cmake/CoverallsGenerateGcov.cmake - third_party/github/jimsch/cn-cbor - Git at Google

 #
 # Permission is hereby granted, free of charge, to any person obtaining a copy
 # of this software and associated documentation files (the "Software"), to deal
 # in the Software without restriction, including without limitation the rights
 # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 # copies of the Software, and to permit persons to whom the Software is
 # furnished to do so, subject to the following conditions:
 #
 # The above copyright notice and this permission notice shall be included in all
 # copies or substantial portions of the Software.
 #
 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 # SOFTWARE.
 #
 # Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com>
 #
 # This is intended to be run by a custom target in a CMake project like this.
 # 0. Compile program with coverage support.
 # 1. Clear coverage data. (Recursively delete *.gcda in build dir)
 # 2. Run the unit tests.
 # 3. Run this script specifying which source files the coverage should be performed on.
 #
 # This script will then use gcov to generate .gcov files in the directory specified
 # via the COV_PATH var. This should probably be the same as your cmake build dir.
 #
 # It then parses the .gcov files to convert them into the Coveralls JSON format:
 # https://coveralls.io/docs/api
 #
 # Example for running as standalone CMake script from the command line:
 # (Note it is important the -P is at the end...)
 # $ cmake -DCOV_PATH=$(pwd)
 #         -DCOVERAGE_SRCS="catcierge_rfid.c;catcierge_timer.c"
 #         -P ../cmake/CoverallsGcovUpload.cmake
 #
 CMAKE_MINIMUM_REQUIRED(VERSION 2.8)


 #
 # Make sure we have the needed arguments.
 #
 if (NOT COVERALLS_OUTPUT_FILE)
 	message(FATAL_ERROR "Coveralls: No coveralls output file specified. Please set COVERALLS_OUTPUT_FILE")
 endif()

 if (NOT COV_PATH)
 	message(FATAL_ERROR "Coveralls: Missing coverage directory path where gcov files will be generated. Please set COV_PATH")
 endif()

 if (NOT COVERAGE_SRCS)
 	message(FATAL_ERROR "Coveralls: Missing the list of source files that we should get the coverage data for COVERAGE_SRCS")
 endif()

 if (NOT PROJECT_ROOT)
 	message(FATAL_ERROR "Coveralls: Missing PROJECT_ROOT.")
 endif()

 # Since it's not possible to pass a CMake list properly in the
 # "1;2;3" format to an external process, we have replaced the
 # ";" with "*", so reverse that here so we get it back into the
 # CMake list format.
 string(REGEX REPLACE "\\*" ";" COVERAGE_SRCS ${COVERAGE_SRCS})

 find_program(GCOV_EXECUTABLE gcov)

 if (NOT GCOV_EXECUTABLE)
 	message(FATAL_ERROR "gcov not found! Aborting...")
 endif()

 find_package(Git)

 # TODO: Add these git things to the coveralls json.
 if (GIT_FOUND)
 	# Branch.
 	execute_process(
 		COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
 		WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
 		OUTPUT_VARIABLE GIT_BRANCH
 		OUTPUT_STRIP_TRAILING_WHITESPACE
 	)

 	macro (git_log_format FORMAT_CHARS VAR_NAME)
 		execute_process(
 			COMMAND ${GIT_EXECUTABLE} log -1 --pretty=format:%${FORMAT_CHARS}
 			WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
 			OUTPUT_VARIABLE ${VAR_NAME}
 			OUTPUT_STRIP_TRAILING_WHITESPACE
 		)
 	endmacro()

 	git_log_format(an GIT_AUTHOR_EMAIL)
 	git_log_format(ae GIT_AUTHOR_EMAIL)
 	git_log_format(cn GIT_COMMITTER_NAME)
 	git_log_format(ce GIT_COMMITTER_EMAIL)
 	git_log_format(B GIT_COMMIT_MESSAGE)

 	message("Git exe: ${GIT_EXECUTABLE}")
 	message("Git branch: ${GIT_BRANCH}")
 	message("Git author: ${GIT_AUTHOR_NAME}")
 	message("Git e-mail: ${GIT_AUTHOR_EMAIL}")
 	message("Git commiter name: ${GIT_COMMITTER_NAME}")
 	message("Git commiter e-mail: ${GIT_COMMITTER_EMAIL}")
 	message("Git commit message: ${GIT_COMMIT_MESSAGE}")

 endif()

 ############################# Macros #########################################

 #
 # This macro converts from the full path format gcov outputs:
 #
 #    /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
 #
 # to the original source file path the .gcov is for:
 #
 #   /path/to/project/root/subdir/the_file.c
 #
 macro(get_source_path_from_gcov_filename _SRC_FILENAME _GCOV_FILENAME)

 	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
 	# ->
 	# #path#to#project#root#subdir#the_file.c.gcov
 	get_filename_component(_GCOV_FILENAME_WEXT ${_GCOV_FILENAME} NAME)

 	# #path#to#project#root#subdir#the_file.c.gcov -> /path/to/project/root/subdir/the_file.c
 	string(REGEX REPLACE "\\.gcov$" "" SRC_FILENAME_TMP ${_GCOV_FILENAME_WEXT})
 	string(REGEX REPLACE "\#" "/" SRC_FILENAME_TMP ${SRC_FILENAME_TMP})
 	set(${_SRC_FILENAME} "${SRC_FILENAME_TMP}")
 endmacro()

 ##############################################################################

 # Get the coverage data.
 file(GLOB_RECURSE GCDA_FILES "${COV_PATH}/*.gcda")
 message("GCDA files:")

 # Get a list of all the object directories needed by gcov
 # (The directories the .gcda files and .o files are found in)
 # and run gcov on those.
 foreach(GCDA ${GCDA_FILES})
 	message("Process: ${GCDA}")
 	message("------------------------------------------------------------------------------")
 	get_filename_component(GCDA_DIR ${GCDA} PATH)

 	#
 	# The -p below refers to "Preserve path components",
 	# This means that the generated gcov filename of a source file will
 	# keep the original files entire filepath, but / is replaced with #.
 	# Example:
 	#
 	# /path/to/project/root/build/CMakeFiles/the_file.dir/subdir/the_file.c.gcda
 	# ------------------------------------------------------------------------------
 	# File '/path/to/project/root/subdir/the_file.c'
 	# Lines executed:68.34% of 199
 	# /path/to/project/root/subdir/the_file.c:creating '#path#to#project#root#subdir#the_file.c.gcov'
 	#
 	# If -p is not specified then the file is named only "the_file.c.gcov"
 	#
 	execute_process(
 		COMMAND ${GCOV_EXECUTABLE} -c -p -o ${GCDA_DIR} ${GCDA}
 		WORKING_DIRECTORY ${COV_PATH}
 	)
 endforeach()

 # TODO: Make these be absolute path
 file(GLOB ALL_GCOV_FILES ${COV_PATH}/*.gcov)

 # Get only the filenames to use for filtering.
 #set(COVERAGE_SRCS_NAMES "")
 #foreach (COVSRC ${COVERAGE_SRCS})
 #	get_filename_component(COVSRC_NAME ${COVSRC} NAME)
 #	message("${COVSRC} -> ${COVSRC_NAME}")
 #	list(APPEND COVERAGE_SRCS_NAMES "${COVSRC_NAME}")
 #endforeach()

 #
 # Filter out all but the gcov files we want.
 #
 # We do this by comparing the list of COVERAGE_SRCS filepaths that the
 # user wants the coverage data for with the paths of the generated .gcov files,
 # so that we only keep the relevant gcov files.
 #
 # Example:
 # COVERAGE_SRCS =
 #				/path/to/project/root/subdir/the_file.c
 #
 # ALL_GCOV_FILES =
 #				/path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
 #				/path/to/project/root/build/#path#to#project#root#subdir#other_file.c.gcov
 #
 # Result should be:
 # GCOV_FILES =
 #				/path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
 #
 set(GCOV_FILES "")
 #message("Look in coverage sources: ${COVERAGE_SRCS}")
 message("\nFilter out unwanted GCOV files:")
 message("===============================")

 set(COVERAGE_SRCS_REMAINING ${COVERAGE_SRCS})

 foreach (GCOV_FILE ${ALL_GCOV_FILES})

 	#
 	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
 	# ->
 	# /path/to/project/root/subdir/the_file.c
 	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})

 	# Is this in the list of source files?
 	# TODO: We want to match against relative path filenames from the source file root...
 	list(FIND COVERAGE_SRCS ${GCOV_SRC_PATH} WAS_FOUND)

 	if (NOT WAS_FOUND EQUAL -1)
 		message("YES: ${GCOV_FILE}")
 		list(APPEND GCOV_FILES ${GCOV_FILE})

