| /* Common parts of the nanopb library. Most of these are quite low-level |
| * stuff. For the high-level interface, see pb_encode.h and pb_decode.h. |
| */ |
| |
| #ifndef PB_H_INCLUDED |
| #define PB_H_INCLUDED |
| |
| /***************************************************************** |
| * Nanopb compilation time options. You can change these here by * |
| * uncommenting the lines, or on the compiler command line. * |
| *****************************************************************/ |
| |
| /* Enable support for dynamically allocated fields */ |
| /* #define PB_ENABLE_MALLOC 1 */ |
| |
| /* Define this if your CPU / compiler combination does not support |
| * unaligned memory access to packed structures. Note that packed |
| * structures are only used when requested in .proto options. */ |
| /* #define PB_NO_PACKED_STRUCTS 1 */ |
| |
| /* Increase the number of required fields that are tracked. |
| * A compiler warning will tell if you need this. */ |
| /* #define PB_MAX_REQUIRED_FIELDS 256 */ |
| |
| /* Add support for tag numbers > 65536 and fields larger than 65536 bytes. */ |
| /* #define PB_FIELD_32BIT 1 */ |
| |
| /* Disable support for error messages in order to save some code space. */ |
| /* #define PB_NO_ERRMSG 1 */ |
| |
| /* Disable support for custom streams (support only memory buffers). */ |
| /* #define PB_BUFFER_ONLY 1 */ |
| |
| /* Disable support for 64-bit datatypes, for compilers without int64_t |
| or to save some code space. */ |
| /* #define PB_WITHOUT_64BIT 1 */ |
| |
| /* Don't encode scalar arrays as packed. This is only to be used when |
| * the decoder on the receiving side cannot process packed scalar arrays. |
| * Such example is older protobuf.js. */ |
| /* #define PB_ENCODE_ARRAYS_UNPACKED 1 */ |
| |
| /* Enable conversion of doubles to floats for platforms that do not |
| * support 64-bit doubles. Most commonly AVR. */ |
| /* #define PB_CONVERT_DOUBLE_FLOAT 1 */ |
| |
| /* Check whether incoming strings are valid UTF-8 sequences. Slows down |
| * the string processing slightly and slightly increases code size. */ |
| /* #define PB_VALIDATE_UTF8 1 */ |
| |
| /* This can be defined if the platform is little-endian and has 8-bit bytes. |
| * Normally it is automatically detected based on __BYTE_ORDER__ macro. */ |
| /* #define PB_LITTLE_ENDIAN_8BIT 1 */ |
| |
| /* Configure static assert mechanism. Instead of changing these, set your |
| * compiler to C11 standard mode if possible. */ |
| /* #define PB_C99_STATIC_ASSERT 1 */ |
| /* #define PB_NO_STATIC_ASSERT 1 */ |
| |
| /****************************************************************** |
| * You usually don't need to change anything below this line. * |
| * Feel free to look around and use the defined macros, though. * |
| ******************************************************************/ |
| |
| |
| /* Version of the nanopb library. Just in case you want to check it in |
| * your own program. */ |
| #define NANOPB_VERSION "nanopb-0.4.7-dev" |
| |
| /* Include all the system headers needed by nanopb. You will need the |
| * definitions of the following: |
| * - strlen, memcpy, memset functions |
| * - [u]int_least8_t, uint_fast8_t, [u]int_least16_t, [u]int32_t, [u]int64_t |
| * - size_t |
| * - bool |
| * |
| * If you don't have the standard header files, you can instead provide |
| * a custom header that defines or includes all this. In that case, |
| * define PB_SYSTEM_HEADER to the path of this file. |
| */ |
| #ifdef PB_SYSTEM_HEADER |
| #include PB_SYSTEM_HEADER |
| #else |
| #include <stdint.h> |
| #include <stddef.h> |
| #include <stdbool.h> |
| #include <string.h> |
| #include <limits.h> |
| |
| #ifdef PB_ENABLE_MALLOC |
| #include <stdlib.h> |
| #endif |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Macro for defining packed structures (compiler dependent). |
| * This just reduces memory requirements, but is not required. |
| */ |
| #if defined(PB_NO_PACKED_STRUCTS) |
| /* Disable struct packing */ |
| # define PB_PACKED_STRUCT_START |
| # define PB_PACKED_STRUCT_END |
| # define pb_packed |
| #elif defined(__GNUC__) || defined(__clang__) |
| /* For GCC and clang */ |
| # define PB_PACKED_STRUCT_START |
| # define PB_PACKED_STRUCT_END |
| # define pb_packed __attribute__((packed)) |
| #elif defined(__ICCARM__) || defined(__CC_ARM) |
| /* For IAR ARM and Keil MDK-ARM compilers */ |
| # define PB_PACKED_STRUCT_START _Pragma("pack(push, 1)") |
| # define PB_PACKED_STRUCT_END _Pragma("pack(pop)") |
| # define pb_packed |
| #elif defined(_MSC_VER) && (_MSC_VER >= 1500) |
| /* For Microsoft Visual C++ */ |
| # define PB_PACKED_STRUCT_START __pragma(pack(push, 1)) |
| # define PB_PACKED_STRUCT_END __pragma(pack(pop)) |
| # define pb_packed |
| #else |
| /* Unknown compiler */ |
| # define PB_PACKED_STRUCT_START |
| # define PB_PACKED_STRUCT_END |
| # define pb_packed |
| #endif |
| |
| /* Detect endianness */ |
| #ifndef PB_LITTLE_ENDIAN_8BIT |
| #if ((defined(__BYTE_ORDER) && __BYTE_ORDER == __LITTLE_ENDIAN) || \ |
| (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__) || \ |
