| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 33.1.1. [TC-FLW-1.1] Global attributes with server as DUT |
| |
| PICS: |
| - FLW.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Flow Measurement" |
| endpoint: 1 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Read the global attribute: ClusterRevision" |
| PICS: FLW.S.Afffd |
| command: "readAttribute" |
| attribute: "ClusterRevision" |
| response: |
| value: 3 |
| constraints: |
| type: int16u |
| |
| - label: "Read the global attribute: FeatureMap" |
| PICS: FLW.S.Afffc |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| value: 0 |
| constraints: |
| type: bitmap32 |
| |
| - label: "Read the global attribute: AttributeList" |
| PICS: FLW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [0, 1, 2, 65528, 65529, 65530, 65531, 65532, 65533] |
| |
| - label: "Read the optional attribute(Tolerance) in AttributeList" |
| PICS: FLW.S.A0003 && FLW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [3] |
| |
| #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570 |
| - label: |
| "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE) 2.The list |
| MAY contain values in the Manufacturer Extensible Identifier (MEI) |
| range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed MEI |
| range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list |
| SHALL NOT contain any values in the Test Vendor or invalid range: |
| (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool flowmeasurement read attribute-list 1 1 |
| |
| Verify " AttributeList " value consists the list of mandatory attributes (0, 1, 2), global attributes (65528, 65529, 65530, 65531, 65532, 65533) and if DUT supports it lists optional attribute (value 3 ) in RPI on the TH(Chip-tool) Log: |
| |
| [1676283744.634470][6703:6705] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFFB DataVersion: 1355474720 |
| [1676283744.634550][6703:6705] CHIP:TOO: AttributeList: 10 entries |
| [1676283744.634571][6703:6705] CHIP:TOO: [1]: 0 |
| [1676283744.634585][6703:6705] CHIP:TOO: [2]: 1 |
| [1676283744.634597][6703:6705] CHIP:TOO: [3]: 2 |
| [1676283744.634611][6703:6705] CHIP:TOO: [4]: 3 |
| [1676283744.634625][6703:6705] CHIP:TOO: [5]: 65528 |
| [1676283744.634639][6703:6705] CHIP:TOO: [6]: 65529 |
| [1676283744.634653][6703:6705] CHIP:TOO: [7]: 65530 |
| [1676283744.634667][6703:6705] CHIP:TOO: [8]: 65531 |
| [1676283744.634681][6703:6705] CHIP:TOO: [9]: 65532 |
| [1676283744.634695][6703:6705] CHIP:TOO: [10]: 65533 |
| [1676283744.634854][6703:6705] CHIP:EM: <<< [E:1353i M:55876299 (Ack:134302507)] (S) Msg TX to 1:00000000 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLW.S.Afffb |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads EventList attribute from DUT. 1.The list MAY contain values |
| in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored. 2.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool flowmeasurement read event-list 1 1 |
| |
| Verify "EventList " consists the list of supported events, Also verify that the DUT response with an empty list (0 entries) if there is no events on the TH(Chip-tool) Log: |
| |
| [1676363157.137814][9032:9034] CHIP:DMG: } |
| [1676363157.137855][9032:9034] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFFA DataVersion: 2916521407 |
| [1676363157.137868][9032:9034] CHIP:TOO: EventList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLW.S.Afffa |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads AcceptedCommandList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_00FF). 2.The list MAY contain values in the |
| Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored.3.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool flowmeasurement read accepted-command-list 1 1 |
| |
| Verify "AcceptedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no accepted command on the TH(Chip-tool) Log: |
| |
| [1676360099.158978][8526:8528] CHIP:DMG: } |
| [1676360099.159130][8526:8528] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFF9 DataVersion: 2916521407 |
| [1676360099.159185][8526:8528] CHIP:TOO: AcceptedCommandList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLW.S.Afff9 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool flowmeasurement read generated-command-list 1 1 |
| |
| Verify " GeneratedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no generated command on the TH(Chip-tool) Log: |
| |
| [1676360138.548225][8539:8541] CHIP:DMG: } |
| [1676360138.548265][8539:8541] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0404 Attribute 0x0000_FFF8 DataVersion: 2916521407 |
| [1676360138.548281][8539:8541] CHIP:TOO: GeneratedCommandList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLW.S.Afff8 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |