zzz_generated/pump-controller-app/zap-generated/gen_config.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  *
  *    Copyright (c) 2022 Project CHIP Authors
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 // THIS FILE IS GENERATED BY ZAP

 // Prevent multiple inclusion
 #pragma once

 // User options for plugin Binding Table Library
 #define EMBER_BINDING_TABLE_SIZE 10

 /**** Network Section ****/
 #define EMBER_SUPPORTED_NETWORKS (1)

 #define EMBER_APS_UNICAST_MESSAGE_COUNT 10

 /**** Cluster endpoint counts ****/
 #define EMBER_AF_IDENTIFY_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_ON_OFF_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
 #define EMBER_AF_DESCRIPTOR_CLUSTER_SERVER_ENDPOINT_COUNT (2)
 #define EMBER_AF_BINDING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_ACCESS_CONTROL_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_BASIC_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
 #define EMBER_AF_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_GENERAL_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_NETWORK_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_GENERAL_DIAGNOSTICS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_ADMINISTRATOR_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_OPERATIONAL_CREDENTIALS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_GROUP_KEY_MANAGEMENT_CLUSTER_SERVER_ENDPOINT_COUNT (1)
 #define EMBER_AF_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
 #define EMBER_AF_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
 #define EMBER_AF_PRESSURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
 #define EMBER_AF_FLOW_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)

 /**** Cluster Plugins ****/

 // Use this macro to check if the server side of the Identify cluster is included
 #define ZCL_USING_IDENTIFY_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_IDENTIFY_SERVER
 #define EMBER_AF_PLUGIN_IDENTIFY

 // Use this macro to check if the client side of the On/Off cluster is included
 #define ZCL_USING_ON_OFF_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_ON_OFF_CLIENT

 // Use this macro to check if the server side of the Descriptor cluster is included
 #define ZCL_USING_DESCRIPTOR_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_DESCRIPTOR_SERVER
 #define EMBER_AF_PLUGIN_DESCRIPTOR

 // Use this macro to check if the server side of the Binding cluster is included
 #define ZCL_USING_BINDING_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_BINDING_SERVER
 #define EMBER_AF_PLUGIN_BINDING

 // Use this macro to check if the server side of the Access Control cluster is included
 #define ZCL_USING_ACCESS_CONTROL_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_ACCESS_CONTROL_SERVER
 #define EMBER_AF_PLUGIN_ACCESS_CONTROL

 // Use this macro to check if the server side of the Basic cluster is included
 #define ZCL_USING_BASIC_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_BASIC_SERVER
 #define EMBER_AF_PLUGIN_BASIC

 // Use this macro to check if the client side of the OTA Software Update Provider cluster is included
 #define ZCL_USING_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_PROVIDER_CLIENT

 // Use this macro to check if the server side of the OTA Software Update Requestor cluster is included
 #define ZCL_USING_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_REQUESTOR_SERVER
 #define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_REQUESTOR

 // Use this macro to check if the server side of the General Commissioning cluster is included
 #define ZCL_USING_GENERAL_COMMISSIONING_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_GENERAL_COMMISSIONING_SERVER
 #define EMBER_AF_PLUGIN_GENERAL_COMMISSIONING

 // Use this macro to check if the server side of the Network Commissioning cluster is included
 #define ZCL_USING_NETWORK_COMMISSIONING_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_NETWORK_COMMISSIONING_SERVER
 #define EMBER_AF_PLUGIN_NETWORK_COMMISSIONING

 // Use this macro to check if the server side of the General Diagnostics cluster is included
 #define ZCL_USING_GENERAL_DIAGNOSTICS_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_GENERAL_DIAGNOSTICS_SERVER
 #define EMBER_AF_PLUGIN_GENERAL_DIAGNOSTICS

 // Use this macro to check if the server side of the Thread Network Diagnostics cluster is included
 #define ZCL_USING_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_THREAD_NETWORK_DIAGNOSTICS_SERVER
 #define EMBER_AF_PLUGIN_THREAD_NETWORK_DIAGNOSTICS

 // Use this macro to check if the server side of the AdministratorCommissioning cluster is included
 #define ZCL_USING_ADMINISTRATOR_COMMISSIONING_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_ADMINISTRATOR_COMMISSIONING_SERVER
 #define EMBER_AF_PLUGIN_ADMINISTRATOR_COMMISSIONING

 // Use this macro to check if the server side of the Operational Credentials cluster is included
 #define ZCL_USING_OPERATIONAL_CREDENTIALS_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_OPERATIONAL_CREDENTIALS_SERVER
 #define EMBER_AF_PLUGIN_OPERATIONAL_CREDENTIALS

 // Use this macro to check if the server side of the Group Key Management cluster is included
 #define ZCL_USING_GROUP_KEY_MANAGEMENT_CLUSTER_SERVER
 #define EMBER_AF_PLUGIN_GROUP_KEY_MANAGEMENT_SERVER
 #define EMBER_AF_PLUGIN_GROUP_KEY_MANAGEMENT

 // Use this macro to check if the client side of the Pump Configuration and Control cluster is included
 #define ZCL_USING_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_PUMP_CONFIGURATION_AND_CONTROL_CLIENT

 // Use this macro to check if the client side of the Temperature Measurement cluster is included
 #define ZCL_USING_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_TEMPERATURE_MEASUREMENT_CLIENT

 // Use this macro to check if the client side of the Pressure Measurement cluster is included
 #define ZCL_USING_PRESSURE_MEASUREMENT_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_PRESSURE_MEASUREMENT_CLIENT

 // Use this macro to check if the client side of the Flow Measurement cluster is included
 #define ZCL_USING_FLOW_MEASUREMENT_CLUSTER_CLIENT
 #define EMBER_AF_PLUGIN_FLOW_MEASUREMENT_CLIENT
	/*
	*
	* Copyright (c) 2022 Project CHIP Authors
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	// THIS FILE IS GENERATED BY ZAP