| defined(__LITTLE_ENDIAN__) || defined(__ARMEL__) || \ |
| defined(__THUMBEL__) || defined(__AARCH64EL__) || defined(_MIPSEL) || \ |
| defined(_M_IX86) || defined(_M_X64) || defined(_M_ARM)) \ |
| && CHAR_BIT == 8 |
| #define PB_LITTLE_ENDIAN_8BIT 1 |
| #endif |
| #endif |
| |
| /* Handly macro for suppressing unreferenced-parameter compiler warnings. */ |
| #ifndef PB_UNUSED |
| #define PB_UNUSED(x) (void)(x) |
| #endif |
| |
| /* Harvard-architecture processors may need special attributes for storing |
| * field information in program memory. */ |
| #ifndef PB_PROGMEM |
| #ifdef __AVR__ |
| #include <avr/pgmspace.h> |
| #define PB_PROGMEM PROGMEM |
| #define PB_PROGMEM_READU32(x) pgm_read_dword(&x) |
| #else |
| #define PB_PROGMEM |
| #define PB_PROGMEM_READU32(x) (x) |
| #endif |
| #endif |
| |
| /* Compile-time assertion, used for checking compatible compilation options. |
| * If this does not work properly on your compiler, use |
| * #define PB_NO_STATIC_ASSERT to disable it. |
| * |
| * But before doing that, check carefully the error message / place where it |
| * comes from to see if the error has a real cause. Unfortunately the error |
| * message is not always very clear to read, but you can see the reason better |
| * in the place where the PB_STATIC_ASSERT macro was called. |
| */ |
| #ifndef PB_NO_STATIC_ASSERT |
| # ifndef PB_STATIC_ASSERT |
| # if defined(__ICCARM__) |
| /* IAR has static_assert keyword but no _Static_assert */ |
| # define PB_STATIC_ASSERT(COND,MSG) static_assert(COND,#MSG); |
| # elif defined(PB_C99_STATIC_ASSERT) |
| /* Classic negative-size-array static assert mechanism */ |
| # define PB_STATIC_ASSERT(COND,MSG) typedef char PB_STATIC_ASSERT_MSG(MSG, __LINE__, __COUNTER__)[(COND)?1:-1]; |
| # define PB_STATIC_ASSERT_MSG(MSG, LINE, COUNTER) PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) |
| # define PB_STATIC_ASSERT_MSG_(MSG, LINE, COUNTER) pb_static_assertion_##MSG##_##LINE##_##COUNTER |
| # elif defined(__cplusplus) |
| /* C++11 standard static_assert mechanism */ |
| # define PB_STATIC_ASSERT(COND,MSG) static_assert(COND,#MSG); |
| # else |
| /* C11 standard _Static_assert mechanism */ |
| # define PB_STATIC_ASSERT(COND,MSG) _Static_assert(COND,#MSG); |
| # endif |
| # endif |
| #else |
| /* Static asserts disabled by PB_NO_STATIC_ASSERT */ |
| # define PB_STATIC_ASSERT(COND,MSG) |
| #endif |
| |
| /* Test that PB_STATIC_ASSERT works |
| * If you get errors here, you may need to do one of these: |
| * - Enable C11 standard support in your compiler |
| * - Define PB_C99_STATIC_ASSERT to enable C99 standard support |
| * - Define PB_NO_STATIC_ASSERT to disable static asserts altogether |
| */ |
| PB_STATIC_ASSERT(1, STATIC_ASSERT_IS_NOT_WORKING) |
| |
| /* Number of required fields to keep track of. */ |
| #ifndef PB_MAX_REQUIRED_FIELDS |
| #define PB_MAX_REQUIRED_FIELDS 64 |
| #endif |
| |
| #if PB_MAX_REQUIRED_FIELDS < 64 |
| #error You should not lower PB_MAX_REQUIRED_FIELDS from the default value (64). |
| #endif |
| |
| #ifdef PB_WITHOUT_64BIT |
| #ifdef PB_CONVERT_DOUBLE_FLOAT |
| /* Cannot use doubles without 64-bit types */ |
| #undef PB_CONVERT_DOUBLE_FLOAT |
| #endif |
| #endif |
| |
| /* List of possible field types. These are used in the autogenerated code. |
| * Least-significant 4 bits tell the scalar type |
| * Most-significant 4 bits specify repeated/required/packed etc. |
| */ |
| |
| typedef uint_least8_t pb_type_t; |
| |
| /**** Field data types ****/ |
| |
| /* Numeric types */ |
| #define PB_LTYPE_BOOL 0x00U /* bool */ |
| #define PB_LTYPE_VARINT 0x01U /* int32, int64, enum, bool */ |
| #define PB_LTYPE_UVARINT 0x02U /* uint32, uint64 */ |
| #define PB_LTYPE_SVARINT 0x03U /* sint32, sint64 */ |
| #define PB_LTYPE_FIXED32 0x04U /* fixed32, sfixed32, float */ |
| #define PB_LTYPE_FIXED64 0x05U /* fixed64, sfixed64, double */ |
| |
| /* Marker for last packable field type. */ |
| #define PB_LTYPE_LAST_PACKABLE 0x05U |
| |
| /* Byte array with pre-allocated buffer. |
| * data_size is the length of the allocated PB_BYTES_ARRAY structure. */ |
| #define PB_LTYPE_BYTES 0x06U |
| |
| /* String with pre-allocated buffer. |
| * data_size is the maximum length. */ |
| #define PB_LTYPE_STRING 0x07U |
| |
| /* Submessage |
| * submsg_fields is pointer to field descriptions */ |
| #define PB_LTYPE_SUBMESSAGE 0x08U |
| |
| /* Submessage with pre-decoding callback |
| * The pre-decoding callback is stored as pb_callback_t right before pSize. |
| * submsg_fields is pointer to field descriptions */ |
| #define PB_LTYPE_SUBMSG_W_CB 0x09U |
| |
| /* Extension pseudo-field |
| * The field contains a pointer to pb_extension_t */ |
| #define PB_LTYPE_EXTENSION 0x0AU |
| |
| /* Byte array with inline, pre-allocated byffer. |
| * data_size is the length of the inline, allocated buffer. |
| * This differs from PB_LTYPE_BYTES by defining the element as |
| * pb_byte_t[data_size] rather than pb_bytes_array_t. */ |
| #define PB_LTYPE_FIXED_LENGTH_BYTES 0x0BU |
| |
| /* Number of declared LTYPES */ |
| #define PB_LTYPES_COUNT 0x0CU |
| #define PB_LTYPE_MASK 0x0FU |
| |
| /**** Field repetition rules ****/ |
| |
| #define PB_HTYPE_REQUIRED 0x00U |
| #define PB_HTYPE_OPTIONAL 0x10U |
| #define PB_HTYPE_SINGULAR 0x10U |
| #define PB_HTYPE_REPEATED 0x20U |
| #define PB_HTYPE_FIXARRAY 0x20U |
| #define PB_HTYPE_ONEOF 0x30U |
| #define PB_HTYPE_MASK 0x30U |
| |
| /**** Field allocation types ****/ |
| |
| #define PB_ATYPE_STATIC 0x00U |
| #define PB_ATYPE_POINTER 0x80U |
| #define PB_ATYPE_CALLBACK 0x40U |
| #define PB_ATYPE_MASK 0xC0U |
| |
| #define PB_ATYPE(x) ((x) & PB_ATYPE_MASK) |
| #define PB_HTYPE(x) ((x) & PB_HTYPE_MASK) |
| #define PB_LTYPE(x) ((x) & PB_LTYPE_MASK) |
| #define PB_LTYPE_IS_SUBMSG(x) (PB_LTYPE(x) == PB_LTYPE_SUBMESSAGE || \ |
| PB_LTYPE(x) == PB_LTYPE_SUBMSG_W_CB) |
| |
| /* Data type used for storing sizes of struct fields |
| * and array counts. |
| */ |
| #if defined(PB_FIELD_32BIT) |
| typedef uint32_t pb_size_t; |
| typedef int32_t pb_ssize_t; |
| #else |
| typedef uint_least16_t pb_size_t; |
| typedef int_least16_t pb_ssize_t; |
| #endif |
| #define PB_SIZE_MAX ((pb_size_t)-1) |
| |
| /* Data type for storing encoded data and other byte streams. |
| * This typedef exists to support platforms where uint8_t does not exist. |
| * You can regard it as equivalent on uint8_t on other platforms. |
| */ |
| typedef uint_least8_t pb_byte_t; |
| |
| /* Forward declaration of struct types */ |
| typedef struct pb_istream_s pb_istream_t; |
| typedef struct pb_ostream_s pb_ostream_t; |
| typedef struct pb_field_iter_s pb_field_iter_t; |
| |
| /* This structure is used in auto-generated constants |
| * to specify struct fields. |
| */ |
| typedef struct pb_msgdesc_s pb_msgdesc_t; |
| struct pb_msgdesc_s { |
| const uint32_t *field_info; |
| const pb_msgdesc_t * const * submsg_info; |
| const pb_byte_t *default_value; |
| |
| bool (*field_callback)(pb_istream_t *istream, pb_ostream_t *ostream, const pb_field_iter_t *field); |
| |
| pb_size_t field_count; |
| pb_size_t required_field_count; |
| pb_size_t largest_tag; |
| }; |
| |
| /* Iterator for message descriptor */ |
| struct pb_field_iter_s { |
| const pb_msgdesc_t *descriptor; /* Pointer to message descriptor constant */ |
| void *message; /* Pointer to start of the structure */ |
| |
| pb_size_t index; /* Index of the field */ |
| pb_size_t field_info_index; /* Index to descriptor->field_info array */ |
| pb_size_t required_field_index; /* Index that counts only the required fields */ |
| pb_size_t submessage_index; /* Index that counts only submessages */ |
| |
| pb_size_t tag; /* Tag of current field */ |
| pb_size_t data_size; /* sizeof() of a single item */ |
| pb_size_t array_size; /* Number of array entries */ |
| pb_type_t type; /* Type of current field */ |
| |
| void *pField; /* Pointer to current field in struct */ |
| void *pData; /* Pointer to current data contents. Different than pField for arrays and pointers. */ |
| void *pSize; /* Pointer to count/has field */ |
| |
| const pb_msgdesc_t *submsg_desc; /* For submessage fields, pointer to field descriptor for the submessage. */ |
| }; |
| |
| /* For compatibility with legacy code */ |
| typedef pb_field_iter_t pb_field_t; |
| |
| /* Make sure that the standard integer types are of the expected sizes. |
| * Otherwise fixed32/fixed64 fields can break. |
| * |
| * If you get errors here, it probably means that your stdint.h is not |
| * correct for your platform. |
| */ |
| #ifndef PB_WITHOUT_64BIT |
| PB_STATIC_ASSERT(sizeof(int64_t) == 2 * sizeof(int32_t), INT64_T_WRONG_SIZE) |
| PB_STATIC_ASSERT(sizeof(uint64_t) == 2 * sizeof(uint32_t), UINT64_T_WRONG_SIZE) |
| #endif |
| |
| /* This structure is used for 'bytes' arrays. |
| * It has the number of bytes in the beginning, and after that an array. |
| * Note that actual structs used will have a different length of bytes array. |
| */ |
| #define PB_BYTES_ARRAY_T(n) struct { pb_size_t size; pb_byte_t bytes[n]; } |
| #define PB_BYTES_ARRAY_T_ALLOCSIZE(n) ((size_t)n + offsetof(pb_bytes_array_t, bytes)) |
| |
| struct pb_bytes_array_s { |
| pb_size_t size; |
| pb_byte_t bytes[1]; |
| }; |
| typedef struct pb_bytes_array_s pb_bytes_array_t; |
| |
| /* This structure is used for giving the callback function. |
| * It is stored in the message structure and filled in by the method that |
| * calls pb_decode. |
| * |
| * The decoding callback will be given a limited-length stream |
| * If the wire type was string, the length is the length of the string. |
| * If the wire type was a varint/fixed32/fixed64, the length is the length |
| * of the actual value. |
| * The function may be called multiple times (especially for repeated types, |
| * but also otherwise if the message happens to contain the field multiple |
| * times.) |
| * |
| * The encoding callback will receive the actual output stream. |
| * It should write all the data in one call, including the field tag and |
| * wire type. It can write multiple fields. |
| * |
| * The callback can be null if you want to skip a field. |