 		# We remove it from the list, so we don't bother searching for it again.
 		# Also files left in COVERAGE_SRCS_REMAINING after this loop ends should
 		# have coverage data generated from them (no lines are covered).
 		list(REMOVE_ITEM COVERAGE_SRCS_REMAINING ${GCOV_SRC_PATH})
 	else()
 		message("NO:  ${GCOV_FILE}")
 	endif()
 endforeach()

 # TODO: Enable setting these
 set(JSON_SERVICE_NAME "travis-ci")
 set(JSON_SERVICE_JOB_ID $ENV{TRAVIS_JOB_ID})

 set(JSON_TEMPLATE
 "{
   \"service_name\": \"\@JSON_SERVICE_NAME\@\",
   \"service_job_id\": \"\@JSON_SERVICE_JOB_ID\@\",
   \"source_files\": \@JSON_GCOV_FILES\@
 }"
 )

 set(SRC_FILE_TEMPLATE
 "{
       \"name\": \"\@GCOV_SRC_REL_PATH\@\",
       \"source_digest\": \"\@GCOV_CONTENTS_MD5\@\",
       \"coverage\": \@GCOV_FILE_COVERAGE\@
   }"
 )

 message("\nGenerate JSON for files:")
 message("=========================")

 set(JSON_GCOV_FILES "[")

 # Read the GCOV files line by line and get the coverage data.
 foreach (GCOV_FILE ${GCOV_FILES})

 	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})
 	file(RELATIVE_PATH GCOV_SRC_REL_PATH "${PROJECT_ROOT}" "${GCOV_SRC_PATH}")

 	# The new coveralls API doesn't need the entire source (Yay!)
 	# However, still keeping that part for now. Will cleanup in the future.
 	file(MD5 "${GCOV_SRC_PATH}" GCOV_CONTENTS_MD5)
 	message("MD5: ${GCOV_SRC_PATH} = ${GCOV_CONTENTS_MD5}")

 	# Loads the gcov file as a list of lines.
 	# (We first open the file and replace all occurences of [] with _
 	#  because CMake will fail to parse a line containing unmatched brackets...
 	#  also the \ to escaped \n in macros screws up things.)
 	# https://public.kitware.com/Bug/view.php?id=15369
 	file(READ ${GCOV_FILE} GCOV_CONTENTS)
 	string(REPLACE "[" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
 	string(REPLACE "]" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
 	string(REPLACE "\\" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
 	file(WRITE ${GCOV_FILE}_tmp "${GCOV_CONTENTS}")

 	file(STRINGS ${GCOV_FILE}_tmp GCOV_LINES)
 	list(LENGTH GCOV_LINES LINE_COUNT)

 	# Instead of trying to parse the source from the
 	# gcov file, simply read the file contents from the source file.
 	# (Parsing it from the gcov is hard because C-code uses ; in many places
 	#  which also happens to be the same as the CMake list delimeter).
 	file(READ ${GCOV_SRC_PATH} GCOV_FILE_SOURCE)

 	string(REPLACE "\\" "\\\\" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	string(REGEX REPLACE "\"" "\\\\\"" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	string(REPLACE "\t" "\\\\t" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	string(REPLACE "\r" "\\\\r" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	string(REPLACE "\n" "\\\\n" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	# According to http://json.org/ these should be escaped as well.
 	# Don't know how to do that in CMake however...
 	#string(REPLACE "\b" "\\\\b" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	#string(REPLACE "\f" "\\\\f" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
 	#string(REGEX REPLACE "\u([a-fA-F0-9]{4})" "\\\\u\\1" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")

 	# We want a json array of coverage data as a single string
 	# start building them from the contents of the .gcov
 	set(GCOV_FILE_COVERAGE "[")

 	set(GCOV_LINE_COUNT 1) # Line number for the .gcov.
 	set(DO_SKIP 0)
 	foreach (GCOV_LINE ${GCOV_LINES})
 		#message("${GCOV_LINE}")
 		# Example of what we're parsing:
 		# Hitcount  |Line | Source
 		# "        8:   26:        if (!allowed || (strlen(allowed) == 0))"
 		string(REGEX REPLACE
 			"^([^:]*):([^:]*):(.*)$"
 			"\\1;\\2;\\3"
 			RES
 			"${GCOV_LINE}")