	// Prevent multiple inclusion
	#pragma once

	// User options for plugin Binding Table Library
	#define EMBER_BINDING_TABLE_SIZE 10

	/** Network Section **/
	#define EMBER_SUPPORTED_NETWORKS (1)

	#define EMBER_APS_UNICAST_MESSAGE_COUNT 10

	/** Cluster endpoint counts **/
	#define EMBER_AF_IDENTIFY_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_ON_OFF_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
	#define EMBER_AF_DESCRIPTOR_CLUSTER_SERVER_ENDPOINT_COUNT (2)
	#define EMBER_AF_BINDING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_ACCESS_CONTROL_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_BASIC_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
	#define EMBER_AF_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_GENERAL_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_NETWORK_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_GENERAL_DIAGNOSTICS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_ADMINISTRATOR_COMMISSIONING_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_OPERATIONAL_CREDENTIALS_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_GROUP_KEY_MANAGEMENT_CLUSTER_SERVER_ENDPOINT_COUNT (1)
	#define EMBER_AF_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
	#define EMBER_AF_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
	#define EMBER_AF_PRESSURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)
	#define EMBER_AF_FLOW_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1)

	/** Cluster Plugins **/

	// Use this macro to check if the server side of the Identify cluster is included
	#define ZCL_USING_IDENTIFY_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_IDENTIFY_SERVER
	#define EMBER_AF_PLUGIN_IDENTIFY

	// Use this macro to check if the client side of the On/Off cluster is included
	#define ZCL_USING_ON_OFF_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_ON_OFF_CLIENT

	// Use this macro to check if the server side of the Descriptor cluster is included
	#define ZCL_USING_DESCRIPTOR_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_DESCRIPTOR_SERVER
	#define EMBER_AF_PLUGIN_DESCRIPTOR

	// Use this macro to check if the server side of the Binding cluster is included
	#define ZCL_USING_BINDING_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_BINDING_SERVER
	#define EMBER_AF_PLUGIN_BINDING

	// Use this macro to check if the server side of the Access Control cluster is included
	#define ZCL_USING_ACCESS_CONTROL_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_ACCESS_CONTROL_SERVER
	#define EMBER_AF_PLUGIN_ACCESS_CONTROL

	// Use this macro to check if the server side of the Basic cluster is included
	#define ZCL_USING_BASIC_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_BASIC_SERVER
	#define EMBER_AF_PLUGIN_BASIC

	// Use this macro to check if the client side of the OTA Software Update Provider cluster is included
	#define ZCL_USING_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_PROVIDER_CLIENT

	// Use this macro to check if the server side of the OTA Software Update Requestor cluster is included
	#define ZCL_USING_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_REQUESTOR_SERVER
	#define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_REQUESTOR

	// Use this macro to check if the server side of the General Commissioning cluster is included
	#define ZCL_USING_GENERAL_COMMISSIONING_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_GENERAL_COMMISSIONING_SERVER
	#define EMBER_AF_PLUGIN_GENERAL_COMMISSIONING

	// Use this macro to check if the server side of the Network Commissioning cluster is included
	#define ZCL_USING_NETWORK_COMMISSIONING_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_NETWORK_COMMISSIONING_SERVER
	#define EMBER_AF_PLUGIN_NETWORK_COMMISSIONING

	// Use this macro to check if the server side of the General Diagnostics cluster is included
	#define ZCL_USING_GENERAL_DIAGNOSTICS_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_GENERAL_DIAGNOSTICS_SERVER
	#define EMBER_AF_PLUGIN_GENERAL_DIAGNOSTICS

	// Use this macro to check if the server side of the Thread Network Diagnostics cluster is included
	#define ZCL_USING_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_THREAD_NETWORK_DIAGNOSTICS_SERVER
	#define EMBER_AF_PLUGIN_THREAD_NETWORK_DIAGNOSTICS

	// Use this macro to check if the server side of the AdministratorCommissioning cluster is included
	#define ZCL_USING_ADMINISTRATOR_COMMISSIONING_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_ADMINISTRATOR_COMMISSIONING_SERVER
	#define EMBER_AF_PLUGIN_ADMINISTRATOR_COMMISSIONING

	// Use this macro to check if the server side of the Operational Credentials cluster is included
	#define ZCL_USING_OPERATIONAL_CREDENTIALS_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_OPERATIONAL_CREDENTIALS_SERVER
	#define EMBER_AF_PLUGIN_OPERATIONAL_CREDENTIALS

	// Use this macro to check if the server side of the Group Key Management cluster is included
	#define ZCL_USING_GROUP_KEY_MANAGEMENT_CLUSTER_SERVER
	#define EMBER_AF_PLUGIN_GROUP_KEY_MANAGEMENT_SERVER
	#define EMBER_AF_PLUGIN_GROUP_KEY_MANAGEMENT

	// Use this macro to check if the client side of the Pump Configuration and Control cluster is included
	#define ZCL_USING_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_PUMP_CONFIGURATION_AND_CONTROL_CLIENT

	// Use this macro to check if the client side of the Temperature Measurement cluster is included
	#define ZCL_USING_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_TEMPERATURE_MEASUREMENT_CLIENT

	// Use this macro to check if the client side of the Pressure Measurement cluster is included
	#define ZCL_USING_PRESSURE_MEASUREMENT_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_PRESSURE_MEASUREMENT_CLIENT

	// Use this macro to check if the client side of the Flow Measurement cluster is included
	#define ZCL_USING_FLOW_MEASUREMENT_CLUSTER_CLIENT
	#define EMBER_AF_PLUGIN_FLOW_MEASUREMENT_CLIENT