| /* |
| * The MIT License (MIT) |
| * |
| * Copyright (c) 2019 Ha Thach (tinyusb.org) |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| * |
| * This file is part of the TinyUSB stack. |
| */ |
| |
| #ifndef _TUSB_OPTION_H_ |
| #define _TUSB_OPTION_H_ |
| |
| #define TUSB_VERSION_MAJOR 0 |
| #define TUSB_VERSION_MINOR 5 |
| #define TUSB_VERSION_REVISION 0 |
| #define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) |
| |
| /** \defgroup group_mcu Supported MCU |
| * \ref CFG_TUSB_MCU must be defined to one of these |
| * @{ */ |
| |
| #define OPT_MCU_NONE 0 |
| |
| // LPC |
| #define OPT_MCU_LPC11UXX 1 ///< NXP LPC11Uxx |
| #define OPT_MCU_LPC13XX 2 ///< NXP LPC13xx |
| #define OPT_MCU_LPC15XX 3 ///< NXP LPC15xx |
| #define OPT_MCU_LPC175X_6X 4 ///< NXP LPC175x, LPC176x |
| #define OPT_MCU_LPC177X_8X 5 ///< NXP LPC177x, LPC178x |
| #define OPT_MCU_LPC18XX 6 ///< NXP LPC18xx |
| #define OPT_MCU_LPC40XX 7 ///< NXP LPC40xx |
| #define OPT_MCU_LPC43XX 8 ///< NXP LPC43xx |
| #define OPT_MCU_LPC51UXX 9 ///< NXP LPC51U6x |
| #define OPT_MCU_LPC54XXX 10 ///< NXP LPC54xxx |
| #define OPT_MCU_LPC55XX 11 ///< NXP LPC55xx |
| |
| // NRF |
| #define OPT_MCU_NRF5X 100 ///< Nordic nRF5x series |
| |
| // SAM |
| #define OPT_MCU_SAMD11 204 ///< MicroChip SAMD11 |
| #define OPT_MCU_SAMD21 200 ///< MicroChip SAMD21 |
| #define OPT_MCU_SAMD51 201 ///< MicroChip SAMD51 |
| #define OPT_MCU_SAME5X 203 ///< MicroChip SAM E5x |
| #define OPT_MCU_SAMG 202 ///< MicroChip SAMDG series |
| |
| // STM32 |
| #define OPT_MCU_STM32F0 300 ///< ST STM32F0 |
| #define OPT_MCU_STM32F1 301 ///< ST STM32F1 |
| #define OPT_MCU_STM32F2 302 ///< ST STM32F2 |
| #define OPT_MCU_STM32F3 303 ///< ST STM32F3 |
| #define OPT_MCU_STM32F4 304 ///< ST STM32F4 |
| #define OPT_MCU_STM32F7 305 ///< ST STM32F7 |
| #define OPT_MCU_STM32H7 306 ///< ST STM32H7 |
| #define OPT_MCU_STM32L0 307 ///< ST STM32L0 |
| #define OPT_MCU_STM32L1 308 ///< ST STM32L1 |
| #define OPT_MCU_STM32L4 309 ///< ST STM32L4 |
| |
| // Sony |
| #define OPT_MCU_CXD56 400 ///< SONY CXD56 |
| |
| // TI MSP430 |
| #define OPT_MCU_MSP430x5xx 500 ///< TI MSP430x5xx |
| |
| // ValentyUSB eptri |
| #define OPT_MCU_VALENTYUSB_EPTRI 600 ///< Fomu eptri config |
| |
| // NXP iMX RT |
| #define OPT_MCU_MIMXRT10XX 700 ///< NXP iMX RT10xx |
| |
| // Nuvoton |
| #define OPT_MCU_NUC121 800 |
| #define OPT_MCU_NUC126 801 |
| #define OPT_MCU_NUC120 802 |
| #define OPT_MCU_NUC505 803 |
| |
| // Espressif |
| #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 |
| |
| // Dialog |
| #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x |
| |
| /** @} */ |
| |
| /** \defgroup group_supported_os Supported RTOS |
| * \ref CFG_TUSB_OS must be defined to one of these |
| * @{ */ |
| #define OPT_OS_NONE 1 ///< No RTOS |
| #define OPT_OS_FREERTOS 2 ///< FreeRTOS |
| #define OPT_OS_MYNEWT 3 ///< Mynewt OS |
| #define OPT_OS_CUSTOM 4 ///< Custom OS is implemented by application |
| /** @} */ |
| |
| |
| // Allow to use command line to change the config name/location |
| #ifndef CFG_TUSB_CONFIG_FILE |
| #define CFG_TUSB_CONFIG_FILE "tusb_config.h" |
| #endif |
| |
| #include CFG_TUSB_CONFIG_FILE |
| |
| /** \addtogroup group_configuration |
| * @{ */ |
| |
| |
| //-------------------------------------------------------------------- |
| // RootHub Mode Configuration |
| // CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port |
| //-------------------------------------------------------------------- |
| |
| // Lower 4-bit is operational mode |
| #define OPT_MODE_NONE 0x00 ///< Disabled |
| #define OPT_MODE_DEVICE 0x01 ///< Device Mode |
| #define OPT_MODE_HOST 0x02 ///< Host Mode |
| |
| // Higher 4-bit is max operational speed (corresponding to tusb_speed_t) |
| #define OPT_MODE_FULL_SPEED 0x00 ///< Max Full Speed |
| #define OPT_MODE_LOW_SPEED 0x10 ///< Max Low Speed |
