| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 71.3.1. [TC-ILL-3.1] Attributes with Client as DUT |
| |
| PICS: |
| - ILL.C |
| - ILL.C.AM-READ |
| - ILL.C.AO-READ |
| - ILL.C.AM-WRITE |
| - ILL.C.AO-WRITE |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as client test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: |
| "DUT reads all supported mandatory attributes from TH one at a time in |
| a manufacturer specific order" |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| sudo ./chip-tool illuminancemeasurement read min-measured-value 1 1 |
| Verify DUT receives min-measured-value attribute response on the TH(all-clusters-app) Log: |
| |
| [1658142106.966504][13946:13946] CHIP:IM: Received Read request |
| [1658142106.966671][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142106.966738][13946:13946] CHIP:DMG: { |
| [1658142106.966821][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142106.966887][13946:13946] CHIP:DMG: [ |
| [1658142106.966947][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142106.967035][13946:13946] CHIP:DMG: { |
| [1658142106.967105][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142106.967209][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142106.967254][13946:13946] CHIP:DMG: Attribute = 0x0000_0001, |
| [1658142106.967281][13946:13946] CHIP:DMG: } |
| [1658142106.967320][13946:13946] CHIP:DMG: |
| [1658142106.967346][13946:13946] CHIP:DMG: ], |
| [1658142106.967384][13946:13946] CHIP:DMG: |
| [1658142106.967413][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142106.967447][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142106.967471][13946:13946] CHIP:DMG: }, |
| [1658142106.967568][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142106.967676][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| |
| sudo ./chip-tool illuminancemeasurement read max-measured-value 1 1 |
| Verify DUT receives max-measured-value attribute response on the TH(all-clusters-app) Log: |
| [1658142397.298817][13946:13946] CHIP:IM: Received Read request |
| [1658142397.298895][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142397.298932][13946:13946] CHIP:DMG: { |
| [1658142397.298960][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142397.298986][13946:13946] CHIP:DMG: [ |
| [1658142397.299020][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142397.299047][13946:13946] CHIP:DMG: { |
| [1658142397.299085][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142397.299125][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142397.299158][13946:13946] CHIP:DMG: Attribute = 0x0000_0002, |
| [1658142397.299195][13946:13946] CHIP:DMG: } |
| [1658142397.299223][13946:13946] CHIP:DMG: |
| [1658142397.299258][13946:13946] CHIP:DMG: ], |
| [1658142397.299286][13946:13946] CHIP:DMG: |
| [1658142397.299321][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142397.299346][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142397.299378][13946:13946] CHIP:DMG: }, |
| [1658142397.299462][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142397.299556][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| |
| |
| sudo ./chip-tool illuminancemeasurement read measured-value 1 1 |
| Verify DUT receives measured-value attribute response on the TH(all-clusters-app) Log: |
| verify On TH(Reference app) receives the right Read Request Message for the data sent in the above command |
| [1658142471.266188][13946:13946] CHIP:IM: Received Read request |
| [1658142471.266273][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142471.266303][13946:13946] CHIP:DMG: { |
| [1658142471.266329][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142471.266358][13946:13946] CHIP:DMG: [ |
| [1658142471.266386][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142471.266417][13946:13946] CHIP:DMG: { |
| [1658142471.266449][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142471.266486][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142471.266521][13946:13946] CHIP:DMG: Attribute = 0x0000_0000, |
| [1658142471.266558][13946:13946] CHIP:DMG: } |
| [1658142471.266593][13946:13946] CHIP:DMG: |
| [1658142471.266624][13946:13946] CHIP:DMG: ], |
| [1658142471.266656][13946:13946] CHIP:DMG: |
| [1658142471.266686][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142471.266714][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142471.266740][13946:13946] CHIP:DMG: }, |
| [1658142471.266826][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142471.266939][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| disabled: true |
| |
| - label: |
| "DUT reads all supported optional attributes from TH one at a time in |
| a manufacturer specific order" |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool illuminancemeasurement read tolerance 1 1 |
| Verify DUT receives tolerance attribute response on the TH(all-clusters-app) Log: |
| [1658142553.001113][13946:13946] CHIP:IM: Received Read request |
| [1658142553.001197][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142553.001258][13946:13946] CHIP:DMG: { |
| [1658142553.001284][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142553.001314][13946:13946] CHIP:DMG: [ |
| [1658142553.001342][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142553.001373][13946:13946] CHIP:DMG: { |
| [1658142553.001424][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142553.001465][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142553.001501][13946:13946] CHIP:DMG: Attribute = 0x0000_0003, |
| [1658142553.001536][13946:13946] CHIP:DMG: } |
| [1658142553.001568][13946:13946] CHIP:DMG: |
| [1658142553.001598][13946:13946] CHIP:DMG: ], |
| [1658142553.001630][13946:13946] CHIP:DMG: |
| [1658142553.001660][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142553.001690][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142553.001717][13946:13946] CHIP:DMG: }, |
| [1658142553.001801][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| |
| |
| ./chip-tool illuminancemeasurement read light-sensor-type 1 1 |
| Verify DUT receives light-sensor-type attribute response on the TH(all-clusters-app) Log: |
| [1658142581.619138][13946:13946] CHIP:IM: Received Read request |
| [1658142581.619214][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142581.619265][13946:13946] CHIP:DMG: { |
| [1658142581.619288][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142581.619314][13946:13946] CHIP:DMG: [ |
