| # |
| # Copyright (c) 2022-2024 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # @file |
| # CMake sub-project defining 'chip' target which represents CHIP library |
| # Since CHIP doesn't provide native CMake support, ExternalProject |
| # module is used to build the required artifacts with GN meta-build |
| # system. It is assumed that find_package(Zephyr) has been called before |
| # including this file. |
| # |
| |
| if (CONFIG_CHIP) |
| |
| include(ExternalProject) |
| include(../../zephyr/ota-image.cmake) |
| include(../../zephyr/zephyr-util.cmake) |
| include(generate_factory_data.cmake) |
| |
| # ============================================================================== |
| # Prepare CHIP configuration based on the project Kconfig configuration |
| # ============================================================================== |
| |
| if (NOT CHIP_ROOT) |
| get_filename_component(CHIP_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../../.. REALPATH) |
| endif() |
| get_filename_component(GN_ROOT_TARGET ${CHIP_ROOT}/config/telink/chip-gn REALPATH) |
| get_filename_component(COMMON_CMAKE_SOURCE_DIR ${CHIP_ROOT}/config/common/cmake REALPATH) |
| |
| # Get common Cmake sources |
| |
| include(${COMMON_CMAKE_SOURCE_DIR}/chip_gn_args.cmake) |
| include(${COMMON_CMAKE_SOURCE_DIR}/chip_gn.cmake) |
| |
| # Prepare compiler flags |
| matter_add_flags(-isystem${ZEPHYR_BASE}/../modules/crypto/mbedtls/include/) |
| |
| if (CONFIG_POSIX_API) |
| matter_add_flags(-D_DEFAULT_SOURCE) |
| matter_add_flags(-isystem${ZEPHYR_BASE}/include/zephyr/posix) |
| endif() |
| |
| matter_add_flags(-DNL_ASSERT_USE_FLAGS_DEFAULT=1) |
| |
| zephyr_include_directories(${CHIP_ROOT}/src/platform/telink/) |
| |
| zephyr_get_compile_flags(ZEPHYR_CFLAGS_C C) |
| matter_add_cflags("${ZEPHYR_CFLAGS_C}") |
| zephyr_get_compile_flags(ZEPHYR_CFLAGS_CC CXX) |
| matter_add_cxxflags("${ZEPHYR_CFLAGS_CC}") |
| zephyr_get_gnu_cpp_standard(ZEPHYR_GNU_CPP_STD) |
| matter_add_cxxflags(${ZEPHYR_GNU_CPP_STD}) |
| |
| matter_add_flags(-DMBEDTLS_USER_CONFIG_FILE=<telink-mbedtls-config.h>) |
| |
| # Set up custom OpenThread configuration |
| |
| if (CONFIG_CHIP_OPENTHREAD_CONFIG) |
| get_filename_component(CHIP_OPENTHREAD_CONFIG |
| ${CONFIG_CHIP_OPENTHREAD_CONFIG} |
| REALPATH |
| BASE_DIR ${CMAKE_SOURCE_DIR} |
| ) |
| zephyr_set_openthread_config(${CHIP_OPENTHREAD_CONFIG}) |
| endif() |
| |
| # ============================================================================== |
| # Generate configuration for CHIP GN build system |
| # ============================================================================== |
| |
| matter_common_gn_args( |
| DEBUG CONFIG_DEBUG |
| LIB_SHELL CONFIG_CHIP_LIB_SHELL |
| LIB_TESTS CONFIG_CHIP_BUILD_TESTS |
| PROJECT_CONFIG ${CONFIG_CHIP_PROJECT_CONFIG} |
| DEVICE_INFO_EXAMPLE_PROVIDER CONFIG_CHIP_EXAMPLE_DEVICE_INFO_PROVIDER |
| ) |
| matter_add_gn_arg_string("zephyr_ar" ${CMAKE_AR}) |
| matter_add_gn_arg_string("zephyr_cc" ${CMAKE_C_COMPILER}) |
