 8; |
| |
| // Config RX fifo |
| tu_fifo_config(&p_cdc->rx_ff, p_cdc->rx_ff_buf, TU_ARRAY_SIZE(p_cdc->rx_ff_buf), 1, false); |
| |
| // Config TX fifo as overwritable at initialization and will be changed to non-overwritable |
| // if terminal supports DTR bit. Without DTR we do not know if data is actually polled by terminal. |
| // In this way, the most current data is prioritized. |
| tu_fifo_config(&p_cdc->tx_ff, p_cdc->tx_ff_buf, TU_ARRAY_SIZE(p_cdc->tx_ff_buf), 1, true); |
| |
| #if OSAL_MUTEX_REQUIRED |
| osal_mutex_t mutex_rd = osal_mutex_create(&p_cdc->rx_ff_mutex); |
| osal_mutex_t mutex_wr = osal_mutex_create(&p_cdc->tx_ff_mutex); |
| TU_ASSERT(mutex_rd != NULL && mutex_wr != NULL, ); |
| |
| tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, mutex_rd); |
| tu_fifo_config_mutex(&p_cdc->tx_ff, mutex_wr, NULL); |
| #endif |
| } |
| } |
| |
| bool cdcd_deinit(void) { |
| #if OSAL_MUTEX_REQUIRED |
| for(uint8_t i=0; i<CFG_TUD_CDC; i++) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[i]; |
| osal_mutex_t mutex_rd = p_cdc->rx_ff.mutex_rd; |
| osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; |
| |
| if (mutex_rd) { |
| osal_mutex_delete(mutex_rd); |
| tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); |
| } |
| |
| if (mutex_wr) { |
| osal_mutex_delete(mutex_wr); |
| tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); |
| } |
| } |
| #endif |
| |
| return true; |
| } |
| |
| void cdcd_reset(uint8_t rhport) { |
| (void) rhport; |
| |
| for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { |
| cdcd_interface_t* p_cdc = &_cdcd_itf[i]; |
| |
| tu_memclr(p_cdc, ITF_MEM_RESET_SIZE); |
| if (!_cdcd_fifo_cfg.rx_persistent) { |
| tu_fifo_clear(&p_cdc->rx_ff); |
| } |
| if (!_cdcd_fifo_cfg.tx_persistent) { |
| tu_fifo_clear(&p_cdc->tx_ff); |
| } |
| tu_fifo_set_overwritable(&p_cdc->tx_ff, true); |
| } |
| } |
| |
| uint16_t cdcd_open(uint8_t rhport, const tusb_desc_interface_t* itf_desc, uint16_t max_len) { |
| // Only support ACM subclass |
| TU_VERIFY( TUSB_CLASS_CDC == itf_desc->bInterfaceClass && |
| CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == itf_desc->bInterfaceSubClass, 0); |
| |
| // Find available interface |
| cdcd_interface_t* p_cdc; |
| uint8_t cdc_id; |
| for (cdc_id = 0; cdc_id < CFG_TUD_CDC; cdc_id++) { |
| p_cdc = &_cdcd_itf[cdc_id]; |
| if (p_cdc->ep_in == 0) { |
| break; |
| } |
| } |
| TU_ASSERT(cdc_id < CFG_TUD_CDC, 0); |
| |
| //------------- Control Interface -------------// |
| p_cdc->itf_num = itf_desc->bInterfaceNumber; |
| |
| uint16_t drv_len = sizeof(tusb_desc_interface_t); |
| const uint8_t* p_desc = tu_desc_next(itf_desc); |
| |
| // Communication Functional Descriptors |
| while (TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc) && drv_len <= max_len) { |
| drv_len += tu_desc_len(p_desc); |
| p_desc = tu_desc_next(p_desc); |
| } |
| |
| if (TUSB_DESC_ENDPOINT == tu_desc_type(p_desc)) { |
| // notification endpoint |
| const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; |
| |
| TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); |
| p_cdc->ep_notif = desc_ep->bEndpointAddress; |
| |
| drv_len += tu_desc_len(p_desc); |
| p_desc = tu_desc_next(p_desc); |
| } |
| |
| //------------- Data Interface (if any) -------------// |
| if ((TUSB_DESC_INTERFACE == tu_desc_type(p_desc)) && |
| (TUSB_CLASS_CDC_DATA == ((const tusb_desc_interface_t*) p_desc)->bInterfaceClass)) { |
| // next to endpoint descriptor |
| drv_len += tu_desc_len(p_desc); |
| p_desc = tu_desc_next(p_desc); |
| |
| // Open endpoint pair |
| TU_ASSERT(usbd_open_edpt_pair(rhport, p_desc, 2, TUSB_XFER_BULK, &p_cdc->ep_out, &p_cdc->ep_in), 0); |
| |
| drv_len += 2 * sizeof(tusb_desc_endpoint_t); |
| } |
| |
| // Prepare for incoming data |
| _prep_out_transaction(cdc_id); |
| |
| return drv_len; |
| } |
| |
| // Invoked when a control transfer occurred on an interface of this class |
| // Driver response accordingly to the request and the transfer stage (setup/data/ack) |
| // return false to stall control endpoint (e.g unsupported request) |
| bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t* request) { |
| // Handle class request only |
| TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS); |