| */ |
| typedef struct pb_callback_s pb_callback_t; |
| struct pb_callback_s { |
| /* Callback functions receive a pointer to the arg field. |
| * You can access the value of the field as *arg, and modify it if needed. |
| */ |
| union { |
| bool (*decode)(pb_istream_t *stream, const pb_field_t *field, void **arg); |
| bool (*encode)(pb_ostream_t *stream, const pb_field_t *field, void * const *arg); |
| } funcs; |
| |
| /* Free arg for use by callback */ |
| void *arg; |
| }; |
| |
| extern bool pb_default_field_callback(pb_istream_t *istream, pb_ostream_t *ostream, const pb_field_t *field); |
| |
| /* Wire types. Library user needs these only in encoder callbacks. */ |
| typedef enum { |
| PB_WT_VARINT = 0, |
| PB_WT_64BIT = 1, |
| PB_WT_STRING = 2, |
| PB_WT_32BIT = 5, |
| PB_WT_PACKED = 255 /* PB_WT_PACKED is internal marker for packed arrays. */ |
| } pb_wire_type_t; |
| |
| /* Structure for defining the handling of unknown/extension fields. |
| * Usually the pb_extension_type_t structure is automatically generated, |
| * while the pb_extension_t structure is created by the user. However, |
| * if you want to catch all unknown fields, you can also create a custom |
| * pb_extension_type_t with your own callback. |
| */ |
| typedef struct pb_extension_type_s pb_extension_type_t; |
| typedef struct pb_extension_s pb_extension_t; |
| struct pb_extension_type_s { |
| /* Called for each unknown field in the message. |
| * If you handle the field, read off all of its data and return true. |
| * If you do not handle the field, do not read anything and return true. |
| * If you run into an error, return false. |
| * Set to NULL for default handler. |
| */ |
| bool (*decode)(pb_istream_t *stream, pb_extension_t *extension, |
| uint32_t tag, pb_wire_type_t wire_type); |
| |
| /* Called once after all regular fields have been encoded. |
| * If you have something to write, do so and return true. |
| * If you do not have anything to write, just return true. |
| * If you run into an error, return false. |
| * Set to NULL for default handler. |
| */ |
| bool (*encode)(pb_ostream_t *stream, const pb_extension_t *extension); |
| |
| /* Free field for use by the callback. */ |
| const void *arg; |
| }; |
| |
| struct pb_extension_s { |
| /* Type describing the extension field. Usually you'll initialize |
| * this to a pointer to the automatically generated structure. */ |
| const pb_extension_type_t *type; |
| |
| /* Destination for the decoded data. This must match the datatype |
| * of the extension field. */ |
| void *dest; |
| |
| /* Pointer to the next extension handler, or NULL. |
| * If this extension does not match a field, the next handler is |
| * automatically called. */ |
| pb_extension_t *next; |
| |
| /* The decoder sets this to true if the extension was found. |
| * Ignored for encoding. */ |
| bool found; |
| }; |
| |
| #define pb_extension_init_zero {NULL,NULL,NULL,false} |
| |
| /* Memory allocation functions to use. You can define pb_realloc and |
| * pb_free to custom functions if you want. */ |
| #ifdef PB_ENABLE_MALLOC |
| # ifndef pb_realloc |
| # define pb_realloc(ptr, size) realloc(ptr, size) |
| # endif |
| # ifndef pb_free |
| # define pb_free(ptr) free(ptr) |
| # endif |
| #endif |
| |
| /* This is used to inform about need to regenerate .pb.h/.pb.c files. */ |
| #define PB_PROTO_HEADER_VERSION 40 |
| |
| /* These macros are used to declare pb_field_t's in the constant array. */ |
| /* Size of a structure member, in bytes. */ |
| #define pb_membersize(st, m) (sizeof ((st*)0)->m) |
| /* Number of entries in an array. */ |
| #define pb_arraysize(st, m) (pb_membersize(st, m) / pb_membersize(st, m[0])) |
| /* Delta from start of one member to the start of another member. */ |
| #define pb_delta(st, m1, m2) ((int)offsetof(st, m1) - (int)offsetof(st, m2)) |
| |
| /* Force expansion of macro value */ |
| #define PB_EXPAND(x) x |
| |
| /* Binding of a message field set into a specific structure */ |
| #define PB_BIND(msgname, structname, width) \ |
| const uint32_t structname ## _field_info[] PB_PROGMEM = \ |
| { \ |
| msgname ## _FIELDLIST(PB_GEN_FIELD_INFO_ ## width, structname) \ |
| 0 \ |
| }; \ |
| const pb_msgdesc_t* const structname ## _submsg_info[] = \ |
| { \ |
| msgname ## _FIELDLIST(PB_GEN_SUBMSG_INFO, structname) \ |
| NULL \ |
| }; \ |
| const pb_msgdesc_t structname ## _msg = \ |
| { \ |
| structname ## _field_info, \ |
| structname ## _submsg_info, \ |
| msgname ## _DEFAULT, \ |
| msgname ## _CALLBACK, \ |
| 0 msgname ## _FIELDLIST(PB_GEN_FIELD_COUNT, structname), \ |
| 0 msgname ## _FIELDLIST(PB_GEN_REQ_FIELD_COUNT, structname), \ |
| 0 msgname ## _FIELDLIST(PB_GEN_LARGEST_TAG, structname), \ |
| }; \ |
| msgname ## _FIELDLIST(PB_GEN_FIELD_INFO_ASSERT_ ## width, structname) |
| |
| #define PB_GEN_FIELD_COUNT(structname, atype, htype, ltype, fieldname, tag) +1 |
| #define PB_GEN_REQ_FIELD_COUNT(structname, atype, htype, ltype, fieldname, tag) \ |
| + (PB_HTYPE_ ## htype == PB_HTYPE_REQUIRED) |
