| /* |
| * |
| * Copyright (c) 2020-2022 Project CHIP Authors |
| * Copyright (c) 2019 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #include <platform/CommissionableDataProvider.h> |
| #include <platform/ConnectivityManager.h> |
| #include <platform/DiagnosticDataProvider.h> |
| #include <platform/Linux/ConnectivityUtils.h> |
| #include <platform/Linux/DiagnosticDataProviderImpl.h> |
| #include <platform/Linux/NetworkCommissioningDriver.h> |
| #include <platform/Linux/WirelessDefs.h> |
| #include <platform/internal/BLEManager.h> |
| |
| #include <cstdlib> |
| #include <new> |
| #include <string> |
| #include <utility> |
| #include <vector> |
| |
| #include <ifaddrs.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/types.h> |
| |
| #include <lib/support/CHIPMemString.h> |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| |
| #include <platform/internal/GenericConnectivityManagerImpl_UDP.ipp> |
| |
| #if INET_CONFIG_ENABLE_TCP_ENDPOINT |
| #include <platform/internal/GenericConnectivityManagerImpl_TCP.ipp> |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| #include <platform/internal/GenericConnectivityManagerImpl_BLE.ipp> |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| #include <platform/internal/GenericConnectivityManagerImpl_Thread.ipp> |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA |
| #include <platform/Linux/GlibTypeDeleter.h> |
| #include <platform/internal/GenericConnectivityManagerImpl_WiFi.ipp> |
| #endif |
| |
| #ifndef CHIP_DEVICE_CONFIG_LINUX_DHCPC_CMD |
| #define CHIP_DEVICE_CONFIG_LINUX_DHCPC_CMD "dhclient -nw %s" |
| #endif |
| |
| using namespace ::chip; |
| using namespace ::chip::TLV; |
| using namespace ::chip::DeviceLayer; |
| using namespace ::chip::DeviceLayer::Internal; |
| using namespace ::chip::app::Clusters::GeneralDiagnostics; |
| using namespace ::chip::app::Clusters::WiFiNetworkDiagnostics; |
| |
| using namespace ::chip::DeviceLayer::NetworkCommissioning; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| |
| ConnectivityManagerImpl ConnectivityManagerImpl::sInstance; |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| char ConnectivityManagerImpl::sWiFiIfName[]; |
| #endif |
| |
| WiFiDriver::ScanCallback * ConnectivityManagerImpl::mpScanCallback; |
| NetworkCommissioning::Internal::WirelessDriver::ConnectCallback * ConnectivityManagerImpl::mpConnectCallback; |
| uint8_t ConnectivityManagerImpl::sInterestedSSID[Internal::kMaxWiFiSSIDLength]; |
| uint8_t ConnectivityManagerImpl::sInterestedSSIDLen; |
| |
| CHIP_ERROR ConnectivityManagerImpl::_Init() |
| { |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA |
| mWiFiStationMode = kWiFiStationMode_Disabled; |
| mWiFiStationReconnectInterval = System::Clock::Milliseconds32(CHIP_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL); |
| #endif |
| mpConnectCallback = nullptr; |
| mpScanCallback = nullptr; |
| |
| if (ConnectivityUtils::GetEthInterfaceName(mEthIfName, IFNAMSIZ) == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(DeviceLayer, "Got Ethernet interface: %s", mEthIfName); |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "Failed to get Ethernet interface"); |
| mEthIfName[0] = '\0'; |
| } |
| |
| if (GetDiagnosticDataProvider().ResetEthNetworkDiagnosticsCounts() != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to reset Ethernet statistic counts"); |
| } |
| |
| // Initialize the generic base classes that require it. |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| GenericConnectivityManagerImpl_Thread<ConnectivityManagerImpl>::_Init(); |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| if (ConnectivityUtils::GetWiFiInterfaceName(sWiFiIfName, IFNAMSIZ) == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(DeviceLayer, "Got WiFi interface: %s", sWiFiIfName); |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "Failed to get WiFi interface"); |
| sWiFiIfName[0] = '\0'; |
| } |
| |
| if (GetDiagnosticDataProvider().ResetWiFiNetworkDiagnosticsCounts() != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to reset WiFi statistic counts"); |
| } |
| #endif |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void ConnectivityManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| // Forward the event to the generic base classes as needed. |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| GenericConnectivityManagerImpl_Thread<ConnectivityManagerImpl>::_OnPlatformEvent(event); |
| #endif |
| } |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA |
| bool ConnectivityManagerImpl::mAssociattionStarted = false; |
| BitFlags<Internal::GenericConnectivityManagerImpl_WiFi<ConnectivityManagerImpl>::ConnectivityFlags> |
| ConnectivityManagerImpl::mConnectivityFlag; |
| struct GDBusWpaSupplicant ConnectivityManagerImpl::mWpaSupplicant; |
| std::mutex ConnectivityManagerImpl::mWpaSupplicantMutex; |
| |
| ConnectivityManager::WiFiStationMode ConnectivityManagerImpl::_GetWiFiStationMode() |
| { |
| if (mWiFiStationMode != kWiFiStationMode_ApplicationControlled) |
| { |
| mWiFiStationMode = (mWpaSupplicant.iface != nullptr) ? kWiFiStationMode_Enabled : kWiFiStationMode_Disabled; |
| } |
| |
| return mWiFiStationMode; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::_SetWiFiStationMode(ConnectivityManager::WiFiStationMode val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(val != ConnectivityManager::kWiFiStationMode_NotSupported, err = CHIP_ERROR_INVALID_ARGUMENT); |
| |
| if (mWiFiStationMode != val) |
| { |
| ChipLogProgress(DeviceLayer, "WiFi station mode change: %s -> %s", WiFiStationModeToStr(mWiFiStationMode), |
| WiFiStationModeToStr(val)); |
| } |
| |
| mWiFiStationMode = val; |
| exit: |
| return err; |
| } |
| |
| System::Clock::Timeout ConnectivityManagerImpl::_GetWiFiStationReconnectInterval() |
| { |
| return mWiFiStationReconnectInterval; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::_SetWiFiStationReconnectInterval(System::Clock::Timeout val) |
| { |
| mWiFiStationReconnectInterval = val; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| bool ConnectivityManagerImpl::_IsWiFiStationEnabled() |
| { |
| return GetWiFiStationMode() == kWiFiStationMode_Enabled; |
| } |
| |
| bool ConnectivityManagerImpl::_IsWiFiStationConnected() |
| { |
| bool ret = false; |
| const gchar * state = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.state != GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: _IsWiFiStationConnected: interface not connected"); |
| return false; |
| } |
| |
| state = wpa_fi_w1_wpa_supplicant1_interface_get_state(mWpaSupplicant.iface); |
| if (g_strcmp0(state, "completed") == 0) |
| { |
| mConnectivityFlag.Set(ConnectivityFlags::kHaveIPv4InternetConnectivity) |
| .Set(ConnectivityFlags::kHaveIPv6InternetConnectivity); |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| bool ConnectivityManagerImpl::_IsWiFiStationApplicationControlled() |
| { |
| return mWiFiStationMode == ConnectivityManager::kWiFiStationMode_ApplicationControlled; |