| matter_add_gn_arg_string("zephyr_cxx" ${CMAKE_CXX_COMPILER}) |
| matter_add_gn_arg_bool ("chip_logging" CONFIG_LOG) |
| matter_add_gn_arg_bool ("chip_enable_openthread" CONFIG_NET_L2_OPENTHREAD) |
| matter_add_gn_arg_bool ("chip_openthread_ftd" CONFIG_OPENTHREAD_FTD) |
| matter_add_gn_arg_bool ("chip_config_network_layer_ble" CONFIG_BT) |
| matter_add_gn_arg_bool ("chip_inet_config_enable_ipv4" CONFIG_CHIP_IPV4) |
| matter_add_gn_arg_bool ("chip_enable_nfc" CONFIG_CHIP_NFC_COMMISSIONING) |
| matter_add_gn_arg_bool ("chip_enable_ota_requestor" CONFIG_CHIP_OTA_REQUESTOR) |
| matter_add_gn_arg_bool ("chip_inet_config_enable_tcp_endpoint" FALSE) |
| matter_add_gn_arg_bool ("chip_error_logging" CONFIG_MATTER_LOG_LEVEL GREATER_EQUAL 1) |
| matter_add_gn_arg_bool ("chip_progress_logging" CONFIG_MATTER_LOG_LEVEL GREATER_EQUAL 3) |
| matter_add_gn_arg_bool ("chip_detail_logging" CONFIG_MATTER_LOG_LEVEL GREATER_EQUAL 4) |
| matter_add_gn_arg_bool ("chip_automation_logging" FALSE) |
| matter_add_gn_arg_bool ("chip_enable_wifi" CONFIG_WIFI_W91) |
| matter_add_gn_arg_bool ("chip_enable_icd_server" CONFIG_CHIP_ENABLE_ICD_SUPPORT) |
| matter_add_gn_arg_bool ("chip_enable_factory_data" CONFIG_CHIP_FACTORY_DATA) |
| matter_add_gn_arg_bool ("chip_mdns_minimal" CONFIG_WIFI_W91) |
| matter_add_gn_arg_bool ("chip_mdns_platform" CONFIG_NET_L2_OPENTHREAD) |
| |
| if (CONFIG_CHIP_ENABLE_ICD_SUPPORT) |
| matter_add_gn_arg_bool ("chip_enable_icd_lit" CONFIG_CHIP_ICD_LIT_SUPPORT) |
| matter_add_gn_arg_bool ("chip_enable_icd_checkin" CONFIG_CHIP_ICD_CHECK_IN_SUPPORT) |
| matter_add_gn_arg_bool ("chip_enable_icd_user_active_mode_trigger" CONFIG_CHIP_ICD_UAT_SUPPORT) |
| endif() |
| |
| if (CONFIG_CHIP_FACTORY_DATA OR CONFIG_CHIP_FACTORY_DATA_CUSTOM_BACKEND) |
| matter_add_gn_arg_bool("chip_use_transitional_commissionable_data_provider" FALSE) |
| matter_add_gn_arg_bool("chip_use_transitional_device_instance_info_provider" FALSE) |
| endif() |
| |
| if (CONFIG_CHIP_ROTATING_DEVICE_ID) |
| matter_add_gn_arg_bool("chip_enable_rotating_device_id" TRUE) |
| matter_add_gn_arg_bool("chip_enable_additional_data_advertising" TRUE) |
| endif() |
| |
| if (CONFIG_WIFI_W91) |
| matter_add_gn_arg_string("chip_mdns" "minimal") |
| elseif (CONFIG_NET_L2_OPENTHREAD) |
| matter_add_gn_arg_string("chip_mdns" "platform") |
| else() |
| matter_add_gn_arg_string("chip_mdns" "none") |
| endif() |
| |
| if (CONFIG_CHIP_PW_RPC) |
| set(PIGWEED_DIR "//third_party/pigweed/repo") |
| matter_add_gn_arg_string("pw_assert_BACKEND" ${PIGWEED_DIR}/pw_assert_log:check_backend) |
| matter_add_gn_arg_string("pw_log_BACKEND" ${PIGWEED_DIR}/pw_log_basic) |
| matter_add_gn_arg("pw_build_LINK_DEPS" [\"${PIGWEED_DIR}/pw_assert:impl\",\ \"${PIGWEED_DIR}/pw_log:impl\"]) |
| endif() |
| |
| matter_generate_args_tmp_file() |
| |
| # ============================================================================== |
| # Build chip library |
| # ============================================================================== |
