| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 69.2.2. [TC-BOOL-2.2] Primary Functionality with Server as DUT |
| |
| PICS: |
| - BOOL.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Pre-Conditions" |
| verification: | |
| This test case is verified after the device is provisioned. Pls provision device first, Pass appropriate nodeID in the below command |
| disabled: true |
| |
| - label: |
| "Step 1: Commission DUT to TH (can be skipped if done in a preceding |
| test)." |
| verification: | |
| |
| disabled: true |
| |
| - label: "Step 2a: Bring the DUT into a state so StateValue is FALSE." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.A0000 |
| verification: | |
| Manual operation |
| disabled: true |
| |
| - label: "Step 2b: TH reads the StateValue attribute from the DUT." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.A0000 |
| verification: | |
| ./chip-tool booleanstate read state-value 1 1 |
| |
| Verify the StateValue value is FALSE On TH(chip-tool), below is the sample log provided for the raspi platform |
| |
| [1646118838.087500][3279:3284] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0045 Attribute 0x0000_0000DataVersion: 2127727071 |
| [1646118838.087536][3279:3284] CHIP:TOO: StateValue: FALSE |
| disabled: true |
| |
| - label: "Step 3a: Bring the DUT into a state so StateValue is TRUE." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.A0000 |
| verification: | |
| Manual operation |
| disabled: true |
| |
| - label: "Step 3b: TH reads the StateValue attribute from the DUT." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.A0000 |
| verification: | |
| ./chip-tool booleanstate read state-value 1 1 |
| |
| Verify the StateValue value is TRUE On TH(chip-tool), below is the sample log provided for the raspi platform |
| |
| [1646118838.087500][3279:3284] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0045 Attribute 0x0000_0000DataVersion: 2127727071 |
| [1646118838.087536][3279:3284] CHIP:TOO: StateValue: TRUE |
| disabled: true |
| |
| - label: "Step 4a: Set up subscription to StateChange event." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.E00 && BOOL.S.A0000 |
| verification: | |
| This event is not supported in all clusters app, so there are no reference logs. |
| |
| Run the below command to start interactive mode |
| ./chip-tool interactive start |
| |
| Subscribe the event using below command in Interactive mode. Once the event occurs, TH(chip-tool) get the subscription message. |
| |
| booleanstate subscribe-event state-change 1 100 1 1 --is-urgent true |
| disabled: true |
| |
| - label: "Step 4b: Bring the DUT into a state so StateValue is FALSE." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.E00 && BOOL.S.A0000 |
| verification: | |
| Verify the StateValue value is FALSE On TH(chip-tool), if the state-change event is generated |
| disabled: true |
| |
| - label: "Step 4c: TH reads the StateValue attribute from the DUT." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.E00 && BOOL.S.A0000 |
| verification: | |
| This event is not supported in all clusters app, so there are no reference logs. |
| |
| booleanstate read state-value 1 1 |
| |
| Verify the StateValue value is FALSE On TH(chip-tool) |
| disabled: true |
| |
| - label: "Step 4d: Bring the DUT into a state so StateValue is TRUE." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.E00 && BOOL.S.A0000 |
| verification: | |
| Verify the StateValue value is TRUE On TH(chip-tool), if the state-change event is generated |
| disabled: true |
| |
| - label: "Step 4e: TH reads the StateValue attribute from the DUT." |
| PICS: BOOL.S.M.ManuallyControlled && BOOL.S.E00 && BOOL.S.A0000 |
| verification: | |
| booleanstate read state-value 1 1 |
| |
| Verify the StateValue value is TRUE On TH(chip-tool) |
| disabled: true |