| /* |
| * |
| * Copyright (c) 2023 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <app-common/zap-generated/attributes/Accessors.h> |
| #include <app-common/zap-generated/ids/Attributes.h> |
| #include <app-common/zap-generated/ids/Clusters.h> |
| #include <app/icd/server/ICDConfigurationData.h> |
| #include <app/icd/server/ICDManager.h> |
| #include <app/icd/server/ICDServerConfig.h> |
| #include <lib/core/ClusterEnums.h> |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <platform/ConnectivityManager.h> |
| #include <platform/LockTracker.h> |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| namespace { |
| enum class ICDTestEventTriggerEvent : uint64_t |
| { |
| kAddActiveModeReq = 0x0046'0000'00000001, |
| kRemoveActiveModeReq = 0x0046'0000'00000002, |
| kInvalidateHalfCounterValues = 0x0046'0000'00000003, |
| kInvalidateAllCounterValues = 0x0046'0000'00000004, |
| kForceMaximumCheckInBackOffState = 0x0046'0000'00000005, |
| kDSLSForceSitMode = 0x0046'0000'00000006, |
| kDSLSWithdrawSitMode = 0x0046'0000'00000007, |
| }; |
| } // namespace |
| |
| namespace chip { |
| namespace app { |
| |
| using namespace chip::app; |
| using namespace chip::app::Clusters; |
| using namespace chip::app::Clusters::IcdManagement; |
| using namespace System::Clock; |
| |
| using chip::Protocols::InteractionModel::Status; |
| |
| static_assert(UINT8_MAX >= CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS, |
| "ICDManager::mOpenExchangeContextCount cannot hold count for the max exchange count"); |
| |
| void ICDManager::Init() |
| { |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| VerifyOrDie(mStorage != nullptr); |
| VerifyOrDie(mFabricTable != nullptr); |
| VerifyOrDie(mSymmetricKeystore != nullptr); |
| VerifyOrDie(mExchangeManager != nullptr); |
| VerifyOrDie(mSubInfoProvider != nullptr); |
| VerifyOrDie(mICDCheckInBackOffStrategy != nullptr); |
| |
| VerifyOrDie(ICDConfigurationData::GetInstance().GetICDCounter().Init(mStorage, DefaultStorageKeyAllocator::ICDCheckInCounter(), |
| ICDConfigurationData::kICDCounterPersistenceIncrement) == |
| CHIP_NO_ERROR); |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| #if CHIP_CONFIG_ENABLE_ICD_LIT |
| // LIT ICD Verification Checks |
| if (SupportsFeature(Feature::kLongIdleTimeSupport)) |
| { |
| VerifyOrDieWithMsg(SupportsFeature(Feature::kCheckInProtocolSupport), AppServer, |
| "The CheckIn protocol feature is required for LIT support."); |
| VerifyOrDieWithMsg(SupportsFeature(Feature::kUserActiveModeTrigger), AppServer, |
| "The user ActiveMode trigger feature is required for LIT support."); |
| VerifyOrDieWithMsg(ICDConfigurationData::GetInstance().GetMinLitActiveModeThreshold() <= |
| ICDConfigurationData::GetInstance().GetActiveModeThreshold(), |
| AppServer, "The minimum ActiveModeThreshold value for a LIT ICD is 5 seconds."); |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_LIT |
| |
| VerifyOrDie(ICDNotifier::GetInstance().Subscribe(this) == CHIP_NO_ERROR); |
| |
| UpdateICDMode(); |
| UpdateOperationState(OperationalState::IdleMode); |
| } |
| |
| void ICDManager::Shutdown() |
| { |
| ICDNotifier::GetInstance().Unsubscribe(this); |
| |
| // cancel any running timer of the icd |
| DeviceLayer::SystemLayer().CancelTimer(OnIdleModeDone, this); |
| DeviceLayer::SystemLayer().CancelTimer(OnActiveModeDone, this); |
| DeviceLayer::SystemLayer().CancelTimer(OnTransitionToIdle, this); |
| |
| ICDConfigurationData::GetInstance().SetICDMode(ICDConfigurationData::ICDMode::SIT); |
| mOperationalState = OperationalState::ActiveMode; |
| mStateObserverPool.ReleaseAll(); |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| mStorage = nullptr; |
| mFabricTable = nullptr; |
| mSubInfoProvider = nullptr; |
| mICDSenderPool.ReleaseAll(); |
| |