| } |
| |
| bool ConnectivityManagerImpl::_IsWiFiStationProvisioned() |
| { |
| bool ret = false; |
| const gchar * bss = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.state != GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: _IsWiFiStationProvisioned: interface not connected"); |
| return false; |
| } |
| |
| bss = wpa_fi_w1_wpa_supplicant1_interface_get_current_bss(mWpaSupplicant.iface); |
| if (g_str_match_string("BSSs", bss, true)) |
| { |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| void ConnectivityManagerImpl::_ClearWiFiStationProvision() |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.state != GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: _ClearWiFiStationProvision: interface not connected"); |
| return; |
| } |
| |
| if (mWiFiStationMode != kWiFiStationMode_ApplicationControlled) |
| { |
| GError * err = nullptr; |
| wpa_fi_w1_wpa_supplicant1_interface_call_remove_all_networks_sync(mWpaSupplicant.iface, nullptr, &err); |
| |
| if (err != nullptr) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to remove all networks with error: %s", |
| err ? err->message : "unknown error"); |
| g_error_free(err); |
| } |
| } |
| } |
| |
| bool ConnectivityManagerImpl::_CanStartWiFiScan() |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| bool ret = mWpaSupplicant.state == GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED && |
| mWpaSupplicant.scanState == GDBusWpaSupplicant::WIFI_SCANNING_IDLE; |
| |
| return ret; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::_SetWiFiAPMode(WiFiAPMode val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(val != kWiFiAPMode_NotSupported, err = CHIP_ERROR_INVALID_ARGUMENT); |
| |
| if (mWiFiAPMode != val) |
| { |
| ChipLogProgress(DeviceLayer, "WiFi AP mode change: %s -> %s", WiFiAPModeToStr(mWiFiAPMode), WiFiAPModeToStr(val)); |
| mWiFiAPMode = val; |
| |
| DeviceLayer::SystemLayer().ScheduleWork(DriveAPState, nullptr); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| void ConnectivityManagerImpl::_DemandStartWiFiAP() |
| { |
| if (mWiFiAPMode == kWiFiAPMode_OnDemand || mWiFiAPMode == kWiFiAPMode_OnDemand_NoStationProvision) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: Demand start WiFi AP"); |
| mLastAPDemandTime = System::SystemClock().GetMonotonicTimestamp(); |
| DeviceLayer::SystemLayer().ScheduleWork(DriveAPState, nullptr); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: Demand start WiFi AP ignored, mode: %s", WiFiAPModeToStr(mWiFiAPMode)); |
| } |
| } |
| |
| void ConnectivityManagerImpl::_StopOnDemandWiFiAP() |
| { |
| if (mWiFiAPMode == kWiFiAPMode_OnDemand || mWiFiAPMode == kWiFiAPMode_OnDemand_NoStationProvision) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: Demand stop WiFi AP"); |
| mLastAPDemandTime = System::Clock::kZero; |
| DeviceLayer::SystemLayer().ScheduleWork(DriveAPState, nullptr); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: Demand stop WiFi AP ignored, mode: %s", WiFiAPModeToStr(mWiFiAPMode)); |
| } |
| } |
| |
| void ConnectivityManagerImpl::_MaintainOnDemandWiFiAP() |
| { |
| if (mWiFiAPMode == kWiFiAPMode_OnDemand || mWiFiAPMode == kWiFiAPMode_OnDemand_NoStationProvision) |
| { |
| if (mWiFiAPState == kWiFiAPState_Active) |
| { |
| mLastAPDemandTime = System::SystemClock().GetMonotonicTimestamp(); |
| } |
| } |
| } |
| |
| void ConnectivityManagerImpl::_SetWiFiAPIdleTimeout(System::Clock::Timeout val) |
| { |
| mWiFiAPIdleTimeout = val; |
| DeviceLayer::SystemLayer().ScheduleWork(DriveAPState, nullptr); |
| } |
| |
| void ConnectivityManagerImpl::UpdateNetworkStatus() |
| { |
| Network configuredNetwork; |
| |
| VerifyOrReturn(IsWiFiStationEnabled() && mpStatusChangeCallback != nullptr); |
| |
| CHIP_ERROR err = GetConfiguredNetwork(configuredNetwork); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to get configured network when updating network status: %s", err.AsString()); |
| return; |
| } |
| |
| // If we have already connected to the WiFi AP, then return null to indicate a success state. |
| if (IsWiFiStationConnected()) |
| { |
| mpStatusChangeCallback->OnNetworkingStatusChange( |
| Status::kSuccess, MakeOptional(ByteSpan(configuredNetwork.networkID, configuredNetwork.networkIDLen)), NullOptional); |
| return; |
| } |
| |
| mpStatusChangeCallback->OnNetworkingStatusChange( |
| Status::kUnknownError, MakeOptional(ByteSpan(configuredNetwork.networkID, configuredNetwork.networkIDLen)), |
| MakeOptional(GetDisconnectReason())); |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaPropertiesChanged(WpaFiW1Wpa_supplicant1Interface * proxy, GVariant * changed_properties, |
| const gchar * const * invalidated_properties, gpointer user_data) |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (g_variant_n_children(changed_properties) > 0) |
| { |
| GVariantIter * iter; |
| const gchar * key; |
| GVariant * value; |
| |
| WiFiDiagnosticsDelegate * delegate = GetDiagnosticDataProvider().GetWiFiDiagnosticsDelegate(); |
| |
| g_variant_get(changed_properties, "a{sv}", &iter); |
| |
| while (g_variant_iter_loop(iter, "{&sv}", &key, &value)) |
| { |
| gchar * value_str; |
| value_str = g_variant_print(value, TRUE); |
| ChipLogProgress(DeviceLayer, "wpa_supplicant:PropertiesChanged:key:%s -> %s", StringOrNullMarker(key), |
| StringOrNullMarker(value_str)); |
| |
| if (g_strcmp0(key, "State") == 0) |
| { |
| if (g_strcmp0(value_str, "\'associating\'") == 0) |
| { |
| mAssociattionStarted = true; |
| } |
| else if (g_strcmp0(value_str, "\'disconnected\'") == 0) |
| { |
| gint reason = wpa_fi_w1_wpa_supplicant1_interface_get_disconnect_reason(mWpaSupplicant.iface); |
| |
| if (delegate) |
| { |
| delegate->OnDisconnectionDetected(reason); |
| delegate->OnConnectionStatusChanged(static_cast<uint8_t>(WiFiConnectionStatus::kConnected)); |
| } |
| |
| if (mAssociattionStarted) |
| { |
| uint8_t associationFailureCause = static_cast<uint8_t>(AssociationFailureCause::kUnknown); |
| uint16_t status = WLAN_STATUS_UNSPECIFIED_FAILURE; |
| |
| switch (abs(reason)) |
| { |
| case WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY: |
| case WLAN_REASON_DISASSOC_AP_BUSY: |
| case WLAN_REASON_DISASSOC_STA_HAS_LEFT: |
| case WLAN_REASON_DISASSOC_LOW_ACK: |
| case WLAN_REASON_BSS_TRANSITION_DISASSOC: |
| associationFailureCause = static_cast<uint8_t>(AssociationFailureCause::kAssociationFailed); |
| status = wpa_fi_w1_wpa_supplicant1_interface_get_assoc_status_code(mWpaSupplicant.iface); |
| break; |
| case WLAN_REASON_PREV_AUTH_NOT_VALID: |
| case WLAN_REASON_DEAUTH_LEAVING: |
| case WLAN_REASON_IEEE_802_1X_AUTH_FAILED: |
| associationFailureCause = static_cast<uint8_t>(AssociationFailureCause::kAuthenticationFailed); |
| status = wpa_fi_w1_wpa_supplicant1_interface_get_auth_status_code(mWpaSupplicant.iface); |
| break; |
| default: |
| break; |
| } |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([reason]() { |
| if (mpConnectCallback != nullptr) |