 		# Check if we should exclude lines using the Lcov syntax.
 		string(REGEX MATCH "LCOV_EXCL_START" START_SKIP "${GCOV_LINE}")
 		string(REGEX MATCH "LCOV_EXCL_END" END_SKIP "${GCOV_LINE}")
 		string(REGEX MATCH "LCOV_EXCL_LINE" LINE_SKIP "${GCOV_LINE}")

 		set(RESET_SKIP 0)
 		if (LINE_SKIP AND NOT DO_SKIP)
 			set(DO_SKIP 1)
 			set(RESET_SKIP 1)
 		endif()

 		if (START_SKIP)
 			set(DO_SKIP 1)
 			message("${GCOV_LINE_COUNT}: Start skip")
 		endif()

 		if (END_SKIP)
 			set(DO_SKIP 0)
 		endif()

 		list(LENGTH RES RES_COUNT)

 		if (RES_COUNT GREATER 2)
 			list(GET RES 0 HITCOUNT)
 			list(GET RES 1 LINE)
 			list(GET RES 2 SOURCE)

 			string(STRIP ${HITCOUNT} HITCOUNT)
 			string(STRIP ${LINE} LINE)

 			# Lines with 0 line numbers are metadata and can be ignored.
 			if (NOT ${LINE} EQUAL 0)

 				if (DO_SKIP)
 					set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
 				else()
 					# Translate the hitcount into valid JSON values.
 					if (${HITCOUNT} STREQUAL "#####")
 						set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")
 					elseif (${HITCOUNT} STREQUAL "-")
 						set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
 					else()
 						set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}${HITCOUNT}, ")
 					endif()
 				endif()
 			endif()
 		else()
 			message(WARNING "Failed to properly parse line (RES_COUNT = ${RES_COUNT}) ${GCOV_FILE}:${GCOV_LINE_COUNT}\n-->${GCOV_LINE}")
 		endif()

 		if (RESET_SKIP)
 			set(DO_SKIP 0)
 		endif()
 		math(EXPR GCOV_LINE_COUNT "${GCOV_LINE_COUNT}+1")
 	endforeach()

 	message("${GCOV_LINE_COUNT} of ${LINE_COUNT} lines read!")

 	# Advanced way of removing the trailing comma in the JSON array.
 	# "[1, 2, 3, " -> "[1, 2, 3"
 	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})

 	# Append the trailing ] to complete the JSON array.
 	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

 	# Generate the final JSON for this file.
 	message("Generate JSON for file: ${GCOV_SRC_REL_PATH}...")
 	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)

 	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
 endforeach()

 # Loop through all files we couldn't find any coverage for
 # as well, and generate JSON for those as well with 0% coverage.
 foreach(NOT_COVERED_SRC ${COVERAGE_SRCS_REMAINING})

 	# Loads the source file as a list of lines.
 	file(STRINGS ${NOT_COVERED_SRC} SRC_LINES)

 	set(GCOV_FILE_COVERAGE "[")
 	set(GCOV_FILE_SOURCE "")

 	foreach (SOURCE ${SRC_LINES})
 		set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")

 		string(REPLACE "\\" "\\\\" SOURCE "${SOURCE}")
 		string(REGEX REPLACE "\"" "\\\\\"" SOURCE "${SOURCE}")
 		string(REPLACE "\t" "\\\\t" SOURCE "${SOURCE}")
 		string(REPLACE "\r" "\\\\r" SOURCE "${SOURCE}")
 		set(GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}${SOURCE}\\n")
 	endforeach()

 	# Remove trailing comma, and complete JSON array with ]
 	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})
 	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

 	# Generate the final JSON for this file.
 	message("Generate JSON for non-gcov file: ${NOT_COVERED_SRC}...")
 	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)
 	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
 endforeach()

 # Get rid of trailing comma.
 string(REGEX REPLACE ",[ ]*$" "" JSON_GCOV_FILES ${JSON_GCOV_FILES})
 set(JSON_GCOV_FILES "${JSON_GCOV_FILES}]")