| #if CHIP_CONFIG_PERSIST_SUBSCRIPTIONS && !CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| mIsBootUpResumeSubscriptionExecuted = false; |
| #endif // CHIP_CONFIG_PERSIST_SUBSCRIPTIONS && !CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| } |
| |
| bool ICDManager::SupportsFeature(Feature feature) |
| { |
| // Can't use attribute accessors/Attributes::FeatureMap::Get in unit tests |
| #if !CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| uint32_t featureMap = 0; |
| bool success = (Attributes::FeatureMap::Get(kRootEndpointId, &featureMap) == Status::Success); |
| return success ? ((featureMap & to_underlying(feature)) != 0) : false; |
| #else |
| return ((mFeatureMap & to_underlying(feature)) != 0); |
| #endif // !CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| } |
| |
| uint32_t ICDManager::StayActiveRequest(uint32_t stayActiveDuration) |
| { |
| // This should only be called when the device is in ActiveMode |
| VerifyOrReturnValue(mOperationalState == OperationalState::ActiveMode, 0); |
| |
| uint32_t promisedActiveDuration = |
| std::min(ICDConfigurationData::GetInstance().GetGuaranteedStayActiveDuration().count(), stayActiveDuration); |
| |
| // If the device is already in ActiveMode, we need to extend the active mode duration |
| // for whichever is smallest between 30000 milliseconds and stayActiveDuration, taking in account the remaining active time. |
| ExtendActiveMode(System::Clock::Milliseconds16(promisedActiveDuration)); |
| promisedActiveDuration = DeviceLayer::SystemLayer().GetRemainingTime(OnActiveModeDone, this).count(); |
| |
| return promisedActiveDuration; |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| void ICDManager::SendCheckInMsgs() |
| { |
| #if !CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| VerifyOrDie(mStorage != nullptr); |
| VerifyOrDie(mFabricTable != nullptr); |
| |
| uint32_t counterValue = ICDConfigurationData::GetInstance().GetICDCounter().GetNextCheckInCounterValue(); |
| bool counterIncremented = false; |
| |
| for (const auto & fabricInfo : *mFabricTable) |
| { |
| uint16_t supported_clients = ICDConfigurationData::GetInstance().GetClientsSupportedPerFabric(); |
| |
| ICDMonitoringTable table(*mStorage, fabricInfo.GetFabricIndex(), supported_clients /*Table entry limit*/, |
| mSymmetricKeystore); |
| |
| if (table.IsEmpty()) |
| { |
| continue; |
| } |
| |
| for (uint16_t i = 0; i < table.Limit(); i++) |
| { |
| ICDMonitoringEntry entry(mSymmetricKeystore); |
| CHIP_ERROR err = table.Get(i, entry); |
| if (err == CHIP_ERROR_NOT_FOUND) |
| { |
| break; |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| // Try to fetch the next entry upon failure (should not happen). |
| ChipLogError(AppServer, "Failed to retrieved ICDMonitoring entry for Check-In msg, will try next entry."); |
| continue; |
| } |
| |
| if (!ShouldCheckInMsgsBeSentAtActiveModeFunction(entry.fabricIndex, entry.monitoredSubject)) |
| { |
| continue; |
| } |
| |
| if (!mICDCheckInBackOffStrategy->ShouldSendCheckInMessage(entry)) |
| { |
| // continue to next entry |
| continue; |
| } |
| |
| // Increment counter only once to prevent depletion of the available range. |
| if (!counterIncremented) |
| { |
| counterIncremented = true; |
| |
| if (CHIP_NO_ERROR != ICDConfigurationData::GetInstance().GetICDCounter().Advance()) |
| { |
| ChipLogError(AppServer, "Incremented ICDCounter but failed to access/save to Persistent storage"); |
| } |
| } |
| |
| // SenderPool will be released upon transition from active to idle state |
| // This will happen when all ICD Check-In messages are sent on the network |
| ICDCheckInSender * sender = mICDSenderPool.CreateObject(mExchangeManager); |
| VerifyOrReturn(sender != nullptr, ChipLogError(AppServer, "Failed to allocate ICDCheckinSender")); |
| |