| #define PB_GEN_LARGEST_TAG(structname, atype, htype, ltype, fieldname, tag) \ |
| * 0 + tag |
| |
| /* X-macro for generating the entries in struct_field_info[] array. */ |
| #define PB_GEN_FIELD_INFO_1(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_1(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_2(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_2(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_4(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_4(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_8(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_8(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_AUTO(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_AUTO2(PB_FIELDINFO_WIDTH_AUTO(_PB_ATYPE_ ## atype, _PB_HTYPE_ ## htype, _PB_LTYPE_ ## ltype), \ |
| tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_FIELDINFO_AUTO2(width, tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_FIELDINFO_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) |
| |
| #define PB_FIELDINFO_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_FIELDINFO_ ## width(tag, type, data_offset, data_size, size_offset, array_size) |
| |
| /* X-macro for generating asserts that entries fit in struct_field_info[] array. |
| * The structure of macros here must match the structure above in PB_GEN_FIELD_INFO_x(), |
| * but it is not easily reused because of how macro substitutions work. */ |
| #define PB_GEN_FIELD_INFO_ASSERT_1(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_ASSERT_1(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_ASSERT_2(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_ASSERT_2(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_ASSERT_4(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_ASSERT_4(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_ASSERT_8(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_ASSERT_8(tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_GEN_FIELD_INFO_ASSERT_AUTO(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_FIELDINFO_ASSERT_AUTO2(PB_FIELDINFO_WIDTH_AUTO(_PB_ATYPE_ ## atype, _PB_HTYPE_ ## htype, _PB_LTYPE_ ## ltype), \ |
| tag, PB_ATYPE_ ## atype | PB_HTYPE_ ## htype | PB_LTYPE_MAP_ ## ltype, \ |
| PB_DATA_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_DATA_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_SIZE_OFFSET_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname), \ |
| PB_ARRAY_SIZE_ ## atype(_PB_HTYPE_ ## htype, structname, fieldname)) |
| |
| #define PB_FIELDINFO_ASSERT_AUTO2(width, tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_FIELDINFO_ASSERT_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) |
| |
| #define PB_FIELDINFO_ASSERT_AUTO3(width, tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_FIELDINFO_ASSERT_ ## width(tag, type, data_offset, data_size, size_offset, array_size) |
| |
| #define PB_DATA_OFFSET_STATIC(htype, structname, fieldname) PB_DO ## htype(structname, fieldname) |
| #define PB_DATA_OFFSET_POINTER(htype, structname, fieldname) PB_DO ## htype(structname, fieldname) |
| #define PB_DATA_OFFSET_CALLBACK(htype, structname, fieldname) PB_DO ## htype(structname, fieldname) |
| #define PB_DO_PB_HTYPE_REQUIRED(structname, fieldname) offsetof(structname, fieldname) |
| #define PB_DO_PB_HTYPE_SINGULAR(structname, fieldname) offsetof(structname, fieldname) |
| #define PB_DO_PB_HTYPE_ONEOF(structname, fieldname) offsetof(structname, PB_ONEOF_NAME(FULL, fieldname)) |
| #define PB_DO_PB_HTYPE_OPTIONAL(structname, fieldname) offsetof(structname, fieldname) |
| #define PB_DO_PB_HTYPE_REPEATED(structname, fieldname) offsetof(structname, fieldname) |
| #define PB_DO_PB_HTYPE_FIXARRAY(structname, fieldname) offsetof(structname, fieldname) |
| |
| #define PB_SIZE_OFFSET_STATIC(htype, structname, fieldname) PB_SO ## htype(structname, fieldname) |
| #define PB_SIZE_OFFSET_POINTER(htype, structname, fieldname) PB_SO_PTR ## htype(structname, fieldname) |
| #define PB_SIZE_OFFSET_CALLBACK(htype, structname, fieldname) PB_SO_CB ## htype(structname, fieldname) |
| #define PB_SO_PB_HTYPE_REQUIRED(structname, fieldname) 0 |
| #define PB_SO_PB_HTYPE_SINGULAR(structname, fieldname) 0 |
| #define PB_SO_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF2(structname, PB_ONEOF_NAME(FULL, fieldname), PB_ONEOF_NAME(UNION, fieldname)) |
| #define PB_SO_PB_HTYPE_ONEOF2(structname, fullname, unionname) PB_SO_PB_HTYPE_ONEOF3(structname, fullname, unionname) |
| #define PB_SO_PB_HTYPE_ONEOF3(structname, fullname, unionname) pb_delta(structname, fullname, which_ ## unionname) |
| #define PB_SO_PB_HTYPE_OPTIONAL(structname, fieldname) pb_delta(structname, fieldname, has_ ## fieldname) |
| #define PB_SO_PB_HTYPE_REPEATED(structname, fieldname) pb_delta(structname, fieldname, fieldname ## _count) |
| #define PB_SO_PB_HTYPE_FIXARRAY(structname, fieldname) 0 |
| #define PB_SO_PTR_PB_HTYPE_REQUIRED(structname, fieldname) 0 |
| #define PB_SO_PTR_PB_HTYPE_SINGULAR(structname, fieldname) 0 |
| #define PB_SO_PTR_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF(structname, fieldname) |