| { |
| mpConnectCallback->OnResult(NetworkCommissioning::Status::kUnknownError, CharSpan(), reason); |
| mpConnectCallback = nullptr; |
| } |
| }); |
| |
| delegate->OnAssociationFailureDetected(associationFailureCause, status); |
| } |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([]() { ConnectivityMgrImpl().UpdateNetworkStatus(); }); |
| |
| mAssociattionStarted = false; |
| } |
| else if (g_strcmp0(value_str, "\'associated\'") == 0) |
| { |
| if (delegate) |
| { |
| delegate->OnConnectionStatusChanged(static_cast<uint8_t>(WiFiConnectionStatus::kNotConnected)); |
| } |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([]() { ConnectivityMgrImpl().UpdateNetworkStatus(); }); |
| } |
| else if (g_strcmp0(value_str, "\'completed\'") == 0) |
| { |
| if (mAssociattionStarted) |
| { |
| DeviceLayer::SystemLayer().ScheduleLambda([]() { |
| if (mpConnectCallback != nullptr) |
| { |
| mpConnectCallback->OnResult(NetworkCommissioning::Status::kSuccess, CharSpan(), 0); |
| mpConnectCallback = nullptr; |
| } |
| ConnectivityMgrImpl().PostNetworkConnect(); |
| }); |
| } |
| mAssociattionStarted = false; |
| } |
| } |
| |
| g_free(value_str); |
| } |
| |
| g_variant_iter_free(iter); |
| } |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaInterfaceProxyReady(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| GError * err = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| WpaFiW1Wpa_supplicant1Interface * iface = wpa_fi_w1_wpa_supplicant1_interface_proxy_new_for_bus_finish(res, &err); |
| |
| if (mWpaSupplicant.iface) |
| { |
| g_object_unref(mWpaSupplicant.iface); |
| mWpaSupplicant.iface = nullptr; |
| } |
| |
| if (iface != nullptr && err == nullptr) |
| { |
| mWpaSupplicant.iface = iface; |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: connected to wpa_supplicant interface proxy"); |
| |
| g_signal_connect(mWpaSupplicant.iface, "properties-changed", G_CALLBACK(_OnWpaPropertiesChanged), NULL); |
| g_signal_connect(mWpaSupplicant.iface, "scan-done", G_CALLBACK(_OnWpaInterfaceScanDone), NULL); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to create wpa_supplicant interface proxy %s: %s", |
| mWpaSupplicant.interfacePath, err ? err->message : "unknown error"); |
| |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_NOT_CONNECTED; |
| } |
| |
| // We need to stop auto scan or it will block our network scan. |
| DeviceLayer::SystemLayer().ScheduleLambda([]() { |
| CHIP_ERROR errInner = StopAutoScan(); |
| if (errInner != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "wpa_supplicant: Failed to stop auto scan: %s", ErrorStr(errInner)); |
| } |
| }); |
| |
| if (err != nullptr) |
| g_error_free(err); |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaBssProxyReady(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| GError * err = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| WpaFiW1Wpa_supplicant1BSS * bss = wpa_fi_w1_wpa_supplicant1_bss_proxy_new_for_bus_finish(res, &err); |
| |
| if (mWpaSupplicant.bss) |
| { |
| g_object_unref(mWpaSupplicant.bss); |
| mWpaSupplicant.bss = nullptr; |
| } |
| |
| if (bss != nullptr && err == nullptr) |
| { |
| mWpaSupplicant.bss = bss; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: connected to wpa_supplicant bss proxy"); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to create wpa_supplicant bss proxy %s: %s", |
| mWpaSupplicant.interfacePath, err ? err->message : "unknown error"); |
| } |
| |
| if (err != nullptr) |
| g_error_free(err); |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaInterfaceReady(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| GError * err = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| gboolean result = |
| wpa_fi_w1_wpa_supplicant1_call_get_interface_finish(mWpaSupplicant.proxy, &mWpaSupplicant.interfacePath, res, &err); |
| if (result) |
| { |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_GOT_INTERFACE_PATH; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: WiFi interface: %s", mWpaSupplicant.interfacePath); |
| |
| wpa_fi_w1_wpa_supplicant1_interface_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| mWpaSupplicant.interfacePath, nullptr, _OnWpaInterfaceProxyReady, |
| nullptr); |
| |
| wpa_fi_w1_wpa_supplicant1_bss_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| mWpaSupplicant.interfacePath, nullptr, _OnWpaBssProxyReady, nullptr); |
| } |
| else |
| { |
| GError * error = nullptr; |
| GVariant * args = nullptr; |
| GVariantBuilder builder; |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: can't find interface %s: %s", sWiFiIfName, |
| err ? err->message : "unknown error"); |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: try to create interface %s", CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME); |
| |
| g_variant_builder_init(&builder, G_VARIANT_TYPE_VARDICT); |
| g_variant_builder_add(&builder, "{sv}", "Ifname", g_variant_new_string(CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME)); |
| args = g_variant_builder_end(&builder); |
| |
| result = wpa_fi_w1_wpa_supplicant1_call_create_interface_sync(mWpaSupplicant.proxy, args, &mWpaSupplicant.interfacePath, |
| nullptr, &error); |
| |
| if (result) |
| { |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_GOT_INTERFACE_PATH; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: WiFi interface: %s", mWpaSupplicant.interfacePath); |
| |
| Platform::CopyString(sWiFiIfName, CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME); |
| |
| wpa_fi_w1_wpa_supplicant1_interface_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, |
| kWpaSupplicantServiceName, mWpaSupplicant.interfacePath, nullptr, |
| _OnWpaInterfaceProxyReady, nullptr); |
| |
| wpa_fi_w1_wpa_supplicant1_bss_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| mWpaSupplicant.interfacePath, nullptr, _OnWpaBssProxyReady, nullptr); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to create interface %s: %s", |
| CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME, error ? error->message : "unknown error"); |
| |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_NO_INTERFACE_PATH; |
| |
| if (mWpaSupplicant.interfacePath) |
| { |
| g_free(mWpaSupplicant.interfacePath); |
| mWpaSupplicant.interfacePath = nullptr; |
| } |
| } |
| |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| if (err != nullptr) |
| g_error_free(err); |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaInterfaceAdded(WpaFiW1Wpa_supplicant1 * proxy, const gchar * path, GVariant * properties, |
| gpointer user_data) |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.interfacePath) |
| { |
| return; |
| } |
| |
| mWpaSupplicant.interfacePath = const_cast<gchar *>(path); |
| if (mWpaSupplicant.interfacePath) |
| { |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_GOT_INTERFACE_PATH; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: WiFi interface added: %s", mWpaSupplicant.interfacePath); |
| |