| if (CHIP_NO_ERROR != sender->RequestResolve(entry, mFabricTable, counterValue)) |
| { |
| ChipLogError(AppServer, "Failed to send ICD Check-In"); |
| } |
| } |
| } |
| #endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| } |
| |
| bool ICDManager::CheckInMessagesWouldBeSent(const std::function<ShouldCheckInMsgsBeSentFunction> & shouldCheckInMsgsBeSentFunction) |
| { |
| VerifyOrReturnValue(shouldCheckInMsgsBeSentFunction, false); |
| |
| for (const auto & fabricInfo : *mFabricTable) |
| { |
| uint16_t supported_clients = ICDConfigurationData::GetInstance().GetClientsSupportedPerFabric(); |
| |
| ICDMonitoringTable table(*mStorage, fabricInfo.GetFabricIndex(), supported_clients /*Table entry limit*/, |
| mSymmetricKeystore); |
| if (table.IsEmpty()) |
| { |
| continue; |
| } |
| |
| for (uint16_t i = 0; i < table.Limit(); i++) |
| { |
| ICDMonitoringEntry entry(mSymmetricKeystore); |
| CHIP_ERROR err = table.Get(i, entry); |
| if (err == CHIP_ERROR_NOT_FOUND) |
| { |
| break; |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| // Try to fetch the next entry upon failure (should not happen). |
| ChipLogError(AppServer, "Failed to retrieved ICDMonitoring entry, will try next entry."); |
| continue; |
| } |
| |
| if (entry.clientType == ClientTypeEnum::kEphemeral) |
| { |
| // If the registered client is ephemeral, no Check-In message would be sent to this client |
| continue; |
| } |
| |
| // At least one registration would require a Check-In message |
| VerifyOrReturnValue(!shouldCheckInMsgsBeSentFunction(entry.fabricIndex, entry.monitoredSubject), true); |
| } |
| } |
| |
| // None of the registrations would require a Check-In message |
| return false; |
| } |
| |
| /** |
| * ShouldCheckInMsgsBeSentAtActiveModeFunction is used to determine if a Check-In message is required for a given registration. |
| * Due to how the ICD Check-In use-case interacts with the persistent subscription and subscription timeout resumption features, |
| * having a single implementation of the function renders the implementation very difficult to understand and maintain. |
| * Because of this, each valid feature combination has its own implementation of the function. |
| */ |
| #if CHIP_CONFIG_PERSIST_SUBSCRIPTIONS |
| #if CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| /** |
| * @brief Implementation for when the persistent subscription and subscription timeout resumption feature are present. |
| * Function checks that there are no active or persisted subscriptions for a given fabricIndex or subjectID. |
| * |
| * @note When the persistent subscription and subscription timeout resumption feature are present, we need to check for |
| * persisted subscription at each transition to ActiveMode since there will be persisted subscriptions during normal |
| * operation for the subscription timeout resumption feature. Once we have finished all our subscription resumption attempts |
| * for a given subscription, the entry is deleted from persisted storage which will enable us to send Check-In messages for |
| * the client registration. This logic avoids the device sending a Check-In message while trying to resume subscriptions. |
| * |
| * @param aFabricIndex |
| * @param subjectID subjectID to check. Can be an operational node id or a CAT |
| * |
| * @return true Returns true if the fabricIndex and subjectId combination does not have an active or a persisted subscription. |
| * @return false Returns false if the fabricIndex and subjectId combination has an active or persisted subscription. |
| */ |
| bool ICDManager::ShouldCheckInMsgsBeSentAtActiveModeFunction(FabricIndex aFabricIndex, NodeId subjectID) |
| { |
| return !(mSubInfoProvider->SubjectHasActiveSubscription(aFabricIndex, subjectID) || |
