| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 3.1.1. [TC-IDM-1.1] Invoke Request Action from DUT to TH - [{DUT_Client}] |
| |
| PICS: |
| - MCORE.IDM.C.InvokeRequest |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as client test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: |
| "DUT sends the Invoke Request Message to the TH. The Message should |
| contain one valid CommandDataIB, which has the specific Endpoint, |
| Specific Cluster and Specific Command." |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool onoff on 1 1 |
| |
| On TH all-clusters-app, Verify we are getting EndpointID, CommandID, ClusterID in the response data (as below) matching with the data sent in the above command |
| |
| [1655717373.046081][10909:10909] CHIP:DMG: InvokeRequestMessage = |
| [1655717373.046137][10909:10909] CHIP:DMG: { |
| [1655717373.046185][10909:10909] CHIP:DMG: suppressResponse = false, |
| [1655717373.046240][10909:10909] CHIP:DMG: timedRequest = false, |
| [1655717373.046291][10909:10909] CHIP:DMG: InvokeRequests = |
| [1655717373.046356][10909:10909] CHIP:DMG: [ |
| [1655717373.046407][10909:10909] CHIP:DMG: CommandDataIB = |
| [1655717373.046464][10909:10909] CHIP:DMG: { |
| [1655717373.046518][10909:10909] CHIP:DMG: CommandPathIB = |
| [1655717373.046583][10909:10909] CHIP:DMG: { |
| [1655717373.046649][10909:10909] CHIP:DMG: EndpointId = 0x1, |
| [1655717373.046720][10909:10909] CHIP:DMG: ClusterId = 0x6, |
| [1655717373.046782][10909:10909] CHIP:DMG: CommandId = 0x1, |
| [1655717373.046885][10909:10909] CHIP:DMG: }, |
| [1655717373.046961][10909:10909] CHIP:DMG: |
| [1655717373.047017][10909:10909] CHIP:DMG: CommandFields = |
| [1655717373.047080][10909:10909] CHIP:DMG: { |
| [1655717373.047143][10909:10909] CHIP:DMG: }, |
| [1655717373.047211][10909:10909] CHIP:DMG: }, |
| [1655717373.047272][10909:10909] CHIP:DMG: |
| [1655717373.047322][10909:10909] CHIP:DMG: ], |
| [1655717373.047383][10909:10909] CHIP:DMG: |
| [1655717373.047433][10909:10909] CHIP:DMG: InteractionModelRevision = 1 |
| [1655717373.047482][10909:10909] CHIP:DMG: }, |
| [1655717373.047599][10909:10909] CHIP:DMG: AccessControl: checking f=1 a=c s=0x000000000001B669 t= c=0x0000_0006 e=1 p=o |
| [1655717373.047665][10909:10909] CHIP:DMG: AccessControl: allowed |
| |
| On DUT as a client side, verify that TH all-clusters-app sent success response |
| |
| [1657867897.521090][2728:2733] CHIP:DMG: }, |
| [1657867897.521162][2728:2733] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0006 Command=0x0000_0001 Status=0x0 |
| [1657867897.521212][2728:2733] CHIP:DMG: ICR moving to [AwaitingDe] |
| [1657867897.521275][2728:2733] CHIP:EM: Sending Standalone Ack for MessageCounter:30068876 on exchange 7104i |
| disabled: true |
| |
| - label: |
| "DUT sends the Invoke Request Message to the TH. The Message should |
| contain the wildcard for Endpoint, specific Cluster and Specific |
| Command in the CommandDataIB." |
| verification: | |
| Out of Scope for V1.0 |
| disabled: true |
| |
| - label: |
| "DUT sends the Invoke Request Message to the TH. The Message should |
| contain multiple paths Path = [[ Endpoint = Endpoint1, Cluster = |
| ClusterID, Command = Command1 ], [ Endpoint = Endpoint1, Cluster = |
| ClusterID, Command = Command2 ] ]" |
| verification: | |
| Out of Scope for V1.0 |
| disabled: true |
| |
| - label: |
| "DUT sends the Invoke Request Message to the TH. The Message should |
| contain one valid CommandDataIB, which has the specific Endpoint, |
| Specific Cluster and Specific Command. Send 2 more Invoke Request |
| Messages to the TH." |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| ./chip-tool onoff off 1 1 |
| |
| On TH all-clusters-app, verify that we are getting EndpointID, CommandID, ClusterID in the response data (as below) matching with the data sent in the above command |
| [1655717456.105815][10909:10909] CHIP:DMG: InvokeRequestMessage = |
| [1655717456.105853][10909:10909] CHIP:DMG: { |
| [1655717456.105887][10909:10909] CHIP:DMG: suppressResponse = false, |
| [1655717456.105933][10909:10909] CHIP:DMG: timedRequest = false, |
| [1655717456.105970][10909:10909] CHIP:DMG: InvokeRequests = |
| [1655717456.106015][10909:10909] CHIP:DMG: [ |
| [1655717456.106051][10909:10909] CHIP:DMG: CommandDataIB = |
| [1655717456.106091][10909:10909] CHIP:DMG: { |
| [1655717456.106129][10909:10909] CHIP:DMG: CommandPathIB = |
| [1655717456.106173][10909:10909] CHIP:DMG: { |
| [1655717456.106220][10909:10909] CHIP:DMG: EndpointId = 0x1, |
| [1655717456.106274][10909:10909] CHIP:DMG: ClusterId = 0x6, |
| [1655717456.106327][10909:10909] CHIP:DMG: CommandId = 0x0, |
| [1655717456.106373][10909:10909] CHIP:DMG: }, |
| [1655717456.106420][10909:10909] CHIP:DMG: |
| [1655717456.106462][10909:10909] CHIP:DMG: CommandFields = |
| [1655717456.106507][10909:10909] CHIP:DMG: { |
| [1655717456.106551][10909:10909] CHIP:DMG: }, |
| [1655717456.106594][10909:10909] CHIP:DMG: }, |
| [1655717456.106636][10909:10909] CHIP:DMG: |
| [1655717456.106671][10909:10909] CHIP:DMG: ], |
| [1655717456.106714][10909:10909] CHIP:DMG: |
| [1655717456.106749][10909:10909] CHIP:DMG: InteractionModelRevision = 1 |
| [1655717456.106783][10909:10909] CHIP:DMG: }, |
| [1655717456.106904][10909:10909] CHIP:DMG: AccessControl: checking f=1 a=c s=0x000000000001B669 t= c=0x0000_0006 e=1 p=o |
| [1655717456.106954][10909:10909] CHIP:DMG: AccessControl: allowed |
| |
| |
| On DUT as a client side, verify that TH all-clusters-app sent success response |
| [1657868210.442226][2746:2751] CHIP:DMG: |
| [1657868210.442265][2746:2751] CHIP:DMG: InteractionModelRevision = 1 |
| [1657868210.442306][2746:2751] CHIP:DMG: }, |
| [1657868210.442398][2746:2751] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0006 Command=0x0000_0000 Status=0x0 |
| [1657868210.442463][2746:2751] CHIP:DMG: ICR moving to [AwaitingDe] |
| [1657868210.442539][2746:2751] CHIP:EM: Sending Standalone Ack for MessageCounter:19470563 on exchange 18884i |
| |
| |
| |
| ./chip-tool onoff off 1 1 |
| Verify we are getting EndpointID, CommandID, ClusterID in the response data (as below) matching with the data sent in the above command |
| |
| ./chip-tool onoff off 1 1 |
| Verify we are getting EndpointID, CommandID, ClusterID in the response data (as below) matching with the data sent in the above command |
| disabled: true |
