| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 24.1.9. [TC-CADMIN-1.9] Device exit commissioning mode after 20 failed |
| commission attempts [ECM] [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| timeout: 700 |
| nodeIdForDuplicateCommissioning: |
| type: node_id |
| defaultValue: 0x11 |
| nodeId2: |
| type: node_id |
| defaultValue: 0xCAFE |
| nodeId3: |
| type: node_id |
| defaultValue: 0xC00FEE |
| endpoint: 0 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| correctPayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00I31506010" |
| incorrectSetupCodePayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00I.0648G00" |
| |
| tests: |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Open commissioning window exactly like we plan to later to verify |
| that `correctPayload` can in fact commision the device." |
| cluster: "AdministratorCommissioning" |
| command: "OpenCommissioningWindow" |
| timedInteractionTimeoutMs: 10000 |
| PICS: CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 900 |
| - name: "PAKEVerifier" |
| value: "\x06\xc7\x56\xdf\xfc\xd7\x22\x65\x34\x52\xa1\x2d\xcd\x94\x5d\x8c\x54\xda\x2b\x0f\x3c\xbd\x1b\x4d\xc3\xf1\xad\xb2\x23\xae\xb2\x6b\x04\x7c\xd2\x4c\x96\x86\x6f\x97\x9b\x1d\x83\xec\x50\xe2\xb4\xae\x30\xcd\xf2\xfd\xb3\x2b\xd8\xa2\x11\xb8\x37\xdc\x94\xed\xcd\x56\xf4\xd1\x43\x77\x19\x10\x76\xbf\xc5\x9d\x99\xb7\xdd\x30\x53\xef\xd6\xf0\x2c\x44\x34\xf2\xbd\xd2\x7a\xa4\xf9\xce\xa7\x0d\x73\x8e\x4c" |
| - name: "discriminator" |
| value: discriminator |
| - name: "iterations" |
| value: 1000 |
| - name: "salt" |
| value: "SPAKE2P Key Salt" |
| |
| - label: |
| "Temporarily commission device with `correctPayload` just like we will |
| try to later" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| # Only run this if we ran the previous step. |
| PICS: CADMIN.S && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: correctPayload |
| |
| - label: "Wait for a CASE session" |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| |
| - label: "Read FabricIndex of beta so we can delete the temp fabric" |
| identity: "beta" |
| cluster: "Operational Credentials" |
| command: "readAttribute" |
| attribute: "CurrentFabricIndex" |
| # Only run this if we commissioned the device. |
| PICS: CADMIN.S.C00.Rsp |
| response: |
| saveAs: tempFabricIndex |
| |
| - label: "Remove the temp fabric" |
| cluster: "Operational Credentials" |
| command: "RemoveFabric" |
| # Only run this if we commissioned the device. |
| PICS: CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "FabricIndex" |
| value: tempFabricIndex |
| |
| - label: "TH_CR1 opens a new commissioning window on DUT_CE" |
| cluster: "AdministratorCommissioning" |
| command: "OpenCommissioningWindow" |
| timedInteractionTimeoutMs: 10000 |
| PICS: CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 900 |
| - name: "PAKEVerifier" |
| value: "\x06\xc7\x56\xdf\xfc\xd7\x22\x65\x34\x52\xa1\x2d\xcd\x94\x5d\x8c\x54\xda\x2b\x0f\x3c\xbd\x1b\x4d\xc3\xf1\xad\xb2\x23\xae\xb2\x6b\x04\x7c\xd2\x4c\x96\x86\x6f\x97\x9b\x1d\x83\xec\x50\xe2\xb4\xae\x30\xcd\xf2\xfd\xb3\x2b\xd8\xa2\x11\xb8\x37\xdc\x94\xed\xcd\x56\xf4\xd1\x43\x77\x19\x10\x76\xbf\xc5\x9d\x99\xb7\xdd\x30\x53\xef\xd6\xf0\x2c\x44\x34\xf2\xbd\xd2\x7a\xa4\xf9\xce\xa7\x0d\x73\x8e\x4c" |
| - name: "discriminator" |
| value: discriminator |
| - name: "iterations" |
| value: 1000 |
| - name: "salt" |
| value: "SPAKE2P Key Salt" |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| # This step must match the verification step above where we checked `payload` |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using valid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: correctPayload |
| response: |
| error: FAILURE |
| |
| - label: "TH_CR3 starts a commissioning process with DUT_CE" |
| identity: "gamma" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId3 |
| - name: "payload" |
| value: correctPayload |
| response: |
| error: FAILURE |