| mSubInfoProvider->SubjectHasPersistedSubscription(aFabricIndex, subjectID)); |
| } |
| #else |
| /** |
| * @brief Implementation for when the persistent subscription feature is present without the subscription timeout resumption |
| * feature. Function checks that there are no active subscriptions. If the boot up subscription resumption has not been completed, |
| * function also checks if there are persisted subscriptions. |
| * |
| * @note The persistent subscriptions feature tries to resume subscriptions at the highest min interval |
| * of all the persisted subscriptions. As such, it is possible for the ICD to return to Idle Mode |
| * until the timer elaspses. We do not want to send Check-In messages to clients with persisted subscriptions |
| * until we have tried to resubscribe. |
| * |
| * @param aFabricIndex |
| * @param subjectID subjectID to check. Can be an opperationnal node id or a CAT |
| * |
| * @return true Returns true if the fabricIndex and subjectId combination does not have an active subscription. |
| * If the boot up subscription resumption has not been completed, there must not be a persisted subscription either. |
| * @return false Returns false if the fabricIndex and subjectId combination has an active subscription. |
| * If the boot up subscription resumption has not been completed, |
| * returns false if the fabricIndex and subjectId combination has a persisted subscription. |
| */ |
| bool ICDManager::ShouldCheckInMsgsBeSentAtActiveModeFunction(FabricIndex aFabricIndex, NodeId subjectID) |
| { |
| bool mightHaveSubscription = mSubInfoProvider->SubjectHasActiveSubscription(aFabricIndex, subjectID); |
| if (!mightHaveSubscription && !mIsBootUpResumeSubscriptionExecuted) |
| { |
| mightHaveSubscription = mSubInfoProvider->SubjectHasPersistedSubscription(aFabricIndex, subjectID); |
| } |
| |
| return !mightHaveSubscription; |
| } |
| #endif // CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| #else |
| /** |
| * @brief Implementation for when neither the persistent subscription nor the subscription timeout resumption features are present. |
| * Function checks that there no active sbuscriptions for a given fabricIndex and subjectId combination. |
| * |
| * @note When neither the persistent subscription nor the subscription timeout resumption features are present, we only need to |
| * check for active subscription since we will never have any persisted subscription. |
| * |
| * @param aFabricIndex |
| * @param subjectID subjectID to check. Can be an opperationnal node id or a CAT |
| * |
| * @return true Returns true if the fabricIndex and subjectId combination does not have an active subscription. |
| * @return false Returns false if the fabricIndex and subjectId combination has an active subscription. |
| */ |
| bool ICDManager::ShouldCheckInMsgsBeSentAtActiveModeFunction(FabricIndex aFabricIndex, NodeId subjectID) |
| { |
| return !(mSubInfoProvider->SubjectHasActiveSubscription(aFabricIndex, subjectID)); |
| } |
| #endif // CHIP_CONFIG_PERSIST_SUBSCRIPTIONS |
| |
| void ICDManager::TriggerCheckInMessages(const std::function<ShouldCheckInMsgsBeSentFunction> & verifier) |
| { |
| VerifyOrReturn(SupportsFeature(Feature::kCheckInProtocolSupport)); |
| |
| // Only trigger Check-In messages when we are in IdleMode. |
| // If we are already in ActiveMode, Check-In messages have already been sent. |
| VerifyOrReturn(mOperationalState == OperationalState::IdleMode); |
| |
| // If we don't have any Check-In messages to send, do nothing |
| VerifyOrReturn(CheckInMessagesWouldBeSent(verifier)); |
| UpdateOperationState(OperationalState::ActiveMode); |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| void ICDManager::UpdateICDMode() |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| ICDConfigurationData::ICDMode tempMode = ICDConfigurationData::ICDMode::SIT; |
| |
| #if CHIP_CONFIG_ENABLE_ICD_LIT |
| // Device can only switch to the LIT operating mode if LIT support is present |
| if (SupportsFeature(Feature::kLongIdleTimeSupport)) |
| { |
| #if CHIP_CONFIG_ENABLE_ICD_DSLS |
| // Ensure SIT mode is not requested |
| if (SupportsFeature(Feature::kDynamicSitLitSupport) && !mSITModeRequested) |
| { |
| #endif // CHIP_CONFIG_ENABLE_ICD_DSLS |
| |
| VerifyOrDie(mStorage != nullptr); |
| VerifyOrDie(mFabricTable != nullptr); |
| // We can only get to LIT Mode, if at least one client is registered with the ICD device |
| for (const auto & fabricInfo : *mFabricTable) |
| { |
| // We only need 1 valid entry to ensure LIT compliance |
| ICDMonitoringTable table(*mStorage, fabricInfo.GetFabricIndex(), 1 /*Table entry limit*/, mSymmetricKeystore); |
| if (!table.IsEmpty()) |
| { |
| tempMode = ICDConfigurationData::ICDMode::LIT; |
| break; |
| } |
| } |
| #if CHIP_CONFIG_ENABLE_ICD_DSLS |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_DSLS |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_LIT |
| |
| if (ICDConfigurationData::GetInstance().GetICDMode() != tempMode) |
| { |
| ICDConfigurationData::GetInstance().SetICDMode(tempMode); |
| |
| // Can't use attribute accessors/Attributes::OperatingMode::Set in unit tests |
| #if !CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| Attributes::OperatingMode::Set(kRootEndpointId, static_cast<OperatingModeEnum>(tempMode)); |
| #endif |
| |
| postObserverEvent(ObserverEventType::ICDModeChange); |
| } |
| |
| // When in SIT mode, the slow poll interval SHOULDN'T be greater than the SIT mode polling threshold, per spec. |
| if (ICDConfigurationData::GetInstance().GetICDMode() == ICDConfigurationData::ICDMode::SIT && |
| ICDConfigurationData::GetInstance().GetSlowPollingInterval() > ICDConfigurationData::GetInstance().GetSITPollingThreshold()) |
| { |
| ChipLogDetail(AppServer, "The Slow Polling Interval of an ICD in SIT mode should be <= %" PRIu32 " seconds", |
| (ICDConfigurationData::GetInstance().GetSITPollingThreshold().count() / 1000)); |
| } |
| } |
| |
| void ICDManager::UpdateOperationState(OperationalState state) |
| { |
| assertChipStackLockedByCurrentThread(); |
| // Active mode can be re-triggered. |
| VerifyOrReturn(mOperationalState != state || state == OperationalState::ActiveMode); |
| |
| if (state == OperationalState::IdleMode) |
| { |
| mOperationalState = OperationalState::IdleMode; |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| std::function<ShouldCheckInMsgsBeSentFunction> sendCheckInMessagesOnActiveMode = |
| std::bind(&ICDManager::ShouldCheckInMsgsBeSentAtActiveModeFunction, this, std::placeholders::_1, std::placeholders::_2); |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| // When the active mode interval is 0, we stay in idleMode until a notification brings the icd into active mode |
| // unless the device would need to send Check-In messages |
| if (ICDConfigurationData::GetInstance().GetActiveModeDuration() > kZero |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| || CheckInMessagesWouldBeSent(sendCheckInMessagesOnActiveMode) |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| ) |
| { |
| DeviceLayer::SystemLayer().StartTimer(ICDConfigurationData::GetInstance().GetIdleModeDuration(), OnIdleModeDone, this); |
| } |
| |
| Milliseconds32 slowPollInterval = ICDConfigurationData::GetInstance().GetSlowPollingInterval(); |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| // Going back to Idle, all Check-In messages are sent |
| mICDSenderPool.ReleaseAll(); |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| CHIP_ERROR err = DeviceLayer::ConnectivityMgr().SetPollingInterval(slowPollInterval); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(AppServer, "Failed to set Slow Polling Interval: err %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| postObserverEvent(ObserverEventType::EnterIdleMode); |
| } |
| else if (state == OperationalState::ActiveMode) |
| { |
| if (mOperationalState == OperationalState::IdleMode) |
| { |
| // An event could have brought us to the active mode. |
| // Make sure the idle mode timer is stopped |
| DeviceLayer::SystemLayer().CancelTimer(OnIdleModeDone, this); |
| |
| mOperationalState = OperationalState::ActiveMode; |
| Milliseconds32 activeModeDuration = ICDConfigurationData::GetInstance().GetActiveModeDuration(); |
| |
| if (activeModeDuration == kZero && !mKeepActiveFlags.HasAny()) |
| { |
| // Network Activity triggered the active mode and activeModeDuration is 0. |
| // Stay active for at least Active Mode Threshold. |
| activeModeDuration = ICDConfigurationData::GetInstance().GetActiveModeThreshold(); |
| } |
| |
| DeviceLayer::SystemLayer().StartTimer(activeModeDuration, OnActiveModeDone, this); |
| |
| Milliseconds32 activeModeJitterInterval = Milliseconds32(ICD_ACTIVE_TIME_JITTER_MS); |
| // TODO(#33074): Edge case when we transition to IdleMode with this condition being true |
| // (activeModeDuration == kZero && !mKeepActiveFlags.HasAny()) |
| activeModeJitterInterval = |
| (activeModeDuration >= activeModeJitterInterval) ? activeModeDuration - activeModeJitterInterval : kZero; |
| |
| // Reset this flag when we enter ActiveMode to avoid having a feedback loop that keeps us indefinitly in |
| // ActiveMode. |
| mTransitionToIdleCalled = false; |
| DeviceLayer::SystemLayer().StartTimer(activeModeJitterInterval, OnTransitionToIdle, this); |
| |
| CHIP_ERROR err = |
| DeviceLayer::ConnectivityMgr().SetPollingInterval(ICDConfigurationData::GetInstance().GetFastPollingInterval()); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(AppServer, "Failed to set Fast Polling Interval: err %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| if (SupportsFeature(Feature::kCheckInProtocolSupport)) |
| { |
| SendCheckInMsgs(); |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| postObserverEvent(ObserverEventType::EnterActiveMode); |
| } |
| else |
| { |
| ExtendActiveMode(ICDConfigurationData::GetInstance().GetActiveModeThreshold()); |
| } |
| } |
| } |
| |
| void ICDManager::SetKeepActiveModeRequirements(KeepActiveFlags flag, bool state) |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| mKeepActiveFlags.Set(flag, state); |
| if (mOperationalState == OperationalState::IdleMode && mKeepActiveFlags.HasAny()) |
| { |
| UpdateOperationState(OperationalState::ActiveMode); |
| } |
| else if (mOperationalState == OperationalState::ActiveMode && !mKeepActiveFlags.HasAny() && |
| !DeviceLayer::SystemLayer().IsTimerActive(OnActiveModeDone, this)) |
| { |
| // The normal active period had ended and nothing else requires the system to be active. |
| UpdateOperationState(OperationalState::IdleMode); |
| } |
| } |
| |
| void ICDManager::OnIdleModeDone(System::Layer * aLayer, void * appState) |
| { |
| ICDManager * pICDManager = reinterpret_cast<ICDManager *>(appState); |
| pICDManager->UpdateOperationState(OperationalState::ActiveMode); |
| } |
| |
| void ICDManager::OnActiveModeDone(System::Layer * aLayer, void * appState) |
| { |
| ICDManager * pICDManager = reinterpret_cast<ICDManager *>(appState); |
| |
| // Don't go to idle mode when we have a keep active requirement |
| if (!pICDManager->mKeepActiveFlags.HasAny()) |
| { |
| pICDManager->UpdateOperationState(OperationalState::IdleMode); |
| } |
| } |
| |
| void ICDManager::OnTransitionToIdle(System::Layer * aLayer, void * appState) |
| { |
| ICDManager * pICDManager = reinterpret_cast<ICDManager *>(appState); |
| |
| // OnTransitionToIdle will trigger a report message if reporting is needed, which should extend the active mode until the |
| // ack for the report is received. |
| pICDManager->mTransitionToIdleCalled = true; |
| pICDManager->postObserverEvent(ObserverEventType::TransitionToIdle); |
| } |
| |
| /* ICDListener functions. */ |
| |
| void ICDManager::OnKeepActiveRequest(KeepActiveFlags request) |
| { |
| assertChipStackLockedByCurrentThread(); |
| VerifyOrReturn(request < KeepActiveFlagsValues::kInvalidFlag); |
| |
| if (request.Has(KeepActiveFlag::kExchangeContextOpen)) |
| { |
| // There can be multiple open exchange contexts at the same time. |
| // Keep track of the requests count. |
| this->mOpenExchangeContextCount++; |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| if (request.Has(KeepActiveFlag::kCheckInInProgress)) |
| { |
| // There can be multiple check-in at the same time. |
| // Keep track of the requests count. |
| this->mCheckInRequestCount++; |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| this->SetKeepActiveModeRequirements(request, true /* state */); |
| } |
| |
| void ICDManager::OnActiveRequestWithdrawal(KeepActiveFlags request) |
| { |
| assertChipStackLockedByCurrentThread(); |
| VerifyOrReturn(request < KeepActiveFlagsValues::kInvalidFlag); |
| |
| if (request.Has(KeepActiveFlag::kExchangeContextOpen)) |
| { |
| // There can be multiple open exchange contexts at the same time. |
| // Keep track of the requests count. |
| if (this->mOpenExchangeContextCount > 0) |
| { |
| this->mOpenExchangeContextCount--; |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "The ICD Manager did not account for ExchangeContext closure"); |
| } |
| |
| if (this->mOpenExchangeContextCount == 0) |
| { |
| this->SetKeepActiveModeRequirements(KeepActiveFlag::kExchangeContextOpen, false /* state */); |
| } |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| if (request.Has(KeepActiveFlag::kCheckInInProgress)) |
| { |
| // There can be multiple open exchange contexts at the same time. |
| // Keep track of the requests count. |
| if (this->mCheckInRequestCount > 0) |
| { |
| this->mCheckInRequestCount--; |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "The ICD Manager did not account for Check-In Sender start"); |
| } |
| |
| if (this->mCheckInRequestCount == 0) |
| { |
| this->SetKeepActiveModeRequirements(KeepActiveFlag::kCheckInInProgress, false /* state */); |
| } |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| |
| if (request.Has(KeepActiveFlag::kCommissioningWindowOpen) || request.Has(KeepActiveFlag::kFailSafeArmed)) |
| { |
| // Only 1 request per type (kCommissioningWindowOpen, kFailSafeArmed) |
| // remove requirement directly |
| this->SetKeepActiveModeRequirements(request, false /* state */); |
| } |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_DSLS |
| void ICDManager::OnSITModeRequest() |
| { |
| mSITModeRequested = true; |
| this->UpdateICDMode(); |
| // Update the poll interval also to comply with SIT requirements |
| UpdateOperationState(OperationalState::ActiveMode); |
| } |
| |
| void ICDManager::OnSITModeRequestWithdrawal() |
| { |
| mSITModeRequested = false; |
| this->UpdateICDMode(); |
| // Update the poll interval also to comply with LIT requirements |
| UpdateOperationState(OperationalState::ActiveMode); |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_DSLS |
| |
| void ICDManager::OnNetworkActivity() |
| { |
| this->UpdateOperationState(OperationalState::ActiveMode); |
| } |
| |
| void ICDManager::OnICDManagementServerEvent(ICDManagementEvents event) |
| { |
| switch (event) |
| { |
| case ICDManagementEvents::kTableUpdated: |
| this->UpdateICDMode(); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void ICDManager::OnSubscriptionReport() |
| { |