| #define PB_SO_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) 0 |
| #define PB_SO_PTR_PB_HTYPE_REPEATED(structname, fieldname) PB_SO_PB_HTYPE_REPEATED(structname, fieldname) |
| #define PB_SO_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) 0 |
| #define PB_SO_CB_PB_HTYPE_REQUIRED(structname, fieldname) 0 |
| #define PB_SO_CB_PB_HTYPE_SINGULAR(structname, fieldname) 0 |
| #define PB_SO_CB_PB_HTYPE_ONEOF(structname, fieldname) PB_SO_PB_HTYPE_ONEOF(structname, fieldname) |
| #define PB_SO_CB_PB_HTYPE_OPTIONAL(structname, fieldname) 0 |
| #define PB_SO_CB_PB_HTYPE_REPEATED(structname, fieldname) 0 |
| #define PB_SO_CB_PB_HTYPE_FIXARRAY(structname, fieldname) 0 |
| |
| #define PB_ARRAY_SIZE_STATIC(htype, structname, fieldname) PB_AS ## htype(structname, fieldname) |
| #define PB_ARRAY_SIZE_POINTER(htype, structname, fieldname) PB_AS_PTR ## htype(structname, fieldname) |
| #define PB_ARRAY_SIZE_CALLBACK(htype, structname, fieldname) 1 |
| #define PB_AS_PB_HTYPE_REQUIRED(structname, fieldname) 1 |
| #define PB_AS_PB_HTYPE_SINGULAR(structname, fieldname) 1 |
| #define PB_AS_PB_HTYPE_OPTIONAL(structname, fieldname) 1 |
| #define PB_AS_PB_HTYPE_ONEOF(structname, fieldname) 1 |
| #define PB_AS_PB_HTYPE_REPEATED(structname, fieldname) pb_arraysize(structname, fieldname) |
| #define PB_AS_PB_HTYPE_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname) |
| #define PB_AS_PTR_PB_HTYPE_REQUIRED(structname, fieldname) 1 |
| #define PB_AS_PTR_PB_HTYPE_SINGULAR(structname, fieldname) 1 |
| #define PB_AS_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) 1 |
| #define PB_AS_PTR_PB_HTYPE_ONEOF(structname, fieldname) 1 |
| #define PB_AS_PTR_PB_HTYPE_REPEATED(structname, fieldname) 1 |
| #define PB_AS_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) pb_arraysize(structname, fieldname[0]) |
| |
| #define PB_DATA_SIZE_STATIC(htype, structname, fieldname) PB_DS ## htype(structname, fieldname) |
| #define PB_DATA_SIZE_POINTER(htype, structname, fieldname) PB_DS_PTR ## htype(structname, fieldname) |
| #define PB_DATA_SIZE_CALLBACK(htype, structname, fieldname) PB_DS_CB ## htype(structname, fieldname) |
| #define PB_DS_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname)) |
| #define PB_DS_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PTR_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PTR_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PTR_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PTR_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname)[0]) |
| #define PB_DS_PTR_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname[0]) |
| #define PB_DS_PTR_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname[0][0]) |
| #define PB_DS_CB_PB_HTYPE_REQUIRED(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_CB_PB_HTYPE_SINGULAR(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_CB_PB_HTYPE_OPTIONAL(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_CB_PB_HTYPE_ONEOF(structname, fieldname) pb_membersize(structname, PB_ONEOF_NAME(FULL, fieldname)) |
| #define PB_DS_CB_PB_HTYPE_REPEATED(structname, fieldname) pb_membersize(structname, fieldname) |
| #define PB_DS_CB_PB_HTYPE_FIXARRAY(structname, fieldname) pb_membersize(structname, fieldname) |
| |
| #define PB_ONEOF_NAME(type, tuple) PB_EXPAND(PB_ONEOF_NAME_ ## type tuple) |
| #define PB_ONEOF_NAME_UNION(unionname,membername,fullname) unionname |
| #define PB_ONEOF_NAME_MEMBER(unionname,membername,fullname) membername |
| #define PB_ONEOF_NAME_FULL(unionname,membername,fullname) fullname |
| |
| #define PB_GEN_SUBMSG_INFO(structname, atype, htype, ltype, fieldname, tag) \ |
| PB_SUBMSG_INFO_ ## htype(_PB_LTYPE_ ## ltype, structname, fieldname) |
| |
| #define PB_SUBMSG_INFO_REQUIRED(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE) |
| #define PB_SUBMSG_INFO_SINGULAR(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE) |
| #define PB_SUBMSG_INFO_OPTIONAL(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE) |
| #define PB_SUBMSG_INFO_ONEOF(ltype, structname, fieldname) PB_SUBMSG_INFO_ONEOF2(ltype, structname, PB_ONEOF_NAME(UNION, fieldname), PB_ONEOF_NAME(MEMBER, fieldname)) |
| #define PB_SUBMSG_INFO_ONEOF2(ltype, structname, unionname, membername) PB_SUBMSG_INFO_ONEOF3(ltype, structname, unionname, membername) |
| #define PB_SUBMSG_INFO_ONEOF3(ltype, structname, unionname, membername) PB_SI ## ltype(structname ## _ ## unionname ## _ ## membername ## _MSGTYPE) |
| #define PB_SUBMSG_INFO_REPEATED(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE) |
| #define PB_SUBMSG_INFO_FIXARRAY(ltype, structname, fieldname) PB_SI ## ltype(structname ## _ ## fieldname ## _MSGTYPE) |
| #define PB_SI_PB_LTYPE_BOOL(t) |
| #define PB_SI_PB_LTYPE_BYTES(t) |
| #define PB_SI_PB_LTYPE_DOUBLE(t) |
| #define PB_SI_PB_LTYPE_ENUM(t) |
| #define PB_SI_PB_LTYPE_UENUM(t) |
| #define PB_SI_PB_LTYPE_FIXED32(t) |
| #define PB_SI_PB_LTYPE_FIXED64(t) |
| #define PB_SI_PB_LTYPE_FLOAT(t) |
| #define PB_SI_PB_LTYPE_INT32(t) |
| #define PB_SI_PB_LTYPE_INT64(t) |