| wpa_fi_w1_wpa_supplicant1_interface_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| mWpaSupplicant.interfacePath, nullptr, _OnWpaInterfaceProxyReady, |
| nullptr); |
| |
| wpa_fi_w1_wpa_supplicant1_bss_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| mWpaSupplicant.interfacePath, nullptr, _OnWpaBssProxyReady, nullptr); |
| } |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaInterfaceRemoved(WpaFiW1Wpa_supplicant1 * proxy, const gchar * path, GVariant * properties, |
| gpointer user_data) |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.interfacePath == nullptr) |
| { |
| return; |
| } |
| |
| if (g_strcmp0(mWpaSupplicant.interfacePath, path) == 0) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: WiFi interface removed: %s", StringOrNullMarker(path)); |
| |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_NO_INTERFACE_PATH; |
| |
| if (mWpaSupplicant.interfacePath) |
| { |
| g_free(mWpaSupplicant.interfacePath); |
| mWpaSupplicant.interfacePath = nullptr; |
| } |
| |
| if (mWpaSupplicant.iface) |
| { |
| g_object_unref(mWpaSupplicant.iface); |
| mWpaSupplicant.iface = nullptr; |
| } |
| |
| if (mWpaSupplicant.bss) |
| { |
| g_object_unref(mWpaSupplicant.bss); |
| mWpaSupplicant.bss = nullptr; |
| } |
| |
| mWpaSupplicant.scanState = GDBusWpaSupplicant::WIFI_SCANNING_IDLE; |
| } |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaProxyReady(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| GError * err = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| mWpaSupplicant.proxy = wpa_fi_w1_wpa_supplicant1_proxy_new_for_bus_finish(res, &err); |
| if (mWpaSupplicant.proxy != nullptr && err == nullptr) |
| { |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_CONNECTED; |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: connected to wpa_supplicant proxy"); |
| |
| g_signal_connect(mWpaSupplicant.proxy, "interface-added", G_CALLBACK(_OnWpaInterfaceAdded), NULL); |
| |
| g_signal_connect(mWpaSupplicant.proxy, "interface-removed", G_CALLBACK(_OnWpaInterfaceRemoved), NULL); |
| |
| wpa_fi_w1_wpa_supplicant1_call_get_interface(mWpaSupplicant.proxy, sWiFiIfName, nullptr, _OnWpaInterfaceReady, nullptr); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to create wpa_supplicant proxy %s", |
| err ? err->message : "unknown error"); |
| mWpaSupplicant.state = GDBusWpaSupplicant::WPA_NOT_CONNECTED; |
| } |
| |
| if (err != nullptr) |
| g_error_free(err); |
| } |
| |
| void ConnectivityManagerImpl::StartWiFiManagement() |
| { |
| mConnectivityFlag.ClearAll(); |
| mWpaSupplicant.state = GDBusWpaSupplicant::INIT; |
| mWpaSupplicant.scanState = GDBusWpaSupplicant::WIFI_SCANNING_IDLE; |
| mWpaSupplicant.proxy = nullptr; |
| mWpaSupplicant.iface = nullptr; |
| mWpaSupplicant.bss = nullptr; |
| mWpaSupplicant.interfacePath = nullptr; |
| mWpaSupplicant.networkPath = nullptr; |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: Start WiFi management"); |
| |
| wpa_fi_w1_wpa_supplicant1_proxy_new_for_bus(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| kWpaSupplicantObjectPath, nullptr, _OnWpaProxyReady, nullptr); |
| } |
| |
| bool ConnectivityManagerImpl::IsWiFiManagementStarted() |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| bool ret = mWpaSupplicant.state == GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED; |
| |
| return ret; |
| } |
| |
| void ConnectivityManagerImpl::DriveAPState() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| WiFiAPState targetState; |
| |
| // If the AP interface is not under application control... |
| if (mWiFiAPMode != kWiFiAPMode_ApplicationControlled) |
| { |
| // Determine the target (desired) state for AP interface... |
| |
| // The target state is 'NotActive' if the application has expressly disabled the AP interface. |
| if (mWiFiAPMode == kWiFiAPMode_Disabled) |
| { |
| targetState = kWiFiAPState_NotActive; |
| } |
| |
| // The target state is 'Active' if the application has expressly enabled the AP interface. |
| else if (mWiFiAPMode == kWiFiAPMode_Enabled) |
| { |
| targetState = kWiFiAPState_Active; |
| } |
| |
| // The target state is 'Active' if the AP mode is 'On demand, when no station is available' |
| // and the station interface is not provisioned or the application has disabled the station |
| // interface. |
| else if (mWiFiAPMode == kWiFiAPMode_OnDemand_NoStationProvision && |
| (!IsWiFiStationProvisioned() || GetWiFiStationMode() == kWiFiStationMode_Disabled)) |
| { |
| targetState = kWiFiAPState_Active; |
| } |
| |
| // The target state is 'Active' if the AP mode is one of the 'On demand' modes and there |
| // has been demand for the AP within the idle timeout period. |
| else if (mWiFiAPMode == kWiFiAPMode_OnDemand || mWiFiAPMode == kWiFiAPMode_OnDemand_NoStationProvision) |
| { |
| System::Clock::Timestamp now = System::SystemClock().GetMonotonicTimestamp(); |
| |
| if (mLastAPDemandTime != System::Clock::kZero && now < (mLastAPDemandTime + mWiFiAPIdleTimeout)) |
| { |
| targetState = kWiFiAPState_Active; |
| |
| // Compute the amount of idle time before the AP should be deactivated and |
| // arm a timer to fire at that time. |
| System::Clock::Timeout apTimeout = (mLastAPDemandTime + mWiFiAPIdleTimeout) - now; |
| err = DeviceLayer::SystemLayer().StartTimer(apTimeout, DriveAPState, nullptr); |
| SuccessOrExit(err); |
| ChipLogProgress(DeviceLayer, "Next WiFi AP timeout in %" PRIu32 " s", |
| std::chrono::duration_cast<System::Clock::Seconds32>(apTimeout).count()); |
| } |
| else |
| { |
| targetState = kWiFiAPState_NotActive; |
| } |
| } |
| |
| // Otherwise the target state is 'NotActive'. |
| else |
| { |
| targetState = kWiFiAPState_NotActive; |
| } |
| |
| // If the current AP state does not match the target state... |
| if (mWiFiAPState != targetState) |
| { |
| if (targetState == kWiFiAPState_Active) |
| { |
| err = ConfigureWiFiAP(); |
| SuccessOrExit(err); |
| |
| ChangeWiFiAPState(kWiFiAPState_Active); |
| } |
| else |
| { |
| if (mWpaSupplicant.networkPath) |
| { |
| GError * error = nullptr; |
| |
| gboolean result = wpa_fi_w1_wpa_supplicant1_interface_call_remove_network_sync( |
| mWpaSupplicant.iface, mWpaSupplicant.networkPath, nullptr, &error); |
| |
| if (result) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: removed network: %s", mWpaSupplicant.networkPath); |
| g_free(mWpaSupplicant.networkPath); |
| mWpaSupplicant.networkPath = nullptr; |
| ChangeWiFiAPState(kWiFiAPState_NotActive); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to stop AP mode with error: %s", |
| error ? error->message : "unknown error"); |
| err = CHIP_ERROR_INTERNAL; |
| } |
| |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| } |
| } |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| SetWiFiAPMode(kWiFiAPMode_Disabled); |
| ChipLogError(DeviceLayer, "Drive AP state failed: %s", ErrorStr(err)); |
| } |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::ConfigureWiFiAP() |
| { |
| CHIP_ERROR ret = CHIP_NO_ERROR; |
| GError * err = nullptr; |
| GVariant * args = nullptr; |
| GVariantBuilder builder; |
| |
| uint16_t channel = 1; |
| uint16_t discriminator = 0; |
| char ssid[32]; |
| |
| channel = ConnectivityUtils::MapChannelToFrequency(kWiFi_BAND_2_4_GHZ, CHIP_DEVICE_CONFIG_WIFI_AP_CHANNEL); |
| |
| if (GetCommissionableDataProvider()->GetSetupDiscriminator(discriminator) != CHIP_NO_ERROR) |
| discriminator = 0; |
| |
| snprintf(ssid, 32, "%s%04u", CHIP_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX, discriminator); |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: ConfigureWiFiAP, ssid: %s, channel: %d", ssid, channel); |
| |
| // Clean up current network if exists |
| if (mWpaSupplicant.networkPath) |
| { |
| g_object_unref(mWpaSupplicant.networkPath); |
| mWpaSupplicant.networkPath = nullptr; |
| } |
| |
| g_variant_builder_init(&builder, G_VARIANT_TYPE_VARDICT); |
| g_variant_builder_add(&builder, "{sv}", "ssid", g_variant_new_string(ssid)); |
| g_variant_builder_add(&builder, "{sv}", "key_mgmt", g_variant_new_string("NONE")); |
| g_variant_builder_add(&builder, "{sv}", "mode", g_variant_new_int32(2)); |
| g_variant_builder_add(&builder, "{sv}", "frequency", g_variant_new_int32(channel)); |
| args = g_variant_builder_end(&builder); |
| |
| gboolean result = wpa_fi_w1_wpa_supplicant1_interface_call_add_network_sync(mWpaSupplicant.iface, args, |
| &mWpaSupplicant.networkPath, nullptr, &err); |
| |
| if (result) |
| { |
| GError * error = nullptr; |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: added network: SSID: %s: %s", ssid, mWpaSupplicant.networkPath); |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_select_network_sync(mWpaSupplicant.iface, mWpaSupplicant.networkPath, |
| nullptr, &error); |
| if (result) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: succeeded to start softAP: SSID: %s", ssid); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to start softAP: SSID: %s: %s", ssid, |
| error ? error->message : "unknown error"); |
| |
| ret = CHIP_ERROR_INTERNAL; |
| } |
| |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to add network: %s: %s", ssid, err ? err->message : "unknown error"); |
| |
| if (mWpaSupplicant.networkPath) |
| { |
| g_object_unref(mWpaSupplicant.networkPath); |
| mWpaSupplicant.networkPath = nullptr; |
| } |
| |
| ret = CHIP_ERROR_INTERNAL; |
| } |
| |
| if (err != nullptr) |
| g_error_free(err); |
| |
| return ret; |
| } |
| |
| void ConnectivityManagerImpl::ChangeWiFiAPState(WiFiAPState newState) |
| { |
| if (mWiFiAPState != newState) |
| { |
| ChipLogProgress(DeviceLayer, "WiFi AP state change: %s -> %s", WiFiAPStateToStr(mWiFiAPState), WiFiAPStateToStr(newState)); |
| mWiFiAPState = newState; |
| } |
| } |
| |
| void ConnectivityManagerImpl::DriveAPState(::chip::System::Layer * aLayer, void * aAppState) |
| { |
| sInstance.DriveAPState(); |
| } |
| |
| CHIP_ERROR |
| ConnectivityManagerImpl::ConnectWiFiNetworkAsync(ByteSpan ssid, ByteSpan credentials, |
| NetworkCommissioning::Internal::WirelessDriver::ConnectCallback * apCallback) |
| { |
| CHIP_ERROR ret = CHIP_NO_ERROR; |
| GError * err = nullptr; |
| GVariant * args = nullptr; |
| GVariantBuilder builder; |
| gboolean result; |
| char ssidStr[kMaxWiFiSSIDLength + 1u] = { 0 }; |
| char keyStr[kMaxWiFiKeyLength + 1u] = { 0 }; |
| |
| VerifyOrReturnError(ssid.size() <= kMaxWiFiSSIDLength, CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrReturnError(credentials.size() <= kMaxWiFiKeyLength, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| // There is another ongoing connect request, reject the new one. |
| VerifyOrReturnError(mpConnectCallback == nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| const gchar * networkPath = wpa_fi_w1_wpa_supplicant1_interface_get_current_network(mWpaSupplicant.iface); |
| |
| // wpa_supplicant DBus API: if network path of current network is not "/", means we have already selected some network. |
| if (strcmp(networkPath, "/") != 0) |
| { |
| GError * error = nullptr; |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_remove_network_sync(mWpaSupplicant.iface, networkPath, nullptr, &error); |
| |
| if (result) |
| { |
| if (mWpaSupplicant.networkPath != nullptr) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: removed network: %s", mWpaSupplicant.networkPath); |
| g_free(mWpaSupplicant.networkPath); |
| mWpaSupplicant.networkPath = nullptr; |
| } |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to stop AP mode with error: %s", |
| error ? error->message : "unknown error"); |
| ret = CHIP_ERROR_INTERNAL; |
| } |
| |
| if (error != nullptr) |
| g_error_free(error); |
| |
| SuccessOrExit(ret); |
| } |
| |
| g_variant_builder_init(&builder, G_VARIANT_TYPE_VARDICT); |
| memcpy(ssidStr, ssid.data(), ssid.size()); |
| memcpy(keyStr, credentials.data(), credentials.size()); |
| g_variant_builder_add(&builder, "{sv}", "ssid", g_variant_new_string(ssidStr)); |
| g_variant_builder_add(&builder, "{sv}", "psk", g_variant_new_string(keyStr)); |
| g_variant_builder_add(&builder, "{sv}", "key_mgmt", g_variant_new_string("WPA-PSK")); |
| args = g_variant_builder_end(&builder); |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_add_network_sync(mWpaSupplicant.iface, args, &mWpaSupplicant.networkPath, |
| nullptr, &err); |
| |
| if (result) |
| { |
| // Note: wpa_supplicant will return immediately if the network is already connected, but it will still try reconnect in the |
| // background. The client still need to wait for a few seconds for this reconnect operation. So we always disconnect from |
| // the network we are connected and ignore any errors. |
| wpa_fi_w1_wpa_supplicant1_interface_call_disconnect_sync(mWpaSupplicant.iface, nullptr, nullptr); |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: added network: %s", mWpaSupplicant.networkPath); |
| |
| wpa_fi_w1_wpa_supplicant1_interface_call_select_network(mWpaSupplicant.iface, mWpaSupplicant.networkPath, nullptr, |
| _ConnectWiFiNetworkAsyncCallback, this); |
| mpConnectCallback = apCallback; |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to add network: %s", err ? err->message : "unknown error"); |
| |
| if (mWpaSupplicant.networkPath) |
| { |
| g_object_unref(mWpaSupplicant.networkPath); |
| mWpaSupplicant.networkPath = nullptr; |
| } |
| |
| ret = CHIP_ERROR_INTERNAL; |
| } |
| |
| exit: |
| if (err != nullptr) |
| g_error_free(err); |
| |
| return ret; |
| } |
| |
| void ConnectivityManagerImpl::_ConnectWiFiNetworkAsyncCallback(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| ConnectivityManagerImpl * this_ = reinterpret_cast<ConnectivityManagerImpl *>(user_data); |
| std::unique_ptr<GVariant, GVariantDeleter> attachRes; |
| std::unique_ptr<GError, GErrorDeleter> err; |
| { |
| gboolean result = wpa_fi_w1_wpa_supplicant1_interface_call_select_network_finish(mWpaSupplicant.iface, res, |
| &MakeUniquePointerReceiver(err).Get()); |
| if (!result) |
| { |