| // If the device is already in ActiveMode, that means that all active subscriptions have already been marked dirty. |
| // Since we only mark them dirty when we enter ActiveMode, it is not necessary to update the operational state a second time. |
| // Doing so will only add an ActiveModeThreshold to the active time which we don't want to do here. |
| VerifyOrReturn(mOperationalState == OperationalState::IdleMode); |
| this->UpdateOperationState(OperationalState::ActiveMode); |
| } |
| |
| void ICDManager::ExtendActiveMode(Milliseconds16 extendDuration) |
| { |
| DeviceLayer::SystemLayer().ExtendTimerTo(extendDuration, OnActiveModeDone, this); |
| |
| Milliseconds32 activeModeJitterThreshold = Milliseconds32(ICD_ACTIVE_TIME_JITTER_MS); |
| activeModeJitterThreshold = (extendDuration >= activeModeJitterThreshold) ? extendDuration - activeModeJitterThreshold : kZero; |
| |
| if (!mTransitionToIdleCalled) |
| { |
| DeviceLayer::SystemLayer().ExtendTimerTo(activeModeJitterThreshold, OnTransitionToIdle, this); |
| } |
| } |
| |
| CHIP_ERROR ICDManager::HandleEventTrigger(uint64_t eventTrigger) |
| { |
| ICDTestEventTriggerEvent trigger = static_cast<ICDTestEventTriggerEvent>(eventTrigger); |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| switch (trigger) |
| { |
| case ICDTestEventTriggerEvent::kAddActiveModeReq: |
| SetKeepActiveModeRequirements(KeepActiveFlag::kTestEventTriggerActiveMode, true); |
| break; |
| case ICDTestEventTriggerEvent::kRemoveActiveModeReq: |
| SetKeepActiveModeRequirements(KeepActiveFlag::kTestEventTriggerActiveMode, false); |
| break; |
| #if CHIP_CONFIG_ENABLE_ICD_CIP |
| case ICDTestEventTriggerEvent::kInvalidateHalfCounterValues: |
| err = ICDConfigurationData::GetInstance().GetICDCounter().InvalidateHalfCheckInCounterValues(); |
| break; |
| case ICDTestEventTriggerEvent::kInvalidateAllCounterValues: |
| err = ICDConfigurationData::GetInstance().GetICDCounter().InvalidateAllCheckInCounterValues(); |
| break; |
| case ICDTestEventTriggerEvent::kForceMaximumCheckInBackOffState: |
| err = mICDCheckInBackOffStrategy->ForceMaximumCheckInBackoff(); |
| break; |
| #endif // CHIP_CONFIG_ENABLE_ICD_CIP |
| #if CHIP_CONFIG_ENABLE_ICD_DSLS |
| case ICDTestEventTriggerEvent::kDSLSForceSitMode: |
| OnSITModeRequest(); |
| break; |
| case ICDTestEventTriggerEvent::kDSLSWithdrawSitMode: |
| OnSITModeRequestWithdrawal(); |
| break; |
| #endif // CHIP_CONFIG_ENABLE_ICD_DSLS |
| default: |
| err = CHIP_ERROR_INVALID_ARGUMENT; |
| break; |
| } |
| |
| return err; |
| } |
| |
| ICDManager::ObserverPointer * ICDManager::RegisterObserver(ICDStateObserver * observer) |
| { |
| return mStateObserverPool.CreateObject(observer); |
| } |
| |
| void ICDManager::ReleaseObserver(ICDStateObserver * observer) |
| { |
| mStateObserverPool.ForEachActiveObject([this, observer](ObserverPointer * obs) { |
| if (obs->mObserver == observer) |
| { |
| mStateObserverPool.ReleaseObject(obs); |
| return Loop::Break; |
| } |
| return Loop::Continue; |
| }); |
| } |
| |
| void ICDManager::postObserverEvent(ObserverEventType event) |
| { |
| mStateObserverPool.ForEachActiveObject([event](ObserverPointer * obs) { |
| switch (event) |
| { |
| case ObserverEventType::EnterActiveMode: { |
| obs->mObserver->OnEnterActiveMode(); |
| return Loop::Continue; |
| } |
| case ObserverEventType::EnterIdleMode: { |
| obs->mObserver->OnEnterIdleMode(); |
| return Loop::Continue; |
| } |
| case ObserverEventType::TransitionToIdle: { |
| obs->mObserver->OnTransitionToIdle(); |
| return Loop::Continue; |
| } |
| case ObserverEventType::ICDModeChange: { |
| obs->mObserver->OnICDModeChange(); |
| return Loop::Continue; |
| } |
| default: { |
| ChipLogError(DeviceLayer, "Invalid ICD Observer event type"); |
| return Loop::Break; |
| } |
| } |
| }); |
| } |
| |
| } // namespace app |
| } // namespace chip |