| #define PB_SI_PB_LTYPE_MESSAGE(t) PB_SUBMSG_DESCRIPTOR(t) |
| #define PB_SI_PB_LTYPE_MSG_W_CB(t) PB_SUBMSG_DESCRIPTOR(t) |
| #define PB_SI_PB_LTYPE_SFIXED32(t) |
| #define PB_SI_PB_LTYPE_SFIXED64(t) |
| #define PB_SI_PB_LTYPE_SINT32(t) |
| #define PB_SI_PB_LTYPE_SINT64(t) |
| #define PB_SI_PB_LTYPE_STRING(t) |
| #define PB_SI_PB_LTYPE_UINT32(t) |
| #define PB_SI_PB_LTYPE_UINT64(t) |
| #define PB_SI_PB_LTYPE_EXTENSION(t) |
| #define PB_SI_PB_LTYPE_FIXED_LENGTH_BYTES(t) |
| #define PB_SUBMSG_DESCRIPTOR(t) &(t ## _msg), |
| |
| /* The field descriptors use a variable width format, with width of either |
| * 1, 2, 4 or 8 of 32-bit words. The two lowest bytes of the first byte always |
| * encode the descriptor size, 6 lowest bits of field tag number, and 8 bits |
| * of the field type. |
| * |
| * Descriptor size is encoded as 0 = 1 word, 1 = 2 words, 2 = 4 words, 3 = 8 words. |
| * |
| * Formats, listed starting with the least significant bit of the first word. |
| * 1 word: [2-bit len] [6-bit tag] [8-bit type] [8-bit data_offset] [4-bit size_offset] [4-bit data_size] |
| * |
| * 2 words: [2-bit len] [6-bit tag] [8-bit type] [12-bit array_size] [4-bit size_offset] |
| * [16-bit data_offset] [12-bit data_size] [4-bit tag>>6] |
| * |
| * 4 words: [2-bit len] [6-bit tag] [8-bit type] [16-bit array_size] |
| * [8-bit size_offset] [24-bit tag>>6] |
| * [32-bit data_offset] |
| * [32-bit data_size] |
| * |
| * 8 words: [2-bit len] [6-bit tag] [8-bit type] [16-bit reserved] |
| * [8-bit size_offset] [24-bit tag>>6] |
| * [32-bit data_offset] |
| * [32-bit data_size] |
| * [32-bit array_size] |
| * [32-bit reserved] |
| * [32-bit reserved] |
| * [32-bit reserved] |
| */ |
| |
| #define PB_FIELDINFO_1(tag, type, data_offset, data_size, size_offset, array_size) \ |
| (0 | (((tag) << 2) & 0xFF) | ((type) << 8) | (((uint32_t)(data_offset) & 0xFF) << 16) | \ |
| (((uint32_t)(size_offset) & 0x0F) << 24) | (((uint32_t)(data_size) & 0x0F) << 28)), |
| |
| #define PB_FIELDINFO_2(tag, type, data_offset, data_size, size_offset, array_size) \ |
| (1 | (((tag) << 2) & 0xFF) | ((type) << 8) | (((uint32_t)(array_size) & 0xFFF) << 16) | (((uint32_t)(size_offset) & 0x0F) << 28)), \ |
| (((uint32_t)(data_offset) & 0xFFFF) | (((uint32_t)(data_size) & 0xFFF) << 16) | (((uint32_t)(tag) & 0x3c0) << 22)), |
| |
| #define PB_FIELDINFO_4(tag, type, data_offset, data_size, size_offset, array_size) \ |
| (2 | (((tag) << 2) & 0xFF) | ((type) << 8) | (((uint32_t)(array_size) & 0xFFFF) << 16)), \ |
| ((uint32_t)(int_least8_t)(size_offset) | (((uint32_t)(tag) << 2) & 0xFFFFFF00)), \ |
| (data_offset), (data_size), |
| |
| #define PB_FIELDINFO_8(tag, type, data_offset, data_size, size_offset, array_size) \ |
| (3 | (((tag) << 2) & 0xFF) | ((type) << 8)), \ |
| ((uint32_t)(int_least8_t)(size_offset) | (((uint32_t)(tag) << 2) & 0xFFFFFF00)), \ |
| (data_offset), (data_size), (array_size), 0, 0, 0, |
| |
| /* These assertions verify that the field information fits in the allocated space. |
| * The generator tries to automatically determine the correct width that can fit all |
| * data associated with a message. These asserts will fail only if there has been a |
| * problem in the automatic logic - this may be worth reporting as a bug. As a workaround, |
| * you can increase the descriptor width by defining PB_FIELDINFO_WIDTH or by setting |
| * descriptorsize option in .options file. |
| */ |
| #define PB_FITS(value,bits) ((uint32_t)(value) < ((uint32_t)1<<bits)) |
| #define PB_FIELDINFO_ASSERT_1(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,6) && PB_FITS(data_offset,8) && PB_FITS(size_offset,4) && PB_FITS(data_size,4) && PB_FITS(array_size,1), FIELDINFO_DOES_NOT_FIT_width1_field ## tag) |
| |
| #define PB_FIELDINFO_ASSERT_2(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,10) && PB_FITS(data_offset,16) && PB_FITS(size_offset,4) && PB_FITS(data_size,12) && PB_FITS(array_size,12), FIELDINFO_DOES_NOT_FIT_width2_field ## tag) |
| |
| #ifndef PB_FIELD_32BIT |
| /* Maximum field sizes are still 16-bit if pb_size_t is 16-bit */ |
| #define PB_FIELDINFO_ASSERT_4(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,16) && PB_FITS(data_offset,16) && PB_FITS((int_least8_t)size_offset,8) && PB_FITS(data_size,16) && PB_FITS(array_size,16), FIELDINFO_DOES_NOT_FIT_width4_field ## tag) |
| |
| #define PB_FIELDINFO_ASSERT_8(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,16) && PB_FITS(data_offset,16) && PB_FITS((int_least8_t)size_offset,8) && PB_FITS(data_size,16) && PB_FITS(array_size,16), FIELDINFO_DOES_NOT_FIT_width8_field ## tag) |
| #else |
| /* Up to 32-bit fields supported. |
| * Note that the checks are against 31 bits to avoid compiler warnings about shift wider than type in the test. |
| * I expect that there is no reasonable use for >2GB messages with nanopb anyway. |
| */ |
| #define PB_FIELDINFO_ASSERT_4(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,30) && PB_FITS(data_offset,31) && PB_FITS(size_offset,8) && PB_FITS(data_size,31) && PB_FITS(array_size,16), FIELDINFO_DOES_NOT_FIT_width4_field ## tag) |