| ChipLogError(DeviceLayer, "Failed to perform connect network: %s", err == nullptr ? "unknown error" : err->message); |
| DeviceLayer::SystemLayer().ScheduleLambda([this_]() { |
| if (mpConnectCallback != nullptr) |
| { |
| // TODO(#14175): Replace this with actual thread attach result. |
| this_->mpConnectCallback->OnResult(NetworkCommissioning::Status::kUnknownError, CharSpan(), 0); |
| this_->mpConnectCallback = nullptr; |
| } |
| mpConnectCallback = nullptr; |
| }); |
| |
| return; |
| } |
| |
| GError * gerror = nullptr; |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_save_config_sync(mWpaSupplicant.iface, nullptr, &gerror); |
| if (result) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: save config succeeded!"); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to save config: %s", gerror ? gerror->message : "unknown error"); |
| } |
| |
| if (gerror != nullptr) |
| g_error_free(gerror); |
| } |
| } |
| |
| void ConnectivityManagerImpl::PostNetworkConnect() |
| { |
| // Iterate on the network interface to see if we already have beed assigned addresses. |
| // The temporary hack for getting IP address change on linux for network provisioning in the rendezvous session. |
| // This should be removed or find a better place once we depercate the rendezvous session. |
| for (chip::Inet::InterfaceAddressIterator it; it.HasCurrent(); it.Next()) |
| { |
| char ifName[chip::Inet::InterfaceId::kMaxIfNameLength]; |
| if (it.IsUp() && CHIP_NO_ERROR == it.GetInterfaceName(ifName, sizeof(ifName)) && |
| strncmp(ifName, sWiFiIfName, sizeof(ifName)) == 0) |
| { |
| chip::Inet::IPAddress addr; |
| if ((it.GetAddress(addr) == CHIP_NO_ERROR) && addr.IsIPv4()) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kInternetConnectivityChange; |
| event.InternetConnectivityChange.IPv4 = kConnectivity_Established; |
| event.InternetConnectivityChange.IPv6 = kConnectivity_NoChange; |
| event.InternetConnectivityChange.ipAddress = addr; |
| |
| char ipStrBuf[chip::Inet::IPAddress::kMaxStringLength] = { 0 }; |
| addr.ToString(ipStrBuf); |
| |
| ChipLogDetail(DeviceLayer, "Got IP address on interface: %s IP: %s", ifName, ipStrBuf); |
| |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| } |
| } |
| |
| // Run dhclient for IP on WiFi. |
| // TODO: The wifi can be managed by networkmanager on linux so we don't have to care about this. |
| char cmdBuffer[128]; |
| sprintf(cmdBuffer, CHIP_DEVICE_CONFIG_LINUX_DHCPC_CMD, sWiFiIfName); |
| int dhclientSystemRet = system(cmdBuffer); |
| if (dhclientSystemRet != 0) |
| { |
| ChipLogError(DeviceLayer, "Failed to run dhclient, system() returns %d", dhclientSystemRet); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "dhclient is running on the %s interface.", sWiFiIfName); |
| } |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::CommitConfig() |
| { |
| gboolean result; |
| std::unique_ptr<GError, GErrorDeleter> err; |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: connected to network"); |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_save_config_sync(mWpaSupplicant.iface, nullptr, |
| &MakeUniquePointerReceiver(err).Get()); |
| |
| if (!result) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to save config: %s", err ? err->message : "unknown error"); |
| return CHIP_ERROR_INTERNAL; |
| } |
| |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: save config succeeded!"); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::GetWiFiBssId(ByteSpan & value) |
| { |
| CHIP_ERROR err = CHIP_ERROR_READ_FAILED; |
| struct ifaddrs * ifaddr = nullptr; |
| |
| // On Linux simulation, we don't have the DBus API to get the BSSID of connected AP. Use mac address |
| // of local WiFi network card instead. |
| if (getifaddrs(&ifaddr) == -1) |
| { |
| ChipLogError(DeviceLayer, "Failed to get network interfaces"); |
| } |
| else |
| { |
| uint8_t macAddress[kMaxHardwareAddrSize]; |
| |
| // Walk through linked list, maintaining head pointer so we can free list later. |
| for (struct ifaddrs * ifa = ifaddr; ifa != nullptr; ifa = ifa->ifa_next) |
| { |
| if (ConnectivityUtils::GetInterfaceConnectionType(ifa->ifa_name) == |
| InterfaceTypeEnum::EMBER_ZCL_INTERFACE_TYPE_ENUM_WI_FI) |
| { |
| if (ConnectivityUtils::GetInterfaceHardwareAddrs(ifa->ifa_name, macAddress, kMaxHardwareAddrSize) != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to get WiFi network hardware address"); |
| } |
| else |
| { |
| // Set 48-bit IEEE MAC Address |
| value = ByteSpan(macAddress, 6); |
| err = CHIP_NO_ERROR; |
| break; |
| } |
| } |
| } |
| |
| freeifaddrs(ifaddr); |
| } |
| |
| return err; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::GetWiFiSecurityType(uint8_t & securityType) |
| { |
| const gchar * mode = nullptr; |
| |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| |
| if (mWpaSupplicant.state != GDBusWpaSupplicant::WPA_INTERFACE_CONNECTED) |
| { |
| ChipLogError(DeviceLayer, "wpa_supplicant: _GetWiFiSecurityType: interface proxy not connected"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| mode = wpa_fi_w1_wpa_supplicant1_interface_get_current_auth_mode(mWpaSupplicant.iface); |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: current Wi-Fi security type: %s", StringOrNullMarker(mode)); |
| |
| if (strncmp(mode, "WPA-PSK", 7) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_WPA; |
| } |
| else if (strncmp(mode, "WPA2-PSK", 8) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_WPA2; |
| } |
| else if (strncmp(mode, "WPA2-EAP", 8) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_WPA2; |
| } |
| else if (strncmp(mode, "WPA3-PSK", 8) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_WPA3; |
| } |
| else if (strncmp(mode, "WEP", 3) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_WEP; |
| } |
| else if (strncmp(mode, "NONE", 4) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_NONE; |
| } |
| else if (strncmp(mode, "WPA-NONE", 8) == 0) |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_NONE; |
| } |
| else |
| { |
| securityType = EMBER_ZCL_SECURITY_TYPE_UNSPECIFIED; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::GetWiFiVersion(uint8_t & wiFiVersion) |
| { |
| // We don't have driect API to get the WiFi version yet, retrun 802.11n on Linux simulation. |
| wiFiVersion = EMBER_ZCL_WI_FI_VERSION_TYPE_N; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| int32_t ConnectivityManagerImpl::GetDisconnectReason() |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| std::unique_ptr<GError, GErrorDeleter> err; |
| |
| gint errorValue = wpa_fi_w1_wpa_supplicant1_interface_get_disconnect_reason(mWpaSupplicant.iface); |
| // wpa_supplicant DBus API: DisconnectReason: The most recent IEEE 802.11 reason code for disconnect. Negative value |
| // indicates locally generated disconnection. |
| return errorValue; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::GetConfiguredNetwork(NetworkCommissioning::Network & network) |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| std::unique_ptr<GError, GErrorDeleter> err; |
| |
| if (mWpaSupplicant.iface == nullptr) |
| { |
| ChipLogDetail(DeviceLayer, "Wifi network not currently connected"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| const gchar * networkPath = wpa_fi_w1_wpa_supplicant1_interface_get_current_network(mWpaSupplicant.iface); |
| |
| // wpa_supplicant DBus API: if network path of current network is "/", means no networks is currently selected. |
| if (strcmp(networkPath, "/") == 0) |
| { |
| return CHIP_ERROR_KEY_NOT_FOUND; |
| } |
| |
| std::unique_ptr<WpaFiW1Wpa_supplicant1Network, GObjectDeleter> networkInfo( |
| wpa_fi_w1_wpa_supplicant1_network_proxy_new_for_bus_sync(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, |
| kWpaSupplicantServiceName, networkPath, nullptr, |
| &MakeUniquePointerReceiver(err).Get())); |
| if (networkInfo == nullptr) |
| { |
| return CHIP_ERROR_INTERNAL; |
| } |
| |
| network.connected = wpa_fi_w1_wpa_supplicant1_network_get_enabled(networkInfo.get()); |
| GVariant * properties = wpa_fi_w1_wpa_supplicant1_network_get_properties(networkInfo.get()); |
| GVariant * ssid = g_variant_lookup_value(properties, "ssid", nullptr); |
| gsize length; |
| const gchar * ssidStr = g_variant_get_string(ssid, &length); |
| // TODO: wpa_supplicant will return ssid with quotes! We should have a better way to get the actual ssid in bytes. |
| gsize length_actual = length - 2; |
| VerifyOrReturnError(length_actual <= sizeof(network.networkID), CHIP_ERROR_INTERNAL); |
| ChipLogDetail(DeviceLayer, "Current connected network: %s", StringOrNullMarker(ssidStr)); |
| memcpy(network.networkID, ssidStr + 1, length_actual); |
| network.networkIDLen = length_actual; |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::StopAutoScan() |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| VerifyOrReturnError(mWpaSupplicant.iface != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| std::unique_ptr<GError, GErrorDeleter> err; |
| gboolean result; |
| |
| ChipLogDetail(DeviceLayer, "wpa_supplicant: disabling auto scan"); |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_auto_scan_sync( |
| mWpaSupplicant.iface, "" /* empty string means disabling auto scan */, nullptr, &MakeUniquePointerReceiver(err).Get()); |
| if (!result) |
| { |
| ChipLogError(DeviceLayer, "wpa_supplicant: Failed to stop auto network scan: %s", err ? err->message : "unknown"); |
| return CHIP_ERROR_INTERNAL; |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ConnectivityManagerImpl::StartWiFiScan(ByteSpan ssid, WiFiDriver::ScanCallback * callback) |
| { |
| std::lock_guard<std::mutex> lock(mWpaSupplicantMutex); |
| VerifyOrReturnError(mWpaSupplicant.iface != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| // There is another ongoing scan request, reject the new one. |
| VerifyOrReturnError(mpScanCallback == nullptr, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(ssid.size() <= sizeof(sInterestedSSID), CHIP_ERROR_INVALID_ARGUMENT); |
| |
| CHIP_ERROR ret = CHIP_NO_ERROR; |
| GError * err = nullptr; |
| GVariant * args = nullptr; |
| GVariantBuilder builder; |
| gboolean result; |
| |
| memcpy(sInterestedSSID, ssid.data(), ssid.size()); |
| sInterestedSSIDLen = ssid.size(); |
| |
| g_variant_builder_init(&builder, G_VARIANT_TYPE_VARDICT); |
| g_variant_builder_add(&builder, "{sv}", "Type", g_variant_new_string("active")); |
| args = g_variant_builder_end(&builder); |
| |
| result = wpa_fi_w1_wpa_supplicant1_interface_call_scan_sync(mWpaSupplicant.iface, args, nullptr, &err); |
| |
| if (result) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: initialized network scan."); |
| mpScanCallback = callback; |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: failed to start network scan: %s", err ? err->message : "unknown error"); |
| ret = CHIP_ERROR_INTERNAL; |
| } |
| |
| if (err != nullptr) |
| { |
| g_error_free(err); |
| } |
| return ret; |
| } |
| |
| namespace { |
| // wpa_supplicant's scan results don't contains the channel infomation, so we need this lookup table for resolving the band and |
| // channel infomation. |
| std::pair<WiFiBand, uint16_t> GetBandAndChannelFromFrequency(uint32_t freq) |
| { |
| std::pair<WiFiBand, uint16_t> ret = std::make_pair(WiFiBand::k2g4, 0); |
| if (freq <= 2472) |
| { |
| ret.second = static_cast<uint16_t>((freq - 2412) / 5 + 1); |
| } |
| else if (freq == 2484) |
| { |
| ret.second = 14; |
| } |
| else if (freq >= 3600 && freq <= 3700) |
| { |
| // Note: There are not many devices supports this band, and this band contains rational frequency in MHz, need to figure out |
| // the behavior of wpa_supplicant in this case. |
| ret.first = WiFiBand::k3g65; |
| } |
| else if (freq >= 5035 && freq <= 5945) |
| { |
| ret.first = WiFiBand::k5g; |
| ret.second = static_cast<uint16_t>((freq - 5000) / 5); |
| } |
| else if (freq == 5960 || freq == 5980) |
| { |
| ret.first = WiFiBand::k5g; |
| ret.second = static_cast<uint16_t>((freq - 5000) / 5); |
| } |
| else if (freq >= 5955) |
| { |
| ret.first = WiFiBand::k6g; |
| ret.second = static_cast<uint16_t>((freq - 5950) / 5); |
| } |
| else if (freq >= 58000) |
| { |
| ret.first = WiFiBand::k60g; |
| // Note: Some channel has the same center frequency but different bandwidth. Should figure out wpa_supplicant's behavior in |
| // this case. Also, wpa_supplicant's frequency property is uint16 infact. |
| switch (freq) |
| { |
| case 58'320: |
| ret.second = 1; |
| break; |
| case 60'480: |
| ret.second = 2; |
| break; |
| case 62'640: |
| ret.second = 3; |
| break; |
| case 64'800: |
| ret.second = 4; |
| break; |
| case 66'960: |
| ret.second = 5; |
| break; |
| case 69'120: |
| ret.second = 6; |
| break; |
| case 59'400: |
| ret.second = 9; |
| break; |
| case 61'560: |
| ret.second = 10; |
| break; |
| case 63'720: |
| ret.second = 11; |
| break; |
| case 65'880: |
| ret.second = 12; |
| break; |
| case 68'040: |
| ret.second = 13; |
| break; |
| } |
| } |
| return ret; |
| } |
| } // namespace |
| |
| bool ConnectivityManagerImpl::_GetBssInfo(const gchar * bssPath, NetworkCommissioning::WiFiScanResponse & result) |
| { |
| std::unique_ptr<GError, GErrorDeleter> err; |
| std::unique_ptr<WpaFiW1Wpa_supplicant1BSS, GObjectDeleter> bss( |
| wpa_fi_w1_wpa_supplicant1_bss_proxy_new_for_bus_sync(G_BUS_TYPE_SYSTEM, G_DBUS_PROXY_FLAGS_NONE, kWpaSupplicantServiceName, |
| bssPath, nullptr, &MakeUniquePointerReceiver(err).Get())); |
| |
| if (bss == nullptr) |
| { |
| return false; |
| } |
| |
| WpaFiW1Wpa_supplicant1BSSProxy * bssProxy = WPA_FI_W1_WPA_SUPPLICANT1_BSS_PROXY(bss.get()); |
| |
| std::unique_ptr<GVariant, GVariantDeleter> ssid(g_dbus_proxy_get_cached_property(G_DBUS_PROXY(bssProxy), "SSID")); |
| std::unique_ptr<GVariant, GVariantDeleter> bssid(g_dbus_proxy_get_cached_property(G_DBUS_PROXY(bssProxy), "BSSID")); |
| |
| // Network scan is performed in the background, so the BSS |
| // may be gone when we try to get the properties. |