| [1658142581.619338][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142581.619365][13946:13946] CHIP:DMG: { |
| [1658142581.619393][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142581.619425][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142581.619456][13946:13946] CHIP:DMG: Attribute = 0x0000_0004, |
| [1658142581.619485][13946:13946] CHIP:DMG: } |
| [1658142581.619512][13946:13946] CHIP:DMG: |
| [1658142581.619537][13946:13946] CHIP:DMG: ], |
| [1658142581.619565][13946:13946] CHIP:DMG: |
| [1658142581.619591][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142581.619616][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142581.619639][13946:13946] CHIP:DMG: }, |
| [1658142581.619714][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| disabled: true |
| |
| - label: |
| "DUT writes a suitable value to all supported mandatory attributes on |
| the TH one at a time in a manufacturer specific order" |
| verification: | |
| No writable attrbute for this cluster |
| disabled: true |
| |
| - label: |
| "DUT writes a suitable value to all supported optional attributes on |
| the TH one at a time in a manufacturer specific order" |
| verification: | |
| No writable attrbute for this cluster |
| disabled: true |
| |
| - label: |
| "Configure TH such that it implements mandatory and none of the |
| optional attributes of the server-side of the cluster, and that it |
| also reflects this in global attributes such as FeatureMap and |
| AttributeList. Commission DUT to TH again" |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| sudo ./chip-tool illuminancemeasurement read min-measured-value 1 1 |
| Verify DUT receives min-measured-value attribute response on the TH(all-clusters-minimal-app) Log: |
| |
| [1658142106.966504][13946:13946] CHIP:IM: Received Read request |
| [1658142106.966671][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142106.966738][13946:13946] CHIP:DMG: { |
| [1658142106.966821][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142106.966887][13946:13946] CHIP:DMG: [ |
| [1658142106.966947][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142106.967035][13946:13946] CHIP:DMG: { |
| [1658142106.967105][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142106.967209][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142106.967254][13946:13946] CHIP:DMG: Attribute = 0x0000_0001, |
| [1658142106.967281][13946:13946] CHIP:DMG: } |
| [1658142106.967320][13946:13946] CHIP:DMG: |
| [1658142106.967346][13946:13946] CHIP:DMG: ], |
| [1658142106.967384][13946:13946] CHIP:DMG: |
| [1658142106.967413][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142106.967447][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142106.967471][13946:13946] CHIP:DMG: }, |
| [1658142106.967568][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142106.967676][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| |
| |
| |
| sudo ./chip-tool illuminancemeasurement read max-measured-value 1 1 |
| Verify DUT receives max-measured-value attribute response on the TH(all-clusters-minimal-app) Log: |
| [1658142397.298817][13946:13946] CHIP:IM: Received Read request |
| [1658142397.298895][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142397.298932][13946:13946] CHIP:DMG: { |
| [1658142397.298960][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142397.298986][13946:13946] CHIP:DMG: [ |
| [1658142397.299020][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142397.299047][13946:13946] CHIP:DMG: { |
| [1658142397.299085][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142397.299125][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142397.299158][13946:13946] CHIP:DMG: Attribute = 0x0000_0002, |
| [1658142397.299195][13946:13946] CHIP:DMG: } |
| [1658142397.299223][13946:13946] CHIP:DMG: |
| [1658142397.299258][13946:13946] CHIP:DMG: ], |
| [1658142397.299286][13946:13946] CHIP:DMG: |
| [1658142397.299321][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142397.299346][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142397.299378][13946:13946] CHIP:DMG: }, |
| [1658142397.299462][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142397.299556][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| |
| |
| sudo ./chip-tool illuminancemeasurement read measured-value 1 1 |
| Verify DUT receives measured-value attribute response on the TH(all-clusters-minimal-app) Log: |
| [1658142471.266188][13946:13946] CHIP:IM: Received Read request |
| [1658142471.266273][13946:13946] CHIP:DMG: ReadRequestMessage = |
| [1658142471.266303][13946:13946] CHIP:DMG: { |
| [1658142471.266329][13946:13946] CHIP:DMG: AttributePathIBs = |
| [1658142471.266358][13946:13946] CHIP:DMG: [ |
| [1658142471.266386][13946:13946] CHIP:DMG: AttributePathIB = |
| [1658142471.266417][13946:13946] CHIP:DMG: { |
| [1658142471.266449][13946:13946] CHIP:DMG: Endpoint = 0x1, |
| [1658142471.266486][13946:13946] CHIP:DMG: Cluster = 0x400, |
| [1658142471.266521][13946:13946] CHIP:DMG: Attribute = 0x0000_0000, |
| [1658142471.266558][13946:13946] CHIP:DMG: } |
| [1658142471.266593][13946:13946] CHIP:DMG: |
| [1658142471.266624][13946:13946] CHIP:DMG: ], |
| [1658142471.266656][13946:13946] CHIP:DMG: |
| [1658142471.266686][13946:13946] CHIP:DMG: isFabricFiltered = true, |
| [1658142471.266714][13946:13946] CHIP:DMG: InteractionModelRevision = 1 |
| [1658142471.266740][13946:13946] CHIP:DMG: }, |
| [1658142471.266826][13946:13946] CHIP:DMG: IM RH moving to [GeneratingReports] |
| [1658142471.266939][13946:13946] CHIP:DMG: Building Reports for ReadHandler with LastReportGeneration = 0 DirtyGeneration = 0 |
| disabled: true |
| |
| - label: |
| "DUT reads all supported optional attributes from TH one at a time in |
| a manufacturer specific order" |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool illuminancemeasurement read tolerance 1 1 |
| |
| on TH all-clusters-minimal-app verify status response a UNSUPPORTED_ATTRIBUTE |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| |
| ./chip-tool illuminancemeasurement read light-sensor-type 1 1 |
| on TH all-clusters-minimal-app verify status response a UNSUPPORTED_ATTRIBUTE |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: |
| "DUT writes a suitable value to all supported optional attributes on |
| the TH one at a time in a manufacturer specific order" |
| verification: | |
| No writable attrbute for this cluster |
| disabled: true |