| #define OPT_MODE_HIGH_SPEED 0x20 ///< Max High Speed |
| |
| |
| #ifndef CFG_TUSB_RHPORT0_MODE |
| #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE |
| #endif |
| |
| |
| #ifndef CFG_TUSB_RHPORT1_MODE |
| #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE |
| #endif |
| |
| #if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST ) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST )) || \ |
| ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE)) |
| #error "TinyUSB currently does not support same modes on more than 1 roothub port" |
| #endif |
| |
| // Which roothub port is configured as host |
| #define TUH_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) ) |
| #define TUSB_OPT_HOST_ENABLED ( TUH_OPT_RHPORT >= 0 ) |
| |
| // Which roothub port is configured as device |
| #define TUD_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) ) |
| |
| #if TUD_OPT_RHPORT == 0 |
| #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED ) |
| #else |
| #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED ) |
| #endif |
| |
| #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 ) |
| |
| //--------------------------------------------------------------------+ |
| // COMMON OPTIONS |
| //--------------------------------------------------------------------+ |
| |
| // Debug enable to print out error message |
| #ifndef CFG_TUSB_DEBUG |
| #define CFG_TUSB_DEBUG 0 |
| #endif |
| |
| // place data in accessible RAM for usb controller |
| #ifndef CFG_TUSB_MEM_SECTION |
| #define CFG_TUSB_MEM_SECTION |
| #endif |
| |
| #ifndef CFG_TUSB_MEM_ALIGN |
| #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) |
| #endif |
| |
| #ifndef CFG_TUSB_OS |
| #define CFG_TUSB_OS OPT_OS_NONE |
| #endif |
| |
| //-------------------------------------------------------------------- |
| // DEVICE OPTIONS |
| //-------------------------------------------------------------------- |
| |
| #ifndef CFG_TUD_ENDPOINT0_SIZE |
| #define CFG_TUD_ENDPOINT0_SIZE 64 |
| #endif |
| |
| #ifndef CFG_TUD_CDC |
| #define CFG_TUD_CDC 0 |
| #endif |
| |
| #ifndef CFG_TUD_MSC |
| #define CFG_TUD_MSC 0 |
| #endif |
| |
| #ifndef CFG_TUD_HID |
| #define CFG_TUD_HID 0 |
| #endif |
| |
| #ifndef CFG_TUD_MIDI |
| #define CFG_TUD_MIDI 0 |
| #endif |
| |
| #ifndef CFG_TUD_VENDOR |
| #define CFG_TUD_VENDOR 0 |
| #endif |
| |
| #ifndef CFG_TUD_USBTMC |
| #define CFG_TUD_USBTMC 0 |
| #endif |
| |
| #ifndef CFG_TUD_DFU_RT |
| #define CFG_TUD_DFU_RT 0 |
| #endif |
| |
| #ifndef CFG_TUD_NET |
| #define CFG_TUD_NET 0 |
| #endif |
| |
| #ifndef CFG_TUD_BTH |
| #define CFG_TUD_BTH 0 |
| #endif |
| |
| //-------------------------------------------------------------------- |
| // HOST OPTIONS |
| //-------------------------------------------------------------------- |
| #if TUSB_OPT_HOST_ENABLED |
| #ifndef CFG_TUSB_HOST_DEVICE_MAX |
| #define CFG_TUSB_HOST_DEVICE_MAX 1 |
| #warning CFG_TUSB_HOST_DEVICE_MAX is not defined, default value is 1 |
| #endif |
| |
| //------------- HUB CLASS -------------// |
| #if CFG_TUH_HUB && (CFG_TUSB_HOST_DEVICE_MAX == 1) |
| #error there is no benefit enable hub with max device is 1. Please disable hub or increase CFG_TUSB_HOST_DEVICE_MAX |
| #endif |
| |
| //------------- HID CLASS -------------// |
| #define HOST_CLASS_HID ( CFG_TUH_HID_KEYBOARD + CFG_TUH_HID_MOUSE + CFG_TUSB_HOST_HID_GENERIC ) |
| |
| #ifndef CFG_TUSB_HOST_ENUM_BUFFER_SIZE |
| #define CFG_TUSB_HOST_ENUM_BUFFER_SIZE 256 |
| #endif |
| |
| //------------- CLASS -------------// |
| #endif // TUSB_OPT_HOST_ENABLED |
| |
| |
| //------------------------------------------------------------------ |
| // Configuration Validation |
| //------------------------------------------------------------------ |
| #if CFG_TUD_ENDPOINT0_SIZE > 64 |
| #error Control Endpoint Max Packet Size cannot be larger than 64 |
| #endif |
| |
| #endif /* _TUSB_OPTION_H_ */ |
| |
| /** @} */ |