| if (ssid == nullptr || bssid == nullptr) |
| { |
| ChipLogDetail(DeviceLayer, "wpa_supplicant: BSS not found: %s", StringOrNullMarker(bssPath)); |
| return false; |
| } |
| |
| const guchar * ssidStr = nullptr; |
| const guchar * bssidBuf = nullptr; |
| char bssidStr[2 * 6 + 5 + 1] = { 0 }; |
| gsize ssidLen = 0; |
| gsize bssidLen = 0; |
| gint16 signal = wpa_fi_w1_wpa_supplicant1_bss_get_signal(bss.get()); |
| guint16 frequency = wpa_fi_w1_wpa_supplicant1_bss_get_frequency(bss.get()); |
| |
| ssidStr = reinterpret_cast<const guchar *>(g_variant_get_fixed_array(ssid.get(), &ssidLen, sizeof(guchar))); |
| bssidBuf = reinterpret_cast<const guchar *>(g_variant_get_fixed_array(bssid.get(), &bssidLen, sizeof(guchar))); |
| |
| if (bssidLen == 6) |
| { |
| snprintf(bssidStr, sizeof(bssidStr), "%02x:%02x:%02x:%02x:%02x:%02x", bssidBuf[0], bssidBuf[1], bssidBuf[2], bssidBuf[3], |
| bssidBuf[4], bssidBuf[5]); |
| } |
| else |
| { |
| bssidLen = 0; |
| ChipLogError(DeviceLayer, "Got a network with bssid not equals to 6"); |
| } |
| ChipLogDetail(DeviceLayer, "Network Found: %.*s (%s) Signal:%d", int(ssidLen), StringOrNullMarker((const gchar *) ssidStr), |
| bssidStr, signal); |
| |
| // A flag for enterprise encryption option to avoid returning open for these networks by mistake |
| // TODO: The following code will mistakenly recognize WEP encryption as OPEN network, this should be fixed by reading |
| // IEs (information elements) field instead of reading cooked data. |
| |
| static constexpr uint8_t kEAP = (1 << 7); |
| |
| auto IsNetworkWPAPSK = [](GVariant * wpa) -> uint8_t { |
| if (wpa == nullptr) |
| { |
| return 0; |
| } |
| |
| GVariant * keyMgmt = g_variant_lookup_value(wpa, "KeyMgmt", nullptr); |
| if (keyMgmt == nullptr) |
| { |
| return 0; |
| } |
| const gchar ** keyMgmts = g_variant_get_strv(keyMgmt, nullptr); |
| const gchar ** keyMgmtsForFree = keyMgmts; |
| uint8_t res = 0; |
| for (const gchar * keyMgmtVal = (keyMgmts != nullptr ? *keyMgmts : nullptr); keyMgmtVal != nullptr; |
| keyMgmtVal = *(++keyMgmts)) |
| { |
| if (g_strcasecmp(keyMgmtVal, "wpa-psk") == 0 || g_strcasecmp(keyMgmtVal, "wpa-none") == 0) |
| { |
| res |= (1 << 2); // SecurityType::WPA_PERSONAL |
| } |
| else if (g_strcasecmp(keyMgmtVal, "wpa-eap")) |
| { |
| res |= (kEAP); |
| } |
| } |
| g_variant_unref(keyMgmt); |
| g_free(keyMgmtsForFree); |
| return res; |
| }; |
| auto IsNetworkWPA2PSK = [](GVariant * rsn) -> uint8_t { |
| if (rsn == nullptr) |
| { |
| return 0; |
| } |
| GVariant * keyMgmt = g_variant_lookup_value(rsn, "KeyMgmt", nullptr); |
| if (keyMgmt == nullptr) |
| { |
| return 0; |
| } |
| const gchar ** keyMgmts = g_variant_get_strv(keyMgmt, nullptr); |
| const gchar ** keyMgmtsForFree = keyMgmts; |
| uint8_t res = 0; |
| for (const gchar * keyMgmtVal = (keyMgmts != nullptr ? *keyMgmts : nullptr); keyMgmtVal != nullptr; |
| keyMgmtVal = *(++keyMgmts)) |
| { |
| if (g_strcasecmp(keyMgmtVal, "wpa-psk") == 0 || g_strcasecmp(keyMgmtVal, "wpa-psk-sha256") == 0 || |
| g_strcasecmp(keyMgmtVal, "wpa-ft-psk") == 0) |
| { |
| res |= (1 << 3); // SecurityType::WPA2_PERSONAL |
| } |
| else if (g_strcasecmp(keyMgmtVal, "wpa-eap") == 0 || g_strcasecmp(keyMgmtVal, "wpa-eap-sha256") == 0 || |
| g_strcasecmp(keyMgmtVal, "wpa-ft-eap") == 0) |
| { |
| res |= kEAP; |
| } |
| else if (g_strcasecmp(keyMgmtVal, "sae") == 0) |
| { |
| // wpa_supplicant will include "sae" in KeyMgmt field for WPA3 WiFi, this is not included in the wpa_supplicant |
| // document. |
| res |= (1 << 4); // SecurityType::WPA3_PERSONAL |
| } |
| } |
| g_variant_unref(keyMgmt); |
| g_free(keyMgmtsForFree); |
| return res; |
| }; |
| auto GetNetworkSecurityType = [IsNetworkWPAPSK, IsNetworkWPA2PSK](WpaFiW1Wpa_supplicant1BSSProxy * proxy) -> uint8_t { |
| std::unique_ptr<GVariant, GVariantDeleter> wpa(g_dbus_proxy_get_cached_property(G_DBUS_PROXY(proxy), "WPA")); |
| std::unique_ptr<GVariant, GVariantDeleter> rsn(g_dbus_proxy_get_cached_property(G_DBUS_PROXY(proxy), "RSN")); |
| |
| uint8_t res = IsNetworkWPAPSK(wpa.get()) | IsNetworkWPA2PSK(rsn.get()); |
| if (res == 0) |
| { |
| res = 1; // Open |
| } |
| return res & (0x7F); |
| }; |
| |
| // Drop the network if its SSID or BSSID is illegal. |
| VerifyOrReturnError(ssidLen <= kMaxWiFiSSIDLength, false); |
| VerifyOrReturnError(bssidLen == kWiFiBSSIDLength, false); |
| memcpy(result.ssid, ssidStr, ssidLen); |
| memcpy(result.bssid, bssidBuf, bssidLen); |
| result.ssidLen = ssidLen; |
| if (signal < INT8_MIN) |
| { |
| result.rssi = INT8_MIN; |
| } |
| else if (signal > INT8_MAX) |
| { |
| result.rssi = INT8_MAX; |
| } |
| else |
| { |
| result.rssi = static_cast<uint8_t>(signal); |
| } |
| |
| auto bandInfo = GetBandAndChannelFromFrequency(frequency); |
| result.wiFiBand = bandInfo.first; |
| result.channel = bandInfo.second; |
| result.security.SetRaw(GetNetworkSecurityType(bssProxy)); |
| |
| return true; |
| } |
| |
| void ConnectivityManagerImpl::_OnWpaInterfaceScanDone(GObject * source_object, GAsyncResult * res, gpointer user_data) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: network scan done"); |
| gchar ** bsss = wpa_fi_w1_wpa_supplicant1_interface_dup_bsss(mWpaSupplicant.iface); |
| gchar ** oldBsss = bsss; |
| if (bsss == nullptr) |
| { |
| ChipLogProgress(DeviceLayer, "wpa_supplicant: no network found"); |
| DeviceLayer::SystemLayer().ScheduleLambda([]() { |
| if (mpScanCallback != nullptr) |
| { |
| mpScanCallback->OnFinished(Status::kSuccess, CharSpan(), nullptr); |
| mpScanCallback = nullptr; |
| } |
| }); |
| return; |
| } |
| |
| std::vector<WiFiScanResponse> * networkScanned = new std::vector<WiFiScanResponse>(); |
| for (const gchar * bssPath = (bsss != nullptr ? *bsss : nullptr); bssPath != nullptr; bssPath = *(++bsss)) |
| { |
| WiFiScanResponse network; |
| if (_GetBssInfo(bssPath, network)) |
| { |
| if (sInterestedSSIDLen == 0) |
| { |
| networkScanned->push_back(network); |
| } |
| else if (network.ssidLen == sInterestedSSIDLen && memcmp(network.ssid, sInterestedSSID, sInterestedSSIDLen) == 0) |
| { |
| networkScanned->push_back(network); |
| } |
| } |
| } |
| |
| DeviceLayer::SystemLayer().ScheduleLambda([networkScanned]() { |
| // Note: We cannot post a event in ScheduleLambda since std::vector is not trivial copiable. This results in the use of |
| // const_cast but should be fine for almost all cases, since we actually handled the ownership of this element to this |
| // lambda. |
| if (mpScanCallback != nullptr) |
| { |
| LinuxScanResponseIterator<WiFiScanResponse> iter(const_cast<std::vector<WiFiScanResponse> *>(networkScanned)); |
| mpScanCallback->OnFinished(Status::kSuccess, CharSpan(), &iter); |
| mpScanCallback = nullptr; |
| } |
| |
| delete const_cast<std::vector<WiFiScanResponse> *>(networkScanned); |
| }); |
| |
| g_strfreev(oldBsss); |
| } |
| |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WPA |
| |
| } // namespace DeviceLayer |
| } // namespace chip |
