| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * Copyright (c) 2020 Texas Instruments Incorporated |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* definition needed to ensure the OAD image header has room for the ecdsa sig */ |
| #define SECURITY |
| #include <ti/common/cc26xx/oad/oad_image_header.h> |
| |
| // clang-format off |
| |
| #define MY_APP_SOFTWARE_VER { '0', '0', '0', '1' } |
| |
| #if defined(__GNUC__) |
| |
| /* provided by the linkerfile */ |
| extern char _flash_end_address; |
| extern char _intvecs_base_address; |
| |
| #define FLASH_END_ADDRESS ((uint32_t)(&_flash_end_address)) |
| #define RESET_VECT_ADDRESS ((uint32_t)(&_intvecs_base_address)) |
| |
| const imgHdr_t __attribute__((section( ".oad_image_header"))) __attribute__((used)) oad_image_header = |
| #else |
| |
| #error "compiler currently note supported" |
| |
| #endif |
| |
| { |
| .fixedHdr = { |
| .imgID = OAD_IMG_ID_VAL, // User-defined Image Identification bytes |
| .crc32 = DEFAULT_CRC, // Image's 32-bit CRC value |
| .bimVer = BIM_VER, // BIM version |
| .metaVer = META_VER, // Metadata version |
| .techType = OAD_WIRELESS_TECH_THREAD, // Wireless protocol type BLE/TI-MAC/ZIGBEE etc. |
| .imgCpStat = DEFAULT_STATE, // Image copy status |
| .crcStat = DEFAULT_STATE, // CRC status |
| .imgType = OAD_IMG_TYPE_APP, // Image Type |
| .imgNo = 0x0, // Image number of 'image type' |
| .imgVld = DEFAULT_STATE, // Image validation bytes, used by BIM. |
| .len = INVALID_LEN, // Image length in bytes. |
| .prgEntry = RESET_VECT_ADDRESS, // Program entry address |
| .softVer = MY_APP_SOFTWARE_VER, // Software version of the image |
| .imgEndAddr = FLASH_END_ADDRESS, // Address of the last byte of a contiguous image |
| .hdrLen = OAD_IMG_FULL_HDR_LEN, // Total length of the image header |
| .rfu = 0xFFFF, // Reserved bytes |
| }, |
| #if (defined(SECURITY)) |
| .secInfoSeg = { |
| .segTypeSecure = IMG_SECURITY_SEG_ID, // Segment type - for Secuirty info payload |
| .wirelessTech = OAD_WIRELESS_TECH_THREAD, // Wireless technology type |
| .verifStat = DEFAULT_STATE, // Verification status |
| .secSegLen = SECURITY_SEG_LEN, // Payload segment length |
| .secVer = SECURITY_VER, // Security version |
| .secTimestamp = 0x0, // Security timestamp, filled by python script |
| .secSignerInfo = {0}, // filled by python script |
| /* .eccSign, filled by python script */ |
| }, |
| #endif |
| .imgPayload = { |
| .segTypeImg = IMG_PAYLOAD_SEG_ID, // Segment type - for Contiguous image payload |
| .wirelessTech = OAD_WIRELESS_TECH_THREAD, // Wireless technology type |
| .rfu = 0, // Reserved bytes |
| .imgSegLen = 0, // filled by python script |
| .startAddr = (uint32_t)(&oad_image_header), // Start address of image on internal flash |
| }, |
| }; |