 # Generate the final complete JSON!
 message("Generate final JSON...")
 string(CONFIGURE ${JSON_TEMPLATE} JSON)

 file(WRITE "${COVERALLS_OUTPUT_FILE}" "${JSON}")
 message("###########################################################################")
 message("Generated coveralls JSON containing coverage data:")
 message("${COVERALLS_OUTPUT_FILE}")
 message("###########################################################################")
	#
	# Permission is hereby granted, free of charge, to any person obtaining a copy
	# of this software and associated documentation files (the "Software"), to deal
	# in the Software without restriction, including without limitation the rights
	# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
	# copies of the Software, and to permit persons to whom the Software is
	# furnished to do so, subject to the following conditions:
	#
	# The above copyright notice and this permission notice shall be included in all
	# copies or substantial portions of the Software.
	#
	# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
	# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
	# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
	# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
	# SOFTWARE.
	#
	# Copyright (C) 2014 Joakim Söderberg <joakim.soderberg@gmail.com>
	#
	# This is intended to be run by a custom target in a CMake project like this.
	# 0. Compile program with coverage support.
	# 1. Clear coverage data. (Recursively delete *.gcda in build dir)
	# 2. Run the unit tests.
	# 3. Run this script specifying which source files the coverage should be performed on.
	#
	# This script will then use gcov to generate .gcov files in the directory specified
	# via the COV_PATH var. This should probably be the same as your cmake build dir.
	#
	# It then parses the .gcov files to convert them into the Coveralls JSON format:
	# https://coveralls.io/docs/api
	#
	# Example for running as standalone CMake script from the command line:
	# (Note it is important the -P is at the end...)
	# $ cmake -DCOV_PATH=$(pwd)
	# -DCOVERAGE_SRCS="catcierge_rfid.c;catcierge_timer.c"
	# -P ../cmake/CoverallsGcovUpload.cmake
	#
	CMAKE_MINIMUM_REQUIRED(VERSION 2.8)


	#
	# Make sure we have the needed arguments.
	#
	if (NOT COVERALLS_OUTPUT_FILE)
	message(FATAL_ERROR "Coveralls: No coveralls output file specified. Please set COVERALLS_OUTPUT_FILE")
	endif()

	if (NOT COV_PATH)
	message(FATAL_ERROR "Coveralls: Missing coverage directory path where gcov files will be generated. Please set COV_PATH")
	endif()

	if (NOT COVERAGE_SRCS)
	message(FATAL_ERROR "Coveralls: Missing the list of source files that we should get the coverage data for COVERAGE_SRCS")
	endif()

	if (NOT PROJECT_ROOT)
	message(FATAL_ERROR "Coveralls: Missing PROJECT_ROOT.")
	endif()

	# Since it's not possible to pass a CMake list properly in the
	# "1;2;3" format to an external process, we have replaced the
	# ";" with "*", so reverse that here so we get it back into the
	# CMake list format.
	string(REGEX REPLACE "\\*" ";" COVERAGE_SRCS ${COVERAGE_SRCS})

	find_program(GCOV_EXECUTABLE gcov)

	if (NOT GCOV_EXECUTABLE)
	message(FATAL_ERROR "gcov not found! Aborting...")
	endif()

	find_package(Git)

	# TODO: Add these git things to the coveralls json.
	if (GIT_FOUND)
	# Branch.
	execute_process(
	COMMAND ${GIT_EXECUTABLE} rev-parse --abbrev-ref HEAD
	WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
	OUTPUT_VARIABLE GIT_BRANCH
	OUTPUT_STRIP_TRAILING_WHITESPACE
	)

	macro (git_log_format FORMAT_CHARS VAR_NAME)
	execute_process(
	COMMAND ${GIT_EXECUTABLE} log -1 --pretty=format:%${FORMAT_CHARS}
	WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
	OUTPUT_VARIABLE ${VAR_NAME}
	OUTPUT_STRIP_TRAILING_WHITESPACE
	)
	endmacro()

	git_log_format(an GIT_AUTHOR_EMAIL)
	git_log_format(ae GIT_AUTHOR_EMAIL)
	git_log_format(cn GIT_COMMITTER_NAME)
	git_log_format(ce GIT_COMMITTER_EMAIL)
	git_log_format(B GIT_COMMIT_MESSAGE)

	message("Git exe: ${GIT_EXECUTABLE}")
	message("Git branch: ${GIT_BRANCH}")
	message("Git author: ${GIT_AUTHOR_NAME}")
	message("Git e-mail: ${GIT_AUTHOR_EMAIL}")
	message("Git commiter name: ${GIT_COMMITTER_NAME}")
	message("Git commiter e-mail: ${GIT_COMMITTER_EMAIL}")
	message("Git commit message: ${GIT_COMMIT_MESSAGE}")

	endif()

	############################# Macros #########################################

	#
	# This macro converts from the full path format gcov outputs:
	#
	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
	#
	# to the original source file path the .gcov is for:
	#
	# /path/to/project/root/subdir/the_file.c
	#
	macro(get_source_path_from_gcov_filename _SRC_FILENAME _GCOV_FILENAME)

	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
	# ->
	# #path#to#project#root#subdir#the_file.c.gcov
	get_filename_component(_GCOV_FILENAME_WEXT ${_GCOV_FILENAME} NAME)

	# #path#to#project#root#subdir#the_file.c.gcov -> /path/to/project/root/subdir/the_file.c
	string(REGEX REPLACE "\\.gcov$" "" SRC_FILENAME_TMP ${_GCOV_FILENAME_WEXT})
	string(REGEX REPLACE "\#" "/" SRC_FILENAME_TMP ${SRC_FILENAME_TMP})
	set(${_SRC_FILENAME} "${SRC_FILENAME_TMP}")
	endmacro()

	##############################################################################

	# Get the coverage data.
	file(GLOB_RECURSE GCDA_FILES "${COV_PATH}/*.gcda")
	message("GCDA files:")

	# Get a list of all the object directories needed by gcov
	# (The directories the .gcda files and .o files are found in)
	# and run gcov on those.
	foreach(GCDA ${GCDA_FILES})
	message("Process: ${GCDA}")
	message("------------------------------------------------------------------------------")
	get_filename_component(GCDA_DIR ${GCDA} PATH)

	#
	# The -p below refers to "Preserve path components",
	# This means that the generated gcov filename of a source file will
	# keep the original files entire filepath, but / is replaced with #.
	# Example:
	#
	# /path/to/project/root/build/CMakeFiles/the_file.dir/subdir/the_file.c.gcda
	# ------------------------------------------------------------------------------
	# File '/path/to/project/root/subdir/the_file.c'
	# Lines executed:68.34% of 199
	# /path/to/project/root/subdir/the_file.c:creating '#path#to#project#root#subdir#the_file.c.gcov'
	#
	# If -p is not specified then the file is named only "the_file.c.gcov"
	#
	execute_process(
	COMMAND ${GCOV_EXECUTABLE} -c -p -o ${GCDA_DIR} ${GCDA}
	WORKING_DIRECTORY ${COV_PATH}
	)
	endforeach()

	# TODO: Make these be absolute path
	file(GLOB ALL_GCOV_FILES ${COV_PATH}/*.gcov)

	# Get only the filenames to use for filtering.
	#set(COVERAGE_SRCS_NAMES "")
	#foreach (COVSRC ${COVERAGE_SRCS})
	# get_filename_component(COVSRC_NAME ${COVSRC} NAME)
	# message("${COVSRC} -> ${COVSRC_NAME}")
	# list(APPEND COVERAGE_SRCS_NAMES "${COVSRC_NAME}")
	#endforeach()

	#
	# Filter out all but the gcov files we want.
	#
	# We do this by comparing the list of COVERAGE_SRCS filepaths that the
	# user wants the coverage data for with the paths of the generated .gcov files,
	# so that we only keep the relevant gcov files.
	#
	# Example:
	# COVERAGE_SRCS =
	# /path/to/project/root/subdir/the_file.c
	#
	# ALL_GCOV_FILES =
	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
	# /path/to/project/root/build/#path#to#project#root#subdir#other_file.c.gcov
	#
	# Result should be:
	# GCOV_FILES =
	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
	#
	set(GCOV_FILES "")
	#message("Look in coverage sources: ${COVERAGE_SRCS}")
	message("\nFilter out unwanted GCOV files:")
	message("===============================")

	set(COVERAGE_SRCS_REMAINING ${COVERAGE_SRCS})

	foreach (GCOV_FILE ${ALL_GCOV_FILES})

	#
	# /path/to/project/root/build/#path#to#project#root#subdir#the_file.c.gcov
	# ->
	# /path/to/project/root/subdir/the_file.c
	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})

	# Is this in the list of source files?
	# TODO: We want to match against relative path filenames from the source file root...
	list(FIND COVERAGE_SRCS ${GCOV_SRC_PATH} WAS_FOUND)

	if (NOT WAS_FOUND EQUAL -1)
	message("YES: ${GCOV_FILE}")
	list(APPEND GCOV_FILES ${GCOV_FILE})

	# We remove it from the list, so we don't bother searching for it again.
	# Also files left in COVERAGE_SRCS_REMAINING after this loop ends should
	# have coverage data generated from them (no lines are covered).
	list(REMOVE_ITEM COVERAGE_SRCS_REMAINING ${GCOV_SRC_PATH})
	else()
	message("NO: ${GCOV_FILE}")
	endif()
	endforeach()

	# TODO: Enable setting these
	set(JSON_SERVICE_NAME "travis-ci")
	set(JSON_SERVICE_JOB_ID $ENV{TRAVIS_JOB_ID})

	set(JSON_TEMPLATE
	"{
	\"service_name\": \"\@JSON_SERVICE_NAME\@\",
	\"service_job_id\": \"\@JSON_SERVICE_JOB_ID\@\",
	\"source_files\": \@JSON_GCOV_FILES\@
	}"
	)

	set(SRC_FILE_TEMPLATE
	"{
	\"name\": \"\@GCOV_SRC_REL_PATH\@\",
	\"source_digest\": \"\@GCOV_CONTENTS_MD5\@\",
	\"coverage\": \@GCOV_FILE_COVERAGE\@
	}"
	)

	message("\nGenerate JSON for files:")
	message("=========================")

	set(JSON_GCOV_FILES "[")

	# Read the GCOV files line by line and get the coverage data.
	foreach (GCOV_FILE ${GCOV_FILES})

	get_source_path_from_gcov_filename(GCOV_SRC_PATH ${GCOV_FILE})
	file(RELATIVE_PATH GCOV_SRC_REL_PATH "${PROJECT_ROOT}" "${GCOV_SRC_PATH}")

	# The new coveralls API doesn't need the entire source (Yay!)
	# However, still keeping that part for now. Will cleanup in the future.
	file(MD5 "${GCOV_SRC_PATH}" GCOV_CONTENTS_MD5)
	message("MD5: ${GCOV_SRC_PATH} = ${GCOV_CONTENTS_MD5}")

	# Loads the gcov file as a list of lines.
	# (We first open the file and replace all occurences of [] with _
	# because CMake will fail to parse a line containing unmatched brackets...
	# also the \ to escaped \n in macros screws up things.)
	# https://public.kitware.com/Bug/view.php?id=15369
	file(READ ${GCOV_FILE} GCOV_CONTENTS)
	string(REPLACE "[" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
	string(REPLACE "]" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
	string(REPLACE "\\" "_" GCOV_CONTENTS "${GCOV_CONTENTS}")
	file(WRITE ${GCOV_FILE}_tmp "${GCOV_CONTENTS}")

	file(STRINGS ${GCOV_FILE}_tmp GCOV_LINES)
	list(LENGTH GCOV_LINES LINE_COUNT)

	# Instead of trying to parse the source from the
	# gcov file, simply read the file contents from the source file.
	# (Parsing it from the gcov is hard because C-code uses ; in many places
	# which also happens to be the same as the CMake list delimeter).
	file(READ ${GCOV_SRC_PATH} GCOV_FILE_SOURCE)

	string(REPLACE "\\" "\\\\" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REGEX REPLACE "\"" "\\\\\"" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\t" "\\\\t" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\r" "\\\\r" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	string(REPLACE "\n" "\\\\n" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	# According to http://json.org/ these should be escaped as well.
	# Don't know how to do that in CMake however...
	#string(REPLACE "\b" "\\\\b" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	#string(REPLACE "\f" "\\\\f" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")
	#string(REGEX REPLACE "\u([a-fA-F0-9]{4})" "\\\\u\\1" GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}")

	# We want a json array of coverage data as a single string
	# start building them from the contents of the .gcov
	set(GCOV_FILE_COVERAGE "[")

	set(GCOV_LINE_COUNT 1) # Line number for the .gcov.
	set(DO_SKIP 0)
	foreach (GCOV_LINE ${GCOV_LINES})
	#message("${GCOV_LINE}")
	# Example of what we're parsing:
	# Hitcount \|Line \| Source
	# " 8: 26: if (!allowed \|\| (strlen(allowed) == 0))"
	string(REGEX REPLACE
	"^([^:]):([^:]):(.*)$"
	"\\1;\\2;\\3"
	RES
	"${GCOV_LINE}")