| |
| #define PB_FIELDINFO_ASSERT_8(tag, type, data_offset, data_size, size_offset, array_size) \ |
| PB_STATIC_ASSERT(PB_FITS(tag,30) && PB_FITS(data_offset,31) && PB_FITS(size_offset,8) && PB_FITS(data_size,31) && PB_FITS(array_size,31), FIELDINFO_DOES_NOT_FIT_width8_field ## tag) |
| #endif |
| |
| |
| /* Automatic picking of FIELDINFO width: |
| * Uses width 1 when possible, otherwise resorts to width 2. |
| * This is used when PB_BIND() is called with "AUTO" as the argument. |
| * The generator will give explicit size argument when it knows that a message |
| * structure grows beyond 1-word format limits. |
| */ |
| #define PB_FIELDINFO_WIDTH_AUTO(atype, htype, ltype) PB_FI_WIDTH ## atype(htype, ltype) |
| #define PB_FI_WIDTH_PB_ATYPE_STATIC(htype, ltype) PB_FI_WIDTH ## htype(ltype) |
| #define PB_FI_WIDTH_PB_ATYPE_POINTER(htype, ltype) PB_FI_WIDTH ## htype(ltype) |
| #define PB_FI_WIDTH_PB_ATYPE_CALLBACK(htype, ltype) 2 |
| #define PB_FI_WIDTH_PB_HTYPE_REQUIRED(ltype) PB_FI_WIDTH ## ltype |
| #define PB_FI_WIDTH_PB_HTYPE_SINGULAR(ltype) PB_FI_WIDTH ## ltype |
| #define PB_FI_WIDTH_PB_HTYPE_OPTIONAL(ltype) PB_FI_WIDTH ## ltype |
| #define PB_FI_WIDTH_PB_HTYPE_ONEOF(ltype) PB_FI_WIDTH ## ltype |
| #define PB_FI_WIDTH_PB_HTYPE_REPEATED(ltype) 2 |
| #define PB_FI_WIDTH_PB_HTYPE_FIXARRAY(ltype) 2 |
| #define PB_FI_WIDTH_PB_LTYPE_BOOL 1 |
| #define PB_FI_WIDTH_PB_LTYPE_BYTES 2 |
| #define PB_FI_WIDTH_PB_LTYPE_DOUBLE 1 |
| #define PB_FI_WIDTH_PB_LTYPE_ENUM 1 |
| #define PB_FI_WIDTH_PB_LTYPE_UENUM 1 |
| #define PB_FI_WIDTH_PB_LTYPE_FIXED32 1 |
| #define PB_FI_WIDTH_PB_LTYPE_FIXED64 1 |
| #define PB_FI_WIDTH_PB_LTYPE_FLOAT 1 |
| #define PB_FI_WIDTH_PB_LTYPE_INT32 1 |
| #define PB_FI_WIDTH_PB_LTYPE_INT64 1 |
| #define PB_FI_WIDTH_PB_LTYPE_MESSAGE 2 |
| #define PB_FI_WIDTH_PB_LTYPE_MSG_W_CB 2 |
| #define PB_FI_WIDTH_PB_LTYPE_SFIXED32 1 |
| #define PB_FI_WIDTH_PB_LTYPE_SFIXED64 1 |
| #define PB_FI_WIDTH_PB_LTYPE_SINT32 1 |
| #define PB_FI_WIDTH_PB_LTYPE_SINT64 1 |
| #define PB_FI_WIDTH_PB_LTYPE_STRING 2 |
| #define PB_FI_WIDTH_PB_LTYPE_UINT32 1 |
| #define PB_FI_WIDTH_PB_LTYPE_UINT64 1 |
| #define PB_FI_WIDTH_PB_LTYPE_EXTENSION 1 |
| #define PB_FI_WIDTH_PB_LTYPE_FIXED_LENGTH_BYTES 2 |
| |
| /* The mapping from protobuf types to LTYPEs is done using these macros. */ |
| #define PB_LTYPE_MAP_BOOL PB_LTYPE_BOOL |
| #define PB_LTYPE_MAP_BYTES PB_LTYPE_BYTES |
| #define PB_LTYPE_MAP_DOUBLE PB_LTYPE_FIXED64 |
| #define PB_LTYPE_MAP_ENUM PB_LTYPE_VARINT |
| #define PB_LTYPE_MAP_UENUM PB_LTYPE_UVARINT |
| #define PB_LTYPE_MAP_FIXED32 PB_LTYPE_FIXED32 |
| #define PB_LTYPE_MAP_FIXED64 PB_LTYPE_FIXED64 |
| #define PB_LTYPE_MAP_FLOAT PB_LTYPE_FIXED32 |
| #define PB_LTYPE_MAP_INT32 PB_LTYPE_VARINT |
| #define PB_LTYPE_MAP_INT64 PB_LTYPE_VARINT |
| #define PB_LTYPE_MAP_MESSAGE PB_LTYPE_SUBMESSAGE |
| #define PB_LTYPE_MAP_MSG_W_CB PB_LTYPE_SUBMSG_W_CB |
| #define PB_LTYPE_MAP_SFIXED32 PB_LTYPE_FIXED32 |
| #define PB_LTYPE_MAP_SFIXED64 PB_LTYPE_FIXED64 |
| #define PB_LTYPE_MAP_SINT32 PB_LTYPE_SVARINT |
| #define PB_LTYPE_MAP_SINT64 PB_LTYPE_SVARINT |
| #define PB_LTYPE_MAP_STRING PB_LTYPE_STRING |
| #define PB_LTYPE_MAP_UINT32 PB_LTYPE_UVARINT |
| #define PB_LTYPE_MAP_UINT64 PB_LTYPE_UVARINT |
| #define PB_LTYPE_MAP_EXTENSION PB_LTYPE_EXTENSION |
| #define PB_LTYPE_MAP_FIXED_LENGTH_BYTES PB_LTYPE_FIXED_LENGTH_BYTES |
| |
| /* These macros are used for giving out error messages. |
| * They are mostly a debugging aid; the main error information |
| * is the true/false return value from functions. |
| * Some code space can be saved by disabling the error |
| * messages if not used. |
| * |
| * PB_SET_ERROR() sets the error message if none has been set yet. |
| * msg must be a constant string literal. |
| * PB_GET_ERROR() always returns a pointer to a string. |
| * PB_RETURN_ERROR() sets the error and returns false from current |
| * function. |
| */ |
| #ifdef PB_NO_ERRMSG |
| #define PB_SET_ERROR(stream, msg) PB_UNUSED(stream) |
| #define PB_GET_ERROR(stream) "(errmsg disabled)" |
| #else |
| #define PB_SET_ERROR(stream, msg) (stream->errmsg = (stream)->errmsg ? (stream)->errmsg : (msg)) |
| #define PB_GET_ERROR(stream) ((stream)->errmsg ? (stream)->errmsg : "(none)") |
| #endif |
| |
| #define PB_RETURN_ERROR(stream, msg) return PB_SET_ERROR(stream, msg), false |
| |
| #ifdef __cplusplus |
| } /* extern "C" */ |
| #endif |
| |
| #ifdef __cplusplus |
| #if __cplusplus >= 201103L |
| #define PB_CONSTEXPR constexpr |
| #else // __cplusplus >= 201103L |
| #define PB_CONSTEXPR |
| #endif // __cplusplus >= 201103L |
| |
| #if __cplusplus >= 201703L |
| #define PB_INLINE_CONSTEXPR inline constexpr |
| #else // __cplusplus >= 201703L |
| #define PB_INLINE_CONSTEXPR PB_CONSTEXPR |
| #endif // __cplusplus >= 201703L |
| |
| namespace nanopb { |
| // Each type will be partially specialized by the generator. |
| template <typename GenMessageT> struct MessageDescriptor; |
| } // namespace nanopb |
| #endif /* __cplusplus */ |
| |
| #endif |