| |
| matter_build(chip |
| LIB_SHELL ${CONFIG_CHIP_LIB_SHELL} |
| DEVICE_INFO_EXAMPLE_PROVIDER ${CONFIG_CHIP_EXAMPLE_DEVICE_INFO_PROVIDER} |
| GN_DEPENDENCIES kernel |
| ) |
| set_property(GLOBAL APPEND PROPERTY ZEPHYR_INTERFACE_LIBS chip) |
| |
| include(${TELINK_COMMON}/common.cmake) |
| |
| if (CONFIG_CHIP_APP_LOG_LEVEL GREATER_EQUAL 4) |
| include(${TELINK_COMMON}/build_info.cmake) |
| endif() |
| |
| # ============================================================================== |
| # Define 'process_binaries' target for collecting final binary to flash |
| # ============================================================================== |
| |
| add_custom_target( |
| process_binaries ALL |
| COMMAND ${Python3_EXECUTABLE} ${CHIP_ROOT}/scripts/tools/telink/process_binaries.py |
| WORKING_DIRECTORY ${PROJECT_BINARY_DIR} |
| ) |
| add_dependencies(process_binaries ${ZEPHYR_FINAL_EXECUTABLE}) |
| |
| # ============================================================================== |
| # Define 'build_mcuboot' target for building the MCUBoot bootloader |
| # ============================================================================== |
| |
| if (CONFIG_BOOTLOADER_MCUBOOT AND CONFIG_SOC_SERIES_RISCV_TELINK_B9X) |
| add_custom_target(build_mcuboot ALL |
| COMMAND |
| west build -b ${BASE_BOARD} -d build_mcuboot ${ZEPHYR_BASE}/../bootloader/mcuboot/boot/zephyr |
| -- -DOVERLAY_CONFIG=${GLOBAL_BOOT_CONF_OVERLAY_FILE} -DDTC_OVERLAY_FILE="${GLOBAL_BOOT_DTC_OVERLAY_FILE};${FLASH_DTC_OVERLAY_FILE};${USB_BOOT_DTC_OVERLAY_FILE};${MARS_BOOT_DTC_OVERLAY_FILE}" |
| COMMAND |
| cp ${PROJECT_BINARY_DIR}/../modules/chip-module/build_mcuboot/zephyr/zephyr.bin ${PROJECT_BINARY_DIR}/mcuboot.bin |
| ) |
| endif() |
| |
| # ============================================================================== |
| # Define 'chip-ota-image' target for building CHIP OTA image |
| # ============================================================================== |
| |
| if (CONFIG_CHIP_OTA_IMAGE_BUILD) |
| if (CONFIG_COMPRESS_LZMA) |
| add_custom_command( |
| OUTPUT ${PROJECT_BINARY_DIR}/${CONFIG_SIGNED_OTA_IMAGE_FILE_NAME} |
| COMMAND ${CMAKE_COMMAND} -E true |
| COMMENT "Fake command, ${CONFIG_SIGNED_OTA_IMAGE_FILE_NAME} file created in process_binaries target" |
| DEPENDS ${ZEPHYR_FINAL_EXECUTABLE} |
| ) |
| endif() |
| |
| chip_ota_image(chip-ota-image |
| INPUT_FILES ${PROJECT_BINARY_DIR}/${CONFIG_SIGNED_OTA_IMAGE_FILE_NAME} |
| OUTPUT_FILE ${PROJECT_BINARY_DIR}/${CONFIG_CHIP_OTA_IMAGE_FILE_NAME} |
| ) |
| add_dependencies(chip-ota-image process_binaries) |
| endif() |
| |
| # ============================================================================== |
| # Define 'factory_data' target for generating a factory data partition |
| # ============================================================================== |
| |
| if (CONFIG_CHIP_FACTORY_DATA_BUILD) |
| telink_generate_factory_data() |
| endif() |
| |
| endif() # CONFIG_CHIP |