| |
| uint8_t itf; |
| cdcd_interface_t* p_cdc; |
| |
| // Identify which interface to use |
| for (itf = 0; itf < CFG_TUD_CDC; itf++) { |
| p_cdc = &_cdcd_itf[itf]; |
| if (p_cdc->itf_num == request->wIndex) { |
| break; |
| } |
| } |
| TU_VERIFY(itf < CFG_TUD_CDC); |
| |
| switch (request->bRequest) { |
| case CDC_REQUEST_SET_LINE_CODING: |
| if (stage == CONTROL_STAGE_SETUP) { |
| TU_LOG_DRV(" Set Line Coding\r\n"); |
| tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); |
| } else if (stage == CONTROL_STAGE_ACK) { |
| if (tud_cdc_line_coding_cb) { |
| tud_cdc_line_coding_cb(itf, &p_cdc->line_coding); |
| } |
| } |
| break; |
| |
| case CDC_REQUEST_GET_LINE_CODING: |
| if (stage == CONTROL_STAGE_SETUP) { |
| TU_LOG_DRV(" Get Line Coding\r\n"); |
| tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); |
| } |
| break; |
| |
| case CDC_REQUEST_SET_CONTROL_LINE_STATE: |
| if (stage == CONTROL_STAGE_SETUP) { |
| tud_control_status(rhport, request); |
| } else if (stage == CONTROL_STAGE_ACK) { |
| // CDC PSTN v1.2 section 6.3.12 |
| // Bit 0: Indicates if DTE is present or not. |
| // This signal corresponds to V.24 signal 108/2 and RS-232 signal DTR (Data Terminal Ready) |
| // Bit 1: Carrier control for half-duplex modems. |
| // This signal corresponds to V.24 signal 105 and RS-232 signal RTS (Request to Send) |
| bool const dtr = tu_bit_test(request->wValue, 0); |
| bool const rts = tu_bit_test(request->wValue, 1); |
| |
| p_cdc->line_state = (uint8_t) request->wValue; |
| |
| // Disable fifo overwriting if DTR bit is set |
| tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); |
| |
| TU_LOG_DRV(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); |
| |
| // Invoke callback |
| if (tud_cdc_line_state_cb) { |
| tud_cdc_line_state_cb(itf, dtr, rts); |
| } |
| } |
| break; |
| |
| case CDC_REQUEST_SEND_BREAK: |
| if (stage == CONTROL_STAGE_SETUP) { |
| tud_control_status(rhport, request); |
| } else if (stage == CONTROL_STAGE_ACK) { |
| TU_LOG_DRV(" Send Break\r\n"); |
| if (tud_cdc_send_break_cb) { |
| tud_cdc_send_break_cb(itf, request->wValue); |
| } |
| } |
| break; |
| |
| default: |
| return false; // stall unsupported request |
| } |
| |
| return true; |
| } |
| |
| bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { |
| (void) result; |
| |
| uint8_t itf; |
| cdcd_interface_t* p_cdc; |
| |
| // Identify which interface to use |
| for (itf = 0; itf < CFG_TUD_CDC; itf++) { |
| p_cdc = &_cdcd_itf[itf]; |
| if ((ep_addr == p_cdc->ep_out) || (ep_addr == p_cdc->ep_in)) { |
| break; |
| } |
| } |
| TU_ASSERT(itf < CFG_TUD_CDC); |
| cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; |
| |
| // Received new data |
| if (ep_addr == p_cdc->ep_out) { |
| tu_fifo_write_n(&p_cdc->rx_ff, p_epbuf->epout, (uint16_t) xferred_bytes); |
| |
| // Check for wanted char and invoke callback if needed |
| if (tud_cdc_rx_wanted_cb && (((signed char) p_cdc->wanted_char) != -1)) { |
| for (uint32_t i = 0; i < xferred_bytes; i++) { |
| if ((p_cdc->wanted_char == p_epbuf->epout[i]) && !tu_fifo_empty(&p_cdc->rx_ff)) { |
| tud_cdc_rx_wanted_cb(itf, p_cdc->wanted_char); |
| } |
| } |
| } |
| |
| // invoke receive callback (if there is still data) |
| if (tud_cdc_rx_cb && !tu_fifo_empty(&p_cdc->rx_ff)) { |
| tud_cdc_rx_cb(itf); |
| } |
| |
| // prepare for OUT transaction |
| _prep_out_transaction(itf); |
| } |
| |
| // Data sent to host, we continue to fetch from tx fifo to send. |
| // Note: This will cause incorrect baudrate set in line coding. |
| // Though maybe the baudrate is not really important !!! |
| if (ep_addr == p_cdc->ep_in) { |
| // invoke transmit callback to possibly refill tx fifo |
| if (tud_cdc_tx_complete_cb) { |
| tud_cdc_tx_complete_cb(itf); |
| } |
| |
| if (0 == tud_cdc_n_write_flush(itf)) { |
| // If there is no data left, a ZLP should be sent if |
| // xferred_bytes is multiple of EP Packet size and not zero |
| if (!tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { |
| if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { |
| usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0); |
| } |
| } |
| } |
| } |
| |
| // nothing to do with notif endpoint for now |
| |
| return true; |
| } |
| |
| #endif |