	# Check if we should exclude lines using the Lcov syntax.
	string(REGEX MATCH "LCOV_EXCL_START" START_SKIP "${GCOV_LINE}")
	string(REGEX MATCH "LCOV_EXCL_END" END_SKIP "${GCOV_LINE}")
	string(REGEX MATCH "LCOV_EXCL_LINE" LINE_SKIP "${GCOV_LINE}")

	set(RESET_SKIP 0)
	if (LINE_SKIP AND NOT DO_SKIP)
	set(DO_SKIP 1)
	set(RESET_SKIP 1)
	endif()

	if (START_SKIP)
	set(DO_SKIP 1)
	message("${GCOV_LINE_COUNT}: Start skip")
	endif()

	if (END_SKIP)
	set(DO_SKIP 0)
	endif()

	list(LENGTH RES RES_COUNT)

	if (RES_COUNT GREATER 2)
	list(GET RES 0 HITCOUNT)
	list(GET RES 1 LINE)
	list(GET RES 2 SOURCE)

	string(STRIP ${HITCOUNT} HITCOUNT)
	string(STRIP ${LINE} LINE)

	# Lines with 0 line numbers are metadata and can be ignored.
	if (NOT ${LINE} EQUAL 0)

	if (DO_SKIP)
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
	else()
	# Translate the hitcount into valid JSON values.
	if (${HITCOUNT} STREQUAL "#####")
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")
	elseif (${HITCOUNT} STREQUAL "-")
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}null, ")
	else()
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}${HITCOUNT}, ")
	endif()
	endif()
	endif()
	else()
	message(WARNING "Failed to properly parse line (RES_COUNT = ${RES_COUNT}) ${GCOV_FILE}:${GCOV_LINE_COUNT}\n-->${GCOV_LINE}")
	endif()

	if (RESET_SKIP)
	set(DO_SKIP 0)
	endif()
	math(EXPR GCOV_LINE_COUNT "${GCOV_LINE_COUNT}+1")
	endforeach()

	message("${GCOV_LINE_COUNT} of ${LINE_COUNT} lines read!")

	# Advanced way of removing the trailing comma in the JSON array.
	# "[1, 2, 3, " -> "[1, 2, 3"
	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})

	# Append the trailing ] to complete the JSON array.
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

	# Generate the final JSON for this file.
	message("Generate JSON for file: ${GCOV_SRC_REL_PATH}...")
	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)

	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
	endforeach()

	# Loop through all files we couldn't find any coverage for
	# as well, and generate JSON for those as well with 0% coverage.
	foreach(NOT_COVERED_SRC ${COVERAGE_SRCS_REMAINING})

	# Loads the source file as a list of lines.
	file(STRINGS ${NOT_COVERED_SRC} SRC_LINES)

	set(GCOV_FILE_COVERAGE "[")
	set(GCOV_FILE_SOURCE "")

	foreach (SOURCE ${SRC_LINES})
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}0, ")

	string(REPLACE "\\" "\\\\" SOURCE "${SOURCE}")
	string(REGEX REPLACE "\"" "\\\\\"" SOURCE "${SOURCE}")
	string(REPLACE "\t" "\\\\t" SOURCE "${SOURCE}")
	string(REPLACE "\r" "\\\\r" SOURCE "${SOURCE}")
	set(GCOV_FILE_SOURCE "${GCOV_FILE_SOURCE}${SOURCE}\\n")
	endforeach()

	# Remove trailing comma, and complete JSON array with ]
	string(REGEX REPLACE ",[ ]*$" "" GCOV_FILE_COVERAGE ${GCOV_FILE_COVERAGE})
	set(GCOV_FILE_COVERAGE "${GCOV_FILE_COVERAGE}]")

	# Generate the final JSON for this file.
	message("Generate JSON for non-gcov file: ${NOT_COVERED_SRC}...")
	string(CONFIGURE ${SRC_FILE_TEMPLATE} FILE_JSON)
	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}${FILE_JSON}, ")
	endforeach()

	# Get rid of trailing comma.
	string(REGEX REPLACE ",[ ]*$" "" JSON_GCOV_FILES ${JSON_GCOV_FILES})
	set(JSON_GCOV_FILES "${JSON_GCOV_FILES}]")

	# Generate the final complete JSON!
	message("Generate final JSON...")
	string(CONFIGURE ${JSON_TEMPLATE} JSON)

	file(WRITE "${COVERALLS_OUTPUT_FILE}" "${JSON}")
	message("###########################################################################")
	message("Generated coveralls JSON containing coverage data:")
	message("${COVERALLS_OUTPUT_FILE}")
	message("###########################################################################")